13 best itx cases

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H210i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Remastered design: The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build
• Simple cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• Streamlined cooling: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removeable bracket designed for radiators up to 240mm
• Enhanced Motherboard support: Mini-ITX

User questions & answers

Question:	can you put a hard drive in it
Answer:	You can install a 3.5 hard drive in the back of the case on the bottom It also has 2 spots in the back of the case for two 2.5 hard drive great case I love mine
Question:	I see questions of whether rtx cards will fit, but how bad is the card starved of air? it looks like the card would hug the psu cover very tightly
Answer:	If you’re spending rtx money step up to something with more vents on top so you can exhaust your hot air out better. The c mesh has pretty good airflow
Question:	Will a 3.2 gen 1 header on motherboard work with the gen 2 type c port on the case
Answer:	It is all a bit confusing. They renamed the former USB 3.0 to now call it USB 3.2 Gen 1. That is the big connector (19 pin/20 pin plug with the notch in one side) that connects to the USB 3 port on most motherboards. My new NZXT case with a type C USB port on the front has a cable with a much smaller connector on the end. It doesn't fit into the usual USB 3.0 socket on the motherboard. My Gigabyte Z390 Aorus Pro motherboard does have a USB type C header (with USB 3.1 Gen 1 Support) that matches the cable plug. So, you need that USB type C header on your motherboard. It is small. If you have one, then plug it in. If you don't have one on your motherboard, then you would need an adapter to be able to plug the cable into the usual USB 3.0 (19/20 pin) header.
Question:	Will the gigabyte b450m micro atx motherboard fit with this case
Answer:	No, this case fits Mini ITX. The H510i (or 710) will fit a Micro ATX board though.

Product features

H210

The smallest H Series case, the H210 and H210i come in at a slim 27 liters but give up nothing. The full tempered glass showcases your mini-ITX build with glorious clarity and the front mounting bracket allows installation of radiators up to 240mm. Supporting both SFX and ATX power supplies and front USB 3.1 Gen 2 type-C, you don’t need to make any compromises with this build.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

Experience the ease of installation and maximum cooling only Thermaltake can deliver with the Core V1 Extreme Mini ITX Cube Chassis. With multiple configurations for both Air and Liquid cooling setups, the Core V1 offers multiple options for today’s cooling demands. Save time with a tool-free drive bay design, optimized air flow and modular chassis options to configure your build, your way and get back to gaming. "Overall ThinkComputers gives the Thermaltake Core V1 Mini-ITX Case a 10 out of 10 score and our Editor's Choice Award" - ThinkComputers "If you are looking for a Mini-ITX case this should be your first choice." - ThinkComputers "The Thermaltake Core V1 is one of the best mini-ITX cases we've ever seen." - HardOCP *Earned HardOCP's Gold Award *Earned Legit Reviews Editor's Choice Award • Extreme Air/Liquid Cooling Configurations Options and Dual Modular Drive Rack Design • 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 2x 3.5", 2x 2.5" • Includes 1x 200mm Front Fan Pre-installed, Optional Cooling Available • Interchangeable Side Panels allow users to build the system with personality • Chamber Concept Design with optimized Cable management space for Small Form Factor Builds • 3 Year Warranty Key Features: • Case Type: Mini ITX Cube Case • Case Dimension (H x W x D): 10.9" x 10.2" x 12.4" • M/B Type: Mini-ITX (6.7" x 6.7") • Side Panels: Window (Interchnagable) • Supports Standard PS2 Power Supply • Storage Bay: 2x 3.5" or 2.5" • Expansion Slots: 2 • Front I/O Panel: 2x USB 3.0, 1x Headphone, 1x Mic Ports Fans Included: • Front (intake) : 200 x 200 x 30 mm fan (800rpm, 13dBA) Clearance: • CPU Cooler Height: 140mm • VGA Length: 255mm (Inner chassis), 285mm (Outer chassis) Fan Configurations: (Optional) Front: 1x 120mm or 1x 140mm or 1x 200mm Rear: 2x 80mm Radiator Configurations: (Optional) Front: 1 x 120mm or 1 x 140mm Support Please visit our website or search "Thermaltake Support" for any assistance.

• Supports Mini ITX Motherboard
• 2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 2x 3.5 inches, 2x 2.5 inches 1 x 200 millimetre fan, 2 x 80 millimetre turbo fans (optional)
• Interchangeable Side Panels: Symmetrical panels to build the system with personality
• Adjustable I/O Panel Location. Extreme Air/Liquid Cooling Configurations Options and Dual Modular Drive Rack Design
• Chambers Concept. Advanced Ventilation
• Great Expansion in Compact Size : install up to 2 data storage devices. VGA with the length up to 285 millimeter , CPU cooler with height up to 140 millimeter , together with a high wattage PSU of length up to 200 millimeter
• 3 year warranty

User questions & answers

Question:	What are the actual case dimensions? in inches, amazon says (l x w x h) (15.4 x 15.4 x 19), thermaltake says (h x w x d) (13.2 x 12.6 x
Answer:	I'm not sure what those numbers are from Amazon, but Thermaltake's numbers are by far closer to reality. Actually, I think Thermaltake's numbers are pretty much spot on, but the height and length numbers they're quoting have the back thumbscrews and bottom legs included. The actual shell itself, yielding usable space, is roughly along the lines of: L x W x H = 16.25 in. x 12.6 in. x 12.6 in. Again, those are rough numbers, but when you add in the thumbscrew and leg lengths, you end up with approximately the measurements given by Thermaltake.Amazon's numbers are simply wrong.
Question:	Will the cooler master hyper 212 evo fit
Answer:	It depends. The mATX Core 21 will fit the 212 Evo. But, the mITX variant, is too short to fit one.
Question:	Does it use a standard size ATX PSU
Answer:	Yes It does, There is a length limitation of around 200 mm on the psu, but the vast majority are in 140 to 180 mm range should not be any problem. Most psus will fit fine.
Question:	Why is this #1 bestseller in handheld vacuum bags
Answer:	It effectively tears a hole in the space time continuum, where all of your vacuumed whatnot disappears to. It's saving the planet, one rube at a time!

Product features

Great Expansion in Compact Size

Designed with high-end system compatibility, users can easily install up to 4 data storage devices with the modular drive racks, a dual expansion slot VGA with the length up to 260mm, a tower CPU cooler with height up to 140mm, and a high wattage PSU with a length up to 180mm

Chambers Concept

Core V1 has divided into two main chambers: the upper chamber is made for cooling performance and efficiency, and the lower chamber is made for PSU and cable management.

Product description

The SG13 features an atx-compatible power supply mount and can fit ATX power supplies up to 150mm long which provides clearance for CPU coolers up to 61mm tall Optionally builders can choose an SFX power supply If used with the separately-available Silverstone PP08B atx-to-sfx adapter This will provide an additional 21mm of space inside the chassis thereby allowing the use of CPU coolers up to 82mm tall The SG13 also gives builders options when it comes to storage It can fit one 3 5" Drive and ONE 2 5" Drive or alternatively three 2 5" Drives Finally builders have the choice of running the SG13 without active cooling adding a 120mm/140mm fan to the front panel or adding a 120mm/140mm CPU Cooler to the front panel Note that 140mm products will reduce space Available for video cards so for example a 25Mm-thick 140mm-class fan will take up approximately 1" Of the 10 5" Video card space leaving 9 5" For a video card

• Support standard-length expansion cards (10 5 inches)
• Mini-dtx/Mini-ITX motherboard & ATX PSU compatible
• Support 120mm or 140mm single fan all-in-one liquid cooler
• Support 2 5" And 3 5" Hard drives
• Elevated standoff for motherboard back side components

User questions & answers

Question:	will a wraith spire cpu cooler fit
Answer:	Only if you use a sfx power supply. If you try and use a standard ATX power supply it will not fit.
Question:	Can I use a stock cooler with a standard size psu (evga
Answer:	I can vouch for the Intel stock cooler, but I'm uncertain about the AMD varieties. The Intel stock cooler clears a full size PSU easily.
Question:	The white/quiet edition case dimensions are stated to be larger than the other models in the specs. Is this true or a typo by the seller/ Amazon
Answer:	Hello,The size that Amazon references in their specifications is the size of the retail packaging (the box that the case comes in). The SG13's all have the same physical size and do not vary between the quiet and different colored versions.
Question:	Can I fit a normal size psu in this b
Answer:	Yes, I fit a cooler master v750 in mine.

Product features

Two front panel types:

Choose mesh for maximum airflow in gaming systems or solid for quieter operation in home office and home theater systems.

Two color choices:

Choose black for a more subdued look, or black-on-white for a uniquely-classy look.

Impressive compatibility:

Despite the SG13 measuring just 11.22" deep, it can accommodate video cards up to 10.5" long, including all reference-design Nvidia GeForce-based models.

Internal configuration options:

The SG13 features an ATX-compatible power supply mount and can fit ATX power supplies up to 150mm long, which provides clearance for CPU coolers up to 61mm tall. Optionally, builders can choose an SFX power supply if used with the separately-available SilverStone PP08B ATX-to-SFX adapter. This will provide an additional 21mm of space inside the chassis, thereby allowing the use of CPU coolers up to 82mm tall.

The SG13 also gives builders options when it comes to storage. It can fit one 3.5" drive and one 2.5" drive, or alternatively three 2.5" drives.

Finally, builders have the choice of running the SG13 without active cooling, adding a 120mm/140mm fan to the front panel, or adding a 120mm/140mm CPU cooler to the front panel. Note that 140mm products will reduce space available for video cards, so for example a 25mm-thick 140mm-class fan will take up approximately 1" of the 10.5" video card space, leaving 9.5" for a video card.

Product description

Personalize your rig with addressable RGB modes! The A1 Plus features a tinted transparent stand and the addressable RGB lights Pierce through to create an awesome lighting experience.The A1 Plus comes with two complementary Sirius loop ASL120 fans. The matte black Structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan So lighting is present no matter the fan placement. The A1 Plus's convenient wireless charging Station is now WPC Qi 1.2 certified. It now emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice. The square structure provides a hassle-free installation, and the capacity to house powerful hardware in its Mini-ITX form. The A1 Plus supports a CPU heatsink height up to 160mm and accommodates up to 320mm length graphics cards.

• Personalize your rig with addressable RGB modes! The A1 Plus features a tinted transparent stand and the addressable RGB lights Pierce through to create an awesome lighting experience.
• The A1 Plus comes with two complementary Sirius loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB Outline is presented on both sides of the fan So lighting is present no matter the fan placement.
• The PSU is prebuilt within the A1 Plus with the cables already managed and is accommodated with two GPU connectors (PCI-E 6 + 2-pin) for high-end graphics cards. Power Supply Compatibility - InWin 650W PSU Included. AC Input/Efficient - AC input: 100-240V / 80 PLUS Gold
• The A1 Plus's convenient wireless charging Station is now WPC Qi 1.2 Certified. It NOW emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice.
• The square structure provides a hassle-free installation, and the capacity to house powerful hardware in its Mini-ITX form. The A1 Plus supports a CPU heatsink height up to 160mm and accommodates up to 320mm length Graphics cards.

User questions & answers

Question:	Can the cooler master v8 gts cpu cooler fit in this case
Answer:	Probably not. Even if it did fit airflow will be an issue since half the cooler will be blocked by the PSU. I have a Dark Rock 4 in mine and that's the biggest cooler I'd recommend for it
Question:	Can a cryorig h7 quad lumi fit in this case
Answer:	yes! you can check pcpartpicker.com if you want to verify !!
Question:	Can you fit a hard drive or SSD in here
Answer:	Up to 2 ssd in the back of the motherboard.
Question:	is the power supply fully integrated? Would i be able to swap it out easily in the future if needed
Answer:	You can swap it out but not easily.

Product features

A1 Plus

Personalize your rig with addressable RGB modes! The A1 Plus features a tinted transparent stand and the addressable RGB lights Pierce through to create an awesome lighting experience.The A1 Plus comes with two complementary Sirius loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan so lighting is present no matter the fan placement.

Top Panel Wireless Charger

The A1 PLUS's convenient wireless charging station is now WPC Qi 1.2 certified. It now emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice.

InWin Sirius Loop 120mm ARGB Case Fans

The A1 PLUS comes with two complementary Sirius Loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan so lighting is present no matter the fan placement.

Loop in More Color!

Personalize your rig with addressable RGB modes! The A1 PLUS features a tinted transparent stand and the addressable RGB lights pierce through to create an awesome lighting experience.

InWin 650W PSU

The 650W PSU is 80 Plus Gold. The PSU is prebuilt within the A1 Plus with the cables already managed and is accommodated with two GPU connectors (PCI-E 6 + 2-pin) for high-end graphics cards.

Product description

The Master Box Q300L is your straightforward option in the lineup of the brand new Master Box Series from Cooler Master. A Series that might be small in size but excels in functionality and modularity without compromising on the thermal performance. Although the size wouldn't tell, the Master Box Q300L supports a standard ATX PSU which we don't see often in the market with this size. Based on the different system setup, the I/O panel can be adjusted to six different locations, three options at each side of the case. You can decide which setup fits your system best. Due to the cube design of the frame and special pattern design on the magnetic dust filter will make the chassis stand out from the rest. The combination of a practical design and the unique customizable outlook makes the Master Box Q300L The perfect choice for office and home.

• I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal
• Edge to edge acrylic transparent side panel offers a full view inside
• Body depth height: Can support normal size ATX power supply
• Front magnetic design dust filter with open perforated front, top and bottom for high air performance
• Extra space behind the motherboard tray for hidden cable management

User questions & answers

Question:	Will the asus geforce gtx 1060 3gb dual-fan oc fit in this case
Answer:	According to the Asus website, the dimensions for that card are 24.2 x 13 x4.3 Centimeter I'm currently using a Zotac 1060 6GB AMP! Edition, whose dimensions are 210mm x 121.8mm x 37mm The ASUS card is about an Inch longer, but there is WAY more than enough room in the case to fit the ASUS card.
Question:	can it fit a normal ATX power supply
Answer:	Absolutely will fit any ATX power supply. I'm using thermaltake smart series 500w rgb.
Question:	I've seen photos of the handle (from a Q300P) being attached to the center of the top panel of this case. Is this possible
Answer:	You can remove the plastic bit that has the cooler master logo on it and install handles on the case like the Q300P
Question:	Is this case wide enough to support a cooler master hyper 212 evo
Answer:	I know what the official CM specs are, but I think it will fit. This guy installed a taller cooler with its cover and it fit. https://www.vortez.net/articles_pages/cooler_master_masterbox_q300l_review,8.html

Product features

MasterBox Q300L

The MasterBox Q300L is your straightforward option in the MasterBox Q-series from Cooler Master, a series that might be small in size but excels in functionality, modularity, and thermal performance. The combination of a practical design and the unique customizable aesthetic makes the Q300L the perfect choice for office and home use.

System Flexibility

6-orientation I/O panel—both sides: front, top, and bottom.

Edge-to-Edge Acrylic Side Panel

Show off your build through the full-size transparent side panel.

Clean Routing Space

28 mm of open space for hidden cable management.

Small Form Factor, ATX PSU Support

Despite the Micro-ATX form factor and the body depth/height of only 370 x 370 mm, the Q300L can accommodate a normal ATX PSU.

Product description

TU150 functionalities are inspired by the market leaders TU100 and TU200 Notable improvements include a redesign of the iconic handle which is now Retractable and can Vanish seamlessly into the chassis top panel to leave room to a stylish system for all to admire In addition the top panel gained depth from the handle leaves enough room for proper cable management An essential feature in mini- its cases i/O ports 2x USB3 0 1x Type C audio on the top m/B Type Mini-ITX/ mini-dtx system fan 1x 12cm in the front (optional) 1x 12cm in the rear(optional) psu SFX or SFX-L

• Aluminum Mini-ITX case with tempered glass left side panel
• 2 x USB 3.0, 1 x type C, HD Audio front ports
• Hdd: 2 x 2.5" Or 1 x 2.5" And 1 x 3.5"
• Power Supply :ONLY Supports SFX/SFX-L Size Power Supply
• Graphics Card LIMIT SIZE：L<320mm W<167mm H<60mm

User questions & answers

Question:	I have a 240mm cpu aio cooler and 120mm gpu (2080 ti) cooler. is there enough mounting space for that in this case
Answer:	It's not recommended but you could.
Question:	Will the front panel accomodate a 140mmx38mm or 120mmx38mm 3-pin fan
Answer:	It will take a 120mm without issue. 140mm will need a 120 to 140 fan adapter.
Question:	Can it fit a hard drive and a ssd
Answer:	Yes, 3.5" HDD can fit on the "roof" of the case if your CPU cooler doesn't interfere, and a 2.5" SSD mounts to the right of the motherboard below the PSU
Question:	What model number would be same exact case but with aluminum panel instead of glass
Answer:	TU-150X

Product features

TU150, w/Tempered Glass Side Panel & Aluminum Exterior, Mini-Tower ITX Gaming Case with Retractable Magnetic Handle

• Stylish and modern design: left-side panel in tempered glass combined with premium aluminum all around the exterior to protect all of your components.

• Retractable magnetic handle for added portability.

• Tool-less design all around the panels makes your building experience even easier.

• Compatible with ITX and DTX-sized motherboards

• Spacious enough for a 320mm long graphics card.

• Optimized airflow: supports a huge CPU cooler up to 165mm tall and four 120mm fans, two of which locate beneath the GPU to keep the graphics card running at optimum performance temperature. Apart from two long sections of ventilation holes at the front panel to cool the interior, one section of the ventilation holes located at the right-side panel provides a designated airflow for the power supply.

• Smart storage layout: users can install one 2.5” SSD or 3.5” HDD underneath the top, and another 2.5” SSD on the motherboard tray to have it boldly displayed through the glass panel.

• Cable management at ease: cables can be organized underneath the top panel or behind the motherboard tray to create a clean interior layout.

• Equipped with 1 x USB 3.1 for quick access to the external devices.

Product description

"The Master Case H100 is a mini-ITX case that can be configured as a portable gaming rig, a tiny living room PC, and a desktop space-saver. From its industrial construction to its entirely mesh front panel, the H100 fits neatly in the series as a travel-sized alternative. Mesh makes up the entire front panel and part of the top panel, offering just enough room for a built-in handle to add to its portability. Whether you’re saving desk space or looking for a portable alternative to the H Series, the H100 houses powerful mini-ITX systems in a tiny amount of space.

• Compact Mini ITX A highly compact layout efficiently uses space to keep dimensions minimized
• Fine Mesh Ventilation The entire front panel and part of the top panel features fine mesh, achieving efficient airflow while also filtering out dust
• 200mm RGB Fan Even with compact dimensions, the H Series’ iconic 200mm RGB fan is included for optimal cooling
• ATX Power Supply Full sized ATX power supplies are supported to improve hardware compatibility and ensure efficient power to the system
• Built In Handle A handle is built into the top panel for added portability and on the go gaming

User questions & answers

Question:	Can i use a 240mm radiator on h
Answer:	The largest AIO you can install in this case is a 200mm radiator. CM-PNguyen
Question:	Will it fit a Asus 1080 ti fe
Answer:	For sure.
Question:	Can i install another 200mm fan on top and another 200mm to rear
Answer:	No
Question:	How many 3.5in drives can I fit in here
Answer:	It has 2 holders but if you buy additional it will hold 3 I'm not sure why it's shipped with only 2 and not 3 but I own a other master case and took one from it and it works

Product features

MasterCase H100

The MasterCase H100 remains fiercely loyal to the H Series, unwilling to part from the 200mm RGB fan despite its mini-ITX form factor. From its industrial design elements to its generous use of mesh, the H100 fits neatly in the series as a travel-sized variant.

Compact Mini-ITX

A highly compact layout efficiently uses space to keep dimensions minimized.

ATX Power Supply

Full-sized ATX power supplies are supported to improve hardware compatibility and ensure efficient power to the system.

RGB Lighting Control

One RGB controller is included in the accessory pack. Lighting can also be controlled through the reset button if the motherboard does not support RGB control.

Built-In Handle

A handle is built into the top panel for added portability and on-the-go gaming.

Fine Mesh Ventilation

The entire front panel and part of the top panel feature fine mesh, which achieves efficient airflow while also filtering out dust.

200mm RGB Fan

Even with compact dimensions, the H-Series's iconic 200mm RGB fan is included.

Cooling Support

Front: 120mm, 140mm, 200mm

*Mini-DTX may impact configuration options

Component Clearances

CPU Cooler: 83mm

Power Supply: 210mm (without radiator), 160mm (with radiator)

Graphics Card: 210mm (without radiator), 180mm (with radiator)

Storage Support

3.5" / 2.5" Combo x 1

2.5" SSD x 4 (3 + 1 Combo)

Product description

Extremely Small Footprint - Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs light gaming PCs or even a LAN rig Vents Incorporated in the Exquisite Streamline Design - The B1s exterior represents our insistence on performance and aesthetics Integrating ventilation in the design offers no compromise to form or function AMD & Intel Ready 2 - The depth of the chassis allows approximately 60mm for heatsink-clearance Granting enough room for most AMD and Intel coolers Fan and Dust Filter Included - Strategically placed fan and dust filter provides good thermal solutions and a dust-free interior Style that’s Versatile - Use the B1 to match your lifestyle! Setup Your PC vertically or horizontally! Stand it up and use it as a headphone stand! Preinstalled InWin 200W PSU - The B1 comes with a custom InWin 200W 80 PLUS Gold PSU It’s designed specifically for the B1’s small footprint User Friendly Design - The easy pop-off top that makes the building experience easier despite the smaller frame

• Extremely Small Footprint - Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs light gaming PCs or even a LAN rig
• Vents Incorporated in the Exquisite Streamline Design - The B1s exterior represents our insistence on performance and aesthetics Integrating ventilation in the design offers no compromise to form or function
• AMD & Intel Ready 2 - The depth of the chassis allows approximately 60mm for heatsink-clearance Granting enough room for most AMD and Intel coolers
• Fan and Dust Filter Included - Strategically placed fan and dust filter provides good thermal solutions and a dust-free interior
• Style that’s Versatile - Use the B1 to match your lifestyle! Setup Your PC vertically or horizontally! Stand it up and use it as a headphone stand!
• Preinstalled InWin 200W PSU - The B1 comes with a custom InWin 200W 80 PLUS Gold PSU It’s designed specifically for the B1’s small footprint
• User Friendly Design - The easy pop-off top that makes the building experience easier despite the smaller frame

User questions & answers

Question:	Does case require low profile memory. If so could i get a recommendation for 8g. For intel i3 build. Never built a system
Answer:	Not specifically, but some of the taller memory may be an issue. I used a set of Team Group T-Force Vulcan Z ( TLZGD416G3200HC16CDC01) in one of my builds and it was fine. As far as a suggestion, it depends on your motherboard. I would suggest going to the MFG website and looking at the Memory compatibility list. Of if you want to cheat use PCPartpicker. They are usually pretty good with compatibility.
Question:	Does this fit 15mm 2.5" HDD
Answer:	Yes -- it will hold 2 15mm drives. When you remove the bottom panel the drive area is just over 15mm high.
Question:	Is there a way i can upgrade the psu? i need closer to 400 watts
Answer:	Basically, no, the case has specialize PSU form so the option to upgrade is pretty much limited. Unless you're willing to use a Pico PSU or a more general term: a combination of a AC-DC adapter and a DC-DC ATX converter. And a more extreme method that I did is heavily modify the case to the point that void warranty to fit in an flexPSU inside it (I'm not recommend this).
Question:	Is there room to put An El Gato capture card
Answer:	No, no room for expansion cards.

Product features

InWin B1 Mini ITX-Chassis

Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs, light gaming PCs or even a LAN rig. The B1s exterior represents our insistence on performance and aesthetics. Integrating ventilation in the design offers no compromise to form or function. The depth of the chassis allows approximately 60mm for heatsink-clearance. Granting enough room for most AMD and intel coolers.

Extremely Small Footprint

Size does matter! The B1’s extremely small footprint is perfect for small form factor builds such as HTPCs, light gaming PCs or even a LAN rig.

Vents Incorporated in the Streamline Design

The B1's exterior represents our insistence on performance and aesthetics. Integrating ventilation in the design offers no compromise to form or function.

Fan and Dust Filter Included

Strategically placed fan and dust filter provides good thermal solutions and a dust-free interior.

Preinstalled InWin 200W PSU

The B1 comes with a custom InWin 200W 80 PLUS Gold PSU. It’s designed specifically for the B1’s small footprint.

Product description

Chopin is an ultra slim form factor case designed for the most efficient and user friendly experience. It is only 3.3 liters in size, but comes with various multi-functional features. Chopin features a 4mm brushed aluminum shell that complete a clean and sleek chassis frontal. Customize your front I/O panel with four different I/O stripes, creating your own unique style.

• Ultra slim form Factor case that can be positioned horizontally or vertically for space saving
• Aluminum, SECC Mini-ITX tower
• Includes 150W power supply
• Customizable I/O panel with four color stickers
• Top and side mesh panel design provides for excellent ventilation

User questions & answers

Question:	Can the venting and ports be on the right side of the machine, as looking at it from the front
Answer:	I don’t believe the venting is interchangeable because it would mean the mobo would also need to be interchangeable
Question:	Can it fit a small gtx
Answer:	With the help of a riser cable you may be able to fit a single slot low profile GPU in with some basic modding. Very much not recommended however.
Question:	I can't pull the trigger until i find a better psu with more overhead (@180-200w) anyone know a good psu replacement
Answer:	Search for a Mini ITX Flex PSU. I've seen them as high as 350w. It'll be another $100 though probably.
Question:	Can psu fan be replaced with something silent
Answer:	IF you are a tech, and know how to open and repair a power supply then you could replace the fan. But why would you, it's quiet already?

Product features

InWin Chopin

Chopin is an ultra slim form factor case designed for the most efficient and user friendly experience. It is only 3.3 liters in size, but comes with various multi-functional features. It has everything you need, and nothing you don’t. Four color I/O stripes allows you to customize your own case with your unique style. Ultra small form factor design takes little space on your desk, and it can be positioned horizontally or vertically for maximum space saving.

Supports 2 X 2.5" SSD

Innovative dual layout structure with 2 x 2.5” drive bays located at the other side of motherboard main plate for maximum expandability in a compact size.

Mesh Panels

The top and side mesh panel design enhances the heat dissipation and provides excellent ventilation.

150W Power Supply Included

A small, yet powerful 150 watt adapter features low noise and maximum efficiency. It is also 80 Plus Bronze.

InWin Chopin

• CPU Heatsink Compatible
• CPU die surface to side panel height: 43mm Maximum
• Motherboard to side panel height: 51mm Maximum

Power Supply Compatibility AC Input / Efficiency

• 150W Internal PSU Included
• 100-240V / 80 PLUS Bronze

M/B Compatibility

• Mini-ITX (Max:6.7" x 6.7")

Product description

Difference to K55 v1

1.Dimensions are identical, all parts are the same.

2.Improved Anodizingprocess for less dents and scratches, more QC process.

3.Changes topackaging, Now has white 90% and brown 10% boxes.

◆◆◆CAUTION!◆◆◆

The PCIE riser is PCIE3.0*16 compactible, if all your parts supports PCIE 4.0 (CPU: Intel Gen 11, AMD Zen3; MB: Intel Z490AMD X570 B550; GPU: N 30series A 5xxx & 6XXX), you will have to manuallysetup the BOIS to PCIE 3.0*16, and there will be 1~2% performance loss (Testedon RX6800 @ R7 3800X, PCIE riser VS Direct insert)

If you have met any problem/questions after receiving the item, you are mostly welcome to contact me through Amazon message or contacts enclosed in the product. 100% customer satisfaction is in pursuit.

SPECs

◆Model: K55 V2

◆Dimensions: 11*30*17cm (4.3”*11.8”*6.7”)

◆Material: Magnesium alloy frame, Acrylic side panel

◆PCIE Extension Cable included, SG01.

SYSTEM REQUIREMENTs

◆Graphics card: 300mm length, 43mm/53mm of thickness, support standard 2slots card. PCIE Extension Cable included, SG01.

◆Mother Board: ITX 17*17cm

◆CPU Heat Sink: within 55/65mm of height

◆Power UNIT:SFX, recommend to install the fan towards graphics card

◆HDD: 7mm2.5" * 2 supported

◆Memory:<58mm height

• Dimensions: 11*30*17cm (4.3”*11.8”*6.7”)
• Small Compact Clear design
• Transparent Acrylic Side Panels
• SG01 PCIE Riser Included. Supports Graphics Card: 2 slots, length < 30cm
• Ajustable side panel distance by entension screws (Included)

User questions & answers

Question:

Will you sell the aluminium side panel option in black? I will for sure buy this case from you for the fast shipping, but i need in black not silver

Answer:

Sorry, but no black side panel available in the near future. The black colour is made by additives in the liquid of oxidation process, silver and black are different additives. The manufactory accepts only orders above 1k. Due to the small number of side panels made, even the silver panel is little bit expensive. One thing I can suggest is using Metal paint to paint the silver side panel black, after the anodic oxidation the silver panel is easy to attach paint (but hard to remove). You can buy one piece of side panel to have a try, if you fail, I’ll refund your order.

• Cube design with full mesh on the front panel. Case size 328*260*202mm / 12.91*10.24*7.95in [When installing, please be careful of the panel!]
• Support 270mm/10.63in graphics card; Support a 120mm/4.7in liquid cooling radiator; Maximum support 160mm/6.3in height CPU Cooler.
• Mini tower with great expandability that supports up to 1 x 3.5" HDD and 1 x 2.5" SSD
• Support ITX motherboard(170*170mm/6.7*6.7in) motherboard.
• Minimalist I/P Ports Design: 1x USB 2.0, 1x USB 3.0, 1x Headphone, 1x Mic Ports
• Please feel free to contact us if you have any question or inquiry, we will resolve it within 24 hours.

User questions & answers

Question:	How many fans can you mount
Answer:	Only one
Question:	I got a matx 195 mm(w) x 170mm(h) board... will it fit
Answer:	Matx mobos won't fit only mini itx.
Question:	Would a asrock q1900m motherboard (227mm) fit
Answer:	Yea
Question:	For the n1 case, description says 240mm radiator fits in front? does that fit with a psu installed? or should i use a 120mm radiator on back? thanks
Answer:	Yes dear, it fits with a standard PSU install at the front , then you can use a 120mm radiator at the back. Thanks for your query!

Product features

Cooling

N-1 mini case is reserved with 2 water-cooled holes, and a 120mm fan position is reserved on the back, which is compatible with 120mm water cooling.

The power supply position of the chassis is designed with a large area of heat dissipation holes, and the air passage is integrated with the water cooling and heat dissipation to ensure stable operation of the power supply.

Notice: case comes without any fans or radiator.

Mini size big world

GOLDEN FIELD N-1 is a super compact case for your super compact needs. Small inner space design can hold a big world, hold back from its expertise in creating strong, well-cooled chassis.

Tool-Free Installation

The fully modular tool-free drive cages to provide the ease of installation/removal and maximize the interior space for highly customizable layouts.

For High Performance In A Small Size

N-1 ITX mini case offers maximum flexibility within the smallest of space.

It compatibles with 270mm display card and 170*170mm ITX motherboard.

A small size, smart look with a strong inner heart to give you a powerful mini system.

Qualilty

Good quality is inseparable from sophisticated craftsmanship.

The panel of the N-1 mini case is designed with simple full punch mesh.

The bottom of the machine case and the top of the machine case are all equipped with cable holes to keep the inside of the machine case beautiful and concise, conducive to the effective heat dissipation of the internal air duct.

When installing, please be careful of the panel！

Product description

Thermaltake Core G3 mini-tower chassis with two preinstalled 120mm fans and removable filters, supporting up to ATX MB. Keep everything you love in the living room with the newest member of Thermaltake core Series – the Core G3 Slim ATX chassis, specially designed for 4K Virtual reality (VR) gaming system, offing an incomparable cooling performance and compatibility with style and personality. Enjoy your games, music, stream or movies all from one device. P/N: CA-1G6-00S1WN-A0Series: Versa Case Type: Micro Case Dimension (H x W x D): 378 x 198 x 411 mm (15 x 7. 8 x 16. 2 inch) Net Weight: 3. 5Kg Side Panel: No Window Color: Exterior & Interior : Black Material: SPCC Cooling System Rear (exhaust) : 120 x 120 x 25 mm Turbo fan (1000rpm, 16dBA) Drive Bays Accessible: 1 x 5. 25’’ Hidden : 3 x 3. 5’’ or 3 x 2. 5’’ Expansion Slots: 4 Motherboards: 6. 7” x 6. 7” (Mini ITX), 9. 6” x 9. 6” (Micro ATX), LCS Upgradable: N/A I/O Port : USB 3. 0 x 1, USB 2. 0 x 1, HD Audio x 1 PSU: Standard PS2 PSU (optional) Fan Support: Front: 1 x 120mm or 2 x 120mm Top: 1 x 120mm or 2 x 120mm Rear: 1 x 120mm Radiator Support: Front: 1 x 120mm or 1 x 240mm Top: 1 x 120mm or 1 x 240mm Rear: 1 x 120mm Other: CPU cooler height limitation: 155mm VGA length limitation: 315mm.

• Stay slim: A perfect compact micro slim chassis design fit at your desk or living room
• Dual placements layout: Designed for horizontal or Vertical layouts, the Core G3 takes both angles for even more
• Lan party ready: GPU padded braces and travel foams to secure your hardware while traveling
• Floating GPU design: Bring your GPU power to the forefront With a custom GPU mount, turning the GPU face front for an unprecedented look
• Fully modular: Provides multiple configurations and flexibility for custom PC enthusiasts
• 2 Drive bay: 2. 5"/3. 5” x 2 with HDD cage
• Optimize system ventilation: 2 120 millimeter front fan pre installed

User questions & answers

Question:	how tall is the case while laying on its side
Answer:	It's about 5.5" high if laying on its side (without the fee attached so add about half an inch if using those).
Question:	How many 3.5 inch hard drives can this fit
Answer:	Depends on you ingenuity but 2 fits comfortably.
Question:	Will this case accomodate a corsair rmx850 psu
Answer:	The case only supports SFX power supplies. The Corsair RMX850 is ATX12V and is too large.
Question:	Does this come with the custom gpu mount
Answer:	yes it does. and the ribbon to relocate. if you have a small gpu, you wont need the mounting riser tho, only if its over 11”

Product features

Thermaltake Core G3 Gaming Slim ATX Chassis

Keep everything you love in the living room with the member of Thermaltake Core series – the Core G3 slim ATX chassis, specially designed for 4K virtual reality (VR) gaming system, offing an incomparable cooling performance and compatibility with style and personality. Enjoy your games, music, stream or movies all from one device.

Impeccable 4K & VR Living Room Gaming Experience

The Core G3 has been carefully thought out on compacting a high-end desktop performance with liquid cooling ability that support 4K and VR gaming system into the new slim form factor that allow you to slide into, place directly next to or on top of a TV stand along with 4K TV and home theater. The Core G3 is compatible with up to NVIDIA Geforce GTX 1080/1070.

Two-Way Placement Layout

Built for customization that reflects the gamers’ personality, the Core G3 allows users to adjust the chassis for the best viewing presentation while ensuring outstanding cooling performance. Users can choose to display it on any surface of their choice either vertically or horizontally.

Designed for Small Form Factor – Toughpower SFX 600W Gold (Optional)

Incorporating various high-quality components, Toughpower SFX 600W Gold is the best choice for those who are looking for the excellent balance between cost and 4K gaming performance.

Handy I/O Ports

The front-top panel is designed two USB 3.0 data transfer ports along with two standard USB 2.0 ports, a HD microphone and headset jacks, to grand direct access when needed.

Superior Liquid-Cooling Solutions

The Core G3 has the capability to deliver an outstanding cooling efficiency throughout the entire case. Especially, it enables users to install up to either 240mm DIY liquid cooling radiator, or 240mm AIO liquid cooler, with a long graphic card at the same time. Additionally, two 120mm turbo fans are preinstalled at the front to optimize system ventilation. To keep the interior dust free, all intake ventilation holes are specially designed with removable dust filters.

Supreme Hardware Support

Designed for high-end gaming system, the Core G3 supports motherboards up to standard ATX, a tower CPU cooler with maximum height 110mm, and a dual expansion slot VGA of up to 310mm in length without front fan. A PCI-e riser cable is included. Moreover, with the tool-free drive bay design, users can easily mount up to two 3.5”/2.5” storage devices into the build.

Product description

The Elite 130 is the successor to the widely popular Elite 120 Advanced mini-ITX computer case by Cooler Master. This time around, a meshed front panel has replaced the Elite 120's aluminum panel for enhanced cooling performance. Additionally, HDD/SSD mounting have been rearranged to allow water cooling support at the front of the case, adding to the overall enhancement of cooling performance. If you're looking to build your next system inside a small profile chassis, the Elite 130 is the way to go to ensure that your components stay nice and cool.

• Meshed front panel for increased intake of ambient cool air
• Supports Mini-ITX motherboards for small profile builds
• Unique HDD/SSD mounting bracket positioning allows more space inside
• Supports 120 mm water cooling kit at the front of the case
• Supports standard length ATX PSU
• Compatible with long graphics cards - up to 13.5 inch (343 mm) long
• Includes one 120 mm fan at the front and one 80 mm fan on the side

User questions & answers

Question:	Does this come with a power supply? If not, what would be recommended
Answer:	Does not come with a power supply, but it's very flexible. Just make sure if you get an ATX motherboard that you get an ATX power supply (or micro, mini power supply). I'm using a non-modular that will require a lot of cable hiding, but there's plenty of space to hide cables out of the way.
Question:	Can someone give me the exact specs to this case like width length and hight and also how much room is there for a CPU cooler
Answer:	Everything you request is listed in the manufacturer's info above for the Cooler Master Cosmos II, but some of it conflicts with these answers. For example, CPU cooler height is shown as 190mm/7.48" (not 6.5mm/2.5"), which is more consistent with the large size/width of the case itself. It seems like these comments are not all about this case, so I suggest anyone considering it do his/her own research.
Question:	To anyone who built in this case, and installed a non modular psu, how was it? I was thinking about buying a non modular sfx
Answer:	I did. A PC&Power Cooling 1KW SR PSU that's about 12-15 years old and still going strong. The unused cables, just folded each cable and zip ties them and tucked them behind it. The PSU is huge too. It almost reaches the bottom HDD cages. Another benefit of this case as it won't fit in a lot of cases.
Question:	Can this support three(3) red LED 80 mm fans? thanks
Answer:	I believe it will only support two 80mm in the lower rear section of the case. The other rear fan on the upper section is a 120mm fan, as are the front two (or four if you double up with a radiator.) There is also a 240mm fan mounting on the top.

Product features

Elite 130

Just because you don't have the space, doesn't mean you can't build big. The Elite 130 is a small Mini-ITX case intended to hold some big time hardware. With room for modern full-length graphics cards, it means having a system that can handle anything you throw at it without taking up the space you'd expect. A system inside the Elite 130 would feel just as at home on a desk as it would in a home theater system.