10 best vm audio car audio subwoofers

Product description

**Package Includes:**
2 x Pyle PLPW8D 8" 800W 4 Ohm Car Subwoofer The PYLE **PLPW8D** 8" 800W Dual Voice Coil 4 Ohm Car Audio Subwoofer can handle 800 Watts of MAX power! It features Specially Treated Foam Surround, Non Press Paper Cone, and a Black Steel Basket. Give your car audio system serious BASS with the PYLE **PLPW8D** 8" 800W Dual Voice Coil 4 Ohm Car Audio Subwoofer 1 buy = 2 subwoofers **We are an Authorized PYLE Dealer**

• 2) NEW PYLE **PLPW8D** 8" 1600W Dual Voice Coil 4 Ohm Car Audio Subwoofers (black)
• MAX Power: 800 Watts per sub (1600 Watts per pair)
• RMS Power: 400 Watts per sub (800 Watts per pair)
• Black Steel Basket
• Non Press Paper Cone

User questions & answers

Question:	Can i use these without a box
Answer:	Sorry do not get these subs that can't take the pounding and I hv a not powerful amp they started smoking
Question:	Is this a set of speaker or only 1speaker
Answer:	when i got them it was a set of 2. very nice for the price, dont push them.
Question:	I have a kenwood 500x1 @ 2 ohms. Can these be wired parallel to work with my amp? And is that enough power
Answer:	Not sure on that specific amp, I do know these speakers are surprisingly versatile for the price
Question:	Mounting depth
Answer:	They fit in my 4" deep box

Product description

Pyle Model : PLPW12D12'' Dual Voice Coil 4 Ohm Subwoofer12'' 1600 Watt Dual Voice Coil 4 Ohm Subwoofer SPL: 90dB60 oz. MagnetBlack Steel BasketNon-Press Paper ConeDual 4 Ohm Impedance2-Inch 4-Layer Dual Voice CoilSpecially Treated Foam Surround800 Watt RMS / 1,600 Watt Max PowerSpring Loaded Push Down Speaker TerminalsDimensions: 12.2" (Diameter) x 5.1" (Depth)The Pyle 12'' 1600 Watt Dual Voice Coil 4 Ohm Subwoofer - SPL: 90dB - 60 oz. Magnet - Black Steel Basket - Non-Press Paper Cone - Dual 4 Ohm Impedance - 2-Inch 4-Layer Dual Voice Coil - Specially Treated Foam Surround - 800 Watt RMS / 1,600 Watt Max Power - Spring Loaded Push Down Speaker Terminals - Dimensions: 12.2" (Diameter) x 5.1" (Depth).

From the Manufacturer

• 1600 WATT POWER: This high powered subwoofer system has a maximum power output of 1600 watt / 800watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want
• BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for extended excursion
• DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
• DUAL VOICE COIL: This complete subwoofer features 60 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring loaded push down speaker terminals
• 12" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 5.1" mounting depth and 12.2" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers
• Included Components: Power Series Dual Voice-Coil 4Ohm Subwoofer (12", 1,600 Watts)

User questions & answers

Question:	Does anyone know if these would be a good replacement for a15" 4ohm single voice coil speaker for a set of infinity s.m 150's
Answer:	Hi. we used 4 ohms dual voice coil to this unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLPW15D for more details. Thank you.
Question:	what size of box is best for this sub
Answer:	Im putting them in a 24"x 6" schedule 80 heavy duty PVC pipe. The cylinder volume is .39 cu. Do I Port or not port? Can I port the tube and put one woofer in each end? or should i use two separate 24" tubes. Thank you.
Question:	Frequency response ? I realize this is a small subwoofer but I am wondering if it will function ok as a woofer in a 2 way system? Thanks in advance
Answer:	Yes! These actually have a good range well into the mid-bass area. I've used many of the 6" 8" and 10" versions in custom 2-way configurations and they sound awesome! I typically use two decent tweeters (NEVER piezo), two 2-way crossovers, and one of these in the middle using the dual voice coil to handle both the left and right lows. (Note that if used in this type of 3-speaker configuration, the DVC must be located between the tweeters to preserve the stereo soundstage.) I usually make my pieces (it's a hobby) as stand-alone Bluetooth units with 100-200 watt amps, and they get very loud and maintain great bass punch (enclosure must be rigid). Best of all, I've used about 30 of these over the last few years, and none of them have blown or gone bad.
Question:	Will this sub work in a free air installation
Answer:	If "free air" means no box, then no, it won't work very well as a sub-woofer. If you mean a ported enclosure, then yes it will work well. A ported enclosure will give it a "boomey" kind of sound, which is fine for some types of music like hip- hop or metal. A sealed enclosure will make the bass sound tighter which is better for other types of music. The sealed enclosure will also require more power to drive the sub. Mine gets 100 watts continuous and I have used both types of enclosures. I'm skeptical about that 600 watt rating.

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

This Package Includes: 1 x Pyramid 1200 Watt Loaded Subwoofer Enclosure (2 12" Subwoofers) 1 x 1100 Watt Monoblock Amplifier 1 x 8 Gauge Wiring Kit The **Pyramid BNPS122** 12" dual car audio subwoofers with bandpass enclosue features a MAX power handling of 1200 watts at 4 ohm. This subwoofer includes a built in neon ascent lighting, specially treated black rubber edge suspension and bandpass alignment for extra deep bass. The front window is made out of plexi glass and the subwoofers have a silver polypropylene cone and 4 tuned ports. The **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts! This Class A/B amplifier features a MOSFET power supply, an impedance of 2 ohms, a line output, low pass crossover, and an illuminated Boss logo! The BOSS R1100M 1100 Watt Mono Car Audio Power Amplifier is the perfect amp to power your car audio system! ![alt text][1] [1]: https://www.vminnovations.com/sys/resource.ashx?guid=6088617e844b4420a69def16beba86bb

• SUBWOOFER: The Pyramid BNPS122 12" dual car audio subwooofers with a built in neon accent lighting, specially treated black rubber edge suspension, and bandpass alignment for extra deep bass.
• MONO CAR AMPLIFIER: The BOSS R1100M 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts
• AMPLIFIER KIT: This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car.
• SUBWOOFER BOX & SPECIFICATIONS: Plexi Glass Front Window; Frequency Response: 35Hz 1K Hz; 4 Ohm Impedance
• DIMENSIONS: 16''D x 31.5''W x 15.5''H

User questions & answers

Question:	Will this fit in a truck
Answer:	yes both of them are clipped on so they are removable
Question:	Fit in a grand am
Answer:	The USB cable for the massager is about 4 feet. The cable can be separated from the cushion to change to a different length cable.
Question:	Will this fit in a 2015 Camaro
Answer:	No, absolutely not. I'm not sure why people answered otherwise. In the description, it says PU leather - the PU stands for polyurethane. Essentially, that common fake leather used for lots of furniture. It's high quality, though.
Question:	Can i get it with out the subwoofer just the box and amp
Answer:	Depends on what you mean. I don't think it is supposed to. But the one I got when I sit in it, leans so far forward that it is unusable. And when I try to lean back the leather from the seat squeaks from rocking back into the backrest making it again not comfortable to sit in as the seat wants to continue to lean back.

Product description

Take your car, marine, or ATV audio to new heights with the awesome power and performance of a subwoofer that isn't afraid to get a little wet the Polk Audio DB+ 10 Inch 1050 Watt 4 Ohm SVC Marine Subwoofer. This subwoofer features a low profile design for more bass in less space, as well as Dynamic Balance technology, a IP56 marine rated design, a UV resistant polypropylene cone, and a waterproof santoprene surround. Boasting 350 watts of RMS power, frequency response of 28Hz 200 kHz, impedance of 4 ohms, and sensitivity of 85 dB, you can count on this sub to deliver consistent, powerful bass every time.

• 10 inch high performance subwoofer for your boat, car, or ATV, with 350 watts of RMS power handling
• Put heart thumping bass in your vehicle by land or sea
• Low profile design saves space needed for sub enclosures
• Features Dynamic Balance technology for richer, cleaner, more full range sound
• IP56 marine rating makes this sub resistant to water, dirt, salt fog, UV, and humidity

Product description

This is a bundle set that includes x2 Skar Audio EVL-65 D2 subwoofers. Skar Audio EVL-65 D2 subwoofers were designed to be the most responsive, powerful, and efficient 6.5 inch subwoofer on the market. Don't be fooled by it's size, the EVL-65 is one monster of a subwoofer, featuring a 2" pure copper voice coil, and a powerful 39 Oz single slug ferrite motor. The small size of this driver allows it to be very versatile, and can be used in a variety of applications where adding a woofer might not otherwise be possible. Conservatively rated at 200 watts RMS Power, and 400 watts max power. Dual 2-ohm voice coil.

• Sold as a Bundle Package, Set of 2 Subwoofers Included with Purchased
• Includes x2 EVL-65 D2 6.5-inch Dual 2-ohm Car Subwoofers
• Peak Power: 400 Watts (each)
• RMS Power: 200 Watts (each)
• 2" Pure Copper Voice Coil

User questions & answers

Question:	What is the air space of these speakers
Answer:	one cubic foot
Question:	Air space
Answer:	Each speaker needs to be one cubic foot air space
Question:	Whats the mounting depth of these subs
Answer:	3.56 inches
Question:	Will these fit in a 2014 tundra double cab
Answer:	These speakers are not designed to be installed directly into your vehicle. They are designed to go into an enclosure of a specific size that can then be used in your vehicle. If you are looking for a direct bolt in speaker there are numerous selections available.

Product description

Keep the bass bumping in your ride with the Kicker 12 Inch Subwoofer Enclosure. This quality enclosure is built with heavy MDF construction and thick black carpet for durability. The 12 inch subwoofer enclosure works best with 600 watts of power, and recommended for use with rap or music with rumble bass. It features 4 ohm impedance and 95 dB of sensitivity. Get more out of your music and ride in style with the Kicker subwoofer enclosure.

• 12-INCH LOADED SUBWOOFER: The Kicker CompC 12 Inch 4 Ohm Compact Thin Profile Vented Loaded Subwoofer Enclosure will give you incredible bass and is easy to install nearly anywhere; Compact to use very little trunk space
• 600 WATT POWER: 600 Watts MAX 300 Watts RMS power
• PORTED DESIGN: Features a custom ported design and spring loaded speaker terminal
• ENCLOSURE: Enclosure is constructed out of heavy MDF; Thick black carpet with embroidered Kicker logo that protects the enclosure
• SPECIFICATIONS: Impedance: 4 ohm; Sensitivity: 95.3 dB; Dimensions: 17.5 x 16 x 11.4375 / 14.625 inches (W x H x Top Depth / Bottom Depth);Weight: 24 pounds; Manufacturer warranty: 1-year warranty

User questions & answers

Question:	Would this speaker fit under seat in a 2004 Chevy Silverado 1500 extended cab
Answer:	I don't think this will fit under the sit of your Silverado, Height 16in 40.6cm Width 17in 43.2cm & Depth 11 1/4in 28.5cm upper & 14 1/2. 36.7cm Lower.
Question:	What are the dimensions of this box
Answer:	Depth top 11.1/4 in 28.5 cm depth bottom 14.1/2 in 38.7 cm Height 16.40.6 in. cm and width 17.43.2 in. cm
Question:	Does it come with the wiring
Answer:	You need your speaker wires from amp to the kickers. It's a plug and play ready to go.

Product description

Give your vehicle's audio system an upgrade with the SSL LOPRO10 Class a/b 10"" Low profile amplified subwoofer. This powerful amplified subwoofer Features 1200 watts Max power with a MOSFET power supply to take your music to the next level. With high and low level inputs It can be hooked up to just about any In-Dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the variable low Pass Crossover, bass boost, subsonic filter, phase control and remote subwoofer control. Gear up and get your music thumping with the sound storm LOPRO10. For further product details, please scroll down.

• Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low level inputs: line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it
• Dimensions: 15” x 9. 75” x 3”. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• : sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Is this subbwoofer water resistant, for use on a boat
Answer:	Not waterproof. You would have to put it in a waterproof enclosure.
Question:	Would this do a good job in a mini van? Not looking to entertain the neighboring car, but would like to enjoy the bass and keep it out of sight
Answer:	I think it would work very well in a mini van. I put this behind the backseat of my 2004 Frontier Crew Cab and because the cabin is relatively small and I can barely turn it on without being overwhelmed. I think it would work perfectly well in a much larger vehicle. Honestly, I'm blown away by how well this simple sub performs and how small/thin it is. Never would have believed it if I hadn't bought it.
Question:	What hardware or tools I need for the installation of the Sound Storm Laboratories LOPRO10 LoPro Series Low Profile Amplified 10-Inch Subwoofer
Answer:	You will need an inexpensive amp wiring kit, I used the 4 guage kit available here and wire strippers or a razor knife would work and a cable end crimper or even some pliers would work just fine for crimping wire ends on. the amp itself comes with everything to mount it two different ways, the easiest way especially if you are mounting it to carpet is the adhesive backed Velcro tape, that's how I mounted mine, I have two of them installed in the rear hatch floor of a fiat 500, the Velcro is very effective or you can use the metal screws that are also included.
Question:	Can someone say what are the actual measured dimensions of the product and fuse amperage please
Answer:	Actual dimensions of the unit are 15x12x3. The box it comes in is 18x14x5.

Product features

Deep Bass Low Profile

Enjoy the rich sound of Bass in just about any vehicle with the SSL LoPro10 Class A/B 10 inch Low Profile Amplified Subwoofer. With 1200 Watts Max Power and MOSFET power supply and High and Low Level Inputs, this Amplified Subwoofer can be hooked up to just about any in-dash stereo. With a height of just 3 inch, it's a perfect solution when space is an issue as it can easily fit under the seat of most vehicles. Customize the sound with the Variable Low Pass Crossover, Subsonic Filter, Phase Control and Remote Subwoofer Control.

Break Your Subwoofer In

This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life.

Built-In Amp and High and Low Level Inputs

Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Phase Control

Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.

Low Profile

Low-profile subwoofers are a great choice for space-constrained areas without compromising on power and performance.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Serious audiophiles know that it's the little things that can make a big difference in car audio, and that's what AudioPipe focused on when they engineered the AudioPipe TXX BD2 15 1800 Watt 15 Inch DVC Car Subwoofer. One of the best subwoofers for hard hitting bass, this 1000 watt car subwoofer features an air cushion foam surround composite cone, as well as an oversized pipe shape on the deep dumped T yoke. The 4 layer dual voice coil measures 3 inches, while the strontium magnet is 160 ounces. This car subwoofer also features a mounting depth of 8.25 inches so you can fit it into the perfect box, as well as sensitivity of 96 dB and impedance of 4 ohms.

• 15-INCH SUBWOOFER PAIR: 15 inch high power subwoofer with a mounting depth of 8.25 inches to turn up your car audio bass; Quantity: 2
• 1800 WATT POWER: Max power: 1800 watts; RMS power: 1000 watts
• DUAL VOICE COIL: Built in 3 inch, 4 layer black aluminum dual voice coil 4 ohms Impedance and 96 dB sensitivity with a 24 - 800 Hz frequency response
• ALUMINUM BASKET: Features powdered and cast black aluminum basket, an air cushion foam surround composite cone and an oversized pipe shape on the deep dumped T yoke
• SPECIFICATIONS: Mounting depth: 8.25 inches; Strontium magnet is 160 ounces; Heavy duty multi connect terminal; Manufacturer warranty: 1-year warranty; Quantity: 2

User questions & answers

Question:	Is it two speakers or one
Answer:	2
Question:	How many watts per speaker
Answer:	1800 watts

Product description

Package includes: 2 Boss 12" Car Subwoofers 1 Boss Mono Amplifier 1 Amplifier Installation Kit Give your car's audio system extra bump with these Boss CX122 Subwoofers. Offering a 1400 watt max and a 700 watt RMS per sub, these Boss CX122 subs have a heavy stamped steel frame, single 4 Ohm voice coils and a custom tooled injected cone. The Boss CX122 subs have a mounting depth of 5.4" and are 12". The **Boss AR1500M** MONO class a/b amplifier features a MAX power of 1500 watts and a RMS power of 700 watts at 4 ohm. Other features include a MOSFET power supply, class A/B circuitry, 2 ohm stable and a low pass crossover. Also, includes a remote bass control. The BOSS AR1500M amplifier is the perfect amp to power your car audio system! Amplifier installation kit included!

• **Subwoofers:**
• NEW PAIR BOSS AUDIO CHAOS 12" 2800 WATT Car Subwoofers
• 1400 Watt MAX (2800 Watt PAIR)
• 700 Watt RMS (1400 Watt PAIR)
• Heavy Stamped Steel Frame

User questions & answers

Question:	I just recieved my package and there is no subwoofers
Answer:	You need review your order again, if it's okay so call Amazon and let them know something is missing.
Question:	Does this fit 07 Subaru Impreza
Answer:	Im sure it would it fits nicely in my truck
Question:	I just got my kit in the mail, will the one amp will run both subs and i did not see the wire from the amp to the speckers
Answer:	The one amp will run both speaker it's a mono block amp so there will be only 2 terminal on the amp for speaker (+) (-)....unfortunately the kit comes with everything except for speaker wire
Question:	Will this fit a 2008 mission titan crew cab
Answer:	Yes