13 best electric air hammers

Product description

Ideal for muffler and pipe removal, body shop work, shock work scraping rust, and light front-end work.

• Built in regulator to match speed to the job
• Four round chisels-Include ripper, bolt cutter flat and tapered punch chisels
• Alloyed steel barrel and heat-treated piston for longer life

User questions & answers

Question:	I used it for about 5 minutes and it is just blowing air and not stroking. What is wrong with to
Answer:	Did you try tightening the end where it screws into the green main housing. Also some air oil after prolonged use helps lube everything up.
Question:	does it come with X4 chisels and a needle kit ? Or just the bare gun
Answer:	It comes with the 4 chisels and the spring, no needle kit that I recall.
Question:	Is this powerful enough to hammer out a ball joint
Answer:	Yes but it was a cheap tool only lasted 6 months
Question:	How many blows per minute does the tool operate at? Also how long are the strokes in inches
Answer:	The stroke can be approx.. 1/8 to 1/2 depending on the pressure you exert and I would guess over 1000 strokes per min. [ just my guess]

Product description

This 2200 Watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Since an air compressor is not required, this is one of the most portable jack hammers in the market. Adjustable 360° foregrip provides extra control and comfort during extended use. Our jack hammer is perfect for breaking up concrete, asphalt, mortar, hard clay, rocks, bricks and more! This jack hammer is perfect for home renovations or stone masonry project.

Features:

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Excellent heavy-duty drilling power makes your work more efficient, use it at ease
• It accepts 1-1/8 in. hex shank bits
• Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches and carrying case

Specifications:

• Color: Red
• Power Type: Electric
• Voltage: 110V/60Hz
• Motor Power: 2200 Watts
• Chuck Size: 1-1/8 In.
• Chuck Type: Hex
• No Load Speed: 1900RPM
• Speed: 1800 Impacts Per Minute

Package Contents:

• 2200 Watt Electric Demolition Jack Hammer
• 16" Bull Point Chisel
• 16" Flat Chisel
• Protective Gloves
• Protective Goggles
• Oil Bottle
• 3 x Hex Keys
• Wrench
• Carrying Case with Handle

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches

User questions & answers

Question:	Tool weight=35lb, compared to 70lb for a similar tool with less amperage. Does this result in more handle vibration and less impact force at chisel
Answer:	No you cannot see the whole coin at once which is explained in the listing itself. A magnifying glass would do that but this is for serious up close viewing/ out farthest you can see most of the head on coin or in god we trust etc /but if looking for defects and double strikes this works very well and am happy that I got it....
Question:	does it last ?? is the life of the tools good
Answer:	biggest pixel is 1080 FHD 50-1200 is the magnification
Question:	One reviewer stated this item was 5o lbs but the product description says 35 lbs, which is correct
Answer:	Is not any chemical with the microscope.
Question:	will this accept bosch 1 1/8" bits
Answer:	Yes

Product features

Heavy Duty Electric Demolition Jack hammer

• Durable material and forceful impact provides maximum removal for all day demolition

• Anti-vibration system actively improves users comfortness

• Innovative design offers better weight distribution in both vertical and horizontal applications

• Rotating chisel locks into different positions to optimize work angles

• Speed control allows for various jobs, protection, and maintains constant speeds

Dress Properly

Do not wear loose clothing or jewelry. Rubber gloves and non-skid footwear are recommended.

Plastic Handle

The Plastic handle is designed to prevent users from electricity shock.

Do Not Abuse Cord

Never carry tool by cord or yank it to disconnect from receptacle. Keep cord away from heat, oil and sharp edges.

Product description

The DEWALT DWMT70785 Air Chisel Hammer features a light weight aluminum body with a medium barrel design, and a shock absorbing handle for user comfort and ease. This air chisel has a touch control trigger for easy user control. It has a 1/4" air inlet, and and operates at a speed of up to 2,600 BPM (beats per minute). The DWMT70785 air chisel hammer accepts standard .401" chisel shanks. It includes 3 chisels for the user to pick from. It is backed by Dewalt's 3 year limited manufacturers warranty.

• Aluminum Body Design
• Touch Control Trigger
• Shock Absorbing Handle
• Accepts standard .401" chisel shanks
• 1/4" Air inlet
• 4.5 CFM Average Air Consumption

User questions & answers

Question:	How difficult was it to get the spring on? I think this one might have bad threading because it doesn't seem to want to go on
Answer:	The spring has a rounded hook with a tab on one end to hold the shaft of the chisel loosely in place. That end is on top. The other end just has a tab. If you use the two tabs on the spring to twist it on and off the spring will thread more easily. The tabs relieve the tension of the spring.
Question:	Would this work for grooving out cracks in concrete for patching
Answer:	Yes indeed. I have done some work to repair concrete cracks and the tool works great. It's best if you have an ample air supply.
Question:	Would this work with concrete
Answer:	Yes for small chucks
Question:	Would this work for demo of a brick chimney
Answer:	Definately. I use it for ceramic tile and stone demo. You will need plenty of air tho. I use a large compressor for this

Product description

The Ingersoll Rand 119MAX and 123MAX Air Hammers are built on the hardworking and respected foundation laid by the 118MAX and 122MAX. The results are light, quiet and powerful air hammers that deliver incredible levels of performance and power at a cost that won’t punish your wallet. Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. The 119MAX and 123MAX are optimized for the vehicle repair industry, heavy trucks, and MRO. Both models are available as tool with quick change retainer and as kits with tool, quick change retainer, and 5-piece chisel set. The 119MAX and 123MAX are the finely tuned and crafted air hammers you need to tackle your everyday jobs in the toughest environments.

• Size and Weight: 18% shorter and 5% lighter than 118MAX and 122MAX
• Vibration: Anti-vibration mechanism reduces tool vibration by over 30% when compared to standard air hammers
• Comfort Grip: Shock reduction and anti-slip grip
• Quick-Change Retainer: Provides fast chisel changeovers (included with tool)
• Swivel Air Inlet: Prevents hose twisting during use
• Kit Includes 5-Piece Chisel Set

User questions & answers

Question:	What’s the difference between the 119 max and the 123 max
Answer:	The difference is the 119 is a long barrel gun that hits harder and slower and the 123 is a shorty barrel which hits faster bit doesn’t hit as strong as the 119. I have both and prefer the 119. The 123 is too weak.
Question:	Can I put 150 psi air on it
Answer:	I would surely think so, seeing as most industrial shops run that high for pressure but would have to confirm with the manufacturer AND you would think it is on the packaging. That’s all I got.
Question:	Is the air consumption controllable, like a variable speed for lite or heavy work load
Answer:	No air control.
Question:	How many Blows per Minute
Answer:	Thank you for your inquiry. The 123MAX has 3530 blows per minute.

Product features

Ingersoll Rand 119MAX & 123MAX Air Hammers

The 119MAX and 123MAX Air Hammers are built on the hardworking and respected foundation laid by the 118MAX and 122MAX. The results are light, quiet and powerful air hammers that deliver incredible levels of performance and power at a cost that won’t punish your wallet. Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work. The hammers are optimized for the vehicle repair industry, heavy trucks, and MRO. These tools are built for the toughest environments.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer premium quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes chisel shank size .401.

The Ingersoll Rand 114GQC standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston. A three-piece chisel set is included.

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

This product measures 8.5 inches long and weighs 4.1 pounds. Included is a three-piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

About Ingersoll Rand

Ingersoll Rand is a global, diversified firm providing products, services, and solutions to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and commercial properties, and increase industrial productivity and efficiency. Driven by a 100-year-old tradition of technological innovation, Ingersoll Rand enables its customers to create progress and a positive impact in their world.

What's in the Box

Ingersoll Rand 114GQC standard-duty air hammer and a chisel set containing a tapered punch, panel cutter, and flat chisel.

From the Manufacturer

The economic air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price.

• Includes 3-piece chisel set
• Quick change chisel retainer
• Longer life alloyed steel barrel and heat-treated piston
• Diffused handle exhaust
• Ergonomic grip

User questions & answers

Question:	Can it be used on tie rods and ball joints
Answer:	Yes, has plenty of power to handle suspension parts.
Question:	Where is it made
Answer:	This Ingersoll Rand Air Hammer and Chisel Set is made in Taiwan.
Question:	How do I assemble it out of the box? This is my first air hammer and it doesn't tell me anything in the printed materials
Answer:	The "tip" if you will is basically a quick (dis)connect attachment for the tips that came with it. Put that on and use the allen screws built into it to tighten it really good. Then you just grab it and slide it down towards the hammer itself, which allows you to insert the tips, then let go and they should be locked in. They won't be locked in tight, because otherwise the hammer isn't able to do it's job and move them, but you should be unable to pull them back out without sliding down the collar again.
Question:	I've got a 2cfm @ 90 psi porter cable compressor. will that be sufficient to power this tool enough to loosen the fan clutch (3 seconds?)on my truck
Answer:	Nope it will not. The specs say "average consumption 4cfm." This means at zero load basically holding it in your hand and pulling the trigger it'll use 4cfm at 90psi. Under load like chiseling out a stuck wheel bearing I've measured mine using 15cfm at 90psi. My 80 gallon continuous duty Ingersoll Rand compressor runs it fine but it's 7.5hp at 240v and is rated for 20cfm at 175psi which I regulate down to 90. My Ingersoll Rand gas powered dual tank "contractor" compressor barely runs it at 11cfm at 90psi. The truck bed mounted gas compressor is the only other one that runs it very well. Manufacturers will never tell you what tools use under load and will deceive the uninformed with specs like "average cfm consumption". I'm not knocking Ingersoll though as they have top notch products it's an industry practice / standard.

Product features

Ingersoll Rand Edge Series 114GQC Quick Change Air Hammer

This standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.

Product Advantages

- Includes 3 piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

- Efficient design with quick-change chisel retainer that allows you to change chisels quickly and easily

- Longer life alloyed steel barrel and heat-treated piston

- Diffused handle exhaust

- Award-Winning ergonomic grip that offers greater comfort while your're working

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 year. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world's growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The CP7150K Heavy Duty Air Hammer has a longer piston strokes for more force per blow. The kit includes a 4 piece chisel set packed in a heavy duty carry case. Integral muffler minimizes exhaust sound. All Impact parts are heat-treated for durability and an ergonomic handle for added operator comfort. Ideal for muffler and pipe removal, body shop work, shock work, scraping rust, and light front-end work. 2100 blows per minute. Spring retainer for simple accessory changes. 0.401-Inch chisel shank opening. Specifications: chisel shank opening - 0.401-Inch, bore diameter - 3/4-Inch, cfm - 4.5, piston stroke length - 3 1/2-Inch, hose size - 3/8-Inch, blows per minute: 2100. (replaces the CP715K).

• Standard 0.401 round shank
• Longer piston stroke for more power
• Integral muffler minimizes exhaust sound
• Easy change retainer for quick accessory changing
• Ideal tool for heavy-duty applications

User questions & answers

Question:	The safety instructions with the cp7150 say "do not use quick disconnect couplings at tool." but isn't it standard practice to do just that
Answer:	They recommend using a "whip" hose to connect the tool to the air system. A whip hose is a short flexible hose that is used as the quick connect. One end of the whip hose connect to the tool and the quick connect is at the other end. Search Amazon for a whip hose. The reason to not put a quick connect at the tool is that it places extreme mechanical stress on the tool.
Question:	Can you fit a quick release chisel holder/adapter onto this tool? i have an adapter that says it fits on 1-3/16"-8 tpi threads
Answer:	Yes you can, and this air hammer has more jam that mac tools one!
Question:	Does it come with air hammer bits
Answer:	Just the Air Hammer with mine!!
Question:	My new cp7150 air hammer, fed by 90 lbs pressure, is not hammering. is the 3/8" id hose with 1/4" npt fittings too small
Answer:	3/8 hose and 1/4 npt fittings should be ample air supply at 90 lbs. have you tried lubricating the tool?

Product features

Chicago Pneumatic CP7150K Air Hammer Kit

The CP7150K Heavy Duty Air Hammer has a longer piston strokes for more force per blow. The kit includes a 4 piece chisel set packed in a heavy duty carry case. Integral muffler minimizes exhaust sound.

All Impact parts are heat-treated for durability and an ergonomic handle for added operator comfort.

Product description

The Arm & Hammer Air Care Pet Scents Plug-In & Refill in Lavender Fields brings you a natural way to eliminate pet odors from the home in a way everyone can enjoy. This easy to use electric oil diffuser may seem like any other air purifier, but it is specifically designed for pet odor elimination. It includes the electric oil diffuser plug in, which easily and effectively eliminates pet odors from the home. This order also includes a plug in refill so you don't have to worry about running out and being left without the great scents. Stay fresh for up to 30 days with Arm & Hammer Air Care Pet Scents Plug-in & Refills. The baking soda infused formula of this oil diffuser acts as a natural deodorizer, while the lavender scent leaves behind a beautiful smell that the entire household will love. This odor neutralizer is easy to plug into the wall and comes with a plug in refill, giving you up to 30 days of freshness. Get a great smelling home and set the mood for total calm with Arm & Hammer Pet Scents Plug Ins. YOUR SATISFACTION IS OUR PRIORITY: If you have any questions or feedback, please reach out to us at [email protected]

• ODOR NEUTRALIZING PLUG IN AIR FRESHENER – This easy to use pet odor eliminator oil diffuser is great for neutralizing pet odors in the home to keep your home smelling great
• UP TO 30 DAYS OF FRESHNESS – This oil diffuser plug in and refill provides enough great smelling pet odor control for up to 30 days of freshness
• INFUSED WITH BAKING SODA – The baking soda enhanced formula in this pet odor eliminator acts as a natural deodorizing agent to keep pet odors at bay in the home
• LAVENDER FRAGRANCE EVERYONE CAN ENJOY – The calming lavender scent that is emitted from this plug in air freshener is something both you and your pet will enjoy
• 20 mL OIL DIFFUSER – This 20 mL oil diffuser pet odor neutralizer comes in the perfect size and amount to keep your home free from pet odors and smells

Product description

Abuff 6 Pcs Air Hammer Bits Set, 0.401 Shank Smoothing Pneumatic Air Hammer Pneumatic Chisel Bits Tools Kit, Extended Length Hammer Tool With Spring



-The material is alloy steel, which is hard and durable.

-Use for tire repair , wind pipe pressure seam edge and so on.

-Multi-functional air hammer accessories excellent for any hammering operations.



Specification

-Material: Alloy Steel

-Color: Black

-Size: (L*D)

Extended Length Air Hammer bit: 173 * 25mm (6.81 * 0.98 inch)

Oval-shaped Head Air Hammer bit: 80 * 35mm (3.14 * 1.37 inch)

2 Pcs Flat Head Air Hammer bits: 100 * 30mm (3.93* 1.18 inch); 80 * 35mm (3.14 * 1.37 inch)

2 Pcs Spring: 35* 26mm (1.42* 1.02 inch)



Package Included:

4 x Air Hammer bits

2 x Spring

• 【AIR HAMMER BITS SET】-- 4 Hammer bits and 2 springs. 0.401" shank diameter (approx.10mm).
• 【HEAVY DUTY HAMMER BITS】-- Air hammer smoothing bits suit for air rivet hammer, for 150mm, 190mm, 250mm gun air hammer and gas shovel.
• 【USES】-- Hammer bits tools kit use for tire repair, windpipe seam edge, crushing hard rocks, etc.
• 【OVAL-SHAPED AND FLAT HEAD】-- Oval-shaped and flat head surface for the formation of metal plates, rivets, knock out and so on. Different shapes can adapt to different needs.
• 【HIGH QUALITY】-- Heavy duty air hammer accessories are made of high quality alloy steel for Necessary Hardness and Durability

Product description

Ingersoll Rand’s 121K6 super-duty air hammer with six-piece chisel kit makes fast work of body panel crimping and cutting, bushing driving, shearing, and general front-end work.

121K6 Air Hammer With 6-Piece Chisel Kit At a Glance: Professional touch trigger for total control Long-life tool with a tough one-piece alloy barrel Easy to maintain, with an easy-out throttle valve assembly Complete with six assorted steel chisels Kit dimensions: 3.9 inches by 12.7 inches by 9.7 inches; weighs 4.2 pounds

Ingersoll Rand's 121K6 kit includes the 121 super-duty air hammer, six durable steel chisels, and a sturdy blow-molded case. View larger

Features

The 121K6 kit combines Ingersoll Rand’s 121 super-duty pneumatic hammer with six assorted high-quality steel chisels that have been tested to meet the harshest of job environments and tasks. The hammer comes with a coil-spring retainer for fast and easy chisel changes, and the kit’s included chisels are: one 3/4-inch flat-blade chisel, one punch chisel, one claw ripper-edging tool, one single-blade cutter, one kwik cutter, and one vee chisel-spot welder breaker. The 121 hammer reaches 3,000 blows per minute at 90 PSI and has a 2.28-inch stroke length—and its light weight (3.5 pounds) aids in user comfort, making it easier to work through longer jobs more quickly. Whether chipping, punching, or cutting, the tools provided in this kit—which also includes a sturdy black blow-molded storage and carrying case—increase productivity thanks to powerful and sturdy construction.

About Ingersoll Rand

With a history dating back to 1871, Ingersoll Rand and its family of brands represents a proven history in construction, mining, industrial, and commercial markets. Through acquisitions, innovations, and customer focus, today's Ingersoll Rand offers market-leading solutions and services that enable customers to create progress through a variety of industries and markets that touch everyday life.

What's in the Box

One Ingersoll Rand 121K6 super-duty air hammer with six chisels and one storage/carrying case.

Ingersoll Rand's 121K6 kit features the compact but powerful 121 air hammer. (Click to enlarge)

From the Manufacturer

Ingersoll Rand air hammers are designed so you can let the tool do the work, whether it is cutting, punching or chipping. Each air hammer comes with a coil spring retainer for fast and easy chisel changes. Make fast work of body panel crimping and cutting, bushing driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3000 blows per minute.

• Professional touch trigger for total control
• Long-life tool with a tough one piece alloy barrel
• Easy to maintain, with an "easy out" throttle valve assembly
• Kit includes: a blow molded plastic case with a removable lid and 6 chisels
• Air hammer comes in a blowmolded case with 6 chisels

User questions & answers

Question:	Where are these made (i.e. Country of origin
Answer:	The model 121-K6 is manufactured in China.
Question:	Can this tool be used with a set of rivet tools to set rivets
Answer:	David, although this is a great air hammer w/chisel set, I do not think this is what your looking for. The only chisel in the set that may help you with your question is the pointed or center punch chisel that would allow you to center punch the rivet after installation. Hope this helps
Question:	Is this unit strong enough to remove axles splines from hub assemblies? This is dealing with automobiles & axles
Answer:	Nah, this one really sucks. I've needed it for 2 jobs and it was useless for both. Don't waste your money
Question:	Was this built in usa or china
Answer:	Made in China.

Product features

Ingersoll Rand 121-K6 Super Duty Air Hammer with 6-Piece Chisel Kit

Make fast work of body panel crimping and cutting, bushing driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3000 blows per minute. 121-K6 Air Hammer Kit Combine the 121-Q Air Hammer into the convenience of a kit. Kit includes 121 Air Hammer, blow-molded black carrying case, and six assorted chisels. Assorted chisels include 3/4" flat blade chisel, punch chisel, claw ripper-edging tool, single blade cutter, kwik cutter, vee chisel-spot welder breaker.

What's in the Box:

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 years. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world’s growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.

Product description

The Chicago Pneumatic Super-Duty Hammer is a powerful tool designed for automotive, truck, and off-road equipment use; it is ideal for applications such as front-end work, king pin removal, removal and installation of bulldozer walking beams, and removal of truck springs and heavy-duty spring bushings. Offering 1,800 blows per minute, this air hammer measures 9-3/4 inches, weighs 4-3/4 pounds, and has a 3.13 CFM average air consumption. This tool also features a positive-action trigger for more precise control and a 0.498-inch diameter chisel shank opening to handle the extra power.

• Most powerful CP air hammer for automotive, truck and off road equipment
• Positive action trigger for precise control because of spool valve
• 1,800 blows per minute
• .498-Inch diameter chisel shank to handle the extra power
• Longer stroke heavy duty piston

User questions & answers

Question:	What’s the max psi
Answer:	I have my shop air set at 140 psi had this gun for three years and still does the job. I dont use it daily only every few months.Other air hammers in the past seem to fade. so far good luck.
Question:	What is the minimum cfm from air compressor required for this air hammer
Answer:	Chicago pneumatic state an actual air consumption of 12.5 cfm.
Question:	How does this compare to the astro pneumatic one they call big nasty? you can search for big nasty and videos will pop up. is this one better
Answer:	The big nasty is a cheap copy of the 717 the 717 has better trigger control.
Question:	Will this gun handle 120 P.S.I
Answer:	Yes it will handle that without problem. I use mine with 145 psi.

Product features

Chicago Pneumatic CP717 Super Duty Air Hammer

The CP717 is a Super Duty Air Hammer and is the most powerful air hammer available for automotive, truck and off road equipment. Extra large .498 shank for heavy duty applications.

Heavy Duty customers will love this powerful tool. Positive action trigger for precise control. Ideal for front end work, king pin bushing removal and installation of bull dozer walking beams, removal of truck springs and heavy duty spring bushings.

Specifications: chisel shank opening - .498-Inch, bore diameter - 3/4-Inch, piston stroke length - 2 11/16-Inch, cfm - 7, hose size - 3/8-Inch, blows per minute 1800.

Maintenance and Repair

This product is designed for removing material using a chisel or suitable needles. No other use permitted. For professional use only. Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Always ensure that the machine is disconnected from energy source to avoid accidental operation. Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts. High wear parts are underlined in the parts list.

About Chicago Pneumatic

Chicago Pneumatic is a brand name in the pneumatic tool industry which has a history traced back to 1889. Since decades, Chicago Pneumatic has a heart for the general industry and matches your highest demands with the right solutions. First of all, you will be introduced to the Chicago Pneumatic way of working.

While our history and general product offer provides you with a general background of our brand, the principles and technologies section will familiarize you with the practical side of our products. This gives you the right know-how and confidence to take your business to the next level. It is simple, really. You have work to do, customers to serve. Chicago Pneumatic is there to help you get the job done, without compromise.

• [SDS MAX 3/4 INCH INTERFACE]Fits SDS-Max compatible tools，removal of plaster and light demolition work in masonry, for breaking up and loosening earth, screed and bitumen
• [3 Different mode]: Three-mode operation includes "Rotation Only," "Hammering with Rotation," and "Hammering Only" for multiple applications.Three different functions of drill,hammer and hammer drill function adapt to variety of work scenarios which are easy to switch
• [Package included]: Sds max (point/flat) chisels *2 , Auxiliary handle * 1 , Dust cap * 1 , Oil cap wrench * 1 , Grease pot * 1
• [360 degree adjust handle]: Vibration control enhance the control feeling.Double layer dustproof air inlet design extends service life,Rubber and 360 degree adjust handle provides a comfortable user feeling.
• [Various Speed Control]: Features 5 levels speed settings. Max un-load rotary speed ups to 650r/min, impact frequency ups 4200bpm. User-friendly convenient speed dial control system, easy to operate.
• NOTE:Insert the chisel until it locks,if u have any problem,just contact us in time.

User questions & answers

Question:	Does it work on US plug? 110V
Answer:	yes，it is work with 110v US plug
Question:	why doesnt the chisel lock in place
Answer:	It needs to move and slide to hammer. If you are asking why doesn't it catch at all, then sds-max chuck is probably broken. I bought this twice, one caught literal fire, second one chuck broke, but i kept using it with bits falling out until it stopped hammering completely. Both failed well before return window closed.
Question:	Will it work with a normal 120 volt outlet
Answer:	Yes, it's applicable.

Product features

THREE FUNCTIONS

• Three-mode operation includes "Rotation Only," "Hammering with Rotation," and "Hammering Only" for multiple applications.
• The double function switch design can extend 100% service life compared with single function switch design

DUSTPROOF AIR INLET

Double layer dustproof air inlet design extends service life

SDS MAX ACCESSORIES

• 1 X auxiliary handle
• 1 X point chisel
• 1 X drill bits
• 1 X depth gauge
• 1 X spanner

Multitude of uses

Can quickly cleans remove debris and drill a wall, concrete ,cermaic tie, stone, plastic.

Product description

The Chicago Pneumatic Heavy-Duty Air Hammer is a highly versatile tool ideal for complete body shop work such as front-end, exhaust, frame, body work, and more. The air hammer offers up to 2,000 blows per minute, and its positive-action trigger provides precise control over the speed range. Weighing just 3-1/3 pounds, this heavy-duty tool offers a lightweight design and has a shank opening of 0.401 inches.

• Positive action trigger for precise control over speed range because of spool valve
• Versatile-handles widest range of applications
• Hammer weighs just 3.33 lbs.
• 2000 blows per minute
• CP Classic Tool- Now comes with 2 year warranty!

User questions & answers

Question:	can this be used to break up a cement sidewalk
Answer:	It is not made for cement. I don't think is would be heavy enough to do anything but chip up the cement.
Question:	is there a quick-change retainer available for the CP
Answer:	Chicago Pneumatic 8940158924 Air Chisel Quick Change Retainer for .401 Shank
Question:	Please tell me this is made domestically
Answer:	you know I'm not sure .It looks just like the one I've used for 48 years they are the best I bought my first one in 1967 you can't go wrong with this one
Question:	How does this compare with the CP 7150 that is stated to be the strongest in its class
Answer:	I don't doubt the 7150 is more powerful. This tool is very controllable, well balanced nice trigger. I have owned several air chisels over many years doing auto body repair and really like this tool.

Product features

Chicago Pneumatic CP714 Heavy-Duty Air Hammer

The CP714 is a super duty air hammer for professionals who want the best. Choose the CP714 for a wide range of applications including front end, exhaust, riveting, king pin bushing removal and bolt shearing.

This is the most controllable CP Hammer available has a extra sensitive tease throttle because of its spool valve which controls starts and stops.

• Package included: 4 PCS Heavy duty Hammer bits Tool and 1 PCS Spring.
• Heavy duty Hammer bits Tool for 150mm, 190mm, 250mm gun air hammer and gas shovel, handle diameter approx.10mm.
• Size:Length:180mm,100mm,83mm,83mm;Head Type: 3 PCS Flat,1 PCS Spherical ;Material: Alloy Steel;Colour:Black;Type: Hammer Bits;
• Hammer bits tools kit use for tire repair , wind pipe pressure seam edge and so on.
• The bit installed in the Pneumatic sewing machine, need to connect the air compressor to use.

User questions & answers

Question:	None of these people know what size solid rivets these bits are for. Do so product research ffs
Answer:	dont know the diameter, but the shanks fit the bauer hammer drill purchased from harbor freight tools.
Question:	Will these rivet setters work just using a regular hammer? Would these also work for setting tubular rivets too
Answer:	I used a Bauer 10 amp Rotary Hammer drill and the bits did the job. I guess you should look to see what size bit your drill will accept. My hammer drill knocked out tile removal in a weekend. Your manual should give you this info. Hope this helps! Best, Michael
Question:	Will these fit a .401 ingersoll rand hammer
Answer:	If you have a hammer drill use a hex screw extension to lock down on the sds plus bit connection. You would get better performance with Milwaukee sds plus extension with sds plus drill.
Question:	Will these knock out the pins and bushings for spring brakes on a truck/tractor/semi
Answer:	Not sure probably China. They did a great job on my Kitchen demo, I would recommend.