14 best power capacitor car audio
A power capacitor in car audio, often referred to as a car audio capacitor or simply a car audio cap, is an electrical component used in car audio systems to provide an extra surge of power when needed. Here's what you need to know about power capacitors in car audio systems:
Purpose:
- The primary purpose of a power capacitor is to store and discharge electrical energy quickly. In car audio systems, this is essential for handling sudden power demands, such as bass-heavy music or heavy amplifier usage. It can help prevent voltage drops in the electrical system, which can cause lights to dim and audio performance to suffer.
Installation:
- Power capacitors are typically installed near the car amplifier in the audio system. They are connected in parallel with the amplifier and the vehicle's electrical system.
- The capacitor stores electrical energy when the car's alternator is producing more power than the audio system is consuming. When the demand for power spikes, such as during heavy bass notes, the capacitor can discharge its stored energy to supplement the power supply, reducing the strain on the vehicle's electrical system.
Benefits:
- The main benefit of a power capacitor in a car audio system is improved sound quality. By providing a stable and consistent power supply to the amplifier, it can help prevent distortion and maintain audio clarity, especially during demanding audio passages.
- Power capacitors can also protect the vehicle's alternator and battery by reducing the load on these components. This can lead to a longer lifespan for the electrical system.
Size and Capacity:
- Power capacitors come in various sizes and capacitance ratings, typically measured in farads (F). The choice of capacitor size depends on the power requirements of the audio system and the expected power demands.
- Larger capacitors with higher farad ratings are capable of storing more energy and are suitable for high-powered audio systems.
Charging and Discharging:
- Power capacitors need to be charged before they can provide assistance to the amplifier. This is done by the vehicle's alternator when it is producing surplus power.
- The capacitor can discharge its stored energy quickly when needed, helping to stabilize the voltage and maintain audio performance.
Considerations:
- While power capacitors can be beneficial in certain car audio setups, they are not always necessary.Modern vehicles often have robust electrical systems that can handle the power demands of typical car audio systems without voltage drops.
- If you're considering adding a power capacitor to your car audio system, it's essential to evaluate your specific setup and power requirements to determine if it will provide a noticeable improvement in performance.
In summary, a power capacitor in a car audio system can help stabilize the power supply, reduce voltage drops, and enhance audio quality, especially in systems with high-power amplifiers. However, their necessity depends on the specific setup and power demands of your car audio system.
Below you can find our editor's choice of the best power capacitor car audio on the marketProduct description
General Features:
- SoundBox Combined Amp Kit & Capacitor Package
- Give Your System the Wires It Needs and the Capacitor It Wants
- SoundBox 2.5 Farad Digital Capacitor
- SoundBox 4 Gauge Complete Install Kit
- Authorized Internet Dealer
- 1 Year Manufacturer's Warranty
Item Specification- Capacitor:
- 2.5 Farad Digital Capacitor
- 2500 Watts Peak Power Rating
- Digital Display Readout
Item Specification- Amp Kit:
- Complete 4 Gauge Amp Install Kit
- 2300 Watts Peak Power Rating
- Heat Resistant Wire Jacket
- Premium Heat Durability In-Line AGU Fuse Holder
- Triple Shielded RCA Interconnect Cable
- Premium Grade Cables
What's Included:
- SoundBox 2.5 Farad Digital Capacitor
- 4 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet
- 4 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
- Black/White RCA Interconnect: 17 Feet
- 16 Gauge Brown/Silver Speaker Wire: 17 Feet
- 18 Gauge Blue Remote Wire: 18 Feet
- Protective Black Wire Loom
- Inline AGU Fuse Holder
- 80 Amp AGU Fuse
- Installation Accessories/ Connectors
- Terminals, Wire Ties and Wire Loom Included
User questions & answers
| Question: | If I have a Capacitor do I need a second battery |
| Answer: | No need. This is not a "fashion item", it is a reflector. It's sole purpose it to push light into the shadows, not give your set-up some sartorial elegance. |
| Question: | Does it come with speaker wire |
| Answer: | The case is 9 1/4" in diameter, but it has a "hook", so you can hang it on you belt. |
| Question: | The led doesn’t stay on is that a problem ? It reads when I first start the car but a minute later it shuts off, it is full I believe but no display |
| Answer: | I don't know the exact measurement, but it's about the size of a frisbee. |
| Question: | Is this ofc (oxygen free copper) cable |
| Answer: | they are reflectors use them on an angle |
Product description
This capacitor is perfect for your system set up if your lights are dimming due to your stereo system. The Planet Audio PCBLK2.0 is a 2 Farad capacitor that has 20 VDC rated voltage, 24 VDC surge voltage, E.S.R of 0.00195 and comes with a mounting bracket, screws, resistor and wire crimps. Help take the load off of your car battery and ensure a consistently strong bass to bump your ride!
- 3 Digit Bright Red Digital LED Voltage Display
- Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage
- Capacitance: 2,000,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate to + / - 0.1 VDC
- Working Voltage: 20 VDC, Equivalent Series Resistance: <0.00195 mW @ 120 Hz / 25°C
- Dimensions: 3 x 3 x 10.3, Unit Weight: 3.5 Lbs
- 1 Year Warranty
User questions & answers
| Question: | My equipment uses 19v dc. could i use 19v dc power supply with this supercapacitor |
| Answer: | 17 1/2 “ wide 4 1/4 “ tall 5 1/8” deep |
| Question: | Will This Capacitor stay on even when the vehicle is off |
| Answer: | I would just return the whole thing. |
| Question: | Can this capacitor be used to do spot welding after careful charging |
| Answer: | Not likely. They are very sturdy and have weighted base in each triangle. |
| Question: | how many watts can this handle |
| Answer: | 3.165 |
Product description
General Features:
- SoundBox Connected 2.5 Farad Digital Capacitor
- 2500 Watts Stabilizing Amplifier Flow Capacity
- High Strength Cylindrical Aluminum Housing
- Nickel Plated Rust Resisting Post Connectors
- Soft Turn-On/Off Power Surge
- Automatic On/Off Power Sensor
- Accurate 3-Digit Voltage Display
- Bright Charging Status L.E.D.
- Notification Safety Sound Alert
- Digital Over-Voltage Protection System
- Type: Digital
- Capacitance: 2.5 Farad
- Maximum Handling: 2500W
- Digital Meter Display: Yes
- Maximum Input Wire Size: 4 Gauge
- Maximum Output Wire Size: 4 Gauge
- Authorized Internet Retailer
- 1-Year Manufacturer's Warranty
- 2.5 Farad Digital Capacitor with 2500 Watts Stabilizing Amplifier Flow Capacity
- High Strength Cylindrical Aluminum Housing
- Soft Turn-On/Off Power Surge
- Bright Charging Status L.E.D.
- Digital Over-Voltage Protection System
User questions & answers
| Question: | Does this have a remote wire input |
| Answer: | The correct size is 3 1/8" diameter. |
| Question: | will this work with 24v input |
| Answer: | The black side maybe it's a no for the white part as it's mainly used to diffuse the sun. |
| Question: | Do i have to use the negative from the battery or can I use the negative I have ran through the trunk |
| Answer: | I have the two handle, larger model. The Frame is diffused when used by itself. There is a single cover that "sandwiches" the diffused frame. This cover is reversible, providing 4 different surfaces. But whatever you choose, has only two sides. You don't have every possible combination in one second, by turning the reflector over. I think this is what you want to know...Thus, on the larger model; White on one side, turn the reflector over; Gold. This is the most popular portrait combo. Take the slipcover off, and turn inside out. Now you have Black / Silver. That's the scoops Bud! |
| Question: | I have pioneer a1686r 350w & a6996r 650w speakers, joying front unit, also want to buy a subwoofer and amp. should i get one of these caps |
| Answer: | No,It's white&gold or silver&black |
Product description
Buffer your amplifier's power source with the Audiopipe ACAP 6000 6 Farad Digital Car Audio Capacitor. This power cap will store temporary power and discharge it to stabilize voltage to the amplifier, giving you more consistent power to your subs or speakers. It features a low level input voltage of 20 volts and a high level input voltage of 24 volts. Also included is a digital display with a status indicator with a black finish. Make your system operate more efficiently and powerfully with the Audiopipe ACAP 6000 Digital Car Audio Capacitor.
User questions & answers
| Question: | Would i need another battery im running a duracell ultra battery in a 1996 saturn wagon sw2 with 4 l7 solobaric kickers 3,000 watt audiopipe amp |
| Answer: | No, the capacitor is connected in parallel with the battery close to the amp. The kit has very good instructions, fairly easy installation. Hope this helps. |
| Question: | If im running 4 2500 watt subs on two 4500 watt amps would i need two of these |
| Answer: | Yes it does |
| Question: | I have 2 4stack audio pipe 12s pushin out 2200 watts apiece with 1800 watt d class adudio pipe amp will this 6 farad maintain all that power |
| Answer: | They usually do that every now and then but it’s actually working. As long as the display never completely shuts off it should be good to bump |
| Question: | Does the compacitor come with a charger |
| Answer: | Free from Oxidation!means is Better than aluminum |
Product description
A stiffening capacitor is an extremely large value electrolytic capacitor. Capacitors have the ability (capacity) to store a charge on their "plates". The larger the capacitance, measured in units of Farad, the greater the charge a capacitor can store for a given voltage. Most automotive capacitors can store a charge at 10 to 20 volts and are rated from about .5 Farad up to 50.0 Farad or even more. Capacitors have an extremely low internal resistance to current flow, much lower than that of a battery. Capacitors can therefore charge and discharge power much faster than a battery can.
Wherever you're on the road with ATV, motorcycle, snowmobile and any vehicle, IT is extremely reliable and long last Stiffening Power Capacitor you can rely on.
Let’s see some technical specifications:
***2.5 Farad Capacitor***
Digital Red 3 Digit Voltage Display
Chrome Plated Battery Post
Lightning LED
***Amp Kit***
High Quality Thick 17 Feet FT 8 Gauge GA Power Cable
Premium 3 Feet FT 8 Gauge GA Ground Cable / Inline AGU Fuse Holder & 40A and 60A Fuse Included!
True Sound 17 Feet FT Double Shielded RCA Cable
High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire
All Accessories / Terminal Included! Perfect for Any Installer Shop, great for Car / Truck / Motorcycle / RV / ATV
------------------------
Package Content
1x Audiobank AB-2.5 Farad Cap
1x Completed 8 Gauge Amp Kit
- 3.5 Farad Capacitor & 8 Gauge Amp Kit
- Digital Red 3 Digit Voltage Display
- Chrome Plated Battery Post Lightning LED
- Premium 3 Feet FT 8 Gauge GA Ground Cable / Inline AGU Fuse Holder & 40A and 60A Fuse Included!
- All Accessories / Terminal Included! Great for Car / Truck / Motorcycle / RV / ATV
Product description
XS Power XP950 XP Series 12V 950 Amp AGM Supplemental Battery with M6 Terminal Bolt
- Max Amps 950A
- XS BATTERY 12V
- Ah: 35, RC: 50
- 12 Volt battery with Ah: 35, RC: 50 minutes
- Absorbed Glass Mat (electrolyte is suspended in fiberglass)
- 12 Volt battery with Ah: 35, RC: 50 minutes
- Absorbed Glass Mat (electrolyte is suspended in fiberglass)
User questions & answers
| Question: | Just purchased, whats a good size fuse to run to it, or should i stick to the size the amp needs |
| Answer: | Description is accurate: “Set of 4, 18 Ounces” |
| Question: | Will this work with a Napa legend battery for starting and this to power a R.F. 1200 watt amp (1350rms power |
| Answer: | I haven't tried to scratch one of them. I've taken them to many outdoor parties and they still look like new. I like them very much and try to take care of them. |
| Question: | Can this be used as a primary battery |
| Answer: | Taiwan |
| Question: | will this battery be enough to power my 3350 watts rms system |
| Answer: | The holds 20 oz. |
Product description
General Features 2.0 Farad Power Capacitor Perfect for systems up to 2000W Red digital voltage display Audible warning indicators Includes clear mounting brackets Automatic shutoff protection 10-16 Volts DC Accepts any gauge of wire with ring terminals Dimensions: 10-1/2"L x 4-1/2"W x 3-1/2"H
- Perfect Capacitor for systems up to 2000W
- Features audible warning indicators
- Runs on 10-16 Volts DC
- Equipped with automatic shutoff protection
- Accepts any gauge of wire with ring terminals
User questions & answers
| Question: | is this for voice and bass |
| Answer: | I would opt for matching voltages to insure component will degrade at a similar pace |
| Question: | How u charge this thing |
| Answer: | No. The capacitor gets its power from the battery. If I'm not mistaken |
| Question: | I have 2 2000watt monos but at 4 ohms its 500 rms ...will this be able to handle that |
| Answer: | Ignore the "spot in the morgue". Yes, it can deliver a crazy amount of power @ 14.4V (nominal), but at 14.4V, the current has a very high resistance to flow through your body, and you'd likely not feel it unless you're sweaty and haven't bathed in a few days. Aside from that, these aren't designed for short-circuit use, so your mileage may vary. It might work great for a few welds and pop. It might work great for thousands of welds. Who knows? If you try it, do let me know, I could use a spot welder. |
| Question: | What does a capacitor do |
| Answer: | Im not too sure but i have 3000 watts on my own and it can take more so i don't know exactly how much it can handle |
Product description
Today’s car audio amplifiers need huge amounts of current. Often a vehicle’s electrical system is unable to provide it. With your car’s air conditioning running, the factory electrical charging system may already be operating at only 70% of full capacity. When a bass note hits or when playing your system very loudly, there may not be enough electrical energy to power your amplification system properly causing your music to sound strained and distorted. Rockville capacitors are designed to store enough electrical current and to release this energy extremely fast due to their superior design and low internal resistance. In addition, as quick as your amplifier needs a new current surge, your Rockville capacitor will provide it. This continuous cycle of power discharge and recharge guarantees flawless bass playback.
Features:
Rockville RXC4D 4 Farad Capacitor
4 Farad/12 Volt Stiffening Capacitor with 24 Volt Surge Capacity
Lucite Encapsulated Display and Logic Circuitry.
Red LED Digital Voltage Display.
Blue Led Flashing Charge and Discharge Metering.
IC Controlled circuitry with negative polarity built-in protection.
Unit dimensions (Inches): 10.67” L x 5.32” W x 3.54” H
Includes Clear Lucite Unbreakable Mounting Brackets, hardware and charging resistor with instructions
- Rockville RXC4D 4 Farad Capacitor
- 4 Farad/12 Volt Stiffening Capacitor with 24 Volt Surge Capacity
- Lucite Encapsulated Display and Logic Circuitry.
- Red LED Digital Voltage Display.
- Blue Led Flashing Charge and Discharge Metering.
User questions & answers
| Question: | is this for car amp noise |
| Answer: | No |
| Question: | Will this prevent my headlights from dimming I’m running a skar 1500.1 amp and 2 10” 500 rms subwoofers |
| Answer: | Yes if you put two units in series but this is a lot of AMPs if you ever shorted something |
| Question: | Recomended for 600 rms sub and 600 rms amp? Maybe another 400 rms amp for highs and mids |
| Answer: | You can use the ground connected to the amp and the same for the positive connected to the amp. You do not connect straight to battery, it needs to be as close to the amp and connected to the amp. |
| Question: | I purchased this capacitor and it came with a resistor. What is this used for |
| Answer: | You should always back up you amps with a cap it stabilizes and protects all of you cars electronics and improves quality of audio |
Product features
Rockville RXC4D
Today’s car audio amplifiers need huge amounts of current. Often a vehicle’s electrical system is unable to provide it. With your car’s air conditioning running, the factory electrical charging system may already be operating at only 70% of full capacity. When a bass note hits or when playing your system very loudly, there may not be enough electrical energy to power your amplification system properly causing your music to sound strained and distorted. Rockville capacitors are designed to store enough electrical current and to release this energy extremely fast due to their superior design and low internal resistance. In addition, as quick as your amplifier needs a new current surge, your Rockville capacitor will provide it. This continuous cycle of power discharge and recharge guarantees flawless bass playback.
Product description
Bullz Audio 8.8 Farad Capacitor With Digital Voltage Display.
- When System Voltages Drop, the Sound Quality of Your Car's Audio System Takes a Hit.
- Bullz Audio Capacitors Provide Instantaneous Power on Demand to Feed your Power Hungry Amplifiers and Stabilize the Voltage.
- This is an 8.8 Farad Capacitor with a Red Three Digit LED Display.
- Works well Up to 8800 Watts Max Power
- Low ESR
User questions & answers
| Question: | Does it come with connectors |
| Answer: | Press button on bottom to desired color or press button to automatically change colors |
| Question: | Anyone who has bought and used this capacitor, can you tell me is it worth it? I have a 1200 hifonics pushing 2 12" rockford p3's at 4 ohms |
| Answer: | Not sure if they are BPA free. So I only use them for cold beverages to be safe. I think they would hold up to the heat but I don't know what will be released into the tea... |
| Question: | Can your capacitor be more in the amp |
| Answer: | Sorry, we don't. |
| Question: | What is the max amps capacity of this capacitor |
| Answer: | Depends on where you live. We live at 8800 ft. elevation in Colorado where the air is so dry, so we never have a problem with condensation on our glasses. If you live in a humid climate, I would think it WOULD build up condensation. But I can't honestly answer that question. Sorry |
- True Spec 2.0 Farad 20V Surge Volt. Combination carbon capacitor & electrolytic capacitor
- Improves sound quality - cleaner mids and highs
- Low ESR (Equivalent Series Resistance)
- Solid brass top helps to reduce stripping
- Platinum plated. 1/0 AWG/4 AWG power inputs and 1/0 AWG/4 AWG ground inputs. Digital volt meter (blue)
Product description
Kinetik HC600 - 600 Watt 12 Volt Power Cell Battery is more powerful than 100 1 farad caps! Extreme power in a small package. Mount near your amplifier for 800 amps of power reinforcement. Easily starts a V8 engine! Engineered for high performance car audio systems, but graceful for normal driving conditions. Kinetik HC Power Cells are used in the "Worlds Loudest Vehicle" providing the power to reach over 180dB and boasts hundreds of competition victories! Due to low ESR (Equivalent Series Resistance) and high energy density, Kinetik HC Power Cells are the most powerful, reliable and compact car audio power cells on the market today. Kinetik Power Cells are used by top competitors along with car audio and video enthusiasts alike. With the rapidly growing voltage demands of todays hi-current amplifiers you will want Kinetik HC Power Cells pushing them to their limits. Kinetik Power Cell Batteries deliver higher peak amps faster and provide up to twice the life of conventional batteries. They are suspended with fiberglass mat separators, which act as absorbent sponges to deliver maintenance-free, hi-performance with a no leak design, higher cranking amps, lower self discharge and greater vibration resistance.
- 12 Volt
- 600W Max Support
- 6mm threaded terminals
- Advanced AGM Technology
User questions & answers
| Question: | I've got a 1600w rms system which can peak at 3000w+. would 2 of these batteries be enough |
| Answer: | It will help keep the lights from dimming as much, but you will want more juice than these. I've got 2 in my car on a crescendo 1500.1 and could def use a couple more. |
| Question: | hows well does it work as a lawnmower battery |
| Answer: | It will work just fine keep an eye on voltage should be 12 volts it comes already charged very strong battery for many applications i use as second battery for my car audio system and my lights no longer dimn there also rechargeable my friend |
| Question: | Can this little battery handle 2 L7 12's with A 1800 watt audiopipe amp |
| Answer: | It would take 3 600's to operate an 1800 watt amp properly. |
| Question: | hi, how many Ah / Hours is this battery? thanks |
| Answer: | Newest version is the HC600BLU is 18 Ah |
Product features
Kinetik High Current BLU Series AGM Power Cell
This Kinetik HC BLU Series 12-Volt Car Audio Power Cell features a sealed absorbed glass mat (AGM) design and is perfect for 600-watt car audio sound systems. The HC60-BLU can be used as a replacement for your vehicles standard battery or as an additional battery to provide the extra power needed for a high performance aftermarket system. It's leak-proof design and no external vents allow this power cell to fit in most factory battery locations with no hazardous leaks.
Kinetik's KHC600-BLU Power Cell puts out 600 cranking amps with a 18 amp hour rating. This battery will resist extreme heat conditions and vibrations and is 100% sealed in a reinforced ABS plastic case. Kinetik has equipped this power cell with more plates for stronger energy density and a high voltage underload. You will love the way Kinetik batteries get your system powered up and ready to go!
General Features:
Battery Features:
-12V High Current Car Audio Power Cell.
-Sealed absorbed glass mat (AGM) design.
-Can be used as a replacement for your vehicles standard battery.
-Can also be used as an additional battery to power your high-performance sound system.
-Perfect for 600W car audio stereo systems.
-Stores energy so you don't need a capacitor for your system.
-Leak-Proof, non-hazardous design.
-No external vents allow this battery to be mounted anywhere with no leaks.
-Fits in almost any factory battery location.
-Ultra low ESR.
-More plates for stronger energy density.
-Higher voltage under load.
-100% Sealed and maintenance free.
-Tightly packed cells.
-Resists extreme heat & vibrations for ultimate performance.
-Authorized Internet Dealer.
-1-year Manufacturer's warranty.
Product description
- 3 Digit Super Bright Blue Digital LED Voltage Display
- Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage.8 Farads with digital voltage display
- Voltage Measurement Accurate to + / - 0.1 VDC
- Automatic Sleep Status When Volume Is Low Or There Is No Voltage Variation Present
- Capacitance: 8,000,000, Working Voltage: 16 VDC, Surge Voltage: 24 VDC
- Equivalent Series Resistance: 0.015 Ohm @ 100 Hz / 25°C, Capacitance Tolerance: + / - 10%
- Dimensions: 9 x 6 x 2, Unit Weight: 5.3 Lbs
- 1 Year Warranty
User questions & answers
| Question: | New to this things can u use one big one to power three amps 1000 watt each amp tops or do I need to by three of these and what size |
| Answer: | I have used the crimpers with several brands of connectors, ideal RG-5, ideal RG-6 and of course the Klein. They made this kit pretty universal. Klein is the only tools I purchase, especially for their longevity. The only reason I have to buy another is because they seem to grow legs around other techs! |
| Question: | Does this model flash to the beat |
| Answer: | As far as I can tell....after doing some researching...I would have to say no. |
| Question: | Does this come with a distribution block and can it power a 4500w amp |
| Answer: | Yes. It works with dual shield and quad shield cables well. |
| Question: | what all comes with it |
| Answer: | i would call them weather resistant but not waterproof. they would get wet inside if they were submersed in water. they are a quality connector and will do fine outside in normal installations, but if you're burying them you'll want to protect them with some kind of tape or put them in conduit. |
- Perfect for systems up to 1000W
- Features audible warning indicators
- Runs on 10-16 Volts DC
- Equipped with automatic shutoff protection
- Accepts any gauge of wire with ring terminals
User questions & answers
| Question: | What is this for |
| Answer: | No it turns on n off by unit self |
| Question: | I have a problem with my system sorry if not okay to post here but my system turns off when the volume is to high would this work to help with my iss |
| Answer: | Looks from the dimensions a bit bigger than the 1Farad capacitors online, but probably closer to 3Farad than 5Farad is just a guestimate...Even a 1 Farad Cap buffers a 2x 500W subwoofer system fine on a car. |
| Question: | Can I wier in series Belva 2.0 capacitor |
| Answer: | Resistor is included to charge the capacitor, without it it is not installed correctly. All info is included with instruction manual. It is a quality piece, don't hesitate. |
| Question: | My amp is 3000 watts but the rms is only 900 watts. Would a 1 farad capasiter be enough |
| Answer: | This should do you fine. This capacitor is rated up to 3500 watts |
Product features
BB1D 1.0 Farad Capacitor with Digital Red Display
General Features
- 1.0 Farad Power Capacitor
- Perfect for systems up to 1000W
- Red digital voltage display
User questions & answers
| Question: | Do I really need this when I'm Not having voltage drops but instead amperage lack |
| Answer: | Yes you can use one big one. You can wire this in between the amps and the car battery. It will pull the power from this before getting to the battery. It doesn’t matter how many amps are hooked up. It depends on how much power you’re pulling. So just get one to match the power being pulled and this acts like a quick response team for the power needed. |
| Question: | I have a old school quantum audio qb2000d powering 2 quantum q1500/10s. 2 batts. still crazy vd and dimming lights. will this work out for me |
| Answer: | Hello, The CAP8 only flashes when it is charging. Thank you, Boss Audio |
| Question: | Capacitors are known for cleaning mids and highs in your car stereo. Does it mean this can eliminate some degree of distortion or shrill treble |
| Answer: | The capacitor doesn't come with a distribution block. The rule of thumb is to put in 1 Farad of capacitance for every 1,000 watts RMS of total system power so yeah you'll have plenty of power. |
| Question: | I need a little more I have this cap I love it but still lights flicker |
| Answer: | Hello, The CAP8 comes with a 1 Watt/51 ohm Resistor and mounting hardware. |
Product features
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
Keep your lights bright and your system bumpin'! The XCAP1F True 1.0 Farad Capacitor will deliver. It has been tested to be a true 1-farad capacitor, unlike nearly all of the competition which is really 0.2 farad to 0.8 farads. Being that it is a true 1-farad capacitor you know you're getting optimum performance. You will notice improvements in your bass response (SPL), increase the peak power of your amp, and help stabilize the voltage of your system.
The XCAP1F capacitor owes its true 1.0-farad rating to the fact that has more electrical conductors as well as a greater amount of dielectric than its competitors that claim a 1.0-farad rating. This true 1.0 rating allows it to easily handle any stereo system with up to 1200 watts of power output.
As with all NVX products, the XCAP1F true 1.0 Farad Capacitor continues the company's goals of engineering excellence and amazing prices.
Latest Reviews
View all
Browne Foodservice Peelers
- Updated: 05.02.2023
- Read reviews

Carpet Cleaning Machine For Pets
- Updated: 28.03.2023
- Read reviews

Cell Phone For Tracfones
- Updated: 11.04.2023
- Read reviews

Focal In Ears
- Updated: 25.05.2023
- Read reviews

Ph Meter Waters
- Updated: 01.02.2023
- Read reviews













