10 best computer cooling case

• 【Intelligent Speed Control】5 pcs 120mm full function PWM fans. The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep the fans quiet. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one. Please connect the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard.
• 【Dual Light Loop Design - Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller - 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote.
• 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.4dBA.
• 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs. Wireless RGB controller, more advanced wireless control dimming technology than infrared, you can still switch the light mode without aligning the light source.
• 【Sync with Motherboard’s RGB/ARGB Port】12V RGB sync and 5V ARGB sync connector, 4 pin PWM power connector. Please connect the fan ARGB connector with control box one by one. To avoid making reverse connector, please follow the silk mark instruction strictly when you insert the connector to the control box. Suitable for liquid cooler and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc)

Product features

SilentPro 9 Fan Blades

9 fan blades and the surface airflow guide groove is used to process a large amount of air and concentrate the wind on the leading edge of the blade for higher wind pressure and quieter.

Hydraulic Bearing Technology

Hydraulic bearing with longer service life to reduce noise/oil overflow and improve heat dissipation efficiency. Life expectancy can exceed 30,000 hours.

Double-sided Silicone

The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads which can make the internal operation of the computer case stably and reduce the noise output.

PCCOOLER: One of Top Leader in Case Fans

Please kindly read the quick install guide at first before installing the fans.

Support 120/240/360mm radiators, motherboard ARGB (+5V/3Pin) and RGB (+12V/4Pin)

Motherboard software synchronization mode to build your own lighting control system. The fan cable is 60cm, compatible with most computer case. The best choice for computer gamers.

These PWM pc cooling fans sync with ASUS, MSI standard motherboard and Gigabyte motherboard (there’s extra 5V-VDG adaptor cable).

Package Contents:

5 x Corona 120mm PWM Fan

20 x Fan Screws

1 x SATA Power Input Connector + Fan PWM Cable

1 x 12V-RGB Sync Cable (ASUS/MSI)

1 x 5V-ARGB Sync Cable

1 x Gigabyte 5V-VDG Adaptor Cable

1 x 1-To-5 Fan Strip Cable

1 x Quick Install Guide

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
• Motherboard support: Mini-ITX, MicroATX, and ATX

User questions & answers

Question:	I bought the h510 elite. my question is: do i need the hue 2 device if i decide to add an extra rear nzxt fan aer rgb 2? or i can use the smart hub
Answer:	Hello! No, you will not need the hue 2 device in order to add another AER RGB 2 fan. The included smart controller v2 will be able to accommodate up to 4 RGB fans in the system :)
Question:	Are the fans that come with this PWM fans
Answer:	No just 3 pin, non-controller-software-enabled. Plus you only get 2. Buy fans separately that are pwm and get 4 of them. There is room for two 140mm or smaller fans on the front and one top fan, one rear fan.
Question:	How much space is there in the back for cable management
Answer:	Plenty of space. best cable management i've seen
Question:	Does the h510 elite come with fans
Answer:	yes 2 exhaust fans one in the top one in the rear both 120mm, the top can be changed for a 140mm

Product features

H510

The H510 and H510i compact mid-tower ATX cases are both stunning and an excellent value. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, multiple fan filters, and front USB 3.1 Gen 2 type-C are just some of the amenities.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.



Features:

Product Dimension: 140x 140 x 25mm 

Operating Voltage: 12V

Rated Power: 4.2W

Rated Voltage: DC 12V

Rated Current: 0.35A

Airflow: 49.8cfm

Fan Speed: 1500(+/-10%) RPM

Sound Level; 29dBA

Connector: 3/4pin connector

Bearing Type: Hydraulic Bearing

Lifetime: 20000Hrs



Compatible: 

3-pin power connector for powered by motherboard 

LP4(Molex IDE 4-pin) power connector for powered by PSU power supply



Package Contents: 

3 x 140mm Cooling Fan

12 x Mounting Screws

Item in well protected retail packaging

• Four LED Colors Available: As a excellent LED cooling system, It has four LED color for customer choose: Red/White/Blue/Ice Blue, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light.
• Features standard 140mm mounting holes :  140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency.
• Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1500RPM at low 29dBA and deliver an air flow of up to 49.8CFM
• Anti-vibration Mounting System:  The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA
• IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.

User questions & answers

Question:	Are the screws included
Answer:	They should. The rca are outputs, just like the spdif and stereo jack are as well.
Question:	Are these 4-pin (PWM
Answer:	Yes, only if the attached devices stops transiting any signal when you switch the off. It's meant to auto switch to which ever device sends a signal. So it will not auto switch if you have a DVR as its always traistting current.
Question:	What does it mean when they say "use only one type of power connection at a time
Answer:	Yes, this worked on my Roku(2). HDMI from Roku to the Tomsenn, then from the Tomsenn out to the TV and stereo. Works great for me!
Question:	are these more like just airlow fans or also like a static pressure fan
Answer:	I only use it with 5.1 surround so I don't know how it will work with 7.1, I suspect you will only get 5.1 output.

• 120mm x 120mm x 25mm | Up to 1500 RPM +/- 10% (maximum RPM) | Noise (dBA)26 dBA | Airflow (CFM) 66.2 CFM
• Seven fan blades and a sleeved bearing system for less vibration, noise and turbulence
• High static pressure for efficient radiator or heatsink cooling
• RoHS compliance for protecting the environment
• 2 Year Warranty | Up to 50,000 hour life span! | 4 Pcs mounting screws included

User questions & answers

Question:	Can this be ran AC voltage
Answer:	Yes the screws are included
Question:	what adapter does it use? Does it come in the box or do i need to buy it separate
Answer:	Yes. It's 3/4pin connector PWM fan.
Question:	How does it hook up to power
Answer:	Two power connections come out of fan, a 3 pin that goes directly to fan inputs on motherboard and 4 pin Molex connectors that come from power supply. You can use either one but not recommended to use both. It’s a nice touch to have options. I’m using the 3 pin and tucked away the Molex. Nice fans still going strong, I’m using the white.
Question:	Does the 2 pack come with 2 fans but only include 1 screw to put 1 fan on
Answer:	I would consider them more of an air flow fan, also if you were to mount them to your radiator the LED would need to point to the radiator in most setups because the LED is only on one side.

Product features

Vetroo Signature Series 120mm LED Computer Fan

Heat is the #1 cause of hardware failure. Adding Vetroo Case Fans can improve system stability and longevity by providing additional cooling and improved airflow. Case cooling is becoming more essential these days. The better airflow inside your system, the cooler and more stable system you will get.

EYE CATCHING LED ILLUMINATION

Vetroo 120mm Purple Fan keeps your system cool while illuminating your case with vibrant colors. Even more reasons to show off your system to the world. Maintain color and brightness uniformity. The lighting effect is visible from all directions and adds aesthetics to the chassis

HIGH PERFORMANCE

• Airflow (CFM) 66.2 CFM
• Up to 1500RPM ±10% (maximum RPM)
• Better performance than standard case fans
• Ultra-thin fan blade for less noise and turbulence
• Rubber pad and hydraulic bearing self-lubricates with a high quality, molded vibration damping surface which ensure less vibration, noise and turbulence.
• Service life up to 50,000 hours

CONSTRUCT TO LAST

Vetroo fan is tuned for high-airflow and large volume air-flow to keep your computer cooler! Our fan is combined with the technology that will reduce the noise and efficient. Vetroo fan is ideal for mounting at the rear or top of your PC case as exhaust fans for your PC’s motherboard and CPU, graphics accelerators, and other components that fill the case with heat

Product description

General Information

Brand: Rosewill

Model: CULLINAN MX-Blue

Details

Type: ATX Mid Tower

Color: Black

Case Material: Steel / Plastic / Tempered Glass

With Power Supply: No

Motherboard Compatibility: Micro ATX / ATX / Mini-ITX

Side Panel Window: Yes

LED: Blue

Expansion

External 5.25"" Drive Bays: No

Internal 3.5"" Drive Bays: 4

Internal 2.5"" Drive Bays: 5

Expansion Slots: 7

Fan Options

Front: 3 x 120mm / 2 x 140mm Fan (3 x 120mm Blue LED fan pre-installed)

Top: 2 x 120mm Fan / 2 x 140mm Fan

Rear: 1 x 120 / 140mm Fan (1 x 120mm Blue LED fan pre-installed)

Dimensions & Weight

Max GPU Length Allowance: 360 mm

Max CPU Cooler Height Allowance: 170 mm

Dimensions (H x W x D): 18.98" x 8.85" x 17.13"

Weight: 20.28 lbs.

Features

I/O Ports: 2 x USB 3.0, 2 x USB 2.0, HD Audio In/Out, Fan Speed Control

120 mm Fans:

3 x Front Blue LED (pre-installed)

1 x Rear Blue LED (pre-installed)

2 x Top (optional)

140 mm Fans: 2 x Top (optional)

80 mm Fans: 3 x on the PSU Shroud (optional)

Supports 360 mm Water Cooling Radiator in Front

Supports 280 mm Water Cooling Radiator on Top

Supports up to 170 mm tall CPU Cooler

Supports up to 360 mm long VGA Card

Tempered Glass Front Panel and Side Panels

Top and Bottom Dust Filters

NOTICE: Please make sure your motherboard equipped with on-board USB 3.0 socket before purchasing.

Supports up to standard ATX motherboards

• 3 sides of sleek and sturdy tempered glass in front and both sides to show off hardware and internal components
• Customizable and ventilated PSU shroud basement supports 3 x 80mm fans to promote heat dissipation
• Excellent airflow from 4 pre-installed 120mm blue LED cooling fans; supports up to 2 additional 140mm fans on top or 6 total 120mm case fans; ventilate and keep your system temperatures low
• Optional 360mm radiator liquid cooling support in front; optional 280mm radiator clearance on top; supports up to 170mm tall CPU cooler

User questions & answers

Question:	Does this case comes with fans
Answer:	The power brick says 100-240V, but only comes with a US style power cord.
Question:	Does the very front glass piece come off
Answer:	No, there isn't a Cd-Rom
Question:	led fans wont stay one color
Answer:	No it only has video outputs. But maybe a DVI to USB-C converter will work, as it comes with USB-C port. USB-C ports can generally handle video in and out.
Question:	Specs mention "please make sure your motherboard equipped with on-board usb 3.0 socket before purchasing". the motherboard shows 3.1, is this ok
Answer:	Base, 1.7, Max, 3.3

Product features

Top Dust Filter

Magnetic dust filter on top protectively stays in place to minimize particle buildup and is easy to remove for cleaning.

Front Dust Filter

Large magnetic dust filter in front shields case fans and maintains particle-free, constant airflow.

PSU Dust Filter

Removable dust filter below PSU mount makes it easy to clean out excess dust from the bottom of the computer case.

Extra Ventilation

Improve airflow and clear away heat from the PSU shroud basement via built-in vents and adding three optional 80mm fans.

Storage Options

Install either two HDD or SSD drives on the cage, plus an additional two SSD with the included drive slots.

Additional Storage

Install up to two additional HDD or SSD drives on top of the PSU shroud.

Product description

The Elite 130 is the successor to the widely popular Elite 120 Advanced mini-ITX computer case by Cooler Master. This time around, a meshed front panel has replaced the Elite 120's aluminum panel for enhanced cooling performance. Additionally, HDD/SSD mounting have been rearranged to allow water cooling support at the front of the case, adding to the overall enhancement of cooling performance. If you're looking to build your next system inside a small profile chassis, the Elite 130 is the way to go to ensure that your components stay nice and cool.

• Meshed front panel for increased intake of ambient cool air
• Supports Mini-ITX motherboards for small profile builds
• Unique HDD/SSD mounting bracket positioning allows more space inside
• Supports 120 mm water cooling kit at the front of the case
• Supports standard length ATX PSU
• Compatible with long graphics cards - up to 13.5 inch (343 mm) long
• Includes one 120 mm fan at the front and one 80 mm fan on the side

User questions & answers

Question:	Does this come with a power supply? If not, what would be recommended
Answer:	Does not come with a power supply, but it's very flexible. Just make sure if you get an ATX motherboard that you get an ATX power supply (or micro, mini power supply). I'm using a non-modular that will require a lot of cable hiding, but there's plenty of space to hide cables out of the way.
Question:	Can someone give me the exact specs to this case like width length and hight and also how much room is there for a CPU cooler
Answer:	Everything you request is listed in the manufacturer's info above for the Cooler Master Cosmos II, but some of it conflicts with these answers. For example, CPU cooler height is shown as 190mm/7.48" (not 6.5mm/2.5"), which is more consistent with the large size/width of the case itself. It seems like these comments are not all about this case, so I suggest anyone considering it do his/her own research.
Question:	To anyone who built in this case, and installed a non modular psu, how was it? I was thinking about buying a non modular sfx
Answer:	I did. A PC&Power Cooling 1KW SR PSU that's about 12-15 years old and still going strong. The unused cables, just folded each cable and zip ties them and tucked them behind it. The PSU is huge too. It almost reaches the bottom HDD cages. Another benefit of this case as it won't fit in a lot of cases.
Question:	Can this support three(3) red LED 80 mm fans? thanks
Answer:	I believe it will only support two 80mm in the lower rear section of the case. The other rear fan on the upper section is a 120mm fan, as are the front two (or four if you double up with a radiator.) There is also a 240mm fan mounting on the top.

Product features

Elite 130

Just because you don't have the space, doesn't mean you can't build big. The Elite 130 is a small Mini-ITX case intended to hold some big time hardware. With room for modern full-length graphics cards, it means having a system that can handle anything you throw at it without taking up the space you'd expect. A system inside the Elite 130 would feel just as at home on a desk as it would in a home theater system.

• The standard 120mm computer case fan, compatible with the different types of chassis. High-performance fan for the CPU heatsink and water cooling system.
• The design is user friendly interface: a 3pin 4pin two interface design, compatible with any motherboard, power supply plug or other devices.
• Super Silent PC Heat Sink: all copper motor and rugged. hydraulic press bearings with self-lubricating antifriction material, reduce operating noise, improve efficiency, and run the noise less than 25 decibels.
• High-speed and high-brightness LED design, easy to install and improve airflow to maximize airflow for High capacity cooling, let your PC more durable.
• The quality assurance: If you have any questions, please contact us. The quality of our products, and will do our utmost to quickly and efficiently resolve your issue.

User questions & answers

Question:	Does the wire harness include standard wall outlet cord
Answer:	Yes
Question:	Can you change the colors from the motherboard when plugged in
Answer:	The ones I received are both white.
Question:	I plugged the fans into a working fan header and the lights turn on without the fans spinning. How do I fix this issue
Answer:	Thank you for your interest in the Tea Forte Tea Tray. We do no have the Tea Tray black color option available on Amazon.
Question:	The screws seem too thick for the fan. The holes are not or threaded. When securing most of the screws cracked the holes
Answer:	No power supply. Cord plugs into a charging port; not wall.

Product features

Superior RGB LED illumination effect

The Conisy AL-120 LED case fan boasts 32 independent RGB LEDs light to create vibrant lighting and visual effects.Elegant and soften blue lighted effects perfect match your PC's theme.

Hydraulic Bearing Design

The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The seal cap prevents leakage of the lubricant, and improves the lifespan of the unit, service life of more than 30,000 hours.

Created for Quiet

Unique 9 blades design is engineered to generate higher airflow without compromising on ultra-silent operation.Ultra-thin fan blades ensure less vibration, noise and turbulence.

Silent operation as an excellent choice for case cooling.

Two way installation:

Blow warm air out of the case. Draw cool air into your case.

They are ideal for mounting at the rear or top of your PC case as exhaust fans for your PC's motherboard and CPU, graphics accelerators, and other components that fill the case with heat.

and They are ideal for mounting at the front or bottom of your PC case as intakes fans.

Compatible:

3-pin power connector for powered by motherboard

IDE 4-pin power connector for powered by PSU power supply

IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.

Support multiple fans through IDE 4-pin Concatenation.

Product description

Sirius loop's larger blades and thinner frame allows the fan to generate more air, Which is efficiently pushed by the sickle-shaped blades. The large surface area creates more airflow and pressure. The center of the fan is also built with ventilation holes to cool the bearings and extend the fan's lifespan. The circular addressable lighting effect is complemented with black fan blades to add that solid touch of RGB lighting in PC builds. The dual-looped design provides users the option to install on either side. Connect Sirius loop ASL120 directly to the motherboard's addressable header. By simply connecting Sirius loop ASL120 to the Motherboard, the fan speeds can be automatically controlled through the signal sent to the Motherboard and effectively remove the heat from the chassis. Four shockproof rubber stands are strategically placed on the corners of Sirius loop ASL120 to keep its overall look and help reduce vibrations while in operation.

• Larger blades and thinner frame allows the fan to generate more air, Which is efficiently pushed by the sickle-shaped blades. The large surface area creates more airflow and pressure. The center of the fan is also built with ventilation holes to cool the bearings and extend the fan's lifespan.
• The circular addressable lighting effect is complemented with black fan blades to add that Solid touch of RGB lighting in PC builds. The dual-looped design provides users the option to install on either side.
• Connect Sirius loop ASL120 directly to the motherboard's addressable header. If your motherboard has an RGB header use the addressable RGB Controller provided (included with 3-pack only).
• By simply connecting Sirius loop ASL120 to the Motherboard, the fan speeds can be automatically controlled through the signal sent to the Motherboard and effectively remove the heat from the chassis.
• Four shockproof rubber stands are strategically placed on the corners of Sirius loop ASL120 to keep its overall look and help reduce vibrations while in operation.
• * The triple Pack includes an addressable RGB modular controller that allows fans to function without an addressable RGB motherboard. The lighting effect will function Independently though.

User questions & answers

Question:	Can i combine two kits for 6 fans somehow? i only want one controllers to control all 6 in the same case. (thermaltake core x71 case
Answer:	Yes you can. In most cases the controllers can removed and the fans can be combined with a hub. Whatever controls the hub controls all the fans
Question:	Is this actually 3 140mm addressable rgb fans? the price seems way off
Answer:	Yes it is.
Question:	Is this compatible with thermaltake tt sync sata powered 9 port addressable led controller tt premium edition
Answer:	The Thermaltake pure argb fans work very well with the sata powered controller, but you need an rgb header on your motherboard. Make sure you have that before you buy.
Question:	How would i get these to work with a z97 deluxe, i do not want to change color options through the controller
Answer:	Plug in the fans separately into the headers on the motherboard usually labeled "Fan 1, Fan2, etc" and that will supply power to your fans. As far as controlling the colors and timings, that is done through a controller that uses an addressable header to control changing of the colors. These fans are addressable. "Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome.. Air flow - 56.45 CFM. Noise level - 30.4 decibels Analog ARGB controller - low-profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green, teal, blue, White, Purple, and rainbow), 7 LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds."

Product features

16.8 Million Colors LED Design

Featuring 9 addressable LEDs,great light coverage,and uniform color and brightness,the built-in LED ring can paint your build with 16.8 million colors

Synchronize Your Gaming Station

Pure ARGB fans are available in 12cm, 14cm, and 20cm to fit almost any case, radiator, or AIO cooler

InWin Sirius Loop

Sirius loop's larger blades and thinner frame allows the fan to generate more air, Which is efficiently pushed by the sickle-shaped blades. The large surface area creates more airflow and pressure. The center of the fan is also built with ventilation holes to cool the bearings and extend the fan's lifespan. The circular addressable lighting effect is complemented with black fan blades to add that solid touch of RGB lighting in PC builds.

Intelligent PWM Cooling

By simply connecting Sirius Loop fans to the motherboard, the fan speeds can be automatically controlled through the signal sent to the motherboard and effectively remove the heat from the chassis.

Shockproof Rubber Stands

Four shockproof rubber stands are strategically placed on the corners of the Sirius Loop fans to keep the overall look and help reduce vibrations while in operation.

Easy Cable Connection

Connect Sirius Loop fans directly to the motherboards addressable header and control the lighting effect through the motherboard software. Compatible with:

• ASUS Aura Sync
• GIGABYTE RGB Fusion
• ASRock Polychrome Sync
• MSI Mystic Light Sync

InWin Sirius Loop 3-Pack

Sirius Loop 120mm x 3

Addressable RGB Fan Cable x 3

Addressable RGB Y-Cable x 3

Addressable RGB Modular Controller x 1

Fan Screws x 12

Pins x 3

Product description

Rosewill RFTL-131209B 120mm Red LED Cooling Case Fan for Computer Cases

• Fan Size: 120mm
• Bearing Type: Long Life Sleeve
• RPM: 2000RPM +/- 10%RPM
• Air Flow: 59.8 CFM
• Noise Level: 36 dBA

User questions & answers

Question:	are these the same as the ones in my blackhawk ultra case
Answer:	Hi, this listing is for 2 fans per order and includes screws for each fan. Thank you

Product description

"Meshify strikes an aggressive pose in the Fractal Design lineup with unparalleled cooling performance and a defiant new look. Like Black Diamond facets, The angular asymmetry of the Meshify C carves a space uniquely its own as a new Force in high-airflow design.an open ATX layout with intelligent space utilization creates an unrestricted airflow Path from the mesh front intakes directly through key components to exhaust, ensuring heat is never an issue. The Meshify C has a remarkably compact footprint with the high-end component support of a larger tower, and with seven fan mounts and multi-radiator liquid cooling capability, It has the cooling capacity to match.

• Streamlined high-airflow design; Two preinstalled Fractal Design Dynamic X2 GP-12 120 mm fans deliver optimum airflow with minimal noise
• The performance and capacity of a larger tower in a remarkably compact mATX designed tower
• Angular mesh front panel maximizes air intake
• Tinted tempered glass side panel for a clean looking exterior with full interior visibility
• Distinctive styling with stealthy black-on-black aesthetic

User questions & answers

Question:	Will this fit a gigabyte z97-hd
Answer:	The Blackhawk Ultra case can use the RFTL-131409R model fans to replace the preinstalled fans in the front of the case.
Question:	Is this atx or micro-atx?.. the title model name here doesn't see to fit the measurements in comparison to newegg or pcpartpicker with the same model
Answer:	No it won’t run on Alternating Current. These are 12 volt DC fans traditionally for computers. Search for 120mm AC 120v fans to find this size in AC. They exist.
Question:	Will it fit 240mm raditor on top
Answer:	No it is 1
Question:	How many fans can this fit, and are they 140mm or 120mm
Answer:	Hi, the fan uses 3/4 pin molex connectors. Thank you

Product features

Fractal Design Meshify C Tempered Glass

Meshify strikes an aggressive pose in the Fractal Design lineup with unparalleled cooling performance and a defiant new look.

Like diamond facets, the angular asymmetry of the Meshify C carves a space uniquely its own as a new dominant force in high-airflow design with stealth-inspired aesthetics for exceptional style.

A compact yet spacious open layout creates an unrestricted airflow path from front intakes directly through key components to exhaust, ensuring heat is never an issue.

Flexible storage options

Conceal up to 5 storage devices with an adjustable and removable drive cage beneath the PSU shroud plus dedicated SSD mounts behind the motherboard tray.

Versatile hardware support

Even the largest enthusiast-class GPUs leave plenty of room for thick triple-fan rads in the front. The adjustable drive cage can be moved or removed to fit even the lengthiest heavy-duty PSUs.

Unrestricted airflow

An open interior with full length ventilated steel power supply shroud hides drives and cabling to create an unobstructed airflow path from front intake to rear exhaust.

Dust filters

Easy-to-clean filters on the front, top, and base with full PSU coverage and convenient front access

Superior air cooling

7 total fan positions allow for extensive air cooling. Two Fractal Design Dynamic X2 GP-12 fans come preinstalled for maximum airflow, minimal noise and 100,000 hour life expectancy.

Vibration dampening

Sturdy steel trays and vibration-dampening rubber grommets cushion your drives for smooth, quiet and reliable operation.