14 best jbl mixer bands

Product description

XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. Built in USB allows you to play songs from your computer or a thumb drive. Built in recording - allows you to record your main mix onto the USB or SD card. USB supported formats are MP3, WAV, WMA. Built in advanced bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LEDs. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones. Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LEDs lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R. Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.. When the pad button is pressed in the gain will adjust from 240dB to 0dB. Solo button allows you to hear the signals

• Package Includes: JBL Pro JRX212 12" 1000 Watt Professional Passive PA/DJ Speaker 8 Ohm JRX 212. Rockville RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres. Pair of Rockville Tripod Speaker/Lighting Stands+ 20 Foot 1/4"-SpeakOn Cables. Features: JBL Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
• Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance.. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications:
• Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz. Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in). Weight : 19.5 kg (43 lb)
• High Frequency Driver : JBL 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBL M112-8. Input Connectors : Neutrik Speakon NL-4 (x1); .25 in. TS phone jack (x1); parallel. Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket. Features: Rockville RPM1470 14-Channel 6000 Watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power
• RMS Power Output:750 Watts x 2 @ 4 Ohm500 Watts x 2 @ 8 Ohm. 750 Watts x 2 @ 4 Ohm. 500 Watts x 2 @ 8 Ohm. Program Power Output:1500 Watts x 2 @ 4 Ohm1000 Watts x 2 @ 8 Ohm. 1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output:3000 Watts x 2 @ 4 Ohm2000 Watts x 2 @ 8 Ohm. 3000 Watts x 2 @ 4 Ohm. 2000 Watts x 2 @ 8 Ohm. 14 Channel mixer section: 12 mono channels, 1 stereo channel. 14 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones

Product description

8 high-quality mic preamps with switchable +48 V phantom power for condenser microphones. 3-Band EQ (high, mid, low) per channel. Pad Switch on each Mono Channel. Clip LEDs on each Mono Channel. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs. Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode. Monitor Level Knob with 5 LED Level Meter. Main Level Knob with 2 x 5 LED Level Meter. Dual 1/4 Stereo and Dual RCA Aux Input with Independent Level Knob for External Signal Sources. Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption. 1/4 Foot-switch Input connector. Dual RCA REC Out. Dual Speak-ON jacks for Monitor Output. Dual Fan vent Cooling System. 110-120V power supply. Dimensions: 18 x 11.22 x 11.41. Weight: 30.9Lbs.

• Package Includes: JBL JRX225 Dual 15" Professional 4000 Watt Passive DJ/PA Speakers 4 Ohm JRX 225. Rockville RPM109 12 Channel 4800w Powered Mixer, 7 Band EQ, Effects, USB, 48V. Features of JRX225: JBL JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling.. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design
• High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance.. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W
• Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz. Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb)
• High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBL M115-8A x 2. Input Connectors : Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel. Grille : 18-gauge, powder-coated steel. Features: Rockville RPM109 12 Channel 4800w Powered Mixer, 7 Band EQ, Effects, USB, 48V. RMS Power Output: .....600w x 2 @ 4 Ohm .....450w x 2 @ 8 Ohm .....1200w x 1 @ 8 Ohm
• Program Power Output: .....1200w x 2 @ 4 Ohm .....900w x 2 @ 8 Ohm .....2400w x 1 @ 8 Ohm. Peak Power Output: .....2400w x 2 @ 4 Ohm .....1800w x 2 @ 8 Ohm .....4800w x 1 @ 8 Ohm. 12 Channel mixer section: 6 mono channels, 3 stereo channels. 1 dedicated USB/SD input. Built-in Bluetooth playback. Studio-grade stereo FX processor with 16 presets including reverb, chorus, plate, delay, chorus, cathedral and various multi-effects

Product description

XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. 1 dedicated USB input to play back music or record the main mix. USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LEDs. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones. Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LEDs lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R. Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.. When the pad button is pressed in the gain will adjust from 240dB to 0dB. Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this

• Package Includes: JBL Pro JRX212 12" 2000 Watt Professional Passive PA/DJ Speakers 8 Ohm JRX 212. Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects, 8 XDR2 Mic Pres. Pair of Rockville Tripod Speaker/Lighting Stands+ 20 Foot 1/4"-SpeakOn Cables. Features of JRX212: JBL Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance.. Non-resonant, all-steel handles
• 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz. Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz
• Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in). Weight : 19.5 kg (43 lb). High Frequency Driver : JBL 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBL M112-8. Input Connectors : Neutrik Speakon NL-4 (x1); .25 in. TS phone jack (x1); parallel. Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket. Features:
• Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. RMS Power Output: .....750w x 2 @ 4 Ohm .....500w x 2 @ 8 Ohm. Program Power Output: .....1500w x 2 @ 4 Ohm .....1000w x 2 @ 8 Ohm. Peak Power Output: .....3000w x 2 @ 4 Ohm .....2000w x 2 @ 8 Ohm. 8 Channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones

User questions & answers

Product description

Peak Power Output: .....1200w x 2 @ 4 Ohm .....900w x 2 @ 8 Ohm. Individual Volume, Reverb, Bass, and Treble controls. Adjustable effects: volume, echo, and delay. Built in bluetooth playback. USB Input. SD Input. MP3 Volume control. AUX volume control. Master volume control. Illuminated 5 band graphic equalizer. 5 segment LED power out display. 8 balanced XLR inputs. 8 1/4 TRS inputs. 1 RCA L/R AUX input. 1 RCA L/R Rec output. 1 1/4 Line output to connect a powered subwoofer, more powered speakers, or an additional amplifier. Dual 1/4 unbalanced speaker outputs (accepts 4 ohm or 8 ohm speakers). +15V phantom power. Fan Vent Cooling System. Dimensions: 19 x 12 x 7.5. Weight: 25.4Lbs.. : Tripod Speaker Stands. Features: Adjustable Height. Steel Construction. Black Color. Weight Capacity: 132 lbs. Adjustable Height Range: 47-79 inches. Base spread: 0-23 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches All Rockville pro audio cables are made with 100% copper which boosts theefficiency of the cable. There is nothing better than 100% copper. Most of thecheaper cables on the market do not use 100% copper, instead they make theircables with CCA (Copper Clad Aluminum). CCA cables do not perform on the levelthat 100% copper cables perform at. CCA will not conduct signals efficiently. A12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure coppercable, which will in turn, affect the performance and longevity of yourequipment. If you find cables on the market that do not mention the coppercontent, there is a good chance that they are selling you a cheaper cable thatis CCA and not 100% copper. Rockville pays an inspection company to oversee themanufacturing of the product to ensure that we provide a 100% Oxygen Free CopperCable (OFC). Our OFC cables are less prone to oxidation, and will providemaximum signal transfer.

• Package Includes: JBL Pro JRX215 15" 2000 Watt Professional Passive PA/DJ Speakers 8 Ohm JRX 215. Rockville RCTS1425 25' 14 AWG 1/4" TS to Speakon Speaker Cable 100% Copper. Rockville RPM85 2400w Powered 8 Channel Mixer, USB, 5 Band EQ, Effects/Bluetooth. Pair of Rockville Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2. Features of JRX215: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System
• JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50
• Crossover Frequency : 2.2 kHzDimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in). Weight : 27.4 kg (60.5 lb). High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBL M115-8A. Input Connectors : Parallel Neutrik Speakon NL-4 (x1); .25in TS phone jack (x1). Grille : 18-gauge, powder-coated steel. Mounting & Suspension : 36 mm, dual-angle pole-mount socket. Features:
• Rockville RCTS14-25 14 AWG 1/4" TS to SpeakOn Pro Speaker Cable. 100% Copper Conductors for Lower Resistance. Black PVC Jacket for Both Durability and Flexibility. Intended for High-Current Applications Only, Not Line-Level Signals. Length: 25 Ft. Gauge: 14. Features: Rockville RPM85 2400w Powered 8 Channel Mixer, USB, 5 Band EQ, Effects/Bluetooth. RMS Power Output: .....300w x 2 @ 4 Ohm .....225w x 2 @ 8 Ohm. Program Power Output: .....600w x 2 @ 4 Ohm .....450w x 2 @ 8 Ohm

Product description

Get that world-renowned JBL Professional sound anytime, anywhere with the new JBL EON ONE PRO - The first portable, battery-powered, linear-array PA system in its class. With a lighter, more compact design and up to 6 hours of playtime provided by a rechargeable lithium-ion battery, you can now take your performances to places you've only dreamed of. Bring the band along and get pristine audio quality through its 7-channel analog mixer with integrated effects. Capture the moment or add lighting effects with the built-in accessory mount for a camera or lighting element. And keep the crowd engaged between sets by streaming Bluetooth audio from your mobile device. AC input : 100 – 120 VAC, 50/60Hz; 220 – 240 VAC, 50/60Hz

• Your purchase includes One JBL Professional EON ONE Pro 7-Channel base | Height spacers (x2), Column speaker array (x1), Power cable & quick-start guide
• Speaker dimensions – 15.8” D x 10.5” W x 23.4” H | Weight – 37.5 lbs. | Voltage – 100V-120V / 220V-240V, selectable 50/60Hz | Max SPL – 118 dB (peak) | Bass – 8” LF bass unit | Driver – 6” x 2” HF drivers
• 7-Channel input/output: Hi-Z (x2), combo ¼”/ XLR (x4), RCA jacks (x2), 3.5mm jack (x1), or wireless Bluetooth connection
• Wireless Bluetooth streaming for break music or backing tracks, and a built-in stand and USB charging port for mobile devices
• 6 hours of battery playtime with high-capacity lithium-ion rechargeable battery. Amplifier Design - Class D

User questions & answers

Product features

JBL EON ONE Pro All-in-One, Battery-Powered, 7 Channel, Portable Linear-Array PA System

Get that world-renowned JBL Professional sound, anytime, anywhere with the new JBL EON ONE PRO, the first, portable, battery-powered, linear-array PA system in its class. With a lighter, more compact design and up to six hours of play time provided by a rechargeable lithium-ion battery, you can now take your performances to places you’ve only dreamed of. Bring the band along and get pristine audio quality through its seven-channel analog mixer with integrated effects. And keep the crowd engaged between sets by streaming Bluetooth audio from your mobile device.

Take Your Performance to New Places

The EON ONE PRO empowers you to give your fans incredible live experiences, wherever your inspiration takes you—on a mountain or the beach, subway or streetside—even when you can’t plug in. Music transcends boundaries, why shouldn’t your PA? That’s why we created the first-in-class battery-powered linear-array PA system, so you get amazing sound everywhere you go. The rechargeable lithium-ion battery provides up to six hours of play time, so you can give back-to-back performances without an outlet. Leave the generator at home.

Sound Coverage Across All Angles

Leveraging JBL’s patented, pioneering research and development around linear array design, the EON ONE PRO optimizes sound dispersion so your audience can hear your performance from all angles—even from behind. Similar to the technology used in large venue speaker arrays, the JBL EON ONE PRO optimizes the spacing of each driver to ensure amazing sound quality and consistent directionality, allowing your crowd to hear every note, from every angle, just as you intended it. EON ONE PRO even recalibrates its sound depending on the number of high-frequency height spacers you choose when setting up.

The Connections You Need to Get a Perfect Mix

EON ONE PRO’s streamlined 7-channel mixer has the inputs, effects, and features you need for the perfect mix. Get optimal sound from electric guitars and other instruments by plugging into its two Hi-Z inputs, and take advantage of the warmth of professional condenser microphones with +48v phantom power. With four combo ¼” / XLR inputs, a 3.5mm jack, and an RCA input, you can connect virtually anything you desire. Bass, treble and reverb controls allow you to fine tune your tone. And for an even bigger sound, connect a second EON ONE PRO to the pass-thru input.

One-Hand, Easy-to-Carry Design

With EON ONE PRO’s easy-to-carry, lightweight and versatile design, you only need one hand and one trip from the car. The linear-array speaker system fully collapses into the base, no shoulder bags or multiple trips required. An ergonomic handle design and light weight of just 35 pounds (16 kg) means EON ONE PRO rests perfectly parallel to your body during transport—making it easy to take it with you to even the most remote locations.

Stream Bluetooth Audio Whenever You Need It

No wires, no problems. With EON ONE PRO, keeping your crowd engaged when the bands on break is easier than ever. Stream music from any Bluetooth-enabled device to keep the party going, or even use this for backing tracks. And, with a built-in USB port, you won’t need to worry about keeping your device charged—just plug it in. There’s even a built-in tablet stand so your device is always in reach.

Bass You Can Feel

Even without power, you can still sound powerful. The EON ONE PRO houses an 8” subwoofer that delivers low-end response that your audience can really feel. Bass-reflex technology further increases the impact of your bass tones, providing the well-defined low-frequency response that you would expect from a full-size speaker system.

Capture Your Performance or Set the Vibe

You spend so much time working to get that perfect sound and performance, it deserves to be captured. The EON ONE PRO features an accessory mount located at the top of the line-array speakers—simply attach a camera and you’re ready to record. You can also add a lighting element to set the perfect vibe.

Proven Legendary JBL Professional Sound

The EON ONE PRO enables your audience to experience the same legendary JBL sound heard in some of the largest stadiums and used by top artists. With 70 years of professional audio experience, the EON ONE PRO provides superior sound quality so you can sound great no matter where you play.

Product description

Crossover Type: 2-way passive network, 2nd order filters (12dB cutoff per octave). Enclosure: Polypropylene. Suspension/Mounting: 36 mm pole socket. Handles: One on top. Speaker Grille: Powder-coated perforated steel. Product Dimensions (H x W x D): 22.6 x 30.5 x 15.7 inches. Product Weight: 38.8 Lbs.. Channels: 1-4: XLR/1/4 Jack Combo Connectors. 5-6: One pair of 1/4 balanced TRS jacks (stereo), and one pair of RCA jacks (stereo). 7-8: One pair of 1/4 balanced TRS jacks (stereo), and a 3.5mm stereo jack. Phantom Power: CH1 and CH2 have phantom power control and share the same selection switch. Hi-Z Selection CH3 has a Hi-Z selection switch used for guitar signal input. Features: Adjustable Height. Steel Construction. Black Color. Weight capacity: 100 LBS. Adjustable Height Range: 47.25-78.75 inches. Base spread: 15-40 inches. Tube Diameter: 1.5 - 1.37 inch. Leg Diameter: 1.37 inch. Includes 20 Foot XLR Female to XLR Male Cables. Includes Travel Bag. Includes: DJ1500 headphones. Detachable cable. Soft suede and leather ear cushions (interchangeable). Leather hard travel protective case. Gold plated adapter. Features: Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Professional DJ Headphones. 40mm Neodymium drivers. Ergonomically designed large over-the-ear swivel cups. Supreme sound isolation. Accurate sound reproduction. Minimal bleed. Sturdy and durable steel headband and arms. Soft leather headband cover. Interchangeable leather and soft suede ear cups covers included. Detachable 47 coil cable made of 100% Oxygen Free Copper (158 fully extended). Gold plated 3.5mm connector. Gold plated adapter. Hard leather carrying case. Specifications: Style: Closed-Back. Design: Circumaural. Transducer Type: Dynamic. Driver: 40MM. Sensitivity: 1003dB. Impedance: 32ohm. Frequency Response:8Hz 22KHz. Max. Power: 800MW. Rating Power: 400MW. Net Weight:290g (with cable)?. Features: Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female

• Package Includes: JBL EON208P Portable PA System / Pair 8" Speakers+Powered 8 Chan Mixer/Bluetooth. Pair of Rockville Adjustable Tripod Speaker/Light Stands+ 20 Foot XLR Cables. Rockville RWM1203VH VHF Wireless Dual HandHeld Microphone System/Digital Display. Rockville DJ1500 DJ Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Rockville RockPAR50 LED RGB Compact Par Can DJ/Club DMX Wash Lights. What's In The Box: JBL Professional Speakers
• AKG Vocal Microphone, 1 Microphone Cable and 1 Microphone Clamp. Pair of Unshielded Speaker Cables. Power Cable. Owner's Manual. Features: JBL EON208P Portable PA System with Pair 8" Speakers and Powered 8-Chanel Mixer with Bluetooth. System Type: Portable 2-Way Full-Range Loudspeakers With Powered Mixer. Power Rating: 300 Watts (2 x 150 Watts). Maximum SPL Output: 121 dB peak. Frequency Range (-10 dB): 60 Hz - 20 kHz. Frequency Response (+/-3 dB): 70 Hz - 18 kHz
• AC Input 100-120 V, 220-240 V 50/60 Hz. Amp Design: Class D. Output Connector: 2 x 1/4" TS (unbalanced) Amplifier Outputs. Channels: 1-4: XLR/1/4" Jack Combo Connectors 5-6: One pair of 1/4" balanced TRS jacks (stereo), and one pair of RCA jacks (stereo) 7-8: One pair of 1/4" balanced TRS jacks (stereo), and a 3.5mm stereo jack. 1-4: XLR/1/4" Jack Combo Connectors. 5-6: One pair of 1/4" balanced TRS jacks (stereo), and one pair of RCA jacks (stereo)
• 7-8: One pair of 1/4" balanced TRS jacks (stereo), and a 3.5mm stereo jack. Phantom Power: CH1 and CH2 have phantom power control and share the same selection switch Hi-Z Selection CH3 has a Hi-Z selection switch used for guitar signal input. CH1 and CH2 have phantom power control and share the same selection switch. Hi-Z Selection CH3 has a Hi-Z selection switch used for guitar signal input
• Mixer Output Connectors: Monitor Out: one pair of RCA jacks (stereo), and one pair of 1/4" balanced TRS jacks (stereo). Headphone Out: 3.5mm stereo jack. Subwoofer Out: 1/4" balanced TRS jack. Treble/Bass EQ: Per-channel high- and low-shelf filters; +/- 12dB cut and boost. System Limiter: On-board DSP limiting. LF Driver: 1x JBL 8" (203mm) woofer. HF Driver: 1x 1" Neodymuim black aluminum dome tweeter. Coverage Pattern: 100 horizontal x 60 vertical. Crossover Frequency: 2 kHz

User questions & answers

Product description

More than just another great JBL sound system, the new EON600 is a true step forward in technology developed specifically to deliver the best sound possible regardless of its application. Completely rethinking how truly good an affordable self-contained, portable PA system can be, JBL engineers purposely designed and built the EON600 from the ground up featuring JBL’s advanced waveguide technology, JBL designed and manufactured transducers, and convenient, wireless remote control of its onboard DSP EQ parameters via Bluetooth. This total redesign of the EON platform leverages the latest technologies in cabinet materials, acoustic science, transducer design and user friendliness that delivers the extraordinary quality of a high-end studio monitor in a fully professional, highly flexible, easy to use, portable system for today’s working musicians and sound providers.

• Purposeful Product Design
• JBL Waveguide Technology
• Bluetooth integration - iOS and Android supported Bluetooth v4.0 compliant interface for controlling master volume, adjusting the 5-way, user definable parametric EQ, and saving and recalling user presets
• Durable number 10 nylon coil zippers

User questions & answers

Product features

JBL EON610

More than just another great JBL sound system, the new EON600 is a true step forward in technology developed specifically to deliver the best sound possible regardless of its application. Completely rethinking how truly good an affordable self-contained, portable PA system can be, JBL engineers purposely designed and built the EON600 from the ground up.

Ergonomic and portable

Enclosure designs have been optimized for ideal acoustic resonance taking advantage of injection molding techniques and mechanical shaping of the enclosures. This results in tremendous increases in cabinet volumes which enable better acoustic performance while maintaining the same footprint. Two intelligently positioned handles make the 600 easy to carry and move around. Integrated hardware mounts, designed into the enclosures, allow each model to be flown when required. And indexed feet molded into the enclosures allow for convenient storage and transport, secure stacking for stage monitor and traditional stand up configurations, and unique acoustic configurations.

JBL waveguide technology

The EON610’s extraordinary performance results from a breakthrough approach to waveguide design. JBL engineers examined the radiation characteristics of the EON’s high and low frequency drivers at 36 different points employing JBL’s exclusive, state of the art measurement techniques, then designed the Image Control Waveguide ensuring the sound radiation and coverage pattern match at the high frequencies, the crossover point and the low frequencies. The result is consistent response throughout its 110 degree coverage pattern. The quality and consistency between on axis and off axis response delivers uniform coverage and high intelligibility throughout the coverage area, which means the EON610’s smooth, transparent sound is the same for the entire audience.

Bluetooth integration

Knowing that fine tuning your sound needs sophisticated yet convenient control, JBL engineers developed an iOS and Android supported Bluetooth v4.0 compliant interface for controlling master volume, adjusting the 5-way, user definable parametric EQ, and saving and recalling user presets.

Purposeful Product Design

The total redesign of the EON platform leverages the latest technologies in cabinet materials, acoustic science, transducer design and user friendliness that delivers the extraordinary quality of a high-end studio monitor in a fully professional, highly flexible, easy to use, portable system for today’s working musicians and sound providers.

Product description

USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LEDs. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones. Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LEDs lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R. Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.. When the pad button is pressed in the gain will adjust from 240dB to 0dB. Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want. Built in

• Package Includes: JBL JRX225 Dual 15" Professional 4000 Watt Passive DJ/PA Speakers 4 Ohm JRX 225. Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects, 8 XDR2 Mic Pres. Features of JRX225: JBL JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling.. JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
• Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance.. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details:
• Power Rating : 500 W / 2000 W. Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz. Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb)
• High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBL M115-8A x 2. Input Connectors : Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel. Grille : 18-gauge, powder-coated steel. Features: Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. RMS Power Output: .....750w x 2 @ 4 Ohm .....500w x 2 @ 8 Ohm
• Program Power Output: .....1500w x 2 @ 4 Ohm .....1000w x 2 @ 8 Ohm. Peak Power Output: .....3000w x 2 @ 4 Ohm .....2000w x 2 @ 8 Ohm. 8 Channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones. XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. 1 dedicated USB input to play back music or record the main mix

User questions & answers

Product description

The Sound craft EFX Series combines all the features of the popular Sound craft EPM mixer with a built-in 24-bit, digital Lexicon effects processor, expanding the Sound craft low-cost, multipurpose compact range. The Sound craft EFX12 mixer uses the same processor featured in many of the Digitech and Lexicon outboard equipment including the highly respected Lexicon MX400 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level. The Effects section fits neatly into the mixers compact framework which is available in 8 or 12 mono input variants, both with 2 stereo channels and an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility. The emphasis with the Sound craft EFX is very firmly on quality build and audio performance, with an easy to understand control surface in line with the Sound craft professional range. The Sound craft EFX12 uses the highly-transparent GB30 Mic amp (designed by Graham Blyth for the company’s 30th anniversary, and also used on the larger LX7ii and GB Series professional consoles). The Sound craft EFX also offers all the features of the Sound craft EPM most notably a configurable aux send, XLR and ¼" metal jack connector sockets, RCA phono stereo playback inputs and record outputs, 3-band EQ with a swept mid on the mono inputs, 3-band EQ on the 2 stereo inputs, TRS insert sockets, inserts on all mono inputs, ten-segment LED output metering and a headphone output.

• 8+2 and 12+2 channel frame sizes
• Built-in 24 bit Lexicon digital effects processor
• 32 FX settings
• Tap Tempo and FX setting store function
• XLR-type and ¼” metal jack connector sockets
• RCA phono stereo playback inputs and record outputs

User questions & answers

Product features

Soundcraft EFX12

The emphasis with the Soundcraft EFX is very firmly on build quality and audio performance, with an easy to understand control surface in line with the Soundcraft professional range. The Soundcraft EFX uses the highly-transparent GB30 Mic amp designed by Graham Blythe. The Soundcraft EFX offers a configurable aux send, XLR and ¼" metal jack connector sockets, RCA phono inputs and outputs, 3-band EQ, inserts, ten-segment LED output metering and a headphone output. The Effects section fits neatly into the mixers compact framework with an effects send on each channel. There are 32 effects to choose from with a tap tempo function, 3 effects parameter controls and a user effects setting store facility. An effects channel level clip LED and Mute function gives the user even more flexibility.

Product description

Take your karaoke parties to the next level with the JBL PartyBox 310. This mobile entertainment machine is designed to perform anywhere and everywhere your music takes you. Built-in mic and guitar inputs, perfect for live performances, while a dynamic light show, cool vocal effects and 240 watts of JBL Pro Sound make you look and sound like a rock star. With Bluetooth connectivity and 18 hours of battery life, the entertainment options are endless. Bring life to the party with the JBL PartyBox 310

• 240 watts of powerful jbl pro sound
• mesmerize your crowd with a dazzling, dynamic light show that dances to the beat with subtle pulsing and powerful strobing effects
• long lasting sound with 18 hours of music-blasting battery life
• crafted with ipx4 splashproof protection, the jbl partybox 310 keeps the music going — rain or shine
• switch tracks, change up the light show, control karaoke features and more all from your phone with the partybox app.
• Included components: JBL PartyBox 310, Power Cord, Quick-start guide, Warranty sheet, Safety sheet
• Power source type: Battery-Powered

User questions & answers

Product features

Portable party speaker with dazzling lights and powerful JBL Pro Sound

Huge sound, dazzling lights and unbelievable power set this speaker apart from the crowd. The JBL PartyBox 310 packs a full party into a transportable, splashproof sound machine like no other. Bring big party vibes with 240 watts of JBL Pro Sound and a synced light show that grooves to the beat. Plug in and keep the fun going all night or wheel over to the campfire and take advantage of its impressive 18-hour battery life. Start a party with the JBL PartyBox 310.

Powerful JBL Pro Sound

Around the block or across the beach, make your party heard with 240 watts of big JBL Pro Sound. Sing, rap, strum — then turn up the bass and watch the dance floor come alive

Light up the night

Mesmerize your crowd with a dazzling, dynamic light show that dances to the beat. With subtle pulsing and powerful strobing effects, there's a setting for every vibe.

Keep the party going

Go from the opening act till way past sunrise with 18 hours of music-blasting battery life. Want to party longer? Just plug the JBL PartyBox 310 into an outlet and dance the weekend away.

Product description

The signature 10 is a high-performance 10-Input small format analogue mixers with onboard effects. It features smooth, premium-quality faders with GB series audio routing with flexible pre/post switching on each AUS. , and subgroups with powerful routing and switching options as well as dedicated outputs. The console is built using tour-grade robust metal construction and top-quality components and have an internal universal power supply.

• High-performance 10-Input small format analogue mixers with onboard effects
• Iconic Sound craft Ghost mic preamps with ultra-low noise performance
• Renowned Sound craft sapphire British EQ with sweepable mid-bands per channel
• Lexicon effects engine featuring award-winning reverbs, delays, Choruses and Modulations
• Dbx Limiters (High-ratio Compressors) on input channels

User questions & answers

Product features

Soundcraft Signature 10

All Soundcraft Signature Series consoles incorporate our iconic Ghost mic preamps and employ Sapphyre Asymmetric EQ to deliver extraordinary, professional audio quality.

The Legendary British Sound

From humble beginnings in London more than 40 years ago and still designed and engineered in the UK, Soundcraft defines the term 'British Sound' in live sound mixing consoles. Acclaimed Ghost mic preamps and our Sapphyre 'British' equalizer ensure the Signature range carries the Soundcraft signature sound today.

Iconic Ghost Mic Preamps

It's no secret that great sound starts with a great microphone preamp. Inheriting technology from our top-of-the-line professional consoles, our acclaimed Ghost mic preamp delivers stunning audio fidelity, with high headroom, wide dynamic range and superb signal to noise ratio.

Soundcraft Sapphyre British EQ

To get every element sounding great in your mix, from the kick drum to the lead vocal, you need a great EQ. Famed for its musical sound and unmistakable 'British' quality, Signature Series mixers feature our highly regarded Sapphyre EQ. Signature 10 & 12 feature a 3-band EQ with sweepable mid.

Switchable Hi-Z instrument Inputs

Eliminate fuss by connecting instruments directly to your mixer. Removing the need for DI boxes or additional hardware, Signature Series mixers make it simple to get a great instrument channel sound using the switchable Hi-Z inputs, optimized for acoustic guitars, electric guitars and basses.

Flexible Soundcraft GB Audio Routing

Giving you maximum flexibility, the Signature Series mixers feature comprehensive Soundcraft GB Series audio routing with flexible pre/post switching on each Aux and subgroups with powerful routing and switching options as well as dedicated outputs.

Built Tough for the Long Haul

We understand the importance of reliability. Every night, Soundcraft consoles run the biggest shows in the world. With a robust metal construction and premium-quality components, Signature Series mixers are built to withstand the rigors of extensive use and deliver years of maintenance-free operation.

Easy Playback and Recording via USB

Enabling simple playback and recording, Signature Series mixers are loaded with a 2-channel USB audio interface, ideal for playing music from a computer and capturing a stereo mix of a live performance or rehearsal. Signature Series mixers also include Ableton Live 9 Lite DAW software. MTK models feature multi-channel, ultra-low latency USB audio interface.

Soundcraft Pro Lexicon Effects

Need effects? You’ve got Lexicon. With the Signature Series you don’t just get generic, dull processing algorithms. The Lexicon Effects Engine powers your mix with studio grade Reverbs, Delays, Choruses and Modulations, designed to add a truly professional edge to your productions.

Product description

JBL Quantum 100 over-ear gaming headset. The JBL Quantum range delivers a sound experience that transforms each headset into a crown for the everyday champion. The JBl Quantum 100 comes with the JBL Quantum Sound signature which gives player the advantage of easily pinpointing incoming fire, hearing enemies creeping up from behind as well as feeling the roar of explosive action, all to enhance your gaming experience. Built by our team of acoustic engineers and tested extensively with gamers around the world so that every game is more immersive to give you a competitive edge. The JBL Quantum 100 delivers an accurate soundscape so you can amplify all your epic gaming moments. Product details: Wired over ear gaming headset, JBL Quantum Sound signature, 3.5 mm connection, Detachable boom microphone. For over 70 years, JBL has engineered the most precise, impressive sound found in big venues around the world. JBL's mission and vision is to make life more connected, entertaining, personalized and productive. It combines passion and purpose to design smart products, systems, software and services to connect people wherever they are.

• In competitive gaming, sound is survival, and JBL knows great sound: From the thrill of tracking enemies in FPS games, to engaging in epic MOBA battles, the JBL Quantum 100 amplifies every victory on PC, Mac, Xbox, PS4 and Nintendo Switch
• Features JBL Quantum Sound Signature which is engineered for accuracy and delivers immersive gaming audio for a competitive edge, so users never have to miss a step, shot or jump during game play
• JBL Quantum 100 gaming headset incorporates a detachable boom microphone with echo cancelling technology, allowing users to focus on their teammate's voice rather than background noise, for crystal clear communication
• Memory foam ear cushions on the JBL Quantum 100 headset are covered in soft PU leather, providing comfort for marathon gaming sessions, 3.5mm connection for multi-platform gaming on PC, Mac, Xbox, PS4 and Nintendo Switch
• Items delivered: JBL Quantum 100 wired over ear gaming headset with detachable boom mic in black, compatible with PC, Mac, Xbox, PlayStation, Nintendo Switch, mobile and VR

User questions & answers

Product features

Wired over-ear gaming headset with a detachable mic

Featuring JBL QuantumSOUND Signature, the JBL Quantum 100 headset puts you in the center of the action. Own the game with immersive sound that lets you hear the tiniest details and feel every explosion, a voice focus detachable boom mic for clear communications and lightweight, memory-foam comfort.

Product description

Sound craft have unveiled another addition to the rapidly growing new Sound craft family, the multi-format low-cost EPM mixers. The emphasis with the Sound craft EPM 8+2 is very firmly on quality build and audio performance, with an easy to understand control surface uncluttered by unnecessary facilities, and Sound craft have brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company’s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types. A unique feature of the signal monitoring is the PEAK led. This uses multipoint signal take-offs to watch for overload in several parts of the channel strip, and the led lights more brightly as the signal approaches the peak point. For smooth and accurate channel control, the EPM has 60mm high quality faders as used on other Sound craft desks. The monitor output and headphone output work in parallel so that performers can still listen on phones while an engineer is listening on studio monitors. Further features of the EPM series include 2 configurable auxiliary buses; XLR-type and ¼” metal jack connector sockets; RCA phono stereo playback inputs and record outputs; 3-band EQ with a swept mid on mono inputs; 2-band EQ on stereo inputs; TRS insert sockets and inserts on all mono inputs and mix output; Ten-segment LED output metering; Intuitive and comprehensive solo system; Headphone output; Easily rack mountable. The Sound craft EPM will find itself in many applications including live music, recording, houses of worship and multi-speaker installations.

• 2 configurable auxiliary buses
• XLR-type and ¼” metal jack connector sockets
• RCA phono stereo playback inputs and record outputs
• 3-band EQ with a swept mid on mono inputs
• TRS insert sockets and inserts on all mono inputs and mix output

User questions & answers

Product features

Soundcraft EPM8

The emphasis with the Soundcraft EPM is very firmly on quality build and audio performance, with an easy-to- understand control surface uncluttered by unnecessary facilities. Soundcraft has brought new technologies and ideas to this very cost-effective range. Surface mount technology is used throughout, using close-tolerance components for high accuracy and repeatable settings for EQ and gain controls. The highly-transparent GB30 Mic amp (designed by Graham Blyth for the company’s 30th anniversary, and also used on the larger LX7ii and GB Series consoles) features high-resolution adjustment over a wide gain range of 55dB, and provides a stunning +22dB headroom through the console. True professional 48-volt phantom power caters for condenser microphones of all types.

Product description

JBL LIVE 650BTNC - In your world, music is essential, so slip on a pair of JBL LIVE 650BTNC wireless over-ear noise-cancelling bluetooth headphones and elevate your day.



Equipped with powerful 40mm drivers, JBL LIVE650BTNC bluetooth headphones deliver JBL Signature Sound punctuated with enhanced bass so every track on every playlist pops. And when the music is the only thing that matters, the active Noise-Cancelling technology allows you to block-out ambient sounds so nothing disturbs your groove. Need some help getting through the day? Easily access Amazon Alexa with a tap on the ear cup and play your favorite playlist, text your friend or check the weather and much more, without glancing at your phone.



But that’s not all. With a cool, lightweight and comfortable design, you’ll enjoy up to 30 hours (up to 20 hours with BT + ANC) of music streaming with 2 hours of recharging time, multi-point connection capabilities and a convenient detachable cable with remote with microphone, that lets you play on even when the battery goes off. Rock out uninterrupted with the JBL LIVE650BTNC bluetooth headphones.

• JBL Signature Sound
• 30 Hours Battery Life; 2 Hours Recharging Time
• Bluetooth technology.Bluetooth version: V4.2
• Active Noise Cancellation
• Ambient Aware and TalkThru Technology

User questions & answers

Product features

What's New

Equipped with powerful 40mm drivers, JBL LIVE650BTNC headphones deliver JBL Signature Sound punctuated with enhanced bass so every track on every playlist pops. When the music is the only thing that matters, the active Noise-Cancelling technology allows you to block-out ambient sounds so nothing disturbs your groove. And with a cool, lightweight and comfortable design, you’ll enjoy up to 30 hours (20 hours with BT + ANC) of music streaming with only 2 hours of recharging time

JBL Signature Sound

40mm drivers and a sound signature that can be found in the most famous venues all around the world.

Hands-free calls

Stay in touch with your world by managing calls with the buttons on the ear-cup. When the battery is flat, just plug-in the audio cable and continue listening and chatting

Press play. Mute distractions.

Keep the noise away and stay focused on the music with Active Noise Cancelling.