Product description

Spread your sounds around your home or business with this Monoprice 8-Channel Speaker Selector! This speaker selector allows you to connect up to eight stereo speaker zones. Each zone can be individually toggled on or off with the front panel switch. Built-in impedance-matching circuitry ensures that the overall impedance level to the amplifier does not drop below 5 Ohms no matter how many speaker zones are selected or how many speakers are in each zone. The impedance-matching protection circuitry can be disabled using a front-panel button but this should only be done if there is another protection circuit employed or the system is carefully designed to avoid amplifier damage. The unit can handle up to 100 watts per channel with the protection circuitry enabled and up to 200 watts per channel with the protection circuit disabled.

• Spread your sounds around your home or business with this Monoprice 8-Channel Speaker Selector!
• This speaker selector allows you to connect up to eight stereo speaker zones
• Built-in impedance-matching circuitry ensures that the overall impedance level to the amplifier does not drop below 5 Ohms no matter how many speaker zones are selected or how many speakers are in each zone
• can handle up to 100 watts per channel with the protection circuitry enabled and up to 200 watts per channel with the protection circuit disabled
• Included in the Box: 1x 8-Channel Speaker Selector | 1x User's manual | 1x Card with stickers for identifying channel zones

User questions & answers

Question:	Has anyone done amp to selector to another cheap amp to add more power? Receiver/amp ==> selector i/p ==> (1-4) o/p==> amp ==> volume ==> speaker
Answer:	The manufacturer lists 100 Watts RMS per channel.
Question:	I already have a 7.2 receiver, I want this switch to add 3 more pairs of speakers for other rooms, do I need an amp? where do I put the amp
Answer:	Yes it distributes the power equally and saves your amp very glad I bought it works great and you can adjust volume in any room worth the money I think
Question:	I saw each channel only allow 70w if the circuit protection is enabled. Can I use speakers of more than 70 outputs and turn all 6 on, will all 6 work
Answer:	Built our new patio home three years ago . use this with whole house speakers , love it no problems
Question:	What does this have to do with cellphones
Answer:	This speaker selector should be a great solution for this setup. Contact AV-Express with further questions.

Product description

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
• CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
• PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked

User questions & answers

Question:	I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible
Answer:	I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you.
Question:	Does this switch allow me to control sets of speakers independently
Answer:	I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp.
Question:	One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist
Answer:	Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier.
Question:	How do I hook this up to my 5.1 receiver
Answer:	The sound is great there is no distortion.

Product features

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• ZONE CONTROL: This high power speaker selector is an effective way to distribute music to eight listening zones and includes individual on/off selectors for each zone and is constructed of 14-gauge steel.
• DESIGN: The ISS8 is a single source speaker distribution system with individual on/off selectors for each listening zone which distribute one stereo speaker-level signal from your amplifier across 8 zones.
• CONNECT: The phoenix connectors on the ISS8 are easily removable to avoid frustration when connecting multiple speakers. With screw-down terminals, the speaker wire cable will never come loose.
• IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
• EASY INSTALLATION: The low profile ISS8 is constructed of heavy-duty steel and allows easy access to the protection switch. The black brushed aluminum design easily fits into a cabinet or anywhere in the home.

User questions & answers

Question:	My Yamaha Receiver (750) has A and B speaker outputs. Would I connect the ISS4 inputs to the B outputs and then run 4 separate speaker pairs from the B side of the receiver leaving the A side for the main listening room speakers
Answer:	It really depends on the type of speaker configuration you have in your main zone. If you have a 5.1 environment in your main zone the best option is to connect the iss4's inputs to the zone 2 terminal on the back of your 750. This will allow you to listen to different sources in each zone at the same time. For instance you could watch a DVD in your main zone and in zone 2 you could be listening to an iPod or the fm tuner. Hope this answers your question, if you choose this option then remember you can only listen to analog sources in a zone 2 setup.
Question:	I can see how to select zones, how do you select the source? I have a phono amp and home theater amp I need to switch between, one set of speakers
Answer:	There is an round A/B button next to each rectangular zone button. Undepressed your are selecting source A. Press the button in and you are now selecting source B.
Question:	Can I run the 6 pairs of speakers at the same time? If this can be done, the volume drops
Answer:	Of course the volume drops. You will have 6 parallel circuits, each getting 1/6 the current. Basic rules of electricity.
Question:	I've bought this and I have connected it to 4 zones of in-wall speakers but the volume is extremely low! Do I need a receiver before the input
Answer:	What are you powering the speakers with?? In an ideal setup this device would be connected after the stereo amplifier or a/v receiver. It's is recommended to have an power source of at least 50W per channel supplying power to this volume selector. If you have impedance matching volume controls make sure the protection circuit button is in the off position(pushed out). If you have no volume controls push the circuit protection button in so that it equalizes the impedance.

Product features

Dual Source

The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.

Volume Control

Using the same technology as our in-wall volume controls, most units offer volume control per zone.

Impedance Protection

Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.

Easy to Install

Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.

OSD Audio 8-Zone Single Source Speaker Selector

The ISS8 high power speaker selector is an easy and effective way to distribute music to up to eight listening zones (eight pairs of speakers) and play any pair, a combination of pairs, or all pairs simultaneously. East to connect with a low-profile design that easily fits into a cabinet or equipment rack.

Product description

Pyle Model : PSLSW4

4-Ch. Speaker Selector System

Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System

Features:

Convenient Audio Control for Up to 4 Pairs of Speakers

Home Theater Stereo Amplifier System Support

Independent Audio Source Channel Volume Controls

Input/Output: Screw Type Connector Terminals

Compact Desktop / Tabletop Receiver Design

Front Panel Button Control Center

Master Power Switch

Built-in Electronic Overload Protection Circuitry

Technical Specs:

Power Handling: 100 Watt MAX Per Audio/Speaker Channel

Speaker Selector Type: 4-Channel

Speaker Cable Wire Support: Up to 14-Gauge (14 AWG)

Minimum Impedance: <8 Ohm

Frequency Response: 20Hz-20kHz

Dimensions (L x W x D): 16.9'' x 6.3’’ x 3.0'' -inches

• 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
• CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
• INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
• EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
• OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability

User questions & answers

Question:	Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you
Answer:	Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps.
Question:	I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together
Answer:	Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps.
Question:	Can the speaker connectors take banana plugs as opposed to threading the wires
Answer:	I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly.
Question:	So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to
Answer:	Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though.

Product features

4-Ch. Speaker Selector System

This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.

CONTROL 4 SPEAKERS

The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire

INDEPENDENT AUDIO CONTROL

Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.

EASY SETUP

Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance

Protection

Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.

Watt

The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup

Dimensions

The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.

Product description

PyleHome Model : PSS8

8-Ch. Stereo Speaker Selector

8 Channel High Power Stereo Speaker Selector

Up To 8 Separate Speakers Pair To Your Stereo System.

Accepts Speaker Wires Up To 14-Gauge.

Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum Impedance Of 8 Ohms.

Protection Circuitry Keeps It Running Smoothly

Frequency Response: 20Hz-20KHz

Dimensions 12.8'' X 2.04'' X 6.12''

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
• CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
• PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
• Up To 8 Separate Speakers Pair To Your Stereo System
• Accepts Speaker Wires Up To 14-Gauge

User questions & answers

Question:	Does this unit have impedance matching transformer feature
Answer:	Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you.
Question:	I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device
Answer:	I think you will be fine, depending on how long your wire runs are.
Question:	Can you use it the opposite way....multiple recievers to one set of speakers
Answer:	No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera
Question:	How can it be both new and improved
Answer:	Increase connectivity range

Product features

Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR

The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.

PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE

The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.

PLUG AND PLAY EASY INSTALL

The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.

Product description

Theater Solutions 8 channel speaker selector box is used in conjunction with your current home theater amp/receiver. This selector box allows you to add up to 8 pairs of speakers, while providing protection to your amp/receiver. The easy push button design lets you activate each pair individually to customize the listening experience in your home. Installation could not be easier!! Simply connect the left and right outputs from your amp/receiver to the left and right inputs on the selector box, connect up to 8 pairs/16 speakers and you are ready to enjoy. This selector box also features a single pair impedance protection, soft rubber feet and Black steel housing. Great sound when used in conjunction with Theater Solutions in wall and in ceiling speakers.

• Theater Solutions TS8 passive 8 zone speaker selector box, connects up to 8 pairs of speakers at 4 to 16ohm, one to all zones can Be engaged at the same time
• Handles up to 300W RMS per Channel, amplifier or receiver impedance protection, accommodates 14 to 22 gauge speaker wire, spring loaded wire connectors
• Dimensions are (H x W x D) 2.1875" X 17" X 4.875", steel housing and rubber feet, passive design, No power required, pre-printed zone labels for easy speaker connection and identification
• Designed and engineered in the USA, full instructions included, Use for home audio systems, whole house Audio, business or office Audio
• This Listing and price is for 1 speaker selector box

User questions & answers

Question:

Can this be mounted

Answer:

Takoma's response is correct. You can use the default Scroll Lock-Scroll Lock-Enter hotkey to do the switching instead of the dedicated button provided. In my experience, the dedicated button seems to switch faster than the hotkey. The screen swaps and keyboard/mouse input seems to come alive in under 2 seconds with the dedicated button, as opposed to using the hotkey which seems to get the keyboard/mouse going in about 2 seconds, but the screen catches up another 2 seconds later for a total of 4 seconds.

Product description

This 8-Channel Speaker Zone Hub is designed to connect up to eight pairs of speakers to a single amplifier or receiver. It uses removable terminal blocks for easy connection for the speaker wires. Note that this speaker selector does not include impedance matching circuitry, so the use of impedance matching volume controls are highly recommended to prevent damage to the amplifier caused by low impedance loads.

• Designed to connect up to eight pairs of speakers to a single amplifier or receiver.
• Uses removable terminal blocks for easy connection for the speaker wires.
• Note that this speaker selector does not include impedance matching circuitry.
• The use of impedance matching volume controls are highly recommended to prevent damage to the amplifier caused by low impedance loads.
• 8-channel speaker zone hub.

• Cardioid Pickup Pattern - The cardioid pick-up pattern of Mugig Condenser Microphone can minimize the background noise, reducing unnecessary ambient noise and interference echo from the side and back and improving the isolation of the required sound source, which is ideal for podcasting, streaming, youtube video and also can be used for recordings at home or professional studio.
• Excellent Sound Quality - With wide frequency response(20Hz-20000Hz), Mugig microphone can capture vocals, acoustic guitars, acoustic pianos and even strings.
• High Compatibility - Fully compatible with most mainstream operating system such as windows and mac os. If you want to use our Condenser Microphone on laptop, phone, pad and other devices, please connect to an additional 48V phantom power and an external sound card.(Not include in package)
• All-In-One - Package includes Mugig Condenser Microphone, Adjustable Suspension Scissor Arm Stand, Shock Mount, Pop Filter, XLR Cable, Anti-wind Foam Cap (Note: Phantom Power not included).
• Stable & Portable Design - The shock mount of Mugig PC Mic is made of solid metal, whic can effectively reduce trill caused by vibration. Super-strong stand spring protects microphone from shaking, suddenly dropping and making noise.

User questions & answers

Question:	how long is the arm fully extended
Answer:	3'
Question:	I have a headphone plug in a high power laptop; Realtek high power sound system with Nahimic 2 audio quality. should it work
Answer:	put a 48 volt phantom power source in line, to power the transduction field and, the output provided in the phantom box goes into your computer. Make sure your phantom source has constant variable output attenuation, to line level the input..... perhaps a small mixer with phantom power would be your best bet. WATCH TOUR METERS!!!!!
Question:	does it come with a usb cord
Answer:	Ours did not come with the USB cord
Question:	Is this a cardioid mic
Answer:	Yes, with the axis perpendicular to the logo on the body. As pictured, the most sensitive part of the pattern is facing you.

Product features

Specification

Body size: 48 x 158 mm (diameter x length)

Package size: 50 * 20 * 10 cm

Product weight: 1030 g

Cable length: about 2.5 m

Microphone material: high quality aluminum alloy

Mike Draft Shield Material: Sponge

Shock mount material: metal

Directivity: Unidirectivity (cardioid)

Frequency response: 20 Hz - 20 KHz

Specification

Sensitivity: 37 db ± 2 db (0 dB = 1 V / Pa at 1 KHz)

Output impedance: 1500 Ω ± 30% (at 1 KHz)

Load impedance: ≥ 1000 Ω Equivalent noise level: 16 dBA

Allowable sound pressure range: 135 dB (at 1 KHz ≤ 1% T.H. D)

Microphone output interface: 3.5 chuck

S / N ratio: 78 dB

Package Included:

- 1 x Podcasting Condenser Microphone

- 1 x Microphone Suspension Scissor Arm Stand

- 1 x Table Mounting Clamp

- 1x 3.5mm Male to XLR Female Cable

- 1 x Metal Shock Mount

- 1 x Microphone Pop Filter

- 1 x Foam Protective Anti-wind Cap Cover

Product description

pyle Pro Pss8 High Power Stereo Speaker Selector

• Leading manufacturer of high-quality products
• International renown for our diverse range of award-winning products
• Fully equipped with state-of-the-art technology
• All our products have been designed with the professional in mind
• User Friendly style and design

Product description

Pimax Vision 8K X VR Headset with Dual Native 4K displays (Standard Headphone Version)

• Dual Native 4K Displays- Pimax 8KX, powered by two full-sized 4K panels rendering a native 3840x2160 resolution per eye, is currently in the front-line of the Virtual Reality industry with the highest fidelity and image clarity. By using industry-leading LCD panels with a highest possible pixel count and nearly 50% increased subpixel density, the Pimax 8KX is able to minimize the Screen Door Effect and create the most impressive Virtual Reality experience possible today.
• Ultra Wide 200° FOV- Pimax 8KX renders an ultra-wide Field of View of 200 degrees diagonally, which is very close to real life human vision FOV. This makes the VR experience significantly more natural and immersive. Playing VR games does no longer feel like looking through binoculars - and the panels will never limit your view. The Pimax 8KX delivers an unparalleled true-to-life virtual reality experience - like never before!
• Dual Engine Mode- The Pimax 8KX offers a built-in Dual Engine Mode, giving users the ability to switch between two different display modes: a native 4K resolution mode rendering true 3840x2160p resolution per eye, and an Upscale Mode transferring a 2560x1440p resolution directly to the 4K panels.The Dual Engine selector is easily accessible directly within the Pimax software .
• New Ergonomic Design- To ensure more realistic and highly comfortable VR sessions, Pimax is now introducing a new and significantly improved comfort solution together with high fidelity audio speakers. The brand new Pimax Comfort Kit and Modular Audio Strap bundled with every 8KX headset, ensures that you get the most comfortable, the most immersive and a completely hassle-free VR experience – hour after hour!
• Recommended PC Specifications- OS: Windows 10; GPU: NVIDIA RTX 2060 or above (using upscale mode), NVIDIA RTX 2080 or above (using Native 4K mode); CPU: Intel I5-9400 or above; RAM: 8GB or more; Output: USB2.0/3.0, DisplayPort v1.4.

User questions & answers

Question:	What Is the weight? The description says 8.2 pounds and that just can't be right
Answer:	It's a re-release of two games as one game.
Question:	I do stationary VR mostly with a hotas or steering wheel and pedals, will i need a base station for that
Answer:	Yes the ps 4 version has all the extras
Question:	Does this come with the thin 11mm pad
Answer:	Optional
Question:	If i get this through amazon vs. pimax shop, does it include the coupon for the 6m fiber optical cable
Answer:	you can port japanese PS3 data but thats it you get 3 system storage files 2 use, U can"t port vita data though