12 best marantz 5 1 receivers

Product description

Uncompromising value. This 5.1-Channel AV receiver brings the best technologies to your home including Dolby vision, 4K Ultra HD, HDR10 and Bluetooth at an affordable price. Standby Power Consumption (IR only): ≤ 0.2 W.

• 5.1 channel powerful surround sound
• Bluetooth for wireless connectivity. Rated Output Power (1kHz, 1ch driven) 100W (8 ohms, 0.9% THD); Rated Output Power (20Hz 20kHz, 2ch driven) 70W (8 ohms, 0.09% THD); Maximum Effective Output Power (1kHz, 1ch driven) (Jeita) 145W (6 ohms, 10% THD)
• HDMI 2.1 with HDCP 2.2 (4 in/1 out)
• 4K Ultra HD support, HDR10, Dolby vision, hybrid log gamma and BT.2020
• YPAO auto calibration technology for ideal sound, Exclusive Yamaha Cinema DSP technology supports playback of HD Audio (Dolby TrueHD, DTS HD Master Audio, etc.), providing natural and expansive sound imaging
• Providing complete compatibility with the latest HDMI standards, this AV receiver delivers transmission of 4K video at 60 frames/second pass through; It also supports HDR (High Dynamic Range) Video including Dolby Vision and Hybrid Log Gamma which provides incredible contrast, smooth tone and rich, bright colors

User questions & answers

Question:	Do I need to use an optical cable to set up my tv? I thought an HDMI would do, but I cannot hear any sound without use of an optical cable
Answer:	No optical cable needed. Just connect your TV Arc to the receiver arc . With that every thing else you connect in the back of your receiver HDMI port like the blue ray , Amazon Fire TV , projector ect souls come up on your TV screen with a sound . If not your receiver sound is low just increase your receiver sound higher Using the remote and the sound Should come out . For a better quality use the HDMI cable cinema plus 2.0 that has HDHomeRun 2.2 Dolby vision Dolby atmos DTS:X . You may use an optical cable if you do not have an Arc HDMI on your TV . If you have it on both TV and Receiver and Connect the 2 should work. If not your initial sounds on your sound setting is low just increase the sound using your remote
Question:	When playing music in stereo, does the unit drive the subwoofer along with the two front speakers
Answer:	There is only a pre amp output for subwoofer so you need to have a powered subwoofer. A non powered subwoofer would not be able to be connected.
Question:	Does this avr support zone 2 speaker pair? can it play a+b simultaneously
Answer:	befuddled: the v385 has no zone 2 outs yet, correy says zone cont'rl zone 2 powered!?????can i run my rs 700 off this new rcv'r--y-n??
Question:	What’s the difference between this and the 383 model
Answer:	All 5 of the channels take banana plugs as input in the 385. 3 channels are direct speaker wire in the 383

Product features

RX-V385

Uncompromising Value. This 5.1-channel AV receiver brings the best technologies to your home including Dolby Vision, 4K Ultra HD, HDR10 and Bluetooth.

4K Ultra HD HDMI Support

Providing complete compatibility with the latest HDMI standards, this AV receiver delivers transmission of 4K video at 60 frames/second pass-through. It also supports HDR (high dynamic range) Video including Dolby Vision and Hybrid Log-Gamma which provides incredible contrast, smooth tone and rich, bright colors-giving you full, high-definition enjoyment with an exceptionally realistic and natural picture quality.

Bluetooth with Music Enhancer

Thanks to its built-in Bluetooth functionality, this AV receiver lets you enjoy easy wireless music playback from smartphones and other devices. If you are looking to have a more private session, you can Bluetooth out to a pair of headphones that can connect via Bluetooth also. The Compressed Music Enhancer from Yamaha is now optimized for Bluetooth audio transmissions to ensure that your music will have vivid, dynamic sound quality during wireless playback.

Cinema DSP

Exclusive Yamaha Cinema DSP technology supports playback of HD Audio (Dolby TrueHD, DTS-HD Master Audio, etc.), providing natural and expansive sound imaging. Cinema DSP transforms the dynamics of the listening environment, with acoustic reproduction of famous venues such as the Bottom Line, Roxy Theater, and European cathedrals-letting you experience their ambience right in your room.

Easy Sound Optimization with YPAO

YPAO (Yamaha Parametric room Acoustic Optimizer) analyzes the room acoustics and your system, then precisely adjusts various audio parameters to provide the best sound for your room. By placing the supplied microphone at your listening position and switching YPAO on, the system is automatically tuned for optimum performance in your home.

Virtual Cinema Front

Even when it is impossible to install surround speakers behind the listening position, you can enjoy virtual 5-channel surround sound with all of the speakers placed in the front of the room.

Rich Bass Reproduction

This exclusive low-range enhancement technology delivers richer bass than you would expect from smaller-sized speakers while maintaining good localization and sound balance, even with compact front speakers.

AV Setup Guide

Use this special app and get expert assistance with cable connections between the AV receiver and source devices. It even guides you through various other settings such as speaker connections, TV and source device connections and power amplifier assignments.

Bi-amp Connection

The RX-V385 offers the ability to bi-amp the front speakers (L, R), which drives the treble and bass ranges with independent amplifiers. In addition to providing greater power, it also prevents interference between the high and low sounds, further improving the sound of the front speakers.

Product description

Unrivaled experiences. This 7.2-Channel AV receiver boldly explores entertainment possibilities for an advanced home theater with the latest in video and audio including Dolby Atmos, DTS: x, Wireless streaming, dual HDMI outputs and more. Audio file format: MP3/ WMA/ MPEG-4 AAC: up to 48 kHz/ 16-bit, ALAC: up to 96 kHz/ 24-bit, FLAC: up to 192 kHz/ 24-bit, WAV/ AIFF: up to 192 kHz/ 32-bit, DSD: up to 11.2 MHz. Easily Experience 9.1-channel Realism.

• Unrivaled experiences; Boldly explores entertainment possibilities for an advanced home theater with the latest in video and Audio, including Dolby Atmos, DTS: X, Wireless streaming, dual HDMI outputs and more
• Wi-Fi, Bluetooth, airplay 2, Spotify connect and music cast multi-room
• Spotify, Apple Music via airplay 2, Pandora, Sirius internet radio, Tidal, Deezer, Napster, Qobuz and more
• 4K Ultra HD, HDR10, Dolby vision, hybrid log-gamma and BT.2020 HDMI (5-in/2-out) with HDCP 2.3 and eARC
• Voice control using your Alexa device like echo or echo dot
• Music cast multi-room: Wirelessly expand your Audio to other rooms over time
• Music cast surround-capable: Add 2 music cast 20 speakers to provide wireless surround sound for a 5.1-Channel or 5.1; 2-Channel setup

User questions & answers

Question:	Does this unit come with a and b speakers? in other words. i want to put a second set of speakers outside on my patio
Answer:	You need a tv or monitor that is capable of hdmi to use the on screen setup. U can setup music without a tv using the demon AVR app
Question:	can this take a output of 1440p at 60hz from a pc and pass through to the tv
Answer:	Thanks very much for your question. The connections are preamp outputs which are intended for use with a powered sub. A passive sub will not run off this receiver. World Wide Stereo is 38 years old and a proud, authorized Denon dealer.
Question:	Can I watch tv through this unit while listening to radio or playing an album
Answer:	don’t use the headphone jack for your wireless speakers. Connecting anything to headphones Jack or aux Jack usually will remove sound from going to your hooked up speakers. If the speakers are wireless, are they Bluetooth or WiFi? See if you can use that feature on the Denon receiver to pair the wireless speakers.
Question:	Whats the difference between the v685 and the v685bl
Answer:	Hey Ike, This unit has 70 watts per channel into 8 ohms. Thanks, Denon North America

Product features

RX-V685

Yamaha RX-V685 7.2-Channel 4K Ultra HD AV Receiver with Wi-Fi, Bluetooth and MusicCast. Works with Alexa.

Wireless Surround Speakers

Combine this AV receiver with the upcoming MusicCast 50 or MusicCast 20 wireless streaming speakers and enjoy the convenience of creating a home theater with wireless rear speakers in a 5.1-channel system. What's more, you get stunningly realistic sound with a clean, clutter-free setup. Easily turn your current living room into an entertainment environment where you can fully enjoy movies, music and games.

4K Ultra HD HDMI Support

Providing complete compatibility with the latest HDMI standards, this AV receiver delivers transmission of 4K video at 60 frames/second pass-through. It also supports HDR (high dynamic range) Video including Dolby Vision and Hybrid Log-Gamma which provides incredible contrast, smooth tone and rich, bright colors—giving you full, high-definition enjoyment with an exceptionally realistic and natural picture quality.

Wi-Fi, Bluetooth and AirPlay Compatible

Built-in Wi-Fi allows for a connection with your wireless router, greatly simplifying system connections for music streaming or enjoying networked audio (PC/NAS). Bluetooth connectivity is also included to stream into your receiver or out from the receiver to another Bluetooth device such as a pair of headphones.

YPAO - R.S.C. (Reflected Sound Control) Sound Optimization

This technology analyzes room acoustics and measures various speaker characteristics, then calibrates audio parameters to achieve optimum sound. It employs Reflected Sound Control to correct early reflections for studio-quality sound. It also provides DSP Effect Normalization, which varies the Cinema DSP parameters according to the reflected sounds.

Dolby Atmos/DTS:X

Compatibility with these amazing sound technologies creates an extraordinary experience. They deliver breathtakingly rich and realistic surround sound, positioning and moving individual sounds to any virtual point in your room, including objects moving overhead. Experience the overwhelming realistic movement and immersion in videos — right in your home.

Two HDMI Outputs

Since the RX-V685 has two HDMI outputs, simultaneous connection to a TV and video projector is possible. Or you can add an additional TV in a common area like a kitchen or patio to watch the same content in two different rooms. HDMI Out 2 will carry an HDMI audio signal to the second TV to provide sound.

Zone 2

This feature, also known as Intelligent Amp Assign, allows users to enjoy stereo sound in a second room. When Zone 2 is turned on, the two surround back channels in a 7.1-channel system will be redirected to the two speakers in Zone 2, while giving the Main Zone 5.1 channels of power. Thanks to this feature, there’s no need to switch the speaker cables on the rear of the AV receiver.

Phono Input

Enjoy music from your vinyl collection through the phono input terminal.

Product description

Indulge in high-resolution sonic perfection with the Marantz NR1200 two-channel slim stereo receiver that powers detailed, high-fidelity audio from a compact chassis. Featuring a newly designed power amplifier section with high-current discrete transistors, L/R separation of power amplification circuit and a separate power transformer audio winding, revel in the most musical sound and support for high-resolution audio. The NR1200 supports the latest HDMI connectivity with its 5 inputs, each one supporting HDCP 2. 3, 4K Ultra HD 60Hz Video, HLG and more. Stream music from your favorite services via Bluetooth, Apple airplay 2 or the HEOS built-in app. Enjoy effortless voice control and total flexibility from the leading voice agents. Speak commands with Alexa, Google Assistant and Apple Siri. Ideal for custom integrations and enthusiasts alike, The NR1200 features “ihiji invision” remote System management technology and “domotz Pro” remote monitoring and management technology, letting custom integrators monitor and troubleshoot remotely when you need it, which drastically reduces downtime.

• A MODERN, SLIM STEREO RECEIVER – Indulge in high-resolution sonic perfection with the Marantz NR1200 network receiver - the consummate choice for Hi-Fi experience. It delivers superior audio quality and higher power to your choice of loudspeakers
• POWER TO SUIT YOUR AUDIO PREFERENCES – The high-current discrete power amplifier with separate L/R Power Amp circuit and power transformer. With 75W of power per channel, enjoy your high-resolution musical collection with refined Marantz sound
• FULL COMPATIBILITY WITH LATEST HDMI CONNECTIVITY – 60Hz video, 4:4:4 pure color sub-sampling, BT.2020, HDR10, HLG, ARC & 3D delivers an IMPACTFUL HOME THEATER EXPERIENCE on your 4K Ultra HD TV with EXCEPTIONAL PICTURE QUALITY & A THRILLING SURROUND SOUND
• HANDS-FREE OPERATIONS – Command your favorite voice control agent – Amazon Alexa, Google Assistant or Apple Siri - to STREAM UNLIMITED MUSIC using popular services like Spotify, TuneIn, Netflix and more via Built-in HEOS, Bluetooth, AirPlay 2 or Wi-Fi
• EASY-TO-UNDERSTAND & USER-FRIENDLY SETUP ASSISTANT comes with a GRAPHICAL ON-SCREEN DIRECTIONS that guides you through the step-by-step process and connects all your audio sources to the stereo amplifier receiver
• MULTI-ROOM AUDIO TECHNOLOGY WITH HEOS BUILT-IN – Play the same song in every room, or a different one in each room. Connect all your HEOS speakers to the app and get full control everywhere in your home!
• THE MOST MUSICAL SOUND – Extensively tuned by Marantz sound masters at the most state-of-the-art facilities to deliver an exquisite sonic signature. Envelope yourself with the most musical sound, from any source

User questions & answers

Question:	My subwoofer does not work in pure direct mode. Is this expected? I like the sound in pure direct but it is lacking some bass. Is my setup wrong
Answer:	Hello, Direct and Pure Direct modes bypass all internal processing including any bass management. For output to the sub, you would want to use Stereo mode. Thanks, Marantz North America
Question:	When used for tv/movies does the surround sound feature help solidify center focused dialog? this was always a bit of an annoyance with 2 channel
Answer:	Hello, The NR1200 does not support Dolby or DTS decoding. It only accepts analog or PCM based input signals. There's also no simulation that can be used. The best you can output is 2.1. Thanks, Marantz North America
Question:	Are there any restrictions on which formats may be sent through the receiver via Airplay
Answer:	Hello, In the receivers, AirPlay is converted to PCM at 24 bit / 48 kHz. Thanks, Marantz North America
Question:	Front l/r pre-out rca connections can be used to connect an external amp. are there any distinct advantages or disadvantages to connecting an ext amp
Answer:	Hello, There's really no disadvantage. The advantage would be if the external amp produces more power than the 1200's internal amps. This would better power your speakers. Thanks, Marantz North America

Product features

The Modern Stereo Receiver

The Marantz NR1200 stereo receiver easily rivals a sound bar for all of your home theater, delivering superior audio quality, higher power to your choice of loudspeakers and greater connectivity for audio and video sources.

Stream music from your favorite streaming services and enjoy voice control from leading agents. Modern and elegantly designed, the NR1200 is the consummate choice for Hi-Fi and television connection.

Power to Suit Your Audio Preferences

Whatever your audiophile inclinations, the Marantz NR1200 always delivers the sound you require through its powerful high-current discrete power amplifier with separate L/R power amp circuit and power transformer.

With 75W of power per channel (8-ohm, 20Hz -20KHz, 0.08% THD), enjoy your high-resolution musical collection with refined Marantz sound.

Hi-Fi Construction and Performance

Engineered with Hi-Fi parts for two-channel Hi-Fi performance, including custom designed power capacitors, sound parts exquisitely tuned by sound masters and dual DAC circuit design.

Versatile HDMI ARC Connectivity

Includes 5 HDMI inputs, each one supporting HDCP 2.3, 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub-sampling, HLG, High Dynamic Range (HDR10), 21:9 video, 3D and BT.2020 pass-through. Plus ARC (Audio Return Channel) supports the transmission of audio from your TV with a single HDMI cable, simplifying overall setup. HDMI inputs automatically rename themselves with information provided by the source.

HEOS Built-in

With HEOS Built-in technology, enjoy your favorite music in any room of your home for a wireless, whole-home audio experience. Play the same song for each connected room - the choice is yours. Enjoy music from Spotify, Pandora, Tidal and more of your local music file libraries. With additional HEOS Built-in components, like HEOS-capable speakers, play all your music in one room or many.

Amazon Music HD

High-quality warmth meets cool new tech. With Marantz and Amazon Music Ultra HD, you always get the highest resolution stream available across millions of songs.

Product description

Give your home entertainment system a cinematic upgrade. The powerful 7.2 channel receiver supports the latest three-dimensional surround sound audio formats including Dolby Atmos and DTS: x, drawing you into the middle of the action you see on screen. And with 4K Ultra HD picture quality, and Dolby Vision, that’ll transform your viewing experiences, you’ll enjoy an immersive theater-like experience in the comfort of your own home. Input Output Terminals: Audio Input Opt , Audio Input Coax , Analog Audio Input , Pre Out Subwoofer , Headphone Output , USB (for power supply only)

• Cinematic Sound at Home: Enjoy your favorite movies, TV shows and more with theater like sound in the comfort of your home
• BREATHTAKING AUDIO: Dolby Atmos and DTS: X delivers multi-dimensional and object-based surround sound
• BREATHTAKING AUDIO: Dolby Atmos and DTS:X deliver multi-dimensional and object-based surround sound
• STUNNING 4K QUALITY: 4K HDR pass through with support for Dolby Vision, HDR10, and Hybrid Log Gamma provides greater and clearer color, contrast, and brightness
• GET CONNECTED: 4 in/1 out HDMI each and 1 optical / 1 coaxial digital and analog audio connections
• AUTO CALIBRATION: Advanced D.C.A.C. analyzes and adjusts the audio for optimal sound in every room
• SMARTER CONNECTIVITY: Stream music and use Bluetooth Standby turn on the receiver from your phone

User questions & answers

Question:	How do you keep the display on the front from turning off after a few seconds? My screen stays blank unless I hit display or adjust the volume
Answer:	It’s 9 channels powered. 2 outputs for the subs If you are wiring 11 channels you will need an additional 2 channel amp or go to the 6700h
Question:	Does this allow hdr passthrough for xbox one x
Answer:	SURE CAN! I HAVE A FIRESTICK (4K) PLUGGED INTO A HDMI PORT ON THE BACK, AND IT PERFORMS PERFECTLY. I DO BOTH AMAZON AND NETFLIX FROM IT, BETTER THAN LG APPLICATION TV USES.
Question:	Tv has amazon and netflix. when i turn the receiver to tv mod and try to watch either netflix or amazon i can get the picture but no sound. thoughs
Answer:	I have not heard a 3500, and I own a 4500. According to this reference (https://www.avsforum.com/forum/90-receivers-amps-processors/2973392-official-2018-denon-s-series-x-series-avr-owner-s-thread-faq-posts-1-8-a.html) what the 4500 adds over 3500 is below. Looks like the 3500 does not have AL32 processing, which is significant imo. Also the 3500 will not get the "IMAX Enhanced" certification & modes coming to the X4500 and 6500 (no one knows if those are any good, but worth noting). --- Upgrading from the X3500H adds: 2 additional on board amps for 9CH on board processing (ie. 7.1.2 or 5.1.4; with capability to expand to 11CH processing (ie. 7.1.4) using an external 2CH amp), 11.2 main zone pre-outs, Zone 3 (same inputs as Zone 2 except not HDMI), a 2nd 12v trigger, front panel display of speaker inputs (or outputs), metal front panel with 2 line display, Custom 2 CH main zone settings (using FL/FR or dedicated Front B; LARGE/SMALL; crossover settings, sub – on/off, distance, level), two internal cooling fans, Auro 3D/Auromatic, AL32 Processing, Bass Sync; Remote Control able to store preset codes from other mfr devices (see below) and the ability to add Auro 3D Voice of God/Top Surround via the Subwoofer pre-out 2 only. Audyssey (but not Dynamic EQ, Dynamic Volume, LFC) enabled when DTS Virtual:X is selected. ---
Question:	Found a bug. when playing music and i turn on the tv, gets stuck in muting/unmuting loop until a reboot. dae see this
Answer:	Will not pass through 4k @ 120Hz or 8k @ 60Hz do to a bottleneck of the Panasonic chip used. This impacts the all the 2020 Denon AVRs and most mfg claiming HDMI 2.1 compatible. The work around us to connect your pc or console directly to your HDMI 2.1 TV and use the TVs eARC back to the AVR. Even then not all TVs pass lossless via eARC equally.

Product features

Get lost in the action with Dolby Atmos

Dolby Atmos delivers breathtaking realism with 360º surround sound by accurately positioning sound from every angle in your environment – even from above. The result is rich audio that completely envelops you.

Lifelike sound whatever the setup with DTS:X

DTS:X decoding delivers multi-dimensional surround sound that adapts to your speaker configuration in real time. Sound is positioned precisely around and above you, thanks to object-based audio decoding.

Product description

DIGMALL BTI-018 is a professional Bluetooth 5.0 audio adapter for TV, PS4, PC Xbox, compatible with aptX LL, to offer no lip-sync delay audio experience.



➤2 in 1 Bluetooth Audio Adapter

Bluetooth Transmitter: Bluetooth-enable your TV, PC, AV receiver (e.g. Yamaha, Onkyo), TV Box etc. to stream audio to any Bluetooth headphones / speakers, e.g. Bose, Beats, Sony, Plantronics, Apple AirPods headphones.

Bluetooth Receiver: Bluetooth-enable the wired speaker/ headphones, car stereo, soundbar, home theater, etc. to receive audio wirelessly from any Bluetooth audio device e.g. PC, mobile phone, Echo, Echo Dot etc.



➤No Audio Delay

Compatible with aptX LL codec to reduce the audio delay to 40ms to offer no lip-sync delay audio experience while watching TV or enjoying music. It can support LL when dual link stream. NOTE: To achieve LL, the paired devices must be compatible with aptX LL codec.



➤Dual Stream & Multi-Pointed

It can pair with 2 Bluetooth headphones/speakers to stream audio simultaneously in TX mode. Support pairing with 2 smartphones to play music from one of them at a time in RX mode.



➤Easy to Use & Auto-Reconnection

Easy to slide to “TX” or “RX” mode, make it works as transmitter or receiver by the 3.5mm Aux or RCA audio cable. It can pair with the last connected device automatically, no need to do the pairing steps every use.



➤Extended Working Time & Work While Charging

With built-in 280mAh rechargeable battery to support 14H working time. Support stream audio properly while it is charging.



➤Packing List:

1x BTI-018

1x USB Charging Cable

1x 3.5mm Cable

1x 2.5mm RCA Cable

1x User Manual



NOTE:

1, Do not support volume control and can only be adjusted via a Bluetooth headset/ audio source.

2, When using the 3.5mm Aux or RCA audio out, please be sure to use the TV Red/ White audio ports labeled "AUDIO OUT"!

• ★【 2 in 1 BLUETOOTH TRANSMITTER & RECEIVER】Bluetooth Transmitter-Connect to your TV(or other devices) by the 3.5mm or RCA Aux cable to stream audio to your Bluetooth headphones or speakers; Bluetooth Receiver-Connect to car stereo/ home theater/ wired speaker, to receive audio from your smartphone, tablet, PC, iPod and other devices by Bluetooth connection.
• ★【NO LIP-SYNC DELAY】BTI-018 audio adapter is compatible with aptX LL, enable to reduce the audio delay to 40 milliseconds for smooth audio transmission, provide no lip-sync delay audio listening experience while watching TV program or enjoying on-line gaming. NOTE: to achieve Low Latency function, the receiving devices must be compatible with aptX LL codex as well.
• ★【DUAL LINK STREAM & MULTI-POINTED】When it works as a transmitter, BTI-018 can pair with up to 2 Bluetooth speaker/headphones to stream audio simultaneously; when it works as a receiver, it can pair with up to 2 smartphones/tablets, but it can just receive audio from one device at a time. You can switch the devices conveniently.
• ★【EASY TO USE & AUTO-RECONNECTION】Easy to slide “TX” or “RX” to choose the right working mode, one-big-button simple design, making it incredibly easy to set up and use. Compatible with most of TV's on the market, Our adapter supports 3.5mm AUX and RCA Audio output without extra wires. It can automatically pair with the last connected device after powered on every time. No need to do the re-pairing steps again and again.
• ★【AMAZING SOUND & STRONGER GUARANTEE】With the newest Bluetooth 5.0 technology & advanced CSR chip, to transmit quicker and more stable pairing, offering better audio listening experience. DIGMALL provide life-time technical support and extended 24-month quality warranty to our BTI-018 Bluetooth audio adapter. Thus, please contact us firstly if there is any question or problem. We will get back to you within 24 hours.

Product features

TX MODE & RX MODE

• Bluetooth Transmitter - Bluetooth enabled TV, AV Receiver, stream audio to any Bluetooth headphones / speakers;
• Bluetooth Receiver - Bluetooth enabled wired speaker or headphone, receive audio wirelessly from any Bluetooth audio device.

SUPPORT AUX/RCA AUDIO

It compatible with almost TVs, headphones or speakers on the market. Doesn't support TV Optical output.

• 2.5mm RCA: Please Set TV speaker to "External Speaker".
• 3.5mm AUX: Please Set TV speaker to "Headset".

WHY IS AUDIO DELAY STILL NOTICEABLE ?

• Low Latency need the support of both transmitting and receiving ends.
• If the audio delay is still noticeable or the sound quality is so-so, please check whether your receiving device (Bluetooth headphone or Bluetooth music box) is compatible or not.

WORK WHILE CHARGING

• Support stream audio properly while it is charging.
• No worrying audio interrupted due to battery running out.

EXTENDED WORKING TIME

• With built-in 280mAh rechargeable battery to support 16H working time.
• Automatically Turn off When Charged or Disconnection over 5 minutes.

PACKAGE INCLUDES

• 1x iDIGMALL Bluetooth 5.0 Audio Adapter (BTI-018)
• 1x USB Charging Cable
• 1x 3.5mmaudio Cable
• 1x 2.5mm RCA Audio Cable R/L
• 1x User Manual V2.0

• UPGRADE YOUR EXISTING STEREO SYSTEM: bluMe HD is a premium Hi-Fi Bluetooth adapter that streams the highest quality audio wirelessly from your phone, tablet or computer to any home stereo system. Easy setup, connects in seconds.
• STUNNING HIGH QUALITY AUDIO: Featuring the latest Bluetooth 5.0 and support for Qulacomm aptX HD, aptX Low Latency, aptX and AAC decoding, bluMe HD adds high definition Bluetooth to any home stereo system.
• BEST-IN-CLASS SOUND: Built-in true Hi-Fi 384kHz/32-bit upsampling Audiophile Digital to Analogue Converter DAC allows bluMe HD to decode and play audio files in all their lossless glory.
• LONG RANGE BLUETOOTH: Employs special circuitry and precision-tuned antenna to extend the wireless range to up to 100+ feet, providing glitch-free performance that works through multiple walls.
• DIGITAL & ANALOG CONNECTIVITY: bluMe HD provides ultimate compatibility with your stereo equipment with Analog RCA and Digital Optical SPIDIF outputs. Also compatible with AUX inputs with included RCA to AUX cable.

User questions & answers

Question:	Why will my auris blume hd not pair with amazon alexa devices like echo dot
Answer:	You have to go through a one-time setup process using the Amazon Alexa app. Go to Devices and select the echo dot you want to connect. Then go to Device Settings and Bluetooth. It should allow you to connect a Bluetooth device to the dot.
Question:	Does the product include the usb power / rca / spidf cables
Answer:	S/PDIF (Sony/Philips Digital InterFace) is a digital audio interconnect. This device includes a TOSLINK (TOShiba LINK) fiber optic output port (to send the S/PDIF format digital audio). If your amplifier has an optical audio input port, using a TOSLINK cable (not included) would provides two channels (stereo) of high-fidelity digital audio as opposed to the single channel of analog audio the RCA connection can provide.
Question:	Can i use the digital audio out and the analog rca out simultaneously
Answer:	I've never tried but I don't see why not. I only use digital out.
Question:	I have not problem paying for a good product but want to be sure. Sell me on why 150.00 over a similar item costing
Answer:	We installed a professional sound system in a bar/restaurant. Normally I do not like Bluetooth for high fidelity since it's original purpose was phones. The customer however had specified Bluetooth that could be sent from their phones to the system. The first unit we installed was a cheaper unit, and we had interference problems with the building structure, other signal sources, and lack of distance from receiver. The sound quality was also lacking and the output voltage was low requiring additional pre-amplification.We replaced the lower cost unit with the auris True Hi-Fi unit, and it solved our interference problems, increased the range at which the signal would function, had much better clarity of sound signal and had enough output voltage to eliminate the added pre-amplifier. I would have to say I was very impressed with their product, and this would be the only unit I would consider using in another installation where Bluetooth compatibility was required.If you are using this in the home, perhaps it's a bit of overkill on the distance to sound source (phone) or need to eliminate interference, but it's audio quality is vastly superior.

Product features

bluMe HD | Premium Hi-Fi Bluetooth Music Receiver with 32-bit DAC and aptX HD

Designed to connect traditional Hi-Fi stereo systems to the world of streaming audio and Internet radio, bluMe HD instantly breathes new life into your decades-old stereo equipment.

Featuring an audiophile grade DAC, high-end audio codecs - aptX HD / aptX LL / aptX / AAC and wireless range to 100+ feet, bluMe HD is a true high fidelity premium Bluetooth Music Receiver that streams the highest quality audio wirelessly from your phone, tablet or computer to any music system or powered speakers.

Make Any Stereo System Wireless

The advent of digital music has transformed the way we listen to music today. bluMeHD has been designed to connect your aging amplifier, a long-forgotten receiver or powered speakers to the ever expanding world of streaming audio and Internet radio. The bluMe HD Hi-Fi Bluetooth Music Receiver allows you to seamlessly stream stunning wireless music from your smart device to any stereo music system, making your favorite components sounding better than the day you brought them home.

Unlimited Streaming

bluMe HD can play any audio source a Bluetooth enabled device can access, opening up a virtually unlimited universe of music to enjoy through your Hi-Fi audio system. So you’re always in control not just of the music that’s stored on your device but also access premium high-res music services like Tidal, Spotify Qobuz and Pandora, internet radio stations, podcasts and even music libraries connected to a wireless home network...all instantly, wirelessly in Hi-Fi quality.

Sounds Better Than Wired

Vast majority of us tend to hard wire our smart devices to an audio system by either using a dock that pulls analog out of the device or by hooking up to the headphone output jack. In both cases the digital signal is processed by cheap low fidelity DAC used in all smart devices. With bluMe HD the digital signal is processed by its high-end DAC and high-definition audio decoders. No wonder bluMe HD sounds better than wired hookups!

Advanced Wireless Technology

Featuring the best in class Bluetooth 5.0 technology and Qualcomm CSR8675 Bluetooth audio chip which is a premium low-power solution designed to deliver high quality wireless audio performance, bluMe HD ensures a stable and superior Bluetooth audio experience.

High Quality Bluetooth Codecs

With state-of-the-art Qualcomm aptX HD, bluMe HD can easily support 24-bit streaming directly from your phone or tablet, resulting in a ‘better-than-CD’ listening experience. Also, with support for high quality audio codecs like aptX Low Latency, aptX and AAC, bluMe HD provides an enhanced wireless listening experience for all your music via Bluetooth.

Premium Hi-Fi DAC

Equipped with the best in class true Hi-Fi 384kHz/32bit upsampling audiophile DAC - PCM5102A by TI that sports a high SNR of 112dB and is well regarded for its impressive low noise and low distortion characteristics. In short, this means that the sound you hear is crystal clear, rich and retains a wonderfully full dynamic range.

Enhanced Wireless Range

Employs special circuitry and a precision-tuned external high gain antenna ensuring consistent, strong and glitch-free performance for 30 meters (100 feet), providing much more versatility than other Bluetooth receivers.

Digital and Analog Connectivity

Connect with high-quality gold-plated RCA Analog outputs or Digital Optical (SPIDF) output for true high resolution sound through your sound system.

Premium Finish

Encased in premium anodized aluminum housing, the compact and lightweight bluMe HD is a premium product in every sense which completely blends while sitting next to even the costliest and most attractive home audio components.

TECH SPECS | Technical Specifications

Wireless Input: Bluetooth

Bluetooth Version: v5.0

Supported Codecs: aptXHD, aptX LL, aptX, AAC & SBC

Bluetooth Range: 30 meters, 100 feet

Audio

DAC: PCM5102A

PCM Support: 384kHz / 32bit

SNR: 112dB

TDH+N: -93dB

Frequency Response: 10Hz - 20kHz (+/- 0.5dB)

Connections

Outputs: Stereo Analog RCA, Digital Optical (SPDIF)

Materials

Body material: Aluminum

Colors: Black & Silver

Product description

Power truly immersive home theater experiences with the Denon AVR-S750H. Enter the action with Dolby Atmos, Dolby Atmos height virtualization technology, DTS:X and DTS Virtual:X. The AVR-S750H features an advanced HDMI section (6 inputs/1 Output) and the latest video technologies including Dolby Vision, HDR10, HOG and eARC support. Play your MP3, WAV, FLAC, ALAC and DSD (2.8/5.6MHz) files via the front-panel USB, or stream Spotify, Pandora, Tidal and more with HEOS wireless multi-room music streaming technology. Works with Apple Airplay 2, Amazon Alexa and Google Assistant for seamless voice control. Get set up in minutes with the award-winning Denon setup assistant.

• UNPRECEDENTED REALISM AND NEW FEATURES – eARC and heightened sound effects with Dolby Atmos Height Virtualization Technology. Be it the sound of a helicopter or torrential rains – it’ll sound so real, you'll think it's happening right above you
• MAKE THE MOST OF YOUR NEW 4K ULTRA HD TV with this 7.2 channel stereo receiver.Featuring HLG, HDR10,BT.2020, Wide Color Gamut & 4:4:4 Pure Color sub-sampling,it DELIVERS EXCEPTIONAL BRIGHTNESS,CONTRAST and COLOR enriching your movie and gaming experience
• Extend the reach of your music to any room in the house via wi-fi, airplay or bluetooth with heos multi-room wireless speakers - no command center or extra hardware required. Get hi-fi sound around your home with pandora, spotify, tunein, deezer & more
• Full voice control compatibility with amazon alexa lets you sit back and enjoy music without having to reach out for the remote. Adjust the volume, change the track or switch the inputs absolutely hands-free
• AWARD-WINNING ON-SCREEN SETUP ASSISTANT walks you through clear simple instructions to connect your TV, specific EQ settings & helps you optimize your surround sound. Denon's legacy & Japanese precision technology makes it a must-have for your home
• All HDMI ports (6 in, 1 out) follow the Latest revision to high-bandwidth digital content protection requirements (HDCP 2.3) & are also backward compatible with the earlier versions. Don't fret if your devices have HDCP 2.2 - they'll work perfectly well
• SMOOTH, SOOTHING, CLEAR SOUND EVERY SINGLE TIME – During setup, the Audyssey Suite – an EQ calibration system – measures & dynamically optimizes all speakers in your home theater for all listening levels. No sudden blasts or muffled dialogues anymore

User questions & answers

Question:	How do i set the avr-s750s 7th channel to bi-amp? i do not see this option in the amp assign settings as denon usa said it would be
Answer:	Hey RC, Unfortunately, S-Series units are unable to use the surround back speaker terminals in a Bi-Amp configuration. You will need an X-series unit in order to Bi-Amp your front speakers. I hope this helps if not you can always give us a call to have one of our expert technical support team members assist with this and any other concerns you may have. Thanks, Denon North America
Question:	can some audio-smart person answer this.....I was thinking of getting this denon and a pair of pioneer sp-fs52s. Works? Doesn't? Alternative speakers
Answer:	Hello, These speakers should work well. They're 6 ohm rated with a max power input of 130W. At 6 ohms, the S750H outputs 110W per channel. (2 ch driven spec) Thanks, Denon North America
Question:	Will this be compatible with an amazon fire stick
Answer:	Yes. I use an amazon fire stick with mine
Question:	During setup, all the speakers play sound, but when i play the tv, only the front left and right speakers will play the sound. how do i fix this
Answer:	You’ll have to make sure the input sound signal is surround (Like a 5.1) and not just a stereo signal (two channel). Try testing it out with a DVD or Blu-Ray, or even a streaming service that has the 5.1 like Netflix. You’ve already verified that they are all working with the test setup so the input signal is my best guess.

Product features

BIG SOUND FOR SMALL ROOMS

Enhance your TV, movie, music experience with crisp dialogue and true stereo sound quality.

AMAZING SOUND ANYWHERE

Power a second zone to enjoy music in one room while watching a movie in another.

BUILD YOUR HOME THEATER

Go deeper into your entertainment with immersive audio.

SOUND FROM EVERY ANGLE

Brilliant 360˚ immersive surround sound. Don’t just watch your movie — live it.

TRUE HOME THEATER SOUND

Upgrade your home theater experience with room-filling surround sound and elevated realism.

HEIGHT VIRTUALIZATION

Experience elevated surround sound—without dedicated overhead speakers.

DTS VIRTUAL:X

Experience immersive audio from as few as 2 channels -with virtual height and multi-channel surround

BRING THE THEATER HOME

A movie theater experience from the comfort of your home. You aren’t watching a movie, you’re in it.

3D Surround Sound

Dolby Atmos allows sound to move around you in a 3D sphere for breathtaking realism.

DISCOVER DTS:X

Experience premium home audio that completely immerses you and elevates your favorite movies.

6 HDMI INPUTS

Connect your TV, gaming system, streaming device and more. There’s room for all your favorites.

HDMI with eARC Support

Send 3D audio directly from your smart TV applications _to your AV receiver through the HDMI cable.

EXCEPTIONAL RESOLUTION

Watch movies and shows with 4K UHD video and HDR support for exceptional color, clarity and contrast

ASTONISHING COLORS

With incredible brightness, contrast and color, HDR technology transforms your TV experience.

Your eyes deserve Dolby

Dolby Vision transforms your TV experience with ultra vivid picture bringing entertainment to life

APPLE SIRI

Fill your home with music. The AVR-S750H works with Apple AirPlay 2 to control Siri hands-free.

BLUETOOTH BUILT-IN

Enjoy easy set-up with Bluetooth built-in. Stream your favorite music from your smart device

WIRELESS MUSIC STREAMING

Stream your favorite music from anywhere and everywhere around your home - HEOS Built-in technology.

AMAZON ALEXA

Control the AVR-S750H with your Alexa Device. All you have to do is ask!

GOOGLE ASSISTANT

Ask Google Assistant to turn the volume up, or to play the _next track. It’s all hands-free.

SETUP ASSISTANT

With Denon’s award-winning on-screen setup assistant, easily connect your TV to the AVR via HDMI.

YOU CAN STREAM IT ALL

Denon lets you listen to your favorite music from your favorite streaming services.

AMAZON MUSIC HD

With Denon, you can listen to Amazon Music HD with the Hi-Res quality you want to enjoy.

AUDYSSEY OPTIMIZATION

Audyssey offers accurate set-up and sound quality from each individual speaker available.

• [EXCELLENT SOUND QUALITY] Qualcomm aptX HD Audio ensures compatible Bluetooth devices deliver high definition (HD) Audio. It preserves sound data throughout the Audio transmission, resulting in a ‘better-than-cd’ listening experience. Simple switch to alternate between HD and low latency priority If your device supports both codecs.
• [DUAL-LINK NO LIP SYNC DELAY] Simultaneously stream audio to 2 headphones or speakers with no delay while watching TV, movies or gaming. Note: 1. Not recommended to use dual link with TWS earbuds. 2. To achieve low latency (<40ms delay ) receiving device (headphones / speaker) must also support aptx Low Latency or you may experience a 70-220ms delay. You can check your device compatibility on the aptX official website.
• [PASS-THROUGH SUPPORT] Even if your TV only has one Optical port, connect the Oasis Plus between your TV and Soundbar - then play audio from your soundbar and stream to your headphones simultaneously. This is a unique product Feature! It even supports independent device volume control. Easily choose between Bluetooth mode (wireless) and bypass mode (wired) with the Flip of a switch, without the need to plug / unplug any wires.
• [EXTENDED LONG RANGE] Experience Wireless freedom to walk anywhere in the house! Proven range of 295ft in testing with headphones (audition Pro), and 328ft using two Oasis Plus units as a Transmitter/ receiver Pair in open air line-of-sight conditions. Note that the operating range can be affected by multiple factors (see Faq1 below)
• [EASY TO USE] It supports full-featured voice guidance and status / codec indicators, making it incredibly easy to set up and use. Re-connects quickly to the last device. Supports Digital optical / AUX / RCA Audio output standards making it compatible with 99% of the TVs on the market. On board volume adjust function can be used for many devices that do not have their own volume controls (E. G. Airpods). Any questions, please contact Avantree Technical Support.

Product description

The 5.2 channel AVR-S540BT features Dolby Vision, HDR, HLG and 4K video upscaling for a stunning home theater experience. It includes 5 HDMI inputs at 4K/60 Hz with full-rate pass-through and HDCP 2.2 support on all HDMI ports. Use the front panel USB port to listen to your favorite tracks seamlessly, or stream music via Bluetooth or HEOS with your smart devices via any of the popular streaming services like Spotify, TIDAL, Pandora and more. Control power, volume and source with the Denon 500 Series Remote app. With our award-winning Denon Setup Assistant, the AVR-S540BT is just as easy to setup as it is to enjoy.

• Make the most of your new 4k ultra HD TV. This stereo receiver delivers exceptional brightness, contrast and color leveraging industry leading HLG (hybrid Log-Gamma), HDR (High Dynamic Range), BT.2020, Wide Color Gamut and 4:4:4 Pure Color sub-sampling to impress even the most discerning viewers. Experience 5 AMPLIFIERS (140W per channel) driving amazing power, realistic display and immersive sound across any room
• Your favorite music at your fingertips - With a built-in Bluetooth, amp up your music from eight different devices, be it a computer or any other Smart device and transmit it to a wide range of speaker systems. Create an integrated audio system in conjunction with denon heos link for a thrilling multi-room experience, which also allows you to play back music from almost every digital streaming service like Spotify, TIDAL, Pandora and many more
• Our easy on-screen setup assistant walks you through clear simple instructions to connect your TV, specific EQ settings and helps you optimize your surround sound
• Four quick select buttons on the front panel help you store your preferred audio settings for television, Blu-Ray, and more, and allows you to switch between them quickly
• With its 100-year legacy and Japanese precision technology, Denon AV Receiver S540BT delivers multi-dimensional surround sound with 5.2 channel compatibility and Supports 4k ultra hd picture quality, perfect for your home theater and entertainment system
• You can also connect the Denon AVR with your Smart TV remote and Access all your speaker sources and surround mode selections using just one remote. Or simply Use your smartphone as a remote. Download the Denon 500 Series Remote app for iOS and Android and control the receiver through your phone. Convenient, isn't it.

User questions & answers

Question:	Do you need a tv to set up pandora or a wireless connection
Answer:	I was wondering too! The one I am replacing was bought from Amazon Jan. 2015. It stated Poland on the Glass, but nothing on the plastic. Now they all seem to state Portugal on the glass portion. I like the BODUM embossed plastic frame, but it is an older model with the flat top and D handle. Even Bodum does updates.
Question:	Are the hook up's for subwoofer is that for a powered sub woofer speaker or a passive
Answer:	Beaker is glass. The handle and the part that the beaker fits into is plastic.
Question:	I plug in an antenna that goes to my outside wireless speakers in the headphone jack, on some receivers this turns off my inside connected speakers
Answer:	I had the other Brazil version. I was able to remove the beaker. VERY CAREFUL, it is in there tight. SOAP and warm water, you should get some movement from it. I wouldn't recommend removing the beaker unless you really have to clean it. If you don't feel comfortable removing the beaker, then I wouldn't.
Question:	How many watts per channel for 8ohm speakers if only using front two , center speaker with sub woofer and no surround sound
Answer:	It is sad, isn't it, that some misguided bean counter at Bodun decided to earn a bonus by replacing a sturdy, metal piece (like my 30 year old Bodun has) with that ridiculous piece of plastic; saving, what? Two cents worth? Well, that was mine. I will take another commenter's advice and be gentle. It is informative that the elaborate pictures in the description do not show this particular piece; apparently they know.

Product features

BIG SOUND FOR SMALL ROOMS

Enhance your TV, movie, music experience with crisp dialogue and true stereo sound quality.

BUILD YOUR HOME THEATER

Go deeper into your entertainment with immersive audio.

TRUE HOME THEATER SOUND

Upgrade your home theater experience with room-filling surround sound and elevated realism.

SOUND THAT FILLS THE ROOM

Bring the theater home with crisp dialogue and stereo-quality sound for all your entertainment.

LOSSLESS SURROUND SOUND

Experience the clarity and impact of lossless multi-channel audio that truly surrounds you.

BRING THE THEATER HOME

A movie theater experience from the comfort of your home. You aren’t watching a movie, you’re in it.

ELEVATED HOME THEATER

Enjoy a cinematic sound experience for movies, music, and TV shows with Dolby TrueHD powerful audio.

5 HDMI INPUTS

Connect your TV, gaming system, streaming device and more. There’s room for all your favorites.

EXCEPTIONAL RESOLUTION

Watch movies and shows with 4K UHD video and HDR support for exceptional color, clarity and contrast

ASTONISHING COLORS

With incredible brightness, contrast and color, HDR technology transforms your TV experience.

YOUR EYES DESERVE DOLBY

Dolby Vision transforms your TV experience with ultra vivid picture bringing entertainment to life.

SETUP ASSISTANT

Denon’s award-winning on-screen setup assistant, easily connect your TV to the AVR-S540BT via HDMI.

BLUETOOTH BUILT-IN

Enjoy easy set-up with Bluetooth built-in. Stream your favorite music from your smart device.

YOU CAN STREAM IT ALL

Denon lets you listen to your favorite streaming services on your smart devices via Bluetooth.

ROOM CALIBRATION

Finish setup with dynamic precision that perfectly calibrates audio settings to suit your room.

Product description

Enjoy a superior and powerful listening experience for your movies and music with precision audio engineering and tuning. The Marantz SR7013 features Dolby Atmos, DTS:X, Auro-3D and DTS Virtual:X decoding for immersive home theater, and proprietary HDAM circuit boards for more detailed, dynamic sound. Eight HDMI inputs are fully compatible with the latest specifications, including 4K Ultra High Definition video, 60Hz video, HDR, Dolby Vision and Hybrid Log-Gamma. Listen to all your favorite music from your smart devices via Bluetooth, AirPlay 2 or the HEOS app. Control the SR7013 with your voice and Amazon Alexa — download the HEOS Home Entertainment skill and ask Alexa to play, pause or stop music, switch inputs for your different media players, turn up the volume and more.

• MAKE THE MOST OF YOUR ULTRA HD TV INVESTMENT - Drive EXCEPTIONAL VISUAL CLARITY with full-rate pass-through, SD/HD video upscaling to Ultra HD, 4:4:4 Pure Color, HDR10, BT.2020, 3D, 21:9 video, Dolby Vision, HLG and eARC - transmit 3D audio in one HDMI
• CREATE THE ULTIMATE CINEMATIC AUDIO EXPERIENCE with 125W per channel - Choose from a standard 9.2 or 7.1.2 home theater system, a 5.1.4 3D system with Dolby Atmos elevation speakers, or extend to 3 rooms with 5.1 (zone 1), 2.1 (zone 2 & zone 3)
• CHOOSE YOUR FAVORITE VOICE CONTROL AGENT - Amazon Alexa, Google Assistant, Apple Siri or Josh.ai Smart Home - to play, pause and stop music, switch inputs and more while you STREAM UNLIMITED MUSIC OR VIDEOS via Bluetooth, AirPlay 2, or the HEOS app
• Marantz receivers SEAMLESSLY INTEGRATE WITH SMART HOME AUTOMATION SYSTEMS like Josh.ai or Control4, and allow REMOTE MONITORING OF CONNECTED DEVICES, while you are vacationing or are on the move
• Continuing its tradition of DELIVERING EXCEPTIONAL STEREO LISTENING, Marantz hand-picks and custom-designs its high-grade components and their EXCLUSIVE HDAM technology gives you the best home theater experience ever imagined

User questions & answers

Question:	General question: do all av receivers have built-in dac chip? if they do, will adding a separate dac component make any difference
Answer:	Thanks for your question. A digital source (like a DAC) should be connected to a digital optical or digital coax digital input. That input should be "assigned" to one of the aux inputs as detailed in the Marantz owners manual. Many AV receivers have built in DACs, necessary for the receiver to process audio from digital video inputs like HDMI. World Wide Stereo is 40 years old and a proud authorized Marantz dealer.
Question:	Can speaker height outputs be used as elevation height fronts, which i can do (or should be height rear which i can't do
Answer:	Thanks for your question. Marantz SR7013 owners manual details the necessary configuration for using both height front and height rear speakers. It will require use of an additional 2 channel amplifier (as detailed on page 62). World Wide Stereo is 41 years old and a proud authorized Marantz dealer.
Question:	How many channels of amplification? How many watts per channel? This probably should be stated some place
Answer:	125w +125w 8 Ohms
Question:	How come i cant purchase a protection plan
Answer:	It comes with five year

Product description

Enjoy exceptional sound in a minimalist style with the Denon RCD-N10 network CD receiver, equipped with a high-output Class D amplifier that eliminates external noise and provides a Hi-Fi listening experience from a variety of digital sources. Connect this unit to your TV via the optical digital input to boost the sound in your movies, TV shows, games and more. Listen to high-resolution audio playback on the built-in CD player or the AM/FM tuner with 50 station auto-preset memory tuning. With the Denon RCD-N10 enjoy your favorite audio content wirelessly from your smart devices via Bluetooth, Wi-Fi or AirPlay 2, or via the front panel USB port for connecting memory drives. Build a wireless, multi-room sound system with the unit’s built-in HEOS technology that lets you explore, browse, play music from your own music library or stream music services like Spotify, Deezer, Tidal, Amazon Music anywhere in your home.

• A BLEND OF SOPHISTICATION & OPTIMUM PERFORMANCE IN A SMALL FOOTPRINT - From the award-winning CEOL series, this Network CD Receiver has a minimalistic design in matte-finish & comes with both Analogue & Digital inputs
• CONNECT A WHOLE-HOME WIRELESS AUDIO SYSTEM including your TV, other media devices or gaming console to the receiver and redefine your movie, music, sports and gaming experience
• HEOS MUSIC STREAMING WITH AMAZON ALEXA COMPATABILITY - Enjoy the benefits of multi-room HEOS wireless streaming with voice commands & use popular services like Spotify, Internet Radio, Tidal, TuneIn, Pandora and more via Bluetooth or Airplay 2
• CHOOSE HIGH QUALITY AUDIO WITH THE BUILT-IN CD PLAYER - In addition to the basic functions of Play/ Pause/Stop, Repeat/Random, Forward/Rewind, this receiver cum CD player allows direct song access and program playback (up to 25 tracks)
• A COMPACT & VERSATILE SOLUTION - Easy setup, additional connections with USB, subwoofer output, built-in Wi-Fi, AM/FM Tuner, Headphone jack, and simple controls. Perfect for smaller footprint rooms, apartments and condos
• With its 100-year legacy & Japanese precision technology, Denon BRINGS PURITY OF SOUND AND JOY TO YOUR LIVES. Immerse yourself in multi-dimensional audio and Hi-Fi surround sound with this receiver for an unmatched home entertainment system

User questions & answers

Question:	Does this support both 120 and 240v
Answer:	Hello, All products designed for North America support 120V only. Thanks, Denon North America
Question:	Does the denon rcd-n10 have a sleep timer for goint to sleep to music
Answer:	Hey Amazon Customer, No, it does not have a sleep timer. Thanks, Denon North America
Question:	Q acoustics 3020i good pair of speakers for the rcd-n
Answer:	Hey Riddick, Yes, these speakers will work with your RCD-N10. Thanks, Denon North America
Question:	it can connect with turntable
Answer:	Yes if your turntable has a built in preamp you can use the analog input.

Product features

Denon RCD-N10 Hi-Fi All-in-One Receiver & Cd Player | Perfect for Smaller Rooms and Houses | Wireless Music Streaming & Amazon Alexa Compatibility | Bluetooth

Description:

With the Denon CEOL-N10 your sound possibilities are nearly endless. Listen to your favourite CD, stream your playlists via Spotify, Deezer Premium or Tidal, go multi-room with the built in HEOS technology, using Bluetooth or your network. Enjoy Internet Radio and AirPlay2. And the most convenient thing: Control this Mini HiFi system easily via your voice with Amazon Alexa voice compatibility. It's a thousand things. It's cool, it's CEOL. Now available with Google Assistant.

Exceptional Sound Design:

CEOL-N10 is built for optimum sound performance with a completely re-engineered two-way speaker configuration that improves clarity and musical accuracy. You will hear every instrument clearly with enthusiast quality.

Elegant Minimalism:

The CEOL-N10 comes in a compact design that complements your style. The beautiful Denon mini system is available in a black, white and grey high-quality matte finish. The sophisticated industrial design of the CEOL-N10 blends seamlessly into your home and pairs with your aesthetic preferences.

Product description

The elegant design of r-n803 is equally matched with powerful brainy internals - a full suite of modern technological and connectivity Features make the receiver even more captivating and result in a receiver worthy to take home to your Wi-Fi and Hi-Fi.

• Works with Alexa for voice control (Alexa device sold separately)
• Beautiful and elegant front aluminum Face with two channels of 145 W high power output (0.019 percent THD)
• Phono input terminals for Turntables and optical/coaxial Audio inputs for TV. Signal to Noise Ratio (CD) : 100 dB (Pure Direct on, 200 mV)
• Wireless direct, Bluetooth, airplay, and Wi Fi to access to your music library, Pandora, Spotify, SiriusXM internet radio, Tidal and Deezer
• YPAO Yamaha acoustic Optimizer with precision EQ, volume, and reflected sound control.Standby Power Consumption:0.1 W (Network standby on / Wi Fi connection; 1.8 W)
• Pure direct and top art design to faithfully Preserve the integrity of your music

User questions & answers

Question:	Is the front faceplate solid aluminum or plastic with an aluminum covering
Answer:	Yes, there is an indicator light under the button, it will light up when charging, and the charging port will also light up
Question:	Will it find 3rd party bluetooth powered subwoofer
Answer:	It is very suitable, 30W is enough for party use
Question:	Will this product work with 4 ohm speakers
Answer:	Very portable and easy to carry
Question:	Could you connect a graphics equalizer using the line in and out
Answer:	Yes, I can use other adapters

Product features

High Musicality

The R-N803 has a modern suite of technological and connectivity features. Legendary Yamaha Hi-Fi reproduces the subtle ambiance of concert halls and delicate expressive nuances in sound. Wi-Fi connectivity expands your music into streaming and more.

Voice Control

Easily control your MusicCast products with Amazon Echo and Google Assistant devices.