12 best powerline internet adapter
Powerline internet adapters are networking devices that use a building's electrical wiring to transmit data signals. Here's a breakdown of key information related to powerline network adapters:
Technology Overview:
- Powerline network adapters leverage the existing electrical wiring in a building to create a network connection.
- They typically come in pairs: one adapter is connected to the router and plugged into a power outlet, and the other is placed in a different room to provide an Ethernet connection.
How It Works:
- The adapters use a technology known as Powerline Communication (PLC) to send data signals over the electrical wiring.
- Data is modulated into electrical signals and transmitted through the power lines, and the receiving adapter demodulates the signals back into data.
Installation:
- Setting up powerline adapters is generally straightforward. Plug one adapter into an electrical outlet near the router and connect it to the router using an Ethernet cable. The other adapter is plugged into an outlet in the room where you need a network connection.
Ethernet Ports:
- Powerline adapters typically have one or more Ethernet ports to connect wired devices, such as computers, gaming consoles, or smart TVs.
Speed and Performance:
- The performance of powerline adapters can vary based on factors like the quality of the electrical wiring, distance between adapters, and interference from other electrical devices.
- They offer a more stable connection compared to Wi-Fi in some cases but might not achieve the same speeds as a direct Ethernet connection.
Security:
- Powerline adapters often come with built-in security features to protect the transmitted data.
- Some models support encryption methods to secure the communication between the adapters.
Compatibility:
- Powerline adapters are generally compatible with standard electrical systems found in homes and offices.
- Some advanced models may support additional features like Multiple Input Multiple Output (MIMO) technology for improved performance.
Use Cases:
- Powerline adapters are commonly used in situations where running Ethernet cables is impractical or challenging, and Wi-Fi signals may be unreliable.
- They are particularly useful for extending network connectivity to rooms with weak Wi-Fi signals.
Limitations:
- The performance of powerline adapters can be affected by the quality and age of the electrical wiring in a building.
- Interference from other electronic devices on the same electrical circuit can impact performance.
When considering a powerline internet adapter, it's essential to assess the specific requirements of your network setup and the conditions of your electrical wiring. Reading product reviews and checking compatibility with your devices can also be helpful in making an informed decision.
Below you can find our editor's choice of the best powerline internet adapter on the marketProduct description
Using advanced Home Plug AV technology, TL-PA4010 KIT provides users with stable, high-speed data transfer rates of up to 600Mbps on a line length of up to 300 meters. With speed of up to 600Mbps, TL-PA4010 KIT enables heavy-bandwidth applications like HD streaming, on-line gaming and large file downloading, turning your home into a robust and high-speed networking.
The terms “AV600” and “600Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV600” or “600Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues. For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product.
About power saving, actual power saved varies based on network conditions and environmental factors.
- Fast speed: Wired connection with high speed data transfer rate, ideal for HD video or 3D video streaming and online gaming, up to 100Mbps
- Plug and Play: No new wires and no configuration required; Step1: connect one adapter to your router. Step2: plug in another powerline adapter wherever you need wired internet service
- Network expansion: The TL-PA4010 KIT transforms your home’s existing electrical circuit into a high-speed network with no need for new wires or drilling and brings wired network to anywhere there is a power outlet(Up to 300 meters)
- Miniature design: Smaller than most powerline adapters in the market, blends discreetly in front of any power outlet
- Power Saving Mode: TL-PA4010 KIT automatically switches from its "Working" mode to efficient "Power-Saving" mode when not in use, reducing energy consumption by up to 85%
- Please note that the Powerline Adapters need to be on the same circuit(not necessary to be in one room). Powerline adapters must be deployed in sets of two or more
- Compatible with all TP-Link Powerline Ethernet Adapters AV2000, AV1300, AV1200, AV1000, AV600, AV500, AV200. Please purchase TL-WPA4220 or TL-WPA4220KIT if you need Wi-Fi Powerline Adapters
- Industry leading Manufacture's 2 year Warranty and Free 24/7 technical Support
User questions & answers
Question: | Has anyone tried this setup with an extra wireless router at the end |
Answer: | Yes. I have a Linsys N on mine. You have to disable the DHCP on the slave router. Also you need to assign a static IP on the router. Use something like 192.168.1.250. Then only plug into the ports with the line from the wall unit and not into the internet/supply port. If you have a 4 port router with 1 internet port, you have to use one of the ports for the service so you can hook up 3 other direct connects. You then have to rename the wireless on the "slave" router to exactly match any other wireless providing service same with password. You need to make it a duplicate router. Good luck |
Question: | How secure this is? I assume it is not just limited to your house's internal circuit. Could it be accessed from outside the internal house circuit |
Answer: | These systems are hackable, but it takes a lot of work by a good hacker. Here's an excellent treatise on this subject: bentasker dot co dot uk/documentation/security/282-infiltrating-a-network-via-powerline-homeplugav-adapters As this treatise says at the end, TP-Link has released a firmware update to fix this issue, and that new items leaving the factory would not be affected. Users with affected devices can download the firmware update from tp-link dot com/en/. |
Question: | Can you add additional powerline devices to network |
Answer: | Of course you can but remember the speed its divided in the number of devices conected. your maximin badwith will allways be 500 mbps in the powerline network |
Question: | So this is a wifi repeater and it turns your electrical system into ethernet cable too |
Answer: | The TL-WPA4220 KIT allows you to expand your home's Ethernet connectivity using the existing electrical wiring within your walls, while also providing Wi-Fi signal broadcast at the Powerline Wi-Fi Adapter (TL-WPA4220) location. Simply plug the TL-PA4010 (smaller unit) into a wall outlet near your router and connect it to the router via Ethernet, then plug the TL-WPA4220 unit into a wall outlet at the desired location. Regards, TP-Link Support |
Product features
Quickly Expand Your Home Network
Comes in a set of two adapters to quickly and easily expand your home’s Ethernet through your power outlets and into hard to reach areas using HomePlug AV technology.
To set up, plug one adapter into a nearby outlet and connect it to your router using the included Ethernet cable.
Then, take the second adapter and plug it in and connect it to any device, also using an Ethernet cable. Your powerline adapters should automatically detect and establish a strong AV600 connection.
Better Connectivity Across Your Home
· Expand your network with AV600* speeds without needing to drill holes or add wires.
· Give a wired device a secure and reliable Internet connection in any room.
· Compact design lets it fit in with home decor and sit on outlets without blocking wall outlets.
· Quality of Service protocols constantly monitors wireless transmission for a more efficient network.
. The terms 'AV600' and '600Mbps' are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other 'AV600' or '600Mbps' PowerLine devices. Actual data speeds vary and are limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product.
Ethernet Port
Connect a wired device, such as a game console or smart TV, to a stable connection.
Advanced Security
Pressing the Pair button enables greater network security and data protection with one-touch 128-bit AES encryption.
Power Saving Mode
Each adapter considerably reduces energy consumption when not in use.
22+ Years of Experience
Our world class R&D team, streamlined vertical manufacturing and strict quality control have enabled us to consistently create exceptional high-quality products for the last 22 years.
Product description
TL-PA7017 KIT uses HomePlug AV2 technology to extend your wired internet. With Gigabit Ethernet port, it ensures high speed wired connection, providing data transmissions of up to 10000Mbps and allowing smooth transmission of Ultra HD video streaming
This makes the TL-PA7017 KIT the perfect home entertainment companion.
Power line products in general, transmit data through the power line of your house. The power line rate is mainly decided by the quality of power line environment it’s operating in. When your power line rate is low, you may try the steps below to improve the quality of service.
Step 1:
Please check whether your powerline adapters are plugged directly into a wall outlet. If not, please move the adapters to an outlet on the wall.
Step 2:
Please check if there are electrical devices, which have a motor inside them, around the powerline adapters. Such equipment can be air-conditioners, washing-machines, electric-fans etc.. Please move such equipment to another location if possible, or move powerline adapters away from such equipment. You may also buy a surge protector and plug such equipments to its outlets to avoid any interference they may cause.
Step 3:
Please check if there are AC power adapters, such as those used for mobile phones, laptops or something else around the adapters. If the quality of AC power adapter is not good, it may cause noise on the power line circuit. Please move it to another place away from the powerline adapters.
Step 4:
Please check if the distance between the adapters is too long. In theory, the maximum distance is 300 meters. However, with interference and line quality, it will be hard to reach the full 300 meters.
- HomePlug AV2 Standard - high-speed data transfer rates of up to 1000 Mbps, supporting all your online needs
- Gigabit port - provides secure wired networks for desktops, smart TVs or games consoles
- Plug and play - allows setup of your powerline network in minutes, so you can enjoy fast wired connections right away
- Patented Power - Saving Mode - automatically reduces power consumption by up to 85%
- No new wires and no configuration required; Compatible with all TP-Link AV2000, AV1300, AV1200, AV1000, AV600, AV500 & AV200 PowerPoint adapters.
- Make sure all powerline devices are on the same electrical circuit.
- Kindly Reminder: TL-PA7017 KIT can only provide wired connections. No WiFi.
- Industry leading support: 2-year warranty and free 24/7 technical support.
User questions & answers
Question: | The description says "No new wires". So does this unit come with an ethernet cable to connect to the router |
Answer: | Yes, the TL-PA7017 Kit comes with two Ethernet cables. |
Question: | does this device collect and store my browser history |
Answer: | I doubt it. However, there is a tpPLC utility that provides an interface to the device. If it does store browser history, it probably is just the last site visited. I wouldn't worry that much. |
Question: | How long are the included ethernet cables |
Answer: | The TL-PA7017 Kit comes with two 6.5 ft. (2m) Ethernet cables. |
Question: | Does this block the second plug-in on a standard wall outlet |
Answer: | I my case it does not: I have a table lamp and the AV 1000 both plugged in the same wall outlet |
Product features
What is a Powerline Kit?
Powerline kits turn your home’s electrical wiring into a wired network, moving data right through your walls and floors.
The TL-PA7017 KIT comes with two powerline units that set up in minutes, are simple to use and plug into any power outlet to keep wired connections strong where you need them.
Product description
The TL-PA9020P Powerline Kit equips any room with blazing fast internet by transforming your outlets into Ethernet ports for reliable wired connection to all of your devices, no matter how far from your router.
With 2x2 MIMO, the adapters intelligently transfer data through two streams for maximized speed. The HomePlug AV2 then rapidly transfers your data through the electrical wiring within the walls of your home. Beamforming additionally boosts overall performance by strengthening your signal towards powerline devices. Game on in crisp, clear 4K from any room in your household without staring down a loading screen.
The terms “AV2000” and “2000Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV2000” or “2000Mbps” PowerLine devices. Actual data speeds vary and are limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product." Make sure your computer’s IP address is in the same segment as your router’s.
About power saving, actual power saved varies based on network conditions and environmental factors.
- Power line adapter provides up to 2000Mbps Ethernet over Power; Ideal to be Ethernet extender who can easily go over the walls
- As network adapters Supporting Home Plug AV2, Easy to add Multiple adapters and works under 110 240V; The Best Powering: 'the Best Power line networking kit' the wire cutter
- Gigabit port, give you Full speed of Your internet; Transmission speeds: Ethernet 10/100/1000 Mbps, range 300 meters In house
- Power saving automatically reduces Power consumption by up to 85 percent
- Plug & Play, No new wires and no configuration required; Compatible with all AV2000, AV1300, AV1200, AV1000, AV600, AV500 & AV200 PowerPoint adapters; Modulation technology: off
- Data encryption by 128 bit AES to make the network safe and private
- Industry leading Support: 2 year and Free 24/7 technical Support
User questions & answers
Question: | If your switch/modem is far from the security camera...would the use of a poe injector and a powerline adapter be "in therory" the same as hardwiring |
Answer: | Late response, but No, not equal to hardwiring. You'll have much less bandwidth/speed drop with hardwire. Powerline depends on how far the breakers are and overall system layout. |
Question: | If my router supports mimo and link aggregation, can i plug both ethernet ports into my router to increase bandwidth to the powerline network |
Answer: | No. The device internally uses MIMO between the endpoints to increase speed, and the 2 ports are essentially a switch (i believe the powerline is just another 'switch' leg). But it does not allow you to bind the ports together as a link. Frankly, I 'only' get about 250-350Mbps through the devices even with Gigabit Ethernet connected, so even if it did support it you'd get nowhere NEAR the expected speed increase. |
Question: | Can I add a third device to extend my ethernet to another floor |
Answer: | I have router on 2nd floor, my PC and NAS on the first. The whole idea was to cover house with wifi and not to run the wire to PC and NAS and it works fine. |
Question: | Will these work in a house with no grounds? None of the outlets in my house have a ground wire |
Answer: | They will not fully work in your situation. The MIMO technology, where they talk about having two separate data streams between the devices, requires a ground plug. This is because one of the data streams goes over the actual electrical circuit that is delivering power, and the other over the ground wire. So even if it were to work with one of your adapters for three prong devices, you would be paying more for performance that you will never ever get, since you'd be buying a two stream device and your wiring is incapable of delivering more than one stream. Some of the other TP-Link kits that aren't MIMO (usually advertised as 500-600 mbps), such as the one I have, deliver only one stream and have only two prongs. They are also a lot cheaper. Don't buy this if your wiring doesn't have a ground wire as you are wasting your money. Buy one of the cheaper kits. All of my wiring has ground wires, so I can't say how well the two prong designs will work with your older wiring. But at least you won't be wasting money on something guaranteed to never fully perform. |
Product features
Level Up With Powerline
The TL-PA9020P Powerline Kit equips any room with blazing fast internet by transforming your outlets into Ethernet ports for reliable wired connection to all of your devices, no matter how far from your router.
With 2x2 MIMO, the adapters intelligently transfer data through two streams for maximized speed. The HomePlug AV2 then rapidly transfers your data through the electrical wiring within the walls of your home. Beamforming additionally boosts overall performance by strengthening your signal towards powerline devices. Game on in crisp, clear 4K from any room in your household without staring down a loading screen.
Powerline for Rapid 4K Streaming and Gaming
The TL-PA9020P KIT utilizes HomePlug AV2 and 2x2 MIMO to securely transfer your data through two separate streams at up to 2000Mbps using existing electrical wiring.
Beamforming additionally boosts overall performance by focusing your network signal towards powerline devices to form stronger, more reliable connections. Stream and game in sharp 4K resolution on your smart TV and laptop simultaneously without slowing down your signal speed.
Gigabit Ethernet for Uninterrupted Entertainment
The powerline adapters each include two Gigabit Ethernet ports to provide uninterrupted internet connection to your smart TV, gaming console and laptop.
Equip your network connection with wired reliability and enjoy all of your favorite games, shows and movies without having to deal with the lagging or buffering.
Pass-through with Noise Filtering for Clear Performance
The powerline adapters enable you to reclaim your power outlet space with a conveniently integrated power socket design.
The built-in socket utilizes advanced noise filtering to further increase connection stability. Connect and power a device without compromising network performance.
Quality of Service for Traffic Prioritization
The powerline kit includes Quality of Service (QoS) setup for simplified network traffic control.
Utilize the function to prioritize your Powerline network traffic to the devices that matter most to you.
One-Touch Pairing
Press the included “Pair” button on the Powerline adapters for instant and effortless 128-bit AES encryption. The TL-PA9020P KIT can be set up and secured in seconds with a simple press of a button.
Intelligent Signal Indicator
The powerline features an intelligent signal LED indicator that turns red when your connection is weak and green when your connection is strong. Always know the strength of your signal without having to go through the steps of troubleshooting.
Power Saving Efficiency
When not in use, the powerline automatically powers down to reduce outlet energy consumption . Cut down costs on your energy bill while providing faster connectivity to your devices.
World’s #1 Consumer Wi-Fi Brand*
Nearly half the people in the world who use Wi-Fi networking products use TP-Link. With over 150,000 products shipped daily, substantial investment in research and development, and meticulous in-house design, manufacturing and testing, we’re proud to be the world leader in Wi-Fi.
*According to latest published IDC Worldwide Quarterly WLAN Tracker Report, Q3 2016 Final Release.
Product description
With advanced HomePlug AV technology, the Powerline WiFi extender TL-WPA4220 KIT uses your existing electrical wiring to extend your Internet access to any room in your house. Add Powerline access points throughout your home to create strong, reliable WiFi connections where you need them most. With 2 ports, It's perfect for connecting smart TVs, streaming players and game consoles for HD video streaming and lag-free gaming. It sets up in minutes and Push-and-Secure encrypts the connections with the touch of a button. For best performance, plug them directly to wall outlets in the same electrical circuit, do not plug them on any kind of power strip.
- WiFi powerline adapter provides up to 600Mbps Ethernet over power, up to 300Mbps WiFi. Ideal to be Ethernet extender who can easily go over the walls
- As network adapters supporting HomePlug AV, easy to add multiple adapters and works under 110-240V
- Power saving automatically reduces power consumption by up to 85%
- Wired speeds up to 600Mbps and wireless speeds up to 300Mbps for lag-free HD video streaming and online gaming.Range: 300 Meters over electrical circuit
- Compatible with all AV2000, AV1300, AV1200, AV1000, AV600, AV500 & AV200 powerline adapters
Product features
Expand Your Wired and Wireless Network
Comes in a set of two adapters to quickly and easily expand your home’s Ethernet through your power outlets and into hard to reach areas using HomePlug AV technology.
To set up, plug one adapter into a nearby outlet and connect it to your router using the included Ethernet cable.
Then, take the second adapter and plug it in and connect it to any device, also using an Ethernet cable. Your powerline adapters should automatically detect and establish a strong AV600* connection.
Pressing the Wi-Fi Clone button along with the WPS button on your router will automatically copy the router’s SSID and Password, and establish your extended Wi-Fi network.
*The terms 'AV600' and '600Mbps' are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other 'AV600' or '600Mbps' PowerLine devices. Actual data speeds vary.
Better Connectivity Across Your Home
- Expand your wireless network with speeds up to 300Mbps on a strong 2.4GHz connection.
- Extend wired connections into hard-to-reach areas with AV600 Home Plug connections.
- Give two wired devices a secure and reliable Internet connection in any room.
- Compact design lets it fit in with home decor and plug in without blocking other outlets.
- QoS protocols increase network efficiency by routing the most important traffic first.
Two Ethernet Ports
Connect up to two wired devices, such as a game consoles or smart TVs, to a stable connection.
Advanced Security
Pressing the Pair button enables greater network security and data protection with one-touch 128-bit AES encryption.
Power Saving Mode
Each adapter reduces energy consumption when not in use.
Free Support
We believe support should be free, so our team is available 24/7 to provide no-cost technical service, including setup assistance.
Product description
The Powerline 2000 + extra outlet extends your Internet access to any room over existing electrical wiring. It’s perfect for connecting Smart TVs, streaming players & game consoles and ideal for 4K HD video streaming & lag-free gaming. It sets up in minutes with the push of a button.
- Use your existing electrical wiring to extend your Internet access to any room in your house.
- Homeplug AV2 technology supports Gigabit speeds through your electrical outlets for improved coverage
- Extremely fast Powerline adapter for Gigabit speeds, perfect for connecting smart TVs, streaming players & game consoles with 4K HD streaming and lag-free gaming
- Extra plug with our noise filtered power outlet built into the adapter to ensure the performance
- Multiple data streams (MIMO) with Beamforming technology to offer improved coverage by directing the signal where you need it
- Connect multiple adapters to expand your network coverage. System requirements: Ethernet: RJ-45 Ethernet ports,
- Plug and Play - Set up in minutes, no need to configure or install software
- Input power: 100V - 240V, 50/60 Hz. Extremely fast speed up to 2000Mbps
User questions & answers
Question: | If I buy two of these kits will I have 1 sender and three receivers or 2 pairs |
Answer: | Keep in mind, the video on a product page misleads customers! You can't buy WiFi PL extender PLW1010 as they say in Video. If you buy two kits, you'll have - one powerline LAN distributor (non-wifi) - two WiFi extenders (each: PL receiver + Wifi broadcasting + 1 Ethernet Port) - one powerline receiver (non-wifi) you can plug to the power outlet and use as single Ethernet port |
Question: | Can someone tell me what this does |
Answer: | Depends on which version you refer to. The PLW1010 has WiFi capability, the PL1010 does not. They both have an ethernet port. The base unit is located near your router - use ethernet to connect the base unit to your router to get the best throughput from your router and into the house wiring. Plug it into an Electrical outlet and it sends your LAN signal through your house wiring to be picked up by the remote unit(s) plugged into wiring elsewhere in the house. The remote unit has an Ethernet port, so you can attach a Smart TV, BluRay, Game Console, whatever, to the ethernet and get pretty good network response (probably not gigabit, but pretty good anyway). With the Wifi Version (the PLW1010) the remote unit ALSO transmits WiFi signal. I have not purchased this WiFi product yet, I have a ethernet only version right now and looking at this to expand my iPhone/tablet Wifi signal in remote parts of the house). As such, I have an older house and the electrical wiring is sketchy and is rather noisy and fluctuates, but this technology seems to work nonetheless even on the other side of the house, I even have had the base unit plugged into an extension cord and it still works. So bottom line, this will extend your LAN signal to another room of the house via ethernet, and the WiFi version also creates a WiFi Access Point in that remote room. From what others say here, that Wifi is an extension of your router WiFi in SSID/pw. I hope this answers your question. |
Question: | Does this come with 2 units |
Answer: | Comes with 2 units. I was able to get a POE switch to work as well (get an unmanaged one for less complicated setup), and I added in multiple POE Cameras to it. Works great! |
Question: | Do you end up with a new network name or does it mirror your existing wi fi network (so you don't have to have devices switch networks |
Answer: | Most of the answers here are giving you bits and pieces. Here's the scoop from a long time network engineer and administrator. (BTW, I'm here because I'm buying another one for another client.) 1. The wired devices in this listing act as if you had a long Ethernet cable. It's transparent. Its a work of art. Much better than any mesh system 2. As far as the wireless, there are two options - The thing to remember is most devices (computers phones, tablets are fairly single minded when it comes to finding a better signal so if they can see the current access point at all they will hang on for dear life. You can turn off the wifi on the device and turn it back on and that will help it to reanalyze the situation. Business systems which have many of these monitor where devices are and will automatically kick a device off of one, forcing it to reanalyze the situation. a. Use the default setup - some people like this because then they can tell which antenna (access point) their device is connected. b. Duplicate the existing wifi network - This can be done using the WPS setup or manually. I like doing it manually so I can configure the whole setup (channel, channel width, security level, etc.) For the most part the handoff should work seamlessly however there may be times where certain devices (usually older ones) will refuse to change or take a while to make the switch. For most of my clients when I have to setup one of these, I duplicate the existing network to make it easier on them. I have yet to hear of any complaints. Two more details. For best performance of any of these devices 1. It MUST be plugged into the wall outlet, no power taps or surge protectors. They have filters which choke the communication 2. These normally wont work across a meter - in other words, you probably cant use it to share internet with your next door neighbor. There are a few instances where it works but they are few. |
Product features
Next Generation Powerline
Extremely fast speed - up to 2000Mbps.
Reliable Network
Connect multiple adapters to expand your wired network reliably.
Latest Technology
Multiple data streams (MIMO) offer improved coverage and speed.
Plug-and-play
Set up in minutes, no need to configure or install software.
Noise-filtered Power Outlet
Provides an extra outlet and improves the overall Powerline network performance.
Push-and-Secure
Encrypts Powerline network connections with the touch of a button.
Product description
The Powerline TL-WPA7510KIT extends your WiFi network at 1 Gbps speeds with Homeplug AV2. It's perfect for connecting smart TVs, streaming players and game consoles for HD video streaming and lag-free gaming.Plug, Pair and Play - Set up your powerline network and start enjoying fast, seamless wired/wireless connection in minutes.
The terms “AV1000” and “1000Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV1000” or “1000Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues. For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product.
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions.
Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of
1) environmental factors, including building materials, physical objects and obstacles,
2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and
3) client limitations, including rated performance, location, connection quality, and client condition.
About power saving, actual power saved varies based on network conditions and environmental factors.
- Wi fi Powerline adapter provides up to 1000Mbps Ethernet over Power, up to dual band 750mbps(300mbps 2.4Ghz+433mbps 5GHz) Wi Fi ideal to be Ethernet extender who can easily go over the walls
- As network adapters Supporting Home Plug AV2, Easy to add Multiple adapters and works under 110 240V
- Gigabit port, give you Full speed of Your internet
- Power saving automatically reduces Power consumption by up to 85 percent
- Plug & Play, No new wires and no configuration required
- Data encryption by 128 bit AES to make the network safe and private
- Compatible with all AV2000, AV1300, AV1200, Av1000, AV600, AV500, AV200 PowerPoint adapters
- Industry leading Support: 2 Year Warranty and Free 24/7 technical Support
Product features
Faster Speeds in Any Room
Enjoy gaming and streaming across your home with fast AC750 Wi-Fi and reliable Gigabit Ethernet of the TL-WPA7510 KIT. The kit comes with two powerline units that turn your home’s electrical wiring into a wired network, moving data right through your walls and floors. The powerline kit sets up in minutes, is simple to use and plugs into any power outlet to keep wired and Wi-Fi connections strong where you need them.
Extend Your Network Anywhere
Using HomePlug AV2 technology, the TL-WPA7510 KIT delivers a high-speed network connection to any room with a power outlet.
Better Connections with AC Wi-Fi
With dual 2.4 GHz (300 Mbps) and 5 GHz (433 Mbps) bands, you get more Wi-Fi to keep all your devices connected at top speeds.
Rock-Solid Performance with Gigabit Ethernet
A Gigabit Ethernet port lets you directly connect wired devices like smart TVs, gaming consoles and PCs for reliable performance at higher speeds.
Set Up and Running in Minutes
To set up the powerline kit, just plug in the kit’s smaller powerline unit and connect it to your router, then plug in the larger unit where you need it. Press the pair button on each adapter and you’ll have a secure powerline connection with strong 128-Bit AES encryption.
Unify Your Network with Wi-Fi Auto-Sync
Pressing the Wi-Fi Clone button instantly copies your router’s network name and password, and Wi-Fi Move automatically syncs new extenders and applies setting changes across your network.
Trusted Brand
Our world class R&D team, streamlined vertical manufacturing and strict quality control have enabled us to consistently create exceptional high-quality products for the last 22 years.
Product description
Advanced home Plug AV2 technology of the PH3 means users benefit from ultra-fast data transfer speeds of up to 1000Mbps. Perfect for bandwidth demanding activities like streaming Ultra HD video to multiple devices simultaneously, online gaming and large file transfers. actual data speeds vary and are limited by the product's Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product.
- Great solution for connecting TVs, set top boxes and other Ethernet connected devices in areas with bad Wi-Fi reception
- With advanced home Plug AV2 technology, PH3 Provides stable, data transfer rates of up to 1000Mbps for 4K HD video, multimedia player, online game
- 1 Gigabit Ethernet port connect devices like smart TVs, game consoles, and PCs to your network
- With inbuilt signal Indicator LEDs you can choose the best position for the adapters (Green means strong signal, Red means weak)
- Easy to install, Plug and play, no new wires and no configuration required. Operating Temperature: 0°C ~ 40°C(32°F ~ 104°F). Storage Temperature: -40°F ~ 158°F (-40°C ~ 70°C )
- Power saving automatically reduces power consumption by up to 88% and turns back on when you need it.
- Rigorous work and excellent choice of materials are the basis of PH3 reliable and durable transmission, its effective distance is up to 300 meters
User questions & answers
Question: | Does this item come with one ethernet cable or two ethernet cables |
Answer: | It comes with 2 quality ethernet wires. |
Question: | whey will work if conect on different breakers |
Answer: | 50% chance. Most homes have 2 power lines and each breaker alternates power lines. If both breakers are on the same power line it will work. So one device on breaker #2 and the second on breaker #4 should work. Ditto for 1 and 3. If the two devices do not work you can have an electrician come in and "move" the breaker from one slot to another. Another solution is to have an electrician come in and install capacitors across the two lines. This is inexpensive and will allow the devices to work no matter what breaker you put it on. |
Question: | if i buy the adapter am i ordering 2 for one room and the other room |
Answer: | Yes, you get two adapters in the order. One plugs to the modem and the wall outlet, the other plugs to the router and the wall outlet. They even supply the cords you need for plugging into the modem and the router. That was a pleasant surprise. They are not super long, so if you need a longer cord you'll need to buy your own, but the one supplied was fine for my set up. On a side note, I just changed Internet providers and the modem was moved to a different room. I just moved the adapter to that new room, plugged it all up and it stayed paired. I didn't even need to redo that step. I'm very impressed with this product. Always be sure to plug this adapter directly to the wall and not a power strip. The modem plug can be on a power strip, just not the adapters themselves. |
Question: | Can you add other powerline devices to current network |
Answer: | Yes, you can add up to 6 devices |
- Use your existing electrical wiring to extend your Internet access to any room in your house. Add Powerline access points throughout your home to create strong, reliable WiFi connections where you need them most
- Comes with a WiFi Powerline extender to provide wired and wireless coverage to hard-to-reach locations.
- Extremely fast speeds-up to 1000Mbps, Perfect for connecting smart TVs, streaming players & game consoles. System Requirements : 2.4 GHz/5 GHz 802.11 b/g/n/ac wireless interface to connect wirelessly to PLW1010v2
- Ideal for 4K HD streaming & lag-free gaming, Connect multiple adapters to expand your wired network coverage
- Homeplug AV2 technology supports Gigabit speeds through your electrical outlets for improved coverage.RJ-45 Ethernet port to connect via Ethernet cable
- Connect multiple adapters to expand your network coverage
- Plug and Play - Set up in minutes, no need to configure or install software
- Input power: 100V ~ 240V, 50/60 Hz
User questions & answers
Question: | I have a 2nd electric service in my garage/shop 35' from house where my router is plugged in, would I have to run a wire/extension cord to my garage |
Answer: | If both panels are serviced by the same electric supply on your side of the transformer, they're all connected and the limiting factor will be any distance limitations. This is why HomePlug is not recommended for apartments because the separate meters are serviced from the same transformer. |
Question: | Can I use the Ethernet cable on the second device to plug a wireless access point into |
Answer: | The second device IS a wireless access point... no need to plug in an addition wireless access point! |
Question: | I have 2 different electric panel boxes, one for each end of the house, how can I make this work |
Answer: | Mine was same way. I used one in the house and one in the garage w a different panel box and it worked perfectly. I had my doubts but it has great signal. |
Question: | I have a chromebook and an android phone. how do i connect it to my netgear router |
Answer: | Just as you would connect to the existing router. |
Product description
The Powerline 500 AV Adapter Kit with Built-In Outlet, model TPL-407E2K, uses existing electrical lines to create a high-speed network. Two adapters are needed to start a network. Connect one adapter to your router and plug another adapter into an outlet on your electrical system for instant high-speed network access. The compact form factor saves space and offers an additional electrical outlet. Plug In Install Simply plug in TRENDnet adapters! The encrypted Powerline signal auto-connects over an existing electrical system. Built-In Outlet With so many devices needing power, you don’t lose an outlet when plugged in. Plug the adapter into an outlet, then plug a power strip into the adapter. Network Stability Ultra-stable Powerline networking is preferred by internet service providers. PACKAGE CONTENTS • 2 x TPL-407E • Quick Installation Guide • 2 x Network cable (1.5 m / 5 ft.)
- Includes two TPL-407E adapters
- Powerline 500 networking
- Never lose an electrical outlet with the built-in socket
- Connects over electrical lines
- Two adapters are needed to start a network
- Compact form factor saves space
- Easy Installation
- Connectivity Technology: Ethernet
User questions & answers
Question: | Can i use this with ip wireless surveillance camera (camera comes w/ethernet port |
Answer: | If the camera is wireless, then you need to connect it to your WiFi network. If it has an ethernet port, yes you should be able to connect it that way. |
Question: | Will this product affect the wifi network to other devices |
Answer: | No, not by my experience. (I had different model TRENDnet Powerline adapter.) OTOH: occasionally, high voltage appliances, such as microwave, can affect the bandwidth of the powerline adapters when they run. Connectivity was not lost, but throughput would occasionally be reduced when the appliance ran. |
Question: | Does my tv have to have an Ethernet input |
Answer: | You need modem with external router in order to us them |
Question: | Do these work with tplink pass throughs |
Answer: | TP-Link pass throughs and TRENDnet Powerline AV 500 are from different companies. TRENDnet Powerline AV 500 has some security features, passwords, and settings that we use. Such security features are unlikely to be compatible, but the TP-LINK AV500 2-Port Powerline Adapter with AC Pass Through Starter Kit looks like the same device from the same factory. Mixing devices is taking a big risk they won't be compatible because of security features, or the chips inside the devices. A worst situation is when mixing the similar adapters they don't stop helping each other, and they have no security features to stop intruders in your network. Now, I feel fear that some other company sells a device that an intruder on the outside of my home can use to get into my network, because that similar device hacks my passwords quickly by plugging it into the outlet. If you buy all the same devices, and use the security software in each of your computers, then you will have the security nearly equal to real networking wires. Having extra devices purchased in advance helps with growing networking like we have. Nothing obsolete happens unless you move to gigabit speed at 1000 megabytes per second. These are only 500 megabytes per sec. We have learned that nothing on the Internet is a gigabyte speed at all unless it has fiber optic cable, so why get it? |
Product features
Plug In Install
Simply plug in TRENDnet adapters! The encrypted Powerline signal auto-connects over an existing electrical system.
Built-In Outlet
With so many devices needing power, you don’t lose an outlet when plugged in. Plug the adapter into an outlet, then plug a power strip into the adapter.
Network Stability
Ultra-stable Powerline networking is preferred by internet service providers.
Adapters
Includes two TPL-407E adapters
Powerline 500
Powerline networking over existing electrical lines
Built-In Outlet
Never lose an electrical outlet with the built-in socket-Plug the adapter into an outlet, then plug in other devices
Noise Filter
Advanced electrical noise filter boosts performance
Easy Installation
Simply plug in the adapters
Cross Compatible
Backward compatible with all Powerline 600, 500, and 200 adapters
Sync Button
Press the Sync button to change existing encryption keys
Energy Savings
Power Save mode reduces electrical consumption by up to 80%
Product description
Extend your home network with speeds of up to 2000Mbps using the D-Link DHP-701AV PowerLine AV2 2000 Gigabit Extender Kit. The kit includes two adapters so you can easily extend a network connection to a hard to reach location using your existing router. Using the latest in AV2 MIMO technology and Gigabit Ethernet connectivity, the DHP-701AV powerline extender creates a more reliable connection for use in hard-to-reach areas where Wi-Fi is too slow or not available. The DHP-701AV solution is ideal to stream HD media, connect game consoles or connect your smart TV for reliable connect to bandwidth intensive devices. Extend your Powerline network by adding up to 16 adapters in total. Backward compatible with PowerLine AV, AV+.3.
- MIMO technology with beam forming provides simultaneous data streaming and greater coverage
- Great companion for smart TVs game consoles media players and more
- Perfect for 4K HD video streaming and gaming
- Connect multiple adapters to expand wired network throughout your home
- 1 Gigabit port
- Plug & Play to create a powerline network in seconds
User questions & answers
Question: | What are the real-world, actual data transfer that you typically experience? At what distance |
Answer: | From tests in multiple homes, we have seen that almost all sockets get 100Mbps throughput. IF you are getting less then 100Mbps, you might want to make sure you are following the manufacturer's suggested installation procedure. That is, plug it into the wall and do not put it into an electrical extension strip as that will degrade performance. |
Question: | my housemates have the av2000, but its not in my budget, would the av2000 also work with the av1000 or even lower dlink powerlines |
Answer: | Yes, but it would work at the slower speed |
Question: | Can one adapter be used to supply a connection to multiple devices (xbox, playstation, pc, etc |
Answer: | Yes, with a switch as previously said. I have mine connected to a router to bring my internet connection into my house so all my devices are run through that one set of adapters. |
Question: | I want internet outside and to shed 200 ft away. can multiple units be installed? Will the shed (same electric bill) pick up the signal from main |
Answer: | It depends on how your home and your shed are wired. If your shed is wired to the same panel as the rest of your home it should work. It does not matter if you have different circuit breakers for the areas so as long as they are all connected to the same panel. GFI outlets will attenuate the signal and in most cases logically act as a dedicated line from the outlet to the panel because of how they are installed so don't put any of the powerline units on those type of outlets for you will not achieve the speed rated on the device nor will your traffic be visible to other adapters throughout your home potentially. |
Question: | Can you add food color to make the gum paste different colors |
Answer: | Yes, you can color fondant with any gel food coloring. Make sure to wear gloves since this item is already made up, so you will have to kneed the color into the dough. |
Question: | Does this contain Gelatin |
Answer: | It does not state on the GUM PASTE label that gelatin is included in the ingredients. Gum tragacanth is listed as a stabilizer and cellulose gum as a thickener. Corn syrup and corn starch also thicken in place of gelatin.The INGREDIENTS listed on the label are: Sugar, corn syrup, water, palm oil, gum tragacanth (stabilizer), egg white, titanium dioxide (coloring), cellulose gum (thickener), natural and artificial flavors, modified cornstarch, potassium sorbate (preservative), acetic acid (preservative). Contains eggs - Nut Free - Gluten Free. |
Question: | What is the shelf life after open |
Answer: | 6mo to a year after you open it, as long as you keep it in the plastic bag it comes in and snap close the secure lid. Going on 4 mo s with mine and fresh every time I open the bag. |
Question: | Can you dye this gum paste |
Answer: | I used the wilton paste jell and it came out beautiful. This gum paste was so much better than the bag wilton type from the hobby store. I was really happy with it.I made three 4-5 inch animals and still have some left. I used the tip I found on the internet of putting the ball I was working on in the microwave just for a few seconds right before I did my form. |
Product features
Higher Speeds Mean More Entertainment
Stream more HD media, play more online games and transfer all of the large files you want. AV2 MIMO technology will guarantee you a higher data transfer rate.
(Speeds up to 2000Mbps will let stream multiple HD videos simultaneously).
Do More With MIMO Technology
MIMO (Multiple Input Multiple Output) technology means higher data transfer rates, better coverage and a more stable network. In other words, your overall network performance will be improved thanks to the use of multiple antennas, compared to the use of a single antenna used in SISO (Single Input Single Output).
Easy Setup
Just connect in one of your adapters to your router, connect the other adapter to your device. and then press the Simple Connect button to create a secure connection. It’s that simple!
Product description
TP-Link TL-PA4010KIT Powerline AV500 Adapter Kit
- Wired connection with high-speed data transfer rate of up to 500Mbps, ideal for HD video or 3D video streaming and online gaming
- HomePlug AV standard compliant, with easy pair feature to add additional TP-LINK Powerline adapters to the network
- No new wires, Easy Plug and Play operation, No configuration required
- Patented Power-Saving Mode automatically reduces power consumption by up to 85%
User questions & answers
Question: | Are these two unit (transmitter and receiver) or one unit in |
Answer: | It's two parts yes. Works really good too. |
Question: | does this come with two devices? do all i have to do is plug in the device and then i can connect my computer with the ethernet cable |
Answer: | It comes with the 2 wall adapters that you need. you can then plug the adapter away from your router into an outlet near your desktop and plug the Ethernet cable in that way |
Question: | Can a switch be attached to the pc end of the connection to allow for two pc's to connect? can this be expanded by adding more individual units |
Answer: | Yes, you should be able to connect a switch to these adapters without issue. Keep in mind that while the switch prevents collisions these adapters work like a hub inside the power lines of your home. It is fine for two adapters regardless of how many devices are connected to either adapter but once you plug a third adapter in it becomes a collision domain and you can potentially take a small performance hit. This should not be noticeable though unless you have several of these adapters connected and using data at once. Basically when practical it is better to connect several devices to one adapter through a switch or wireless access point than to add a second power adapter. |
Question: | Can I use more than 2 units |
Answer: | These units work in pairs so if you configure them with two devices paired for 1 ethernet connection then yes. |
- [2-UNIT KIT] Includes everything you need in order to turn your electrical outlets into an ultra fast network. Expand your internet anywhere in the home with up to 16 devices in one network.
- [OPTIMIZED FOR ONLINE VIDEO STREAMING & GAMING] Enhance your network performance for streaming and gaming. Reduces Lag and dropped frames using LDPC/FEC (Forward Error Correction) technology.
- [WORKS IN APARTMENTS & OFFICE BUILDINGS] Designed for high density environments (eg. Apartments, business offices, condos, hotels, etc.) using NDIM Signal Segregation Technology.
- [THE NEWEST STANDARD IN POWERLINE] Delivers better real world performance with unique G.hn algorithms that improve upon older powerline standards. Technology like MIMO Dual Phase Technology delivers a faster and more reliable connection and LDPC to reliably cross phases
- [A DIRECT CONNECTION, EASIER TO INSTALL THAN ETHERNET] Installing Ethernet Cable can be expensive and troublesome. Get a strong, direct internet connection without the trouble.
User questions & answers
Question: | I already have two. How many can I stack with this |
Answer: | Specs say 'up to 16 nodes' ... so... 14 more! ;) |
Question: | Can you use more than one rx? meaning if i go modem->router->switch->nexuslink-kit1->circuit1->nexuslink-kit |
Answer: | As long as one is connected to your switch, the rest will connect through it. ('up to 16') |
Question: | Can i connect a receiving unit into an unmanaged switch so i can connect tv, directtv, xbox, etc to wired internet at one location |
Answer: | Yes, just treat two adapters as a long Ethernet cord. ( that happens to connect thru home wiring) |
Question: | Wifi n300 (gpl-1200wn |
Answer: | These adapters work across my home, two dozen circuit breakers on two phases. Can’t attest to everyone’s home wiring, but it works anywhere in my home (2 floors, 1999 construction, 2500 sf) |
Product features
Expand Ethernet Connectivity (GPL-1200)
Bring a secure, wired Ethernet connection to remote rooms within the home/office via the electrical wiring.
Best for: Reliable Home entertainment, Game Consoles and PC connections.
Ethernet with Pass Through (GPL-1200PT)
Expand your Ethernet Connectivity in your home and continue to utilize the outlet.
Best for: Home entertainment, game consoles, and PC usage where you need an additional outlet.
Power over Ethernet (GPL-1200PoE)
Deliver data connectivity and power via PoE (Power over Ethernet) to hard-to-reach locations via the existing electrical wiring.
Best for: PoE devices including: Surveillance Cameras, VoIP Phones, and connections to access points.
WiFi N300 (GPL-1200WN)
When Wireless connectivity is necessary, extend coverage to any room within the home/office via electrical wiring.
Best for: Quick and easy WiFi Connections to phones, tablets, and other WiFi enabled devices.
Reduce In-Game Lag
When you use WiFi, you risk higher latency levels due to interference from home structures, like walls, doors, and floors as well as other devices such as smart phones, laptops, and TVs. Switch to G.hn Powerline Adapters to get a reliable and convenient wired connection.
Enhance Your Home Entertainment Experience
Delivers Internet to remote spots in your home or business and can create a more reliable connection than WiFi.
Don’t just Extend, Connect
G.hn technology delivers superior performance through a direct electrical wired connection. Benefit from algorithms designed to improve video quality and minimize lag.
Turn Your Electrical Outlets into an Ultra-Fast Network
Maximize existing electrical outlets by connecting up to 16 devices within a G.hn Powerline Network.
Latest Reviews
View all
Unknown Friend T Shirts For Kids
- Updated: 28.04.2023
- Read reviews

Bug Powders
- Updated: 21.07.2023
- Read reviews

Templates For 3D Pen
- Updated: 04.04.2023
- Read reviews

Electric Fireplace Tv Stands
- Updated: 31.05.2023
- Read reviews

Pyrex Bowls
- Updated: 18.07.2023
- Read reviews