10 best kicker 10 inch car subwoofers

Product description

Powerful subwoofers are the backbone of any serious car audio setup, which is why serious audiophiles turn to the Kicker CompC 10 Inch 500 Watt 4 Ohm DVC Subwoofer when they want awesome sound. This sub has a mounting depth of 4.81 inches and a mounting diameter of 9.125 inches. Intended for sealed boxes with between 1.0 and 2.4 cubic feet of volume, or in vented boxes with 1.25 to 1.75 cubic feet of volume, this sub's 250 watts of RMS power and 4 ohms of impedance are sure to give your vehicle the powerful, rich sound you're after. This sub also features an injection molded polypropylene cone, high temperature voice coil plus perimeter venting for heat management, ribbed polyurethane surround, and spring loaded speaker terminals.

User questions & answers

Question:	Could i use a 1000.2 planet audio amp for 2 of these
Answer:	No RCA is pre-amp outputs, you need to use the subwoofer output on your amp. If you want to connect your RCAs you need a powered subwoofer that has an included amp
Question:	do these come with any kind of speaker grill
Answer:	I’m not sure, it’s possible it’s not that big I have it in an Infiniti m35 trunk and still have room
Question:	How much airspace is required for a sealed box
Answer:	You can power this with a home amplifier. However, might be cheaper/easier to purchase a powered home subwoofer.
Question:	What is the mounting depth
Answer:	Sure, I have a pioneer 1000w driving mine.

Product description

Description of RXD-M1:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXD-M1 is a mono amplifier with 2,000 watts peak output and 500 watts CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

Description of RWK41:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

• Package Includes:. KICKER 48TCWRT102 CompRT 10" 800w Slim Car Subwoofer+Sub Box Enclosure COMPRT12. Rockville RXD-M1 2000w Peak/500w CEA RMS Mono 1 Ohm Amplifier Car Audio Amp. Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
• Specifications of 48TCWRT102: Woofers (in, cm): 10. Impedance (Ohms): 2. Recommended Amp Power (watts RMS): 400. Peak Power Handling (watts): 800. Sensitivity (dB 1w/1m): 96.2. Enclosure Top Depth (in, cm): 3-1/2, 8.8. Enclosure Bottom Depth (in, cm): 6-1/2, 16.6. Enclosure Height (in, cm): 11-3/4, 30. Enclosure Width (in, cm): 23-1/4, 59.1
• Features of RWK41: 1 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Features of RXD-M1: Rockville RXD-M1 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 500 Watts x 1 Channel <1% THD+N. 2 Ohm 350 Watts x 1 Channel <1% THD+N. 4 Ohm: 250 Watts x 1 Channel <1% THD+N).
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1 Ohm: 2000 Watts x 1 Channel. 2 Ohm 1400 Watts x 1 Channel. 4 Ohm: 1000 Watts x 1 Channel

User questions & answers

Question:	Can iconnect this to my Rockville rpg 10 inch bluetooth speaker
Answer:	As long as you have a hotspot, Google Maps will work real time though several GPS. You can also download your area's free map so that if you don't have an internet connection on the road then maps will still work. A phone with a hotspot is the way to go.
Question:	Will a 1100 watt monblock on 2 of these be ok
Answer:	I mounted the GPS antenna on the dash near the windshield. My dash (Freightliner M2) slopes down slightly to the windshield so they're not really noticeable. It also made routing the wires easy.
Question:	I want to buy the box to replace the subwoofer for pyle 1000 watt and my question is if the box is compatible with my pyle 1000 watt
Answer:	Hello, this stereo does not support playing discs, but it supports USB storage to play video music
Question:	Would a 2100 watt amp blow it
Answer:	Yes but they are subwoofers and you would need something to drive the upper scale

Product features

Pyle PLQB10 10-Inch 500 Watt Bandpass

• One 10'' High Power 4 Ohm Subwoofer
• Blue Polypropylene Cone
• Specially Treated Black Rubber Edge Suspension
• 2'' Aluminum Voice Coil
• Bandpass Alignment For Extra Deep Bass
• Plexiglass Front Window
• 500 Watts Max Power Handling
• Frequency Response: 30Hz-700k Hz
• Dimensions: 12''H x 12''W x 17''D

Product description

The CompVR 10 Inch Subwoofer is a 2 ohm dual voice coil design, built for easy wiring. The CompVR gets earth shattering bass to you by engineering a stable base and a cool, powerful motor. Powerful magnets and dual high temp voice coils move a stiff polypropylene cone, while perimeter venting keeps the air moving around the motor. You get strong bass that keeps on bumping day in – day out. The CompVR 10 Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.

• 10-INCH SUBWOOFER: One Kicker CompVR round 10 Inch Car Audio Subwoofer for serious bass power
• 700 WATTS MAX POWER: MAX Power Handling: 700 Watts; RMS Power Handling: 350 Watts
• DUAL VOICE COIL: Dual voice coil 2ohm impedance, 83.6 dB sensitivity, 30 - 500 Hz frequency response; High temp coil wire and strong steel basket with coil cooling perimeter venting
• POLYPROPYLENE CONE: Features super rigid, injection molded polypropylene cone with 360 degree back bracing; Ribbed and double stitching on surround for strength at high excursion
• SPECIFICATIONS: Mounting Depth: 5.5"; Mounting Diameter: 9 3/16"; Min Sealed Box Volume: .8 cu. ft.; Max Sealed Box Volume: 3 cu. ft.; Min Vented Box Volume: 1.25 cu. ft.; Max Vented Box Volume: 1.75 cu. ft.; Manufacturer warranty: 1-year warranty

User questions & answers

Question:	Does it come with the screws
Answer:	Yes comes with hardware very nice subwoofers
Question:	Will it fit in kicker ported slim box
Answer:	Hard to say read the tech sheets for both sub and box
Question:	Mounting depth
Answer:	Mounting depth is 5-1/2 inches or roughly 14 cm.
Question:	Where can I find the Specs for this speaker
Answer:	Kickers web sight

Product description

Kicker 43C104 Comp 10" 300 Watt SVC 4-ohm Car Audio Subwoofer Woofer Sub C104

• 10-INCH SUBWOOFER: One Kicker Comp 10 Inch Car Audio Subwoofer for serious bass power
• 300 WATTS MAX POWER: MAX Power Handling: 300 Watts; RMS Power Handling: 150 Watts
• SINGLE VOICE COIL: Single voice coil 4 ohm impedance, 86.2 dB sensitivity, and 30 - 500 Hz frequency response; High temp coil wire and strong steel basket with coil cooling perimeter venting
• RIGID INJECTION MOLDED CONE: Features super rigid, injection molded cone with 360 degree back bracing; Ribbed and double stitching on surround for strength at high excursion
• SPECIFICATIONS: Mounting depth: 5.06 inches; 45 ounce magnet structure; Vented pole piece for heat dissipation; Durable spiraled tinsel leads; Spring loaded terminals; Weight: 9 pounds; Manufacturer warranty: 1-year warranty

User questions & answers

Question:	I want to Iso-seal these subs. Will the cones on these subs handle that kind of set up
Answer:	Yes, they will work either way. I have them in a sealed enclosure in my sons car.
Question:	Is a 1.0 cubic feet sealed box for under the rear seats be ok for 2 of these
Answer:	No, you need to build a larger box, than one cubic foot
Question:	would it sound good on a 1000 watt sony xplod
Answer:	I believe so. I have a 400watt Blaupunkt bridged and it sounds great. It is in the back of a Jeep Wrangler unlimited
Question:	What's the mounting depth
Answer:	According to Crutchfield, the top mount depth is 5". Bottom mount N/A, I guess due to the outside frame.

Product description

Description of 44CWCD104: Huge value. High performance. The dual-voice-coil KICKER CompC delivers a new level of wiring flexibility to get the most out of your CX Series amplifier. Protected by a UV coated polyurethane surround, the CompC sub delivers powerful bass without breaking the bank. Matched with a CX series amplifier, you get the ultimate combination of power and affordability, as only KICKER can deliver.

• Features of 44CWCD104: KICKER 44CWCD104 CompC 10" 500 Watt Dual 4-Ohm Car Audio Subwoofer Sub CWCD104
• Dual Four-Ohm Voice Coil, Injection-Molded Polypropylene Cone, Perimeter Venting for Thermal Management
• Ribbed Polyurethane Surround, Signature Yellow Surround Stitching, High-Strength Spiralead Tinsel Leads
• Stamped Steel Basket, High Temp Voice Coil, Spring-Loaded Speaker Terminals
• The CompC 10-Inch Subwoofer works best with a sealed or ported enclosure and 250 watts of recommended power

User questions & answers

Question:	What’s a good amp to run with these subs
Answer:	You can hook up anything that has a head phone jack or audio out
Question:	Does it only come with one speaker
Answer:	No where there is no aux cable but u can use the RCA Stereo Audio Cable
Question:	Cuántas libras pesan
Answer:	My brother use this with a usb stick. Not with a audio mixer
Question:	this is for 2 subs correct
Answer:	110-Volts AC
Question:	will this fit in a 2016 Acura ILX
Answer:	I used the installation template. The holes where cut in 3/8 fiberglass with a router (fine bit edge)
Question:	Will this fit in my 1999 Dodge Neon
Answer:	I havent had any actual mud on mine but it has been exposed to water several times. I put one in a speaker cooler that I take river rafting and have not had an issue. Just be sure to put the grill on it for protection.
Question:	Can I return just the amp and wiring kit
Answer:	Any 10 inch hole. If you had a 10in speaker already this should fit
Question:	Also what is the best turn for the amp
Answer:	I have these speakers and the grill can be removed.

Product description

Kicker 44CVX102 Comp VX CVX 10 2400 Watt Car Subwoofers

• Features: Kicker 44CVX102 Comp VX CVX 10" 1200 Watt Car Subwoofer Sub CVX10-2 44CVX10-2. Dual Two-Ohm Voice Coils. Thick Polypropylene Cone. Signature Double Blue Surround Stitching. Ribbed Santoprene Surround. SoloKon Cone Reinforcement. Oversized Suspension System
• High-Strength Insulated Tinsel Leads. High Temp Voice Coil. Perimeter Venting for Thermal Management. Massive Ceramic Magnet. UniPlate Extended Pole Piece & Backplate For Superior Heat Dissipation. Cast Aluminum Basket. Satin Nickel Spring-Loaded Speaker Terminals. Specifications: Size: 10" (25 cm)
• Impedance: 2 Ohms DVC. Power Handling: 1200 Watts Peak / 600 Watts RMS. Sensitivity: 85.7 dB 1w/1m. Frequency Response: 24 Hz - 500 Hz. Mounting Depth: 5-15/16" (15.1 cm). Mounting Cutout: 9-3/16" (23.3 cm). Min Sealed Box Vol: 0.8 cu. ft (22.7 L). Max Sealed Box Vol: 3.0 cu. ft (85.0 L)
• Min Vented Box Vol: 1.25 cu. ft (35.4 L). Max Vented Box Vol: 1.75 cu. ft (49.6 L). What's in the box: one 10-inch subwoofer, one owner's manual, two stickers

Product description

This Package Includes: 1 x Kicker 44TCWC104 10" Enclosed Subwoofer 1 x Planet Audio 1500 Watt Amplifier 1 x 4 Gauge Wiring Kit High performance CompS Loaded Enclosures are factory tuned and vented for loud, great sounding bass ready to install into a vehicle. Whether it's a single or dual sub enclosure that refuses to quit, or a thin profile box that fits a pickup truck cab perfectly, high output CompS Loaded Enclosures provide the most intense bass at the greatest value. This is ready made KICKER bass that installs in minutes. Equipped with proven box construction and an impressive bold look, the 10 and 12 inch dual enclosures offer a pair of CompS woofers in a stout MDF box with rounded corners and internal bracing for additional strength and support. A single 12 inch subwoofer is available for under a back hatch, and the 10 inch thin profile enclosure is perfect for behind the seat or wherever space limitations exist. All enclosures are covered in plush, charcoal gray carpeting with yellow branding. Slot vents help create ultimate volume. CompS Subwoofers are founded on engineering that is tried and true, building upon the success of the KICKER's original Competition Series from 1986. They are equipped with a lightweight, injection molded polypropylene cone and tough, ribbed polyurethane surround for eliminating flex and distortion. The **PLANET AUDIO AC1500.1M** 1500W MONOBLOCK Car Audio Amplifier can handle 1500 Watts of MAX power. It features a Continuously Variable Low Pass Crossover, Low Level Inputs and Outputs, Power and Protection LEDs, Heavy Duty Set Screw Style Terminals, Chrome Plated Connections, and an Illuminated Logo. Choose the **PLANET AUDIO AC1500.1M** 1500W MONOBLOCK Car Audio Amplifier to power your car audio system! @[video](MRzkUJK2Ez4) @[video](NYmCGUEoG2I)

• **Subwoofer:**
• Kicker 10 Inch 600 watt vented thin profile subwoofer enclosure
• RMS power: 300 watts
• Max power: 600 watts
• Impedance: 4 ohm

Product description

Our Kicker L7 Packages are professionaly grouped to ensure you're getting the most bang for your buck. Have the peace of mind know you'll be getting everything you need to have an amazing Kicker L7 powered system.

This Package Includes

• 2 x Kicker 46L7T104 Car Audio L7T Shallow Mount 10" Sub Square L7 Subwoofer L7T104

• Kicker L7T 10" Shallow Mount Square Subwoofers (46L7T104)

User questions & answers

Question:	What size amp would be best for these subs
Answer:	Both box and sub are complete garbage. I put a 500rms sub in it (because the pyle blew) and the box broke :| the box opened up from every angle. Came apart mostly
Question:	Is the dvc or svc
Answer:	If you were to tune the amp using math to calculate the max power output the amp will output, you could have this installed in a 2100 watt system and NOT blow it up or damage it in any way. So the answer depends on how much of the 2100 watts is being pushed through the speaker in question. 2100 watts (full power) would destroy the voice coil in this case.
Question:	What amp is good mono or 2ch
Answer:	They will sound good but the glue arond the spider came off all 4 of mine in a little over an hour. Better off buying a better brand.

• 10 INCH SQUARE SUBWOOFER: Kick up your car audio with the Kicker L7S Solo Baric 10 Inch Square Subwoofer featuring a square design for more cone area, air displacement, and volume
• 1200 WATT POWER: 1200 watts peak power; 600 watts RMS power
• DUAL VOICE COIL: 4 ohm, dual high temp voice coils, 86.8 d B sensitivity and 24 - 100 Hz frequency response
• RIBBED SANTOPRENE SURROUD: Features injection molded polypropylene cone and patented ribbed corners and santoprene surround with blue surround stitching to minimize distortion and add control
• SPECIFICATIONS: 360 degree SoloKon back bracing; UniPlate back plate and pole piece and perimeter venting for thermal management; Thick tinsel leads, large ceramic magnet, and cast aluminum basket; Satin nickel plated, spring loaded speaker terminals; Mounting depth: 6.25 inches; Mounting cut out: 9.31 inches; Manufacturer warranty: 1-year warranty

User questions & answers

Question:	Can this subwoofer be installed in a seal box
Answer:	15inch or 38.2cm
Question:	What amp do i need to power 2 of them
Answer:	No it doesn't. They are around 30 dollars. Highly recommend buying one.
Question:	Can the dual 4 ohm be used to get 1 ohm
Answer:	I have mine in a 1987 power ram, but I have separate passenger and driver seats with center console. It fits behind the passenger seat but it has to be adjusted forward quite a bit. If you have corner speakers the width will extend past the seat back and center console may need to be moved forward.
Question:	Whats the difference in these subs versus kicker s1074 10" 1200W 4-0hm
Answer:	PORTED (vented)... not sealed...

Product features

KICKER L7S 8" DVC

2 Ohm Model: 44L7S82

4 Ohm Model: 44L7S84

KICKER L7S 10" DVC

2 Ohm Model: 44L7S102

4 Ohm Model: 44L7S104

KICKER L7S 12" DVC

2 Ohm Model: 44L7S122

4 Ohm Model: 44L7S124

KICKER L7S 15" DVC

2 Ohm Model: 44L7S152

4 Ohm Model: 44L7S154

Product description

Peak Power: 800 Watts RMS Power: 400 Watts Impedance: Dual 4 Ohm Sensitivity: 83.6 dB 1w/1m Frequency Response: 25-500 Hz Mounting Depth: 6-1/4" Mounting Cutout: 11" Recommend Sealed Box Volume: 1.00 - 4.60 Cubic Feet Recommend Vented Box Volume: 1.75 - 2.25 Cubic Feet Best woofer in its class, and cornerstone of KICKER bass High performance and power handling with superior bass technology Super-rigid, injection-molded cone with 360-degree back bracing High-mass solid pole piece for removing potentially damaging heat High-temp coil wire Strong steel basket with coil-cooling perimeter venting Ribbed Santoprene surround for strength at high excursion Durable Spiralead tinsel leads Tough double-stitching on surround Handy spring-loaded terminals

• RMS Power Output (Watts): 400W
• Maximum Power Output (Watts): 800W
• Sensitivity: 83.6 DB 1w/1m
• Frequency Response: 25-500 Hz

User questions & answers

Question:	how do ya wire both coils ,ones with the white dots together
Answer:	I dont know, but I would say no.
Question:	Will a hifonics 1800watt amp work since it says it runs 650 watts at 4 ohms
Answer:	Best amp for this is Kicker Kx amps i have this currently on my car right now i have a 2015 kia optima... Nothing but Kicker product from front to back... I have the 2 10's Kicker compR 2016 edition with the Kicker Kx amp 800.1 and amp kit Kicker 4gauge OFC... I have the bass remote and nothing but legendary bass its a beefy box... Kicker compR are the best marriage with Kicker Kx amp... More i for at kicker.com..... Thats how i find out which all subs fit to anps
Question:	What would be a good cheap/durable amp to power two of these subs
Answer:	You can with an aux cable with one open end , that’s means one end with the wires exposed to connect to speaker ,
Question:	Max watts
Answer:	if your refering to a amplifier at 1100 watts its ok to use however you just want to make sure you don't turn it up pass the speakers power handling point or your will damage the speaker it self. you also want to look at how many watts your amp kicks out in (RMS). THAT WOULD BE THE TRUE POWER WATTAGE. OH AND MAKE SURE YOUR 1100 MONBLOCK IS COMPATABLE WITH 4OHM SPEAKERS AS WELL. remember any time you have a amp or reciever that is higher than the speaker power handling and the ohm capability matches you can use. just dont turn it full max because the amp kicks out more power than the speaker can handle which is good i would say because that insures you will get the best sound provided the speaker is a quality speaker to began with