13 best wireless access point for homes

Product description

EAP225 supports both 802.3af PoE and passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.



Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.



MU-MIMO capability requires client devices that also support MU-MIMO.



Seamless roaming requires both the access point and client devices to support 802.11k and 802.11v protocols.

• 【Superior Speeds with MU-MIMO】Designed with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225 reliably delivers dual-band Wi-Fi speeds up to 1350 Mbps to multiple devices at the same time.
• 【Integrated into Omada SDN】Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways. Pick your preferred method of network management from these Omada offerings - Omada hardware controller, Omada software controller or Omada cloud-based controller. Standalone Mode also applies.
• 【Cloud Based Controller】Zero-Touch provisioning (coming soon) allows remote deployment and configuration of multi-site networks. AI-Driven Technology (coming soon) delivers stronger performance and easy network maintenance. Additional fees apply for use of cloud-based controller.
• 【Cloud Access】Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime.
• 【SDN Compatibility】For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN APs, Switches and Routers. Non-SDN controllers work only with non-SDN APs. For devices that are compatible with SDN firmware, please visit ‘From the manufacturer – Q&A’ section or tplink website.
• 【Advanced Wireless Tech】Support Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies.
• 【Multiple PoE Options for Easy Installation】EAP225 supports both 802.3af/at PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible.
• 【Limited Lifetime Warranty】Backed by our industry-leading limited lifetime warranty and free 24/7 technical support, you can work with confidence.

Product features

Seamless Roaming

Seamless roaming switches clients to the AP with the best signal automatically, even when moving. This allows sensitive applications like VoIP and video conferences to go uninterrupted.

Omada SDN with Flexible Management and Cloud Access

Omada SDN integrates network devices including access points, switches & gateways with multiple control options provided - Hardware controller, Software Controller & Cloud-based Controller. Centralized cloud allows for remote management of the entire network via a single interface anywhere, anytime.

Cloud-Based Controller Unlocks More Possibilities

Zero Touch Provisioning (coming soon) allows for remote deployment and configuration of multi-site networks. AI-Driven technology (coming soon) delivers stronger performance and easy network maintenance.

Both require the use of cloud-based controller.

Product description

The NETGEAR WAC104 is a dual band 802.11ac wireless access point for the small business, coffee shop or dental office looking for low maintenance, superior WiFi that is easy on the IT budget. The no-frills WAC104 features external antennas that provide a far reaching, rock solid WiFi signal and transfers data at speeds up to 1.2Gbps. Adding more value, the WAC104 is conveniently equipped with four Gigabit Ethernet ports to further extend the wired network and comes with a segment leading 3-year hardware warranty and lifetime chat support. WAC104 – Fast, reliable WiFi that just works. Backward compatible to allow legacy devices to connect at their fastest speed. Powerful 880MHz processor.

• Fast dual band 802.11ac WiFi at a combined aggregate speed of 1.2 Gbps (300Mbps at 2.4 GHz and 867Mbps at 5 GHz)
• Factory tuned external antennas provide superior signal and far reaching WiFi coverage
• Advanced Security & Flexible Wireless Configuration - access point, and WDS point-to-point / point-to-multipoint wireless bridge mode.Memory:128MB NAND flash and 128MB DDR3 RAM
• Works with all N150, N300, N600 and AC devices. IPV6 support for improved performance
• Easy to setup and configure with WiFi Protected System (WPS) button for easy one-touch client connectivity
• Four built-in Gigabit Ethernet ports to connect to PC, laptops, and other wired devices

User questions & answers

Question:	Can you hook an external antenna to unit
Answer:	I do not see any mention of hooking an external antenna to this unit in the owner's manual.
Question:	I don't see a wan port on this ac, it doesn't have one
Answer:	This product is a wireless access point, often called simply an AP, or Access Point, and as such it doesn't have a WAN (wide area network) uplink port. You would connect this product to a regular LAN (local area network) port on an Ethernet (wired) router which in turn would be connected via its uplink port to a source of Internet access such as a cable modem that has been supplied to you as part of your cable company Internet access plan.
Question:	How do I get this to work as an access point with my Xfinity gateway/modem/router? It's connecting but no internet
Answer:	1. You have to program the AC1200 using the admin account to act as an access point. Connect your pc directly to the AC1200. Turn the AC1200 on before you turn on your pc so that your pc gets a tcpip (internet) address that is compatible with the AC1200. 2. Login to the AC1200 with the admin account. Use your web brouser to get to the admin account. The default web address is usually 192.168.0.1 3. You have to disable the dhcp function on the AC1200. The Xfinity router needs to be the only device to assign dhcp addresses. If you don't disable the AC1200 from assigning dhcp addresses it will create a subnetwork that is separate from the Xfinity network using a different address range. (Usually starting with 192.168.000.002 to 192.168.000.255). 4. Setup any security settings and network names before you enable the access point mode. 5. Save your new settings and write down any passwords that you may have changed. 6. I also usually put a static IP address in the access point that is in the range of the Xfinity router. That way you can gain accesss to the AC1200 later because you know its address. 7. Plug in an ethernet cable from the Xfinity router to one of the 4 lan outputs of the AC1200. It might also work if you use the wan port (yellow connector) if Netgear updated their software. If you use one of the 4 outputs it guarantees that the access point will be part of the existing Xfinity network.
Question:	Can this set up.as a repeater (wifi extender
Answer:	A WAP or Wireless Access Point is different than a "repeater or WiFi extender". The primary function of this device is to plug a Cat 5/5e/6 cable into one of the ports. It connects by "hardwire" to your network first, then broadcast the WiFi signal. A WiFi Extender/repeater on the other hand connects by wireless to another wireless access point. You must determine "where" you want to connect first. The "range" will determine the antenna selection. See this graphic: https://www.google.com/search?q=db1+antenna+Wifi&espv=2&biw=1013&bih=426&source=lnms&tbm=isch&sa=X&ved=0ahUKEwinx8uL4fvRAhXFhlQKHYinCK4Q_AUIBygC#tbm=isch&q=db1+antenna+Wifi+range+images&imgrc=lV_VC2Rf01X2XM:

Product features

NETGEAR AC1200 Dual Band Wireless Access Point (WAC104-100NAS)

The NETGEAR Dual Band 802.11ac Wireless Access Point (AP) delivers high performance for Small Office and Home Office (SOHO) deployments and supports dual band concurrent operation at 2.4GHz and 5GHz with combined throughput of 1.2Gbps (300Mbps at 2.4GHz and 867Mbps at 5GHz). The WAC104 Wireless 802.11ac Access Point provides ease of use in standalone access point mode.

Product description

AC1200 wireless router, Gigabit, dual Band, beamforming, MU-MIMO.

• JD Power Award ---Highest in customer satisfaction for wireless routers 2017 and 2019
• Dual band router upgrades to 1200 Mbps high speed internet (300mbps for 2.4GHz + 900Mbps for 5GHz), reducing buffering and ideal for 4K stream
• Gigabit Router with 4 Gigabit LAN ports, ideal for any internet plan and allow you to directly connect your wired devices
• MU-MIMO technology (5GHz band) allows high speeds for multiple devices simultaneously
• AP mode, can be switched to access point mode to share your internet wirelessly
• Supports guest WiFi and parental control, an ideal wireless router for home
• TP-Link tether app - easily set up and manage your home network at home or remotely

Product features

Smooth Entertainment with AC1200 Dual-Band WiFi

The Archer A6 creates a reliable and blazing-fast network powered by 802.11ac WiFi technology. The 2.4 GHz band delivers speeds up to 300 Mbps giving you faster email and web browsing, while the 5 GHz band delivers speeds up to 867 Mbps for lag-free online gaming and HD video streaming.

Coverage throughout Your Home

Four external antennas, one internal antenna, and a powerful chipset work together to send WiFi to every corner of your home. Stay connected and enjoy fast WiFi whether you’re lounging on the sofa or relaxing on the balcony.

Product description

Model

Spec

Features

Manufacturer Warranty

• 300Mbps wireless transmission rate, brings smooth wireless N experience
• Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
• Easily setup a WPA encrypted secure connection at a push of the QSS button
• Up to 30 meter (100 feet) Power over Ethernet capability for flexible deployment

User questions & answers

Question:	Is it possible to replace one of the omni directional antenna with an RP-SMA cable from one of those 24dbi antenna and use this AP as a repeater
Answer:	You would need a Powered Antenna adapter. Basically the powered antenna hooks to the RP-SMA slot, then has the powered hub, and then you put a % dbi antenna on it and it'll get 2x more antenna strength. Even 2x more then what you'll use for a higher DBI antenna. So if you use a 24dbi antenna, it'd more be like a 48dbi antenna. So if you use double 10dbi antennas with the power adapter. that'll be more then enough to have signal strength to get all the house at max, even if
Question:	Confused. It says "wireless" but yet asks to be hooked to computer. Can someone explain please
Answer:	This is a wireless access point not a router, that means that it only provides a wireless signal for computers, tablets phones etc. It must have a wired connection to it from the internet. It does not have a firewall so if you have a internet connection only at this time you should get a model with a router/firewall not this model.
Question:	Can this access point have the same SSID as my main router in order to be able to access the same network
Answer:	It's going to be connected to the same network and can have the same SSID. I use mine as an access point at the other end of the my house and gave it a slightly different name so I would know which device (my router also has wireless connectivity). I could always look at signal strength and tell the difference, but I like the slightly different name.
Question:	I need to have internet in a device that only takes ethernet.Can this device pick the wireless signal and give internet to my device using ethernet
Answer:	Also note that the ethernet port is only 100Mbit. So if your existing WiFi is usually capable of more than 100Mbit, for example your WiFi internet is 150Mbit or more, you will only get around 100Mbit or a little less to your ethernet device. You'd have to pay a little more money for a different device with a GigaBit ethernet port if you want to get anything more than 100Mbit out of this ethernet port.
Question:	The description states it has four antennae to give it an extended range, but the picture does not reflect that information. Where are they
Answer:	Hi, Dave. The antennae of the Linksys EA2700 is installed inside the router.
Question:	My question is this router compatible with spectrum/time warner
Answer:	yes - have had it for over a year no problems, added an extender and still doing well

Product features

Wireless N - Speed & Range

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes- Easy to Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported- More Flexible Deployment

The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

Product description

EnGenius EnTurbo EAP1300 is an enhanced Indoor 11ac Wave 2, MU-MIMO Dual-Band Wireless Access Points that turbocharges wireless performance for small and mid-size businesses. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed, performance, and greater user device capacity and connection reliability. EAP1300 delivers next generation, business-class Wi-Fi at exceptional pricing.

Turbocharged Wireless Performance

Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band, the EAP1300’s powerful Qualcomm 717 MHz quad-core processor turbocharges wireless performance and efficiency with up to 30 percent faster throughput compared to 11ac Wave 1 3x3 access points.

Next Generation Wi-Fi

The feature-rich EAP1300 AP leverages the advanced 11ac Wave 2 Wi-Fi technology that maximizes wireless speed and performance while eliminating network lag. EnTurbo offers greater user capacities via dedicated multi-user, MU-MIMO connections and optimal signal reliability through Beamforming Antenna technology.

• Quad-core CPU, 4x arm Cortex A7 Processor, 717 MHz "Turbo engine"
• 11AC Wave 2 Wireless speeds to 867 Mbps (5 GHz); to 400 Mbps (2.4 GHz)
• Up to 30% faster throughput over 11AC Wave 1 3x3 APs
• Mu-mimo improves performance & increases user device capacities
• Beamforming optimizes antenna signal, reception & reliability for clients

User questions & answers

Question:	looking to setup 5 of these on a poe switch, i'd like to broadcast 1 ssid across a hotel building for guest wifi. Is channeling healing offered
Answer:	I went from the router to the Power brick, then the power brick to the UAP-AC-Lite. People are saying they are using switches, but as always, make sure the switch has PoE ports and can support the number of UAP-AC-Lites you attach.
Question:	Need to setup wifi to a separate building 300 yards away with no way for a wired connection. will this product help me achieve this
Answer:	Yes that’s correct. Only thing you should download is the ubiquiti controller. Power runs through the cat 6 if your Switch supports it. If not the injectors that come included provide power.
Question:	How much poe power does this ap require? i have a powerdsine 3001gc that's rated for 15.4w
Answer:	Yes it can
Question:	Does the eap1300 include a 12v 1a adapter as stated in the engenius datasheet on their website
Answer:	Yes

Product features

Turbocharged WiFi

Introducing EnTurbo, the next generation of enhanced 11ac Wave 2 access points and bridges that turbocharge wireless performance for small and mid-size businesses.

EnTurbo expands on the legacy of EnGenius’ top selling EAP/ENS/EnStation Series, a favorite network staple among small and mid-size organizations. Experience the next generation of wireless speed, coverage, and reliability you have come to expect from EnGenius.

EnGenius EnTurbo EAP1300 Indoor 11ac Wave 2, Quad-Core Processor, Wireless Access Point turbocharges wireless performance with enhanced speeds, increased device capacity, and improved connection reliability.

Turbocharged Performance

EnTurbo’s powerful Qualcomm 717 MHz quad-core processor turbocharges wireless performance and efficiency. Boost speeds up to 30 percent faster than 11ac Wave 1 3x3 access points.

Maximized Speed & Performance

11ac Wave 2 technology maximizes wireless speed to eliminate network lag ensuring top-notch network performance. Robust point-to-multipoint 802.11AC wireless performance of up to 867 Mbps on the 5 GHz frequency band and 400 Mbps on the 2.4 GHz frequency band creates a dependable network across great distances. EAP1300 features 23 dBm output power and high receive sensitivity, coupled with embedded high-gain omni-directional antennas to deliver stable robust connectivity.

More User Capacities

Multi-User (MU) MIMO sends dedicated wireless streams to multiple user devices at the same time, improving your network’s efficiency.

Improved Signal Connection Reliability

EAP1300 optimize wireless signals for enhanced reliability, boosted reception and uninterrupted connectivity for users as they move around the network with standards-based roaming and Beamforming Antenna technology.

Stylish, Low Profile Hardware Design

Clean lines and low profile housings ensure EnTurbo Access Points and Bridges will blend into even the most elegant settings both indoors and out. The EAP1300EXT is designed for deployments on ceilings where power outlets may be scarce, it is also standard PoE (Power-over-Ethernet) 802.3at capable when use a PoE switches.

ezMaster Network Management Software

Monitor, manage and receive alerts. Add the power of network management when you need it with ezMaster. This free, easy-to-use tool is perfect for gaining insight into your EnTurbo network. Get under the hood with real-time monitoring, rich reporting and analytics, and more all with no license or subscription fees.

• ✅【Outstanding Function】- High Power Amplifiers PA+LNA 1000mW and enhanced receiver design for more strong penetration & longer range coverage than the general access point, ideal for providing Wi-Fi service in big area such as factory, community, street or etc; Get internet everywhere, Eliminate WiFi dead zones, let you enjoy smooth internet while working from home / working online / telecommuting
• ✅【AC Performance Upgraded Version】- The next generation of Wi-Fi, complies with IEEE 802 11 ac/a/b/g/n standards, Dual-Band maximum speed up to 5GHz 867Mbps and 2.4GHz 300Mbps, it is an upgraded version of AC600(600Mbps); It lets you keep more devices connected at the same time with the dual bands, which is superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks
• ✅【4 x 7dBi Detachable Omni Directional Antennas】- Higher antenna gain extensively strengthens Wi-Fi signal and expands wider coverage in the open air, stability technology automatically avoids channel conflicts using its channel selection feature, meet outdoor long range coverage wireless network requirement, cover hard-to-reach dead zones
• ✅【Design for Harsh Outdoor Environment】- IP65-rated weatherproof & heat-resistant case that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture, withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensure stable connection in harsh outdoor conditions
• ✅【Power Over Ethernet】- Integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlet is not available by combing your power and network data connection into a single RJ-45 cable;【Multi Operation Modes】- Support Access Point (AP), Repeater and Router mode;【1000Mbps Gigabit WAN Port】- Support 10/100/1000Mbps speeds, 10x faster than a standard Ethernet port

User questions & answers

Question:	Can it be used as a booster between att modem and existing belkin extender
Answer:	If your Belkin connect to the ATT modem, then this can be an inbetween booster. I use it to boost from my Sprint modem 300 feet to a storage building where I have another extender that amplifies the signal from 2 bars to 4 bars.
Question:	How does it connect to a router? does it remember and autoconnect? using in rv
Answer:	You could see the instructions in the manual. It is very simple. It depends on what kind of use do you want for this device.
Question:	does this always require a ethernet cable i want use as wifi range extender to outer building 150 feet away with this mounted to that building
Answer:	Yes, it does require an ethernet cable since the power is provided through that cable. The one I purchased is mounted on the building where the main router is located and provides wifi to a spotlight camera a couple hundred feet away.
Question:	what signal strength in DB's is the receiver rated? Reception is more important than transmit power
Answer:	I can not give you an answer in db. But I can say the unit works well and does not have problems with a signal transmitted from my modem 450 feet away, through a brick structure with interior walls. Hope this helps some. Vel

Product features

2.4GHZ AND 5GHZ HIGH TRANSMISSION POWER

Supports the latest 802.11AC Wi-Fi standard,A dual band range extender can boost your existing wireless coverage with speed of up to 2.4GHz on 300Mbps + 5GHz on 867Mbps. Adopts MT7620A+MT7612E dual MTK chips more stable performance.

Dual-band AC1200 Faster Speeds

Use both Wi-Fi bands for HD streaming and gaming, and Up to 300Mbps (2.4GHz) + 867Mbps (5GHz).

Smart Signal Indicator

Thanks to Spot Finder technology, you can check signal indicator to know where the best coverage is, plus using your smartphone, laptop, or tablet.

Quick, Easy Setup

Easy Installation with Power Over Ethernet (PoE).Simply press the Push Button Connect function on the range extender to automatically sync it with your router.

Boost the Wi-Fi Coverage throughout Your Entire Home

Resolve the problem with a weak signal in an excellent manner, it helps to boost the range of your existing WiFi and create a stronger signal in hard-to-reach area

Multi-Operation Modes for Different Network Environment

It supports wireless Access Point, Gateway, Wi-Fi Repeater, Router operation mode. However, For outdoor use, we strongly advise you'd better select AP mode to get a max wireless coverage.

360° of High Power Outdoor More WIFI Coverage

Extend the network over long-distances (max 500m) with Wavlink 27dBm output power coupled with high gain 4x7dBi antennas that deliver network connectivity 360° to large yards and patios. So, it can boost Wi-Fi coverage up to max 𝐴=𝜋𝑟^2(r=500m)= 785,000m2(8,450,000 sqft), which is over 845 times larger than others' only 10,000 sqft coverage!

Excellent Outdoor Weatherproof and Lighting Protection

IP65-rated weatherproof housing withstands broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection,stable connection in harsh outdoor conditions.

Product description

TP-LINK's 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users. Channel Bandwidth - 5/10/20/40MHz Frequency Range: 5.15~5.85GHz. Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.; Interface Available: 1 x 10/100Mbps Shielded Ethernet Port (Passive PoE in), 1 Grounding Terminal, 1 Reset Button, 1 AC Jack with Earth Ground, 1 10/100Mbps Shielded Ethernet Port (Power + Data); Processor: Qualcomm Atheros Enterprise 560MHz CPU MIPS 74Kc; Internal Memory: 64MB DDR2 RAM 8MB Flash; Protocols Supported: TDMA Mode (with Pharos MAXtream enabled); System Requirement: Microsoft Windows 98SE NT 2000 XP Vista, or Windows 10 Windows 8 Windows 7 MAC OS NetWare UNIX or Linux., Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome Safari and Firefox. IE browsers are not recommended.; Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled). Operating Temperature: -40℃~70℃ (-40℉~158℉).

• Built in 9dBi 2x2 dual polarized directional MIMO antenna
• Adjustable transmission Power from 0 to 27dBm/500mW
• System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)
• TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance
• Centralized management system Pharos Control
• AP/ client/ AP router/ AP client router (WISP) operation modes
• Passive PoE adapter Suppots up to 60 meter (200 Feet) Power over Ethernet deployment and allows the device to be reset remotely
• Connectivity technology: Wi-Fi Built In

Product description

Experience faster, stronger Wi-Fi with the pluggable RE450 AC1750 Dual Band Wi-Fi Range Extender. Enjoy 4K HD streaming and online gaming with Wi-Fi speeds up to 1750Mbps. Connect any wired device to Wi-Fi with the available Gigabit Ethernet port. Discover the best location for set up using the Smart Signal Indicator. Beamforming technology finds and boosts Wi-Fi to every device. Frequency Range: 2.4GHz & 5GHz(11ac); Interface Available: 1 x 10/100/1000M Ethernet Port (RJ45); Protocols Supported: IEEE802.11ac IEEE 802.11n IEEE 802.11g IEEE 802.11b; System Requirement: Microsoft Windows 98SE NT 2000 XP Vista or Windows 7 8 10 Mac OS NetWare UNIX or Linux.

• Extend Wi-Fi Coverage - Boosts Internet Wi-Fi Coverage up to 2000 Square feet and connects up to 32 devices - Compatible with any Router, Gateway, Access Point ( 2.4GHz - 450Mbps / 5GHz - 1300Mbps )
• Eliminate Wi-Fi Dead Zones - Enjoy Lag-Free connection to any type of devices, including wired devices via Gigabit Ethernet Port
• Stay connected - Expand coverage for your phone (Galaxy,iPhone,Android etc.), Media Streaming, Gaming, Web Browsing, Alexa, Echo, Ring and more
• Easy Set Up - Smart indicator light helps to install in best optimal location. Three adjustable external antennas for superior coverage throughout the home
• RE450 is PCMag's Editors Choice Winner. Operating Temperature: 0°C~30°C (32°F~86°F)
• TP-Link is the World's #1 provider of consumer Wi Fi for 7 consecutive years according to IDC Q2 2018 report
• All Wi-Fi extenders are designed to increase or improve Wi-Fi coverage, not to directly increase speed. In some cases improving signal reliability can affect overall throughput
• If you experience any trouble during or after set up, please contact us. TP-Link offers a 2 year warranty and Free 24/7 technical support

User questions & answers

Question:	can i put different password aside from the main router password? so only me can use my extender
Answer:	I would like to give you some personal advice. Do not buy any type of Netgear extender. They do not work at all. What you need to do is get a expensive router that is the best thing for your Wi-Fi system. Amazon can supply you with that. Or go to Best Buy and test it out. Trust me extenders do not work. You’re throwing your money away.
Question:	Does it need to be plugged in near the router
Answer:	Try using the extender's IP address - just enter 192.168.1.250 in the browser window, while the unit is powered and in close proximity to your router, which should be powered also, of course !
Question:	Is it dual voltage 110v/220v?I need an accurate answer
Answer:	The wifi range extender gets really warm when its plugged in. I personally keep it out of sunlight areas to avoid overheating Hope this helps
Question:	Does this create a new ssid that is different than the main network ssid
Answer:	This device has been designed to integrate with virtually any router - as for coverage, your square footage is paramount, i.e., beyond 1200 sq ft, your extension will be negligible. Hint: 1200 sq ft is nearly a 35 x 35 square !

Product features

Enjoy Blazing-Fast AC1750 Wi-Fi Anywhere

Eliminate dead spots in rooms with weak Wi-Fi coverage with the RE450. Its three powerful antennas deliver rapid, blazing-fast dual band AC1750 Wi-Fi across your home for 4K streaming and gaming in any room.

Easy to install and move, the range extender enables you to expand your Wi-Fi and connect any wired device, such as your Xbox, PlayStation, PC or Mac, to powerful Wi-Fi with the available Gigabit Ethernet port for boosted speed and performance.

AC1750 Wi-Fi for Amazing Performance

With Wireless AC technology, the RE450 creates stronger, blazing-fast connections in rooms with weak Wi-Fi. Three powerful antennas send AC1750 Wi-Fi coverage across your home. Ideal for AC1750 routers and above.

Take advantage of the extender’s exceptional AC1750 speeds to keep up with the demands of simultaneous online gaming and 4K streaming.

Signal Light and RE Button for Easy Setup

The Intelligent Signal Indicator light helps you quickly find the best location to place the RE450, and the range extender’s RE button allows for one-touch setup.

Both features make it easy to connect the RE450 to your existing wireless network in minutes.

Gigabit Ethernet Port for Access Point Capability

The Gigabit Ethernet port on the RE450 delivers high-speed wireless connectivity directly to your favorite wired devices.

Access Point mode allows you to directly connect an RE450 range extender to the Ethernet port of any room in your home to act as a Wi-Fi hotspot. Hardwire your home to provide strengthened AC1750 Wi-Fi to any room.

Universal Compatibility

RE450 range extenders are compatible with any router or access point, making it easy to expand and strengthen your network, even as it changes over time.

Intuitive Mobile Interface

Set up and manage your Wi-Fi through the TP-Link Tether app, available for both Android and iOS. Tether’s simple layout lets you quickly access Wi-Fi settings such as guest privileges, scheduling and device management right from your smartphone.

World’s #1 Consumer Wi-Fi Brand*

Nearly half the people in the world who use Wi-Fi networking products from TP-Link. With over 150,000 products shipped daily, substantial investment in research and development, and meticulous in-house design, manufacturing and testing, we’re proud to be one of the world leaders in Wi-Fi.

*According to latest published IDC Worldwide Quarterly WLAN Tracker Report, Q3 2016 Final Release.

Product description

The pocket-sized TL-WR802N creates a private Wi-Fi hotspot anywhere an Internet connection is available. Powered via a wall outlet or USB port, the travel router works with 2.4GHz devices, including Chrome cast and reaches speeds of 300Mbps for streaming video, placing Internet calls, and gaming online without lag. Frequency Range: 2.4-2.4835GHz; Interface Available: 1 x 10/100Mbps WAN/LAN Port, 1 Micro USB Port, 1 Reset Button; System Requirement: Microsoft Windows 98SE NT 2000 XP Vista, or Windows 10/8.1/8/7, MACOS NetWare UNIX or Linux; Wireless Standards: IEEE 802.11n IEEE 802.11g IEEE 802.11b.

• Pocket sized Wireless N router Travels effortlessly
• Quickly create a secure Wi Fi hotspot to Share with family and friends; External Power Supply 5V/1A
• 300 Mbps Wi Fi speed on 2.4G hertz band for lag Free video streaming and online gaming
• Compatible with Chrome cast
• Micro USB port for Powering via an external adapter or USB port
• Suppots Router, AP, Client, Repeater and WISP operation modes
• Pre Encryption function sets initial SSID and password Protection. Antenna Type:On-Board

Product features

Goes Where You Go

Incredibly compact router that easily fits in your pocket, purse or bag, perfect for use at home and while traveling.

Works with 2.4GHz devices, including Chromecast and Amazon Fire TV Stick so you can easily stream video wherever you are.

Micro-USB port for flexible powering via an external adapter or USB cable

Easily Share Fast Wi-Fi

Quickly create a secure Wi-Fi hotspot to share with family and friends, whether you’re in a hotel room or in a study group.

Get up to 300Mbps Wi-Fi speed for taking care of your essentials, or streaming HD Video.

Supports Access Point, Client, Router, Repeater, and Bridge modes.

What’s in the Box

Nano Router, Power adapter, USB cable, Ethernet cable, installation guide, resource CD

Advanced Security

Keeps your network safe with advanced security encryption

802.11 b/g/n Compatible

Works with any 802.11b/g/n Wi-Fi router or access point

Industry-leading Support

Industry-leading 24/7 free technical support by phone (1-866-225-8139) and email

Product description

Ingenious Entomb EnStation5-AC enhanced Outdoor 11ac Wave 2, Wireless AC867 Client Bridge/AP delivers high bandwidth over extended distances with reduced interference for point-to- point or point-to- multipoint connectivity. Powerful onboard quad-core processors combine with new 11ac technology to maximize speed and support greater device capacity and connection reliability. EnStation5-AC delivers next generation, business-class Wi-Fi at exceptional pricing. EnStation5-AC extends the wireless network across large campuses, over vast acreage in parks and recreational facilities, parking lots, city blocks, and industrial, farming and ranching properties; in sizeable indoor structures like arenas, shopping malls, warehouses and convention centers and in other challenging settings. EnWiFi app - Simple, Intuitive interface for AP configuring & monitoring & management

• High-Gain 19 dB Directional Antenna Extend Wireless Networks Up to 5 Miles Point-to-Point
• Quad-Core CPU, 4x ARM Cortex A7 Processor, 717 MHz "Turbo Engine"
• 11ac Wave 2 Wireless Speeds to 867 Mbps on 5 GHz
• Up to 30% Faster Throughput Over 11ac Wave 1 3x3 APs
• Optimal Bandwidth Supports Rich Application Delivery Over Long Distances

User questions & answers

Question:	Can it do bridge and ap mode at the same time to cover a 300' area. trying to bridge a building 250' away and cover the area with ap mode same time
Answer:	Thank you for your interest! These fit most caster boards. Have a great day!
Question:	I want to extend my wifi 200feet away in a seperate building. Do I use 2 similar antennas
Answer:	Width? If you don't mean the diameter (8.5 cm), then it's just about 2.4 cm. The bearing bore is indeed 8 mm.
Question:	what does it come with
Answer:	Thank you for your interest! These wheels use the standard size 608zz bearing, so they should fit!
Question:	Does this do wds bridging
Answer:	Thank you for your interest! These are standard size 608 bearings. 608 bearings have an 8mm inner diameter, a 22mm outer diameter, and a width of 7mm. Have a great day!

Product features

EnGenius 802.11ac 5 GHz Extreme Long-Range Outdoor Wireless Access Point/Client Bridge

EnGenius EnJet™ EnStation5-AC is a 5 GHz High-Powered, Long-Distance 11AC Wave 2 Wireless Outdoor AP/Client Bridge offering dual-PoE Gigabit ports and a high-gain directional antenna that emits a narrow signal beam for limited interference ensuring stable connectivity, high-bandwidth and 867 Mbps speeds over extremely long distances, extending the network up to 5 miles point-to-point.

Superior Outdoor Wi-Fi

EnStation5-AC features ‘Time Division Multiple Access’ technology that cuts through RF-congested environments within Point-to-Point/MultiPoint applications. With EnJet enabled the EnStation5-AC gives every station a specific time slot to transmit on, thus the station will transmit whether or not another system is transmitting. EnJet EnStation5-AC assigns time slots to each station, providing faster and more stable performance and avoids hidden node issues.

Strong Wireless Performance over Broad Distances

Robust point-to-point and point-to-multipoint 802.11AC wireless performance of up to 867 Mbps on the 5 GHz frequency band, and 400 Mbps at ½ mile, creates a dependable network across great distances. EnStation5-AC features 26 dBm output power and high receive sensitivity, coupled with embedded high-gain directional antennas that emit a narrow signal beam to deliver stable robust connectivity.

Point-to-Point and Point-to-Multipoint Deployments

Ideal for Point-to-Point applications that need to reach short or long distances where Ethernet or even Fiber cabling is not possible or practical. Longer ranges can be achieved when paired with another EnStation5-AC in a Point-to-Point deployment by aligning their dish-shaped antennas to face each other ensuring each gets the full impact of the narrow-focused, wireless beam, helping to reduce frequency interference over long distances — up to 5 miles away.

Extreme Distances Even in Extreme Weather

EnStation5-AC is designed to perform, even in harsh environments. Its IP55-rated waterproof and dustproof casing ensures it can withstand harsh outdoor climates and indoor industrial environments. This includes prolonged exposure outdoors to sunlight, extreme cold, frost, snow, rain, hail, heat and humidity, and indoors where temperature may be a factor.

Connect and Power A Second Network Device for Greater Deploy

EnStation5-AC’s secondary Gigabit port connects an additional PoE-compatible device like a remote IP surveillance camera or AP for greater deployment flexibility and convenience.

Optimized Maximum Airtime Efficiency

By dividing a signal into different time slots & assigning them, the EnJet system provides steady maximum throughput & high link reliability to every client—even when bandwidth demands increase & devices are added.

Avoids Hidden Node Issues

No more collisions and interferences caused by devices that can’t “see” each other on a channel & transmit simultanously.

Steady, Uninterrupted Streaming

EnJet provides steady maximum throughput over long distances. Ideal for Video & Voice transmission for strong, uninterrupted streaming with low latency.

Retain Stable Performance

With EnJet you can keep the total throughput consistently high while even when the number of wireless stations increase in your outdoor network deployment.

Long-range wireless point-to-point surveillance networks

Connect an EnGenius IP Surveillance Camera to EnStation5-AC’s secondary Gigabit port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of EnGenius IP Cameras to the EnStation5-AC gives you 'eyes on' places you might not otherwise see.

Grounded Power-over-Ethernet Extends Power to Unwired Areas

The 802.3at PoE-compliant port and included compact PoE adapter extends power where outlets are scarce or unavailable, such as under the eaves of roofs, high atop light poles or in ceiling rafters up to 328 ft.

Position for Maximum Connectivity

A 360-degree, 3-axis pivoting arm locks in place for precise alignment with a matching EnStation5-AC unit in point-to-point scenarios. EnStation5-AC is easily mounted to a variety of surfaces or poles with the included mounting kits

Convenient

Included passive 54v Gigabit PoE Adapter features disconnect, short-circuit and surge protection, protecting valuable network equipment from power surges or short-circuits associated with lightning strikes and electrostatic discharge (ESD).

• 【1200Mbps Stable Signal】With dual band technology, this 5GHz and 2.4GHz dual-band WIFI range extender can be used in conjunction with any standard Wi-Fi router, and runs under dual-band, It offers up to 300Mbps for 2.4GHz and 867Mbps for 5GHz. Totally up to 1200Mbps is available for your use, maximizing reduces the loss of data transmission.
• 【4 Antennas-strong penetrating power】The wifi extender is equipped with 4 high-gain antennas. The dual-band extender and dual-band router can be used together, which can give full play to the high performance of the two-frequency band! 360-degree high-speed connection and coverage, extending dual-frequency signal coverage to every corner of the home!
• 【Compatible with Most Routers】This WIFI Range Extender has been tested to be compatible with 99% of the routers on the market and can be used with any standard router or gateway. Supports expansion to any device, such as Windows Vista/XP/2000/7/8/10, Linux, MAC OS, etc. Ideal for HD streaming & gaming experience.
• 【Easy Setup and Secure Network Access】By pressing the WPS button on the wifi enhancer, you can start the extender in working mode within 3 seconds. Smart signal indicators can help you find the best location for Wi-Fi coverage. Support WPA / WPA-PSK, WPA2 / WPA2-PSK security mechanisms to protect important data and avoid Wi-Fi interference and privacy issues.
• 【Excellent Tech Support】We provide 7x24h technical support. Besides, One-year warranty & Free replacement service are also available. If you need any service support please feel free to contact us via the email on the product description.

User questions & answers

Question:	Does this allow to connect to a xfinity public WiFi that has a captive portal (username/password) for access
Answer:	No, I don't think so. Razor makes smaller ones for younger kids.
Question:	If I use it as an extender, can I use both ethernet ports at the bottom to connect 2 different devices
Answer:	I asked my daughter, because I was unaware of what that meant, she said yes. She loves it.

Product features

Enjoy Blueshadow-Fast AC1200 WiFi Anywhere

With Wireless AC technology, the Blueshadow Range Extender creates stronger, blazing-fast connections in rooms with weak Wi-Fi. Four powerful antennas send AC1200 Wi-Fi coverage across your home. Ideal for AC1200 routers and above.

Long Range AC1200 WiFi

Stream HD movies, play video games, download large files and more with long range AC 1200 WiFi. Dual 2.4 GHz and 5 GHz WiFi bands connect more devices at AC 1200 speeds.

2 100Mbps Gigabit Ethernet Port

2*100Mbps Ethernet Port allows to directly connect an WiFi range extender to the devices in home to act as a Wi-Fi hotspot. Hardwire your home to provide strengthened AC1200 WiFi to any room.

Universally Compatible

Blueshadow range extender is compatible with any router or access point, making it easy to expand and strengthen your network, even as it changes over time.

• Boost superior Wi-Fi coverage: Prescitech X12 Wi-Fi extender boosts your existing Wi-Fi coverage throughout your home, extend wireless network to hard-to-reach areas. Eliminating dead zones and buffering. Compatible with Alexa devices, etc.
• Stronger and farther-reaching: 4 high-powered antennas have sensitivity ability, send the x12's Wi-Fi much farther even outdoor from more stable and stronger wireless connections, lets you enjoy Blazing-fast Wi-Fi connections wherever you want.
• More connections for more devices: simultaneous AC1200 Dual band signals speed up to 900Mbps on 5GHz + 300Mbps on 2.4GHz for the ideal online gaming and streaming experience, allows all devices to connect network at the same time without interruption.
• Simplify setup: quickly expand wireless coverage at a push (WPS button); or browser-based setup, log in page auto popup not need to input Long IP, even you are not a tech-savvy. Smart Indicator helps to find the best location for optimal Wi-Fi coverage.
• Connect wired device: Ethernet port connects a wired device to your network at incredible speeds; access point mode easily turn your wired internet connection into dual band Wi-Fi network. Works with any standard router or gateway

User questions & answers

Question:	El menú de configuración me sale en idioma chino como puedo configurarlo en ingles
Answer:	Es muy bueno, me funciona perfecto , gracias
Question:	I only have wifi on my phone. will a wifi extender help with tv signals
Answer:	Definitely
Question:	Set it up, and it shows it self as its own network, separate from my home wifi network...is this correct
Answer:	Yes. You have to login to gui. Then set it up to hook up to your current network.
Question:	I set up via wpn. power wps light are blue but the status is not. devices states its connected but the devices doesn’t connect. please help
Answer:	I would say turn off by button..then unplug..then turn back on n re plug in n check the router ur connecting to

Product features

Enjoy Powerful AC1200 WiFi Anywhere

The Prescitech X12 is a universal high power AC1200 dual band range extender, designed to conveniently extend your existing Wi-Fi coverage, creates stronger and farther-reaching dual band connections in hard-to-reach areas, allowing you enjoy blazing-fast wireless coverage throughout all your home and garden.

Compatible with Alexa, ideal for extending Wi-Fi to smart home and Alexa devices. Updated interface simplify setup. Compact and bold look decor your home when improve and extend Wi-Fi where you need.

Boost Wi-Fi Throughout Whole Home

With 802.11 AC wireless technology, the Prescitech X12 internet booster send high powered WiFi across your home to eliminate Wi-Fi dead zone and buffering, creates stronger, ultra-fast connections for seamless gaming and 4K streaming in any rooms.

Stronger, Farther-Reaching Wi-Fi Signal

Four flexible high-powered external antennas for amazing performance, delivering WiFi up to 1200Mbps, send the X12’s Wi-Fi much farther and boost its signal coverage throughout large homes, even garden and backyards from more stable and stronger wireless connections.

Extend Wi-Fi Hotspot

Public Wi-Fi hotspots from Starbuck, KFC, McDonald‘s, hotel, even in rv's at campgrounds and parks can be extended, also works for the 3G/4G mobile hotspot, ideal for outdoor travel enthusiasts.

Boost Wi-Fi Throughout Whole Home

With 802.11 AC wireless technology, the Prescitech X12 internet booster send high powered WiFi across your home to eliminate Wi-Fi dead zone and buffering, creates stronger, ultra-fast connections for seamless gaming and 4K streaming in any rooms.

Stronger, Farther-Reaching Wi-Fi Signal

Four flexible high-powered external antennas for amazing performance, delivering WiFi up to 1200Mbps, send the X12’s Wi-Fi much farther and boost its signal coverage throughout large homes, even garden and backyards from more stable and stronger wireless connections.

Extend Wi-Fi Hotspot

Public Wi-Fi hotspots from Starbuck, KFC, McDonald‘s, hotel, even in rv's at campgrounds and parks can be extended, also works for the 3G/4G mobile hotspot, ideal for outdoor travel enthusiasts.

Product description

The NETGEAR AC Wi-Fi Business Access Point WAC510 delivers high performance with high client density for enterprises requiring ubiquitous and reliable wireless for all business applications. The WAC510 is managed by NETGEAR Insight app, for a more intuitive and innovative support, with no need for extra management hardware. The WAC510 features Multi-User MIMO (MU-MIMO) to achieve aggregate speeds up to 1.2 Gbps, option to configure as NAT or Access Point modes, and comes with two Ethernet ports, including a Power-over-Ethernet (PoE) 1Gb port. WAC510 comes with lifetime limited warranty, and 24/7 support including lifetime chat.

• MULTIPLE DEVICE PERFORMANCE: Dual-Band AC1300 speed, coupled with MU-MIMO technology, supports up to 200 client devices.
• WIRED ETHERNET PORT: Plug in a printer, storage, or other nearby wired devices into the extra 1 Gigabit port for maximum speed.
• PoE or AC POWERED: Simplified deployment with PoE, or power using the optional PAV12V power adapter (sold separately).
• LOCAL AND REMOTE MANAGEMENT: Includes 1 year free insight subscription for remote management from anywhere, and no additional hardware or cloud key required. Setup, configure, and manage with the Insight app.
• FLEXIBLE MOUNTING: Easy to securely install on the wall or a suspended ceiling with included hardware.
• BUSINESS CLASS SECURITY: Supports WPA, WPA2, and rogue AP detection.
• ADVANCED TECHNOLOGY: Supports load balancing, band steering, and assisted roaming.

User questions & answers

Question:	Can wac540 work with poe of gc110p switch
Answer:	I can not say with a specific model. As long as it is true POE with sufficient output per port then it should. I use mine with a BV Tech 8 port POE switch that has 130W Max Power (up to 30W per port) and this works perfectly with the POE line extended 100 ft per line.
Question:	Can it work as an extender of wnd930 ap
Answer:	I don't know the precise definition of "extender", but I know that you can set up two WAC5xx units in bridge mode, with one connected to the wired network and one freestanding, to "extend" your network. If there is a bridge mode option on the wnd930 ap, it may be compatible.
Question:	So if one wanted a single ethernet port for a hard wired device, would the lan2 plug work? or do i need a separate router outside of this
Answer:	Yes, the second port can be used to connect to another device. I have a cat8 Ethernet cable coming from the second port to a 1 gb switch and have three other computers connected to that switch and the throughput is 1000mbs just as it is from the switch that this access point is connected to. No speed loss. My cable from switch that has xfinity internet up to the Netgear access point is cat7 heavy duty outdoor. I have had no issues or drops in speed.
Question:	How do they comapre to uibiqiti unifi uap-ac-pros or uap-ac-lites
Answer:	WAC510 has better rateVsrange than uap-ac-lite and uap-ac-lr. WAC540 is a 4x4 and is better than uap-ac-pro.

Product features

Power to Match Your Workplace

Easy to power via PoE or with PAV12V AC adapters sold separately.

Flexible Mounting Options

Easy installation on a wall or a suspended ceiling. Attaches securely to the ceiling t-bar, not an unsecured loose tile. Mounting hardware included.

Optimize Your Access Points Automatically with NETGEAR Instant WiFi

Instant WiFi continuously optimizes power and traffic across all channels and bands, minimizing interference and maximizing performance for everyone on your network.