11 best mtx 12 subwoofers
MTX is a well-known brand in the car audio and electronics industry, and they are recognized for producing a variety of audio equipment, including subwoofers. The "MTX 12" subwoofers typically refer to 12-inch subwoofer units designed for use in car audio systems. Here's what you should know about MTX 12-inch subwoofers:
Size: The "12" in MTX 12 subwoofers refers to the size of the subwoofer's cone. These subwoofers have a 12-inch diameter cone, which is a common and popular size in car audio. Larger cones generally produce deeper and more powerful bass.
Component Subwoofers: MTX 12 subwoofers are often categorized as component subwoofers. This means they are designed to be installed separately from the main speakers and are typically used to handle low-frequency (bass) audio frequencies. Component subwoofers provide greater flexibility in designing and customizing a car audio system.
Power Handling: MTX subwoofers, including the 12-inch models, come with specific power handling ratings. These ratings indicate the amount of power (in watts) that the subwoofer can handle safely without distortion or damage. It's important to match the subwoofer's power handling with an appropriate amplifier for optimal performance.
Enclosure Type: To get the best sound from a 12-inch MTX subwoofer, it's essential to choose an appropriate enclosure type. MTX subwoofers can be used in sealed enclosures (for precise and tight bass) or ported enclosures (for louder and deeper bass). The choice of enclosure type affects the subwoofer's performance characteristics.
Sensitivity: Sensitivity ratings of MTX 12 subwoofers indicate how efficiently they can convert power into sound. Higher sensitivity means the subwoofer can produce more sound with less power, making it a good match for lower-powered amplifiers.
Impedance: The impedance of the subwoofer (typically measured in ohms) affects the compatibility with amplifiers. MTX subwoofers are available in different impedance options, allowing users to choose the one that suits their amplifier's capabilities.
Subwoofer Series: MTX offers various series of subwoofers, each with its own design and performance characteristics.Common series include the Thunder, Terminator, and JackHammer, among others. The specific features and specifications may vary depending on the series.
Installation: Installing MTX 12 subwoofers typically involves mounting them in a suitable enclosure within the vehicle's trunk or cabin. Proper installation is crucial to achieving optimal sound quality and avoiding damage to the subwoofer.
MTX 12-inch subwoofers are popular choices for car audio enthusiasts who want to enhance their in-car audio experience with deep, powerful bass. To ensure the best performance and compatibility with your vehicle and audio system, it's important to consult the product specifications and possibly seek professional installation or advice if needed.
Below you can find our editor's choice of the best mtx 12 subwoofers on the marketProduct description
800 Watt Max Dual 12" Terminator Series Loaded Subwoofer Bass Enclosure
- 5/8" MDF Construction
- Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
- Embroidered Terminator Logo; Impedance: 2Ω
- Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
- Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
- Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle
- Ruggedly constructed using 5/8" MDF and aviation grade black carpet
User questions & answers
Question: | Could I pus these on a monoblock amp? Or would I have to bridge them myself |
Answer: | Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1. |
Question: | Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard |
Answer: | I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp |
Question: | anybody had these subs for awhile do they last |
Answer: | I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day |
Question: | Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal |
Answer: | Everything you see, you get...no speaker wires though... |
Product features
MTX TNE212D Dual 12-Inch Sealed Enclosure 2 Ohm
TNE212D Highlights
Product description
If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.
- ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
- HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
- MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
- AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
- SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
User questions & answers
Question: | Will this fit a 2011 dodge avanger |
Answer: | Yes |
Question: | Will this work in my 2006 chevy equinox |
Answer: | Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio |
Question: | What are the dimensions of the subwoofer box |
Answer: | The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful. |
Question: | So does this come with the wire or not |
Answer: | Just got it today. Mine didn't come with the wiring. Very disappointed |
Product description
MTX Terminator subwoofers sound as good as they look. Classic MTX subwoofer cosmetics complement this subwoofer that is loaded with engineering technology including Spider Plateau Venting and Asymmetrical Linear Drive System which allow this subwoofer to be loud and play long. If you are looking for a great subwoofer that won't break your bank look no further.
- ALDS Asymmetrical Linear Drive System with a flat progressive spider and extended pole piece for smooth, linear, piston like drive
- Exclusive Spider Plateau Venting cooling system cools at the voice coil
- Rubber surround for greater durability and longetivity of the sub
- 28 oz. Magnet structure
- MTX Audio logo on dust cap
User questions & answers
Question: | If I buy 2 of these what amp do I need |
Answer: | Yes, It will work with your Saturn. Thank you |
Question: | Can 4 of these be hooked up to a 1500 class d 1 ohm stable amp and how would they hold up if they could |
Answer: | Unless your car has a special plug and play connector, this horn should work on it. Its Basically a positive cable and a negative cable. |
Question: | Could this fit a 5 3/4 mounting depth sub box |
Answer: | It will if you make it. It's a universal kit so some assembly required. It's not a factory replacement part. |
Question: | Is this the replacement for this box? i blew one of mine. mtx audio terminator series tne212d 1,200-watt dual 12-inch sub enclosure. thanks |
Answer: | Just contact us with order ID and delivery address, we will send you XL-U liner. Best Regards, Liveconn [email protected] |
Product description
Packages Includes:
1 x 12" MTX Subwoofer
1 x Vented/Ported Enclosure Sub will need to be wired and placed into box ----------------------------------- **We are an Authorized MTX and Q-Power Dealer!** The classic Terminator car subwoofer bangs out bass in rigs all over the world. Its economical price made it our most popular entry level sub over the last several years. And the Terminator still outperforms any sub in its class.
The MTX TN12-02 is a 12" single voice coil, 2 Ohm, 200 watt subwoofer that is economically priced but not short on performance.
The terminator subwoofer is loaded with MTX engineering technology including Spider Plateau Venting that ensures trouble free performance and an Assymetrical Linear Drive System that limits distortion ensuring unbeatable performance.
If you are looking for a great subwoofer that won't break your bank look no further. The Terminator sub is still one badass bass pounder... The **Q POWER 12"** Single Heavy Duty Vented Subwoofer Enclosure features solid 5/8" MDF construction, charcoal carpet covering, a dual vented design, and terminal cup connectors. Turn your ride into a sound machine with the help of the Q POWER 12" Single Heavy Duty Vented Subwoofer Enclosure! Purchase the **Q POWER 12"** with VMInnovations and receive free shipping! If you want the most output for your money, this is the way to go. Q Power provides top quality speaker boxes and accessories, and the QPower QSBASS12 is no exception!
- RMS Power (Watts): 200 Watts
- Recommended Amp Power (RMS): 100
- 200 Watts
- Peak Power (Watts): 400 Watts
- ALDS Asymmetrical Linear Drive System with a Flat Progressive Spider and Extended Pole Piece for Smooth, Linear, Piston like Drive
Product description
800W Peak (400W RMS) 12" 55 Series Dual 2 Ohm Subwoofer
- 800W Peak
- 400W RMS
- Polypropylene Cone
- Rubber Surround
- Spider Plateau Venting Mechanically Cools the Voice Coil
User questions & answers
Question: | How many ohms is each voice coil |
Answer: | 2. 2 coils at 2 ohms each, making possible a 4 ohm load or a 1 ohm load when only 1 woofer is being used. |
Question: | Does this come with 2 or only 1 subwoofer |
Answer: | It will only come with 1 subwoofer. |
Question: | will a kicker cx300.1 be sufficient for this subwoofer?, i dont want to burn up my amp or sub |
Answer: | this amp will be good for only one sub |
Question: | What is the rms |
Answer: | 400rms |
Product description
If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. You'll just need to connect everything with the amp kit to add some serious bass to your ride. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. This 8 gauge amplifier kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, high-quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 6 feet of split loom tubing, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal. The BOSS B65N High-Level to Low-Level Converter is a hi/low impedance adapter that features an RCA input sensitivity adjustment control. This is perfect if you are looking to add a subwoofer to your current stock head unit that does not include RCA outputs for an amplifier to connect. **We are an authorized MTX dealer!**
- ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
- HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
- MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
- AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal; Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control
- SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
Product description
The MTX TNP212DV 12 Inch 2000 Watt Dual Loaded Subwoofer Box Enclosure delivers unforgettable bass with the perfect combination of 12 inch subs, monoblock amp, and a box to boot. This dual 12 inch vented enclosure has a single terminal cup showing a final 2 ohm impedance load to any connected amplifier. The built in Terminator subwoofers feature durable, light polypropylene dust caps that stand up to the rigors of most trunks while using less power. Each subwoofer can handle 500 watts RMS power, resulting in a power level of 1000 watts RMS or 2000 watts max for the entire enclosure. The box measures 29.5 x 13.5 x 11 x 14 inches and is constructed with 0.625 inch MDF with tough carpet covering. Also included is the MTX Bass Control Knob. Hook this control box up to your car audio amplifier using the 1-wire connecting cable and customize your booming bass with the easy-to-use knob controller. Adjust your bass conveniently from your dash without having to reach for the amplifier. This remote bass controller is compatible with MTX amplifier THUNDER and WET series monoblock channel models including THUNDER1000.1, THUNDER500.1, and WET500.1. Easily mount the bass knob box with the integrated side slots and the included hardware. The TNA500D is a 500 watt class D amplifier designed specifically to fit with this car audio setup so you'll be 1 step close to audio perfection right out of the box.
- MTX AMPLIFIER: MTX 12-Inch 2000W Dual Loaded Subwoofer Enclosure with Amplifier; Dual 12 inch vented enclosure with a single terminal cup
- POWERFUL SYSTEM: 2,000 watt of max power, 1,000 watts RMS; Vented design is tuned for harder hitting base
- DUST CAPS: Polypropylene dust caps are durable and lightweight, allowing them to use less power; Enclosure measures 29.5 x 13.5 x 11 x 14 inches; 0.625 inch solid MDF construction
- BASS CONTROL KNOB: MTX MWA040 External Bass Control Knob for THUNDER and WET Car Audio Amplifier; External bass control knob provides customizable bass for your optimal sound experience
- TOTAL CONTROL: Allows you to control your bass from the dash without having to reach for the amplifier; Simple 1-wire connection gets you up and running in a flash; Compatible with MTX amplifier THUNDER and WET series monoblock channel models: THUNDER1000.1, THUNDER500.1, and WET500.1
Product description
Outstanding Value Incredible Bass and Design Extra Space Bass The 35 Series shallow subwoofers utilize technologies found in other MTX subwoofers to deliver exceptional bass in a variety of applications. Its shallow mount design make it perfect for tight spaces where you still need bass. The 3512-04S The 3512-04S is a 12" single voice coil, 4Ω, 300-watt shallow mount Car Audio Subwoofer designed to deliver outstanding SPL and sound quality in an affordable combination of state-of-the-art MTX technologies. More Than You Expect The 3512-04S is the ideal subwoofer for audio enthusiasts that don't want to sacrifice space in their vehicle, but still want their sound to bump. Designed for sealed enclosures, this subwoofer is perfectly deployed in pick up trucks, sports cars, or any daily driver that has a trunk full of life's stuff. A great value, this subwoofer continues the MTX tradition of getting More Than Xpected. The MTX Inverted Apex Surround This subwoofer features a new Inverted Apex surround that increases surface area allowing for more air movement and higher SPL, and a progressive suspension that lowers distortion resulting in improvLow profileed sound quality. This subwoofer also incorporates Spider Plateau Venting which is a mechanical cooling process that targets cool air at the voice coil effectively managing the temperature for long term performance. Great For Upgrades 35 Series subwoofers are ideal for improving the sound in any vehicle. Their low profile does not require a large enclosure so they are perfect for most vehicles.
- 12" 4 Ohm SVC Subwoofer
- 300 Watts RMS / 600 Watts Peak Power
- 3.375" Mounting Depth
- Frequency Responce 23Hz - 130Hz / Sensitivity 84.4db (1W/1m)
- Expanded Surface Area Allows for Increased Volume Displacement and SPL
Product description
These 2 MTX TNP212DV 12 Inch 2000 Watt Dual Loaded Subwoofer Box Enclosures each delivers unforgettable bass with the perfect combination of 12 inch subs, monoblock amp, and a box to boot. This dual 12 inch vented enclosure has a single terminal cup showing a final 2 ohm impedance load to any connected amplifier. The built in Terminator subwoofers feature durable, light polypropylene dust caps that stand up to the rigors of most trunks while using less power. Each subwoofer can handle 500 watts RMS power, resulting in a power level of 1000 watts RMS or 2000 watts max for the entire enclosure. The box measures 29.5 x 13.5 x 11 x 14 inches and is constructed with 0.625 inch MDF with tough carpet covering. The TNA500D is a 500 watt class D amplifier designed specifically to fit with this car audio setup so you'll be 1 step close to audio perfection - right out of the box.
- Loaded enclosure
- Dual 12 inch vented enclosure with a single terminal cup
- 2,000 watt of max power, 1,000 watts RMS
- Vented design is tuned for harder hitting base
- Polypropylene dust caps are durable and lightweight, allowing them to use less power
Product description
MTX S6512-44 The S6512-44 is a 12" dual voice coil, 400 watt, 4 ohm subwoofer built on the MTX tradition of getting more than expected. BUILT FOR SPL S65 Series Subwoofers are built to deliver exceptional SPL and the most bass for your buck THE S65 SERIES: The S65 Series is designed for enthusiasts that want to add extreme bass to their system. With more surface area than a standard round subwoofer and patented corner geometry that increases Xmax, the S6512-44 delivers exceptional volume displacement that translates to exceptional SPL. The woofer features dual layer cooling technology with Spider Plateau Venting technology that utilizes the subs movement to cool it as it plays and a radial ribbed t-yoke dissipates heat away from the voice coil through the back plate, so it doesn't overheat even under intense use. KEY FEATURES: Patented Surround Geometry US Patent #7,275,620 Surround Allows for Increased Xmax Resulting In Higher SPL and Volume Displacement Spider Plateau Venting Mechanically Targets Cool Air at the Voice Coil Radial Ribbed T-Yoke Dissipates Heat and Decreases Distortion 2.0" High Temperature Voice Coil S65 SERIES SPIDER PLATEAU VENTING. This subwoofer also incorporates Spider Plateau Venting which is a mechanical cooling process that targets cool air at the voice coil and a radial ribbed t-yoke that acts as a heat sink effectively managing the subwoofer temperature for long term performance. Progressive Suspension Controls excursion at high power lowering 3rd order distortion.
- Impedance: Dual 4 Ohm
- RMS Power Handling: 500 Watts, Peak Power 1000 Watts
- 2" Voice Coil
- 12" Square Subwoofer
User questions & answers
Question: | If i buy 2 s6512-44 what kind of mtx amp do i need |
Answer: | You can put it both places because I put my printer on top of mine. |
Product description
If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. So get the party started in your car and add some bass with the MTX Party Pack.
- MTX 12 inch 1200 watt dual bass package
- Box content:
- 2 MTX subwoofers
- MTX subwoofer enclosure
- MTX Terminator TNA251 amp
Latest Reviews
View all
Gopro Hand Grip
- Updated: 29.05.2023
- Read reviews

Ddi Insulated Kids Water Bottles
- Updated: 20.02.2023
- Read reviews

Mandolin Vegetables
- Updated: 11.01.2023
- Read reviews

Shooting Bag Fortune Cookie
- Updated: 28.05.2023
- Read reviews

Pool Thermometer
- Updated: 06.02.2023
- Read reviews