12 best arctic 120mm pwm fans

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• PERFECT CASE FAN REGULATION WITH PWM: The PWM function allows the motherboard to run the fan precisely at its necessary speed, this guarantees the required cooling and minimizes the noise level
• PWM SHARING TECHNOLOGY (PST): PST assures that all of your fans listen to one control signal, e.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 230–1350 RPM, Airflow: 53 CFM/90.1 m³/h (@ 1350 RPM), Noise Level: 0.3 Sone (@ 1350 RPM), Pin: 4-pin

User questions & answers

Question:	Does these have PWM
Answer:	I looks like it is spinning clockwise.
Question:	Is it 4 pin or 3 pin? The earlier answer seems to be guessing. 3 pin is PWM, and 4-pin is both PWM and measured RPM (tachometer pulses) as feedback
Answer:	No, it doesn't. However Mugen 5 Rev. B comes with 2 more fan clops that can be able to clip 2nd fan.
Question:	What is the difference between Rev. 2 and Rev. 1 - I can't find the differences on their site. Thank you
Answer:	Each fan is .13 amp as measured by my digital meter.
Question:	Static Pressure? can't seem to fine it any where online
Answer:	16.6~51.17

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Perfect Case Fan Regulation with PWM

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

PWM Sharing Technology (PST) Lowers Noise

If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.

Two Way Installation

Blow warm air out of the case, draw cool air into your case.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure
• 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors
• EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin

User questions & answers

Question:	Do you have a whining noise on different rpm? my sounds unbearable
Answer:	made for wrestling action figures
Question:	Can it be connected to 3 pin fans
Answer:	yes they do
Question:	The pst connections has only 3 pins. Will the speed be the same has the main fan that has 4 pins connected on to the 4 pin motherboard ? Bios in pwm
Answer:	Ring is a decent size for toys.
Question:	Do these fans come with screws or rubber pins to mount the fans, or are those bought separately
Answer:	they are plastic

Product features

Optimised for Static Pressure

During the development of P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a Magnet ring, which allows the P12 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

200 to 1800 RPM regulated via PWM

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing

Thanks to a special technology developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• LOW TEMPERATURE: Bionix gaming fans last four times longer thanks to the low temperature of the coil, therefore, we extend the warranty to 10 years
• 200 TO 1800 RPM: With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F120 fan speed can be controlled synchronously with all your other fans together
• PWM SHARING TECHNOLOGY (PST) LESS NOISE: The PST ensures that all your fans listen to a single control signal, stop at low load, turn whenever necessary
• OPTIMISED FAN DESIGN: We have further optimised fan blade design for higher airflow with reduced noise
• TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 69 CFM/117 m³/h (@ 1800 RPM), Noise Level: 0.5 Sone (@ 1800 RPM), Pin: 4-pin

User questions & answers

Question:	The description says 140mm, but the name of the product and the box details pictured say 120mm, is it 120mm or 140mm
Answer:	The F12s are 120 mm and the F14s are 140mm. Same with the P12s and P14s Not sure why amazon globs them all together to confuse everything. If you want the specs, check the back of the box on the product images. In the charts, amazon has the 140 mm specs listed for the 120 mm fans (i.e., the chart shows the Arctic BioniX F120 is 104 CFM, but that's the number for the BioniX F140. The F120 is actually 69 CFM according to the box.
Question:	Can I place this on the esports cpu
Answer:	Probably you just need somewhere to mount it and somewhere to plug the power cable into your motherboard. If you look at a schematic of your board you can probably find where the plugs for the fan are and if you don't have enough on the board you can get a splitter so you can plug 2 fans on 1 fan power plug (if that makes any sense).
Question:	Can these be used as 4 pin fans
Answer:	Yes, these are 4 pin PWM fans that plug into a 4 pin header on a motherboard. These and all other 3-Phase fans sound more pleasant than regular PWM fans.
Question:	How do these compare to the noctua nf-s12b redux-1200 case fans for high airflow
Answer:	Per the specs of the Arctic Spinning at a full 1800 RPM it is rated to move 117 m³ of air per hour for 13.99$, whereas the NF-S12B redux-1200 PWM moves 100.6 m³ of air per hour 13.95. The arctic fan is around 20 decibels (if you convert .5 sone) and the Noctua is 18.1 decibels. Depending on if you value the extra quiet, or want maximum airflow, those seem to be the seperating points not necessarily on price, but looks are definitely better on the Arctic as well.

Product features

Maximum Quietness, Minimum Vibration

Extremely quiet operation through a specially developed motor ensures long sessions without annoying noise. ARCTIC's motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field.

200 to 1800 RPM

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F120 fan speed can be controlled synchronously with all your other fans together and thus keep the noise at a minimum.

Optimised Fan Design

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.

Enhanced Bearing

Due to a unique technology developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• A-RGB FOR FULL COLOUR CONTROL: 12 A-RGB LEDs can be controlled independently of each other; the BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers; incl. A-RGB Controller
• EASY CHAIN VIA CONNECTOR BLOCK: Fan has input and output to pass on light and fan signals; connector block enables this without visible cables
• PRESSURE OPTIMISED: In the development of the BioniX P120 A-RGB particular emphasis was placed on a focused Air Flow and high static pressure 2.1 mm/H2O; this guarantees efficient cooling
• 400 TO 2300 RPM: Wide speed range and PWM Technology allows synchronous fan speed control with all other fans for maximum cooling performance
• TECHNICAL DATA: Fan Speed: 400-2300 RPM, Airflow: 48 CFM/81.55 m³/h, Noise level: 0.45 Sone, Static Pressure: 2.1 mm/H2O, 2x A-RGB Fan 8-pin Connector

User questions & answers

Question:	The p140 is too much because it is not shipped and sold by amazon, like the p120 is. when will you get the p140 shipped and sold from amazon
Answer:	Try NewEgg or FrozenCpu to buy. These are finest fans for money IMHO! Cheers
Question:	What size screws are included. I want to mount on my radiator
Answer:	Only include bright Chrome colored short screws... You would need to use / buy longer screws included with your brand radiator..... Also they would be fine thread as opposed to standard fan to chassis "coarse thread" screws! These are powerful high quality fans for radiator, by the way.
Question:	Does this work for to swap fans from the arctic liquid cooler
Answer:	If you mean the Liquid Freezer, yes. But they're the same fan design that comes with it. Not much point unless you want to add some for push/pull, or want to add/remove RGB fans. They're the best high static pressure fans I've used! Just make sure you're matching 120 with 240/360 rads and 140 with 280 rads (Arctic makes both 120mm and 140mm of these five bladed high pressure fans).
Question:	What's the difference between the bionix p120 and the f
Answer:	F12 has 9 thinner blades and moves more air with no resistance. P12/P12 Bionix have 5 thicker/stronger blades and provide more static pressure(think of it as pushing the air out harder, and to a lesser extent pulling air in harder). Generally, you can always use a comparable static pressure fan(Artic P12, EK vardar, Noctua A12x25), but an airflow focused fan(Artic F12, Noctua S12) will have marginally quieter air noise(the noise of air moving, as opposed to fan motor noise) if you don't restrict it's flow too significantly.

Product features

A-RGB for Full Colour Control

The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting.

Easy installation and extension via Connector Technology

The ARCTIC Bionix P120 A-RGB have two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.

*all necessary cables are included

High-quality plain bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

Optimised for static pressure

During the development of the new BioniX P120 A-RGB, special emphasis was placed on a focused airstream and thus a high static pressure. The fan offers extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 A-RGB is particularly suitable for use on covered case vents or inlets with filters.

Size & Weight

Lenght: 120 mm

Width: 120 mm

Height: 30 mm

Weight: 213 g

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• OPTIMISED FOR STATIC PRESSURE: Fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators
• 200 TO 1700 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors
• EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA: Fan speed: 200–1700 RPM, Airflow: 72.8 CFM/123.76 m³/h (@ 1700 RPM), Noise Level: 0.3 Sone (@ 1700 RPM), Pin: 4-pin

User questions & answers

Question:	How many p14 fans can i daisychain together with pst to 1 motherboard 4-pin
Answer:	Ultimately it would depend on particular motherboard max amperage per 4 pin output compared to total fan amperage load. In reality, 3 120mm, (or) 2 140mm +1 120mm combinations I have down with no problems with a Gigabyte B450 Aorus board. If you need more fans on one header than that, better to get a case with better airflow!
Question:	Is it safe to daisy chain these with different size arctic pwm pst fans? I'd assume not, but thought I'd ask
Answer:	daisy chaining in general is not a good idea, as motherboard might get fried. Use Arctic PWM hub! ;)
Question:	Can you confirm that this is the 4 pin version? thanks
Answer:	yes
Question:	What power connector does this use
Answer:	Standard 3-pin fan connector.

Product features

Optimised for Static Pressure

During the development of the P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring, which allows the P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

200 to 1700 RPM regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High Quality Bearing

Thanks to a unique technology developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Product description

• Fan: 120 mm, 200 - 1.800 RPM (Controlled by PWM)
• Air Flow: 56.3 CFM / 95.65 m³/h (@ 1.800 RPM)
• Noise Level: 0.3 Sone (@ 1.800 RPM)
• Static Pressure: 2.2 mm H2O (@ 1.800 RPM)
• Typical Voltage: + 12 V DC
• Start-up Voltage: 3.9 V DC
• Cable Length: 400 mm
• Sub PST Cable Length: 50 mm
• Motherboard:  + 12 V DC, PWM control signal, 4-pin connector + 4-pin socket

• 120 mm, 200 - 1.800 RPM
• 56.3 CFM / 95.65 m³/h
• 0.3 Sone (@ 1.800 RPM)

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• PERFECT CASE FAN REGULATION WITH PWM: The PWM function allows the motherboard to run the fan precisely at its necessary speed, this guarantees the required cooling and minimizes the noise level
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 300–2000 RPM, Airflow: 31 CFM/52.7 m³/h (@ 2000 RPM), Noise Level: 0.3 Sone (@ 2000 RPM), Pin: 4-pin

User questions & answers

Question:	would this fit on a dell 8100 xps desktop i7 chip set
Answer:	Hi,Dell has its own plug form factor. This fan doesnt fit.Best regards,Jens
Question:	can this be run with two pin? I'm looking for a 3D printer replacement, and the current fan only has two pins, which I assume is ground and voltage
Answer:	All PC fans will work with just power and voltage as far as I'm aware - the other two pins are for reporting the speed back to the user and PWM speed control. That said, it might help to confirm the voltage provided by the printer; if it's lower than 12V, you may get better results with a 3-pin fan rated for 5V-12V operation.
Question:	How long is the cable
Answer:	According to Arctic, the cable length is 400 mm (15.7"). I forgot to measure it before I installed them, but if I recall correctly the usable length (from edge of fan box) of this cable to be closer to 12". In addition to this main cable (fan-to-header), there is a ~2" PST cable that is used for chaining the fans together. It originates from the same header connection point as the main cable.
Question:	without running the fan, which way does the air blow
Answer:	Without running the fan, the air goes nowhere

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life

Perfect Case Fan Regulation with PWM

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Innovative Design Enables Quiet and Efficient Ventilation

The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Two Way Installation

Blow warm air out of the case, draw cool air into your case.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• NEW FAN DESIGN: The BioniX P140, specially optimized for static pressure, has a newly developed fan design and is particularly suitable for use on heat sinks, radiators, pinholes, filters
• 200 TO 1950 RPM: The wide speed range and PWM sharing technology (PST) enable synchronous control of the fan speed with all other fans
• MAXIMUM QUIET RUN: The motor of the P-fan generates only 5% of the commutation vibrations of a conventional DC motor, thanks to the even distribution of force, there is no need for a rubber buffer
• EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA: Fan speed: 200–1950 RPM, Airflow: 77,6 CFM/131.92 m³/h (@ 1950 RPM), Noise Level: 0.45 Sone (@ 1950 RPM), Pin: 4-pin

User questions & answers

Question:	Is there a separate power supply available
Answer:	a separate power supply? For what? Fan itself connect right into standard motherboard fan 4-pin power header.But with PWM sharing Artctic add an extra connector, in package. So fan being able to be daisy-chained, with multiple fans controlled by a single motherboard PWM fan header.
Question:	Would the p140 be suitable for push/pull? Or P140 push, F140 pull
Answer:	Yes, Im using mine for push pull and works fine.
Question:	static pressure rating
Answer:	https://www.arctic.ac/us_en/bionix-p140.html 2.85 mm H2O (@ 1.950 RPM)
Question:	How do these compare to the Arctic p14 as a case fan
Answer:	they are pretty good and fairly quiet i actually recommend these more for cases that use dust filters because of static pressure

Product features

Optimised for Static Pressure

During the development of the BioniX P140, special emphasis was placed on a focused airstream and thus a high static pressure. The BioniX P140 is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring, which allows the BioniX P140 to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

200 to 1950 RPM regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High Quality Bearing

Thanks to a unique technology developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• LOW TEMPERATURE: Bionix gaming fans last four times longer thanks to the low temperature of the coil, therefore, we extend the warranty to 10 years
• 200 TO 1800 RPM: With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F120 fan speed can be controlled synchronously with all your other fans together
• PWM SHARING TECHNOLOGY (PST) LESS NOISE: The PST ensures that all your fans listen to a single control signal, stop at low load, turn whenever necessary
• OPTIMISED FAN DESIGN: We have further optimised fan blade design for higher airflow with reduced noise
• TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 69 CFM/117 m³/h (@ 1800 RPM), Noise Level: 0.5 Sone (@ 1800 RPM), Pin: 4-pin

User questions & answers

Question:	What's the difference between the bionix p120 and the f
Answer:	P120 Optimized for Static Pressure. It more useful as CPU heatsink fan, where airflow has a resistance, as well on radiators for water cooling systems.It better saves energy and lowers the coil temperature without compromising the performance. F120 more for any widely general use inside a case.
Question:	how long are the wires
Answer:	Cable Length: 400 mm / Sub PST Cable Length: 50 mm
Question:	which series is the airflow variant
Answer:	This series is the airflow variant. Not static pressure.
Question:	I want to buy 4 of these for a build but I don’t know if I need cable splitters
Answer:	You don't need a cable splitter. Its got a daisy chain built in.

Product features

Maximum Quietness, Minimum Vibration

Extremely quiet operation through a specially developed motor ensures long sessions without annoying noise. ARCTIC's motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field.

200 to 1800 RPM

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F120 fan speed can be controlled synchronously with all your other fans together and thus keep the noise at a minimum.

Optimised Fan Design

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.

Enhanced Bearing

Due to a unique technology developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• PERFECT CASE FAN REGULATION WITH PWM: The PWM function allows the motherboard to run the fan precisely at its necessary speed, this guarantees the required cooling and minimizes the noise level
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 150–1800 RPM, Airflow: 43 CFM/73.1 m³/h (@ 1800 RPM), Noise Level: 0.4 Sone (@ 1800 RPM), Pin: 4-pin

User questions & answers

Question:	What kind of connector? 2 pin? is this 12v? how many amps
Answer:	4-pin, official product page: https://www.arctic.ac/eu_en/arctic-f9-pro-pwm.html
Question:	What is the max RPM of the 90mm (92?) connected directly to 12v
Answer:	1000 RPM.
Question:	How many amps will the f9 silent draw? same question for the f9 standard. assume 12vdc. thanks
Answer:	Please refer to the official product page for the information: https://www.arctic.ac/eu_en/f9-silent.html#techspecs
Question:	Does the fan turn off below 32C or just slow down to ~500rpm
Answer:	It will stay at ~500 RPM below 32C.

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life

Perfect Case Fan Regulation with PWM

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Innovative Design Enables Quiet and Efficient Ventilation

The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Two Way Installation

Blow warm air out of the case, draw cool air into your case.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• IMPROVED HEAT DISSIPATION: Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports
• FOR HIGH-END CPU: The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but is right where the processor DIE is and covers even the largest versions (18 core)
• EASY INSTALLATION & SECURE HOLD: Fast and easy to install, the mounting system of the Freezer 34 eSports is compatible with Intel and AMD sockets, thanks to a backplate and its low weight it's also transport safe
• OPTIMAL RAM COMPATIBILITY: Thanks to the compact dimensions (124 x 157 x 88 mm), there are no restrictions when using RAM modules, even RAM modules with larger heat sinks can be mounted without any issues
• COMPATIBILITY: Freezer 34 eSports is compatible with the Intel Sockets: 2066, 2011(-3), 1155, 1151, 1150, 1200 and AMD Socket: AM4* *If you are experiencing AM4 assembly problems, please stop and visit our FAQ.

User questions & answers

Question:	What is the difference between the 34 and 33 esports? Do both use pre-existing mount holes for AM
Answer:	The fans are different.
Question:	Will this fit in the q300l case by cooler master
Answer:	Yes , it does fit, I put it in my q300l. However, I have 2 140mm fans in the front which made me put the io on the top of the case, and when I went to install the cooler, I needed to move the front io to the bottom of the case. Besides that theres no issue.
Question:	Can i change the fans and put whichever one i want
Answer:	yes
Question:	Does this come with an extra fan mounting clip
Answer:	No the single fan version only has clips for one fan. I purchased the duo version that came with 2 fans. Extremely quiet cooler and excellent cooling on my Ryzen 2700.

Product features

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports.

Thermal Coating

A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heatpipes this leads to an optimised heat-dissipation and to an increased cooling performance.

High Performance for High-End CPU

The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

Size & Weight

Lenght: 88 mm

Width: 124 mm

Height: 157 mm

Weight: 627 g

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• IMPROVED HEAT DISSIPATION: Evenly spread direct-touch heat pipes and an optimised heatsink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34
• HIGH PERFORMANCE FOR HIGH-END CPU: The contact surface of the Freezer 34 heat pipes doesn't cover the full heat spreader, but is right where the processor DIE is and covers even the largest versions (18 core)
• EASY INSTALLATION & SECURE HOLD: Fast and easy to install, the mounting system of the Freezer 34 is compatible with Intel and AMD sockets. Thanks to a back plate and its low weight it's also transport safe
• OPTIMAL RAM COMPATIBILITY: Thanks to the compact dimensions (124 mm x 157 mm x 86 mm), there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues
• COMPATIBILITY: The Freezer 34 is compatible with the Intel Sockets: 2066, 2011(-3), 1155, 1151, 1150, 1200 and AMD: AM4* *If you are experiencing AM4 assembly problems, please stop and visit our FAQ

User questions & answers

Question:	What is the difference between a arctic freezer 33 co and a arctic freezer i32 co? If the difference in price is considerable
Answer:	The Freezer 33 CO supports AMD AM4 Socket but Freezer i32 CO doesn't.
Question:	will this fit Dell XPS
Answer:	If the width of your chassis is not 21cm or 8-3/8" Minimum, then NO NO NO! Other than that, Yes.
Question:	Does this come with any thermal paste
Answer:	Yes it does. No need to buy any.
Question:	Will this fix in a supermicro x10dri lga 2011-v3 narrow ilm socket
Answer:	No

Product features

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34.

High Performance for High-End CPU

The contact surface of the Freezer 34 heatpipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

Easy Installation & Secure Hold

Fast and easy to install and extremely reliable, the different mounting systems are compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 is not only foolproof to install, but also absolutely transport safe.

Size & Weight

Lenght: 86 mm

Width: 124 mm

Height: 157 mm

Weight: 605 g