12 best cat 7 connectors

Product description

Tired of constantly replacing corroded and faulty RJ45 connectors?



You have availed of the fastest internet connection service offered so you can watch all your favorite shows and play online games without lag or drops. Despite this, you still experience data interruptions or poor connections - all brought about by a rusty and damaged Ethernet connector.



If you are looking to make the most out of your lightning-fast Internet plan, you have to ditch ordinary RJ45 plugs. What you want is a plug that easily resists moisture, rust, and corrosion.



Solve your Ethernet plug frustrations by choosing Everest Media Solutions' Gold Plated Cat7 Ftp/Stp Connector.



Our Ethernet cable plug shows off a pass through feature, which allows you to view and check the order of your cable before you crimp the wire. This saves you time and effort, as it minimizes wire-crimping errors and mistakes.



This Cat7 connector features 8P8C FTP shielding, which promises improved data transmission and better signal strength when compared to unshielded plugs.



If you are using ordinary Ethernet plugs, these can easily get rusty over time, especially when they get exposed to moisture and humidity. Our gold-plated connectors last longer against corrosion, so you never have to keep regularly replacing plugs.



General Instructions:



1. after you discover the wires you will need to transfer them threw the plastic peace. in order to do that i recomend transfer the inside wires one by one, starting with the lower ones (the whites), then the upper ones (the colored).



2. Once its all went through, you will shake the wires making them straight as possible in order to easily slide the plastic peace with ease.



3. Look again that the wire are aligned, than cutting them in a straight line, make sure they are aligned again, then pass them through the holes.

With a bit of practice it will be very fast and easy.

• ✅ SAVES TIME & EFFORT - These RJ45 plugs feature a pass through design, which allows wires to pass through the connector so you can verify if they are in the correct order before crimping.
• ✅ FASTER DATA TRANSMISSION - Compared to traditional unshielded RJ45 plugs, our Cat7 pass through connectors are able to deliver better data transmission rates and increased signal strength.
• ✅ BUILT TO LAST - Unlike other Cat7 connectors that are copper or nickel-plated, our gold-plated RJ45 Ethernet plugs have an increased durability against rust, corrosion, moisture, and humidity.
• ✅ LONG-TERM PERFORMANCE - Tired of ordinary Ethernet plugs that easily snap or crack? Our Cat7 gold-plated connector features a strong and sturdy plastic build that promises many years of use.
• ✅ ENJOY HIGH SPEED CONNECTIONS - This Cat7 pass through connector boasts of 50-micron gold plating, which has been shown to deliver up to 4 times faster throughput than traditional metal connectors.

User questions & answers

Question:	Everest Media Solutions - Are you sure each of the crimpers you posted will work for this connector and have you tested them
Answer:	They are compliant with Cat6/Cat5e/Cat5 standards. So speeds up to 1Gbp/s. If your entire network is built for 1Gbp/s you should be fine as everything will have cross talk. If your switching, wiring, networking equipment and inbound/outbound connection all have capacity of above 1Gbp/s you'll need shielded. If you contact us with your intended use we could provide better insight. Generally Cat6 1Gbp/s is everywhere and is pretty standard right now for deployments. 6A/Shielded (above 1Gbp/s) is more rare/special circumstances.
Question:	why does the discription say cat 7 cat 6a and the cable spec says cat
Answer:	Does not fit side by side in a decora sized wall plate. The jack’s back end is wider than he keystone width.
Question:	My outside diameter is 7.8mm, will these work for that size
Answer:	Most pre 2012 Chromebooks are probably compatible, but most post 2012 Chromebooks use the incompatible OMTP standard.
Question:	Can i use standard crimpers that compress the load bar or will it crush the connector? like this: https://www.amazon.com/gp/product/b076mgpqzq
Answer:	Dear Customer, Yes, this work to use an external mic on iphone.

• SHIELDED METAL RJ45 connectors terminate Cat 6A, Cat 7 solid or stranded conductors; Robust shield termination and strain relief allow for one-step termination process provides superior shielding and mitigates alien crosstalk
• DIY RJ45 CABLE ENDS ideal for making custom length Ethernet patch cords; Supports 23AWG round or flat wires, for wire core OD 1.35~1.45mm, AWG and OD MUST BOTH meet the requirements
• SUPERIOR TRANSMISSION meets CAT6a performance requirements per ANSI/TIA-568-B.2-10 for a Gigabit Ethernet channel compliant network. 50u" gold-plated contacts on 8P8C network connectors provide faster speed with less interference
• SOLID METAL HOUSING and gold-plated 3-prong contacts suppress alien crosstalk and provide a secure connection; Secure termination for shielded or outdoor-rated cable with an IP camera or security camera installation
• With 30 x Blue Strain Relief Boots, taking the pressure off the cable, keepingdust and water from invading the plugs. (The Ethernet cable cap compatible with cable OD 7~8mm)

User questions & answers

Question:	Will this work for 10gbe connections
Answer:	Yes you can. The 7-pin plug that comes with this model tongue jack uses the Tow vehicle's electrical protection (typically a 20a or 30a fuse), and hence it is not built in to the jack design itself. So Yes you can connect to your trailer battery, but you'll need to install a home made pig tail wired into the trailer battery. It will consist of 1: 7-pin female receptacle 2: a 30a fuse on the 12v+ side for electrical protection. This would allow you to use either the tow vehicle or the trailer battery. This is the option I prefer. Here's links to the parts you'll need : Female 7 pin trailer connector: https://www.amazon.com/CURT-58150-Vehicle-Side-Trailer-Connector/dp/B001EP0G72/ref=sr_1_4?crid=HP2P878QP1E5&keywords=7+pin+female+trailer+connector&qid=1581199279&sprefix=7+pin+femal%2Caps%2C226&sr=8-4 inline fuse holder (and you'll need a 30a blade fuse to go in the fuse holder.): https://www.amazon.com/Fastronix-Automotive-Marine-Weatherproof-Holder/dp/B01LWNVT61/ref=sr_1_6?keywords=inline+30a+fuse+waterproof&qid=1581201609&sr=8-6 You'll also want some 12 gauge wire and 10-12 Gauge Watertight Heat-Shrink Butt Connectors to build the pig tail. Typically Black or Red wire is used on the 12v+ side and white wire is used in the 12v- going to the battery. Here's a good video to watch to get an idea of how to install. (he says 10 guage wire but that is overkill - it's 14 gauge on the motor, so... that's why I say 12 gauge wire should be just fine) (also he installed a switch in his junction box, which imo is unnecessary because there is already an up/down switch on the jack already. https://www.youtube.com/watch?v=HCZ-4TGVSFQ If you never want to use the tow vehicle to raise/lower... they sell a less expensive model which is designed to power through the trailer battery. These models typically come with a 30a inline fuse, and/or a 30a resettable breaker (possibly both). These models often come with only 1 wire for the 12v+ and uses the trailers frame for the ground connection. The models that come with the 7 pin plugs to use the Tow vehicle have 2 wires. The 12v+ wire is typically connected to pin# 3 (tow vehicle's running lights - requires lights on in order for jack to work - often only has 20a fuse, which is not enough imo). It could also be connected to pin #4 (which is the AUX 12v+ charging circuit. I'm not sure what the fuse protection is on that... hopefully it's 30a). The ground (12v-) is usually on pin# 1. Here's a link to the 7-pin trailer wiring schematic https://i.pinimg.com/originals/fa/3b/f1/fa3bf1ae1f23192fd0d63b829905eb90.jpg Hope this helps.
Question:	Do these require a special crimp tool? Out of 30 pieces I've only have been able to get 1 to work. My standard connectors work fine
Answer:	They didn’t work for me. Buy Apple brand it will work and isn’t that much more expensive-$9.00 vrs 5.50.
Question:	Can these be used with cat6 shielded ftp outdoor 23awg cable? The cable im looking to buy people say is kind of think
Answer:	first, you can run voice over an rj45. you don't have to use rj11jacks. a 4a pair cable contains 8 wires. the jacks are color coded for both 468B (most common setup) and 468A (less commonly used) the blue white (Tip) blue (ring) and brown white (tip) Brown (ring) are in the same place regardless of being 468B and 468 A.the orange pairs and the green pairs are installed on the jack based on the confguration required. again 468B is the most common configuration. note: the blue pairs is all you need for single line device. the green and orange pairs are required for data. also there are no black white wires on a 4 pair cable or in any other data or voice cable.
Question:	Any hints for 26 AWG to keep from moving with in the load bar and getting out of order wires
Answer:	Yes this will work just fine for flat (also known as ribbon) cables.

Product features

VCE Shielded RJ45 Cat6A/Cat7 Connector With Strain Relief Boot

• VCE Shielded Cat 6A / Cat 7 Modular Plug is designed for sensitive or harsh environments that are required security with protection against electromagnetic and radio frequency interference (EMI/RFI) noise and alien crosstalk.
• Secure termination for shielded or outdoor-rated cable with an IP camera or security camera installation.

CAT6A & CAT7 Shielded Termination Solution

• High-performance shielded housing for Cat6A / Cat7.
• 3 Prong blade ensures closer combined between the contacts and the wire core than 2 prong blade.

STP & FTP & UTP Cable Compatible

• Supports shielded and unshielded cable.
• Supports 23AWG solid or stranded cable,for wire core OD 1.35~1.45mm, AWG and OD MUST BOTH meet the requirements.

Important Note: It is NOT pass through connector

• We also have cat6 shielded pass through connectors(B087Q7QVKV), please choose the correct connectors.

High Quality Construction

• Strong mating clip for frequent unplugging.
• Nickel-plated shielded structure provide perfect protection to against interference.
• 50u" gold-plated contacts provide faster speed with less interference.

Cost-Effective 30-Pack

• Load bars for arranging wires.
• Strain relief boot protect the clip.
• The strain relief boots compatible with cable OD 7~8mm.

What You Get

• 30 x VCE cat6a/cat7 shielded rj45 modular plugs,load bars, and blue strain relief boots.
• 1 × Quick Installation Guide
• You can get replacement for free if quality problem.

• FULL METAL JACKET RJ45 field plug for Cat 8 channel network switch and server connections; Modular plugs with robust die-cast housing provides superior shielding and mitigates alien crosstalk on a Cat 8 Ethernet cable; Supports 22 AWG to 24 AWG shielded Cat8 wire with an outside diameter between 7.0 and 8.5mm; Backwards compatible as Cat 6A, or Cat 7 connector
• CAT8 PERFORMANCE for a 10GBASE-T, 25GBASE-T or even a 40GBASE-T channel compliant network up to 30 meters; GHMT Cat 8 channel performance verified; Fully backwards compatible with Cat 6 (Cat6), Cat 6A (Cat6A), Cat 7 (Cat7A) Ethernet networks
• IMPACT TOOL FREE RJ45 CONNECTOR with an open hinged design simplifies placement and termination of bulky shielded cable; IDC modules can be wired for T568A or T568B wiring with a color-coded pass through termination cap
• SUPERIOR CONSTRUCTION combines a one piece metal housing with an integrated silencing cylinder to suppress EMI, NEXT, and AXT electromagnetic noise and crosstalk; A screw-on metal strain-relief boot protects the cable integrity and increases the shielding performance; An IP20 rated dust cover protects the RJ45 contacts when transporting or storing a terminated cable
• PoE PLUS COMPLIANT for IEEE 802.3at Power over Ethernet (PoE+) applications; Terminate a Cat8 Ethernet cable with support for Cat 8 auto-negotiation in a mixed network with variable data transfer speeds to a 1 GB switch, 10 GB switch or 40 GB switch

User questions & answers

Question:	Do you happen to sell packs of 2 or
Answer:	Hello dear friend, the product is still in warranty, please contact us via Amazon message with your order, we will provide so lution asap. Thank you.
Question:	Are the connectors reusable? If so how many times can they be reused reliably
Answer:	Yes. No problem
Question:	Where are these plugs made
Answer:	Is your vehicle a GM? There is a spot in the fuse panel that does not come w/ a 30amp fuse cartridge from the factory. It powers the 12v pos. to the 7 way trailer plug. Install it and your set.
Question:	Will tis type field terminator handle 1000 MHz cable
Answer:	Yes there’s a button separate.

Product features

Complete Shielded Cable Solution

1. Rugged metal housing for long life
2. Integrated silencing cylinder reduces EMI/RFI
3. Screw-on metal strain-relief boot supports cable weight
4. IP20 rated RJ45 dust cover protects contacts
5. Feed-through cap with T568A & T568B color codes
6. Copper foil tape increases shielding

Secure Metal Housing

• Supports IEEE 802.3at PoE+ (Power over Ethernet Plus)
• Connect to an IP security camera or wireless access point

Network Category Compatibility

• Shielded Cat 6A
• Shielded Cat 7/7A
• Shielded Cat 8

Outside Diameter Compatibility

• Accommodates a wide range of shielded Ethernet cables from 22 to 26 AWG up to 8.5mm

Product description

Cable Crimper:

- It will not damage the shelled-wire and work conveniently with high efficiency

- While using press-pliers, just insert the modular plug into its position and press it - Suitable for Cat5 and Cat5e cable

Cable Tester:

- Test RJ45 and RJ11 network cable

- Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and ground

- Can judge wrong connection, short circuit and open circuit

- Put cables into both master tester and remote tester

- The lights of the main tester will turn on sequentially from 1 to G

- Detachable remote tester, test remote cable up to 1000 ft. in length

- Power supply: DC 9V battery (Included)

Mini Cable Cutter Stripper Tool(Yellow)

-Handy Small Tool for light use,When connecting network or telephone cable into face plates and network modules,the punch down tool makes it much easier. It pushes in the wire without any difficulty. it can also cut/strip wires.

Package Includes:

1* network cable tester

1* crimper tool

1* 9V battery

50* standard RJ45 Cat5e Cat6 connectors

10* case covers for RJ-45 connectors

1* RJ45 internet straight through coupler

1* yellow mini stripping knife.

• 1, 7 in 1 professional network computer repair tools in one set, suitable for your Ethernet LAN network maintenance and repaired.
• 2, Tool set Includes network cable tester, 3 in 1 crimper tool, 9V battery, 50pcs standard RJ45 Cat5e Cat6 connectors, 10pcs case covers for RJ-45 connectors, RJ45 internet straight through coupler, yellow mini stripping knife.
• 3, Networking cable tester: tests twisted-pair straight & crossover cables: RJ-45 & RJ-11, tester detects if wires are connected correctly. 3 in 1 crimper tool won't damage the shelled-wire and works efficiently.
• 4, Premium Material: The mouth of the press pliers is made of magnetic steel, which is hard and durable. Gold plated leads for better data transmitting and higher signal strength.
• 5, Specially designed to work with RJ45 Network Cable Cat5, Cat5E, Cat6, Cat6E, Cat7. Portable: lightweight,easy to carry.

User questions & answers

Question:	Does the crimper crimp standard 4 pin phone connectors? I don't really care for the 6 pin
Answer:	Yes. Your iPhone 12 mini, max and pro models utilize a Lightning connection. This 2Pack Lightning to 3.5mm Headphone Jack & Lightning Connector will work very well with your iPhone- any iPhone that has a lightning connector only. I'd also recommend a Lightning port to 2 Lightning Port connector as well- to charge and listen on your not included headphones as well
Question:	Is this a ratcheting type crimper
Answer:	Yes, it is perfectly compatible with all lightning interface devices, including: iphone 12/12 pro/12 pro max/11/11 pro/8/7/SE/X/XR/XS ipad ipod.

• Usage: UGREEN RJ45 Coupler extender is ideal for extending ethernet connection by connecting 2 short network cables together.
• Fast speed to 10 gigabite: The RJ45 connector can speed up to 10 gigabite for connecting Cat7/Cat6 ethernet cable.
• Safe and secure: With nickel plated contacts and easy snap-in retaining clip, the coupler ensure a secure and corrosion free connection.
• Compatibility: This 8P8C female to female Ethernet coupler jack is compatible with Cat7, Cat6 Cat5e, Cat5 network.
• High performance: RJ45 inline jack coupler meets Category 6 performance in compliance with the TIA/EIA 568-C.2 standard. It is RoHS compliant.

User questions & answers

Question:	Can this work in cat
Answer:	YES. Maximum OD8.5mm
Question:	Can i use cat 5e on one end and cat 6/ 7 on other end
Answer:	Yes a regular rj45 crimp tool and a pair of plyers for the strain relief
Question:	Front page ad says "ugreen 5pack cat6 rj45 8p8c network jack in-line coupler female to female" but when you scroll down it says 2pc...hmm which is it
Answer:	This question has already been answered elsewhere on the Internet.
Question:	Will the power in a POE cable transfer through this
Answer:	This is iPhone/iPad Headphone Adapter & Splitter.For iPhone, iPad and iPod touch jacks, iOS 10.3 or later is supported

Product features

Stable Connection

Compatible with all kinds of networks both home and industrial. Snap with all kinds of RJ45 connections (cat7, cat6, cat5, cat5e).

Pure copper plated tentacles

Pure copper plated tentacles ensure strong signal transmission and high-speed performance.

ABS material

UGREEN RJ45 coupler is made of high quality ABS material, flame retardant and stable.

• Shielded RJ45 Modular Plugs make quality termination easy and fast with CAT6, CAT6A, and CAT7 solid and stranded round wire cables
• The modular plugs accept 23 to 26 AWG shielded or unshielded cable. The insulated conductor outside diameter need to be less than or equal to 1.5 mm
• Quality Made: Plug Housing is made of flame retardant eco-friendly LG PC material, with the copper casing under plated with gold which assure that each crimping without fail. The load bar is best for installation with passing through conductors. The tail clamp protected support barrel evenly crimped and firm around the cable
• High-performance shielded housing and the thick gold-plated three-prongs gold-plated contacts ensure fast data transfer speed, reduce pair to pair alien crosstalk, and greatly improve noise immunity at all frequencies
• Package: 10 × STP 50u Gold Plated RJ45 Modular Connectors Service: We offer 30 days free refund and lifetime customer service

User questions & answers

Question:	Does the 100 pack include 50 connectors + 50 load bars or is it 100 connectors with load bars
Answer:	This are for Cat7 and Cat6A.

Product description

Mediabridge Cat7 Connector These Cat7 Connectors (also known as crimp connectors) are ideal for safely & securely applying shielded plugs to your high-speed Ethernet cables. Each RJ45 connector is specifically designed for solid or stranded Cat7 round cable termination. Strong plastic builds make each connector perfect long-lasting network maintenance. Mediabridge Cat7 Connectors are built with 8P8C STP shielding, which blocks unwanted EMI (Electromagnetic Interference) far better than competitor's unshielded connectors.Product Features- MULTI-PACK: Includes 30 connectors, Great For Applying A Shielded RJ45 Connector To Your Cat7 Ethernet Cables- SHIELDED DATA TRANSFER: 8P8C STP Shielding Achieves Better Data Transmission & Higher Signal Strength Than Many Competitors With Unshielded Connectors- SOLID OR STRANDED: Specifically Designed For Solid Or Stranded Cat7 Cable Termination- PRO GRADE RJ45: Corrosion-Resistant 50 Micron Gold-Plated Contacts, Meets Or Exceeds Category 7 Performance In Compliance With The TIA/EIA 568B.2 Standard- DURABLE: Strong Plastic Builds Provide Long-Term Performance For Your Ethernet CablesCompatibilityMediabridge Cat7 Ethernet Cables, including 250FT, 500FT, & 1000FT, as well as other standard Cat7 (solid or stranded) with OD up to 7.7mmNotes Network speed is determined by factors other than just connectors & cables, like a router/switch box. The speed of the network can only be as fast as the slowest componentWarrantyLimited 1 Year Warranty.

• MULTI-PACK: Includes 30 connectors, Great For Applying A Shielded RJ45 Connector To Your Cat7 Ethernet Cable
• SHIELDED DATA TRANSFER: 8P8C STP Shielding Achieves Better Data Transmission & Higher Signal Strength Than Many Competitors With Unshielded Connectors
• SOLID OR STRANDED: Specifically Designed For Solid Or Stranded Cat7 Cable Termination
• PRO GRADE RJ45: Corrosion-Resistant 50 Micron Gold-Plated Contacts, Meets Or Exceeds Category 7 Performance In Compliance With The TIA/EIA 568B.2 Standard
• DURABLE: Strong Plastic Builds Provide Long-Term Performance For Your Ethernet Cables

User questions & answers

Question:	Can these rj45 connectors be used with cat 7a solid copper cable
Answer:	This is the crimping tool I use, Platinum Tools 90170 10Gig Termination Kit Box. It was a little pricey but it works great with the Media Bridge Cat 7 wire. Be sure to line the insert up correctly with the inside of the connector. ( I had some frustration with that at first) One other thing I had happen, was some new ends that were partially crimped. Be sure the gold tabs are all the same height.
Question:	What is the rated Mhz for these connectors
Answer:	Not sure. I've been using them with augmented CAT 6A shielded cable which I would consider "thick", and they work just fine. Make sure you get the boots with the order to keep out water and dirt though. Also you'll need a crimping tool that can handle CAT 6 shielded terminators.
Question:	Does this fit in regular RJ45 Jack
Answer:	It is very much a pain. I did my entire house in shielded cat 6, and I probably had to do everyone 2 or 3 times. That being said I am not the best to give advise, but my recommendation would be to (1) get the wire unkinked by pulling the wire over your thumb and index finger in two or three different directions. (2) Cutting the wire even with side cutters after the bar is on. (3) slide the bar back out to the end, leaving about an 1/8" still out from the bar. (4) Pray! Sorry I don't have an easy answer.
Question:	What crimper tool are you guys using to successfully terminate these connectors on the Mediabridge cat7 cable
Answer:	Yes. i have tested them. Platinum Tools 100054C ez crimper , and Klein Tools VDV226-110 have been tested and are recommended.

• Cat7/CAT6A Class Ea RJ45 Field Assembly Plug, Shielded. Supports Power over Ethernet (PoE, PoE plus, and UPoE).
• Wire Connection: Supports 23AWG solid or stranded wires, wire diameter from 0.46 to 0.76 mm
• Metal shielded shell, durable and corrosion resistant, providing more reliable connection. Suitable for RJ45 interface devices, applied to LAN work area, data communication , integrated wiring and etc.
• Terminate in field in minutes without special tools Wire Connection can be used repeatedly, A simple and cheap solution for you.
• PACKAGE CONTENTS:5 Pieces per plastic bag.

User questions & answers

Question:	Do you need any special tools for this
Answer:	The specifications for this connector indicate that it will handle up to 2000MHz. Obviously it will only achieve that specification if hooked up to a category 8 certified wire. Haven’t tested that spec in real life but I can definitely say these are high quality connectors that are super easy to install and I have had no problems using them to send hdmi signal in an HDBT system.
Question:	Are there 5 rj45 connectors or does each connector/bag contain 5 pieces per single rj45 Jack
Answer:	This cat7/cat6a modular plug what we can guarantee is that it can reach the 10gb speed from one head to the end head. However,the final effect will effected by the length of ethernet cable or quality,etc.

Product features

Specification

• Operation temperature: -40°C to 60°C
• Relative humidity: 85%(30°C)
• Air pressure: 70-106Kpa
• Gold Plated Phosphor Bronze Blade: phosphor bronze and gold plating, mating durability not less than 750 cycles
• Anti-burn performance: product made from Kirsite \ PC or PCB, meeting the international standard
• Intermediate resistance: no more than 20m ohm in normal atmosphere pressure(not including bulk resistor)

Wide Compatibility

• Connects with ANY RJ45 network device

Tool-Free Design

• Tool-free design, easy to install directly

Metal shield

• Shielding your network prevents signal loss and electromagnetic EMI/RFI interference and maintains a proper ground connection

• Metal gold-plated connector, great conduction performance, ensures the optimal signal transmission effect.
• Uses the high-grade transparent crystal head shell, environment friendly, beautiful and abrasion resistant, can extremely prolong the using life.
• Uses the Tail Clamp, which can better firm the network cable, ensure the stability of the high standard network signal transmission.
• 50μ" gold plated terminal, which is oxidation resisting, ageing-resistant, ultra-low impedance, and has better ability of conduction.
• 2-piece design makes installation more easier. We have another size of cat7 plug connector.

User questions & answers

Question:	Can you use this with stranded cat7 cable
Answer:	RESPONSE FROM MANUFACTURER-CABLE MATTERS: Yes, these Cat8 Connectors are reusable, with Min. 20 installation cycles. Please feel free to let us know if you have any further questions by contacting us through Amazon's messaging center. Open the product page, click on "Sold by Cable Matters" and then "Ask a Question”. Cable Matters Support Team
Question:	Does this connector work on 28AWG small cat6a cable
Answer:	Cable matters

Product features

Structure Inside (Standard 8P8C)

1. Crossover Cable: 568A to 568B
2. Straight-Through Cable: 568B to 568B

2-Piece Design

2-piece design makes installation more easier. Plug shrapnel is solid and tough, will not break easily.

Cat7 RJ45 Connectors

• Type: RJ45 8 position and 8 contacts head, 8P8C RJ45 head Connector Plug.
• Color: Silver with transparent
• Quantity: 50pcs/pack

Durable Housing

• Nickel-plated iron material, the internal structure is well protected.
• RJ45 Modular Plug Network Connector for FTP/UTP Cat7, Cat6, Cat5E, Cat5.

24K 50μ" Gold Plated Leads

Durable oxygen-free copper, ensure better data and signa transmitting.

• CAT7 RJ45 Connectors made by high-performance shielded housing and the thick gold-plated three-prongs gold-plated contacts ensure fast data transfer speed, reduce pair to pair alien crosstalk, and greatly improve noise immunity at all frequencies.
• Plug Housing is made of flame retardant eco-friendly PC material, with the copper casing with nickle-plated which assure that each crimping without fail. The load bar is best for installation with passing through conductors. The tail clamp protected support barrel evenly crimped and firm around the cable.
• The Rj 45 modular plugs accept 23 to 26 AWG shielded or unshielded cable. The insulated conductor outside diameter need to be less than or equal to 1.45 mm.
• The Rj45 network connectors suitable for CAT7 cables and support POE; Used for CCTV, Routers, Switches, Printers, Hubs, PC, and Servers.
• Package includes 50 pieces Cat7 RJ45 Modular Connectors + 50 pieces strail relief hood. Service: We offer 30 days free refund and lifetime customer service

User questions & answers

Question:	Can this connector be properly terminated with a klein tools vdv226-110 pas-thru crimper
Answer:	No it is not.
Question:	What AWG range does this connector allow
Answer:	RESPONSE FROM MANUFACTURER-CABLE MATTERS: Currently, only 6-pack is available. Please feel free to let us know if you have any further questions by contacting us through Amazon's messaging center. Open the product page, click on "Sold by Cable Matters" and then "Ask a Question”. Cable Matters Support Team

Product features

CAT7 Metal Shielded RJ45 Connectors

1. Color: Silver with transparent
2. The cable hole: 1.45mm
3. Main item size: 3.6 * 1.5 * 1.2cm / 1.42 * 0.59 * 0.47in

Product Features:

Plug Housing is made of flame retardant LG PC material, with the copper casing under plated with gold which assure that each crimping without fail. The load bar is best for installation with passing through conductors. The tail clamp protected support barrel evenly crimped and firm around the cable.

Convenient

High-performance shielded housing and the thick gold-plated three-prongs gold-plated contacts ensure fast data transfer speed, reduce pair to pair alien crosstalk, and greatly improve noise immunity at all frequencies.

Structure Inside (Standard 8P8C)

Compatible to both T568A and T568B wiring schemes.

Wide Application

Apply to Switch, Wireless Device, Modem, Hub, ADSL, PC, TV, Digital Device.

Product description

Brand Guarantee

CableCreation Focus to the Ideal Design of All of Our Quality Cables

CableCreation is not Only a Brand But Also a Creative Team With Own Factory manufacturing

CableCreation is Confident to Offer All Buyers with Items Lifetime Warranty

Specifications

- RJ45 Female with gold-plated contacts

- Category Rating: Cat 7

- Compatible with standard cable

- For OD 8.0mm or standard lan cable, include hood connector

Package include

10 x RJ45 Modular Plug

• 10 pcs Rj45 plugs for standard lan cable, three point staggered contacts ensure the stable signal performance
• Gold-plated contacts provides reliable performance for a Gigabit Ethernet rated network
• Save money by using these connectors to create your own patch cables
• ROHS compliant, and the color is Transparent, allow indicator light penetration better
• Easy for Carry, Gold plated connectors resist corrosion

User questions & answers

Question:	Will this work flat Cat7 cables
Answer:	Hi friend, Yes, you could use cat 5e on one end and cat 6/ 7 on another end of this RJ45 coupler. Thanks for your inquiry and support.
Question:	Does it work with cat.7? real Cat7 due to the fact that is required 1.5mm per each 8 wire in rj45 connector
Answer:	You have the choice of 1, 2, 5, or 10. I ordered the 5 pack and received 5. Because they are all the same item, just in different quantities, the review and Q&A page are the same, so you may get different answers, depending on what each person ordered.
Question:	Will these work with 22AWG cables
Answer:	>> I guess it should work, since power travels through the same wires as data. Not necessarily. Power wire size requirements are generally much higher than data requirements. For example, my house has electric shades and drapes. They are connected together with a 4 conductor cable. The 2 data wires are 22 gauge, the 2 power wires are 16 gauge.
Question:	What crimper would you recommend for this connectors
Answer:	Yes it will. It has 3 crimp settings. 6,8,and 4

Product description

1. Maximum Speed of Data Transmission:

Each shielding of Cat8 is made of best material. Compared with other Ethernet cable the additional shielding of Cat8 reduces the signal interference of crosstalk, noise, and other interference that degrades the signal quality. Give you THE BEST network connection and rapid data transmission ever.

2. Best Choice for High Performance Network:

Cat8 Ethernet cable is designed for high performance network, such as, server applications, cloud computing, data centers, and other high performance computer networking application. Perfect to connect your gaming devices, Xbox, Network adapters, Hubs, Switches, Routers, DSL/Cable Modems and Patch Panels. Cat8 is your best choice for smart home & office.

 3. Outdoor Rated & Heavy Duty Cat8 Ethernet Cable:

Quadruple shielded Cat8 with upgraded UV-resistant PVC can withstand extreme weather yet working efficiently. It also can be buried directly under the ground. It’s perfect for outdoor & indoor use

• 【Heavy duty & Direct Burial】The quadruple shielded Cat8 Ethernet cable is super efficient in reducing EMI/RFI Interference and provide highest fidelity for long distance data transmission. With upgraded PVC, Cat8 is waterproofed & anti-corrosion and more durable & flexible for heavy duty work. Can be buried directly under the ground. Suitable for both outdoor and indoor use.
• 【Gigbit Ethernet Cable】：Cat8 Ethernet cable is made of 4 shielded foiled twisted pair(S/FTP) and 26AWG single strand OFC wires which supports bandwidth up to 2000MHz and boosts the speed of data transmission up to 40Gbps. With the additional shielding and the improved quality in twisting of the pairs, Cat8 can reduce any signal interference to the full extent. Allow you to stream HD videos, music, surf the net, play games at Hyper Speed.
•  【Fluke tested & Certified Quality】：All IMONTA Cat8 cables are tested with Fluke professional Cable Analyzers. All cables are individually certified under strict industrial standards (TIA 10G Patch Cord or Channel) with Fluke testers. Factors for certification include near end cross talk, return loss, prorogation delay, skew delay and more.
• 【Widely Used & RJ45 Connectors】：With two shielded RJ45 connectors at both ends, the Cat8 Ethernet cable works perfectly with networking switch, IP Cam, routers, Nintendo switch, ADSL, Adapters, Modem, PS3, PS4, X-box, Patch panel, Servers, Networking Printers, Netgear, TP-link, NAS, VoIP phones, laptop, Coupler, Hubs, Keystone jack, Smart TV, Imac and other device with RJ45 connectors. Also compatible with Cat7/Cat5/Cat5e/Cat6/Cat6e.
• 【Weatherproof & UV Resistant】: Shielded with high quality UV-resistant PVC jacket, the outdoor rated Cat8 Ethernet cable is anti-aging. It can withstand direct sunlight and extreme cold & humid & hot weather yet still working efficiently. Premium design with great quality. 18 months warranty with lifetime welcoming customer service.

User questions & answers

Question:	Does this have to plug into the router or can it plug into a Wifi extender
Answer:	Yes
Question:	How many mbps
Answer:	Kline RJ45 crimping tool, but you have to remove the rear crimping arm that smashes the rear of the RJ45 connector. There may be a better solution but this works perfectly fine.
Question:	What size hole will I need to drill
Answer:	Hello there, The 100 Pack includes 100 pcs RJ45 connectors and 100 pcs load bars. :)
Question:	Is there really a thing called cat 8 Ethernet
Answer:	I haven’t tried them with Cat 8. My system is mostly Cat 6 with some Cat 7. These couplers work fine so far here.

Product features

Fluke Pass-Keeping your smart world up and running.

Fluke- loss and bandwith -Pass!

UV Resistant ,Weather Proof

7*24hr Working.

Enroll New Tech Life

Now you can upgrade your ethernet cable and CA8 can stay ahead and work well with all your smart devices.