12 best boss car woofers

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

**We are an authorized Boss dealer** The **Boss CXX10** 10" car subwoofer features a MAX power handling of 800 watts (1600W per pair) and a RMS power handling of 400 watts (800W per pair). Other features include the Butyl Rubber Surround, Aluminum Voice Coil and the Poly Injection Cone. The mounting depth is 3.75' and the diameter is 9.2". 800 Watt Max Power (1600W per pair) 4 Ohm Subwoofer Frequency Response 38 Hz

• **Subwoofers:**
• New Boss CXX10 10" 1600 Watt 4 Ohm Car Audio Power Subwoofer Sub Woofer Stereo (Pair)
• Total Power Output: 800 Watts (1600W per pair)
• Impedance: 4 Ohms
• Voice Coil Structure: SINGLE

User questions & answers

Question:	Does this come with the amp? Its in the pictures but not the description..smh
Answer:	Most will come out eventually but they often scrunch up again when tires roll over them. They are not great but better than a cement floor.
Question:	How many watts do the amp supply
Answer:	hi, thank you for your question, actually, this backing of the mat is waterproof and anti-slip, i think it can be used on a floor that gets wet frequently. thank you again.
Question:	Is this a 2 channel amplifier
Answer:	I had them same problem. I got two pieces of 1/2" galvanized pipe each the width of the short side of the mat. I fastened the mat and pipe together with Zip ties. Just poke holes in the mat with a knife and push the Zip ties through. The pipes hold the mat flat and it hasn't moved at all. I suppose a strong enough wind could move it but so far a 35 mph wind didn't budge it. I also Zip tied two mats together to make a longer and easier place to park that old car.
Question:	What is better for these speakers a sealed or ported box
Answer:	Very flimsy. Doesn't stay put.

Product description

BOSS AUDIO CH12DVC - 12" 1800 Watt Dual 4 Ω Voice Coil Subwoofer

• Sensitivity SPL (1W / 1m) 86 dB, Resonant Frequency 36 Hz
• Polypropylene Cone, 2 Inch Copper Voice Coil, Rubber Surround
• Sealed Enclosure Internal Volume: 1.2 Cubic Feet, Ported Enclosure Internal Volume: 1.7 Cubic Feet
• 5.5 Inch Round Inch Port Circumference, 38 Inch Port Length, 30 Hz Port Frequency
• 5.3 Inch Mounting Height, 11 Inch Mounting Hole Diameter
• Dimensions: Depth 13” x Width 13” x Height 5.8”
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	what is the mounting depth
Answer:	Don't know I didn't build the box I had the box custom built for my trunk they got that from the papers that came with the speakers.
Question:	The manufacturer lists these at 1800 watts rms and you list them here at 1200 rms. Which is correct
Answer:	1800 watts RMS is the correct power for the AR12D.
Question:	Are these sold as a pair
Answer:	Hello, The AR10D comes as a single 10-inch subwoofer. Thanks!
Question:	Any recommendations on what grill cover will fit
Answer:	We dont have any recommendations on covers since these subwoofers come without.

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. The 'break-in' process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Product description

Drive your in-vehicle audio experience up a level with the Boss Audio Riot R4002 Class A/B 2-Channel Full Range Amplifier. This 2-Ohm stable amplifier features 800 Watts Max Power with a MOSFET power supply to pump out your playlists. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Control those Bass vibes with the Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Get your vehicle rocking with the Boss Audio R4002. For further product details, please scroll down.

• 400 W MAX Power @ 2 Ohm x 2 Channels
• 200 W MAX Power @ 4 Ohm x 2 Channels
• 800 W MAX Bridged Power @ 4 Ohm x 1 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control
• Dimensions: Depth 10.7” x Width 2.4” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It will with ok sound quality if it's for inside the car listening pleasures. However getting another one and bridging it or a higher powered amp for a good baseline would be recommended.
Question:	Can you support two 10" subs with this one amp
Answer:	Hello. Yes, this amplifier will support two subwoofers. You will need to make sure that each subwoofer does not exceed 400 watts peak power.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	Hello. I would recommend purchasing a monoblock amplifier to power your subwoofer. The R4004 is a 4 channel amplifier that would work better for your speakers.
Question:	whats rhe size of the amplifier
Answer:	Dimensions of the R4002 are 10.79" x 10.43" x 2.25".

Product features

Plenty of Power

Boost your in-vehicle audio experience with the Boss Audio Riot R4002 Class A/B 2-Channel Full Range Amplifier. With 800 Watts Max Power and MOSFET power supply, you get clean, high quality sound. This 2-Channel Amplifier can power a pair of speakers or two subwoofers @4-Ohms or two pairs of speakers or four subwoofers @2-Ohms. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Take your audio power up a notch with the BOSS Audio Armor AR1500M Class A/B monoblock amplifier. This powerful 2-ohm stable amplifier features 1500 Watts Max power with a MOSFET power supply to kick start your music. Customize the sound with variable low pass Crossover and bass boost. Max out the bass range and rock your vehicle with the remote subwoofer control. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Boost your music's bass with the BOSS Audio ar1500m





for further product details, please scroll down.

• POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
• DIMENSIONS: The AR1500M is 10.3 inches in Depth, 6.5 inches in Width and 2.6 inches in Height. It can be installed in a variety of different places due to its’ slim and compact design
• WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com

User questions & answers

Question:	Viene incluido con el controlador de subwoofer
Answer:	Si viene completo, lo trae como con 15 pies de cable para que lo puedas traer hasta adelante
Question:	im using my factory stereo, do i need a specific high/low converter for this Amp? if so, which one
Answer:	For my factory radio I used the PAC line output converter and tapped the factory lines going to my rear right and rear left speaker. The RCA cables then run from the output converter to the amp
Question:	Can this amp run 2 kenwood kfc-w3016ps 12-inch 2000w
Answer:	You should always verify the RMS, but I doubt it. Kenwood is a decent company, so the RMS is probably at least half their max stated Watts. This and will likely only put out a stable 1200 on a good day, which falls 800 short of my estimated draw from 2 of those speakers.
Question:	will this work on 2 12'' Pyle PLBW124 1,200-Watt DVC Subwoofer
Answer:	Yes, I am running 2 of the PLBW12 - 1600 watt 4ohm DVC subs with this Amp set in a series-parallel wiring configuration, which keeps everything stable @4ohms and it sounds phenomenal..

Product features

Slim Design

Get pure bass with the Boss Audio Armor AR1500M Class A/B Monoblock Amplifier. With 1500 Watts Max Power and MOSFET power supply, you'll feel every beat. Customize the sound with Variable Low Pass Crossover, Switchable Bass Boost and Remote Subwoofer Control. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

BOSS Audio Systems CXX10 Car Subwoofer - 800 Watts Maximum Power, 10 Inch Subwoofer, Single 4 Ohm Voice Coil, Sold Individually

• Sensitivity SPL (1W / 1m) 87 dB, Resonant Frequency 36 Hz
• Polypropylene Cone, High Temperature Voice Coil, Rubber Surround
• Sealed Enclosure Internal Volume: .65 Cubic Feet, Ported Enclosure Internal Volume: 1 Cubic Feet
• 3.5 Inch Round Inch Port Circumference, 10 Inch Port Length, 38 Hz Port Frequency
• 4.6 Inch Mounting Height, 9.2 Inch Mounting Hole Diameter
• Dimensions: Depth 11” x Width 11” x Height 4”
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Can you run this with out a box and how tall is the sub
Answer:	It fit perfecty in the spot of the old sub. I don't use a box. My stereo is extremely adjustable . If my stereo was basic it might not work. I love it and it goes well wih my 4 inch speakers. Its like I have a comcert in my car . Unbeatable price for what the sound it puts out
Question:	This is only one sub right? Or two
Answer:	The CX122 is sold as a single subwoofer.
Question:	will this fit in my 06 honda civic, sone models come with subwoofers made in the rear window and mine happen to be one but my woofer is busted
Answer:	Hello, The CX8 should be a great fit being it matches the 8-inch dimension of your current speaker. Thank You!
Question:	Can this sub replace the OEM sub to a 2002 yukon
Answer:	A friend got mine into my 2000 Chevy Tahoe for me. So I assume it will work in your 2002 Yukon. Speakers are great and give good base and sound. Great quality for the price!

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone: Polypropylene

Commonly called just PP, this plastic has various forms. It is a resilient and durable manufactured material that can be used in thousands of applications across virtually all fields. It can be used for tubes, car trims, and bags. In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long time.

Surround: Butyl Rubber

Butyl Rubber is a synthetic (man made) rubber and is valued for its chemical inertness, impermeability to air and the ability to endure or resist exposure to the many types of weather fronts. Butyl rubber has many different applications. Anywhere from Sports equipment to automotive parts, the medical industry and more. We use them for the Surrounds that connect the cone to the basket

Voice Coil: High Temperature

Our voice coils are remarkable for their low density and ability to resist corrosion. They have the ability to perform under stress in both high tension and high compression environments.

Product description

BOSS Audio P100F 10 inch car subwoofer - 1200 Watts maximum power, single 4 ohm voice coil, sold individually

• CONE: Made from Polypropylene, the P100F 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long lasting subwoofers
• VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer pay times with lower weights
• SURROUND: Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
• STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output
• SPECIFICATIONS: Resonant frequency - 48 Hz, Sensitivity SPL (1W/1m) - 85 Db, Impedance – 4 Ohms, Dimensions – 11” x 11” x 4”, Mounting Depth - 3.4”, Mounting hole - 8.1”, Weight – 9.1 Lbs.
• WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	I bought this in March. How does the warranty work
Answer:	No
Question:	is this a Free Air Sub
Answer:	I
Question:	is this a shallow mount speaker because my box isnt very deep
Answer:	2 ohms.
Question:	So can this go in a ported box and function well
Answer:	Honestly I'm not sure. I only needed one, because I I'll ready had 2-12" Rockford fogates. Maybe wire them in parallel, they should say something about the RMS on the back of them, that's the continuous wattage to run them at. It will say 600 watt peak and then like 250 watt rms. If you run them at 600 watts you'll blow them.

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

• BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
• PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• DIMENSIONS: 14 inches in Depth, 12. 3 inches in Width and 3. 3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• : BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	I have a boss 1100 riot mono amp, will the bass gain control knob work with this
Answer:	Yes, it will. But there is one included as well.
Question:	Is this good for the 2019 rav
Answer:	Yes it will fit in your rave 4 as amplifiers are universal.
Question:	I have a bronco with a kenwood stereo and kenwood speakers(4) will this enhance my sound and i am not looking for overpowering bass, is this the right
Answer:	They are not overpowering but they do add bass you can feel with proper placement. under drivers seat and one under pass seat. I would try 2 of the BAB10`s they just sound better and will still barely fit ....check the size specs first. either way you cant go wrong they both sound great! Thanks, Adam
Question:	Can you link two together with one remote
Answer:	WHEN YOU SAY REMOTE DO YOU MEAN 1 REMOTE VOLUME CONTROLLER . I HAVE 2 BAB10'S I WONDERED THAT MYSELF. NOT WANTING TO HURT EITHER UNIT I JUST PUT THE VOLUME CONTROLS SIDE BY SIDE. I'D LIKE TO KNOW WHAT BOSS SAYS.

Product features

Amplified Space Saver

A built-in amplifier powers the 10-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB10 will provide the rich bass that every sound system cannot do without.

Remote Subwoofer Control

A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS

Product description

Blast your favorite tunes on the BOSS Audio 656BCK Receiver and Speaker Package. Included in this combo kit are the 508UAB Receiver and a pair of CK65 2-Way 6.5" Speakers with a Poly Cone Woofer. Give your music a boost and pop in a CD, turn on the AM/FM radio, hook up an MP3 player or your smartphone to the Auxiliary input or plug into the USB port for more choice. Bluetooth technology lets you stream music apps like Pandora and Spotify or make calls hands-free. Pump up the volume and enjoy your next road trip with the BOSS Audio 656BCK. For further product details, please scroll down.

• 508UAB Receiver Plays Bluetooth, CD / USB / MP3, AM/FM Radio, Digital MEDIA from Smart Phones
• Inputs: USB Audio / USB Charging / AUX
• Outputs: Front & Rear Pre Amp
• 508UAB has 50 Watts x 4 Max Power and Preset built-in EQ
• One Pair of CK65 6.5" 2-Way Speakers with Poly Cone Woofer and Foam Surround
• 250 Watts MAX, 180 Watts RMS Power Handling per Pair of Speakers
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Will this fit a 2004 Kia Optima
Answer:	Hello, The 638BCK will fit your vehicle. Vehicle Information 2004 KIA OPTIMA Front speaker size: 6.5" Front depth: 4" Rear speaker size: 6X9" Rear depth: 6" Dashboard size: DOUBLE DIN" Dashboard depth: 8" Thank you, Boss Audio Support Team
Question:	Will this sterio fit a 1986 gmc s
Answer:	Probably, with mounting kit.
Question:	Will this fit Toyota pickup
Answer:	Will fit any car just need the wiring harness
Question:	Will this fit a 2006 scion xa
Answer:	Hello, The 638BCK should fit your 2006 Scion xA. However, you may need 3 aftermarket accessories to complete your installation: • Dash kit • Wire harness (Connects car wiring to stereo wiring) • Antenna adapter Metra, PAC, and Scosche are three brands that offer these products on Amazon. You can find the correct aftermarket accessories by searching the year, make, and model of your vehicle. Thank you, Boss Audio

Product features

Sound Package

Bring your favorite music to life with the BOSS Audio 656BCK Package, which includes the 508UAB Receiver and a pair of CK65 2-Way 6.5" Speakers with Poly Cone Woofer. Blast tunes on a CD or the AM/FM radio, hook up an MP3 player or smartphone through the Auxiliary input or plug into the USB port. Bluetooth technology lets you stream music and make calls hands-free.

Bluetooth and Audio Streaming

Bluetooth enabled for wireless hands-free calling and speaker listening when paired with a smartphone.

Wirelessly stream audio via Bluetooth from compatible devices so you can listen to streaming music services such as Spotify and Pandora through your system.

USB Port

Supports USB flash drive files up to 32 GB for music playback on units without monitors and music, photo and video playback on units with monitors.

Pre-Amp Outputs and Aux Input

This unit's Pre-Amp outputs let you expand your system by adding up to 2 amps and/or signal processors.

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or smartphone so you can enjoy your music through your system.

Built-in Preset EQ

The built-in Preset EQ allows you to choose from preset EQ curves for a variety of music styles such as Rock or Pop.

Electronic Skip Protection

ESP is a feature that buffers the disc while playing, storing 5 seconds of music. If the disc is interrupted, the stored data fills in for continuous performance.

ID3 TAG

ID3 Tag allows the audio file to store and display additional data such as title, artist, album, track number and more.

Wireless Remote Control

A wireless remote control offers access to key functions from the palm of your hand.

Switchable Tuner

The selectable tuner function allows you to adjust this receiver's tuner to receive radio broadcasts in either the US or Europe.

• CONE: Made from Polypropylene, the CXX124DVC 12-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers. VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
• SURROUND: We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear. STAMPED BASKET: A Die-cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
• SPECIFICATIONS: Resonant frequency - 32 Hz, Sensitivity SPL (1W/1m) - 85 Db
• SPECS: Impedance – 4 Ohms, Port frequency – 34 Hz, Dimensions – 13” x 13” x 5.4”, Mounting Depth 4.8”, Mounting hole 11”, Weight – 7.8 Lbs.
• WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	What is the rms wattage rating
Answer:	A friend got mine into my 2000 Chevy Tahoe for me. So I assume it will work in your 2002 Yukon. Speakers are great and give good base and sound. Great quality for the price!

Product description

Pyle Power speakers pack a huge punch! The PLPW15D is a 15-Inch booming 2000 watt subwoofer designed with the bass lover in mind. This subwoofer will make your music growl in your vehicle or at home, in any type of enclosure: sealed, vented, or open-air. The black steel basket and non-press paper cone look sleek - and thanks to a 95 oz. magnet, 2.5-Inch four-layer dual voice coil, and specially treated foam surround, it sounds great too. Connect to your amplifier using the spring loaded, push-down speaker terminals and feel the Pyle Power.

From the Manufacturer

• 2000 WATT POWER: This 15in car subwoofer has a power of 1000 Watt RMS to 2000 Watt peak that will produce high sound resonance. It also has a spring loaded push down speaker terminals that will maximize sound quality
• UNMATCHED PERFORMANCE: Built with 95 oz. magnet that will enhance car stereo or radio by producing a powerful audio and unmatched performance. It comes with a sensitivity or SPL of 92dB to resonate perfect clarity
• DUAL VOICE COIL: The speaker subwoofer comes with a dual 4 Ohm impedance that can be wired as 4 or 8 Ohm. The 2.5” 4-layer dual voice coil can resist corrosion and ensure a longer life span
• TREATED FOAM SURROUND: Made entirely of specially treated foam surround for durability. Designed with this non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a non-pressed paper cone and black steel basket
• 6.3” MOUNTING DEPTH: Easy to install with its 6.3” mounting depth and fits most audio system for cars, boats or RVs. The overall diameter is 15.3 inch. Included are the necessary cables, installation template and manual

Product features

15" Car Audio Speaker Subwoofer

Pyle Power-series subwoofers will push your audio to the MAX! This 15" small-enclosure unit will add extra punch to your low-end and give you that huge sound you want. Heavy-duty magnet, pushing 2,000-watt MAX power. Your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe and extends the life of the subwoofer.

2000 WATT POWER

This 15"in car sub-woofer has a power of 1000 Watt RMS to 2000 Watt peak that will produce high sound resonance. It also has a spring loaded push down speaker terminals that will maximize sound quality

BUILT TO LAST

Made entirely of specially treated foam surround for durability. Designed with this non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a non-pressed paper cone and black steel basket

DUAL VOICE COIL

The speaker subwoofer comes with a dual 4 Ohm impedance that can be wired as 4 or 8 Ohm. The 2.5” 4-layer dual voice coil can resist corrosion and ensure a longer life span

6.3” MOUNTING DEPTH

Easy to install with its 6.3” mounting depth and fits most audio system for cars, boats or RVs. The overall diameter is 15.3 inch. Included are the necessary cables, installation template and manual