6 best car woofers
Car woofers, specifically component subwoofers, are an integral part of car audio systems, designed to reproduce low-frequency sounds and enhance the overall audio experience. Here's what you need to know about them:
Component Subwoofers:
- Component subwoofers are a type of speaker designed exclusively for reproducing low-frequency audio, such as bass and sub-bass tones.
- Unlike full-range speakers that handle a wide range of frequencies, component subwoofers are specialized for deep, powerful bass output.
- They consist of three main components: the subwoofer driver, the enclosure or box, and an amplifier.
Subwoofers:
- Subwoofers are categorized by their size, typically measured in inches (e.g., 8-inch, 10-inch, 12-inch, 15-inch, etc.). Larger subwoofers generally produce deeper bass tones.
- They come in various configurations, including single voice coil (SVC) and dual voice coil (DVC), allowing for flexibility in wiring and connecting to amplifiers.
- Subwoofers are capable of moving a significant amount of air, creating the deep, rumbling bass that is often felt as much as heard.
Car Audio:
- Car woofers are a crucial component of car audio systems, enhancing the overall sound quality by reproducing low-frequency sounds that other speakers cannot handle effectively.
- They are commonly installed in the trunk of a car or in custom-built enclosures within the vehicle.
Car Electronics and Vehicle Electronics:
- To power component subwoofers effectively, a car audio system typically includes a dedicated amplifier. This amplifier provides the necessary power to drive the subwoofer and produce powerful bass.
- Car woofers are connected to the car's head unit (stereo) or a separate audio processor through wiring, allowing for control of bass levels and frequency response.
Electronics:
- Subwoofers are constructed using advanced materials and technologies, including various cone materials (e.g., paper, polypropylene, carbon fiber), voice coil types, and magnet structures to optimize sound quality and durability.
- Many subwoofers are designed with high excursion capabilities, meaning they can move their cones a significant distance, producing deep bass notes with clarity.
- Some subwoofers include additional features like dual-voice coils, built-in enclosures, and adjustable crossovers to fine-tune their performance.
In summary, car woofers, specifically component subwoofers, are vital components of car audio systems, dedicated to delivering powerful and deep bass sounds. They come in various sizes and configurations, and when properly matched with amplifiers and enclosures, they can significantly enhance the audio experience in your vehicle, adding depth and richness to your music.
Below you can find our editor's choice of the best car woofers on the marketProduct description
White Injected Polypropylene ConeSpecially Treated Black Rubber Edge Suspension Vented Motor Structure 1.0-Inch High Temperature Kaptoon Voice Coil Heavy Duty Magnet Structure Bumped Yoke Plate for Extended Excursion Impedance: 4 Ohm 150 Watts RMS/300 Watts Peak Overall Diameter: 6.57-Inch SPL @ 1W/1M: 87.1 DB 40 Oz. Magnet Structure Mounting Depth: 2.76-Inch
- 300 WATT POWER: This high powered audio projection woofer system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style
- BUMPED YOKE PLATE: This high-performance car woofer features a bumped yoke plate for an extended excursion. Also features vented motor structure and a specially treated black rubber edge suspension which also help give a more solid sound
- 1” KAPTON VOICE COIL: This car speaker has 1” high-temperature Kapton voice coil, 87.1 dB SPL & 4-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- 6.5" POLYPROPYLENE CONE: Pyramid follows the standard size for most car stereo systems & created this 6.5" white injected polypropylene cone perfect for new speaker construction, replacing worn or blown speaker in your favorite loudspeaker cabinet
- 40 OZ MAGNET STRUCTURE: This woofer speaker has a 40 oz heavy duty magnet structure. The heavy-duty housing and structure provides a strong foundation, and it is also super easy to install to your vehicle's sound system w/ 2.76” mounting depth
User questions & answers
Question: | Do these fit in a 2006 Jeep Liberty |
Answer: | I would throw it away and get a new one. |
Question: | What do I have to do to make this fit in my 2001 jeep TJ |
Answer: | I don't know if they offer replacement covers, but the original one on the zafu is removable and washable. It's very sturdy, so I think it would wash well. |
Question: | Will this work in the rear speakers in my 99' crv |
Answer: | It could be used outdoors. But it's cloth, so put something under it & bring it inside when done. |
Question: | Why is this marked as a prime item and it takes 8 days for delivery |
Answer: | The zafu cushion has a handle sewn on the back. The square cushion comes with a strap to tie around the cushion for travel. Hope this helps. |
Product description
Pyle Model : PLPW10D
10'' Dual Voice Coil 4 Ohm Subwoofer
10'' 1000 Watt Dual Voice Coil 4 Ohm Subwoofer
Pyle Power Subwoofers pack a huge punch The PLPW10D is a 10-Inch booming 1000 watt subwoofer designed with the bass lover in mind. This subwoofer will make your music growl in your vehicle or at home, in any type of enclosure: sealed, vented, or open-air. The black steel basket and non-press paper cone look sleek - and thanks to a 50 oz. magnet, 2-Inch four-layer dual voice coil, and specially treated foam surround, it sounds great too. Connect to your amplifier using the spring loaded, push-down speaker terminals and feel the Pyle Power.
From the Manufacturer
- 1000 WATT POWER: This high powered subwoofer system has a maximum power output of 1000 watt / 500watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want
- BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for extended excursion
- DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- DUAL VOICE COIL: This complete subwoofer features 50 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring loaded push down speaker terminals
- 10" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 4.7" mounting depth and 10" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers
Product features
10" Car Audio Speaker Subwoofer
Pyle Power-series subwoofers will push your audio to the MAX! This 10" small-enclosure unit will add extra punch to your low-end and give you that huge sound you want. Heavy-duty magnet, pushing 1,000-watt MAX power. Your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe and extends the life of the subwoofer.
1000 WATT POWER
This high powered sub-woofer system has a maximum power output of 1000 watt / 500 watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want
BUILT TO LAST
Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for an extended excursion
DUAL VOICE COIL
This complete sub-woofer features a 50 oz magnet structure and 2 inches 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has a spring-loaded push-down speaker terminals
10" STANDARD SIZE
Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 4.7" mounting depth and 10" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers
Product description
Description of Rock Ghost: Rockville Rock Ghost Powered Car Subwoofer (Amplifier built in). Sub Fits Inside Spare Tire Seamlessly (Goes on top of spare tire so you can leave your spare tire in place). Hidden In Spare Tire - Takes up No Trunk Space. Protected against theft because it is completely hidden in the spare tire. 800 Watts peak output. 200 Watts RMS output. Extremely loud (loud enough to vibrate your mirrors). Super clean sound that is musical and will not fatigue your ears. When this is mounted in your spare tire, the sound transmits cleanly and evenly throughout the vehicle without any vibrations or unwanted noises. It actually sounded better and cleaner than an ordinary sub in the trunk. Tunnel air port design. PWM MOSFET power supply amplifier built in. Low level RCA inputs. 8” high excursion Subwoofer.
- Features: Rockville RockGhost Powered Car Subwoofer (Amplifier built in). Sub Fits Inside Spare Tire Seamlessly (Goes on top of spare tire so you can leave your spare tire in place). Hidden In Spare Tire - Takes up No Trunk Space. Protected against theft because it is completely hidden in the spare tire. 800 Watts peak output. 200 Watts RMS output. Voice Coil: Single
- For Full Size Spare Tire Wheel Sizes of 15"/16"/17". Extremely loud (loud enough to vibrate your mirrors). Super clean sound that is musical and will not fatigue your ears. When this is mounted in your spare tire, the sound transmits cleanly and evenly throughout the vehicle without any vibrations or unwanted noises. It actually sounded better and cleaner than an ordinary sub in the trunk. Tunnel air port design.
- PWM MOSFET power supply amplifier built in. Low level RCA inputs. 8” high excursion Subwoofer. Reverse mounting design. Plug and play installation with wire harness containing power, ground, high level input, remote turn on, and RCA input. Back plate mounts and screws right on top of spare tire. Can also be mounted in trunk or under seat but we recommend mounting it in your spare tire. Flexible rubber surrounds.
- Wired 20 foot dash remote with adjustable gain, bass boost, low pass crossover filter, and phase control. Deep and clear bass frequency. Auto turn on and turn off. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit and Overload Protection Circuit
- Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 150Hz. Frequency response: 20 Hz – 250 Hz. Bass Boost: 0 - 12dB @ 45Hz. 20 Hz Subsonic Filter. Cast aluminum casing. Requires 10 gauge power wire. Dimensions: 14.17” diameter x 5.7” height. Includes all wiring needed for installation
User questions & answers
Question: | Is it normal for the wired remote control to get smoking hot |
Answer: | 1/4-1/2 inch |
Question: | It will fit in a vw golf mk7 spare tire |
Answer: | Yes it will. You will have to turn the power down a little. I have a 4k watt amp at 1 ohm pushing about 800 watts rms to the 2 I have |
Question: | How would you hook up two |
Answer: | Hey Michael, that sounds like a pretty good match. You may also want to consider running the amp at 2 ohms and pulling 1000 RMS from it. At 2 ohms, you won't be quite as loud, but the amp will be running cooler and will sound better. |
Question: | What all do i need to make it work |
Answer: | Hey Richard, this is a good question. Hopefully the answer isn't too confusing. The SA series 8" is rated at 500 RMS, and the 10, 12 and 15" are rated at 750. Now since all Sundown subs are conservatively rated, the 8" can actually handle more than 500 watts (of high quality power in the right enclosure). If you want suggestions on the best amp to use, feel free to send us a direct message, we'll point you in the right direction. |
Product features
Rockville RockGhost Active Powered 8" Hidden Car Subwoofer Sub For 15"/16"/17" Full Size Spare Tire
- **** Please check your cars spare tire wheel size to ensure fitment ****
- Rockville RockGhost Powered Car Subwoofer (Amplifier built in)
- Sub Fits Inside Spare Tire Seamlessly (Goes on top of spare tire so you can leave your spare tire in place)
- Hidden In Spare Tire - Takes up No Trunk Space
- Protected against theft because it is completely hidden in the spare tire
- 800 Watts peak output
- 200 Watts RMS output
- For Full Size Spare Tire Wheel Sizes of 15"/16"/17"
- Extremely loud (loud enough to vibrate your mirrors)
- Super clean sound that is musical and will not fatigue your ears
- When this is mounted in your spare tire, the sound transmits cleanly and evenly throughout the vehicle without any vibrations or unwanted noises. It actually sounded better and cleaner than an ordinary sub in the trunk
- Tunnel air port design
- PWM MOSFET power supply amplifier built in
- Low level RCA inputs
Product description
Skar Audio introduces the SDR-2X10D4 Dual 10-inch loaded Vented subwoofer enclosure to cater to the audiophile who wants a competition grade system in their Vehicle without all of the headache involved with designing it from the ground up. This loaded enclosure features two of our extremely popular SDR-10 D4 1, 200 Watt Max power subwoofers which combined come in at 2, 400 watts Max power for the pair. The woofers come pre-loaded and wired up inside of this custom dual 10" Ported enclosure, which features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box.
this enclosure was engineered by Skar Audio specifically for the woofers that are loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying woofers to ensure that the woofers and enclosure are an ideal match, or you will lose sound quality and output. With this loaded Subwoofer Enclosure model, All of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle.
- Sdr series dual 10-inch Dual 4-ohm loaded Subwoofer Enclosure
- Peak Power: 2, 400 Watts, RMS power: 1, 200 Watts
- Pre-wired Internally for a 1 Ohm Final Impedance Load at the terminals for an easy installation
- Premium Vented Enclosure Made of 5/8" Mdf and finished in black Carpeting
- Double front baffle (1.25") with countersunk subwoofer design for Flush and attractive appearance
User questions & answers
Question: | Will this fit a 2004 Ford Mustang |
Answer: | Yes it should they are pretty compact for being such powerful subs |
Question: | Will the Rockville db25 push the subs |
Answer: | Pushing is a bully tactic and will not be tolerated |
Question: | Will these fit in a 2003 Mitsubishi eclipse |
Answer: | yes |
Question: | Will it fit behind third row seat in my 2006 Ford Expedition xlt |
Answer: | Yes. |
Product features
Product Specifications
- Includes Subwoofer Pre-Loaded Into Subwoofer Enclosure
- Skar Audio SDR-10 D4 - 10" Dual 4 Ohm Subwoofer
- Peak Power: 2,400 Watts (pair) | 1,200 Watts (each)
- RMS Power: 1,200 Watts (pair) | 600 Watts (each)
- Frequency Response: 30 - 300 Hz
- 2.5" High Temperature Copper Voice Coil
Product description
General Features:
- Alpine SWT-S10 Single 10" Bass Tube Subwoofer - 1200 Watts
- Power Handling @Peak: 1200W Total
- Power Handling @ RMS: 250W Total
- Final Impedance: 4 ohms
- Preloaded with a single 10" Subwoofer
- Sealed enclosure with black carpet
- Enclosure Dimensions: 11.22"W x 23.6" D
- Passive Design (Non Amplified) Push SPK Terminal
- Voice coil size/type
- Frequency Response: 35-200
- Sensitivity: 90dB
- Enclosure Features:Tube enclosure
- Black Carpet Finish with White Alpine Logo
- Grille Included
- Brand: Alpine
- MPN: SWT-S10
- Type: Enclosed Non-Powered
- Speaker Size: 10"
- RMS Power: 250W
- Brand: Alpine
- MPN: SWT-S10
- Type: Enclosed Non-Powered
- Speaker Size: 10"
- RMS Power: 250W
User questions & answers
Question: | Is this enclosure sealed or ported? The title says sealed, but the description indicates it is ported |
Answer: | Yes it is ported. |
Question: | How is the sub holding up so far? most of the time i buy these its for the tube. the sub is a throw away and i buy a better one |
Answer: | I'm happy w the sub and the tube. The tube is designed for the sub by Alpine engineer's for the best sound, that's why they're sold together. |
Question: | Did it come with a mounting rack? If not where do i evem look for one |
Answer: | It came with a mounting straps, you wrap the straps around the tube and then screw in an attachment so the strap won’t move. Works great and the base tube doesn’t move at all. Hope that answers your question. |
Question: | Does it come with a mounting bracket |
Answer: | No it comes with straps. |
Product description
6 5'' High Power Subwoofer Non-Press paper Cone Specially Treated Foam Edge Suspension 1 5'' High-Temperature Aluminum Voice Coil Magnet Weight 40 Oz Impedance 4 Ohm Fs 80Hz Qms 4 05 Qes 1 3 Qts 1 2 SPL 87(dB) Vas 6 8(Cuft) Mounting Depth 3" Rubber magnet Boot Cover Sold as Unit Weight 3 87 lbs
From the Manufacturer
- 600 WATT POWER This car subwoofer has 600 Watt peak power that will produce high sound resonance It also has a frequency of 80Hz and 4 Ohm impedance
- FOAM EDGE SUSPENSION Made with a specially treated foam edge suspension to keep equipment safe Designed with bumped and vented motor structure for durability and easy installation
- NON-PRESSED PAPER CONE It is a clean-cut car subwoofer that boasts a black non-pressed paper cone It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time
- ALUMINUM VOICE COIL The speaker subwoofer comes with a 1 5” high-temperature aluminum voice coil to resist corrosion It has a sensitivity of 87dB and a special designed rubber magnet boot
- 3” MOUNTING DEPTH Easy to install with its 3” mounting depth and fits most audio system for cars boats or RVs Included are the necessary cables installation template and manual
User questions & answers
Question: | Should an amp be installed with these or would a factory amp suffice? 2000 gmc yukon xl |
Answer: | Hi, the sub has 300 RMS. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box MAXP64 for more details. Thank you. |
Question: | the price is 2 pieces |
Answer: | Yes, mine are installed in a low space box inverted and sound better then when mounted in the box. If mounted without a box they should work as well without any issue |
Question: | Whats the RMS watts of these subs |
Answer: | Had the same speakers and the didn't last a week and I had 3 of them and they blew out so if I was u look for another brand..... (junk) |
Question: | Will this sub work in a free air installation |
Answer: | if you have a fosgate p1000,you should consider a subwoofer from an equally good manufacturer. you could get 1 soundqubed hds3 12'' 2ohm dual voice coil sub that would make your brain jiggle like jello.like, these lanzars dont even have the RMS watts listed on the product spec sheet. Thats terrible business ethics and have probably caused many unaware customers to blow their subs within days of plugging them in. |
Latest Reviews
View all
Toilet Brush With Holder Walls
- Updated: 23.03.2023
- Read reviews

Chicken Sausages Brands
- Updated: 03.07.2023
- Read reviews

Ornament Trees
- Updated: 27.02.2023
- Read reviews

Cooling Systems
- Updated: 03.05.2023
- Read reviews

Dress With Borders
- Updated: 18.03.2023
- Read reviews