13 best case pcs

Product description

We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-Speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.

• New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
• Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
• STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling
• Motherboard support: Mini-ITX, MicroATX, and ATX

User questions & answers

Question:	I bought the h510 elite. my question is: do i need the hue 2 device if i decide to add an extra rear nzxt fan aer rgb 2? or i can use the smart hub
Answer:	Hello! No, you will not need the hue 2 device in order to add another AER RGB 2 fan. The included smart controller v2 will be able to accommodate up to 4 RGB fans in the system :)
Question:	Are the fans that come with this PWM fans
Answer:	No just 3 pin, non-controller-software-enabled. Plus you only get 2. Buy fans separately that are pwm and get 4 of them. There is room for two 140mm or smaller fans on the front and one top fan, one rear fan.
Question:	How much space is there in the back for cable management
Answer:	Plenty of space. best cable management i've seen
Question:	Does the h510 elite come with fans
Answer:	yes 2 exhaust fans one in the top one in the rear both 120mm, the top can be changed for a 140mm

Product features

H510

The H510 and H510i compact mid-tower ATX cases are both stunning and an excellent value. Perfect when you want a small-footprint ATX case without sacrificing features. A removable radiator mounting bracket, flush tempered glass window, multiple fan filters, and front USB 3.1 Gen 2 type-C are just some of the amenities.

MORE MODERN

With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.

STILL BEAUTIFUL

The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

ENJOYABLE BUILDS FOR ALL

Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.

Product description

The CORSAIR 5000D AIRFLOW is a mid-tower ATX case that shows off your PC, and not its cables. An airflow-optimized front panel delivers maximum ventilation to your system, while CORSAIR RapidRoute cable management makes it simple to keep cables hidden from sight. Two CORSAIR AirGuide fans offer directed airflow, and a motherboard tray with customizable fan mounts lets you install multiple 360mm radiators.

• The 5000D makes a stunning, showpiece-worthy PC easy to build, and even easier to keep cool with the space and flexibility to mount multiple 360mm radiators.
• A high-airflow optimized steel front panel delivers massive airflow to your system for maximum cooling.
• The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single hidden channel, with an easy-access hinged door and a roomy 25mm of space behind the motherboard for all of your cables.
• Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling.
• A motherboard tray with customizable fan mounts allows you to side-mount up to 3x 120mm fans or up to a 360mm radiator, enabling new flexible cooling options.

User questions & answers

Question:	Soporta 360mm
Answer:	Please make sure the fan is also connected to a fan header on your motherboard. If you require any assistance please feel free to contact support via our website and we'll gladly assist you.
Question:	How do i get the fan to turn on? only the rbg is
Answer:	The 4000X has a transparent front panel that allows you to see the RGB lighting of your fans.
Question:	What is the difference between the 4000d and 4000x
Answer:	The 4000X RGB comes with 3 SP Elite RGB fans. The 4000D airflow comes with 2 AirGuide fans.
Question:	Does it come with rgb fans
Answer:	Absolutely. The case is pretty big. I too have the flak 2.0 and they definitely fit. Hope this helps

Product features

CLEAN AND COOL

An optimized steel front panel delivers massive airflow to your system for maximum cooling.

TAKE COMMAND OF YOUR COOLING

A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.

MODERN FRONT PANEL I/O

Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.

VERTICAL GPU MOUNT READY

With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.

• 【Motherboard Support】E-ATX, ATX, Micro-ATX, mini-ITX
• 【DUST-PROOF Design】 The upper and lower parts are equipped with dustproof filters, which can effectively prevent dust from entering the case and keep it fresh and cool.
• 【HONEYCOMB OPTIMIZED AIRFLOW】6 MVP 120mm RGB Dual light loop LED Fans pre-installed in this pc gaming case: 3 x Front, 2 x Top, 1 x Rear; up to 360mm long liquid-cooling radiator at front(optional). You can change the color and mode of the light through the RGB button.
• 【TEMPERED GLASS PANELS】To level up gaming experience for users, 903-S6 is equipped with 2*4mm thickness translucent Tempered Glasses in Galaxy Dark, which gives you a visible view of colorful RGB case.
• 【TOP I/O PANEL】1 x USB3.0 Port, 2 x USB2.0 Port, 1 x HD Audio, RGB Button, Power/Reset.

User questions & answers

Question:	Will it diliver to india
Answer:	It sho wil diliver india
Question:	The ad says the fans are 12v so i got a 4 pin 12v mobo and when it got here it says warning 5v 3 pin .... can i make this work
Answer:	The fans come plugged into a hub in the back of the case whenever it arrives, then you give power to said hub with a SATA power connector from your power supply. So, there's no need to plug them into the motherboard unless you would want to for some reason.
Question:	Rgb light reset after shutdown how to make it stay to my last light option
Answer:	You cannot, it does not have a memory module to save the setting.
Question:	would a msi proseries intel coffee lake h310 lga 1151 ddr4 d-sub dvi hdmi onboard graphics micro atx motherboard (h310m pro-vdh plus) fit
Answer:	You can go to pcpartpickers website and go to system builder and it will tell you the compatibility of all the parts you want to put in your computer

Product features

The Professional Detail Design

Complete with metal mesh on the left and right side of our unique honeycombed front panel for optimal air intake and dust proof.

Smart Mid Tower Case

Ordinary size which meet most gamers' DIY needs.

MVP SPORT RGB FANS

RGB fans with 7 colors split between two separate light loops allow for nearly endless customization.

Ample Airflow

Keep cool with 6 x 120mm RGB fans included.

Cable Management Made Simple

Cable routing channels with included velcro cable straps for clean cable management.

Remarkable Expansion

Support motherboards up to E-ATX ,ATX, Micro-ATX, Mini-ITX; mount for up to 3 x 3.5”HDD’s and 3 x 2.5”SSD’s.

Excellent Dust-Proof Design

Two removable dust filters on the top and bottom, achieve 100% ideal dust-proof.

Front & Rear

Show case your RGB lighting with a fully transparent tempered glass in the front.

7 Expansion slots in the rear.

Product description

The Fractal Design Define R5 is the next evolution in the widely popular Define Series. Packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling support, presented in a stunning Scandinavian inspired construction. The Define R5 case reaches the highest level of silent computing through strategically placed dense sound-absorbing material, ModuVent fan vent covers and finely tuned Dynamic Series fans. The Define R5 was designed with configurability in mind, accommodating up to 8 hard drives and all modern graphics card. Should you wish to expand your system with water cooling components or more fans the layout can easily be configured to meet your demand.

• Optimally designed for silent computing with high density noise-reducing material throughout the case for maximum sound absorption, while not compromising on airflow and cooling capabilities
• Extensive water cooling support for a case of this size; housing radiators up to 420mm in the top and 360mm in the front
• Newly, configured front door with dual side mounting to better fir your work space
• Highlighting 2 dedicated SSD mounts cleanly placed behind the motherboard tray that feature innovative new brackets delivering a tool-free installation and removal
• The HDD cage system holds up to eight 3.5" or 2.5" drives and is more adaptable than ever, allowing the user to modify the case layout according to personal preference with more places to relocate the cages
• Sturdy metal HDD trays provide excellent dampening features for the hard drives while providing better airflow through the cage with an updated, more open design
• The new and innovative Quick Release System on the left side of the case provides secure mounting of the left side panel, yet grants quick and easy access to the system.

User questions & answers

Question:	Does it come with screws
Answer:	Yes, it comes with all the standard computer screws assuming it's in the original unopened packaging from Fractal Design. If you're buying a returned package or used item then it may be missing some screws.
Question:	Do I need any particular tools to build a PC with this case
Answer:	At most a phillips screwdriver. This is the best designed case I think I've ever had. 100% modular. You can place the PS on all four corners (top and bottom). Both side panels come off easily and the off side has places to mount multiple SSDs so they are away from the heat, and a place to easily run the power cables. Al six sides can host multiple fans up to 140mm in size. Tons of room.
Question:	how many 5.25 inch and 2.5 inch dvd/bd or card reader drive slots are in the front
Answer:	There are two 5.25 inch bays but you'll need an adapter If you want to use one for a 2.5.
Question:	How many fans are included and what sizes are they
Answer:	Case comes with 2 140 mm fans,one mounted in front,one mounted in rear. I moved the one from rear to front, use 120mm radiator in rear w/120 mm fan and added another 120 mm fan in bottom between psu and hdd rack, running nice and cool with amd 9370 and gtx 970.and quiet!

Product features

Fractal Design Define R5 - Mid Tower Computer Case

The R5 is packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling support

• Optimally designed for silent computing with high density sound-dampening material
• Extensive water cooling support for a case of this size
• Equipped with tool-less ModuVent fan slot covers

Key features

• Optimally designed for silent computing with high density sound-dampening material throughout the case, while not compromising on airflow and cooling capabilities
• Extensive water cooling support for its size; housing radiators up to 420 mm in the top and 360 mm in the front
• Equipped with new tool-less ModuVent fan slot covers allowing the user to install more fans if desired or keep fan slots covered to maximize sound absorption
• Including two Fractal Design Dynamic GP-14 140 mm fans developed for superlative airflow while still maintaining low noise levels
• Three-speed fan controller is strategically integrated in the front panel and supports up to three fans

Storage features

• Two dedicated SSD mounts cleanly placed behind the motherboard tray, featuring innovative new brackets for tool-free installation and removal
• The HDD cage system holds up to eight 3.5” or 2.5” drives and is more adaptable than ever, allowing the user to modify the case layout according to personal preference with more places to relocate the cages
• The ODD cage can easily be removed to gain additional interior space; the area can be freed up to allow for increased airflow, to provide a new place for HDD cage mounting or to make more room for water cooling components.
• Sturdy metal HDD trays provide excellent dampening features for the hard drives while providing better airflow through the cage with an updated, more open design

• 【REMARKABLE EXPANSION】This excellent ATX Mid Tower Gaming computer case supports motherboards up to E-ATX, ATX, Micro-ATX, Mini-ITX; Internal Bays: 3 x 3.5 HDD's and 3 x 2.5 SSD's (Not included).
• 【POWERFUL COOLING SYSTEM】6 MVP 120mm RGB Dual light loop LED Fans pre-installed in this pc gaming case: 3 x Front, 2 x Top, 1 x Rear; up to 360mm long liquid-cooling radiator at front(optional). You can change the color and mode of the light through the RGB button.
• 【TEMPERED GLASS PANELS】To level up gaming experience for users, 907 is equipped with 2*4mm thickness translucent Tempered Glasses in Galaxy Dark, which gives you a clear view of RGB case.
• 【MUSIC LIGHT SHOW】Through the remote control, select the corresponding voice mode, the effect of the light will vary with the size of the music.
• 【TOP I/O PANEL】1 x USB3.0 Port, 2 x USB2.0 Port, 1 x HD Audio, RGB Button, Power/Reset.

User questions & answers

Question:	Were do i connect the fan? Motherboard or somewhere else
Answer:	You just connect power (4 pin molex) the control board handles everything else, though I'm sure you could remove one fan from the board and connect it directly to your motherboard and it will work too
Question:	Can it fit a 240mm rad on the top of the case
Answer:	I was able to fit a 240 on top. I think it will come down to the size of your VRM and RAM heat sinks
Question:	Is there any way to keep the fan color white without them flashing
Answer:	There are a ton of color profiles you can scroll through with the included remote, solid white is definitely one of them.
Question:	Do the fans work with Asus aura sync
Answer:	I got mine to work with Aura Sync. There was an RGB header on my MB that matched a cable for the fans. Then you hold down the RGB button on top of the case to switch control to the header.

Product features

ATX MID TOWER COMPUTER CASE 907

The tempered glass panels allow you to show gorgeous RGB lighting.

The voice-activated fan with remote control offers three music modes for you.

Mode 1- Symphony：The lights will on when you make a sound;

Mode 2- Horse racing：The lights will change with the beats of music;

Mode 3- Static：The lights will change in various colors when you play music.

Voice-activated fan with remote control

Three music mode offer a cool visual and auditory experience for you.

MVP SPORT RGB FANS

RGB fans with 7 colors split between two separate light loops allow for nearly endless customization.

Ample Airflow

Keep cool with 6 x 120mm RGB fans included.

Cable Management Made Simple

Cable routing channels with included velcro cable straps for clean cable management.

Excellent Dust-Proof Design

Two dust filters on the top and bottom, achieve 100% ideal dust-proof.

Tempered Glass Design & Anti-Collision Protection

Two tempered glass panels on the front and sides of the case. Which allow you to showcases gorgeous RGB lighting. The anti-collision protection can effectively avoid been slashed by glass.

Product description

The Rose will TYRFING offers tremendous capacity under one of the cleanest appearance Rose will has ever built. Although it's a relatively standard ATX Mid Tower, TYRFING, however, can fit in a 360 mm water cooling radiator on top and a 400 mm long graphics card. That's the capacity gamers are looking for and that's what Rose will delivers. Aside from the capacity, top-mounted I/O ports, tool-less 3. 5" Device installation, and dust filter on the bottom are all Featured in the Rose will TYRFING, helping you out with installation, maintenance, and daily operation.

• Spacious interior mid tower case with an expansive internal layout; supports large size motherboards (ATX/microATX/Mini-ITX) and component upgrades; supports VGA card up to 400mm long, CPU cooler up to 160mm high and PSU up to 300mm long
• Sleek and stylish design plus superior function makes this PC case ideal for performance builds, system integrations and professional gaming
• Supports optional 360mm AIO liquid cooler radiator on top and optional 120mm radiator in rear; fits optional 160mm CPU cooler

User questions & answers

Question:	I was wondering if i could fit this card in this case https://www.amazon.com/dp/b06y66k3xd/?coliid=innoikgs2o8r8&colid=9v4ke2x6fo3d&psc=0&ref_=lv_ov_l
Answer:	Yes, this case can support a graphics card up to 400mm in length.
Question:	Will this work for a tc-865-neselici5 motherboard
Answer:	This case supports Micro ATX / ATX / Mini-ITX Motherboard.
Question:	Why isn't the 2nd fan installed in the picture
Answer:	The front fan is mounted in-between the metal front of the case and the plastic bezel attached to the front of that on the lower part of the front. The rear fan is attached up high on the metal back plate inside the case.
Question:	do i plug the fan in to molex or mobo
Answer:	Your mobo should have a 3 or 4 pin connector for both your system fan and your CPU fan. You can plug additional fans into molex connectors from your power supply.

Product description

The Master Box NR600 applies optimal cooling and expandability to a minimalist, subtle design. With thermal capability at the forefront of features, the front panel and top panel are designed to signify airflow performance in its purest form.

• Minimalistic mesh design - Elegant design elements are applied to mesh for optimal thermal performance.
• Optimal thermal performance – the full mesh front panel and ventilated top panel provide a high potential for thermal performance.
• Flush Tempered glass Side panel design – The tempered glass Side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.
• Graphics Card support up to 410 millimeter – Generous clearance space is provided to support the latest graphics cards.
• With/without ODD support – depending on preference, an odd version of the chassis is available. If an odd is not preferred, a cleaner appearance and more cooling options on the top and front panels are supported.
• Headset jack – the single 4 pole headset jack features both Audio and microphone capabilities simultaneously so that separate jacks are not needed.
• Cable management – high quality, longer length rubber grommets and generous clearance behind the motherboard offers ample room for cable management.

User questions & answers

Question:	Does this case have a removeable psu shroud
Answer:	We advise only using the remote that comes with this fan.
Question:	will a mini-itx motherboard fit this case
Answer:	This ceiling fan is damp location rated only and not wet location rated.
Question:	Will this fit noctua nh-d15 cpu cooler fan and have enough clearance
Answer:	120V
Question:	Triple fans included
Answer:	The manufacturer recommends using a 24" downrod for a 12 foot ceiling.

Product features

MasterBox NR600

The MasterBox NR600 applies optimal cooling and expandability to a minimalistic design. With thermal capability at the forefront of features, the front panel and top panel are designed to signify airflow performance in its purest form.

Functionality is blended to a compact design by maximizing use of internal space and implementing subtle design elements. The MasterBox NR600 features a tempered glass side panel, fastened by thumbscrews on the rear panel, to keep the surface immaculately flush.

Flush Tempered Glass Side Panel Design

The tempered glass side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.

Optimal Thermal Performance

The full mesh front panel and ventilated top panel provide a high potential for thermal performance.

Fan and Radiator Support

Support for the following fan/radiator form factors: FRONT 120/140/240/280/360 mm radiator, 120 mm x 3 fans, 140 mm x 2 fans, TOP 120/240 mm radiator, 120/140 mm x 2 fans, REAR 120 mm radiator, 120 mm x 1 fan.

Dual Audio-Microphone Headphone Jack

The single 4 pole headset jack features both audio and microphone capabilities simultaneously so that separate jacks are not needed.

Drive Bay Support

Supports 4 x 3.5" HDDs and 5 x 2.5" SSDs.

Component Clearances

Supports GPUs under 410 mm, CPU coolers under 166 mm, and PSUs under 180 mm.

Product description

Excellent Expandability Supports motherboards up to standard E-ATX with high-wattage PSU and 3 x 2.5" SSD or 1 x 2.5" SSD+2 x 3.5" HDD, With extended graphic card support (up to 370mm) and CPU air cooler support(up to 160mm height), the case simultaneously protects the hardware and increases the CPU’s overclocking potential for users looking to get the most out of their hardware.

• Swing door window side panel design.
• 4mm window tempered glass (side & front panel)
• Mid tower supports E-ATX / ATX / MATX / ITX motherboards.
• Support 370mm length graphic card, CPU air cooler with height of 160mm.
• Maximum support 9 fans or 240mm top + 120mm rear water cooling system 【Caution: Fans and radiators are not included!】
• Please feel free to contact us if you have any inquiry or problem.

User questions & answers

Question:	Can i fit a 240mm radiator on top with a full atx motherboard on the z
Answer:	Yes, you can fit a 240mm radiator on top with a full atx motherboard on the golden field z21 pc computer case.
Question:	Would you be able to put in dual fans
Answer:	This case fits a two fan (240mm) radiator on top, or in front, you can put a two or three fan radiator (360mm) there. Only 1x120mm rear exhaust fan though. I’m not sure but I think you can fit larger fans if you don’t use radiators for water cooling. The case has more length than it seems in the pics.
Question:	Can the glass come off or just swing
Answer:	Yes. The glass could come off and swing. To completely come off, you would need to unscrew the hinges on the back.
Question:	Does it have an rgb cable
Answer:	No, dear, it doesn't have rgb cable, and not include fans either.

Product features

Excellent Expandability

Supports motherboards up to standard E-ATX with high-wattage PSU and 3 x 2.5" SSD or 1 x 2.5" SSD+2 x 3.5" HDD.

With extended graphic card support (up to 370mm) and CPU air cooler support(up to 160mm height).

The case simultaneously protects the hardware and increases the CPU’s overclocking potential for users looking to get the most out of their hardware.

MId Tower Size, Elegance Look

490mm x 432mm x 205mm, Full Tower Chassis features in mid tower size with 4MM tempered glass .

Swing Door Openable Side Panel

Swing open full window tempered glass panel allows users to demonstrate their DIY spirit and enjoy the ultimate internal component visibility.

Metal Frame

The front panel design by aluminum metal, It protects your hardware stably and looks elegance at the same time.

Product description

Build your battlestation with the TUF gaming GT501 case featuring seven drive bays, USB 3. 0 front panel, vertical GPU support and magnetic dust filters. Stay cool in battle with numerous cooling options including room for seven 120mm fans, two 360mm radiators, or custom water cooling with pre-drilled mounting holes.

• Mid-tower with support for EATX motherboards featuring a metal chassis and panels with custom TUF gaming spatter pattern and 4mm-thick smoked, tempered-glass full view side panel
• Keep your cool with three 120mm aura Sync rgb-illuminated fans, one 140mm rear PWM fan, and up to seven optional fan-mounting points
• Custom Liquid Cooling ready with support for top or front mounted 360mm radiators, rear mounted 140mm radiator, and pre-drilled water pump/reservoir mounting holes
• Vertical GPU expansion slot Plus 7 Traditional expansion Slots
• Ergonomic, woven-cotton carry handles enable easy and safe transport up to 65lbs

User questions & answers

Question:	Is a B550 Vision D motherboard compatible with this case
Answer:	Yes it will fit. every case has standoffs for different Motherboard types.
Question:	Can two 2080 graphics cards fit
Answer:	It really depends on which model you get as all the aftermarket coolers and such will have different dimensions but I would say, at least in regards to the founder's edition, yes. I have a Sapphire Nitro+ Vega 64 and it is a pretty beefy card, much larger than the 2080 FE and I could barely squeeze in a second one if I wanted to.
Question:	Can you hang this from the handles
Answer:	Yes, mine is fully loaded and I pick it up by handles
Question:	Are the handles on top removable
Answer:	They are!

Product features

ASUS TUF GT501 Case

Build your battlestation with the TUF Gaming GT501 Case featuring seven drive bays, USB 3.0 front panel, vertical GPU support and magnetic dust filters. Stay cool in battle with numerous cooling options including room for seven 120mm fans, two 360mm radiators, or custom water cooling with pre-drilled mounting holes.

Easy DIY

Integrated cable management ensures neatness, while pre-installed physical supports for the motherboard eliminates additional costs. 1. Cable grommet & Velcro wrap for cable routing 2. SSD bracket 3. Removable lid for water-cooling reservoir 4. 2 x vertical PCIe slots 5. PSU shroud 6. 3.5''/2.5'' anti-vibration storage bracket 7. Mounting points for water-pump-bracket at the bottom, 8. 30mm cable-management space 9. Preinstalled motherboard standoffs 10.Bottom supporting bracket for side glass

• DOOR OPENING DESIGN: Door opening side panel with magnetic design, it is easy to disassemble and tool free.
• LOWPOLY PANEL DESIGN: The front panel adopts Low poly design and give you the enjoyment of succinct vision.
• EXCELLENT LIGHT EFFECT: The black side glass shows the light effect in a low profile way. Meanwhile, the overall tempered glass design makes the inner view of the chassis broad.
• HIGH-QUALITY STRUCTURE: 0.6mm SPCC is painted to form the metal structure with impressive beauty.
• 240 MM WATER-COOLER COMPATIBLE: It could install 120mm*2/140mm*2 air cooler and 240mm water cooler ,making more options for users.

User questions & answers

Question:	What ones are the Ssd screws
Answer:	Small Phillips head screws. But just sort through and test them and you will find them that's what I did.
Question:	Viene con ventiladores
Answer:	No
Question:	Does this come with an IO shield
Answer:	No, your motherboard should come with the IO shield, as they are different for every motherboard.
Question:	Please for the love of God how do i remove front panel to install fans
Answer:	The front mesh panel has round plastic pins that clip into the front of the case squeeze these and gently pop the side out as you follow down the side of the case releasing all pins. This will release the front panel to install fans. The documentation on my case said that you could pull two screws to remove the fan housing but that was not accurate on the mint green dlm21 mesh case.

Product features

ITX / M-ATX

Water Cooling

Optimal Airflow

• 【REMARKABLE EXPANSION】This excellent ATX Mid Tower Gaming computer case supports motherboards up to ATX, Micro-ATX, Mini-ITX; Internal Bays: 2 x 3.5 HDD's and 3 x 2.5 SSD's.
• 【POWERFUL COOLING SYSTEM】6*120mm RGB Dual light loop LED Fans pre-installed in this pc gaming case: 3 x Front, 2 x Top, 1 x Rear; up to 160mm long liquid-cooling radiator at front(optional). You can change the color and mode of the light through the RGB button.
• 【TEMPERED GLASS PANELS】To level up gaming experience for users, it is equipped with 2*4mm thickness translucent Tempered Glasses in Galaxy Dark, which gives you a clear view of RGB case.
• 【CABLE MANAGEMENT & DUST-PROOF】This neatly internal design of the chassis provides convenient and decent cable management and airflow. Dust filters on top and bottom can effectively prevent dust from entering the computer case.
• 【TOP I/O PANEL】1 x USB3.0 Port, 2 x USB2.0 Port, 1 x HD Audio, RGB Button, Power/Reset.

User questions & answers

Question:	Which hard drive tray to buy for this
Answer:	There are two types of power connections: Molex (the bigger plug) and 3-pin. Use one or the other but not both. 3-pin connects to motherboard, Molex connects to Molex power from the power supply.
Question:	Is it compatible with a lincs motherboard or a asus rog maximus xi hero z390 gaming motherboard? also, once the pc is built, how do you turn it on
Answer:	You need to read the wiring diagram for the LED, the manual has a diagram, came with case. Sounds like the location on the led panel is misplaced on the board
Question:	are the RGB fans 3 pin 5v
Answer:	If you connect the sata into power supply then their is a button next to reset and power button it changes the colors. Hope that helped.
Question:	Is it Windows
Answer:	Everyone answered no. The fans do all kinds of colors and you can do all kinds of different settings. I dont know if that came with my motherboard or with the tower but they integrated well and I have them set to rainbow.

Product features

ATX MID TOWER COMPUTER CASE G05N6

The tempered glass panels allow you to show gorgeous RGB lighting.

The magnificent ARGB fans offer three music modes for you.

Mode 1- Symphony：The lights will on when you make a sound;

Mode 2- Horse racing：The lights will change with the beats of music;

Mode 3- Static：The lights will change in various colors when you play music.

The Professional Detail Design

Complete with metal mesh on the left and right side of our unique honeycombed front panel for optimal air intake and dust proof.

MVP SPORT RGB FANS

RGB fans with 7 colors split between two separate light loops allow for nearly endless customization.

Cable Management Made Simple

Cable routing channels with included velcro cable straps for clean cable management.

Dust proof design

Two dust filters on the top and bottom, achieve 100% ideal dust-proof.

Tempered Glass Design & Anti-Collision Protection

Two tempered glass panels on the front and sides of the case. Which allow you to showcases gorgeous RGB lighting. The anti-collision protection can effectively avoid been slashed by glass.

Ample Airflow

Keep cool with 6 x 120mm RGB fans included.

Product description

Bring out the modder within you. The Core P3 Tempered Glass Edition Open Frame chassis sets a new benchmark in groundbreaking open frame chassis design. With full support for liquid cooling and Thermaltake PCI-e X16 Riser Cable included - the Core P3 is built from the ground up to make even the most advanced PC customization and modification effortless and hassle free, making it a dream to build with. The open frame panel design is protected with a clear acrylic panel - behind which sits the chassis frame, with supports the latest PC hardware, AIO and DIY liquid cooling solutions. Specially designed dual GPU and PSU layouts, plus a 3-way stand placement (wall mountable, horizontal laying and vertical standing) allow users to position the chassis any orientation - and appreciate your artwork status worthy build.    P/N: CA-1G4-00M6WN-05 Model: Core P3 TG Snow Dimension (H x W x D): 512 x 333 x 470 mm (20.2 x 13.1 x 18.5 inch) Case Type: Mid Tower Net Weight: 11.3 kg / 24.91 lb Side Panel: 5mm Tempered Glass x 1 Color: White Material: SPCC Drive Bays: Accessible: 2 x 3.5" or 3 x 2.5" (Outside the chassis) Hidden: 2 x 3.5’’ or 2.5’’ (Inside the chassis) Expansion Slots: 8 Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Ports: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Fan Support: Left Side: 3 x 120mm, 3 x 140mm Radiator Support: Left Side: 1 x 360mm, 1 x 420mm Clearance: CPU cooler height limitation: 180mm VGA length limitation: 280mm (With Reservoir & Radiator), 450mm (Without Reservoir & Radiator) PSU length limitation: 200mm 3 year warranty

• Open Frame Panoramic Viewing: 5 millimeter Thick Tempered Glass at Front
• 3 Way Placement Layout: Wall mount, Vertical, and Horizontal placement
• Vertical GPU Mounting: One PCI E Riser Cable included
• Vertical PSU Mounting: Vertical PSU layout when ITX Motherboard is applied
• Dismountable Modular Design: Freely Build the System from the Ground Up with Given Modular Panels, Racks, Brackets, and Pre Design Mounting Arrays

User questions & answers

Question:	Can i fit micro atx asus rog strix b360-g motherboard into thermaltake core p
Answer:	The specifications for what can fit are as follows: 6.7 in by 6.7 in mini ITX, 9.6 by 9.6 in Micro ATX, 12 inch by 9.6 inch ATX. This is directly from the book that comes with it.
Question:	Does the thermaltake core p5 allow for a corsair hydro cooler such as the h110i 280mm cw-9060026-ww
Answer:	I have the H110i and the Core P3 and the built-in lines are almost to short. The extra depth of the P5 will probably make it near impossible to get mounted.
Question:	Is the pcie riser included? if so, is it the same riser used in core p3 or core p
Answer:	According to the MFG site, it should come with the riser cable. However, I've seen many complaints about the P5 risers and possible damage to GPUs. http://www.thermaltake.com/products-model.aspx?id=C_00003030
Question:	How many hard drives can this hold
Answer:	room for 2 drives hidden in the back (either 2.5" or 3.5"), 3 visible 3.5" drives, and 4 visible 2.5" drives. the 3 visible 3.5" drives occupy the same space as the radiator/fan mounts though.

Product features

Thermaltake Core P3 Tempered Glass Edition

The new Core P3 Tempered Glass Edition Open Frame chassis comes with a 5mm thick tempered glass front panel to provide durability and a clear view of the inner components. Core P3 TG supports the latest PC hardware, AIO and DIY liquid cooling solutions. The Chassis is designed with dual GPU and PSU layout options and 3-way stand placements (wall mount, horizontal, and vertical placements) provide users unlimited flexibility when it comes to building the most advanced customized PC.

Built for Makers

By practicing the idea of “maker movement” as well as 3D printing, Thermaltake designs the open frame panoramic viewing chassis as users can do their own mods, as well as print out their ideas, using liquid cooling components, and manuals without boundaries. Users can download 3D printing accessory files on 3D Makers Microsite, printing them out to do a special mod.

5mm Thick Tempered Glass Window

The 5 mm thick front tempered glass panel guarantees the durability of the window and display your build with crisp clarity. Users can fully display every component of the system and show off their dedication and skill set with its exceptional viewing capability.

DMD – Dismantlable Modular Design

Gamers can freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design.

3-Way Placement Layout

Designed for use in three different ways: Wall-mount, vertical, and horizontal placement. Users can hang it on the wall as decoration, take it to wherever they want and display the nice builds vertically or horizontally for the best viewing presentation while ensuring outstanding cooling performance.

Versatile GPU & PSU Orientation

Show off your graphic card and power supply with our special design bracket. Further, the Core P3 TG also has the support for vertical PSU layout when ITX motherboard is applied. Riser cable, AC-053-CN1OTN-C1, is Included.

Native AIO Support

The Core P3 SE is natively supported for all type of All-In-One liquid cooling solution without the need for extra bracket.

Supreme Hardware Support

Supports the mounting of 3.5” and 2.5” storage devices. Two 3.5”/2.5” drive trays are included and hidden in the back panel that offers 45mm of cable management space.

Advance Ventilation

Up to 3 120mm or 140mm fans or 420mm radiator at left side.

Product description

Sometimes you need to build a monster gaming rig that doesn't look like one. Instead, you need a case that offers you the flexibility that installing your top-of-the-line hardware requires, but without all the visual spectacle of the more hardcore models. The Carbide Series 100R Silent Edition Mid Tower case does exactly that. The sleek, understated design aesthetic looks like "serious business," while the sound damping side panels, adjustable cooling fans, USB 3.0 support and tool-free access door all say "serious gaming power." And it all comes at a price that states "serious value".

• Clean, modern design: A more mature, understated design that fits well into any setup
• Sound-damping side panels: Overall PC noise is reduced, resulting in a quieter rig
• 3-speed fan controller: Fans can power on overdrive when performance requires it
• Two 120mm fans included: Sleek fans give builders a head start on cooling their system
• USB 3.0 compatible: For modern connectivity. Case Material: Steel
• Easy installation and upgradability: The tool-free side door makes access to the case's interior a breeze

User questions & answers

Question:	does the hyper 212 evo fit
Answer:	Yes. I'm actually using a Hyper212 Evo in my setup. The top of the heatsink just barely clears the left side case door. There's enough clearance at the top of the case that you can install the optional top vent case fans even after both mobo and Hyper212 are installed. I would recommend installing the cooler after the mobo is installed and everything plugged in though, as the top stand off screws/fan sockets/power sockets will be kind of hard to reach if you install the cooler before indtalling the mobo in the case.
Question:	Are the hard drive bays in this computer cable of holding a ssd drive or do I have to buy a ssd bracket for this case
Answer:	The drive bays included are capable of holding an SSD or a standard Hard Drive, I have both mounted in my system.
Question:	How many fans can this case have
Answer:	I have the 100R with the clear side panel and I have 5 installed in mine with some case modding done in it. 2 in front, 2 in the top, 1 in the back.
Question:	what kind of motherboards can be used
Answer:	This will fit a standard sized ATX, Micro-ATX and Mini-ITX motherboards. Please remember that a standard size ATX motherboard is 12" x 9.6" (305 mm × 244 mm) For more information read this wikipedia article about the ATX standard: https://en.wikipedia.org/wiki/ATX#Variants Also a good reference is the Corsair 100r User Manual: https://www.corsair.com/corsairmedia/sys_master/productcontent/100R_Install_Guide.pdf And read though the case information on Corsair Site: https://www.corsair.com/us/en/Categories/Products/Cases/Carbide-Series%E2%84%A2-100R-Mid-Tower-Case/p/CC-9011075-WW#tab-overview Scroll all the way down to see motherboard compatibility.

Product features

Build a high-performance, low-noise PC that looks good anywhere

Sometimes you need to build a monster rig that doesn’t look – or sound -- like one. Instead, you need a case that offers you the flexibility that installing your top-of-the-line hardware requires, but without all the visual spectacle of the more hardcore models.

The Carbide Series 100R Silent Edition Mid Tower case does exactly that. The sleek, understated design aesthetic looks like 'serious business,' while the sound damping side panels, adjustable cooling fans, USB 3.0 support and tool-free access door all say 'serious gaming power.'

Simple, elegant, and sharp

It’s the performance PC platform in stealth mode. With a mesh-free front panel and clean, understated lines, the 100R Silent Edition is both professional enough for the office and customizable enough for any home PC build.

Keep it quiet

The side panels are insulated with noise-isolating materials to reduce noticeable fan noise. This essential if you’re building a media PC, and just plain nice if don’t want your system to contribute to environmental noise.

3-Speed fan controller

The secret to silent PC design is putting you in control. Keep the three-speed fan controller at its lowest setting for silent operation. When it’s time to push your system hard, take it up a notch or two for on-demand cooling.

Storage, simplified

The simplicity begins with tool-free 3.5” and 5.25” drive installation, and all four hard drive trays provide solid-state drive support so you can mix and match to fit your needs. On the outside, dual USB 3.0 front panel ports give you quick and easy access to the latest high-speed portable hard drives and flash drives.