8 best osd audio home amplifiers

• BRING ON THE BASS: A highly efficiency Class D subwoofer amplifier that serves up big bass with up to 200W max power 120W RMS for deep, rich and distortion-free low frequency sound effects
• WORKS WITH ALL RECEIVERS: Compatible with older and newer source equipment and includes both RCA and speaker level input/outputs for greater flexibility with various home theater audio systems
• ADJUSTABLE CONTROLS: Includes auto on/off sensing as well as phase, crossover and volume controls to dial in just the right amount of bass
• EFFICIENT CLASS D TECHNOLOGY: A highly efficient Class D sub amp that is ideal for budget-minded users who want a feature-rich digital sub amp that does not run hot or take up a lot of space
• COMPACT DESIGN: Measures less than 9 inches wide and less than 10 inches deeps so it can fit just about anywhere

User questions & answers

Question:	Hi, is it possible to connect the smp100 in speaker level out of an active subwoofer (yamaha ns-sw300bl) to connect a second (passive) subwoofer
Answer:	Yes, this will work with it. Keep in mind this pre-amp is more entry level, not necessarily on the same level as the Carver amp.
Question:	Does the SMP100 require a 12v trigger cable to work properly
Answer:	I don't see why you couldn't. The outputs include RCAs. I have it hooked up to a vintage Peavey 500, very clean sound.
Question:	Anyone have an issue with the speaker out port not working
Answer:	You could equalize (Bass/Midrange/Treble/Loudness/Balance Control) coming in from the TV, and then output from the Pre-1 to input of your choice on the Yamaha receiver.
Question:	how much power rms at 8 ohms
Answer:	From the manual Input Sensitivity/Impedance Mic 0.5V/600 Ohms Phono 3mV/47k Ohms Tape,Tuner, CD/DVD, Aux 150mV/47k Ohms Output Level/Impedance Tape Rec 150mV/100k Ohms Pre Output 500mV/47k Ohms Total Harmonic Distortion Mic less than 0.4% Phono less than 0.4% Tape,Tuner, CD/DVD, Aux less than 0.2% Signal to Noise Ratio Mic more than 50dB Phono more than 70dB Tape,Tuner, CD/DVD, Aux more than 80dB Frequency Response 5Hz - 30kHz +0 -3dB Tone Control Bass ± 12dB @ 100Hz Midrange ± 6dB @ 1kHz Treble ± 12dB @ 10kHz Loudness Control +4/0/+2dB @ 100/1k/10kHz Power Requirements AC 120V 60Hz / 220V 50Hz Dimensions 18.9" x 2.36" x 8.25"

Product features

High Current Power

The amplifiers are 4 ohm stable, which doubles the current demand output and can power two 8 ohm subwoofers wired in parallel.

Phase Control

The phase control operates over a range of 0 to 180 degrees and compensates for a delay between the subwoofer and the main speakers.

Crossover Control

The advanced crossover circuit can be set at different frequency ranges (35Hz to 160Hz) and can be adjusted with the front-panel control knob.

Class D Digital Amplifier Technology

Highly efficient Class D technology runs cool under demanding loads and doesn't take up a lot of space.

OSD Audio 200 Watt Subwoofer Amplifier

Our SMP200 Class D digital subwoofer amplifier may be compact, but with 200W of power, this little amp packs a powerful punch. It supplies an in-wall or stand-alone subwoofer with the power it needs so you can experience that gut wrenching, heart pounding low frequency impact (bass) on movie and music soundtracks.

Product description

Get ready to jam in any outdoor or indoor space with the these 4" patio speakers. This set is ideal for your lawn, garden, patio, pool area or in your home theater. You'll love the sound these speakers produce, and they're available in black or white. The speakers include mounting brackets that will allow you to mount either vertically or horizontal. We recommend to place the speakers anywhere from 8 to 12 feet apart for best stereo dispersion.

• MINI CLASS D AMP: A compact and affordable 60W Class D mini amp that delivers clean, reliable power to two-channel audio systems and includes bridge mode. Use bridge mode to add a second XMP60 to double your power to send a mono signal to two single 8-ohm speakers (one XMP60 per speaker)
• OUTDOOR: The OSD Audio 3 Way Outdoor Patio Speaker Pair has the ability to handle temperature fluctuations from –20F to 200F during changing seasons.
• MOUNT: The included flexible mounting brackets allow you to mount the speaker either vertically or horizontally. Install speaker under a covered area for the best results.
• DOUBLES AS A MIXER: Includes a front-mounted ¼” microphone input for PA systems and even doubles as an audio mixer combining the microphone (with dedicated volume control) and Stereo input (both controlled by master volume control)
• HIGHLY EFFICIENT: Uses Class D digital amplifier technology for efficient power that uses a minimal amount of electricity with no distracting fan noise

• HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to four zones
• RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems
• AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms)
• CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits
• SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included)

User questions & answers

Question:	Can all 8 channels be used in 1 zone (as a 4ch amp
Answer:	No case, no charger. You need to buy the complete package if you want case, charger, batteries. I ended up sending it back and reordering.
Question:	im Trying to power 6 speakers in 3 zones in a restaurant. Can this unit play to all zones at the same time or is it only 1 zone at a time powered
Answer:	The ACDelco ARD847LI 3 Piece Tool Combo Kit features a Li-Ion 8V 3/8" Drive Impact Wrench along with a Li-Ion 8V Drill/Driver and Li-Ion 8V LED Flashlight. This item is in stock. Orders received prior to 2:00 pm Eastern Time ship same day.Best regards,Shari, ToolSource Product Manager
Question:	I have six different rooms with speakers wired. Can I use this to power and turn on/off rooms? I.e. kitchen and living room on and dining room off
Answer:	Its a little tight to get the socket on. It's hard the socket because of the snap ring, but you can get on
Question:	What class is this amplifier? class a/b, class d
Answer:	The tools only accept 8 volt batteries

Product features

Sound Quality

These amplifiers are serious contenders for complex audio systems and will distribute sound to different locations without overload.

Inputs

Most offer a choice of direct channel input or dual universal bus inputs are options for each channel.

Class D Digital Technology

Highly efficient Class D technology runs cool under demanding loads and doesn't take up a lot of space.

Channels

Multi-channel eliminate the complexity of wiring up multiple two-channel amps and save space by reducing the number of components needed,

OSD Audio 4-Zone 8-Channel Class D Amplifier

Our MX880 is a powerful 4-zone 8-channel digital amplifier for commercial and residential audio systems that require reliable power in multiple zones. The MX880 includes eight channels rated at 80 Watts each at 4 ohms and can be configured as the main amplifier for an audio distribution system such as for background music, paging, and multi-zone audio or as an amplifier for 5.1 or 7.2 home theater surround sound systems.

• SOUND QUALITY: The PAM-1270 puts out 60 Watts per channel and can operate as 6 independent stereo zone amplifiers or 12 zone mono channels. It’s the perfect foundation for a custom home theater stereo.
• POWER: This amplifier is a 12-channel Class D amp that supplies clean power to hear every detail in music and movies with accuracy. It can be matched with in-wall or freestanding loudspeakers.
• DESIGN: A brushed metal finish and front panel indicators add a high-tech ambiance to any equipment rack. It is designed with a high-output power supply and ample heat to keep things cool.
• INSTALLATION: There are both balanced and unbalanced inputs for flexible installation options and long or short cable runs.
• MOUNT: The PAM-1270 is designed to mount into standard 19 inch racks or on flat, horizontal surfaces. It can be placed in numerous locations in your house.

User questions & answers

Question:	Can you use both 70v and 8ohm on this i see there is a switch to select but not sure
Answer:	This is a passive speaker and requires no electricity. Just connect speaker wires from your subwoofer amp.
Question:	How many speakers can i plug in to each zone
Answer:	Hello, the Unit Dimensions: (L x H x D) 22" x 17.5" x 4.3", and the Cutout Dimensions: (L x H) 20" x 14.5".
Question:	I have a keypad with 4 connects: vdc, ground, keypad data out and status in. Can I use it with this amp? The keypad model is B&K ck1.2. Thx
Answer:	Although the back box was built to fire rated specs, there is no certification.
Question:	what is the wattage per channel
Answer:	Hello, this is a passive subwoofer so an amplifier is needed. We recommend our SMP500 subwoofer amplifier which you can find on Amazon, just search the ASIN: B07F94FSLF

Product features

MOUNT DESIGN

The PAM-1270 is designed for mounting into standard 19" (483mm) racks or on flat horizontal surfaces. If mounted in an equipment cabinet or other confining location, allow at least 2 inches of space above the top cover.

HOME AUTOMATION SYSTEM

Any amplifier with no signal at its input is automatically shut off and the PAM-1270 is Multi Voltage; able to operate either on 110V-120V/60Hz or 220V-240V /50Hz AC mains.

INPUT

This has up to 6 stereo Zones (4-ohm or 70-Volt at 50Watts/channel), 6 mono/bridged Zone amplifiers (110 Watt bridged 8-ohm). Each zone can be configured independently allowing a combination of Stereo 4-ohm or 70Volt and Mono/Bridged 8-ohm.

12-Channel 6-Zone 70V/100V/8 Ohm Commercial Multi Combination Amplifier with IR Remote Control

The OSD PAM-1270 is a major step forward in installation amplifiers technology. It features either Twelve Zone mono channels (70V) or Six Stereo Zones (8/4 Ohm) or a combination of both 70V and 8/4 Ohm 85% class D design technology, can operate as 6 independent Stereo Zone amplifiers. Self-explanatory Input and Output connections are easy to follow since any of the 12 mono amplifiers can be connected to either 70-Volt, 8-Ohm or 4-ohm speaker circuits.

Product description

Give your home entertainment system a cinematic upgrade. The powerful 7.2 channel receiver supports the latest three-dimensional surround sound audio formats including Dolby Atmos and DTS: x, drawing you into the middle of the action you see on screen. And with 4K Ultra HD picture quality, and Dolby Vision, that’ll transform your viewing experiences, you’ll enjoy an immersive theater-like experience in the comfort of your own home. Input Output Terminals: Audio Input Opt , Audio Input Coax , Analog Audio Input , Pre Out Subwoofer , Headphone Output , USB (for power supply only)

• Cinematic Sound at Home: Enjoy your favorite movies, TV shows and more with theater like sound in the comfort of your home
• BREATHTAKING AUDIO: Dolby Atmos and DTS: X delivers multi-dimensional and object-based surround sound
• BREATHTAKING AUDIO: Dolby Atmos and DTS:X deliver multi-dimensional and object-based surround sound
• STUNNING 4K QUALITY: 4K HDR pass through with support for Dolby Vision, HDR10, and Hybrid Log Gamma provides greater and clearer color, contrast, and brightness
• GET CONNECTED: 4 in/1 out HDMI each and 1 optical / 1 coaxial digital and analog audio connections
• AUTO CALIBRATION: Advanced D.C.A.C. analyzes and adjusts the audio for optimal sound in every room
• SMARTER CONNECTIVITY: Stream music and use Bluetooth Standby turn on the receiver from your phone

User questions & answers

Question:	How do you keep the display on the front from turning off after a few seconds? My screen stays blank unless I hit display or adjust the volume
Answer:	It’s 9 channels powered. 2 outputs for the subs If you are wiring 11 channels you will need an additional 2 channel amp or go to the 6700h
Question:	Does this allow hdr passthrough for xbox one x
Answer:	SURE CAN! I HAVE A FIRESTICK (4K) PLUGGED INTO A HDMI PORT ON THE BACK, AND IT PERFORMS PERFECTLY. I DO BOTH AMAZON AND NETFLIX FROM IT, BETTER THAN LG APPLICATION TV USES.
Question:	Tv has amazon and netflix. when i turn the receiver to tv mod and try to watch either netflix or amazon i can get the picture but no sound. thoughs
Answer:	I have not heard a 3500, and I own a 4500. According to this reference (https://www.avsforum.com/forum/90-receivers-amps-processors/2973392-official-2018-denon-s-series-x-series-avr-owner-s-thread-faq-posts-1-8-a.html) what the 4500 adds over 3500 is below. Looks like the 3500 does not have AL32 processing, which is significant imo. Also the 3500 will not get the "IMAX Enhanced" certification & modes coming to the X4500 and 6500 (no one knows if those are any good, but worth noting). --- Upgrading from the X3500H adds: 2 additional on board amps for 9CH on board processing (ie. 7.1.2 or 5.1.4; with capability to expand to 11CH processing (ie. 7.1.4) using an external 2CH amp), 11.2 main zone pre-outs, Zone 3 (same inputs as Zone 2 except not HDMI), a 2nd 12v trigger, front panel display of speaker inputs (or outputs), metal front panel with 2 line display, Custom 2 CH main zone settings (using FL/FR or dedicated Front B; LARGE/SMALL; crossover settings, sub – on/off, distance, level), two internal cooling fans, Auro 3D/Auromatic, AL32 Processing, Bass Sync; Remote Control able to store preset codes from other mfr devices (see below) and the ability to add Auro 3D Voice of God/Top Surround via the Subwoofer pre-out 2 only. Audyssey (but not Dynamic EQ, Dynamic Volume, LFC) enabled when DTS Virtual:X is selected. ---
Question:	Found a bug. when playing music and i turn on the tv, gets stuck in muting/unmuting loop until a reboot. dae see this
Answer:	Will not pass through 4k @ 120Hz or 8k @ 60Hz do to a bottleneck of the Panasonic chip used. This impacts the all the 2020 Denon AVRs and most mfg claiming HDMI 2.1 compatible. The work around us to connect your pc or console directly to your HDMI 2.1 TV and use the TVs eARC back to the AVR. Even then not all TVs pass lossless via eARC equally.

Product features

Get lost in the action with Dolby Atmos

Dolby Atmos delivers breathtaking realism with 360º surround sound by accurately positioning sound from every angle in your environment – even from above. The result is rich audio that completely envelops you.

Lifelike sound whatever the setup with DTS:X

DTS:X decoding delivers multi-dimensional surround sound that adapts to your speaker configuration in real time. Sound is positioned precisely around and above you, thanks to object-based audio decoding.

Product description

Stereo Power Amplifier 2 x 120 Watt Mini Stereo Power Amplifier - 2 x 120 Watt with AUX CD and Mic Inputs RCA REC Output 1/4'' MIC Input Jack 1/4'' Headphone Jack Power On LED Indicator 110/220 Voltage Selector 2 x 120 Watt Peak at 4-Ohm Blue LED Output Level Display 3 5mm Aux CD/MP3 Input Jack Switchable MIC Pager and Mixing Modes Four Push Type Speaker L/R Terminals Switchable AUX1/AUX2/CD and RCA Input Bass Treble Balance Master and Mic Volume Controls Dimensions 8 27''W x 2 72''H x 5 39''D Pyle PTA4 Home Amplifier is perfect for powering any stereo system Complete with AUX/CD inputs and 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls a slick blue LED output level display L/R RCA inputs and 4 speaker outputs Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound This small but powerful amp delivers clear and crisp audio for it listener Durable and affordable this amp is made to last

From the Manufacturer

• 2X120 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
• 4 INPUTS: This personal digital amp box supports various external sources 3 pairs RCA audio input for tuner, CD player, tape deck, camcorder or VCR, 1/4" microphone IN, 1/4" headphone jack input. Also features a REC output for recording
• PAGER/MIXING MODE: The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session
• PUSH TYPE SPEAKER TERMINAL: The sound amplifying mixer device lets you easily connect speaker wires directly to the amplifier. The total speaker impedance must be at least 4 Ohm per channel at stereo mode
• EQ CONTROLS: The improved professional compact bookshelf sound amplifier features crisp and responsive button for power switch and rotary knob controls for mic volume, balance, bass, treble, master volume, and input source

Product features

Home Audio Power Amplifier System

The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio

2-CHANNEL AMPLIFIER

Famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

EQ CONTROLS

The improved professional compact bookshelf sound amplifier features crisp and responsive button for power switch and rotary knob controls for mic volume, balance, bass, treble, master volume, and input source

PUSH TYPE SPEAKER TERMINAL

The sound amplifying mixer device lets you easily connect speaker wires directly to the amplifier. The total speaker impedance must be at least 4 Ohm per channel at stereo mode

CONNECT & STREAM

This simple to use and durable amp has bass and treble controls is perfect for powering any stereo system

3.5MM AUX

This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

DIMENSIONS

This Mini stereo amplifier has a 8.27 inches Length, 5.39 inches Width and 2.72 inches Height.

Product description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last. Features: Harmonic Distortion: 0.3% 2 x 120 Watt RMS at four Ohms Blue LED Output Level Display Frequency Response: 20 Hz-20 kHz Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches) Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz) Dimensions: 8.27’’ x 2.72’’ x 5.39’’ inches.

From the Manufacturer

• 2X120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your PA & home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4 8 ohms impedance, enjoy high quality music & movies
• MULTIPLE INPUTS: This personal portable digital amp box supports various external sources 3 3.5mm AUX for tuner, CD DVD, MP3, computer, iPad, iPhone & cell phone, 1/4" mic in & 1/4" headphone jack input. Also features a REC RCA output for recording
• PAGER/MIXING MODE: The professional integrated stereo receiver features pager & mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting & meetings. Switch to mixing mode for a fun karaoke session. Dimensions (W x H x D): 8.2x 6.6x 2.8 inches
• USB 2.0 INPUT: It features a USB input to support flash drives or similar USB devices w/ LED indicator beside the port. It allows you to play your favorite audio files from your computer's media library when you connect it directly to the amplifier. Rated power input 750mV
• EQ CONTROLS: The improved compact bookshelf sound amplifier features crisp & responsive buttons for power switch, MP3 controls previous, next, play/pause & rotary knob controls for input select, MIC, master, balance, bass & treble volume controls

User questions & answers

Question:	is it safe to hook up the sony ss-b1000 5-1/4 inch book shelfspeakers to this amp
Answer:	Yes, assuming you hook them up correctly!. I have some 70's vintage Technics speakers running on it just fine.
Question:	I hear "static" at low volume (definitely not the speskers). Any suggestions
Answer:	Disconnect your input source to the amplifier. If the noise goes away, then it's coming from the source and not the amplifier. If the noise continues, disconnect all inputs. If you hear the noise, the problem is likely the amplifier.
Question:	is there a way to hook up to a new flat screen tv to run a set of external speakers
Answer:	You asked this a while ago, so I'm guessing you've found out by now. This receiver does not have HDMI or Optical inputs, only RCA inputs. Most new TVs no longer come with RCA out, but many have a headphone output. If your TV has a headphone output, you can get a headphone to RCA adapter and use that to connect to this receiver.
Question:	Can I run an RCA cord from my TV to this amp? The input/output schematic does not show a TV
Answer:	All 3 inputs are RCA, just pick one :) Just because it says "CD" or "Aux" doesn't specifically mean you must use that device, RCA is RCA. However, I wouldn't recommend purchasing it. Mine died (non smoking house, didn't overheat or push it too far) within 1 month of use. I decided to go with the Dayton Audio APA150, which has been a workhorse since day 1 with no issues and much better consumer ratings than this Pyle of junk. Happy hunting.

Product description

Pyle Model : PFA600BUCompact Desktop PA Amplifier System Bluetooth Public Address Amplifier Compact PA Speaker & Microphone Receiver System with Mic Inputs, MP3/USB/SD Readers, FM Radio (300 Watt) Features: PA Public Address Amplifier Receiver Compact Desktop Audio Source System Provides Convenient Microphone & Speaker Control Builtin Bluetooth for Wireless Audio Streaming Integrated ButtonActivated Siren Alarm Function FM Radio with Digital LCD Display Connect & Stream Audio from External DevicesMP3 Digital Audio File Playback Compatible USB Flash & SD Memory Card Readers USB Port Doubles as Device Charge Port Quick Connect Speaker Terminals (3. 5mm) Input 1/4’’ inch Mic Input Jacks (Mic1, Mic2)Front Panel Button Control Center LED Audio Output Indicator Lights Independent Audio Channel Rotary Volume Adjustment Optional 12V DC Power Input Terminals What's in the Box: PA Amplifier Remote Control FM Antenna Bluetooth Connectivity: Builtin Bluetooth Audio Receiver Simple Pairing for Wireless Music Streaming Works with All of Today’s Latest Bluetooth Devices (Smartphones, Tablets, Laptops, Computers, etc. ) Bluetooth Version: 4. 0Bluetooth Network Name: ‘PYLEUSA’ Wireless Range: Up to 30’+ ft. Technical Specs: Power Output: 300 Watt MAX Frequency Response: +/3dB, 100Hz20kHzImpedance: 4/8/16 Ohm. H. D. : S/N Ratio: >70dB, Mic 80dBMic Input Sensitivity: 8mVMaximum USB/SD Memory Support: Up to 32GBDigital File type Playback Support: MP3/WAV/Remote Control Battery: x CR2025 (included)Speaker Output: 416ΩPower Switch Selectable: AC/Off/DC Power Supply: 110V, 60Hz (12V DC Input)Dimensions (L x W x H): 9. 84’’ x 8. 26’’ x 2. 76’’ inches.

• 300 Watt Power: The Pyle dual channel PA Amplifier gives your entertainment or PA system a boost; Provides convenient microphone and speaker control with quick connect speaker terminals; supports speakers w/ 4 16 ohm impedance
• Bluetooth Compatible: The small professional integrated indoor public address receiver is equipped w/ Bluetooth wireless music streaming; Works w/ today’s latest devices including iphone, iPad, smartphone, computer w/ hassle free receiver pairing
• 7 Inputs: The public address amp supports MP3 digital audio file playback via USB flash port and SD memory card slot; It also features AUX 3.5 millimeter input, 2 ¼” microphone input jacks, FM radio antenna input and optional 12V DC power input terminals
• Siren Alarm Function: The compact desktop audio source system features integrated button activated siren alarm function which can be used for emergency situations and for capturing the crowd’s attention during a presentation or public announcement
• EQ Controls: This mini multi source 2 channel compact PA receiver box features front panel button control center and digital LCD Display; Has crisp buttons, independent audio channel rotary volume adjustment and also LED audio output indicator lights
• The USB input is only mean to connect to a USB ash drive (thumb drive)

User questions & answers

Question:	How many speakers can be attached? How are they connected? I have
Answer:	Hi, you may use 2 speakers up to 300 watts @4 to 8 ohms to this unit. They will be attached as a regular + and - connection at the back of the unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PFA600BU for more details. Thank you.
Question:	What is the RMS for each channel
Answer:	Hi, the RMS is 75 watts per channel. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PFA600BU for more details. Thank you.
Question:	Tengo 2 bosinas de 125 watts y 8 ohm me sirve este amplificador
Answer:	Claro yo tengo 4 bocinas grandes conectadas y un bajo y el sonido es genial.
Question:	Can i use it for a subwoofer
Answer:	Hi. Unfortunately, no. There is no subwoofer out for this unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PFA600BU for more details. Thank you!

Product features

Pyle PMXAKB2000 - 2000 Watts (1000W + 1000W at 4 Ohms) DJ Karaoke Mixer and Amplifier

The Pyle PMXAKB2000 karaoke mixer features Bluetooth wireless streaming from your device. Play your entire MP3 digital music library from your cell phone, PC or Tablet. This rugged rack mountable mixing amplifier will make your karaoke jam one to remember. Each channel features an EQ section and echo adjustment dial for applying just the right amount of EQ or effect to specific channels. Additional features include USB and SD memory card readers for MP3 digital audio file playback and LCD display. All the professional karaoke features are built in to this unit, including, a 9-step digital key control and digital echo. Connect external devices like outboard effects processors using the effects loop input.

Bluetooth Connectivity:

• Instantly Receives Wireless Music Streaming
• Works with all of Your Favorite Devices
• (iPhone Android Smartphone iPad Tablet etc.)
• Bluetooth Version: 3.0

What's in the Box:

• Rack Mount Brackets
• RCA Audio Connection Cable
• Remote Control
• Power Cable

Technical Specs:

• MAX Power Output: 2000 Watt
• 1000 + 1000 @ 4 Ohm
• 750 + 750 @ 8 Ohm
• Bluetooth Version: 2.0
• S/N Ratio: 65dB
• T.H.D.: 0.5%
• Frequency Response: 20Hz - 20kHz
• Noise Level: <10mV
• Tone Balance Control: +/-12dB