14 best mtx car audio subwoofers
MTX Audio is a well-known brand in the car audio industry, specializing in producing high-quality car audio equipment, including subwoofers. They offer a range of subwoofer models designed to enhance the bass performance in car audio systems. Here are some key points about MTX car audio subwoofers:
Types of Subwoofers: MTX offers various types of subwoofers, including component subwoofers. Component subwoofers are individual speakers that require an external amplifier to power them. They allow for more customization in setting up a car audio system.
Size and Power Handling: MTX subwoofers come in different sizes, typically ranging from 8 inches to 15 inches in diameter. The size of a subwoofer can affect its output and the frequencies it's best at reproducing. Additionally, each subwoofer model has a specified power handling capacity, which indicates the amount of power it can handle from an amplifier.
Cone Material and Design: MTX subwoofers often feature cones made from materials like polypropylene or other composite materials. The cone design and material can affect the subwoofer's efficiency, durability, and sound quality.
Voice Coil Configuration: Subwoofers can have single or dual voice coils. Dual voice coil subwoofers provide more wiring options and can be wired to different impedance levels, allowing for more flexibility in system design.
Enclosure Type: MTX subwoofers are suitable for various enclosure types, including sealed and ported enclosures. The type of enclosure used can affect the subwoofer's performance in terms of bass response and efficiency.
Sensitivity and Frequency Response: Sensitivity measures how efficiently a subwoofer converts power into sound. Higher sensitivity ratings require less power to produce the same volume as a subwoofer with lower sensitivity.Frequency response indicates the range of frequencies a subwoofer can reproduce.
Installation and Wiring: MTX provides guidelines and recommendations for properly installing and wiring their subwoofers. Following these instructions ensures optimal performance and safety.
Warranty and Support: MTX typically offers a manufacturer's warranty on their subwoofers, providing coverage against defects in materials or workmanship. They may also offer customer support through their official channels.
It's important to note that the specific features and specifications of MTX car audio subwoofers can vary depending on the exact model. For the most accurate and up-to-date information, it's recommended to refer to MTX's official website or product documentation.
Below you can find our editor's choice of the best mtx car audio subwoofers on the market
MTX Audio Terminator Series TNE212D 1,200-Watt Dual 12-Inch Sub Enclosure
MTX
Product description
800 Watt Max Dual 12" Terminator Series Loaded Subwoofer Bass Enclosure
- 5/8" MDF Construction
- Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
- Embroidered Terminator Logo; Impedance: 2Ω
- Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
- Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
- Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle
- Ruggedly constructed using 5/8" MDF and aviation grade black carpet
User questions & answers
| Question: | Could I pus these on a monoblock amp? Or would I have to bridge them myself |
| Answer: | Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1. |
| Question: | Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard |
| Answer: | I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp |
| Question: | anybody had these subs for awhile do they last |
| Answer: | I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day |
| Question: | Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal |
| Answer: | Everything you see, you get...no speaker wires though... |
Product features
MTX TNE212D Dual 12-Inch Sealed Enclosure 2 Ohm
TNE212D Highlights
MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, and 8 Gauge Amplifier Amp Complete Wiring Installation Kit
MTX
Product description
If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.
- ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
- HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
- MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
- AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
- SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
User questions & answers
| Question: | Will this fit a 2011 dodge avanger |
| Answer: | Yes |
| Question: | Will this work in my 2006 chevy equinox |
| Answer: | Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio |
| Question: | What are the dimensions of the subwoofer box |
| Answer: | The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful. |
| Question: | So does this come with the wire or not |
| Answer: | Just got it today. Mine didn't come with the wiring. Very disappointed |
MTX TNP212D2 12" 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, Planet 1500W Mono Amp, and 8 Gauge Amplifier Amp Complete Wiring Installation Kit
MTX
Product description
This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You'll just need to connect everything with the amp kit to add some serious bass to your ride. Make your music rock harder with the help of an amplifier with enough power to take your car audio to the next level. This Planet Audio mono amp can handle 1500 watts of max power, and 563 or 1125 watts of RMS power. It features a continuously variable low pass crossover, low level inputs and outputs, power and protection LEDs, heavy duty set screw style terminals, and chrome plated connections. It has it all. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. This 8 gauge amplifier kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, high-quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. We are an authorized MTX dealer!
- PACKAGE INCLUDES: MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit
- MAXIMUM SOUND QUALITY: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality.
- SUBWOOFER SYSTEM SPECIFICATIONS: 1200 watt max; 400 Watt RMS; Rubber surround; Polypropylene cone; 2-inch aluminum single 4 ohms voice coil; Final impedance: 2 Ohm; Frequency response: 37 150 Hz; 5/8-inch MDF solid construction; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
- AMPLIFIER SPECIFICATIONS: RMS power: 700 watt x 1 channel @ 4 Ohm, 1100 watt x 1 channel @ 2 Ohm, 2500 watt x 1 channel @ 2 Ohm max power, 1500 watt max power; Switchable input sensitivity: 100mV 2V or 2V 8V; Switchable phase shift; Selectable bass boost (0 to +18dB); Signa to noise ratio: 102dB; Frequency response: 20 20KHz; Dimensions (H x W x L): 2.19 x 10 x 10 inches; Remote control included
- INSTALLATION KIT SPECIFICATIONS: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties
User questions & answers
| Question: | Are these better then renegade subs |
| Answer: | Yes |
| Question: | My 2012 acura tl has a stock amp and sub in it, would i have to do anything special if i get this sub |
| Answer: | About 1 3/4 in diameter |
| Question: | Did anyone else have the subs come in a separate delivery than the amp and wiring kit |
| Answer: | yes they are sold in pairs |
| Question: | How do you control how much bass it puts out |
| Answer: | Look up your vehicle on line. It will tell you what will fit. Hopefully these will because they are very nice speakers. Can't be beat for the price. |
MTX Audio TN12-04 12" Single 4 ohm Terminator Series Subwoofer
MTX
Product description
MTX Terminator subwoofers sound as good as they look. Classic MTX subwoofer cosmetics complement this subwoofer that is loaded with engineering technology including Spider Plateau Venting and Asymmetrical Linear Drive System which allow this subwoofer to be loud and play long. If you are looking for a great subwoofer that won't break your bank look no further.
- ALDS Asymmetrical Linear Drive System with a flat progressive spider and extended pole piece for smooth, linear, piston like drive
- Exclusive Spider Plateau Venting cooling system cools at the voice coil
- Rubber surround for greater durability and longetivity of the sub
- 28 oz. Magnet structure
- MTX Audio logo on dust cap
User questions & answers
| Question: | If I buy 2 of these what amp do I need |
| Answer: | Yes, It will work with your Saturn. Thank you |
| Question: | Can 4 of these be hooked up to a 1500 class d 1 ohm stable amp and how would they hold up if they could |
| Answer: | Unless your car has a special plug and play connector, this horn should work on it. Its Basically a positive cable and a negative cable. |
| Question: | Could this fit a 5 3/4 mounting depth sub box |
| Answer: | It will if you make it. It's a universal kit so some assembly required. It's not a factory replacement part. |
| Question: | Is this the replacement for this box? i blew one of mine. mtx audio terminator series tne212d 1,200-watt dual 12-inch sub enclosure. thanks |
| Answer: | Just contact us with order ID and delivery address, we will send you XL-U liner. Best Regards, Liveconn [email protected] |
MTX TNP212D2 12" 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Sound Storm EV 1500W Monoblock A/B Amplifier & Wiring Kit
Product description
This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems. Thunder Bass, Hard hitting Dual 12 inch MTX subwoofers Designed For SPL, Rock your car and the neighborhood! Easy Installation, Mounts quickly in most trunks and SUVs We are an authorized MTX dealer!
- COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Sound Storm EV monoblock amplifier and a complete 8 gauge amp installation wiring kit
- CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
- SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
- CAR AMPLIFIER: Sound Storm EV Monoblock A/B MOSFET power Amplifier delivers 1500 watts MAX x 1 channel @ 2 ohms and RMS power: 563 watts x 1 channel @ 4 ohms; 1125 watts x 1 channel @ 2 ohms; Variable low pass crossover: 40 150Hz; Fixed high pass crossover (200Hz); Variable 0 to +18dB Bass Boost; Dimensions (15.5" L x 10" W x 2 3/8" H); Remote control included
- INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties
User questions & answers
| Question: | Do the subs come with everything needed to make the subs work |
| Answer: | We use the industry standard for 6.5" speakers mounting holes. |
| Question: | Does it fit a 2003 ford escape |
| Answer: | Just one at a time. So you really have to order 2 of them if you need a pair. Sold at unit. |
| Question: | Does it fit in a 1998 jeep xj |
| Answer: | Not if the speaker fits without them. I installed them in the front doors in my old Escort without them and they work fine. |
| Question: | Anyone know the perfect match for the speakers and amp |
| Answer: | 4 ohm's |
MTX TNE212DV 12" 2000W Dual Loaded Car Subwoofers + Box + Planet 2000W Amp + Kit
MTX
Product description
This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212DV combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2Ohm load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 500 watts RMS power, resulting in a power level of 1000 watts RMS/2000 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra-strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems.
- MTX TNE212DV 12" 2000W Car Subwoofer Enclosure
- Dual 12 inch vented enclosure with a single terminal cup
- 2,000 watt of max power, 1,000 watts RMS
- Vented design is tuned for harder hitting base
- Polypropylene dust caps are durable and lightweight, allowing them to use less power
User questions & answers
| Question: | How are the speakers wired in the box |
| Answer: | Hello,we will send you a XL liner free of charge.Please give us your order ID. |
| Question: | Is this a whole package deal? Do I need anything else like more wires to install this |
| Answer: | Hello,you'd better pair it with FreedConn helmet when intercom,we are not ensure the successful connection with other brands when intercom. |
| Question: | What are the dimensions of the sub box |
| Answer: | on the boom mic. |
MTX AUDIO TN1004 10" 600W Car Power Subwoofers Subs Woofers PAIR 4 OHM
MTX
Product description
The classic Terminator car subwoofer bangs out bass in rigs all over the world. Its economical price made it our most popular entry level sub over the last several years. And the Terminator still outperforms any sub in its class. The terminator subwoofer is loaded with MTX engineering technology including Spider Plateau Venting that ensures trouble free performance and an Assymetrical Linear Drive System that limits distortion ensuring unbeatable performance. We are an authorized MTX dealer! 1 Buy = 2 Subwoofers!
- BRAND NEW MTX PAIR TN1004 Terminator Series 10" 600 WATT Car Subwoofer
- MAX Power: 300 Watts ( 600 Watt PAIR)
- RMS: 150 Watts (300 Watt PAIR)
- Impedance: 4 ohm
- Sensitivity: 84 dB
User questions & answers
| Question: | What’s the mounting depth |
| Answer: | Hello,there is a battery included in the package. |
MTX TN10-04 10-Inch Single 4-OHM Subwoofer 150-Watt RMS
MTX
Product description
MTX Terminator subwoofers sound as good as they look. Classic MTX subwoofer cosmetics complement this subwoofer that is loaded with engineering technology including Spider Plateau Venting and Asymmetrical Linear Drive System which allow this subwoofer to be loud and play long. If you are looking for a great subwoofer that won't break your bank look no further.
- ALDS Asymmetrical Linear Drive System with a flat progressive spider and extended pole piece for smooth, linear, piston like drive
- Exclusive Spider Plateau Venting cooling system cools at the voice coil
- Rubber surround for greater durability and longetivity of the sub
- 28 oz. Magnet structure
- MTX Audio logo on dust cap
User questions & answers
| Question: | Do these subs sound better in a sealed box or vented |
| Answer: | Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1. |
| Question: | Will this work in a shallow truck box |
| Answer: | I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp |
| Question: | Is this a slim |
| Answer: | I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day |
| Question: | Is there |
| Answer: | Everything you see, you get...no speaker wires though... |
MTX TNP212D2 12" 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Boss 1100W Mono A/B Amplifier, Wiring Kit and Capacitor
MTX
Product description
The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12-inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1100W monoblock A/B amplifier, wiring kit and 2-farad capacitor. The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. Features Spider Plateau Venting, which is a mechanical cooling process. The enclosure itself is made of extra-strength 5/8-inch MDF. Have everything you need to achieve audio perfection with the included 1100-watt, Monoblock A/B amplifier, 8 gauge wiring kit and 2-farad capacitor as well.
- COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Boss Audio Riot monoblock amplifier, a complete 8 gauge amp installation wiring kit and a 2 farad digital power capacitor
- CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; 1200 watts max power and 400 watts RMS; Rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil; Solid MDF construction; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
- CAR AMPLIFIER: Boss Audio Riot Monoblock A/B MOSFET power Amplifier delivers peak power of 1100 watts, RMS power of 825 watts; 413 watts RMS x 1 at 4 ohms, 825 watts RMS x 1 at 2 ohms, 550 watts MAX x 1at 4 ohms, 1100 watts MAX x 1 at 2 ohms; Bass boost: Switchable or 18 dB; Low Pass Filter: 35 Hz to 160 Hz; Dimensions (L x W x H): 9.125 x 10.4375 x 2.25 inches; Remote control included
- INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties
- POWER CAPACITOR: 2 Farad 20V LED Digital Voltage Car Audio Power Capacitor; Capacitance: 2 farad, 2 million microfarad; High level input voltage: 24; Low level input voltage: 20 volts; Percent capacitance tolerance: 10; ESR: 0.00195 ohms @ 120 Hz @ 25 degrees C; Dimensions: 10.3 x 3 x 3 inches
User questions & answers
| Question: | Does the amp come separately |
| Answer: | In the back seat |
| Question: | What’s the width of them |
| Answer: | 1200wats |
MTX TNP212D2 12" 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter
MTX
Product description
If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You'll just need to connect everything with the amp kit to add some serious bass to your ride. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. This 8 gauge amplifier kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, high-quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. The BOSS B65N High-Level to Low-Level Converter is a hi/low impedance adapter that features an RCA input sensitivity adjustment control. This is perfect if you are looking to add a subwoofer to your current stock head unit that does not include RCA outputs for an amplifier to connect. **We are an authorized MTX dealer!**
- ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
- HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
- MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
- AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal; Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control
- SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
MTX TNE212D 12" 1200W Dual Loaded Subwoofer Box + 1500W Amplifier + Capacitor
MTX
Product description
The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12-inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. This kit comes complete with a 1500W monoblock A/B amplifier and 2-farad capacitor. The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra-strength 5/8-inch MDF. Have everything you need to achieve audio perfection with the included 1500-watt, Monoblock A/B amplifier and 2-farad capacitor as well.
- Loaded subwoofer enclosure
- 1200 watt of max power, 400 watts RMS
- Rubber surround
- Polypropylene cone
- MTX audio logo on dustcap
User questions & answers
| Question: | Will it fit in a 2002 ford ranger extended cab |
| Answer: | Hey man yea my amp came seperately and for some reason the speakers a showed up in two days and it took the amp two weeks |
| Question: | Will this fit inside a 2012 ford fusion |
| Answer: | About 12 inches. |
| Question: | Will it sound loud in a 2004 Jeep Liberty |
| Answer: | Yes. I was able to plug in and bump. Just make sure the amp levels are adjusted |
| Question: | Will this fit inside a 2017 Honda Civic |
| Answer: | should i put this in my 2003 vw gti and had plenty of room |
MTX Magnum MB210SP 10" 400W RMS Dual Car Loaded Subwoofer Box with Wiring Kit
Product description
The Magnum MB210SP is a simple and easy way to add bass to any vehicle system. This amplifier and enclosure package from the makers of MTX Audio is designed to offer excellent price and performance so that anyone can add bass to their music. The amplifier is rated at 1000W max, 250 Watt RMS, 800 Watt Max, 200 Watt RMS subwoofers and 5/8" MDF enclosure. Everything you need for a great bass system is in this package. wires included as well! **We are an authorized MTX dealer!**
- BRAND NEW MTX DUAL 10" 800 WATT Car Subwoofer Enclosure with Amplifier and Amp Kit
- **Subwoofer**:
- 800 Watt MAX
- 200 Watt RMS
- Polymer Coated Pulp Cone
User questions & answers
| Question: | Can you bridge the wires |
| Answer: | There is a special mount that suctions to the windshield and you can leave it there while being able to put the GPS unit on and off of it. |
MTX AUDIO RTP8A 8" 120W Car Loaded Subwoofer Enclosure Amplified Box Vented
MTX
Product description
Don't judge this subwoofer enclosure just by the looks of it. This MTX 8 Inch 120W RMS Amplified Single Vented Subwoofer Enclosure may be small, but it produces giant bass. This bass box is everything you need for a great bass system. It's a convenient size for those who have outgrown having a trunk full of subs. If you are that music enthusiast who wants to experience some bumpin' bass without taking up half of your vehicle, this subwoofer enclosure is right for you. It's a lightweight, durable polypropylene cone with 120 watts of RMS power and uses high or low level inputs making it easy to connect to any system. External Bass Control is included for handy volume control from the front of your vehicle. Get some thumpin' bass in your ride and enjoy your music as you drive with the MTX Subwoofer Enclosure.
- The MTX 8 Inch 120W RMS Amplified Vented Subwoofer Enclosure delivers hard hitting, hard working bass
- Specifications:
- Vented enclosure with integrated amplifier
- Subwoofer Size: 8 inches
- RMS Power Handling: 120 watts
User questions & answers
| Question: | Does it come with the hi input wires for the amp |
| Answer: | Hello! Conversion method: double click volume + button.（Or do this: press and hold the volume "+" button and volume"-" button at the same time before connecting the Bluetooth of the mobile phone to change the automatic or manual answer mode.）.The headset includes both automatic and manual listening functions. |
| Question: | Is there a 10" version of this |
| Answer: | Sorry haven't gotten that far in using this yet. Im having trouble with my music disconnecting after a couple of songs each time I use it. |
| Question: | do i need to run a power supply from my battery for this unit |
| Answer: | Not sure about the exact length but it fits my medium Shoei Qwest helmet just fine with a little room to spare. Talking about cable going from left speaker wrapped around back of helmet to right speaker. |
| Question: | What is the nominal/peak wattage of this |
| Answer: | Direct connect. I connected them to my front door speakers. |
MTX Audio C124 Coustic Car Subwoofer
MTX
Product description
Coustic subwoofers are designed to deliver high performance power at an unbeatable price. Polypropylene cone with excellent stiffness to weight ratio allows for high efficiency and high SPL. Large foam surround increases efficiency by further reducing weight. Available in three sizes, 15", 12" and 10", the all new Coustic subwoofers offer a solution for any enthusiast at an extreme value.
- Light Weight, High Efficiency Paper Cone
- Foam Surround
- Stamped Steel Basket
- Xmax: 0.335-Inch
User questions & answers
| Question: | Are they d4s or svc 8ohm or 4ohms? Whats the rms? What kind of coil copper or aluminum or cca? How many oz magnet |
| Answer: | Yes |
| Question: | Is this a 15 inch sub |
| Answer: | Yea it will |
Latest Reviews
View all
Bissell Enzyme Cleaners
- Updated: 09.05.2023
- Read reviews
Braun Oral Irrigators
- Updated: 25.03.2023
- Read reviews
Home Video Games
- Updated: 03.06.2023
- Read reviews
Winter Jackets
- Updated: 24.03.2023
- Read reviews
Fellowes Mouse Pads
- Updated: 10.05.2023
- Read reviews