14 best cooler master cpu fans

Product description

The legendary Air cooler is back. The Hyper 212 RGB Black edition is a no fuss get the best cooling air cooler. The aluminum top cover and nickel plated Jet black fins, give the Hyper 212 RGB Black edition a premium look. The sleek Jet black not only makes it look great, but, does increase cooling performance.

• Direct contact technology: 4 Heat Pipe with exclusive direct contact technology effectively provides excellent heat dissipation; Air flow: 57.3 CFM; Noise level: 26.0 decibels
• Precise air flow: Stacked fin array ensures least airflow resistance which allows cooler air flow into the heat sink
• RGB LED controller: The wired RGB LED controller allows for customizable colors and effects with just the touch of a button
• Smart Fan sensor for jam protection: Never worry about your cables getting snagged or components being mucked up ever again
• Snap and play: Intuitive fan bracket design makes upgrading and removing the fan a breeze
• CPU socket support: Intel: LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	AM4 support
Answer:	Hello Mark, Yes, the 212 Black edition does have support the AM4 right out of the box. CM-PNguyen
Question:	Will this fit a AM3+ motherboard
Answer:	Here is a video of my AM3+ motherboard with this fan inside https://www.youtube.com/watch?v=rM34Jzi-6fg and here is a a video on the Noise Level https://www.youtube.com/watch?v=fTQ2dlrpEHI
Question:	Do you add thermal compound
Answer:	Hello, Yes you would apply thermal compound. There is a small tube included with the unit. CM-PNguyen
Question:	noise
Answer:	Much quieter than a dvd rom spinning up.. Only noise is when I’m playing a severely demanding cpu game. Even then it’s barely noticeable at 2500rpm

Product features

Hyper 212 RGB Black Edition

The legendary Hyper air cooler is back and better than before. The Hyper 212 RGB Black Edition offers better installation and great performance, easily one of the best air cooling solutions. Aluminum top cover and nickel plated jet black fins, give the Hyper 212 RGB Black Edition a premium aesthetic appeal. The sleek jet black not only makes it look great, but also increase cooling performance.

Direct Contact Technology

Our increases the surface area of the copper base while the 4 heatpipes efficiently dissipates heat away from the CPU.

Precise Air Flow

Stacked fin array ensure least airflow resistance which allows cooler air flow into the heat sink.

RGB LED Controller

The wired RGB LED Controller allows for customizable colors and effects with just the touch of a button.

Smart Fan Sensor for Jam Protection

Never worry about your cables getting snagged.

Product description

The LC120E RGB incorporates Cooler Master's Dual Chamber Pump, 120 millimeter Fan, and RGB Controller to control the lighting effects. With its matt black styling, sleeved tubing and RGB lighting effects, the LC120E RGB is a Cooler Master original design and enables a colorful entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and 120mm fan design. Whether you're building new or just upgrading, it's easy to install on the latest Intel or AMD systems and 120 millimeter radiator fits almost any PC chassis.

• Liquid Cooling System:The cooler master LC240E delivers efficient cooing with our dual pump 120 millimeter fans; It keeps your system running effectively, even in the high load times; Air flow: 66.7 CFM; Noise level:31.5 decibels
• Dual Chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology
• 120 millimeter fans: These fans keep a good flow going to your key systems; Silent cooling at an efficient rate
• Sleeved tubing reinforced FEP tubing to keeps the tube kink free and the liquid flowing to your CPU
• Rgb Controller: allows you customize colors and light effects
• CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	Would this work with a z370 sli slim motherbaord
Answer:	Yes, the z370 motherboard is a socket 115x so this CPU cooler will fit as long as there is a little space around the CPU socket (most should have more than enough space)
Question:	Does the cooler work on a mobo intrl lg1151 socket
Answer:	Hello Nicolas, Yes, this liquid cooler AIO should mount to an LGA 1151 socket without any issues. CM-PNguyen
Question:	Is the cooler's tdp actually 130w? the listed figure is very low compared to similar cooler master aios
Answer:	And now it’s 2020, still 130w tdp. 240 liquid cooling should be good for most 200-250 tdp chips, just swap the fan for an arctic or Noctua.
Question:	Hi, I have read alot of reviews saying the therr is a design flaw, Can the manufacturer guarantee that the plsstic tabs will not brake
Answer:	I owned three of these and all three had problems. The design flaw is the mounting bracket and the way it connects to the water pump. Under pressure the tabs will break and you must be vert careful when installing it. I have two break on installation and another pop after about 4 months of usage. I have built PC's for over 25 years, so I understand how to properly apply pressure when installing CPU coolers. I would wait until cooler master fixes this issue. Hopefully the next revision will have a better mounting system.

Product features

MasterLiquid LC120E RGB

MLLC120E RGB RGB is a Cooler Master's original design, with its matte-black styling, braided cabling and RGB lighting effects for a colorful entry liquid cooling. Cool in any color as the RGB options extend to both fan and water block, all with six lighting effects from which to choose. Reliability, performance, and quiet operation are ensured by its unique Dual Chamber Pump and 120mm MasterFan. Whether you're building new or upgrading, it's easy to install on the latest Intel or AMD system.

Dual Dissipation Pump

Our low-profile dual chamber pump delivers performance leaps over single-chamber pump designs.

Double FEP Tubing

FEP makes for durable yet flexible tubing, while the mesh outer sleeve creates a premium look.

Low-Resistance 120 mm Raditator

Beautifully designed to maximize cooling surface area.

Library Quiet

Built sturdy, keeping vibrations and rattle to nearly inaudible levels.

Product description

The MasterAir MA620M comes with dual blacked out aluminum towers with a uniform 6 heat pipe layout to dissipate the heat evenly. The Masterfan SF120R provides high air pressure with silent performance to cool away the heat from the heat pipes in silence. Easy mounting system along with array of Addressable RGB LED lighting makes the MA620M the best option in the market for an air cooling solution

• Dual tower heatsink – a combination of two sets of heatsink covers more surface area and 6 heat pipes uniform layout distributes heat over more evenly across heatsinks. Air flow - 53. 4 CFM. Noise level - 30. 0 decibels
• Uniform 6 pipe – a combination of two sets of heatsink covers more surface area and 6 heat pipes uniform layout distributes heat over more evenly across heatsinks
• Lighting badge – cm hexagon logo and embedded addressable RGB lighting strip provides unique perspective light effect
• New SF120R Fan – with silent driver IC and a wide range of speed settings, it can be used for silent operation or fine-tuned for maximum cooling performance
• Addressable RGB LED controller – the wired addressable RGB LED controller allows for customizable colors and effects with just the touch of a button.
• Easy mounting system– exclusive all-in-one mounting design for Easy installation
• CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2

User questions & answers

Question:	Does it come with 2 fans in the interior or just
Answer:	I’m pretty sure it does. It has mounting hardware for both AMD and Intel boards.
Question:	Will this on Phanteks P
Answer:	I used the stuff that was pre applied and I get upper 30s at idle and mid to upper 60s under load with a ryzen 5 3600x. Seems to be pretty good and there’s no guessing with the right amount of thermal paste needed.
Question:	Will this fit on Asrock b450 pro 4 motherboard for R
Answer:	Yes
Question:	Can this cooler be mounted for vertical airflow? I plan to vent out the top of my case with 2 140mm fans and want a cooler that can push air upward
Answer:	Yes, there is a layer of thermal paste on the base of the unit. It seems perfectly sufficient for the task.

Product features

MasterAir MA620M

The MasterAir MA620M comes with dual blacked out aluminum towers with a uniform 6 heat pipe layout to dissipate the heat evenly. The Masterfan SF120R provides high air pressure with silent performance to cool away the heat from the heat pipes in silence. Easy mounting system along with array of Addressable RGB LED lighting makes the MA620M the best option in the market for an air cooling solution​.

Easy Mounting System

Exclusive All-In-One mounting design for easy installation

SF120R Fan

With silent driver IC and a wide range of speed settings, it can be used for silent operation or fine-tuned for maximum cooling performance

Dual-Tower Heatsink

A combination of 2 sets of heatsink allows bigger and more spread out surface area—the black paint enhances radiation cooling performance

Addressable RGB LED Controller

The wired Addressable RGB LED Controller allows for customizable colors and effects with just the touch of a button

Product description

When ultra-high performance Coolers demand additional performance, count on blade master PWM fan series to increase cooling efficiency. Blade master offers a balance of high Air pressure with balanced airflow and minimal noise levels. With the blade master family of 120mm, 92mm, and 80mm fans, unique wave-form blades create increased pressure that exceeds competitor fans at the same airflow. The highest air pressure allows blade master fans to blow directly through dense performance heat sinks for extreme cooling.

• Well-balanced cooling performance with fan airflow, air pressure, and noise; 10.9 - 40.8 CFM, 13-28 dba
• Wide PWM fan speed range between 600 - 2000 R.P.M.
• Anti-vibration rubber pads around the edges to decrease noise
• Distinguished blade shape for airflow improvement.

User questions & answers

Question:	why does the specs state wide range rpm 600-2000? Can the rpm be controlled
Answer:	a separate fan controller is required, but the fan itself does not have any speed control. the rpm range represents the rated range of speed. 600 being mininum, 2000 is maximum. lower than 600 the fan may stall, higher than 2000 overheat.
Question:	What is the air flow CFM
Answer:	Air Flow (CFM)21.2 - 76.8 CFM
Question:	Do these fans operate on 120v or 12v
Answer:	I believe these are 12v fans.
Question:	Are mounting screws included
Answer:	I only received the 4 screws but were too large to even be able to screw directly to the fan. Even if I take the fan out and try to screw in the 4 screws, none of them fit.

Product description

Standard cooler with reliable performance for all desktop cooling applications

From the Manufacturer

• Compatible with 65W AM2/AM3 sockets
• Designed for MITX and MATX systems where height restriction is an issue
• Slim 80mm fan provides cooling airflow at a low profile
• RoHS and UL certified
• Cooler Master is an Intel qualified thermal solution manufacturer

User questions & answers

Question:	So will this replace dk97g52aol
Answer:	Its is a 4 screw just make sure the mm match what you are replacing.
Question:	I ordered the 3 pin fan, but I was not aware of this, but my computer requires a 4 pin fan, can I have the link for the 4 pin or is there an adapter
Answer:	The fans we sell have 4 pin fans, I guess you brought this from some other seller. We are Interweb Computer Solutions and we have the 4 pin fans
Question:	This is 3 pin not 4 pin correct
Answer:	yes, 3 PIN. I just verified - I currently have 2 in stock. thanks
Question:	is this a 3 pin or four pin connection to the motherboard
Answer:	It's 4-pin but We sell a different copper core 3-pin version too

• Proven premium heatsink (more than 200 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs
• Slim 120mm size for excellent case, RAM and PCIe compatibility: Fits most tower cases (158mm height), doesn’t overhang the RAM slots, doesn’t block the PCIe on most ATX and Micro-ATX motherboards
• Renowned, award-winning NF-F12 120mm Focused Flow fan with Low-Noise Adaptor and PWM for automatic speed control: Full cooling performance under load, whisper quiet at idle!
• Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1150, LGA1151, LGA1155, LGA1156, LGA1200, LGA2011, LGA2066 and AMD AM4, AM3(+), AM2(+), FM2(+)
• Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 10900K, 10700K, 10600K, 10980XE) and AMD Ryzen (e.g. 3950X, 3900X, 3700X, 3600X)

User questions & answers

Question:	Are these the LTT addition coolers
Answer:	Teaming up with popular youtuber Linus Sebastian from Linus Tech Tips, the first 5000 pieces of NH-D15 chromax.black and NH-U12S chromax.black sold through Noctua’s official Amazon and eBay stores will be an exclusive Linus Tech Tips limited edition that includes extra orange anti-vibration pads and custom Linus Tech Tips fan stickers. The Linus Tech Tips limited editions have a strictly limited volume and will only be available via Noctua’s official Amazon and eBay stores while stock lasts. The non-limited versions of the NH-D15 chromax.black and NH-U12S chromax.black will start selling via Amazon as soon as the Linus Tech Tips limited editions are sold out and via other sales partners at the end of October.
Question:	Did others use the lga15xx hardware on lga1200 board? board i have is unthreaded. prime95 after hour gave 47c. is set up ok
Answer:	A temperature of 47c is excellent for a cpu but that sounds like a no load temperature. Run some graphic hungry games and see what happens.
Question:	I already have AM4 using stock cooler backplate installed . when i buy do i need to replace it
Answer:	no, the stock backplate will be used for this cooler to fit.
Question:	Does it come with extra clips to add another fan to the other side of the heat sink
Answer:	It comes with one extra pair.

Product features

Classic 120mm tower size for excellent case and PCIe compatibility

Standing 158mm tall, the NH-U12A is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top PCIe slot on most standard ATX or Micro-ATX motherboards, ensuring optimum compatibility with multi-GPU setups.

100% RAM compatibility

Thanks to its slim design with only 45mm fin depth, the NH-U12S will not overhang the RAM slots even with two fans installed. This gives the user full access to the memory modules on all current CPU sockets and ensures 100% compatibility with tall heatspreaders or optional memory fans.

NF-F12 120mm Focused Flow fan

Recommended by more than 150 hardware publications and thousands of enthusiasts worldwide, the Noctua’s premium-quality NF-F12 Focused Flow 120mm fan is renowned for combining superb static pressure, excellent heatsink performance and surprising quietness of operation.

Colour-customisable

Using the optional NA-HC1 and NA-HC2 heatsink covers as well as the NA-SAVP1 anti-vibration pads (available in black, blue, green, red, yellow, white), the NH-U12S chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.

Cooler Specifications

• NF-F12 PWM chromax.black premium fan
• Low-Noise Adaptor (L.N.A.)
• NT-H1 high-grade thermal compound
• Black SecuFirm2 multi-socket mounting kit
• Black anti-vibration pads and fan-clips for second NF-F12
• Noctua Metal Case-Badge

Fan compatibility

120x120x25

Product description

Case cooling is becoming more essential These days. The better airflow inside your system, The cooler and more stable system you will get.

From the Manufacturer

From the Manufacturer



PRODUCT FEATURES



PRODUCT SPECIFICATIONS

• Air flow - 44.73 CFM. Noise level - 23.7 decibels
• 4 IN 1 Value Pack
• Higher air flow to enhance cooling performance
• Ultra silent operation at 19 dBA
• Economic solution for perfect performance
• RoHS compliance for protecting the environment

User questions & answers

Question:	Is the 92mm size a measure of the physical plastic, so that it's 90mm from screw to screw
Answer:	The size is the actual outside measurements of the housing. A 92mm fan has holes on 82.5mm centers and a 120 mm fan has holes on 105mm centers. I have a Thermaltake case with room for a 120mm fan, but the widest holes are on around 93mm centers that don't fit any readily available fan that I have found except these. My 120mm version of these has a second set of holes on the output side on about 93mm centers that work in this case. I stocked up while they are available.
Question:	I would like to use this fan to help cool a rv fridge. which two wires should I use to connect it
Answer:	Just remember your RV's (or car's) "12 volts" is actually higher than 12 volts. Case fans, LED lights, anything with a 12v wall-wart all take exactly 12volts. Depending on what it is, 13 to 14 volts plus might not be a problem, but to play it safe I'm using a "Buck Converter" to provide up to 3 amps of 12 volts for my LED's and a Blu-ray player. Not sure if it would be needed for these fans, my guess is they will work fine without it, but may not last as long being constantly fed higher voltages than they're rated for.
Question:	what is the cfm
Answer:	Newegg lists CFM at 44.73 for the 120mm case fan. I believe it's accurate.
Question:	what adapter do i need to connect these to my power supply? and can i connect all on the single cable
Answer:	I purchased the 140 mm, though I would assume they should be the same. the fans themselves are 3 pin if you are going to attach them directly to your motherboard but they also come with 3 pin to molex adapters (which I used) in order to connect them directly to the power supply. I was able to attach two fans in series to one of my power supplies molex strips.

Product features

Cooler Master Sleeve Bearing 120mm Silent Fan for Computer Cases

Features:

• Silent operation for case cooling
• Higher air flow to enhance cooling performance
• Fan Dimensions (L x W x H) 120 x 120 x 25 mm / 4.7 x 4.7 x 1 inch
• Fan Rated Voltage 12V DC
• Fan Rated Current 0.07 A
• Fan Speed 1200 RPM ± 10%

Product description

be quiet! Pure Rock slim is particularly applicable to compact and quiet multimedia and graphics systems. Among the features that give it such an excellent price-to-performance ratio are:



High 120W TDP cooling efficiency

full configuration of RAM Memory banks in PC cases with limited space

three high-performance 6mm heat pipes with aluminum caps

a silence-optimized, seven blade 92mm be quiet! fan

pwm variable speed operation to help balance cooling and quietness

compact design for easier and more convenient installation

brushed aluminum finish

3-year manufacturer's warranty

product conception, design and quality control in germany



for famous be quiet! low noise operation (Max. 25.4Db(a)) and cooling performance at entry level pricing, pure Rock slim is clearly your CPU cooler choice.



▪ Intel: 1150/ 1151/ 1155/ 1156

▪ AMD: AM2 (+)/ AM3 (+)/ AM4/ FM1/ FM2 (+)

• A high 120W TDP cooling efficiency
• Full configuration of RAM Memory banks in PC cases with limited space
• Three high-performance 6mm heat pipes with aluminum caps
• Silence-optimized, seven Blade 92mm be quiet! fan (Max. 25.4Db(a))
• Pwm Variable speed operation to help balance cooling and quietness
• Intel: 1150/ 1151/ 1155/ 1156
• Amd: AM2 (+)/ AM3 (+)/ AM4/ FM1/ FM2 (+)

User questions & answers

Question:	Does this come with thermal paste
Answer:	It comes with some already applied, yes
Question:	This cooler include thermal paste
Answer:	The cooler does come with thermal paste reapplied. Be careful not to disturb it with the plastic casing included.
Question:	comes with thermal paste
Answer:	Paste is on the cooler plate spread evenly. I ran full load test on a Ryzen 5 3600 and the CPU never came close to being overheated.
Question:	Is this cooler compatible with AM
Answer:	Yes it is. The instructions are not the best. The fan exhausts vertically on the AM4. That irritates some people but heat rises so it works very well. I would buy again.

Product features

Slim and Compact Design

Thanks to its asymmetrical and compact construction Pure Rock Slim is the perfect choice for PC cases that have limited space. Notwithstanding it allows full configuration of RAM memory banks. For this reason, the cooler is compatible with a vast array of equipment and allows many possible installation configurations.

High Cooling Efficiency

Pure Rock Slim is aimed at the essential category of PC systems. With 120W TDP it offers an astonishingly high cooling capacity for this category.

High-Performance Heat Pipes

Pure Rock Slim is equipped with three heat pipes that have aluminum caps. This is the key to its great cooling performance, because they transport the heat to optimum locations on the cooling fins.

Silence-Optimized Operation

The seven-bladed silence-optimized 92mm be quiet! PWM fan with high-quality sleeve bearing facilitates the best balance between cooling performance and silent operation. The fan blades are airflow-optimized to reduce noise-generating turbulence.

Product description

The MasterAir G100M is a 74. 5mm low profile CPU cooler designed for small form factor cases. It utilizes Cooler Master heat column technology, which enables exceptional heat transfer in compact size. The RGB ring/fan allows for full color customization.

• Heat Column: Custom Cooper Heat Column technology increases the direct contact surface area for exceptional heat transfer and cooling performance; Air flow, 22.63 CFM; Noise level: 30.0 decibels
• Low profile aluminum stack fins designed for excellent heat dissipation
• RGB ring: illuminate your cooler with RGB ring and Fan which are both Certified compatible to motherboard vendors RGB software
• Low profile: 74; 5mm in height, perfect for small form factors and HTPC
• Wired RGB controller: the controller allows customizable colors and effects for the fans and top cover with just the touch of a button
• Cpu socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	Does this support motherboards socket of lga1151 or better yet a msi z370 gaming pro carbon
Answer:	Yes it does. -CM Myke
Question:	Is there a way to control the addressable rgb leds in the ma410m through software, either aura or coolermaster’s
Answer:	There is, in the exact way you described. Either through Aura or our software. -CM Myke
Question:	Would this fit with 4x4 hyper x ddr4 ram
Answer:	Hello Jaime, The G100M has a stated ram clearance height of 34.5mm. So this will largely depend on which series of DDR4 you are going to use from the HyperX line. The Fury DDR4 should clear it with a height of 34.04mm, the Predator line won't, with a height of 42.2mm. CM-Phuc
Question:	Can it run crysis
Answer:	It'll 'blow' it away. -CM Myke

Product features

MasterAir G100M

The MasterAir G100M is a 74.5mm low-profile CPU cooler designed for small form factor cases and compact PC builds. It has the Cooler Master custom Heat Column technology which enables exceptional heat transfer with the compact size. The illumination of RGB LED ring and fan allows for full color customization which is easily controlled by the wired RGB LED Controller. A powerful 92mm fan is included to maximize the top down cooling.

Heat Column

Cooler Master custom Heat Column technology increases the direct contact surface area for exceptional heat transfer and cooling performance.

RGB Ring

Illuminate your cooler with RGB Ring and fan which are both certified compatible to motherboard vendors RGB software.

Low-Profile

74.5mm in height, perfect for small form factors and HTPC.

Product description

MasterFan MF120 Halo a new series to the MasterFan family providing air cooling solution for CPU liquid radiator and chassis in-take With its Duo-Ring Addressable RGB Lighting sporting 24 Individually Controlled ARGB LEDs for the most stunning visual effect on any gaming rig MF120 Halo are fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a perfect blend to cool your entire system and its components in silence Hybrid Fan Blade Design combing an Air Balance with a Wave Shape fan blade design for a Static Pressure airflow to tackle heightened impedance and resistance in CPU liquid radiator low-noise or mesh chassis ventilation while boosting overall airflow.

• Duo-Ring Addressable RGB Lighting 24 Individually Controlled ARGB LEDs for a stunning visual effect
• Performance Engineered Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator low-noise or mesh chassis ventilation while boosting overall airflow
• Silent Cooling Technology Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
• PWM Fan Control Dynamic speed adjustment between 650 rpm to 1 800 rpm minimizing noise or maximizing airflow
• Certified Compatibility Compatible with most of Addressable RGB capable motherboards Aura Mystic Light and Polychome Sync

User questions & answers

Question:	How are the mounting holes on the 200mm fans laid out? will they fit in cases with one screw per corner
Answer:	No you don’t need to use all 8 holes
Question:	Me gustaría saver si trae el juego de cables para conectarlos todos a una sola coneccion de corriente y rgb
Answer:	Trae el splitter para conectar el pwm de 3 a 1, y el rgb se conectan uno con el otro, y podes conectar al final a la mb o al controlador
Question:	Please clarify each fan cable distinctly; are the digital argb cables 3-pin and are the pwm power cables 4-pin
Answer:	ARGB is standard 3 pin [00_0] the RGB (non-addressable) option is 4 pin [0000] PWM is 4 pin
Question:	I know it is certified for "asus aura, msi" but can it work with gigabyte rgb fusion
Answer:	They will work with fusion if the motherboard you have has a compatible ARGB header. CM-PNguyen

Product features

MasterFan MF120 Halo

MasterFan MF120 Halo, providing air cooling solution for radiators and case intake. Duo-Ring Addressable RGB Lighting sports 24 Individually Controlled ARGB LEDs for the most stunning visual effect.

Fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a blend of cooling and silence. Hybrid Fan Blade Design combines an Air Balance with a Wave Shape fan blade for a Static Pressure airflow to tackle heightened impedance and resistance.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

ARGB Header Extender

The extended ARGB 3 pin plug is also a daisy chain connector for multiple ARGB devices even if your motherboard only has one ARGB header.

Product description

SickleFlow 120 ARGB 3in1 is our signature cooling performance with a rejuvenated ARGB design to the Cooler Master Fan family, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. Optimized blade design with updated curve that improves air flow and air pressure. Enhanced frame structure, reducing turbulent flow and noise and increasing overall work efficiency. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

• ARGB Lighting: Signature cooling performance with an ARGB design: a perfect choice for all of the users wanting lighting effects that are individually customizable.
• New Blade Design: Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.
• Enhanced Fan Frame: Enhanced frame structure, reducing turbulent flow noise increase efficiency.
• Sealed Bearing Structure: Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

User questions & answers

Question:	So how do these all connect? Does it have an rgb hub or are they all daisy chained? What do I need to buy extra to make them work
Answer:	I sorry for we have not 140mm, but the 140mm fan will have sample in May fans connector is 6PIN, the strip connector is 4pin, please know than
Question:	My motherboard does not support RGB and would like to know what controller would be recommended from the manufacturer
Answer:	yes
Question:	Will they fit the cooler master Q300L
Answer:	They pulse, they can stay constant, they can do all sorts of stuff with the colors i really enjoy them. I have bought multiple packs of them for people's builds, they look & work great.
Question:	Anyone have issue with leds? mine are not working. at all
Answer:	The quick answer is yes with most motherboards. It took a bit to get this working with everything (I have the z470) but basically you are connecting these into the hub that comes with this, and connecting that to your power supply/ pc. The RGBs have the 6 pin thing going on but the hub has the 4 pin and you can pretty much find connection pieces or hub that work with almost any motherboard, but yes definitely yours. My quick review is the one entitled "this can work several ways..." and you can see the MB in the back and in the video.

Product features

SickleFlow 120 V2 ARGB 3n1

SickleFlow 120 V2 ARGB, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

Sealed Bearing Structure

Two-tier sealing mechanism, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

• Supports Intel Socket 130W LGA20XX/LGA1366/LGA115X/LGA775 and AMD Socket 125W AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1
• 120x120x25mm PWM fan with blue LED
• 4 sintered powder heatpipes directly touch the CPU surface
• Extra fan clips provided allow adding a second fan
• Can be easily installed without moving the motherboard

Product description

COOLERMASTER FAN HYPER 212X CPU COOLER FOR INTEL AMD ALUMINUM HEATPIPE DUAL FAN

• UPC: 884102024382
• Weight: 2.000 lbs

User questions & answers

Question:	Bring the 2 fans? work for Ryzen? What other sockets works
Answer:	I read, and if you have adapters, I recommend it. On my computer it works very well and I am a graphic animator.
Question:	Will this work better then the wraith cooler that comes with a ryzen
Answer:	Yes, it has more surface area for heat transfer, and can move more air.
Question:	En este articulo vienen los dos ventiladores..???? o solo uno
Answer:	Con dos
Question:	Is there X bracket included
Answer:	yes the bracket is included with the cooler. The install was not bad but took a little to figure out. the instructions on installing the bracket list installing the brace on the back of the mother board last. That made no since to me so I installed it first. At that point I could just screw the holding screws into the extensions on the brace. Also it was critical to get the brace in the right position prior to setting the cooler on the chip and then after the cooler was set in place I needed to put a lot of pressure on the brace in order to be able to screw it to the holding bracket.

Product description

HYPER 212 EVO V2: THE LEGEND EVOLVES

Delivering 10% cooler performance than the EVO and host of superior design features, the 212 EVO V2 is the latest evolution in the legendary Hyper 212 line. 

LATERAL THINKING – OFFSET THE HEATSINK ARRAY

By shifting the heatpipes and stacked aluminium array backwards, the Hyper 212 EVO V2 reduces the total height clearance to 155mm (a major issue for compact PC cases) and frees up space to guarantee 100% RAM socket clearance. 

SICKFLEFLOW V2 FAN: MORE POWERFUL, LESS NOISE

The V2’s hybrid blade design delivers fan greater air pressure (max. 2.52 mmH2O), which is crucial for cooling dense heatsinks, but generates less noise (8~27 dBA. For turbo push/pull fan configurations, the 212 EVO V2 includes secondary fan brackets and a splitter cable.

FANS ASKED, COOLER MASTER LISTENED

The all-new universal mounting bracket supports the latest AMD (AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1) and Intel (2066/2011-v3, 2011, 1200, 1366, 1156, 1155, 1151, 1150, 775) sockets, and allows users to simply choose a side, set the clips, and fasten everything together in minutes without a fuss. Includes screws and MasterGel Pro thermal paste (8 W/m.k).

• IMPROVED V2 PERFORMANCE - The Hyper 212 EVO V2 outperforms the legendary EVO with 10% lower temperatures across the board, while the new heat sink offers more system flexibility by taking up less space - it’s also quieter and easier to install/upgrade
• DIRECT COOLING WITH FINS - The primary heat exchanger features 4 embedded copper heat pipes (Ø6mm) in flat array and includes additional aluminium fins upon the plate to further augment thermal conductivity
• OFFSET ALUMINIUM HEATSINK - The stacked-fin array (with superior 212X vent cooling) has been offset slightly to reduce the overall height clearance from 159 to 155mm, and to free up space on the motherboard for high-profile RAM slots
• 120MM SICKLEFLOW V2 FAN - The latest SickleFlow V2 hybrid blades deliver ample air volume (62 CFM) with outstanding pressure (2.52 mmH2O) while producing less noise (8-27 dBA) - dual fans can be installed for a push/pull airflow configuration
• ALL-NEW UNIVERSAL BRACKET - The new socket kit (with mounting screws) is easier to install and supports the latest AMD & Intel CPU’s - accessories include MasterGel Pro thermal paste (8 W/m.k) and secondary fan mounting brackets (with splitter cable)