13 best case coolers

• 1.120mm fan for Low-Noise operation without sacrificing performance.
• 2.C8123-5 PC RGB case fan is compatible with all types of chassis and easy to install.
• 3.Unlimited color transformation, One key to change RGB color.With 8 ultra-bright RGB LED lights, provides full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes.
• 4.The most commonly size(120mm) for computer case & radiators.C8123 is a perfect match for a RGB lighting computer system, The fan is designed to decorate your RGB systems, you can enjoy the performance with a beautiful setting.

User questions & answers

Question:	Can you purchase a replacement Fan Controller
Answer:	The short answer is that this device is not intended for that purpose. It's intended to do two things in the VHF/UHF frequency range: 1) measure the transmit power of your radio into a dummy load and 2) measure the Standing Wave Ratio (SWR) of your antenna using your radio as a frequency source. The device itself does not generate a signal - it uses your radio transmitter as a signal source. If all you're looking to do is measure continuity of your cable you can use a simple ohmmeter to do that. If you're looking to measure the impedance of your cable with connectors, google something like "measuring cable impedance" and you'll find a host of devices and techniques to do that.
Question:	Can i change fan speed with software
Answer:	The 5 watt dummy load is provided for use with the most common 5 watt radios. Very few users have 100 watt radios, so they only provide for most common use. You will need to buy your own 100 watt load, if you need one.
Question:	Will they work with msi b450 tomahawk
Answer:	Yes, it does come with a 50-ohm, 5-watt Dummy Load. The baggie is marked "Dummy Loads" but I only see one.
Question:	Does this work with nzxt software for the h500i
Answer:	NO

Product features

CAUTION:

• 1.Please power off the PC before connecting the cable to computer power supply.
• 2.Please confirm the interface firstly before connection or consult with us to confirm the interface.Please confirm carefully.
• 3.The fan not allow to mixed use of different brands of controller ,which may cause short circuit.

Specification:

• 5 xRGB LED case fan
• 1 x RGB Controller
• 1x Remote control board
• 20 x Installing Screws

Product description

The E-ATX MasterBox TD500 Mesh takes airflow performance and turns it into an art form. Powered by three pre-installed ARGB fans, airflow is fed through a geometric, three-dimensional mesh front panel into a system viewed from a crystal-clear tempered glass side panel. The Crystalline Tempered Glass side panel is precision engineered for both its toughness and its aesthetics through CNC machining. Polygonal Mesh takes its form from Cooler Masters Fine Mesh technology, simultaneously providing high airflow, dust filtration, and a strengthened structure. With advanced technology set firmly into fine art, the MasterBox TD500 Mesh Black carves its own path to the bleeding edge.

• Polygonal Mesh features a 3-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.
• A crystalline tempered glass side panel dons a crystalline design, precision engineered for strength as well as aesthetics
• Three included addressable RGB fans flood the build with lighting while providing considerable airflow.
• For enthusiast-grade cooling, 2 360 millimeter radiators are supported on the top and front panel to keep the most extreme systems cool.
• Support for up to 7 120 millimeter fans and front, top, and rear liquid cooling ensure the utmost in performance.

User questions & answers

Question:	Is the PSU bay removable
Answer:	Yes it will indicate it’s full and needs to be dumped out
Question:	Does this have dust filters on front and top pane
Answer:	I guess you could
Question:	What is the max size of cpu water/liquid cooler can this case fit in
Answer:	Yes it stops running and light blinks indicating time to empty the water bin.
Question:	Does the power supply shroud have mounts to put any intake fans to blow on the gpu
Answer:	Mine just pulls out

Product features

Cooler Master MasterBox TD500 Mesh

The MasterBox TD500 Mesh E-ATX PC chassis turns high airflow performance into an art form with a geometric, three-dimensional mesh front panel and a tempered glass side panel plausibly cut from crystal ore. Raw performance is powered by three pre-installed ARGB fans mounted in front to light up every intricate angle of its structure.

Polygonal-Mesh

Crafted from Cooler Master’s Fine Mesh technology, Polygonal Mesh features a three-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.

Crystalline Tempered Glass

A crystalline design spans the edges of the tempered glass side panel, precision-engineered for strength as well as aesthetics.

Triple ARGB Fans

Three addressable RGB fans flood the Polygonal Mesh front panel with lighting while providing considerable airflow to the system.

Versatile Cooling Options

Open Airflow design, Fine Mesh front and top panel supporting up to seven 120mm fans and 360mm radiator.

Roomy Interior

The spacious interior fits all standard ATX and Micro-ATX motherboards configuration. Support for up to a 410mm graphics card, a 165mm CPU cooler, and up to a 180mm PSU in length provides room for upgrades.

Product description

The MasterBox MB311L ARGB is a Micro-ATX airflow PC case pre-installed with two ARGB fans and made to be built with the latest gaming hardware. The front panel’s façade is made entirely of Fine Mesh, placed between two honeycomb vents on either side to maximize airflow. Since running the latest games, smoothly, means keeping the latest hardware efficiently cooled, top panel ventilation offers the option to add even more cooling hardware—if nothing is mounted, the top panel acts as passive ventilation. The internal layout was engineered for a high compatibility for the latest gaming hardware while also accounting for future upgrades. Following in the principles of the award-winning MB Series, versatility is paired with presentation to ensure that any gaming system built inside the MasterBox MB311L ARGB looks as good as it performs. I/O Panel - 2x USB 3.2 Gen 1 (formerly USB 3.0), 1x 3.5mm Audio Jack, 1x 3.5mm Mic Jack, 1x ARGB 2-to-3 splitter, 1x ARGB Controller (only for the S02 versions).

• Fine mesh front panel: Cooler Master’s Fine Mesh design on the front panel is proven to provide proficient airflow while filtering out dust.
• Mesh intakes: Large, mesh intakes span each side of the front panel to provide additional airflow to system.
• Dual ARGB fans: Dual pre-installed 120mm ARGB fans with splitter can be managed by the motherboard, to create a customized ARGB lighting system. Motherboard support - Micro ATX, Mini ITX
• Tempered glass: Hardware, custom-loop cooling, or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel.
• Adaptable drive cage: The drive cage is movable, able to shift toward the front to accommodate for PSU space, backwards to provide additional radiator space, or even completely removed.
• Versatile cooling options: Support a total of 6 120 millimeter fans, front, top and rear radiator placement to ensure no compromise on cooling performance.

User questions & answers

Question:	what does it come with in box
Answer:	HEN70ETFP
Question:	How do i control the rgb fans
Answer:	Yes
Question:	How to connect the argb fan to asus b450m-plus
Answer:	3/8th inch, inside diameter. Works well
Question:	Does it come with everything
Answer:	Yes it does come with the drain tube.

Product features

Cooler Master MasterBox MB311L ARGB

The MasterBox MB311L ARGB is a Micro-ATX airflow PC case with two ARGB fans and made to be built with the latest gaming hardware. The front panel’s façade is made entirely of Fine Mesh, placed between two honeycomb vents on either side to maximize airflow. Since running the latest games, smoothly, means keeping the latest hardware efficiently cooled, top panel ventilation offers the option to add even more cooling hardware—if nothing is mounted, the top panel acts as passive ventilation.

Mesh Front Intakes

Open Airflow design fine mesh, and a mesh intakes spanning each side of spanning the front panel.

Dual ARGB Fans

Dual 120mm ARGB fans with splitter can be managed by the motherboard, to create a customized ARGB lighting system.

Tempered Glass Side Panel

Hardware, custom-loop cooling, or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel.

Roomy Interior

The spacious interior fits all standard ITX and Micro-ATX motherboards configuration.

Optimized Airflow

Airflow is optimized by a collaboration between the front Fine Mesh and Mesh Intakes, with additional top panel ventilation, and rear exhaust.

Product description

The Master Box Q300L is your straightforward option in the lineup of the brand new Master Box Series from Cooler Master. A Series that might be small in size but excels in functionality and modularity without compromising on the thermal performance. Although the size wouldn't tell, the Master Box Q300L supports a standard ATX PSU which we don't see often in the market with this size. Based on the different system setup, the I/O panel can be adjusted to six different locations, three options at each side of the case. You can decide which setup fits your system best. Due to the cube design of the frame and special pattern design on the magnetic dust filter will make the chassis stand out from the rest. The combination of a practical design and the unique customizable outlook makes the Master Box Q300L The perfect choice for office and home.

• I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal
• Edge to edge acrylic transparent side panel offers a full view inside
• Body depth height: Can support normal size ATX power supply
• Front magnetic design dust filter with open perforated front, top and bottom for high air performance
• Extra space behind the motherboard tray for hidden cable management

User questions & answers

Question:	Will the asus geforce gtx 1060 3gb dual-fan oc fit in this case
Answer:	According to the Asus website, the dimensions for that card are 24.2 x 13 x4.3 Centimeter I'm currently using a Zotac 1060 6GB AMP! Edition, whose dimensions are 210mm x 121.8mm x 37mm The ASUS card is about an Inch longer, but there is WAY more than enough room in the case to fit the ASUS card.
Question:	can it fit a normal ATX power supply
Answer:	Absolutely will fit any ATX power supply. I'm using thermaltake smart series 500w rgb.
Question:	I've seen photos of the handle (from a Q300P) being attached to the center of the top panel of this case. Is this possible
Answer:	You can remove the plastic bit that has the cooler master logo on it and install handles on the case like the Q300P
Question:	Is this case wide enough to support a cooler master hyper 212 evo
Answer:	I know what the official CM specs are, but I think it will fit. This guy installed a taller cooler with its cover and it fit. https://www.vortez.net/articles_pages/cooler_master_masterbox_q300l_review,8.html

Product features

MasterBox Q300L

The MasterBox Q300L is your straightforward option in the MasterBox Q-series from Cooler Master, a series that might be small in size but excels in functionality, modularity, and thermal performance. The combination of a practical design and the unique customizable aesthetic makes the Q300L the perfect choice for office and home use.

System Flexibility

6-orientation I/O panel—both sides: front, top, and bottom.

Edge-to-Edge Acrylic Side Panel

Show off your build through the full-size transparent side panel.

Clean Routing Space

28 mm of open space for hidden cable management.

Small Form Factor, ATX PSU Support

Despite the Micro-ATX form factor and the body depth/height of only 370 x 370 mm, the Q300L can accommodate a normal ATX PSU.

• Multiple Modes: RF Wireless Remote Controller, One Key to Adjust Color Speed, Color Mode, Color and Fan Speed
• Features: ARGB DS Hub Box can max Sync up 9pcs PC Fans and 2pcs LED strip
• Easy Install: 120MM Fan tuned for High-Airflow and Large Volume Cooling
• Hight Quality: 6Pin interface to provides RGB Fan safe and reliable power output,Make the lights appear bright and colorful
• The LEDdess PC Lighting Kit Unique Halo Arc-shaped Frame Shows Horgeous and Vivid Visual Effect

User questions & answers

Question:	Is there a 140mm & 200mm rgb fan from this brand??? will other brand rgb fans plug into & work (be compatible) with the controller
Answer:	Unsure of the amperage but It plugs into a 115V outlet.
Question:	Is their a static white color option
Answer:	Pretty quiet
Question:	Do the fans always pulse or can you make them stay a constant color? Also, how does the controller work
Answer:	I think so
Question:	Is this one working on z370 evga motherboard
Answer:	According to the shipping box, it's made in China

Product features

DS the RGB Fan to light up your systems

LEDdess PC Fan can not only provide beautiful lighting effects, but also offer superior silent performance. The series comes with DS RGB control box that can support up to 9 x RGB fans and 2 x RGB LED devices. Furthermore, users can use the included 3-in-1 remote control to easily select preferred RGB lighting effects, colors and fan speed; no software or APP is required.

ARGB Rainbow Fan

Fan Size: 12x12x2.5 CM / 4.7x4.7x1 Inch(LxWxH)

Connector: 6Pin

Advance Ari Flow: 38CFM

Fan speed RPM: 700-1500 RPM

Bearing Type: Hydro Bearing

ARGB Rainbow LED Strip

Strip Length: 32 Inches(with 20 Inches Cable) / 80CM(with 50 CM Cable)

Number of LED Lights: 15 LEDs

LED Type: 5050 LED

Rated Voltage: DC 5V

Magnet: Black Sintered NdFeB Permanent Magnets

4th Gen DS Hub Box Controller Kit

300+ Mode Changes

Adjustable Fan Speed

Adjustable Color Brightness

Adjustable Color Change Speed

DS Hub Box

FAN1…9 to DS Fans (6PIN)

LED1,LED2 to DS LED Strip (4PIN)

Power to SATA Power Cable (6PIN)

Air Flow

DS label side is intake air

Silent design with four corners pads

Speed 700-1500 RPM

Remote

If you need to keep rainbow mode, please press the purple button for more than 3 seconds

Auto key can auto change 300+ mode

Fan speed have 4 step (Stop, 40%, 70%, 100%)

Specification

* 120MM fan tuned for high-airflow and large volume cooling

* Colorful LED light design

* Provides improved performance over standard case fans

* Ultra-thin fan blades ensure less vibration, noise and turbulence

* Easy to change the color mode, effect speed and fan speed via the controller

* High-speed rotation to bring excellent cooling effect to the chassis at the same time different colors

• 1.Innovative design, Five color on one fan. make your pc colorful !
• 2.HIGH EFFICIENCY, MUTE-Combination of high efficiency heat dissipation and mute,11 pcs bionic shark fin fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, Corner breakage design of the fan vanes is to reduce the noise and increase wind pressure. In addition, the fan vanes have been polished, not easy to stick ash.
• 3.STANDARD 12CM SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects.
• 4.ASEISMATIC DESIGN-Silent noise reduction,That 8 damping silicone pads fixed on both sides of the fan frame is to reduce the noise of the polarization motor vibration.
• 5. upHere：Specializing in designing and manufacturing case fan PC cooler and sleeved cable etc for computer accessory

User questions & answers

Question:	Do the lights still work even without the hub and remote
Answer:	Thanks for your question, there is not a pump for draining when full. You can choose to manually emptying OR you can choose to use the drain hose. Please feel free to contact us at [email protected] if you have any futher questions.
Question:	can these be combined with another version of uphere fans that has a remote control
Answer:	I’m not sure exactly what your saying but if you mean... but putting your finger on mode only scrolls the left side... standard-sleep. If all that goes on and off is anion and you can’t adjust what mode you want it to be running on. I’d call the manufacturer. * Don’t press and hold mode . Just let it detect the heat of your finger. Good luck
Question:	Are these fan gigabyte fusion compatible
Answer:	Sleep mode = 50% and is low speed and quiet. Raining RH = 45% Drying is continuous on Standard is the RH you select
Question:	Please get back to me gow we gonna fix this issue
Answer:	I'm not sure, But it works great for my 1700 sq ft basement. I do know it's got more capabilities.

Product features

Magical Rainbow LED Ilumination

• Dual Static Rainbow LED ring maintain color and brightness uniformity. The lighting effect is visible from all directions and adds aesthetics to the chassis.

High Quality Bearing

• Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.
• Long life sleeve bearing for longer life expectancy.

Superior Cooling Performance

• Balanced airflow and air pressure designed for perfect compatbility with your case or cooler.
• Provides improved performance over standard case fans.
• Strong air flow to fortify cooling efficiency.

Product specification：

• Speed:1100RPM+/-10%
• Air Flow:53.02CFM
• Air Pressure:1.21mm-H20
• Noise Level:26.4dB(A)
• Input Power: 3.3W
• Rated Voltage: DC12V
• Input Current: 0.28A
• Life Time: 40000Hrs
• Cable length: 40cm / 15.7in

Product description

Two front panels, two 200mm ARGB fans, and a handle to grip onto when the adrenaline kicks in. The MasterCase H500 is established as the go-to ATX PC chassis for high performance airflow. Now, with 200mm ARGB fans, its legacy is upgraded with premium lighting. Each choice of front panels decide whether the build will excel at ruthless airflow performance or head-turning aesthetics. Of course, the mesh is the ideal choice for providing the pre-installed fans with high volumes of fresh air. The transparent panel, on the other hand, parades those fans in crystal clear view. With the included accessories, substantial ventilation, and iconic H-Series design elements, the MasterCase H500 retains all of the advantages of the original while adding ARGB fans for good measure.

• Mesh and transparent front panel – Both the mesh and transparent front panel are included for maximized airflow and offering a crystal-clear view of the fans
• Dual 200 millimeter ARGB fans – The iconic, addressable RGB fans are the core of the H-series in design and function, capable of operating quietly while moving high volumes of air due to their size
• ARGB lighting system – The pre-installed ARGB fans can be managed by either the motherboard or an included controller, connected by the included splitter, to create a comprehensive ARGB lighting system
• Tempered glass side panel – Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in panoramic view through an edge-to-edge tempered glass side panel
• Optimized airflow – Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades

User questions & answers

Question:	Does the power button click when you push it regardless of power
Answer:	HE Smart on iPhone
Question:	can you turn the fan lights off
Answer:	Top
Question:	Is there place for a top fan
Answer:	I had to get my own drain custom fitted. I don't feel this unit does a very good job. I would not buy again, or recommend. I called to get things addressed and they didn't act like they knew what unit I had.
Question:	How loud are the 200mm front fans
Answer:	The label on the dehumidifier says “Made in China.”

Product features

MasterCase H500 ARGB

Both the mesh front panel and transparent panel are included with the MasterCase H500 ARGB to offer a choice between maximum airflow and aesthetics. Each of the front panel options compliment the industrial design of the MasterCase H500 ARGB in their own method.

Two 200mm ARGB fans come pre-installed with an included ARGB controller And splitter. The lighting system can also be controlled by the reset switch to cycle through color and mode.

Mesh & Transparent Front Panel

Both the transparent and mesh front panels are included for maximized airflow and offering a crystal-clear view of the fans.

Dual 200mm ARGB Fans

The iconic 200mm ARGB fans capable of operating quietly while moving high volumes of air due to their size.

Optimized Airflow

Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades.

ARGB Lighting System

The pre-installed ARGB fans can be managed by either the motherboard or the included controller and splitter, to create a comprehensive

ARGB lighting system.

Tempered Glass Side Panel

Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in a panoramic view through an edge-to-edge tempered glass side panel.

Hidden Handle

A built-in handle is implemented on the top panel for easier transport to gaming events or for LAN parties.

Product description

The Master Box NR600 applies optimal cooling and expandability to a minimalist, subtle design. With thermal capability at the forefront of features, the front panel and top panel are designed to signify airflow performance in its purest form.

• Minimalistic mesh design - Elegant design elements are applied to mesh for optimal thermal performance.
• Optimal thermal performance – the full mesh front panel and ventilated top panel provide a high potential for thermal performance.
• Flush Tempered glass Side panel design – The tempered glass Side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.
• Graphics Card support up to 410 millimeter – Generous clearance space is provided to support the latest graphics cards.
• With/without ODD support – depending on preference, an odd version of the chassis is available. If an odd is not preferred, a cleaner appearance and more cooling options on the top and front panels are supported.
• Headset jack – the single 4 pole headset jack features both Audio and microphone capabilities simultaneously so that separate jacks are not needed.
• Cable management – high quality, longer length rubber grommets and generous clearance behind the motherboard offers ample room for cable management.

User questions & answers

Question:	Does this case have a removeable psu shroud
Answer:	We advise only using the remote that comes with this fan.
Question:	will a mini-itx motherboard fit this case
Answer:	This ceiling fan is damp location rated only and not wet location rated.
Question:	Will this fit noctua nh-d15 cpu cooler fan and have enough clearance
Answer:	120V
Question:	Triple fans included
Answer:	The manufacturer recommends using a 24" downrod for a 12 foot ceiling.

Product features

MasterBox NR600

The MasterBox NR600 applies optimal cooling and expandability to a minimalistic design. With thermal capability at the forefront of features, the front panel and top panel are designed to signify airflow performance in its purest form.

Functionality is blended to a compact design by maximizing use of internal space and implementing subtle design elements. The MasterBox NR600 features a tempered glass side panel, fastened by thumbscrews on the rear panel, to keep the surface immaculately flush.

Flush Tempered Glass Side Panel Design

The tempered glass side panel, fastened by thumbscrews on the rear panel, keeps the surface flush and unobstructed.

Optimal Thermal Performance

The full mesh front panel and ventilated top panel provide a high potential for thermal performance.

Fan and Radiator Support

Support for the following fan/radiator form factors: FRONT 120/140/240/280/360 mm radiator, 120 mm x 3 fans, 140 mm x 2 fans, TOP 120/240 mm radiator, 120/140 mm x 2 fans, REAR 120 mm radiator, 120 mm x 1 fan.

Dual Audio-Microphone Headphone Jack

The single 4 pole headset jack features both audio and microphone capabilities simultaneously so that separate jacks are not needed.

Drive Bay Support

Supports 4 x 3.5" HDDs and 5 x 2.5" SSDs.

Component Clearances

Supports GPUs under 410 mm, CPU coolers under 166 mm, and PSUs under 180 mm.

Product description

MasterFan MF120 Halo, a new series to the MasterFan family, providing air cooling solution for CPU liquid radiator and chassis in-take.

With its Duo-Ring Addressable RGB Lighting sporting 24 Individually Controlled ARGB LEDs for the most stunning visual effect on any gaming rig.

MF120 Halo are fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a perfect blend to cool your entire system and its components in silence.

Hybrid Fan Blade Design combing an Air Balance with a Wave Shape fan blade design for a Static Pressure airflow to tackle heightened impedance and resistance in CPU liquid radiator, low-noise or mesh chassis ventilation, while boosting overall airflow.

Specification:

Dimensions(L x H x W):120 x120 x 25mm(4.7 x 4.7 x 1 inch)

Profiles:Addressable RGB

Speed:650-1800 RPM

Air Flow:47.2 CFM

Air Pressure:1.6 mmH2O

MTTF:160,000 hours

Noise Level:6-30 dBA

Bearing :Rifle

Connector:4-Pin PWM(4pin with 3rd pin blocked)

Rated Voltage:12 VDC

Rated Current:0.25A

Safety Current:0.37A

Power Consumption:3W

Weight:180g(0.4lbs)

Package included:

1 X Masterfan MF120 HALO FAN

1 X 4-Pin PWM Cable (4pin with 3rd pin blocked)

1 X English manual

• Silent Cooling Technology: Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution.PWM Fan Control: Dynamic speed adjustment between 650 rpm to 1,800 rpm, minimizing noise or maximizing airflow
• Duo-Ring Addressable RGB Lighting: 24 Individually Controlled ARGB LEDs for a stunning visual effect.Performance Engineered: Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow
• Certified Compatibility: Compatible with most of Addressable RGB capable motherboards Aura, Mystic Light and Polychome Sync.
• NOTE: The Addressable RGB Light function MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller( NOT included) .It will NOT work with 4-pin RGB or Standard RGB+12V. The ARGB connection header of this case fan is 4-position-3-pin, a 3-position-3-pin ARGB header adapter may need for some Gigabyte motherboard. Please check the ARGB motherboard of your motherboard before purchase!
• NOTE for Gigabyte Motherboard Owner: A Gigabyte Adapter Cable may be required to connect "MF120 Halo ARGB" to some models of Gigabyte RGB Fusion Addressable RGB capable motherboard with 3-position-3-pin ARGB Header. "Gigabyte Adapter Cable" or "Addressable RGB LED Small Controller" are SOLD SEPARATELY!

User questions & answers

Question:	Does it come with separate 3pin cable compatible with asus rog strix x570 addressable aura sync input for rgb
Answer:	No assembly required if used with 1 lb tanks
Question:	How many mf120 fans can be used on one fan header
Answer:	The Mr. Heater MH18B goes from 4,000 - 18,000 BTU depending on what setting you have it on. GlobalTowne is an authorized Mr. Heater distributor.
Question:	Are these fans compatible with the b450 tomohawk Max motherboard
Answer:	We bought two of the Big Buddy heaters early this year. Bought one, very pleased and wanted another both as a backup and to lend to family if needed. These heaters were hard to find at a reasonable price back in January and February when it was really cold out. Sellers wanted at least $180, many over $200. The first Big Buddy we bought in February was not CA/MA approved. Paid a little more in April for the second heater (Canada & Mass approved) and had to wait until July for delivery. Upon arrival we found that the CA/MA approved heater was no different than the non approved version except for the packaging - one box stated "indoor/outdoor" heater and the other stated "outdoor heater". The Massachusetts manual stated "outdoor use only" while the other did not. Aside from the packaging, there is no difference between the two versions whatsoever. It appears that Massachusetts simply has more stringent safety codes than the other States.
Question:	Regarding the mf120 halo, how many amps are the rgb leds? in the photos, the backside of the fan says 0.55a, but specs on coolermaster site say 1.40a
Answer:	From others that have owned this unit, I have found that the batteries will last 4-6 hrs. Best to use those only in an emergency and use that AC adapter when possible.

Product description

"The Master Box MB600L is designed to blend into its environment. Its sleek design makes it the best choice for office or home usage and the brushed front panel and red side trim gives the case an elegant outlook. The edge to edge transparent acrylic side panel provides easy access and a clear view to internal build components. The inside of the case has a full black coating and PSU cover, which will help to facilitate a clean build with easy cable management. ". Cable Routing - Behind Motherboard Tray 0.59-0.90 inches.

• Sleek Design w/Red Side Trim and Acrylic Side Panel
• Supports 4 x 120mm Fans 1x Pre-Installed in the Back
• Support up to 360mm Radiator
• Support up to 400mm GPU/VGA Card
• Full black coating and PSU cover

User questions & answers

Question:	Does this fit a atx motherboard? Very stupid question but does it
Answer:	The shroud cannot come off
Question:	You also get a cable splitter for the rgb fans. Where do i connect the splitter? To the fan header? i dont have an rgb one, so i will buy the controll
Answer:	It has a magnetic filter on the top and a slotted folter on the bottom, The mesh in the front is such that a filter is unnecessary.
Question:	Does this support atx motherboard
Answer:	It fits a 360mm up top. Tight, but fits. A giant CPU cooler or real tall, odd-shaped RAM (like Warhawk or Super Luce) will have interference. I lost rear exhaust fan doing it. A thinner one or smaller than a 120mm would work, but for what i had at the house, I didn't have one to fit with a 360mm up top.
Question:	What comes in the box with the masterbox
Answer:	No it does not, the fans on the front of the case supply airflow to the psu area as well as the video card heatsink area and is more than adequate, The shroud does however have mounting for 2 ssd's and great cable management for them.

Product features

MasterBox MB600L

The MasterBox MB600L with its sleek design, brushed front panel and red side trim gives the case an elegant outlook. The edge to edge transparent acrylic side panel provides easy access and a clear view to internal build components. A full black coating and PSU cover, for a clean build with easy cable management.

Product description

The N400 is one of two computer cases joining the N200 in Cooler Master's new N-Series. Along with its brothers, the N400 has numerous features that help it stand apart from the competition. It does so with a full array of exciting options that have been designed specifically with cooling performance in mind, especially water cooling. Its full mesh front panel and well-ventilated layout provide for a more abundant flow of air throughout the case. Fully embracing water cooling, N400 supports radiators up to 240 mm.

• Fully meshed front panel for superior airflow
• Supports a 240 mm water cooling radiator or two 120 mm fans on the right side or top of case
• Supports up to three SSDs -two on the tool-less 2.5 Inch bracket and one at the bottom of the HDD cage
• Supports a 120 mm water cooling radiator at the rear
• Includes two Cooler Master XtraFlo 120 mm fans (non-LED) arranged for optimum airflow with support for up to 8 fans total
• Three dust filters (top, right side panel, and power supply) for easy maintenance
• Two USB 3.0 SuperSpeed ports in front

User questions & answers

Question:	Does a corsair h100 v2 fit in the right side fan mount? (cooler master n400 case
Answer:	It also comes with the screws for mounting the motherboard.
Question:	Are the installed xtraflo fans pwm? 3 pins or
Answer:	You should be able to control the fans either with the motherboards lighting software or you can simply connect them to the ARGB controller that comes in the cases. Just google it there’s a ton of info on this case. Hopefully this helped
Question:	Can it fit a evga geforce gtx 750ti sc 2gb gddr5 gpu
Answer:	You would not be able to wire it to a motherboard that does not have an ARGB header. You would have to use the manual controller that is included with the MB311L ARGB case. CM-PNguyen
Question:	Will the N400 support a standard ATX motherboard comfortably
Answer:	it comes with the case, Temper glass panel, 3 RGB fans and 3-n-1 RGB splitter.

Product features

N400

The new Cooler Master N400 is a mid-tower designed for optimum cooling and expandability. The front panel and I/O area feature the premium mesh for a modern look. It supports up to 8 fans, including two pre-installed XtraFlo fans for extreme high airflow. If you prefer liquid cooling solutions, installing 240mm or 120mm radiators in N400 won't be a problem as well - the 240mm radiator can be installed at the top or on the right side, and the 120mm one - in the rear. N400 also provides plenty of expansion by support of up to 3 SSDs and high-end graphics cards up to 320mm / 12.6 inch.

Product description

SickleFlow 120 ARGB 3in1 is our signature cooling performance with a rejuvenated ARGB design to the Cooler Master Fan family, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. Optimized blade design with updated curve that improves air flow and air pressure. Enhanced frame structure, reducing turbulent flow and noise and increasing overall work efficiency. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

• ARGB Lighting: Signature cooling performance with an ARGB design: a perfect choice for all of the users wanting lighting effects that are individually customizable.
• New Blade Design: Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.
• Enhanced Fan Frame: Enhanced frame structure, reducing turbulent flow noise increase efficiency.
• Sealed Bearing Structure: Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

User questions & answers

Question:	So how do these all connect? Does it have an rgb hub or are they all daisy chained? What do I need to buy extra to make them work
Answer:	I sorry for we have not 140mm, but the 140mm fan will have sample in May fans connector is 6PIN, the strip connector is 4pin, please know than
Question:	My motherboard does not support RGB and would like to know what controller would be recommended from the manufacturer
Answer:	yes
Question:	Will they fit the cooler master Q300L
Answer:	They pulse, they can stay constant, they can do all sorts of stuff with the colors i really enjoy them. I have bought multiple packs of them for people's builds, they look & work great.
Question:	Anyone have issue with leds? mine are not working. at all
Answer:	The quick answer is yes with most motherboards. It took a bit to get this working with everything (I have the z470) but basically you are connecting these into the hub that comes with this, and connecting that to your power supply/ pc. The RGBs have the 6 pin thing going on but the hub has the 4 pin and you can pretty much find connection pieces or hub that work with almost any motherboard, but yes definitely yours. My quick review is the one entitled "this can work several ways..." and you can see the MB in the back and in the video.

Product features

SickleFlow 120 V2 ARGB 3n1

SickleFlow 120 V2 ARGB, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

Sealed Bearing Structure

Two-tier sealing mechanism, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

Product description

The COSMOS C700P Black Edition extends further than its matte black coating, comprised of internal and external improvements upon the original. The PSU Shroud, flat radiator brackets, fine mesh panels, cable cover system, and an extra rear panel are all included to advance the COSMOS’ modular origins. While the panels and bars exhibit a pitch-black theme, the curved tempered glass possesses a lighter tint in comparison to the original. Builds enjoy a panoramic view through the dual-curved tempered glass, utilizing an arsenal of accessories at hand. Raising the Bar(s) in the COSMOS C700P Black Edition means more out-of-the-box parts to build an out-of-this-world rig.

• COSMOS C700P Black Edition – Advancements upon the original COSMOS C700P include the PSU Shroud, flat radiator brackets, fine mesh panels, cable cover system, and an extra rear panel—all housed in a matte black C700P.
• Highly versatile layout – the unique frame design supports a conventional, Chimney, inverse layout, or a fully customized layout. The motherboard tray is also removable for installation outside of the chassis.
• Extensive cable cover system – The 3 included covers can be placed on either the M. Port or on the mid-plate, with the ability to mount SSD storage or a reservoir.
• Diverse Liquid Cooling support – a flat radiator bracket design offers more versatility for liquid cooling with the ability to be mounted on the top, front, or bottom of the frame. The two included brackets can each support a 420mm radiator.
• Curved tempered glass Side panel – a lightly-tinted Tempered glass Side panel, with two curved edges, offer a wide view of the system Build.

User questions & answers

Question:	Hi everyone, does anyone know the internal dimensions of the case from left to right
Answer:	Yes. The Unicorn (rainbow color) version of these fans do light up without a hub or remote. Just plug them in with the 4 or 3 pin connector and they light up. I wrote a review with a picture that shows how bright these are. And I only connected them to my power supply 4 pin and 3 pin connectors. Nothing else.
Question:	Does this support a vertical GPU
Answer:	So The connectors are important here. You want to makes sure the hub for the main fans uses the same pin connectors. Now though they should work just fine. The remote you have may not fully support the lighting changes available to these fans. But really. It won't be something you will actually notice.
Question:	Just got case. Can’t get fan or lights to turn on. Anyone know how to get it to work
Answer:	Dear customer, thank you for your inquiry. This model of fan has only a fixed lighting effect, can be connected to the Gigabyte motherboard, but can not achieve any RGB function.
Question:	Is anyone experiencing issues mounting the HD audio cable on the mobo with this case
Answer:	No.

Product features

Curved Tempered Glass Side Panel

A lightly-tinted tempered glass side panel, with two curved edges, offer a wide view of the system build.

Flat Radiator Brackets

Flat radiator brackets offer an easier maintenance, mounting, and removal process for liquid cooling with more clearance for push-pull configurations.

Alternate Rear Panel

To support exotic layouts with motherboards or graphics cards oriented vertically, an alternate panel with rubber grommets is included to allow a pass-through for external cables.

Highly Versatile Layout

The unique frame design supports a conventional, chimney, inverse layout, or a fully customized layout. The motherboard tray is also removable for installation outside of the chassis.

Extensive Cable Cover System

The 3 included covers can be placed on either the M. Port or on the mid-plate, with the ability to mount SSD storage or a reservoir.

Rich Connectivity

The advanced I/O panel features a USB 3.1 (Gen 2) Type-C port, four additional USB 3.0 ports, a fan speed control button and an RGB control button.

Motherboard Support

Mini-ITX

Micro-ATX

ATX

E-ATX*

*E-ATX up to 12” x 10.7” may impact cable management options

Storage Support

5.25" ODD x 1

3.5" / 2.5" COMBO x 4

2.5" SSD x 4

Fan Support

Top: 120/140mm fan x 3

Front: 120/140mm fan x 3

Rear: 120/140mm fan x 1

Bottom: 120/140mm fan x 2 (bracket needed)

Radiator Support

Top: 120mm, 140mm, 240mm, 280mm, 360mm (remove ODD)

Front: 120mm, 140mm 240mm, 280mm, 360mm, 420mm (remove ODD)

Rear: 120mm, 140mm

Bottom: 120mm, 140mm, 240mm