11 best seismic audio powered subwoofers

Product description

Powered 10" PA/DJ Subwoofer Cabinet - Model: Really-Mini-Tremor, Condition: New, Application: Subwoofer/PA Subwoofer/DJ Subwoofer, Active/Passive: Active, Woofer: 10", Woofer Specs: 50 oz. Magnet and 2" Voice Coil, Frequency Response 50 Hz - 300 Hz, Power: 250 Watts RMS; 500 Watts Peak, LPF 40 Hz - 150 Hz, Connectors: Two Line Input/output - XLR Combo / Male XLR, Nominal Impedance: 8 Ohms, Amplifier: Class AB, Features: Can be Daisy Chained / Low Pass Filter Adjustment / Polarity Switch: Normal / Inverted, Grill: Powder Coated Full Metal Grill, Handles: Recessed Handles, Covering: Black Carpet, Enclosure: 5/8" Plywood front panel, Pole Mount: Yes, Volume Control: Yes, Height: 15.75", Width: 13.5", Depth: 14.25", Weight: 27 lbs. per Cabinet, Warranty: One Year Warranty. After numerous requests for a 10 Inch Subwoofer, we developed the Really-Mini-Tremor. It may be small, but the bass is big! This is a high performance, compact 10" Active subwoofer. The Really-Mini-Tremor was designed with smaller live sound and DJ setting in mind...compact size with deep bass production, this powered 10" subwoofer can drop the bass! The Really-Mini-Tremor subwoofer cabinet houses a 10" Woofer that operates at 250 Watts RMS and 500 Watts Peak Power and reproduces low frequencies down to 40 Hz. The built in amplifier makes it the perfect all in one solution to any PA application, whether it be Clubs, DJ, party's, weddings, or Church events. The Mimi-Tremor 10 Inch Active Subwoofer also contains a pole mount to accommodate a satellite speaker for optimal full range PA performance.

• Model: Really-Mini-Tremor
• Condition: New
• Application: Subwoofer/PA Subwoofer/DJ Subwoofer
• Active/Passive: Active
• Woofer: 10"

User questions & answers

Question:	Can I use this as a powered extension speaker/monitor for my acoustic amp
Answer:	Hi, This Really-Mini-Tremor is a powered 10" subwoofer, so if you are looking to increase your low end response of your acoustic guitar, and your current amp has a line-out, then yes you can connect to this Really-Mini-Tremor. This RMT has an XLR female-1/4" TRS combination input jack. that will accept either a male XLR plug, or a 1/4" TRS. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	I have this speaker . Can I daisy chain an unpowered sub to it? Or does it have to be a powered sub
Answer:	Hi, This sub can only be daisy chained to other powered subs or pa speakers. It does not have power built in to power a passive sub.
Question:	Anyone know true rms power on this cause I have it and it’s not even rumbling
Answer:	Hi, The Really-Mini-Tremor are rated 250W RMS. If you are experiencing issues with your Really-Mini-Tremor, please give us a call at 1.877.347.6423. We are available Monday - Friday from 9 AM to 4:30 PM CST to go over some troubleshooting steps with you to determine what could be causing the issue with the performance of your Really-Mini-Tremor. Thanks, Rusty
Question:	What connection formats are the inputs & outputs
Answer:	Hi, The Really-Mini-Tremor powered 10" subwoofer has an XLR Female-1/4" TRS combination input jack, which will accept a line-level Male XLR plug or a 1/4" TRS (mono balanced) type signal from a mixer. The RMT has an XLR male output jack. This output will pass through the original signal you feed into the RMT. The RMT does have a volume control knob and a Low Pass Filter (LPF) knob that will control the 10" subwoofer, but they will not affect the original signal you feed into the RMT, and this original signal will be passed through via the XLR Male output. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty

Product description

Powered 12" Pro Audio/ DJ Subwoofer Cabinet - Model: Mini-Tremor, Contents: Powered 12" Subwoofer Cabinet, Application: Subwoofer | PA Subwoofer | DJ Subwoofer, Condition: New, Active / Passive: Active (Powered), Connector(s):Two Line Input/output - XLR Combo / Male XLR, LPF (Low Pass Filter):40 Hz - 150 Hz, Volume Controls: Master Volume Control, Power Rating 350 Watts RMS; 700 Watts Peak, Nominal Impedance 8 Ohms, Speaker Size 12", Magnet Size 50 oz., Handle(s):Recessed Pocket, Voice Coil:2" Voice Coil, Frequency Response 45 Hz - 300 Hz, Sensitivity 95 dB, Ports: Yes, Grill: Full Metal Grill, Enclosure:5/8" Plywood Front Panel and MDF, Covering: Black Carpet with Black Metal Corners, Pole Mount: Yes, Amplifier Type: Class AB Amplifier, Height:18.5", Width:15.75", Depth:15.75", Weight 43 lbs. per Cabinet, Warranty: One Year Warranty. Our Tremor line of Pro Audio Subwoofer Cabinets are consistently a best seller and receive high praise for their ground shaking bass performance. After numerous requests for a 12 Inch Subwoofer, we developed the Mini-Tremor. When it comes to power and performance, there is nothing mini about the Mini-Tremor Powered 12" Subwoofer Cabinet! This is a high performance, compact 12" Active subwoofer. The Mini-Tremor was designed with smaller live sound and DJ setting in mind...compact size with deep bass production, this powered 12" subwoofer produces all the deep low end bass you crave!

• Model: Mini-Tremor
• Contents: Powered 12" Subwoofer Cabinet
• Application: Subwoofer | PA Subwoofer | DJ Subwoofer
• Condition: New
• Active / Passive: Active (Powered)

User questions & answers

Question:	Can I hook a single bass durm mic to it
Answer:	It comes with an XLR, USB C to USB C, and USB C to USB
Question:	Ordered a pair of this sub. what's the best way to connect them from the mixer? using a pair of powered behringer b212d, pair of powered kustom pa
Answer:	We suggest a maximum weight of 10 lbs, but they will support up to 15. (The stand will flex more under 15 lbs, so it's not optimal.)
Question:	what is the input connection 1\4, or xlr
Answer:	The stand height is around 4 inches
Question:	Does it run with european power grid
Answer:	No. RCA cables are two phase both + and - in one cable. These are one phase, one + and one - per each (two) quick lock couplers.
Question:	i want to use this for my wedding. i have the powered baby tremor sub and two satellites; what else do i need to have music and pa system
Answer:	The black body is 5/8". The gold body is 1/4". The gold plug that fits into the jack is 3/4". The total plug is 1 5/8".It will stick out of the jack about 7/8". I have not found any that are shorter.
Question:	I have the seismic audio - paio15s how would i connect this sub to my powered speakers
Answer:	Not for sure. I used 12 awg and it fit perfect.
Question:	Has anyone tried putting casters on this sub? Would it damage it if I put casters for easier transport
Answer:	It depends on the amplifier. Some of the newer amplifiers/Power Amps have the the connections for the Monster Quick Lock connectors built in, example McIntosh MC252. Some older amps McIntosh/Marantz you have to purchase clips that the Quick Locks fit into. Make sure you check the back of the Amp.
Question:	Would this be a good addition for a couple of PYLE PPHP123MU's? Would I go master out from my ddjsx > sub > left and right speaker? 15" or
Answer:	Two pair.

Product features

Seismic Audio 15" Powered Subwoofer Cabinet

Our powered 15-inch pro audio subwoofer cabinet delivers the low-end sounds loud and clear with a 15-inch woofer and 300 watts RMS. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality powered subs are very hard to find, especially affordably. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash sound great. With your purchase, you will receive a powered 15" subwoofer cabinet pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Baby Tremor 15

This listing is for an 15" pro audio powered subwoofer cabinet. You will receive one powered 15" pro audio subwoofer pictured and described above. This high-performance, active subwoofer speaker system was designed with larger PA or DJ settings in mind. The Baby Tremor powered 15" subwoofer cabinet provides the power and performance you need. This powered subwoofer yields powerful deep bass reproduction and tight low end in a compact cabinet. The Seismic Audio brand was designed with the notion that every musician should have access to high-quality pro audio gear affordably.

Back Panel

The Baby Tremor PW rear panel is outfitted with two input/output XLR and 1/4" (monobalanced TRS) combo jacks as well as two power speakon and banana-clip outputs. This sub also has a low-pass filter and separate sub and satellite volume and balance controls, two-channel satellite power output (150 watts peak x2), a clip light and a power light.

Protective Hardware

Heavy-duty, rugged hardware protect our Baby Tremor PW sub cabs with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet. Also, the Baby Tremor PW comes with a pole mount in order to mount main speaker cabs elevated above.

Heavy-Duty Recessed Handles

In order to transport your subwoofers easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

Pair of Powered PA 18" Subwoofer Speaker CabinetsModel - Enforcer II PW (Pair). Subwoofer - 18" 120 oz magnet 4" Voice Coil1200 Watts RMS. Line Output - XLR Male. Line Input - 1/4" and XLR Combo Jack. Power Output - Speakon. Volume Control. LPF (Low Pass Filter) - 45Hz - 800Hz. Clip Light. Power Light. Can be Daisy Chained. Wired at 8 ohms. Sensitivity: 101 db. 5/8 Plywood. Black carpet with black metal corners. Recessed Metal handles . Metal Speaker Pole Mount on Top. 28" tall - 22" wide - 22" deep. 98 lbs per cabinet. These speakers are brand new.. One year warrantyThis amazing 18 inch Pro Audio Subwoofer Cabinet delivers the low end sounds loud and clear with a 18 inch woofer and 1200 watts. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality subs are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive two 18" Subwoofer Cabinets pictured and described above. So, put them in your cart today and get ready for years of trouble-free, crystal clear sound!

• Model: Enforcer II PW (Pair) 1200 Watts Each
• 18" Subwoofer - 120 ounce magnet, 4" Voice Coil
• 8 Ohms, 101 db - Plywood Construction
• Line Output/Input - XLR Male / 1/4" and XLR Combo Jack, Low Pass Filter, Clip and Power Light
• Can Be Daisy Chained

User questions & answers

Question:	i need 2 powered subs) so here in the real world , whats the real wattage rms
Answer:	Thank you for your interest in the Seismic Audio Enforcer II. It sounds like you are asking how loud the speaker is. This is measured in decibels (dB) not watts. You compare the sensitivity (dB measured at 1 watt and 1 meter) to compare volume at the same power. For each doubling of wattage you get an increase of 3 dB. This is how can have two speakers with truly the same wattage, but one is louder than the other. There is more to sound than the amount of electricity used. This speaker is a 1000 watt RMS driver that can do 2000 watts peak. The amp will put out 1200 watts. The Sensitivity is 101 dB. Have a great day!
Question:	I just need one powered pa 18” subwoofer speakers cabinet model enforced ii pw
Answer:	Hi, Here is the listing for the single Enforcer II PW: https://www.amazon.com/Seismic-Audio-Enforcer-Powered-Subwoofer/dp/B004G936N4 Thanks, Rusty
Question:	What do I need to power these babies? Amp wise
Answer:	no they have amp built in
Question:	Are they good for home theater system . And do they have active crossover antinuation
Answer:	Thank you for asking. This is a very large powerful sub designed for DJ's and bands to be used for PA. It can be used for home purposes as long as you provide a line level signal to the XLR input. There is an LPF knob to set the crossover frequency to the sub. Have a great day!

• Model: SA-BPT10 | Passive 10 Inch Car Audio Subwoofer Tube Enclosure | High Powered Tube Enclosure with Carpet Finish
• Power Rating: 500 Watts Max Power | Impedance: 4 Ohms
• Polypropylene Cone with Rubber Edge Suspension
• High Powered 10 inch Woofer with a Non-Pressed Paper Cone and Specially Treated Foam Surround | 2 inch 4 Layer Voice Coil | 40 ounce Magnet | Frequency Response: 35-500 Hz | Sensitivity: 90dB
• Rear Vented Design for Ultimate Bass Response | Dimensions: 21.65" x 11.45"

Product description

Active Slim Mount 10 Inch 500 Watt Truck Subwoofer Enclosure - The Seismic Audio Series of Car Audio Subwoofers were built to give you the deep, chest-thumping, low-end bass you desire in your car audio system. If you are looking for maximum bass response, punch and additional sub-bass kick, the Seismic Audio car audio subwoofer enclosures are exactly what you need. This Powered Slim Mount 10 Inch enclosure is powered by a Class D amplifier, has a max output of 500 watts, and has a shallow, slim design to fit in even the tightest places. Perfect for truck and behind the seat, the rear seal design is sure to supply that super low-end bass. High-Quality Construction and a smooth carpet finish allow this box to fit in with your existing system or replace your old one. With our series of Car Audio Subwoofers, you will turn heads, people will hear you coming and you may even break noise-ordinance rules.

• Model: SA-SCE10-A | Powered 10 Inch 500 Watt Slim Mount Truck Audio Subwoofer Box
• Built-In Class D Power Amplifier | Rear Air Tight Seal Design | Power Rating: 500 Watts Max Power
• High Powered 10 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish | Voice Coil: 2 inch 4 Layer Dual Voice Coil
• Impedance: 4 Ohms | Magnet: 40 Ounce | Sensitivity: 90 dB | Frequency Response: 35-300Hz | Inputs: RCA and High Level | Gain Control | 12V Power Input
• Positive Pole: Connects +12V and REM in Parallel | Negative Pole: Connects to Ground | Dimensions: 19.7" x 13.6" x 6" | Weight: 23.1 lbs

Product description

Powered 12" Pro Audio/ DJ Subwoofer Cabinet - Over the last 20 years, Seismic Audio has become synonymous with high-quality and affordability in Pro Audio and DJ Gear. Our Subwoofer Cabinets have always been awesome and received high praise for their ground-shaking bass performance. We are pretty sure we outdid ourselves this time! Introducing the Shockwave series of PA/DJ Subwoofers. Once you hear these, you will agree that we could not have picked a better name for this line of subs. Deep, punchy and low-end bass unlike any other subwoofer we offer in 12 or 15 inch models. This is a high performance, compact 12" Powered subwoofer with a Class D Amplifier. The Shockwave series was designed with medium to smaller live sound and DJ venues in mind. Do not let the compact size mislead you! Make sure pictures are secure and that nothing is close to the edge of a table. These subs will move furniture with its deep bass reproduction. These hit so hard, if you are standing in front of it, your heart may skip a beat and you will swear it is more than a 12 or 15 inch sub!

• Model: Shockwave-12 | Active 12" Subwoofer Cabinet
• Active / Passive: Active (Powered) - Class D Amplifier Built-In | Great for Pro Audio, DJ, Clubs, Bars, or any medium to smaller sized venues
• Power Rating: 400 Watts RMS; 800 Watts Peak | Frequency Response: 30 Hz - 200 Hz | Connector(s):Two Line Input/Output - XLR | LPF (Low Pass Filter): 40 Hz - 250 Hz | Nominal Impedance: 4 Ohms
• Woofer Size: 12" | Magnet Size: 50 oz | Voice Coil: 2" Voice Coil | Volume Controls: Master Volume (Gain) Control | Polarity Switch | Protection: DC, Short Circuit, RF Protection | Fan Cooled
• 100 Hz Low_Cut Out (L and/or R) | THD (Total Harmonic Distortion): < = 0.1% | Sensitivity: 93dB | SPL: 122dB | Crossover Point: 150Hz | 5/8" Plywood Front Panel and MDF | Full Metal Grill | Black Carpet with Black Metal Corners | Height: 18.5" | Width: 22.5" | Depth: 22" | Weight: 50.7 lbs per Cabinet

Product description

Active Slim Mount 12 Inch 600 Watt Truck Subwoofer Enclosure - The Seismic Audio Series of Car Audio Subwoofers were built to give you the deep, chest-thumping, low-end bass you desire in your car audio system. If you are looking for maximum bass response, punch and additional sub-bass kick, the Seismic Audio car audio subwoofer enclosures are exactly what you need. This Powered Slim Mount 12 Inch enclosure is powered by a Class D amplifier, has a max output of 600 watts, and has a shallow, slim design to fit in even the tightest places. Perfect for truck and behind the seat, the rear seal design is sure to supply that super low-end bass. High-Quality Construction and a smooth carpet finish allow this box to fit in with your existing system or replace your old one. With our series of Car Audio Subwoofers, you will turn heads, people will hear you coming and you may even break noise-ordinance rules.

• Model: SA-SCE12-A | Powered 12 Inch 600 Watt Slim Mount Truck Audio Subwoofer Box
• Built-In Class D Power Amplifier | Rear Air Tight Seal Design | Power Rating: 600 Watts Max Power
• High Powered 12 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish | Voice Coil: 2.5 inch 4 Layer Dual Voice Coil
• Impedance: 4 Ohms | Magnet: 50 Ounce | Sensitivity: 91 dB | Frequency Response: 28-200Hz
• Inputs: RCA and High Level | Gain Control | 12V Power Input | Positive Pole: Connects +12V and REM in Parallel | Negative Pole: Connects to Ground | Dimensions: 19.7" x 15" x 7.1" | Weight: 27.6 lbs

Product description

500 Watt Plate Amplifier for PA/DJ Subwoofer Cabinets Model: SA-APAS01. Contents: 500 Watt Subwoofer Plate Amplifier. Condition: New. Amplifier Type: Class AB. Power Rating: 500 Watts RMS; 1000 Watts Peak. Line Input: 1/4 and XLR Combo Jack. Line Output: XLR Male. Controls: Subwoofer: Low Pass Filter and Master Volume Controls. Satellite Control: Treble, Mid, Bass, Volume, Balance. Protection: Overload Protection, Over Current Protection, Short Circuit Protection. Features: 3 Band Equalizer - Treble, Mid, Bass. Two Channel Satellite Power Output: 8 Ohm - 2 x 120 Watts - 4 Ohm - 2 x 200 Watts. Voltage Changeover Switch: 115V/230V. Dimensions: 16.9" x 12.5" x 5.90". Weight: 26 lbs. Warranty: One Year WarrantySeismic Audio's line of Plate Amplifiers gives you the ability to build your own powered speaker cabinets and powered subwoofer cabinets. The SA-APAS01 is a Class AB amplifier designed for Subwoofer enclosures. It has a power rating of 500 Watts RMS and 1000 Watts Peak. This plate amplifier offers 2 Speakon Power outputs to power 2 Satellite speakers. This amp also has Low Pass Filter and Master Volume controls as well as circuit and overload protection. When paired with the right subwoofer driver and speaker, these plate amplifiers produce the loud, clear, and clean sound to reinforce your PA loudspeaker system. With your purchase, you will receive one 500 Watt Plate Amplifier pictured and described above.

• Model: SA-APAS01
• Contents: 500 Watt Subwoofer Plate Amplifier
• Condition: New
• Amplifier Type: Class AB
• Power Rating: 500 Watts RMS; 1000 Watts Peak

User questions & answers

Question:	So the lpf only affects the sub? doesn't act a a cross over for the tops
Answer:	Normally speakers set equally, or on full, then use mixer to adjust house , or main volume, also be sure to have both speakers , if using a pair of powered speakers, not to depress mic button for input level. They are great for portable dj due to size vs weight, saves setup time and sound quality is capable for small to medium venues, as outdoor you'll want subs, they are great for taverns , clubs, and tent weddings. Great value.
Question:	will this work on the 15" cabinet? baby tremor
Answer:	From the Specs i have read they are 660 total Watts. LF Driver Power Amp: 410W Peak HF Driver Power Amp: 250W Peak
Question:	Are the two satellite amp channels bridgeable into one mono output
Answer:	Solo incluye el de corriente
Question:	will it push 2 ,4ohm 350 watt each 15in subwoofers
Answer:	No

Product description

The Seismic Audio SA-GFC Series of Car Audio Subwoofers were built and designed to be the new gold standard in car audio subwoofers. The components that go into these subwoofers put them in a class of their own and provides a deep, low-end bass response. The GFC series is equipped with a compound fiberglass cone attached to a specially treated foam surround. They also have powerful magnets and high performing voice coils inside a professional-grade die-cast aluminum cast basket. These woofers are the perfect choice for those looking for superior bass reproduction and low-end response. Your car audio system is a big investment, drop the Seismic GFC series subwoofers in. Not only will you enjoy chest-thumping, hard-hitting bass, but the looks of envy of those that don't have them. The performance of the GFC series is unmatched and the power of each size is unparalleled compared to its competition.

• Model: SA-GFC104 | High Powered 10 Inch Dual 4 Ohm Car Audio Subwoofer
• Power Rating: 800 Watts RMS | 1600 Watts Peak Power | High-end Compound Fiberglass cone and specially treated foam surround
• Dual 3" Voice Coil | Impedance: Dual 4 Ohm | 3 x 60 ounce Magnets
• SPL: 91 dB | Frequency Response: 35-200Hz | Cutout Diameter: 9.25" | Mounting Depth: 7.48"
• TS Parameters: Fs: 37.0658Hz | Re: Dual 4 Ohm | Qms: 4.3661 | Qes: 0.4998 | Qts: 0.4485 | Nrf: 0.19% | Cms: 0.14mm/N | BL: 14.8 n/a | Vas: 16.2301L | Xmax: 20

Product description

Pair of Professional 15" Speaker MainsModel #: SA-15T (Set of 2). 15" Woofer. 350 Watts RMS; 700 Watts Peak per cabinet. Woofer has 50 ounce magnet and 2.5" kapton voice coil. 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat. Two 1/4" inputs and two Speakon inputs. Frequency Response: 45Hz to 20kHz. Crossover: 12/18db per octave 3K hz high power with dual glass bulb tweeter protection. Impedance: 8 Ohms. Sensitivity: 96 db. Dual ports. Full metal grill. Recessed Handles. Black carpeted covering with black metal corners. LxWxD: 25"x20"x16". Weight:  52 lbs per cabinet. Condition: New. One Year WarrantyThis listing is for a pair of these 15" speaker cabinets.  You will receive two identical speaker cabinets, pictured and described above.  Each speaker cabinet has the specs above.These amazing 15 inch Speaker Cabinets deliver every sound loud and clear with a 15 inch woofer, 1.5 inch titanium tweeter driver, a frequency response of 45Hz to 20,000Hz, and 350 watts RMS, 700 watts peak power per cabinet. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these speakers will deliver the sound you want! Great quality mains are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. With your purchase, you will receive a pair of 15" Speaker Cabinets pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

• Woofer - 15" 2 way w/ 50oz magnet & a 2.5" kapton voice coil.  350 Watts RMS – 700 Peak
• 8 ohms 45Hz –20KHz Sensitivity: 96 db Tweeter: 1.5" Titanium driver 10z. magnet & 1" throat
• Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection
• 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Metal Grill
• Input terminal has two 1/4" & two Speakon inputs. 1.5" stand mount. 29" T - 19" W - 15" D

User questions & answers

Question:	do i need a amp to hook these babies up to my home stero
Answer:	Hi, This may be a Yes and No answer. Your home stereo may already have some AMPLIFIED outputs, usually seen in the form of Red and Black binding posts or push lock terminals for raw speaker wire, to power some PASSIVE speakers. Usually the speakers for home stereo or home audio surround sound receivers are much smaller "bookshelf" style speakers, which typically require less wattage to "drive" or "power" than something like these full size Seismic Audio SA-15T. Each one of these SA-15T cabinets is rated at 350W RMS at 8 Ohm. Ideally your home stereo's AMPLIFIED output would be around 1.5 times this rating, or 350W RMS * 1.5 = 525W RMS at 8 Ohm. If your home stereo is rated around this 525W RMS at 8 Ohm per channel, then you are good to go. If not, you may want to look into going with a separate power amplifier for these SA-15T, something like our MBG-4000, which you can find on Amazon here: https://www.amazon.com/Seismic-Audio-MBG-4000-Power-Amplifier/dp/B007W4VN1M/ref=sr_1_1?ie=UTF8&qid=1520266248&sr=8-1&keywords=mbg-4000 If you go this route, you will need to find some line-level output from your home stereo, something like the RCA red and white female jacks or an 1/8" headphone or "Auxiliary" output. This would need to be an OUTPUT not an input. This output would allow you to send the line-level signal from the home stereo into the MBG-4000 amp, so it can amplify this signal to speaker level, and send on to the SA-15T. If you go the route of a separate amp, you will need the line-level cable to get out of the home stereo and into the MBG-4000 amp, and the "speaker cables" to output from the amp and connect to the SA-15T speakers. You can email us directly at [email protected] if you have any questions. Thanks, Rusty
Question:	How are these speakers powered? D cord
Answer:	These are passive speakers. They can accept Speakon or 1/4" speaker cables.
Question:	My amp says use 6-16 ohm speakers. does that mean 6 speakers at 16 ohms or 6 through 16 ohm. these speakers are 8 ohm. do i have an option? sean b
Answer:	Hi Sean, This 6-16 Ohm on your amp/receiver is indicating the impedance of the speakers you may connect to each channel. You are typically more interested in the lower number, this 6 Ohm, as this is the LOWEST STABLE IMPEDANCE for these output channels of your receiver. With impedance, the lower the number, the more work is being done. This amp is telling you that it can go down to 6 Ohm, but no lower. Should you connect a lower impedance speaker, or chain of speakers, then the output channel of the amp will fry. Since these SA-15T are rated at 8 Ohm, your amp can support one per channel, at least in terms of the impedance. You must also consider the wattage output of your amp, at this impedance of 8 Ohm. These SA-15T are rated at 350W RMS at 8 Ohm. You would want to at least match this wattage rating, with the ideal wattage rating being around 1.5 times the wattage of the speakers, or 350 * 1.5 = 525W RMS at 8 Ohm. This would be the ideal power rating for the amplifier you are using to drive these SA-15T. If your amplifier is rated lower in terms of wattage than this 350W RMS at 8 Ohm, then you will be underpowering these SA-15T and this could lead to poor performance from the speaker, when it is not the fault of the speaker. Please email us directly at [email protected] if you have any questions. Once we reply to this Amazon Answers question, we can not reply back or comment. Thanks, Rusty
Question:	How to i hook up this pair of speakers to a europower PMP 4000 mixer
Answer:	Hi, You should be able to use Speakon cables to connect from the powered outputs of your Behringer PMP4000 to one of the Speakon input jacks on each speaker. You can check out our 25 foot Speakon cables, product code TW12S25 here: TW12S25Pair: https://www.amazon.com/Seismic-Audio-TW12S25Pair-25-Feet-Speakon/dp/B004HKMROQ/ref=sr_1_1?ie=UTF8&qid=1503070124&sr=8-1&keywords=tw12s25pair Thanks, Rusty

Product features

Description

Pair of Professional 15" Speaker Mains

• Model #: SA-15T (Set of 2)
• 15" Woofer in each Cabinet
• 350 Watts RMS; 700 Watts Peak per cabinet
• Frequency Response: 45Hz to 20kHz
• 3K hz high power with dual glass bulb tweeter protection
• Impedance: 8 Ohms
• Sensitivity: 96 db

Features

• Crossover: 12/18db per octave
• Woofer has 50 ounce magnet and 2.5" kapton voice coil
• 1.5" Titanium tweeter driver with 10 ounce magnet and 1" throat
• Two 1/4" inputs and two Speakon inputs
• Dual ports

Specifications

• Full metal grill
• Recessed Handles
• Black carpeted covering with black metal corners
• LxWxD: 25"x20"x16"
• Weight: 52 lbs per cabinet
• Condition: New

Product description

Dual 8 Inch 800 Watt Car Audio Subwoofer Enclosure with LED - The Seismic Audio Series of Car Audio Subwoofers were built to give you the deep, chest-thumping, low-end bass you desire in your car audio system. If you are looking for maximum bass response, punch and additional sub-bass kick, the Seismic Audio car audio subwoofer enclosures are exactly what you need. This Dual 8 Inch enclosure has a max output of 800 watts, a built-in multi-mode LED lights, and quad bass vent to supply that super low-end bass. High-Quality Construction and a smooth carpet finish allow this box to fit in with your existing system or replace your old one. With our series of Car Audio Subwoofers, you will turn heads, people will hear you coming and you may even break noise-ordinance rules.

• Model: SA-PGCE08LED | Dual 8 Inch 800 Watt Car Audio Subwoofer Box
• Built-In Multi-Mode LED Lights Integrated with Plexiglass Front Window | Power Rating: 2 x 400 Watts Max Power
• High Powered Dual 8 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
• Voice Coil: 1.5 inch 4 Layer Dual Voice Coil | Impedance: 4 Ohms | Magnet: 2 x 30 Ounce | Sensitivity: 89 dB | Frequency Response: 45-800Hz
• 4 Port Vented Design for Ultimate Bass Response | Binding Post Connectors | Remote and 12V Adapter Included | Dimensions: 25.6" x 11" x 11" | Weight: 29.1 lbs