12 best american bass car subwoofers
American Bass is a brand known for its car audio products, including subwoofers designed for car audio enthusiasts and automotive audio systems. Here's what you need to know about American Bass car subwoofers:
Variety of Subwoofers: American Bass offers a variety of car subwoofers to cater to different audio preferences and vehicle setups. These include component subwoofers, which are individual subwoofer drivers that require a separate enclosure, and powered subwoofers, which come with built-in amplifiers for convenience.
Sizes and Power Ratings: American Bass car subwoofers come in various sizes, typically ranging from 8 inches to 18 inches in diameter. They also have different power handling capabilities, allowing you to choose a subwoofer that matches your desired level of bass output.
Design and Build Quality: American Bass subwoofers are known for their robust construction and build quality. They often feature durable materials, such as high-quality cones, surrounds, and voice coils, to withstand the rigors of car audio applications.
Sound Quality: American Bass subwoofers are designed to deliver powerful and deep bass response, enhancing the audio experience in your vehicle. They are often favored by car audio enthusiasts who want to achieve impressive low-frequency output.
Customization: Some American Bass subwoofers allow for customization, such as dual voice coil options and impedance choices, which can help fine-tune your car audio system to your preferences.
Installation: Installing American Bass subwoofers in your car typically requires a compatible subwoofer enclosure or box, as well as an amplifier to power the subwoofer.Proper installation is crucial for optimal performance.
Compatibility: American Bass subwoofers are designed to work with various car audio setups and can be integrated into both factory and aftermarket systems.
When considering American Bass car subwoofers, it's essential to choose a subwoofer size and power rating that suits your vehicle's space and your audio preferences. Additionally, pairing them with quality amplifiers and enclosures can further enhance your car audio system's performance, delivering a satisfying and immersive listening experience.
Below you can find our editor's choice of the best american bass car subwoofers on the marketProduct description
American Bass E1544 15 2400 Watt Elite Series DVC Subwoofer
- Heavy Durable Stamped Basket with Black Powder Finish
- Fiber Added Non-Press Paper Cone
- Hi-Roll High Density Foam Surrounded with Silver Stitching
- 3" Hi-Temp 4-Layer Voice Coil on Aluminum Bobbin
- Double Black Poly-Cotton Spiders with Mirror-Image Layout Space by Spider Ring
User questions & answers
Question: | If im running these dual, what size amp should i get |
Answer: | The PEQ controls bass levels when using certain Rockford Fosgate amps. Rockford Fosgate makes other volume knobs to work with their different amps. You can use any brand speaker. |
Question: | Is this a dual 2 ohm sub |
Answer: | I do not know about the P8002, but people need to be aware that this device has an RJ45 (Ethernet) jack, and NOT a RJ11 (Phone). it is misleading that this works with "2007 and up" amps, it does NOT work with all 2007 and up RF amps. I bought this due to bad info in the comment section and wanted to clear this up. |
Question: | What Does The Box need to be tuned too for this sub |
Answer: | Yes |
Question: | Will 8 gauge wire fit in the wire terminal for the elite |
Answer: | This plugs into certain Rockford amps. It is basically a bass booster that can add a range of 0-18db of boost centered at 45hz. It is useful to help fine tune your system 's performance. |
Product description
2000W 15" Dual 4-Ohm XFL Series Car Subwoofer
- 1000W RMS
- 2000W Max
- Non-Pressed Paper Cone
- High-roll Foam Surround
- Cast Aluminum Basket
User questions & answers
Question: | I have a hifonics zues 2400 watt amp. Im looking for 2 15 inch speakers will 1000 rms on each speaker can the amp support that wattage |
Answer: | They don’t hit as hard as I expected. But they sound pretty good |
Question: | Will an orion xtr2500d class amplifier be enuf for two of these subs |
Answer: | Have mine in a blazer. Dont know if it would fit under seat or not |
Question: | Whats a good amp i can go with american bass has for 1 of these subs |
Answer: | I have this sub in my 87 GMC regular cab and it fits very well |
Question: | Can it wired down to 1 ohm |
Answer: | Will fit no problem, most likely will fit under your seats too. Ive had this same speaker for about 2 years and it's great, I would recommend spending the almost $15 extra and get the 12" |
Product description
American Bass 15" Subwoofer 3000 Watts Max DVC 4 Ohm XR-15D4 American Bass has designed the XR series subwoofer for the ultimate low bass enthusiast. The XR series will deliver crisp bass surpassing the competition. Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation. Consisting of a fiberglass reinforced cone, cast frame, and stitched rubber surround. With this subwoofer packing in a DVC 4 ohm 3" aluminum voice coil pumping out a max power of 3000 watts, it'll deliver nothing but pure quality bass for everyone to hear! Features 15" Subwoofer RMS/ MAX Power: 1500W/3000W Stitched Rubber Surround Fiberglass Reinforced Cap DVC 4 Ohm 3" Aluminum Voice Coil 200 Oz Magnet Structure PVC Gasket Ring PVC Magnet Boot Nominal Impedance: 4 + 4 Sensitivity: 86dB Frequency Range 33Hz-500Hz Mounting Depth: 8.66" Cut-out Size: 14.09"
- RMS/ MAX Power: 1500W/3000W
- Stitched Rubber Surround
- DVC 4 Ohm 3" Aluminum Voice Coil
- 200 Oz Magnet Structure
- Frequency Range 33Hz-500Hz
User questions & answers
Question: | Are these better than the american bass xfl |
Answer: | I've had both. They both are great. The xfl had more upper frequency output but still does great down low. The xr was thundering without all the upper notes being as loud. Also depends on the box but I had both in the same box |
Question: | How do i decide between this and the rockford fosgate p3d4-15 punch p |
Answer: | I had a p3 12 and killed it really easy. Only name brand sub ive ever blown. I have a xr 15 that i got after an American Bass Elite 12, the elite is a mid grade and that 12 hits harder than almost anything ive heard. The 1 xr 15 literally rattles my ear drums with only 1000rms out of the 1500. Id get American Bass, im new to them but they are my new sub brand hands down |
Product description
The Skar Audio SDR-12 D2 12" Dual 2-ohm subwoofer was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, This woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros. The SDR-12 Dual 2-ohm 12-inch car subwoofer features a 2.5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1, 200 watts and a RMS power rating of 600 watts. Sensitivity (SPL): 84.7 dB, mix: 13.5mm one-way, Fs: 32 Hz, frequency response: 22 Hz- 300 Hz, mounting depth: 7.62".
- 12-Inch Dual 2-ohm Car Subwoofer
- Peak Power: 1,200 Watts | RMS Power: 600 Watts
- 2.5" 4-Layer High Temperature Copper voice Coil | Fs: 32 Hz
- High Roll Foam Surround and Competition Grade Pressed Paper Cone
- Powerful High Flux Ferrite Motor | Advanced Air Flow Cooling Design
- Frequency Response Range: 22 Hz - 300 Hz | Sensitivity: 84.7 dB
User questions & answers
Question: | can I use them with a 600w power in a subwoofer box for ram |
Answer: | If you have strong electrical they will run .5 ohm all day long. |
Question: | Does this sub still sound good with 500 watts RMS at 2 ohm load |
Answer: | Make sure you take a look at the spec for a 4 ohm configuration. That amp at 4 ohm would only put out around 500vl watts. |
Question: | Can these handle 800watts rms |
Answer: | Yes |
Question: | Can I put the 1200w monoblock scar amp full blast with 2 of these |
Answer: | Both and school work. The 1500 will just be a comfortable amount of power but if you want to really drive your sub go with the bigger version. |
Product features
Technical Specifications
- Dual 2 Ohm Voice Coil Configuration
- Peak Power: 1200 Watts
- RMS Power: 600 Watts
- Competition Grade Pressed Paper Cone
- 2.5" High Temperature Copper Voice Coil
- Frequency Response: 22 Hz - 300 Hz
- Sensitivity: 84.7 dB
- Xmax: 13.5 mm
- Mounting Depth: 6.47"
Skar Audio DNR-15 D2
The Skar Audio SDR series was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, this woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros.
The SDR series features a 2.5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1,200 watts and a RMS power rating of 600 watts.
Product description
American Bass American Bass 10" Wooofer Dvc 2Ohm 900W Max XD1022 Woofer
- American Bass 10" Woofer 900W Max 2 Ohm DVC
User questions & answers
Question: | What is the RMS power |
Answer: | 450 rms... I had a 1000 watt power bass class D pushing two of them and they beat down. |
Question: | Do they come in pairs or single |
Answer: | buy them as singles and they hit hard with the right amplifier. |
Product description
The XO series subwoofers are terrific all-around speakers for dual voice-coil setups. There are few subs available today that can match the quality and price of this long-running American Bass classic. The XO series works flawlessly in enclosures to execute an outstanding bass response.
- Impedence: 2 x 4 OHM. RDC: 1.7. Levc: 1.578 mH. Fo: 29.5 Hz. Sd: 80.43 msqM. BL: 9.757 TM
- Qms: 4.558. Qes: 0.731. Qts: 0.63. n%: 0.246. SPL: 87.9 dB. Vas: 130.1 L. Cms: 141.8 uM/N
- Mms: 285.4 g. VC: 2.5 Inch. Mgnt: 120 oz. Xmax: 13 ±MM. RMS Watts: 500W. MAX Watts: 1000W
- F.Range: <500 Hz. Mounting Depth: 228 MM (9 Inch). Sealed Enclosure Volume: 2.9 - 3.3 Cubic Feet
- SPK: L6.824 DSP
Product description
NEW American Bass XFL1044 10 inch 2000 Watts Subwoofer
- Black Powder Finish Heavy-Duty Stamped Basket
- Perimeter Vents for Better Voice Coil Cooling
- Kevlar Fiber Enforced Non-Pressed Paper Cone
- Oversized 1.4" 3-Layer Foam Surround
- Hi-Temp 4 Ohm 4 Layer voice Coil with Nomex Protection
User questions & answers
Question: | Does it came as a pair or just one |
Answer: | 2,500 WATT AMP,NO U NEED A 3,000 RMS MONO BLOCK AMP TO PUSH THESE. |
Question: | are these the new style or old |
Answer: | Yes! The only this is. The planet audio at 2ohm is 2,000 rms but it only puts out 1600 to 1700 rms. |
Question: | Will this woofers fit under the seat of a Chevy avalanche |
Answer: | Fold up the smaller back seat,hook a good ratchet stram from the driver seatinside leg to tho outside leg of the rear seat,thats how i have my 15 mounted |
Question: | What amp would be better for two for these subs? american bass ph4000 or a hifonics zrx3216.1d |
Answer: | No. You are lucky to get 1500 true Watts with that amp, so it will drive one perfectly or two pretty well. In this review it's true power was tested. https://www.amazon.com/gp/aw/review/B01CQMWUDO/R207TBR7ULZQ6R/ref=cm_cr_dp_mb_rvw_1?ie=UTF8&cursor=1 |
Product description
American Bass XR-12D2 12" Subwoofer 2400 Watts Max American Bass has designed the XR series subwoofer for the ultimate bass enthusiast. The XR series will deliver crisp bass surpassing the competition. Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation while the rest of the sub features a fiberglass reinforced cone, cast frame, and stitched rubber surround. With this subwoofer packing in a DVC 2-ohm 3" aluminum voice coil pumping out a max power of 2400 watts, it'll deliver nothing but pure quality bass for everyone to hear! Features and Specifications: 12" Subwoofer RMS Power: 1200 Watts Max Power: 2400 Watts Stitched Rubber Surround Fiberglass Reinforced Cap DVC 2 Ohm 3" Aluminum Voice Coil 200 Oz Magnet Structure PVC Gasket Ring PVC Magnet Boot Impedance: Dual 2 Ohm Mounting Depth: 7.756" Cut-out Size: 10.78" This listing is for one XR-12D2 Subwoofer
- 12" Subwoofer
- RMS Power: 1200 Watts
- Stitched Rubber Surround
- Fiberglass Reinforced Cap
- DVC 2 Ohm 3" Aluminum Voice Coil
User questions & answers
Question: | What kind of amp do i need for a single one of this sub |
Answer: | These woofers are beast I bought one for a similar ported box and it hits hard worth every penny liked it so much bought a second one No disappointments |
Question: | What's the rms |
Answer: | no the hifonics zues amp will not support enough power for 2 15 inch woofers at 1000 rms |
Question: | Do they work well in sealed box |
Answer: | Should actually be perfect to push the subs to the limit without damage. I also have an Orion Xtr 2500.1, but my subs are American Bass XR 12's and it's makes serious sound pressure in a ported box. I'm pushing the subs to the max and still no damages at all after 2-3 years of knocking my rear view mirror off the windshield. |
Question: | I’m looking for a amp for 2 of these any suggestions |
Answer: | You can go with any brand that can push 1500 rms and up this sub can handle around 1500 to 2000 i am personally running an audiopipe mini 2000 watts amp and it hits super hard |
Product description
American Bass XFL-1022 10" Dual 2 Ohm Subwoofers - 2 Pack The XFL series from American Bass is specially designed to give you power and sound that leaves the competition far behind. With its rock-solid structure and clean power output, American Bass' reliable XFL-1022 subwoofers will make your automobile come alive with power and sound. Featuring a 220-ounce magnet, 3-inch voice coil, and pre-wired terminals with tinned ends, these subs are easy to install and will put out all the bass you need. Features and Specifications: Black Powder Finish Heavy-Duty Stamped Basket Perimeter Vents for Better Voice Coil Cooling Kevlar Fiber Enforced Non-Pressed Paper Cone Oversized 1.4" 3-Layer Foam Surround Hi-Temp 2 Ohm 4 Layer Voice Coil with Nomex Protection Mirror Image Double Conex Spider System Double Stacked Hi-Energy Magnets Custom Made Rubber Gasket Custom Made Rubber Magnet Boot RMS Power: 1500 Watts Max Power: 3000 Watts Impedance: Dual 2 Ohm Voice Coil: 3" Magnet Size: 220 Ounces FS Hz: 38.61 QMS: 4.512 QES: 0.426 QTS: 0.390 VAS: 10.85 MMS g: 219 XMAX: .68" SPL dB/M: 83.5 BL TESLA-M: 22.3 Mounting Depth: 7.13" Cut-Out Diameter: 9.375" This listing is for two XFL-1022 subwoofers.
- Black Powder Finish Heavy-Duty Stamped Basket
- Perimeter Vents for Better Voice Coil Cooling
- Kevlar Fiber Enforced Non-Pressed Paper Cone
- Oversized 1.4" 3-Layer Fo
- Hi-Temp 2 Ohm 4 Layer voice Coil with Nomex Protection
Product description
Are you looking for the power of an XFL subwoofer but not the price? Then the American Bass Elite Series is just what you need. The Elite subwoofers are very similar in performance to the XFL except the Elite subs have a stamped basket instead of the traditional cast basket. These woofers sit on top of a 150oz Stacked magnet along with a fiber added non-pressed cone topped with hi-roll high-density foam surround with double stitching. The subwoofer also comes with 3" hi-temp 4-layer voice coil on an aluminum bobbin which gives these subwoofers a power handling of 2400 Watts Max. Features: Heavy Duty Stamped Basket Fiber Added Non Press Paper Cone Hi Roll High Density Foam Surround With Silver Stitching 3 Hi Temp 4 Layer Voice Coil On Aluminum Bobbin Double Black Poly Cotton Spiders with Mirror Image Layout Spaced By Spider Ring Double Thick Tinsel Stitched On Spider 150oz Magnet 1200 Watts RMS / 2400 Watts Max Specifications: RMS Power: 1200W Max Power: 2400W Impedence (Ohms): D4 Sensitivity Db: 86.45 Mounting Depth (In): 6.77 Cutout Size (In): 10.94 Ported Box (Ft3): 2.5 Magnet Size (Oz): 150 Voice Coil Size: 3 Basket Type: Stamped Recommended Amp (Pair): Vfl 2.5K Specifications: Heavy Durable Stamped Basket with Black Powder Finish Fiber Added Non-Press Paper Cone Hi-Roll High Density Foam Surrounded with Silver Stitching 3" Hi-Temp 4-Layer Voice Coil on Aluminum Bobbin Double Black Poly-Cotton Spiders with Mirror-Image Layout Space by Spider Ring Double Thick Tinsel Stitched on Spider Double Stacked 75 Oz High Grade Magnets (150 Oz Total) 1-pc Tech Deep Bumped T-Yoke for Maximum Excursion Chrome Finish Push Terminals Rubber Magnet Boot to Protect Motor Dual 4 Ohm Impedance 1200 W RMS Power 2400 W Max Power This Listing Is For ONE Subwoofer
- Heavy Durable Stamped Basket with Black Powder Finish
- Fiber Added Non-Press Paper Cone
- Hi-Roll High Density Foam Surrounded with Silver Stitching
- 3" Hi-Temp 4-Layer Voice Coil on Aluminum Bobbin
- Double Black Poly-Cotton Spiders with Mirror-Image Layout Space by Spider Ring
User questions & answers
Question: | Whats the min cubic foot ported box these woofers can be mounted in |
Answer: | I don't I ordered the Q box from Amazon for a 100 dollars and it sounds great and it's a solid box |
Question: | What is the air space required for the woofer |
Answer: | How many are you running? |
Question: | Whats the depth needed for the speaker |
Answer: | Americanbass.com or sonicelectronix.com should be able to provide these specs for you. |
Question: | Is it 1 speaker or |
Answer: | 3.5-4.0 |
Product description
2000W 15" Dual 2-Ohm XFL Series Car Subwoofer
- 1000W RMS
- 2000W Max
- Non-Pressed Paper Cone
- High-roll Foam Surround
- Cast Aluminum Basket
User questions & answers
Question: | Whats a great sealed box specs for this speaker? Or smallest ported box size...i have a mitsubishi lancer |
Answer: | Just 1 Best 10" speakers around |
Question: | Is this better sealed or ported |
Answer: | New style. Has bigger basket and ribbed surrounds. Plus higher watts then advertised. Atleast the one I got was 1500rms 3000 max! Wish they were back in stock I only got 1. I need 1 more. |
Question: | whats the cutout that i will need to make for a box build |
Answer: | No it’s to big |
Question: | How man of these would i need to handle my 5000 watt class d monoblock planet audio amp thats stable at 1ohm |
Answer: | Ph4000MD is a good match for this woofer but the VFL120.1 is a better match. These woofers do more than the 1000 watts RMS that they are rated at. |
Product description
Two American Bass XFL-1544 15" Dual 4 Ohm Subwoofers The XFL series from American Bass is specially designed to give you power and sound that leaves the competition far behind. With its rock-solid structure and clean power output, American Bass' reliable XFL-1544 subwoofers will make your automobile come alive with power and sound. Featuring a 220-ounce magnet, 3-inch voice coil, and pre-wired terminals with tinned ends, these subs are easy to install and will put out all the bass you need. Features and Specifications Per Speaker: Black Powder Finish Heavy-Duty Stamped Basket Perimeter Vents for Better Voice Coil Cooling Kevlar Fiber Enforced Non-Pressed Paper Cone Oversized 1.4" 3-Layer Foam Surround Hi-Temp 4 Ohm 4 Layer Voice Coil with Nomex Protection Mirror Image Double Conex Spider System Double Stacked Hi-Energy Magnets Custom Made Rubber Gasket Custom Made Rubber Magnet Boot RMS Power: 1000 Watts Max Power: 2000 Watts Impedance: Dual 4 Ohm Voice Coil: 3" Magnet Size: 220 Ounces Mounting Depth: 9.33" Cut-Out Diameter: 14.1" This listing is for two XFL-1544 subwoofers.
- Black Powder Finish Heavy-Duty Stamped Basket
- Perimeter Vents for Better Voice Coil Cooling
- Kevlar Fiber Enforced Non-Pressed Paper Cone
- Oversized 1.4" 3-Layer Foam Surround
- Hi-Temp 4 Ohm 4 Layer voice Coil with Nomex Protection
User questions & answers
Question: | Is this item a pair |
Answer: | not if you want to put it into a 2ohm config down from 4. I couldn't even fit 10 gauge. had ti splice them together, and put in one chord. You'd have to use like 12 or something to put it down to a 2ohm. |
Latest Reviews
View all
Battery Charger For Vape 18650
- Updated: 12.04.2023
- Read reviews

Paint Making Materials
- Updated: 25.07.2023
- Read reviews

Se Drills
- Updated: 31.01.2023
- Read reviews

Sprout Fruit Snacks
- Updated: 14.02.2023
- Read reviews

Tenda Wireless Range Extenders
- Updated: 10.05.2023
- Read reviews