3 best camera rear views
A camera rear view system, commonly referred to as a vehicle backup camera, is an electronic device installed on vehicles to assist drivers in safely reversing their cars, trucks, or other vehicles. These systems have become increasingly popular due to their ability to enhance safety and prevent accidents, especially when backing up in tight spaces or dealing with blind spots. Here's what you should know about camera rear view systems:
Components: A typical vehicle backup camera system consists of several components:
- Camera: The primary component is a small camera usually mounted on the rear bumper or license plate frame of the vehicle. This camera captures a wide-angle view of the area behind the vehicle.
- Display: The captured video feed is displayed on a screen located in the vehicle's dashboard, often integrated into the rearview mirror or the infotainment system display.
- Wiring and Connections: Wiring connects the camera to the display, typically through the vehicle's electrical system.
Purpose: The primary purpose of a vehicle backup camera is to provide drivers with a clear view of the area directly behind the vehicle when reversing. This helps drivers avoid obstacles, pedestrians, and other vehicles that may not be visible in the rearview mirrors.
Safety Benefits: Backup cameras can significantly improve safety by reducing the risk of accidents, particularly in scenarios where drivers might not see obstacles in their blind spots. This includes situations like parallel parking, navigating crowded parking lots, or backing out of driveways.
Guidelines and Gridlines: Many backup camera systems display gridlines on the screen, helping drivers gauge distance and alignment. Some systems also offer dynamic guidelines that move as the steering wheel is turned.
Night Vision: Some advanced backup cameras have night vision capabilities, using infrared technology to provide visibility in low-light or nighttime conditions.
Audio Alerts: In addition to the visual feed, some systems also offer audible alerts, warning drivers of obstacles detected in the camera's view.
Integration: Backup camera systems are commonly integrated into newer vehicles' infotainment systems.However, aftermarket options are available for older vehicles, allowing them to be retrofitted with these systems.
Legislation: In several countries, including the United States, regulations have been enacted mandating the inclusion of backup cameras in new vehicles. These regulations are aimed at improving safety, especially for children and pedestrians.
Maintenance: Proper maintenance of the camera lens and cleaning is essential to ensure clear image quality. Dirt, debris, or moisture can obstruct the camera's view.
Limitations: While backup cameras are highly beneficial, they have limitations. They provide a limited field of view, and drivers should not solely rely on them. Mirrors and physical checks are still essential for safe backing maneuvers.
In summary, a camera rear view or vehicle backup camera system is a valuable safety feature in modern vehicles. It enhances driver visibility when reversing and helps prevent accidents by reducing blind spots. Many new vehicles come equipped with these systems, and they can also be added to older vehicles as aftermarket accessories for improved safety and peace of mind while parking and maneuvering in tight spaces.
Below you can find our editor's choice of the best camera rear views on the marketProduct description
Specifications
- Sensing area: NTSC 4.08 x 3.10mm
- Effective Pixels: NTSC 795*596 pixels
- Horizontal Resolutions: 480 TV lines
- Minimum Illumination: 0lux with IR on
- Video output: RCA connector, 1.0V p-p, 75ohm
- Power Consumption: 60mA
- Power Supply: DC12V
Purchase Notes:
1. Our Atokit license plate frame backup camera is perfect for rear view. The Monitor/LCD/Screen/Display/Radio is NOT included.
2. Easy to intall by reading the user manual, and this is a wireing car backup camera instead of the wireless.
3. This camera only supports NTSC video system, so please make sure your monitor supports NTSC video system before you buy it.
Package Contain:
1 X License Plate Frame Mount Rear View Camera
1 X 3.5ft Power Cable
1 X 20ft RCA Video Cable
1 X User Manual
Installation Notes:
*During installation, please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly.
*The RED wire end is positive, while the BLACK one is negative. And connect the RCA output end to the car monitor.
*The camera switch is controlled by the reverse gear shift.
*Please take care of the sealing to prevent water leakage when installation.
*ONLY the generic suitable tool can be helpful for you to release the set screw on the camera and adjust the camera up and down for desired view angle.
*When connecting this car backup camera to a FACTORY RADIO, a suited Harness & Programmer(not included because different RADIO need a different Harness & Programmer) will help you complete installation more efficiently.
*You can apply electrical tape for the joint of the red power wires and RCA wires, and use zip ties to fasten the wire on your vehicle.
- HEAVY-DUTY LICENSE PLATE FRAME BACKUP CAMERA: Perfect for all vehicles that us a standard US license plate, holds your car backup driving security. Not only it can offer the protection for license plate but also offer the stylish look
- IP67 WATERPROOF &SHOCKPROOF: High waterproof level, reverse camera would never be fogged or wet even in storm or bad rainy day. Plus, professional shockproof design, the safety & security assist camera does work for your vehicle all the time
- 170° WIDELY VIEWING ANGLE: To work perfectly, the viewing angle macro lens with mirror image give you a wide viewing horizon. License plate camera built high sensitive color CMOS image sensor to eliminates all the blind spots behind the car
- UPGRADE VERSION VEHICLE CAMERA: Hi-definition color pictures, sensitive real time and continuous, with the help of wired universal car reversing camera, you won’t be disturbed when you reverse your car even in adverse environment
- NIGHT VISION BETTER THAN IR LIGHTS: With 8 white LEDs, night vision reversing camera provides you realistic and comfortable images for night time or dark space backing up than other infrared camera
User questions & answers
Question: | Is this rated ip-67 or ip-68? there's a big difference between the two |
Answer: | it is rated IP67, I installed it on my BMW and I love it. it is very clear and works fine in all weather conditions Very hot or very cold |
Question: | Is it compatible with Mercedes ML |
Answer: | Hi friend, Yes, compatible with Mercedes ML350 2007, standard RcA interface |
Question: | Will this camera hook up to a CD player with a 7" display |
Answer: | If it has camera capabilities yes I have it on my pioneer hooked to a swatch so I can turn it on and off when I want to so I can see my trailer while towing not just backing up |
Question: | When this is connected to camera ready Sony Radio with display, will it turn on automatically when vehicle is put in reverse or do you do it manually |
Answer: | No, it does it automatically if connected correctly, the video is outstanding. Keep the lens wipe off and you will love the resolution. I do recommend putting something in the two holes on the back to seal out water and also the wires maybe small. I had to buy a spool of Red and Black Auto power wire to make the connection, but over all this camera is very good I have no issues at all. |
- Backup camera with IP69K waterproof IP rate.It designed with fully sealed glue filling craft, so it waterproof function is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a factory radio/screen.
- Rear view camera with a latest HD 600TVL 1/2.7inch image sensor and 170 degree super wide viewing angle lens, that's great for you to check the invisible blind spot clearly and make parking safe and simple.
- Reverse camera housing is metal,small size and OEM style design. Also it is built in multifunctional switching loops function,you can switch it to be front view, also support guide line on/off switching and cut the purple loop to choose a vertical down-ward view from like a tailgate down view(tailgate mounting).
- Backup camera can fit most types of DC 12-24V different length vehicles. Such as Cars, Pickup Trucks, SUVs, Vans, RVs, etc. It with great night vision (low illumination level: 0.01Lux).
- Customer satisfaction is our top priority. NATIKA offer 30 days money back guarantee,24 months replacement warranty,lifetime support guarantee and 7 days-24 hours professional customer service and technical support.
User questions & answers
Question: | Will they work in a high side mount on a van to look down, rather than straight out |
Answer: | Yes,it can work very well in a high side mount on a VAN or RV to look down,such as FORD Transit,RAM PROMASTER,Mercedes Sprinter,GM Express,GM Express & Chevy Savana,VW Crafter,FIAT Ducato,Peugeot Boxer, Citroen Jumper,NV Passenger and Cargo,Renault Master,Nissan NV400,Opel Movano,Opel Vivaro,Renault Trafic,IVECO Daily,VW Caddy,VW T5/T6, Nissan NV200 and Renault Trafic,Combo,Vauxhall Vivaro |
Question: | What is the low temperature tolerance on this rear view camera? I just had a different brand rear view camera die when Winter coming |
Answer: | Our NATIKA rear view camera WD-011 built-in wide range temperature electronic parts and components, the range is from -22℉ to +185℉(-30℃ to +85℃), so it is great weatherproof and can work perfectly not only in the high temperature summer but also in cold winter or snowy weather, also outlasts harsh weather like thunderstorms, rain and more, in short it can adapt to all kinds of bad weather. |
Question: | Does this reverse camera can fit honda 2010 civic and 2014 crv |
Answer: | Yes,this NATIKA reverse camera WD-011 can fit most of Honda vehicle,such as Civic,CR-V,Accord,Pilot,Odyssey, Ridgeline and also fit most of Toyota vehicle,such as Camry SE,Camry XLE,Corolla,Rav4,Prius,Prius Plug-In,Prius Sedan,Highlander,Scion,Matrix,Sienna,Tacoma and Tundra. |
Question: | I have one 2010 and one 2013 F150 pickup trucks, does this backup camera can fit both of them well |
Answer: | Please cut the small purple loop to choose a vertical down-ward view from like a tailgate down view(tailgate mounting) if you use it for Ford F150/F250/F350/F450/F550,Chevrolet Silverado 1500/2500/3500,Dodge Ram 1500/2500/3500,Chevrolet Colorado,GMC Sierra 1500/2500HD/3500HD,Toyota Tacoma/Tundra,Nissan Frontier/Titan and Honda Ridgeline,because have to choose a tailgate mouting for these pickup trucks to get a best view angle. |
Product features
Small Size Metal Housing and Mini 4PIN Connector:
NATIKA rear view camera WD-011 with small size:1.06*1.06*0.827 inch and solid materials A grade zinc alloy housing.Smaller 4PIN connector for convenient installation, Ours is 5MM/0.197in,the most of others are 12MM/0.473in. 7MM/0.276in difference!
High Resolution and Great Night Vision:
NATIKA reverse camera WD-011 built-in the latest 1/2.7inches high sensitive CMOS and Digital high-definition image processor, it is maximum Pixels 1280*720, and effective 960*576 pixels at 25 fps,also with grade A 6G All-glass,F1.8 large aperture lens,delivers great sharp and clear image in day and night. The TVL of WD-011 is up to 900TVL. For the different output format, the rear view camera WD-011 output is 600TVL, but it is much more clear than the other brand cameras whose original resolution is 420TVL,480TVL and 520TVL. It support great night vision function,the minimum illumination is 0.01Lux,will give you a clear view at night!
Super Wide View Angle:
NATIKA reverse camera WD-011 built-in a Grade A 6G All-glass and F1.8 large aperture lens, the lens' horizontal angle is 145 degrees(visible range up to 95%), thanks to the 145° horizontal view field, you'll be able to see far more than you could in the rear view mirrors alone. It helps you to decrease blind zone accidents very well.
Adjustable View Angle:
NATIKA rear view camera WD-011 with 3pcs different size gaskets/shims,when you need to adjust the view angle,please choose one suitable size gasket.Different mounting height have different view angle,after your installation, please check if the view angle is great,if not good,please choose a suitable size gasket/shim to solve it.
Easy Installation:
1.Find a a flat surface(parallel or perpendicular to ground) for mounting camera,then secure the nuts and bolts in place.
2.Connect the power wire of backup camera to the power of reversing light.
3.Connect the 26ft extension wire of backup camera to the head unit of vehicle.
NOTE:
1).Please test the backup camera before routing 26ft extension wire from back to front.
2).If your head unit without A trigger wire, then no need to use B trigger wire
4.Start the vehicle and gear on reverse to test the camera.
5.Re-install the head unit.
- How many times have you been backing out of your driveway or a parking spot only to have a little kid dart behind your automobile, seemingly out of nowhere? The camera is a perfect solution, you will have eyes in the back of your head
- Easy to install: 2 Installation options,you could choose bracket mounting or flush mounting as per your case
- Rear/Front Switchable: Optional Customized Distance Scale Lines & Mirror/Normal Image Switchable - You Can Use it as Rear View Backup Camera or Front/Side Camera Note: By default this is a reverse camera (mirror image) with distance scale line
- 170 Degree Wide View Angle to help you see blind area where your eyes can't reach.Work with your head units or aftermarket LCD/TFT displays with standard RCA input only,Suitable for variety of vehicles: car, mini-truck, mini-van etc,12V working Voltage ONLY,Support NTSC only
- Reliable and friendly customer service,1 Year Warranty,Ready to respond within a 24 hour time frame,30-Day Money Back Guarantee
Product features
Get a Better View Angle
If you want to get a perfect view angle, before drilling a hole, please seriously check and test to find where is the best position to mount this camera, please rotate the middle housing part of the camera (maximum 360 degrees) or move the bracket (maximum 90 degrees) to get the best view angle.
Super Night Vision
With advcanced night vision technology, it is easy to see things clearly in the dark, because its accurate recognition of lawns, stones, lakes, so it will be a reliable assitant at night. It also has clear and true color image at daytime, you can see the true color of the things you pass by.
Parking Safely
It is difficult to park without a rear view camera even though you are an experienced driver, we cannot see all of the area behind of our vehicles. With this 170° large Viewing angle reverse camera, you can see clearly everything at the back of your car and quickly and safely park you car well.
Image Flip Function
L002 backup camera supports Normal and Mirror image. You can install it in front/rear of your car to avoid any blind spot, the default is mirror image for rear view(keep the green wire).
Note: if the green wire is cut, it can't connect again, so please make sure you want a rear view camera or front view camera before you cut it.
170 Degrees Wide View Angle
RAAYOO L002 flush or bracket mount front/side/rear view camera adopt the 170°wide viewing camera lens, effectively help you see more area where your rear view mirror cannot reach, See wider,More safer.
Support Any Car Stereo with Standrad RCA Video Input
Works with your head units or aftermarke LCD/TFT displays with standard RCA input, 12V working Voltage ONLY,Please check if your display support RCA video input before make a order.
Get Better Your Rear View Image
RAAYOO L002 flush or bracket mount bind spot vehicle backup camera adopt 2020 latest 6pcs all-glass large aperture lens to provide HD resolution clear and true color image image for your vehicle without delay, No purple issue.
Easy to Install
1.Find a proper location to mount this reverse camera.
2.Connect the power wire of camera to your reversing light,postive to reversing light+,negative to revesing light - or ground.
3.Connect the video cable of camera to the head unit of your vehilce. Note:Please test the backup camera before rounting the video cable Connect trigger A with B if your head unit with a trigger wire A, if not, no need connect them.
4.Start the vehicle and gear on reverse to test the camera.
Above is the installation instruction for backup camera, you need to cut the green thin wire and white thin wire if you want to install it as a front view camera.
Latest Reviews
View all
Multivitamin Fermented With Probiotics
- Updated: 08.01.2023
- Read reviews

Case Ms
- Updated: 22.07.2023
- Read reviews

Lp For Men
- Updated: 14.02.2023
- Read reviews

120Mm Pwm Fans
- Updated: 06.04.2023
- Read reviews

Adidas Running Shoes
- Updated: 30.06.2023
- Read reviews