12 best link depot sata cables

Product description

This Link Depot 4-Pin PC Power to SATA Power Adapter converts a Molex PC power connector to a SATA power connector. It is equipped with one Molex connector with 4 male pins on first side, and one keyed SATA connector on the second side. The cable jacket reacts to ultraviolet light, and creates a customized glow for your computer case when paired with compatible in-case lighting.

• 4-pin PC power to SATA power adapter
• Converts a Molex PC power connector to a SATA power connector
• One Molex connector with 4 male pins on first side
• One keyed SATA connector on the second side
• Cable jacket is UV reactive and helps create a customized glow for your computer case

Product description

The Link Depot 1.5-foot SATA 3Gbps Straight to Right Angle Cable is a fast and dependable data transfer solution.

• SATA II cable
• 90-degree plug for low-profile installation
• Locking plug for a secure fit
• The blue cable jacket is UV reactive, and helps create a customized glow for your computer case
• 1.5 feet long

Product description

USB2.0 TO IDE/SATA Adapter Cable W/POW

• USB 2.0 to SATA/IDE Cable
• 480 Mbps speed
• Dependable data transfer solution
• Size: 10.5 x 2 x 16 inches
• Hot swappable: plug-and-play feature

Product description

This Link Depot eSATA to SATA Cable comes equipped with one eSATA connector and one SATA connector, making it perfect for connecting external drive enclosures or other equipment to your PC. It provides data transfer rates up to 3Gbps. The Smart Latch connection ensures a secure fit for your components. The rounded cable design minimizes tangles and creates better airflow for in-case applications. This cable is 6 feet long.

• Cable provides an eSATA to SATA connection
• 3Gbps maximum data transfer rate
• Smart Latch connection for a secure fit
• Rounded cable design minimizes tangles
• 6 feet long

Product description

This Link Depot SATA II Cable provides data transfer rates up to 3Gbps. It is equipped with a locking plug for a secure fit. The cable jacket reacts to ultraviolet light, and creates a customized glow for your computer case when paired with compatible in-case lighting. It is 3 feet long.

• SATA II cable
• 3Gbps maximum data transfer rate
• Locking plug for a secure fit
• The blue cable jacket is UV reactive, and helps create a customized glow for your computer case
• 3 feet long

Product description

This Link Depot eSATA to SATA Cable comes equipped with one eSATA connector and one SATA connector, making it perfect for connecting external drive enclosures or other equipment to your PC. It provides data transfer rates up to 3Gbps. The Smart Latch connection ensures a secure fit for your components. The rounded cable design minimizes tangles and creates better airflow for in-case applications.

• Cable provides an eSATA to SATA connection
• 3Gbps maximum data transfer rate
• Smart Latch connection for a secure fit
• Rounded cable design minimizes tangles
• 3 feet long

Product description

Apricorn’s SATA Wire 3.0 is the easiest way to upgrade your notebook drive. Packaged with our user-friendly Cloning Software and using an ultra-fast USB 3.0 connection for up to 10x faster data transfer rates than USB 2.0, you can clone your notebook drive in a snap. If your notebook is running out of space or you are looking to upgrade to a faster high performance hard drive or solid state drive, Apricorn’s SATA Wire is the perfect tool. Providing a USB 3.0 connection to ANY 2.5 inch notebook hard drive or solid state drive and bundled with Apricorn’s Upgrade Suite Software, the SATA Wire enables you to upgrade your notebook’s drive in three simple steps. Connect the SATA Wire to your drive and to the USB 1. port on your computer Run the included EZ Gig IV or ShirtPocket cloning 2. software to copy all of your data, email, settings and OS from your notebook to the new drive Swap out your old notebook drive with your new 3. one, and you’re done. EZ Gig IV Cloning software is a powerful, yet easy to use tool that gives you the option of creating an exact clone of your hard drive - perfect for hard drive upgrades or for creating bootable backups of your system. Or for those who wish to clone to a smaller capacity drive, such as fast solid state drive, EZ Gig’s Data Select option enables you exclude selected media files from the copying process to save space. Now you can run your OS and applications from a fast, smaller SSD boot drive, while keeping your documents and media files on your original hard drive. The SATA Wire is also perfect for transferring data to bare drives or for creating backups of your system. Now there’s no excuse when it comes to backing up or upgrading your system, just use Apricorn’s SATA Wire.

From the Manufacturer

Apricorn’s SATA Wire 3.0 is the easiest way to upgrade your notebook drive. Packaged with our user-friendly Cloning Software and using an ultra-fast USB 3.0 connection for up to 10x faster data transfer rates than USB 2.0, you can clone your notebook drive in a snap. If your notebook is running out of space or you are looking to upgrade to a faster high performance hard drive or solid state drive, Apricorn’s SATA Wire is the perfect tool. Providing a USB 3.0 connection to ANY 2.5 inch notebook hard drive or solid state drive and bundled with Apricorn’s Upgrade Suite Software, the SATA Wire enables you to upgrade your notebook’s drive in three simple steps. Connect the SATA Wire to your drive and to the USB 1. port on your computer Run the included EZ Gig IV or Shirt Pocket cloning 2. software to copy all of your data, email, settings and OS from your notebook to the new drive Swap out your old notebook drive with your new 3. one, and you’re done. EZ Gig IV Cloning software is a powerful, yet easy to use tool that gives you the option of creating an exact clone of your hard drive - perfect for hard drive upgrades or for creating bootable backups of your system. Or for those who wish to clone to a smaller capacity drive, such as fast solid state drive, EZ Gig’s Data Select option enables you exclude selected media files from the copying process to save space. Now you can run your OS and applications from a fast, smaller SSD boot drive, while keeping your documents and media files on your original hard drive. The SATA Wire is also perfect for transferring data to bare drives or for creating backups of your system. Now there’s no excuse when it comes to backing up or upgrading your system, just use Apricorn’s SATA Wire.

• Connects to any 2.5 inch SATA Hard Drive or Solid State Drive
• Creates a Super Speed USB 3.0 interface to a 2.5-Inch SATA Drive
• Clone your hard drive in a fraction of the time
• Perfect for upgrading your notebook hard drive or transferring data to bare drives
• Apricorn's SATA Wire 3.0 is the easiest way to upgrade your notebook drive with backwards compatibility with USB 2.0 and USB 1.1

User questions & answers

Question:	I have aDell N5110 with a blank drive, i want to clone to it without removing it from the laptop. Is it possible
Answer:	I think the 13.8V output is connected to the terminal posts and the cigarette lighter. So you should be able to get 9 amps from either the terminal posts or the cigarette lighter, or 4.5 amps from both, etc. I think that if you're drawing 9 amps from the 13.8V output, you should still be able to get 2 Amps from the 5 volt USB output, as a bonus. I'll bet you a buck.
Question:	I don't think changing upgrading will be that hard but, hoe do I know if I need the USB 2 or USB 3? I have a HP Pavilon dv7 with Vista.. Works great but HD to small.. Thanks, Jim
Answer:	Hi, yes the cigarette lighter socket is exposed. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSV150 for more details. Thank you.
Question:	I am buying a Crucial m4 256 GB SSD Sata III at 6Gb/s, will the cable support that speed? I don't want to buy a usb 3.0 that will run as a
Answer:	About 5 amps. This unit is great for tiny loads. Don't expect it perform at anything higher than that. This unit is very under rated. I bought a 50 amp unit on eBay that's awesome, paid over $130 for it, but that might be what you need instead of this. Not Recommended for anything higher than 5 amps.
Question:	My laptop does not have an optical drive. Do you have to use the CD or can you get the same information online
Answer:	Hi, that will depend on the specs of your device. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSV90 for more details. Thank you.

Product description

Kingwin 3FT SATA (Male) to SATA (Male) with Clip Data Cable

• Product Type:Electronic Cable
• Item Package Dimensions:17.78 cm L X 15.24 cm W X 1.524 cm H
• Item Package Quantity:1
• Country Of Origin: China

Product description

The USB 3.0 to eSATA adapter cable lets you connect any external eSATA hard drive, solid state drive, or optical disc drive to your USB-enabled computer system -- a great solution for computers that don't natively support eSATA, such as MacBook and Ultrabook computers. Maximum Performance To maximize performance and utilize the speed potential of your SATA 6 Gbps drives, the eSATA HDD cable is compatible with SATA revisions I/II/III and supports transfer speeds up to 5 Gbps through USB 3.0. Broad Compatibility With support for Blu-ray/DVD/CD ATAPI / ODD drives and large capacity HDD / SSDs (tested up to 4TB) the USB hard drive cable is compatible with virtually any eSATA device, and can greatly increase the storage/backup capabilities of your computer. The hard drive adapter cable ensures a hassle-free connection with simple plug-and-play installation, plus the cable is the perfect length (1-meter, end-to-end) for easily accessing the rear panel USB ports on your computer. This USB 3.0 to eSATA converter cable is backed by a StarTech.com 2-year warranty and free lifetime technical support.

• ADD AN EXTERNAL HARD DRIVE: This 3ft / 1m USB 3.0 to eSATA adapter lets you connect any external eSATA hard drive (HDD), solid state drive (SSD), or optical disc drive (ODD) through the USB 3.0 port on your laptop or desktop.
• MAXIMUM COMPATIBILITY: Easily connect your USB-enabled computer or laptop, such as your Dell OptiPlex or MacBook to a SATA drive using this eSATA HDD cable.
• COMPACT DESIGN: This hard drive adapter cable features a compact, portable form factor design that fits perfect in your laptop bag, making it ideal for professionals on the go.
• HIGH TRANSFER SPEEDS: For fast access to external storage, this USB to eSATA converter cable supports transfer rates up to 5Gbps using USB 3.0.
• INDUSTRY-LEADING PRODUCT SUPPORT: Backed by a 2-year StarTech.com warranty, this USB hard drive cable also comes with free lifetime technical support.

User questions & answers

Question:	Can you use this to connect an external hard drive to a DirecTV box
Answer:	You would need the U25D for the DMR part it would increase the range of the hotspot but your HT wouldn't reach the hotspot in other words you would hear the hot spot but the hotspot wouldn't hear you so it would never activate also the emissions would be high around the hotspot you would be better off changing antennas on both for high gain antennas.
Question:	does anyone know if this works with G-Technology drives
Answer:	Yes. The ctcss tones are already in the fm signal by the time it gets to this amp for transmit. For receive the receiver preamp similarly cannot strip off the ctcss either. It passes ctcss in both directions.
Question:	I have an eSATA port on my motherboard. I want to hookup USB 3 devices via this cable to the eSATA port on PC. Possible
Answer:	This is an amplifier for transmission only. So it will not help a scanner.
Question:	Can i use this for an esata enclosure with port multiplication
Answer:	No. Will handle some digital modes. Designed primarily for FM.

• Benfei SATA III cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately.
• 6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. Data transfer speed is limited by rating of the attached equipment.
• Cost-effective 3 Pack Combo: 3 Pack SATA 3 cable is a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration.
• Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer.
• What You Get: Benfei SATA 3 cable 18inch(3PCS in one package) x3, 18-month warranty and lifetime friendly customer service.

User questions & answers

Question:	Do the cable connectors have the internal bumps that WD recommends for their Red drives so that the cable attaches snuggly
Answer:	A.M. and f.M. only
Question:	I purchased an additional hard drive for my new computer which this cable will work with for data. Can't find a power cable for it. Any suggestions
Answer:	Mostly, James Bloch is wrong. This can work AM or FM. However, no one uses FM in the U.S. Europe has FM channels. So this isn't really the right radio for the U.S. And an argument can be made that the vendor is trying to make a quick buck off of people that don't know about radio stuff. I've been a Ham for 45 years. The 10 Meter Ham-band is 28.0000 to 29.7000 MHz. Ham radio equipment reads out the frequency to 6 decimal places. Damned if I can figure out how a 40 channel readout can tell you what frequency you're on. Also, the manual keeps repeating: "Note: This Function is valid only when the radio work in HF model or HAM model." In no case can I figure out what criteria they're trying to describe. Normal CB put out 12 watts. This one puts out 20 watts. That's less than 1/2 S-unit increase. Is this radio worth the trouble, just to get 1/2 S-unit over a legal CB set? Between that and the shady marketing practices, I would boycott Stryker for putting their name on this. I still say for 140 dollars, you can get a Uniden 980 that includes SSB single side band -- and Weather receiver to boot. 12 watts of SSB (such as from a legal CB) will give superior performance to 20 watts of AM, the FM capabilities on this are a waste in the U.S. And the manual which I found on the internet doesn't even describe how a 40 channel readout works for 28.0000 to 29.7000 MHz. In summary, it's a lie that this radio was ever intended to be used as a Ham radio (synonymous with Amateur Radio). They market it as such because they're embarrassed to admit the radio was produced for use on the CB band. It's just a bad choice for CB, and if you want to go Freeband off the CB channels, you'll still want SSB for maximum performance (distance). On that note, FM is good for local communications -- it is a poor choice if you're looking to make distance contacts.
Question:	Do i actually get the sata iii speeds with a normal motherboard? or do i need to buy a special motherboard or something that has sata iii capabilities
Answer:	no
Question:	Is this unit easy to use
Answer:	It's a 10 meter radio, so it requires an antenna trimmed for 10 meters. Stryker sells the A-10, which is great for trucks. If you are planning to convert this to 11 meters so you can communicate with it on the Citizens Band, then you will need an antenna trimmed for 11 meters. Please note, this (like any other 10 meter radio) is not a CB.

Product features

Wide Compatbility

• 2.5" SSD drive
• 3.5" HDD drive
• Optical DVD drive
• RAID controller host card

SATA III At Up To 6 Gbps

• The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, backwards compatible with SATA I and SATA II. Please be kindly noted that it's just a Data transfer cable which could support 6Gbps, while the actual speed is limited by the rating of your attached equipment.

Feature-Filled Cable

• 7-Pin SATA L Type key receptacle
• Stainless steel clip
• Easy-grip surface

User-Friend Design

• SATA I, II, III compatible
• Low-profile cable jacket
• Easier routing in a computer

Easy to Use

• Plug in and Play, no any software installation required.

Product description

This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive.

The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space and does not impact airflow.

• Storage controller
• 1 Channel
• ATA
• 133 MBps
• SATA

User questions & answers

Question:	Will the sata drive be bootable when connected through this adapter
Answer:	No unless the hard drive you are cloneing from is removed. If the clone is installed in the computer then you can not do it.
Question:	Does it come with a 4-pin power cable for that white connector on the side? does it require it's own power or does it share the hdd's power
Answer:	The USB 3 connection is backward compatible with the USB 2 ports. Since you are running Vista, your USB ports are probably USB 2 and you might be able to find the USB 2 version of the Apricorn hard drive cloning adapter at a lower price. Either version will work with USB 2 or USB 3 ports on the computer. The advantage of the USB 3 version is that it is much faster if the computer also has USB 3 ports. If either the port or the Apricorn adapter is USB 2, then the transfer will run at USB 2 speed.
Question:	Does this adapter allow connecting a (2.5) ide drive to a sata motherboard
Answer:	This cable will ONLY transfer data at the USB 2.0 speed, but is compatible with USB 3.0 devices connected to either end. I use mine plugged into a USB 3.0 port with the other end connected to either my original Notebook Sata II hard drive, or the replacement Sata III SSD replacement. I have had no problems at all, and I now use the cable to clone the original laptop hard drive once a month so that I have a very up to date backup for that one day down the road when the SSD drive decides that its life expectancy is finally over.Apricorn also sells a USB 3.0 cable instead of this USB 2.0 model. It just transfers data at a faster rate, and is backward compatible with USB 2.0 devices.My Apricorn USB 2.0 cable cloned 50 GB of data from my laptop drive to the new SSD drive in 40 minutes in Windows 7.0. It now clones the SSD drive back to the now removed laptop drive in 40 minutes. I will guess that the USB 3.0 version of this cable would do the same transfers in about half the time.I am very happy with my Apricorn USB 2.0 cable and its very simple to use software, and it has a very cheap price. If I had to buy again I probably would opt for the USB 3 version because it is faster. Hope all this helps you Luis.
Question:	Can i use this to install a sata hdd/ssd into a system that uses ide connections? does the power get connected to the hdd/ssd
Answer:	I believe that you can use this link to download the software needed for this device: http://www.apricorn.com/products/software/ezgig.htmlYou might also find answers for this product at this link: http://www.apricorn.com/product-support/upgrade-kits.html and for this specific product using USB 2.0 here: http://www.apricorn.com/product-support/upgrade-kits/sata-wire-333.html and USB 3.0 here: http://www.apricorn.com/product-support/upgrade-kits/sata-wire-3.html.I hope that this helps.

Product description

About Mcsher Brand Information

- Mcsher is registered trademark in the United States of America.

- Our team was established in 2010, we provide excellent quality products and greatly service.





Item Condition

- Brand-new, unused in perfect condition.





Item Description

- Serial ATA 3.0 cable supports data transfer speed at up to 6 Gbps and it are backwards compatible with SATA I and SATA II.

- Item for two SSD/SATA drives using the included SATA power splitter cord on the computer power supply. - To spare port ready for connecting SATA internal hard drives, optical drives, and DVD drives to power supplies.

- SATA Cable Length: 1.66 Feet / 50cm, 10pcs mounting Screws for HDD or SSD.

- This item is a handy addition to your toolbox when building, upgrading or repairing computers.





Specifications

- Brand new, Unused in perfect condition.

- Type: SSD HDD SATA Hard Drive Connection Kit Sit.

- SATA Cable Length: 1.66 Feet (50 cm).

- Color: Sky Blue





Package Includes

- 2 x 20" Inch 6Gbps SATA 3 Data Cable

- 1 x SATA Power Splitter Cord

- 10 x Mounting Screws





Compatible with

- SSD, HDD, Optical Drive.



NOTE: Please check the size carefully before purchasing, thanks for your support.





Warning: the product are small parts, keep away from children and kids.

• Serial ATA 3.0 cable supports data transfer speed at up to 6 Gbps and it are backwards compatible with SATA I and SATA II.
• Item for two SSD/SATA drives using the included SATA power splitter cord on the computer power supply.
• To spare port ready for connecting SATA internal hard drives, optical drives, and DVD drives to power supplies.
• SATA Cable Length: 1.66 Feet / 50cm, 10pcs mounting Screws for HDD or SSD.
• This item is a handy addition to your toolbox when building, upgrading or repairing computers.