12 best cooling fans for pcs
Cooling fans for PCs play a crucial role in maintaining optimal temperatures within a computer case. They are part of the internal components and are vital for keeping the CPU, GPU, and other components from overheating. Here's what you should know about them:
Purpose: Cooling fans are designed to dissipate heat generated by internal components, such as the CPU and GPU.They help maintain safe operating temperatures, preventing thermal throttling and potential damage to sensitive hardware.
Types:
- Case Fans: These are typically installed on the front, rear, or sides of the computer case. They provide general airflow to keep the overall temperature inside the case down.
- CPU Cooler Fans: Often included with aftermarket CPU coolers, these fans are specifically designed to cool the CPU.
- GPU Fans: Graphics cards have their own fans to cool the GPU. Some high-end GPUs have multiple fans.
- Liquid Cooling Fans: In liquid cooling setups, fans are used to dissipate heat from the radiator.
Sizes: Cooling fans come in various sizes, with 120mm and 140mm being common for case fans. CPU cooler fans can be smaller, and some cases support larger fans, such as 200mm.
Airflow Direction: Fans can either be intake or exhaust. Intake fans bring cool air into the case, while exhaust fans expel hot air. Proper placement and configuration of these fans can optimize airflow within the case.
RPM (Revolutions Per Minute): Fan speed is measured in RPM. Higher RPM fans can move more air but might be noisier. Many fans have adjustable RPM settings to balance between cooling performance and noise levels.
Noise Levels: Noise is an important factor to consider. Quieter fans are preferred for HTPCs or quiet office environments, while high-performance gaming PCs may prioritize cooling over noise.
Bearings: Fans can use different types of bearings, such as sleeve bearings, ball bearings, or fluid dynamic bearings. These affect the fan's lifespan and noise level.
RGB and Aesthetics: Some fans come with RGB lighting to enhance the visual appeal of your PC build. You can synchronize lighting effects with other components for a unified look.
PWM (Pulse Width Modulation): PWM fans allow for precise control over fan speed, adjusting it according to temperature fluctuations, which can help maintain a consistent and quiet cooling performance.
Cleaning and Maintenance: Regularly cleaning dust from fans and their surroundings is essential to maintain efficient cooling. Dust buildup can reduce airflow and cooling efficiency.
When choosing cooling fans for your PC, it's important to consider your specific hardware, case layout, cooling needs, and noise tolerance. Proper fan configuration and maintenance are essential for a well-functioning and long-lasting PC.
Below you can find our editor's choice of the best cooling fans for pcs on the market- High performance cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1700 RPM, max. 25.1 dB(A), >150,000 h MTTF
- Renowned NF-P12 high-end 120x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation
- 1700rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
User questions & answers
Question: | Does this come with a molex connector |
Answer: | No |
Question: | Will the pwm control on this fan stop it completely even with power to +12v/gnd |
Answer: | I bought this as an accessory to the ring and my daughter said the bigger guys worked well. Sorry that's not more help. I think their figures were the 3" or 4" ones. |
Question: | Is this an airflow fan or a static pressure fan |
Answer: | They do break apart but are easily able to be put back together |
Question: | How many cfm, or cubic feet per minute |
Answer: | They're 6 inches |
Product features
Proven NF-P12 design
Tens of thousands of quiet cooling enthusiasts around the globe swear by Noctua's classic NF-P12. Thanks to its impressive quietness, excellent performance and impeccable quality, the NF-P12 has become an established reference for quiet 120mm fans.
Pressure-optimised Nine-Blade Design
Specifically developed for high-impedance applications such as CPU coolers, water-cooling radiators or cases with tight fan grills, the NF-P12's nine-blade impeller provides outstanding pressure and airflow performance.
SSO-Bearing
Combining the proven concept of hydrodynamic bearing with an additional magnet that supports the self-stabilisation of the rotor axis, Noctua's time-tested technology has become synonymous with supremely quiet operation and exceptional long-term stability.
Vortex-Control Notches
Noctua's signature Vortex-Control Notches split up trailing edge vortices and thus spread the fan's noise emission over a wider range of frequencies. This measure makes the fan sound more pleasant to the human ear.
Colour-customisable with NA-SAVP1 anti-vibration pads
The fan’s frame can be outfitted with Noctua’s chromax line NA-SAVP1 anti-vibration pads. Available in black, red, blue, white, green and yellow, these pads not only damp minute vibrations but also allow the fan to be colour-customised in order to coordinate it with popular build colour schemes!
- Higher air flow to enhance cooling performance
- Economic solution for perfect performance
- RoHS compliance for protecting the environment
- 3 IN 1 Value Pack
- Ultra silent operation at 19 dBA
User questions & answers
Question: | are these at the fasted speed connected to the molex |
Answer: | The fan has an arrow on it show the direction of the air flow. They can be mounted to blow out of or into the case. |
Question: | do these need to use the molex power connector |
Answer: | My take on these fans is vendor quality, as for air flow, that depends in part on your case. |
Question: | pin connection |
Answer: | Not right off, it’s just the standard screw size |
Question: | Do the fans come with screws? Cause I dont have any |
Answer: | 12v |
Product features
Product description
- Product Size: 120 * 120 * 25mm
- Pitch: 10.5cm
- Rated voltage: 12V
- Current: 0.12A
- Input power: 1.44W
- Speed: 1200RPM (constant speed)
- Air volume: 38CFM
- Static pressure: 58Pa
- Noise: 19DB
- Weight: 130g
- This EC axial fan consume very less power & better efficiency than AC equivalent.
- Designed for projects that requires cooling or ventilation; or as a replacement fan for various products.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright
- Package include: 1 Piece fan include fan grill and mounting screws & nuts; 2* leadwires(about 38 inches); 1* Power Plug
- 80 x 80 x 25 mm ( 3.14 x 3.14 x 1 in. ) | Rated Voltage :90V to 270V | Airflow: 43.6 ±10%CFM | Power: 2W | Speed: 2800 RPM
User questions & answers
Question: | Is this waterproof, and can it be connected to a solar panel |
Answer: | Hi kfab12, Thank you for your inquiry. Here is a link to our Speed Controller on Amazon: http://www.amazon.com/dp/B00809BQZGPlease let me know if there are any questions or concerns and I'll be happy to help. Thank you and have a great day!Kind regards,Bernard M.AC Infinity |
Question: | What's the maximum Static Pressure this fan can produce |
Answer: | I see no reason why you could not mount this fan in any position you want. It has completely sealed bearings and this would allow any position mounting. |
Question: | Which face of the fan blows the air? Is it the stickered side or the non-stickered side |
Answer: | By golly, that's exactly how I use it. I installed it in my desk's computer compartment with a typical dining room lamp dimmer dial/switch to control the speed. At full speed it's a little louder than I like, but it's quite tolerable at the lower speeds. It does a nice job, though, producing plenty of circulation to keep my over-powered CPU from overheating. |
Question: | Can this be used as a replacement fan for a tanning bed |
Answer: | Yes I know the muffin fan..... the muffin fan....the muffin fan. Yes I know the muffin fan, who lives on the best fan out there way. |
Product features
Durable plastic material
- The EC fan can work in the 70V - 270V voltage range, such as work under on 110V, 120V, 220V, 240V ,the fan speed are the same.
Dual-Ball Motors
- Dual-ball bearings rated at up to 67,000 hours allows the fans to be mounted flat or upright.
Fan Filter
- Protect your fingers, and keep fan blade without damage ; wear-resistant and not easy to break.
Components
- Plug :The power plug needs to be connected to the fan cable, and then into it a wall outlet to start the fan . 59 inch.
- Wiring head :Connect fan cable and extension cable.
- Ultra-quiet UL-certified USB fans designed to cool various electronics and components.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
- Dimensions: 3.2 x 3.2 x 1 in. per fan | Total Airflow: 52 CFM | Total Noise: 18 dBA | Bearings: Dual Ball
User questions & answers
Question: | How long is the usb cable |
Answer: | the one I ordered did not |
Question: | Since linking addition fans would have the same USB plug, how are you going to connect identical connections together |
Answer: | Yes, the LED stays on as long as the PC is on. If there is still power the LED will also stay on. Any questions or concerns please contact us at [email protected]. Thank you. |
Question: | Will the ac infinity turbo fan power adapter, for multifan series usb fans. work for these fans its 6v 2000ma |
Answer: | Under 5watts, so, 0.2amps or so. Can't tell you startup spike, but, its low power. My meter can't detect under 1amp accurately :( |
Question: | What is the maximim distance between the two fans |
Answer: | Yes it does. I have the 600t in white, this fan fits perfectly to replace the top exhaust fan. In terms of replacing the front intake fan it works but not like the oem fan due to the screw holes being on the side they are on. All you need to make it work are longer screws that can reach the screw holes on the fan. |
Product features
Multi-Speed Controller
Inline switch enables you to optimize fan speed for various applications. Can be powered through USB ports found behind AV electronics and consoles.
Ultra-Quiet Fans
Designed to maximize airflow CFM to noise dBA ratio. Dual-ball bearings rated at 67,000 hours allows the fans to be laid flat or stand upright.
Quality Approved
Contains UL recognized axial fans under #E503903 in 2018 by Underwriter Laboratories. Archived in UL Online Certifications Directory.
Silicone Rubber Feet
Absorbs noise and surface friction caused by fan vibrations. Unused pieces can be detached to reduce overall height for tight spaces.
- Cool RGB Light: GIM RGB case fans allow you to enjoy the beautiful and cool RGB lighting effects in 16.8 million colors, provide excellent heat dissipation, add fun and bring you better gaming experience.
- 3 Music Modes: To further optimize your gaming experience, the fans are designed with 3 different music modes and each music mode has it’s own lighting mode, which creates awesome visual and audio effects and help you play games in high spirits.
- RF Wireless Remote: A wireless control is included for convenience and easier operation. By only one key, you can easily adjust fan speed (S/M/H)/ lighting effects/ brightness/ LED speed without opening the case.
- Synchronizable RGB Lighting via Motherboard: It allows you to control fan lighting with 5V addressable RGB motherboards. Compatible with motherboard software includes US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, etc.
- No Risk to Purchase: Any quality issue with your fans, please feel free to contact us and let us know. We will try our best to help you! GIM strives to bring the best customer service!
User questions & answers
Question: | Can i use this hub with other gim fans |
Answer: | Not sure what your asking if you mean the size of the plug I don’t no the measurements |
Question: | Is there a way to keep the fan lighting on Rainbow mode? The menu/auto button shows it at the start but then it cycles through all the other modes |
Answer: | Dario has two types of meters, one specially designed for iso (iPhone) devices and another designed for android devices. |
Question: | I have a question, i bought two of these 3 packs but used only one hub and the rgb flickers and the fan works? how do i fix the rgb |
Answer: | The plans seem to be different depending on when/where you subscribe. All the plans now seem to be unlimited strips with any plan.. Within the app, $20/mo billed annually gets a new meter every 2 years. In the website $25/mo billed annually with free meter.. Giving it a try, first few readings agree with my regular meter within a couple of points. |
Question: | How do i make the rgb controller sync with asus aura |
Answer: | yes |
Product features
What can GIM RGB case fans bring for you?
Synchronizable RGB lighting via motherboard
Sync ready with all mobo houses including Gigabytes, Asus and MSI
Extreme Cooling Performance
33.5 CFM, GIM Fan optimized heat dissipation and hydraulic bearing to ensure ultra-quiet operation
Smart Music Modes
With built-in high sensitive sound sensor, this fans can change different lighting modes with the rhythm of music, make you enjoy the feast of sight and hearing when you play intense computer games playing or listen to any music with strong rhythm.
New Blade Design
Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.
Specifications:
Fan Dimension: 120mm(W) x 120mm(D) x 25mm(H)
Fan Speed: 0-1300
Rated Current: 0.35A
Noise Level: 0-15 dBA
Rated Voltage: DC 12V(fan) / 5V(LED)
Power Input: 1.92W
Lifetime: 20000 Hrs
Controller Connector: 6 PIN(for fan),2*4 PIN(for LED strip)
Package Contents:
3 x 120mm Cooling Fan
12 x Mounting Screws
1 x Controller
1 x Remote
1 x SYNC Cable
- 【Intelligent Speed Control】3 ×120mm full function PWM silent fans adopt wolf claw bionic design helps wind diversion to increase air convection efficiency and greatly improve heat dissipation. Stable operation and reduce noise. The intelligent temperature control mute module controls the speed at 1000~2000±10% RPM.
- 【Multi-mode Light Effect】Monochrome glow, monochrome change and rainbow effect.Each fan is equipped with 8 ARGB LED beads, 6 colors and 10 light effect modes.One click to change the RGB color.Provide complete lighting for your computer.Through the control box or motherboard software control to create your own unique case lighting effects.
- 【Motherboard Synchronization & Controller】The motherboard software synchronization mode, build your own light effect control system. Support ASUS, Gigabyte, MSI main software synchronization control (Gigabyte motherboards need RGB adapter cable/includeded). Support FRGB controller and FRGB SYNC motherboard (+5V/3 PIN pin) software to synchronize two lighting control methods.
- 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case.
- 【Top Bearing Technology】 Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs.Suitable for CPU cooler and support 120/240/360 mm liquid cooler.(case /GPU etc) Tips: If you want to connect a 12V motherboard, please use the controller to control the fan light. Then connect the controller to the power supply.
User questions & answers
Question: | Can i connect six fans to a single "addressable gen 2 rgb header"? will i have what i need by purchasing two 3-in-1 kits or a 5-in-1 kit + single fan |
Answer: | For two 3-in-1 kits (5V 3 pin ARGB connector), if you connect the included 1-to-4 RGB bifurcate cables to your motherboard, it needs 2 motherboard standard 5V 3 pin ARGB headers. For 5-in-1 kit + single fan (5V 4 pin ARGB connector), connect the 6 fans ARGB connectors to the RGB control box (it has 7 RGB ports, from RGB1 to RGB 7). There are 12V 4 pin RGB sync cable and 5V 3 pin ARGB sync cable that connect to your motherboard. 3-in-1 kit and 5-in-1 kit fan's ARGB connectors are different. |
Question: | Why can't the fan I bought shine |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Regarding fan RGB connection, please connect the 4-pin 5V ARGB connectors of all fans to the control box one by one (from RGB1 to RGB7 ports). To avoid reverse connection, please strictly follow the instructions when inserting the connector into the control box. |
Question: | How many blades are there? How effective is the heat dissipation |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time --:- Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Nine fan blades and surface airflow guide grooves are used to process a large amount of air and concentrate the wind on the leading edge of the blade to achieve higher wind pressure and a quieter state. The 3×120mm full-featured PWM silent fan adopts wolf claw bionic design, which helps to divert flow, improve air conv… see more Nine fan blades and surface airflow guide grooves are used to process a large amount of air and concentrate the wind on the leading edge of the blade to achieve higher wind pressure and a quieter state. The 3×120mm full-featured PWM silent fan adopts wolf claw bionic design, which helps to divert flow, improve air convection efficiency and greatly improve heat dissipation efficiency. Stable operation and reduce noise. The intelligent temperature control mute module controls the speed at 1000~2000±10% RPM. see less Nine fan blades and surface airflow guide grooves are used to process a large amount of air and concentrate the wind on the leading edge of the blade to achieve higher wind pressure and a quieter state. The 3×120mm full-featured PWM silent fan adopts wolf claw bionic design, which helps to divert flow, improve air convection efficiency and greatly improve heat dissipation efficiency. Stable operation and reduce noise. The intelligent temperature control mute module controls the speed at 1000~2000±10% RPM. |
Question: | What are the lighting modes |
Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } 10 lighting modes, such as: flowing color: floating color like fluid circulation, flowing overflow color. Multi-color mixing: six colors are illuminated at the same time, and rotate in a circular motion and continue to flow and chase. Overlay: The first light of a single color is lit, and then the second light graduall… see more 10 lighting modes, such as: flowing color: floating color like fluid circulation, flowing overflow color. Multi-color mixing: six colors are illuminated at the same time, and rotate in a circular motion and continue to flow and chase. Overlay: The first light of a single color is lit, and then the second light gradually covers the first light color from the left and right. Color mixing chase: Overlap the first color with the third color until the end of the stack of six colors, and then loop around the entire aperture. see less 10 lighting modes, such as: flowing color: floating color like fluid circulation, flowing overflow color. Multi-color mixing: six colors are illuminated at the same time, and rotate in a circular motion and continue to flow and chase. Overlay: The first light of a single color is lit, and then the second light gradually covers the first light color from the left and right. Color mixing chase: Overlap the first color with the third color until the end of the stack of six colors, and then loop around the entire aperture. |
Product features
PC-3M120 HALO DAWN SERIES
RGB Version:AURA 5V 3Pin addressable
Fan Dimension:120×120×25mm
Fan Speed:1000~2000±10%RPM
Max. Air Flow:72CFM
Noise:8~29.1dB(A)
Rated Voltage:12VDC
Rated Current:0.22~0.39A(Fan Moto)+0.3A(RGB)
Bearing Type:Hydraulic Bearing
Double-sided Silicone
The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads which can make the internal operation of the computer case stably and reduce the noise output.
SilentPro 9 Fan Blades
9 fan blades and the surface airflow guide groove is used to process a large amount of air and concentrate the wind on the leading edge of the blade for higher wind pressure and quieter.
Hydraulic Bearing Technology
Hydraulic bearing with longer service life to reduce noise/oil overflow and improve heat dissipation efficiency. Life expectancy can exceed 30,000 hours.
- The standard 120mm computer case fan, compatible with the different types of chassis. High-performance fan for the CPU heatsink and water cooling system.
- The design is user friendly interface: a 3pin 4pin two interface design, compatible with any motherboard, power supply plug or other devices.
- Super Silent PC Heat Sink: all copper motor and rugged. hydraulic press bearings with self-lubricating antifriction material, reduce operating noise, improve efficiency, and run the noise less than 25 decibels.
- High-speed and high-brightness LED design, easy to install and improve airflow to maximize airflow for High capacity cooling, let your PC more durable.
- The quality assurance: If you have any questions, please contact us. The quality of our products, and will do our utmost to quickly and efficiently resolve your issue.
User questions & answers
Question: | Does the wire harness include standard wall outlet cord |
Answer: | Hello, there are only two interfaces: computer power interface and motherboard fan interface. Does not include USB interface and wall outlet interface. |
Question: | Can you change the colors from the motherboard when plugged in |
Answer: | Hello, this fan is fixed color, can't change color. |
Question: | I plugged the fans into a working fan header and the lights turn on without the fans spinning. How do I fix this issue |
Answer: | hello,The working voltage of the fan is 12v, please help connect the 3pin port of the fan to the sys_fan port of the motherboard (note: only use the 3pin port during the test, do not use the 4pin port). If the problem is still not resolved, please let us know and we will solve the problem for you in other ways. Thank you |
Question: | The screws seem too thick for the fan. The holes are not or threaded. When securing most of the screws cracked the holes |
Answer: | Hello, we provide self-tapping screws, which will have threads after being screwed in. These screws will not cause the screw holes to break, Please rest assured. If there are any problems during installation, please let us know. |
Product features
Specifications:
Fan Size : 120mm*120mm*25mm / 4.7in*4.7in*1in
Speed : 1200RPM±10%
Input Voltage : DC12V
Current (Ampere): 0.25A
Input (Watt): 3.0W +/- 10%
Bearing Type : Hydraulic Bearing
Noise : <30dB
Connector : big 4 Pin & 3 Pin
Cable length: 30cm / 11.8in
Superior RGB LED illumination effect
The Conisy AL-120 LED case fan boasts 32 independent RGB LEDs light to create vibrant lighting and visual effects.Elegant and soften blue lighted effects perfect match your PC's theme.
Hydraulic Bearing Design
The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The seal cap prevents leakage of the lubricant, and improves the lifespan of the unit, service life of more than 30,000 hours.
Created for Quiet
Unique 9 blades design is engineered to generate higher airflow without compromising on ultra-silent operation.Ultra-thin fan blades ensure less vibration, noise and turbulence.
Silent operation as an excellent choice for case cooling.
Two way installation:
Blow warm air out of the case. Draw cool air into your case.
They are ideal for mounting at the rear or top of your PC case as exhaust fans for your PC's motherboard and CPU, graphics accelerators, and other components that fill the case with heat.
and They are ideal for mounting at the front or bottom of your PC case as intakes fans.
Compatible:
3-pin power connector for powered by motherboard
IDE 4-pin power connector for powered by PSU power supply
IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.
Support multiple fans through IDE 4-pin Concatenation.
Product description
Sahara is a brand fulfilled with pc modding experience with their own unique design concepts.
After research the real needs of the pc modding, Sahara has now launched "Case Fan" product series. And we will keep publishing LED, RGB and ARGB fans that fit PC DIYer's requirments.
For more future informations follow us and we will keep surprising you!!!
- 🎮Economic solution for perfect performance
- 🎮Higher air flow to enhance cooling performance
- 🎮Keep your system cool with powerful fan speeds up to 1 100 RPM pushing up to 46.18 CFM of air, Sound Level - 24.16 dBA. Static Pressure - 1.12 mm-H2O
- 🎮Easy to Install: Support 3pin interface to connect to the motherboard, and also support the molex interface to connect to the power supply to reduce the difficulty of connecting to the motherboard
- 🎮No Risk to Purchase: Any quality issue with your fans, please feel free to contact us and let us know. We will try our best to help you! strives to bring the best customer service!
Product description
Conisy FL-R1 series case fan comes with reliable, stable performance and gorgeous vibrant style.Beautiful LED illumination,gives you bright and dreamlike visual experience. Specification: Size: 120*120*25mm(4.7*4.7*1.0 inches) Screw hole Pitch: 10.5cm Speed: 1200(±10%)RPM Noise: 23.5dBA Air volume: 48CFM Bearing: Hydro bearing Rated voltage: 12V Current: 0.21A Lifetime: 20000Hrs LED Color: green Cable length: 30cm / 11.8in Interface: 1*3PIN + 1* D-Type 4Pin Features: 1.Vibrant lighting and visual effects Superior RGB LED illumination provides elegant and soften light effects,you can feel the flow with full color fun, and perfect match your PC's theme. 2.That cools your system in silence A mix of perfectly crafted 9-blade fan design and sound absorbing rubber pads that cools your system in silence. Peace and quiet even when your PC is working overtime. 3.Multiple personalizations options: The FL-R1 series includes six versions to choose from: RGB, blue LEDs, red LEDs, green LEDs, Ice blue LEDs and Pink LEDs. Instructions: · 3-pin power connector for powered by motherboard · IDE 4-pin power connector for powered by PSU power supply · Support multiple fans through IDE 4-pin Concatenation. · TWO WAY INSTALLATION: Blow warm air out of the case. Draw cool air into your case. Package include: 2 x 12cm LED PC Case Fan 8 x Mounting Screws IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.
- Soft and bright visual experience:The Conisy LED PC Case Fan Shows Horgeous and Vivid Visual Effect.which will make your PC case cooler and stand your own personality.
- Wide Compatibility:Standard 120mm size,Compatible with all types of chassis,Suitable for PC air cooling fan and water cooling radiator.
- Silent Cooling and Long Service Life:Advanced Hydraulic Bearing for reliable, quiet operation.service life of more than 20,000 hours.
- Worry-free Choice:Easy to install, use and maintain.Compatible 3-pin connector for mainboard and power supply that also works with 4-pin headers.
- Delivery: 2pcs Conisy 120mm LED PC Fan.The quality assurance: If you have any questions, please contact us.product quality problems, 180 days replacement. We will do our utmost to quickly and efficiently resolve your issue.
User questions & answers
Question: | Fan lights up but will not spin tried 3 pin motherboard connector and then separately with power supply |
Answer: | Hello,Please press firmly on the middle of the fan, the fan blade may be loose. After pressing firmly, try again. If you still have problems, please contact us, we can exchange with you for a new one. |
Question: | Hello, do the lights work with one 12v connection |
Answer: | Hello, it can work with 12v connector. The working voltage of the fan is 12v. |
Question: | Could I use these as a cpu cooler |
Answer: | Hello, it needs to be used with a water cooling system to be used as a CPU fan. It cannot be used directly as a CPU fan. We have a very beautiful LED CPU fan which is expected to be available next month.Thanks |
Question: | My led will light up when i first start up the pc then they shut off (led only problem) can i fix this somehow |
Answer: | Hello, When the motherboard is used for power supply, if the automatic frequency reduction is set on the motherboard, the LED light will not turn on due to insufficient voltage. (Some motherboards will default to automatic frequency reduction) Solution 1: Enter the motherboard BIOS, find the case fan interface, and turn on full-speed mode. Solution 2: Power directly through the large 4Pin port, not through the motherboard. Please try one of these two methods first. If you still have problems, please let us know, thank you. |
- Trusted Premium Brand : 18-month manufacturer's warranty and Professional Customer Service Assistance.
- Silent Case Fan:The impeller was designed with a focus on minimzing the noise level (21.5 dBA) yet delivering the superior airflow (30.5 CFM) and pressure (0.65 mmH2O)
- Highly Efficient Ventilation : The destinctive design on the back end of the fan blades providing highly efficient ventilation (1000 RPM)
- High Quality Fan Blade :Designed with 7 blades to provide high airflow (30.5CFM), good cooling capacity.
- Package:(1)PF 120mm Case Fans *5;(2)1 to 3 Fan Splitter *2;(3)Screw *20
User questions & answers
Question: | Which way do these fans blow |
Answer: | Approximately 54 CFM. |
Question: | How does this fan differ from the ones posted with a cfm of 50.78 and a static pressure of 1.96mmH |
Answer: | yes they are 12 volt fans. |
Question: | Does anyone know the size of the screw |
Answer: | I did use this fan to replace the EVO 212 stock fan. This fan is pretty close to inaudible at 1000 RPM (goes up to 1500). But the fan does not move as much air as the stock fan. Idle temps are up 2 degrees C, load temps are up almost 10 degrees C. If your rig is already running hot, this is not the right fan for you. |
Question: | Are these 24 volt |
Answer: | The NF-F12 is a high static pressure fan designed to push airflow against substantial resistance, as with a water-cooling radiator or a heatsink. For a case fan, you're better off with the NF-S12A -- it's both quieter and moves a greater volume of air. |
Question: | How much air does this push in CFM |
Answer: | This does not come with fan hub. Each fan has a molex connector and 3pin motherboard connector. You can daisy chain with molex connectors |
Question: | Just confirming these are 12 volts. Using for a different application |
Answer: | Yes, you should have no problem connecting the 4-pin Molex peripheral connectors on each fan to each other. There is both a male and a female end that you can use to daisy chain them together. |
Question: | Can I use this to replace EVO 212's stock fan (a Cooler Master 120mm which rattled from day one), facing downwards, clipped to the heatsink? Thx |
Answer: | Sleeve bearing fans! |
Question: | Would this be a better case fan then the NF-S12A PWM? I want to mount a fan on my case to blow air on my HDDs |
Answer: | Yes, all our fans come with screws. |
Product features
Heptaperf Impeller
Custom designed for the new Focused Flow frame and to work in tandem with the eleven stator guide vanes, the NF-F12's seven blade Heptaperf impeller has been carefully optimised to achieve a perfect balance between power and quietness.
SSO2 bearing
The NF-F12 is the first fan to feature the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Varying Angular Distance and Vortex Control Notches
The NF-F12's stator guide vanes are set out in Varying Angular Distance and feature Vortex-Control Notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.
Scope of Delivery
- Low-Noise Adapter (L.N.A.)
- 4-Pin Y-Cable
- 30cm Extension Cable
- 4 Vibration-Compensators
- 4 Fan Screws
- Higher air flow to enhance cooling performance
- Economic solution for perfect performance
- RoHS compliance for protecting the environment
- 3 IN 1 Value Pack
- Ultra silent operation at 19 dBA
User questions & answers
Question: | I bought these to put in my RV refrigerator, does anyone know which wire is which |
Answer: | Hi Quentin!Thank you for your inquiry.The overall length of the power cord would be 72 inches (6 feet). The cord between fans would be roughly 30 inches (2.5 feet).We greatly appreciate your interest and consideration in regards to our cooling products!Warm Regards,Tommy KaragiasAC Infinity |
Question: | What are the overall dimensions of each entire component, including thickness/depth? i.e. 120mm+ x 120mm+ x 25mm |
Answer: | Hi T. Campbell!Thank you for your inquiry.Each fan contains a USB female and male connector, which would be the essential tools to "daisy chain", or connect additional fans into the mix.You will be able to connect the male into the female ends to allow you to operate the units in series.With the use of the thermal controller you can operate up to six individual fans in sync with one another.We greatly appreciate you taking the time to contact us directly!Warm Regards,Tommy KaragiasAC Infinity |
Question: | Can you use the smart fan setting where at a certain temperature the fans automatically adjust to the speed using the bios |
Answer: | From the power supply page, the fans will work. Compatibility Designed for MULTIFAN models S1, S2, S3, S4, S5, and S7. AC Infinity AIRPLATE cabinet fans include a turbo wall adapter but can be purchased for replacement purposes. Not compatible with any other USB fans or electronics. |
Question: | My fans light up as dots only on the rim. Occasionally it lights up all the way and then fade back out. Any fix |
Answer: | The distance between the two fans is now 2.5 feet. This applies to fans ordered after Jan 1, 2015. |
Product features
Product description
- Product Size: 120 * 120 * 25mm
- Pitch: 10.5cm
- Rated voltage: 12V
- Current: 0.12A
- Input power: 1.44W
- Speed: 1200RPM (constant speed)
- Air volume: 38CFM
- Static pressure: 58Pa
- Noise: 19DB
- Weight: 130g
Product description
Corsair ML120 delivers unrivaled performance and silence by utilizing magnetic levitation technology and custom rotor design. The innovative design provides both high static pressure and high air flow. Customer Service / Tech support: 1-888-222-4346 opt. 1
- Magnetic Bearing: harnesses magnetic Levitation technology to provide lower noise, higher performance, and a longer lifespan. . Air flow - 75 CFM. Noise level - 35. 0 decibels
- Custom rotor design: Delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environments
- Extensive control range: a 2, 000 RPM control range gives you total control between silence and absolute performance
User questions & answers
Question: | How do you chamge the speed setting |
Answer: | Yes mine came with a rgb controller and 2 fan hubs (4 fans per hub X 2 hubs per kit w/rgb controller). I,m running 6 fans off the mobo and 7 rgb lights using the rgb controller with no trouble. I,m not sure if you can run 9 units as theres only space for 8 fans using the hubs so not sure about running 9? The fan hubs connect to the headers on the mobo and i control the fans using the UEFI/BIOS 1 header so 4 fans all run at the same speed. I,ve had no trouble with this setup and would buy them again. |
Question: | Thoose fans rpm can controllable with corsair h100i v2 from corsair link app |
Answer: | Depends on the item and the area it's being delivered. This is an idiotic question |
Question: | Is this fan 24vdc |
Answer: | Your software used should be able to calibrate & control each color of the fans when connected to the 12v RGB header of the If not, then the software has an issue, as 12v RGB headers pretty much worn the same for all monks, maybe just the color of each pin maybe be different, which the software should have color calibration to correct this. |
Question: | What is the difference between 4 pin and 3 pin connector |
Answer: | RGB plugs of these fans can be daisy chained and the last one can be plugged into motherboard 12V 4-pin RGB header. |
Product features
If NASA Designed a Computer Case Fan – This Would Be It
Corsair ML Series of fans magnetic levitation technology and custom engineered rotors provide unrivaled performance and low noise.
Thanks to its innovative design, the ML Series fans delivers both high static pressure and high air flow for a superior fan experience.
Latest Reviews
View all
Wonder Mats
- Updated: 29.07.2023
- Read reviews

Devacurl Products For Curly Hairs
- Updated: 03.05.2023
- Read reviews

Spray Hair Thickeners
- Updated: 13.03.2023
- Read reviews

Childrens Toilet Training Books
- Updated: 01.03.2023
- Read reviews

Electric Air Hammers
- Updated: 11.05.2023
- Read reviews