12 best vga splitters
VGA splitters are devices used in the realm of computer accessories and electronics to split a single VGA (Video Graphics Array) signal into multiple outputs. These devices are commonly employed in various scenarios where you need to display the same video content on multiple monitors or screens simultaneously. Here's what you need to know about VGA splitters:
Purpose: VGA splitters are primarily used to duplicate the video output from a single source (e.g., a computer, laptop, or video player) to multiple display devices (e.g., monitors, projectors, or screens). This is useful in settings such as presentations, classrooms, trade shows, and home entertainment systems.
Functionality: VGA splitters take the VGA signal input from a source device and distribute it to multiple VGA outputs. They can typically split the signal into two, four, or more outputs, depending on the model.
Compatibility: VGA splitters are compatible with VGA cables and connectors.However, it's important to ensure that the splitter and cables match the resolution and refresh rate requirements of your displays to ensure optimal video quality.
Resolution: The resolution supported by VGA splitters can vary. Some basic models support lower resolutions, while more advanced ones can handle higher resolutions, including HD (High Definition) and Full HD.
Power: Some VGA splitters require an external power source, while others can operate without external power. Powered splitters are often recommended for longer cable runs or when splitting the signal to multiple displays.
Types: There are different types of VGA splitters available, including simple cable splitters and more sophisticated active splitters with built-in signal amplification. Active splitters are typically used when longer cable runs are needed or when the signal needs to be boosted for multiple displays.
Signal Quality: The quality of the video signal can be affected when using VGA splitters, especially if the cable lengths are extensive or if passive splitters are used without signal amplification. Active splitters help maintain signal quality over longer distances.
Set-Up: Setting up a VGA splitter is usually straightforward. You connect the VGA input from your source device to the splitter, and then connect the VGA outputs to the displays. In some cases, you may also need to connect external power if the splitter requires it.
Use Cases: VGA splitters are commonly used in business environments for presentations, trade shows, and training sessions. They are also used in home entertainment systems when multiple screens need to display the same content, such as in a home theater setup.
Alternatives: With advancements in display technology, VGA is becoming less common, and many modern devices use digital connections like HDMI or DisplayPort. In such cases, you may need adapters or converters to connect VGA sources to displays with different input ports.
In summary, VGA splitters are handy devices for duplicating VGA video signals to multiple displays. They come in various types and configurations to suit different needs, making them useful in both professional and home settings where VGA connections are still in use.
Below you can find our editor's choice of the best vga splitters on the market- VGA dual monitor adapter sends an identical VGA signal to two separate VGA displays; Reliably transmits an identical signal to two separate monitors; VGA cables (sold separately) are required
- Duplicator VGA splitter dual monitor has a male connector that plugs directly into a computer; Two female VGA sockets on the VGA splitter cord connect to the VGA cables of two separate displays
- Video resolution support for 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), and 1080p for high resolution LCD and LED monitors; Audio must be transmitted separately
- Sturdy construction of the monitor splitter adapter supports the weight of 2 VGA cables; Engineered for frequent use and long life and backed by a lifetime warranty
- Universal VGA compatibility with computers and displays; Also known as RGB, DB-15, DE-15, HD-15, HDB-15 or D-sub 15
User questions & answers
Question: | how can i connect to laptops to gether and be able to use both screen to move things back and fourth? what cable would i need |
Answer: | You will need a good 2 or 4 port KVM switch to to toggle between 2 computers and 1 screen. This works for desktops but i'm not sure about laptops. Go on line to check the switches and they show different configurations. Hope this helped. |
Question: | when i plug into a monitor AND a projector, the monitor "loses" signal...what gives? it seems to be able to only "handle" one screen at a time |
Answer: | I never had a similar problem. I wonder if you are running at a resolution that isn't supported by one device on the other?Maybe plug the monitor in first, have it on, and then add the projector. |
Question: | What kind of VGA splitter do I need to connect a PC and a laptop to A SINGLE monitor at different times? I don't want to keep switching the VGA cable |
Answer: | http://www.amazon.com/Round-Press-Button-Switch-Splitter/dp/B0053WXOMQ/ref=sr_1_5?s=electronics&ie=UTF8&qid=1390172553&sr=1-5&keywords=vga+monitor+switch+box |
Question: | Can this show separate displays |
Answer: | This kind of splitter will just duplicate the signal that it receives and then send the same picture to two displays, and won't help you extend your desktop spreading it out over multiple screens. It won't let you send two different pictures from one VGA port on your computer. This splitter cable will only help you in duplicating one signal that was sent out.It is useful for if you want to send a picture to both a monitor and a projector, or to two monitors on your desk, with one facing you and one facing a visitor... that sort of thing.However, if you're using a laptop which has both a built-in screen and a VGA port, the picture you send out through the VGA port doesn't have to be the same as what's on your laptop screen. This is a feature of the laptop itself. You can do the same on a desktop computer which has support for multiple video outputs. |
Product features
Mirrored Displays (Duplicated Content On Both Displays)
The Cable Matters VGA Monitor Y-Splitter Cable is a great solution for duplicating images from a computer to two identical screens. Applications include security monitors, conference room presentations, or video in a house of worship.
Important Notes
- Connecting a long VGA cable may degrade the video appearance
- Passive cable only duplicates (does not extend) the PC screen to a monitor
- VGA MIRROR CABLE sends an identical VGA signal to two separate VGA displays; Reliably transmits an identical signal to two separate monitors; VGA cables (sold separately) are required. Please pay attenion, the image on the two VGA monitor will be identical.
- DUPLICATOR VGA Y-SPLITTER CABLE has a male connector that plugs directly into a computer; Two female VGA sockets on the cable connect to the VGA cables of two separate displays
- VIDEO RESOLUTION SUPPORT for 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), and 1080p for high resolution LCD and LED monitors; Audio must be transmitted separately
- STURDY CONSTRUCTION of VGA mirroring cable supports the weight of 2 VGA cables; Engineered for frequent use and long life and backed by a lifetime warranty
- UNIVERSAL VGA COMPATIBILITY with computers and displays; Also known as RGB, DB-15, DE-15, HD-15, HDB-15 or D-sub 15
User questions & answers
Question: | Can I use this for 2 inputs on one monitor |
Answer: | No. One video card output to two monitors only. what you want for your application is a VGA switch |
Question: | Will this work ok if my 2 monitors are different resolutions |
Answer: | It did not work for me. Both monitors were capable of high resolution, but when I plugged in the splitter, the computer would only send 640 X 480. It could not recognize the monitors through the splitter and it defaulted to the lowest resolution. Neither monitor had an acceptable image. |
Question: | Can I use it to work on 2 monitors moving stuff from one to the other |
Answer: | Nope... this splits one signal to two monitors. Both with show the same thing. You need a video card that supports two monitors in order to split your displays. |
Question: | It says there is mirror mode AND extend mode, so why everyone only say it can only duplicate same screen and not extend |
Answer: | False advertising of the product I suspect. It only duplicates the output of the computer (desktop/laptop) to the monitors input. You will require a multi-port docking station to obtain extend mode. |
Product features
Wide Compatibility with 2 Large View
- Compatible with Flat Panel Displays, Digital CRT Displays, Projectors, and HDTV
- Mirror or Extend identical image on two external monitor, convenient solution for your desktop or laptop to the large view
UP to High Definition Resolution
- VGA to VGA cable supports resolution up to1920*1200 @ 60Hz and 1080P (Full HD).
- Supports digital signal only, and VGA does not support audio output
Advanced Conductor Selection
- Gold-plated connectors resist corrosion, provide rigidity, and improve the signal performance
EMI & RFI
- Integrated dual fritter cores on the VGA wire minimize cross talk, suppress noise, and protect against electromagnetic interference (EMI) and radio frequency interference (RFI)
Enhanced Durability
- Environmental PVC Jacket to ensure cable more soft and flexible
- Made of Oxygen Free Copper, 30AWG
Product description
Supports 1920x1440 High Resolution
Supports resolution up to 1920x1440 @60Hz, backward compatible with 1080P, 1600x1200, 1680x1050, 1066x900, 1440x1050, 1440x900, 1366x768, 1360x768, 1280x1024, 1280x960, 1280x800, 1280x768, 1280x720, 1152x870, 1152x864, 1024x768, 1024x600, 848x480, 832x624, 800x600, 800x480, 768x576, 720x576, 720x480, 720x400, 640x480.
82ft Long-Distance Transmission
The VGA splitter with built-in signal strengthen module which could strengthen analog signal; moreover, it utilizes 26AWG 3+6 VGA wire, all of them make 82ft distance transmission become available.
Universal Compatibility
Compatible with all VGA computers and displays, such as VGA laptop, PC, set-top box, blue-ray, etc.; and VGA monitor, display, TV, projector and so on. No need to worry about compatibility issue any more.
External Power Needed for Special Devices Equipped with Micro USB port that designed for some special VGA devices that may require external power. Some devices may not require external power source. (Micro USB cable not included).
Plug and Play
Driver free, no any program needed, saving time on installing complicated driver or program.
Specification
Input: 1 x VGA 15-PIN Male;
Output: 2 x VGA 15-PIN Female;
Bandwidth: 250Mhz;
Resolution: 1920x1440@60Hz;
Wire Gauge: 26AWG;
Highest Transmission Distance: 82ft / 25 meter;
Cable length: 3ft;
**Note**
1.It could only convert signal from one source device(Laptops/Computers) to two target displays/monitors/HDTVs.
2.It could only duplicate the laptop/computer screen to displays/monitors/HDTVs, but NOT extend.
3.The mirco usb port can be used for extra power supply when you're using the large power consumption device.
Package
UGREEN 20918 VGA Monitor Y Splitter x 1
- Mirror Mode Screen Duplication: Mirror Mode only, this product does not support Extend Mode. It can only transfer signal from one source device (Laptop or Computer) to two displays or monitors or HDTVs. No power cord included in the box, and you could use any standard Micro USB cable for extra power supply.
- How it Works: This VGA splitter enables you to connect a VGA input device(laptop, PC, set-top box, blue-ray, etc.) to two VGA output display screen devices. And it only can deliver the same image. (TVs, displays, projectors, etc.) , supports 82ft long-distance transmission. (Note: VGA do not support audio)
- Supports resolution up to 1920x1440 @60Hz, compatible with lower resolution, such as 1080P, 1600x1200, 1680x1050, 1066x900, etc. Supports VGA, SVGA, XVGA, UXGA. Bandwidth up to 250Mhz.
- Intelligently Identify Resolution: VGA OUT 1 supports DDC, your computer will identify resolution of monitor and adjust to a suitable value which provides you an excellent visual experience. Note: VGA OUT 2 does not have this function.
- Durable Construcion: thick nickel-plated connector withstands frenquently plugging and unplugging and anti-corrosion; ABS case has a great heat resistance during working status.
User questions & answers
Question: | Can you move pages between the two monitors with this splitter |
Answer: | No. The splitter simply duplicates the video coming out of your PC or other device and drives two independent monitors. It is not much more sophisticated than that, however, note: The splitter communicates with the monitor connected to the VGA OUT 1 connector to determine this monitor's capabilities. The splitter duplicates the video sent out on VGA OUT 1, on VGA OUT 2. https://www.ugreen.com/product/1411-en.html |
Question: | does this combine 2 screens into one? or does it treat it like theirs 2 screens an 2 towers? if that makes sense |
Answer: | The splitter takes one output and converts it into two outputs. Both the new outputs show the same image. One common use of the splitter is so that you can sit at your computer and see and control a presentation while at the same time an audience can see your presentation on a large screen TV.The splitter does not combine two different outputs, from two computers for example, into one. The splitter does not take your computer output and split it on half, so you can see each half on a different display. |
Question: | What is mirror mode only |
Answer: | I'm not 100% sure of the terminology, but I think it means you have only one signal (image) coming from your computer going to two display devices, therefore both devices will have exactly the same image displayed. No matter how many mirrors you have in front of you, you will still see only your reflection in all of them. |
Question: | Does this device require a power source in order to function |
Answer: | Usually the device receives power from pin 9 of the VGA connector on your PC, but some older PC VGA connectors do not supply power. If after plugging the VGA input connector into and powering up your PC, if the splitter's blue LED does not illuminate, you will have to supply power via the splitter's micro-USB (not mini-USB as one reviewer mentioned) connector. Power may come from a USB connection on your PC or from a smartphone or other USB charger. |
- 1 VGA IN, 2 VGA OUT. Support ultra high 250 Mhz video bandwith.(just can show the same image,not different images.)
- Superior video quality - 1920x1400@60Hz. DDC, DDC2, DDC2B Compatible.
- Amplifies video signal and transmission distance Input up to 16 feet, output up to 164 feet.
- Units can be daisy-chained to handle as many monitors as the installation requires,making an excellent solution for public broadcast system.
- Ideal for public broadcasting;remote monitoring,classroom and training facilities.
User questions & answers
Question: | Is this what I'd need to set up 2 monitors, and I'd assume a 3rd vga cable |
Answer: | Yes you need this device. If you’re setting up a full pc to a monitor, then you’ll need only an hdmi cable and extend the screens. But if you have 2 monitors to a system unit then use this with three vga cables |
Question: | Does this only mirror the first monitor or can you make it extend the monitor |
Answer: | It only mirrors the first monitor. |
Question: | Does this come with a DC power supply |
Answer: | No. I comes with a usb cable which plugs into your computer in order to supply power to the VGA splitter. |
Question: | Can this be used for Dual monitors for a Mac |
Answer: | Hi,That is a vga splitter,if you want to connect a mac used for dual monitor,you can choose this hdmi splitter:https://www.amazon.com/HDMI-Splitter-Support-Ultra-1080P/dp/B075TB6B1T/ref=sr_1_21?ie=UTF8&qid=1531893566&sr=8-21&keywords=jidetech |
Product description
Tripp Lite's 6-ft. SXGA/UXGA Monitor "Y" Splitter cable provides an inexpensive alternative for splitting the video signal from your PC's VGA port to 2 High-Resolution monitors that use standard 15-pin plugs. 75-ohm coax conductors used for RGBHV signals allow for use with monitors with up to 1600 x 1200 resolutions. Perfect for laptops to display on a separate, larger monitor. Use for short distance applications only. For applications that require longer distances and highest resolution, see Tripp Lite B114-002-R, powered 2-Port Splitter, or, B114-004, powered 4-port Splitter. To extend your desktop onto a second monitor, see Tripp Lite U244-001-VGA-R.
Key Features- HD15 Male to 2 x HD15 Female w/Hex Nuts
- RGB cable construction supports resolutions up to 1600 x 1200
- Molded, double-shielded construction for maximum EMI/RFI protection
- Two monitors display the same image from one PC
- Inexpensive solution for presentations
- Lifetime limited warranty
- Splits the SXGA/UXGA signal providing simultaneous display of the same image on two monitors
- HD15 Male splits to 2 HD15 Female, 6-ft
- RGB cable construction supports resolutions up to 1600 x 1200
- If looking to display two different images on two monitors, add a second VGA port to your computer with U244-001-VGA-R
User questions & answers
Question: | Will this allow extended desktop setting or only mirrored setting |
Answer: | Depends on your video card. |
Question: | How good is the resolution |
Answer: | I have very good resolution and will buy it again .. |
Question: | This only is mirroring on both of my screens. It cannot pickup on my second monitor |
Answer: | yes,just a mirror only. |
Question: | will this allow me to use with 2 dell monitors and the monitors won't mimic the other |
Answer: | Thanks for reaching out about the P516-006-HR. This cable will mimic the display on your 2 Dell monitors. For extending your desktop we recommend the U244-001-VGA-R. If you would like to talk through your application, please contact our Chicago-based Presales Applications Team and they will happily assist you. |
Product features
Splits VGA Video Signal for Simultaneous Display on 2 HD 15-Pin Monitors
The P516-006-HR High-Resolution SXGA/UXGA Monitor 'Y' Splitter Cable offers an easy, inexpensive solution for splitting the video signal from one VGA port for display on two high-resolution 15-pin monitors simultaneously. Featuring one HD15 male connector for a computer and two HD15 female connectors for monitors, this six-foot cable features 75-ohm coax conductors that support resolutions up to 1600 x 1200. To display different images on two monitors, add a VGA port to your computer with Tripp Lite’s U244-001-VGA-R USB to VGA adapter.
Compatible with PCs/Macs and Superior Quality
Perfect for displaying the video signal from a notebook computer on two larger SXGA or UXGA monitors for easier viewing of presentations, the P516-006-HR is compatible with any PC or Mac equipped with a 15-pin female VGA CPU port. It’s designed for short-distance applications only (if you require long-distance video signal transmission, choose Tripp Lite’s B114-002-R or B114-0H4 video splitters).
The P516-006-HR is manufactured using top-quality materials. Premium double shielding provides maximum EMI/RFI protection to ensure a consistent, clean video signal. The HD15 connectors have integral strain-relief for durability and long life.
Lifetime Product Warranty and Environmentally Responsible Design
The P516-006-HR comes with a lifetime product warranty. It’s manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.
Why Choose Tripp Lite?
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect and protect your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat6 signal extenders. Whether you need to connect high-speed networks to switches, routers and servers in your data center, or send high-resolution video signals to displays and digital signs, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.
Product description
Exquisite portable design allows you to convert most of the analog VGA on PCs and laptops into monitors, projectors and large-screen TVs, etc.,
and the devices connected to the HDMI and VGA interfaces can be used simultaneously. Plug and play, very easy to use.
Specification
Supports Resolution:
Converter support VGA input resolution from 800*600 to 1920*1080 for PC.
Support HDMI Output resolution up 720P/1080i/1080P for HDTV/Projector/Monitor.
Features
Share your video/audio/data from computers or notebooks, desktops, laptops that has only VGA port to any HDMI and VGA – equipped devices like
HDTVs, monitors, Projector, displayers for big screen viewing.
Plug-and-play, automatically sense the native resolution of the display and scale the computer's output to match it.
The converter will take audio signal from the computer and embedded it into the HDMI signal output, so that the user is able to enjoy both audio and video
through a single cable.
Compatible Mode:
The usually use system: win7, win8, win10.
How to use:
1) Insert the VGA interface into the computer or other equipment with the VGA output.
2) Plug the USB and Audio connector into the related interfaces.
3) Connect the HDMI or VGA cable to the HDMI or VGA female interface, and then connect the cable to the monitor with the corresponding interface,
projector, large screen TV, etc.
4) Play the video, PPT and documentation, the images will be displayed on the screen of the other display device.
Delicate packaging includes
1*VGA Input To HDMI Output 1080P HD Audio TV AV HDTV Video Cable Converter Adapter
1*Audio Cable
1*Usb Cable
1*User Manual
- 【Incredible performance】 The HDMI and VGA interfaces of this adapter can be displayed at the same time.The VGA male to HDMI female converter support VGA input resolution from 800*600 to 1920*1080 for PC. Support HDMI Output resolution up 720P/1080i/1080P for HDTV/Projector/Monitor.
- 【HD performance】 Imported super quality adapting chipset, This converter is NOT bi-directional,It is vga to hdmi vga adapter, convert the vga signal into two signals, hdmi and VGA and display them simultaneously, converting and outputting VGA signal to HDMI and VGA display devices. and USB power supply is necessary.
- 【Plug and play】 No driver needed, easy to use, fast, convenient and compact. Gold-plated HDMI interface, high wear & corrosion resistance, stable and durable for HD data transmission.
- 【Wide compabitity 】The VGA-HDMI VGA Adapter is compatible with old-styled notebooks, desktops, laptops, Projector which only has VGA ports to any HDMI VGA equiped devices.
- 【After Sale】Exclusive Onten Unconditional after sale ensures long-time satisfaction of your purchase; Friendly and easy-to-reach customer service to solve your problems in 24 hours.
User questions & answers
Question: | How do I change my host display? I want my main display to be vga and my second on my hdmi drawing tablet |
Answer: | First of all, if you are WIN7: 1. First, right-click on a blank space on the desktop to open the menu, find the screen resolution option, and click to enter. 2. If you have linked two monitors with this product, the drop-down effect will be displayed. If the two monitors are not displayed, click "Detect" to detect, and then click the button box behind the multi-monitor. You can see two options: "Copy these displays" and "Extend these displays"; 3. If you choose "Copy these displays", you will see exactly the same Windows window on both monitors. WIN10: 1. Under Win10, left-click the start button, and in the pop-up menu option box, click the "Settings" option; 2. After clicking the setting option, the "Settings" dialog box will open at this time 3. In the settings dialog box, find and click the "System (display, notification, application, power)" option 4. In the opened system dialog box, select the "Display" option on the left. In the right pane of the display, you can see the currently connected monitor 5. Under multiple displays, select "Extend these displays 6. This is the external display screen. You can drag the software on display 1 to display 2. 7. If you need to copy the screen of display 1 to display 2, select "copy these displays" under multiple displays |
Question: | Every time I connect the adapter it can’t use any of the resolution on my pc and it says it can do those resolutions. What is wrong with it |
Answer: | In mirror mode, the resolution of the other monitor should be adjusted to the same resolution as the host display. |
Question: | Can anyone (seller perhaps?) tell me what to buy with same connection setup but allows you to extend your screen |
Answer: | It allows to expand the screen. |
Question: | Can you extend your screen with this device or does it only replicate the main screen |
Answer: | Replicate the main screen. |
Product description
IT OSAYDE VGA cable adapter sends the same VGA signal to two separate VGA monitors
The IT OSAYDE VGA cable has one that can be plugged directly into a computer (or other device), and the signal output on the VGA splitter line is connected to two independent displays
Video resolution support for 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA) and 1080p for high-resolution LCD and LED monitors; audio must be transmitted separately
The IT OSAYDE VGA cable is designed for frequent use and long life, with a 1-year warranty
- IT OSAYDE VGA cable adapter sends the same VGA signal to two separate VGA monitors
- The IT OSAYDE VGA cable has one that can be plugged directly into a computer (or other device), and the signal output on the VGA splitter line is connected to two independent displays
- Video resolution support for 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA) and 1080p for high-resolution LCD and LED monitors; audio must be transmitted separately
- The IT OSAYDE VGA cable is designed for frequent use and long life, with a 1-year warranty
User questions & answers
Question: | is it for only duplicate screen only? Does it support extended mode as well |
Answer: | yes it is only a screen duplicator. It does not support extended modes. |
- ✅VGA Splitter 1 In 2 Out- Distributes video signal from one single source to 2 displays simultaneously, and provide HD presentation, NO flash, NO lag or drop in resolution.✅(NOT VGA switcher, 2 output displays will show the same picture.)
- ✅High Definition Screen-Support resolution up to1920X1440p and support ultra high 220 Mhz video bandwith.You can share the most luxurious video with your friends or families.✅(Please make sure the resolution of both output devices is the same to ensure normal operation.)
- ✅Long Distance Transmission-This dual ports VGA Splitter provides you an extra long distance for video transmission.The distance can reach up to 98ft. Allow you duplicate the screen to different rooms.(VGA cable not included)
- ✅Wide Compatibility-This VGA video splitter suit for most devices with standard VGA interface. Input: Laptop, TV box, Blu-Ray DVD player, desktop PC etc. Output: Projector, Full HsD TVs, Apple TV, Samsung TV, Monitors etc.
- ✅ Simple to Use-This 2 ports VGA splitter is easy to setup and operate. Just connect your devices and the AC adaptor. It is ideal for public broadcasting, remote monitoring,classroom and training facilities.
User questions & answers
Question: | How long distance this vga video splitter support? I have vga cable with 100ft |
Answer: | Thanks for your question, this dual vga splitter features an integrated booster circuit that allows the video signal to be extended up to 98 feet. |
Question: | Does this 2 port vga splitter can transfer two signal? can i use it with my 4k tv |
Answer: | No, this vga splitter dual monitor can't split two different siganl, just duplicate one video signal from one single source to 2 displays simultaneously, 2 dispplay will show the same screen. This item can not support 4K, support resolution up to1920X1440p. |
Question: | Can this dual vga splitter transfer the video and audio at the same time |
Answer: | This vga splitter with 2 output ports just transfer video, can not transfer audio, so you need connect audio device if you want transfer the audio. |
- Compact and light weight design of TV splitter. Easy to install--plug and play. Great for running a monitor at the light board, spot lights, and director table (the sound board operator used the ipad display)
- 1 VGA IN, 4 VGA OUT. Support ultra high 150 Mhz video(-3dB) bandwith.Output the same video and audio to four other devices.
- Enhance video singals for distance to 30 meters. Can be daisy chain. Support resolution is up to 1920*1440.
- Perfectly for test bench facilities, data centers, help desks, video broadcasting presentations,stock quotes, timetables, movie, cinema, classroom, meeting room,educational facilities and so on.
- Package Included: VGA Splitter x 1, AC Adapter x 1, User Manual x 1. Notice: there is some improvement of appearence but the functions are same and the NEW Version will be more lightweighted.
User questions & answers
Question: | Can you use this with a USB to Video out |
Answer: | Yes you could but you need cable with male connector and usb adapter. Adapter must be female in one end and usb in another. |
Question: | what would you suggest getting to expand to multiple monitors |
Answer: | This displays the same image on 4 monitors. It does not "extend" 1 output to 4 separate outputs. I used this for testing 4 monitors at a time side by side. |
Question: | Can I use three different size monitors with this splitter |
Answer: | You can use three different sized monitors. However, the resolutions on them will all be the same as this simply mirrors the image coming from the video source. I am using a setup where 2 outputs are going to standard monitors, one to a 32" television, and the last going to a large projector. |
Question: | Can I view different items on different monitors at one time, or do all monitors show the same image at any given time |
Answer: | same image with this item , to view other things you would need a different video card. dual monitor card |
Product features
1 VGA IN, 4 VGA OUT
Compact and light weight design of TV splitter. Easy to install--plug and play.
Support resolution is up to 1920 x 1440
Can adjust different resolutions.
Bulit with signal booster
Enhance video singals for distance to 98 feet (30M).
This is a 4 ports VGA splitter which takes the computer's VGA singal and displays it on 4 analog monitors.
It is also a boosting device that extends the video signal transmission distance to 98 feet (30 m), making it an excellent choice for video broadcast systems. This video splitter is also great for home television system and helps you and family to enjoy every moment when watching operas or competition or Olympics or President speech or witnessing annual exciting festival time like Christmas day, Halloween Day or the like. Very durable to use, you do not need to buy new one after 1-2 months.
Product description
Supports Resolution:
Converter support VGA input resolution from 800*600 to 1920*1080 for PC. Support HDMI Output resolution up 720P/1080i/1080P for HDTV/Projector/Monitor.
Features:
Share your video/audio/data from computers or notebooks, desktops, laptops that has only VGA port to any HDMI and VGA – equipped devices like
HDTVs, monitors, Projector, displayers for big screen viewing.
Plug-and-play, automatically sense the native resolution of the display and scale the computer's output to match it.
The converter will take audio signal from the computer and embedded it into the HDMI signal output, so that the user is able to enjoy both audio and video through a single cable.
Compatible Mode:
The usually use system: win7, win8, win10.
How to use:
1) Insert the VGA interface into the computer or other equipment with the VGA output.
2) Plug the USB and Audio connector into the related interfaces.
3) Connect the HDMI or VGA cable to the HDMI or VGA female interface, and then connect the cable to the monitor with the corresponding interface, projector, large screen TV, etc.
4) Play the video, PPT and documentation, the images will be displayed on the screen of the other display device.
Delicate packaging includes
1*VGA Input To HDMI Output 1080P HD Audio TV AV HDTV Video Cable Converter Adapter
1*Audio Cable
1*Usb Cable
1*User Manual
- ★Incredible performance: HDMI and VGA interfaces of this adapter can be displayed at the same time.The VGA male to HDMI female converter support VGA input resolution from 800*600 to 1920*1080 for PC. Support HDMI Output resolution up 720P/1080i/1080P for HDTV/Projector/Monitor.
- ★HD performance: Imported super quality adapting chipset, This converter is NOT bi-directional,It is vga to hdmi vga adapter, convert the vga signal into two signals, hdmi and VGA and display them simultaneously, converting and outputting VGA signal to HDMI and VGA display devices. and USB power supply is necessary.
- ★Plug and play: No driver needed, easy to use, fast, convenient and compact. Gold-plated HDMI interface, high wear & corrosion resistance, stable and durable for HD data transmission.
- ★Wide compabitity : The VGA-HDMI VGA Adapter is compatible with old-styled notebooks, desktops, laptops, Projector which only has VGA ports to any HDMI VGA equiped devices.
- ★After Sale : Exclusive GrayRabbit Unconditional after sale ensures long-time satisfaction of your purchase; Friendly and easy-to-reach customer service to solve your problems in 24 hours.
User questions & answers
Question: | Will it work for mac mini |
Answer: | No. |
- VGA dual monitor adapter sends an identical VGA signal to two separate VGA displays; Reliably transmits an identical signal to two separate monitors; VGA cables (sold separately) are required
- Duplicator VGA splitter dual monitor has a male connector that plugs directly into a computer; Two female VGA sockets on the VGA splitter cord connect to the VGA cables of two separate displays
- Video resolution support for 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), and 1080p for high resolution LCD and LED monitors; Audio must be transmitted separately
- Sturdy construction of the monitor splitter adapter supports the weight of 2 VGA cables; Engineered for frequent use and long life and backed by a lifetime warranty
- Universal VGA compatibility with computers and displays; Also known as RGB, DB-15, DE-15, HD-15, HDB-15 or D-sub 15
User questions & answers
Question: | Can i move something from 1 screen to the other |
Answer: | Yes both screens will workWhen connecting screens I have an HDMI cable for the one main screen and the other screen is connected by the Y-Splitter Cable |
Question: | So it works if you want double screen or triple screen monitors for the same computer |
Answer: | I am not sure about triple screen. The first time I needed double screens it required a card to be inserted in the PC and the use of the cables. My new computer required a set of drivers be installed and the cable. Hope this helps. |
Question: | extend |
Answer: | It works well for me. |
Question: | I need to share one projector with a vga connector i will need to connect two diffrent inputs but they will only use one input at a time |
Answer: | Im not sure of what you're trying to do, but when I hooked that up to my computer, I was using the one output from my tower and put it to two inputs on the monitors. |
Product features
Mirrored Displays (Duplicated Content On Both Displays)
The Cable Matters VGA Monitor Y-Splitter Cable is a great solution for duplicating images from a computer to two identical screens. Applications include security monitors, conference room presentations, or video in a house of worship.
Important Notes
- Connecting a long VGA cable may degrade the video appearance
- Passive cable only duplicates (does not extend) the PC screen to a monitor
Product description
Mirror Mode only, this product does not support Extend Mode. It can only transfer signal from one source device (Laptop or Computer) to two displays or monitors or HDTVs.VGA splitter is very suitable for PPT display in conference room and classroom.
- Mirror Mode Screen Duplication: Mirror Mode only, this product does not support Extend Mode. It can only transfer signal from one source device (Laptop or Computer) to two displays or monitors or HDTVs.VGA splitter is very suitable for PPT display in conference room and classroom.
- Perfect compatibility:VGA splitter is compatible with Windows XP / Vista / 7 / 8 / 10, Mac OS, Linux, plug and play does not require driver installation.Supports VGA, SVGA, XVGA, UXGA.(PS:VGA out1 interface supports DDC. The computer can recognize and adjust the display resolution automatically without manual adjustment.But the VGA out2 interface does not support automatic adjustment)
- Support 1080P display:VGA splitter supports 1080p HD display with 250MB bandwidth.DC 5V / 1A power supply interface, enhance the stability of VGA switch transmission.(PS:When the signal source has no current output or insufficient power supply please connect the power.)
- Excellent workmanship:1.Gold Plated interface connection more stable. 2.ABS and aluminum alloy shell,good heat dissipation strong and durable. 3.With 1m VGA cable more convenient to use. 4.Built-in high performance chip magnify the input signal,support 30m distance transmission.
- Applicable equipment:Computer、Laptop、Monitor、Projector...
User questions & answers
Question: | Can you connect two computers to one monitor, and swtich between the inputs |
Answer: | No. This models adjusts to multiple speakers, it is secured and heavy. |
Question: | Does the device need to be connected to a power supply to work |
Answer: | You need a Sonos amp that you can connect to the output sound from your TV, or you can get a Sonos sound bar and you can connect them all and us these as surround speakers. |
Question: | Does this support extended displays such as having different content on each display |
Answer: | They are speaker stands, not speakers. |
Product features
Postscript:Using vention VGA cable to connect the VGA splitter, the display effect is more stable and better !
Mirror Mode only, this product does not support Extend Mode. It can only transfer signal from one source device (Laptop or Computer) to two displays or monitors or HDTVs.
- Support synchronous display
1 PC simultaneously connects to 2 VGA display devices
- Support DDC Function
Automatic adjustment to the best resolution(PS:Only vga1 interface is supported)
- Support 30m transmission distance
Built in high performance chip, supporting 30m transmission distance.
- Supprt 1080P HD display
VGA splitter supports 1080p HD display with 250MB bandwidth.
30M Distance
Built-in high performance chip magnify the input signal,support 30M distance transmission.
With VGA Cable
With 1M VGA cable more convenient to use.
LED Indicator
Blue light show its working status.
DC 5V Power Supply:Provide current support ensure the stability of equipments
Gold-plated process
All interfaces are gold-plated for greater durability and increased connection stability
Latest Reviews
View all
Barn Door For Closet
- Updated: 23.04.2023
- Read reviews

Low Floor Chairs
- Updated: 06.01.2023
- Read reviews

Infrared Tv Controls
- Updated: 22.05.2023
- Read reviews

Bosch Palm Router
- Updated: 29.04.2023
- Read reviews

Smartphone Protective Case
- Updated: 27.06.2023
- Read reviews