14 best american bass 10 inch subwoofers
American Bass is a reputable brand in the car audio industry known for producing a variety of car audio components, including subwoofers. Here is some information about their 10-inch subwoofers:
Size: American Bass 10-inch subwoofers, as the name suggests, have a diameter of 10 inches. This size is popular among car audio enthusiasts because it strikes a balance between powerful bass response and space efficiency.
Power Handling: American Bass 10-inch subwoofers typically have varying power handling capabilities, often ranging from a few hundred watts RMS (Root Mean Square) to over a thousand watts RMS. This power handling capacity indicates how much continuous power the subwoofer can handle without distortion.
Sensitivity: Sensitivity refers to how efficiently the subwoofer converts power into sound. Higher sensitivity ratings mean the subwoofer can produce more sound with less power input.American Bass subwoofers often have competitive sensitivity ratings to deliver impactful bass without straining the car audio system.
Impedance: Subwoofers come with different impedance levels, typically measured in ohms. Common impedance values for car audio subwoofers include 2 ohms, 4 ohms, and 8 ohms. The choice of impedance affects how the subwoofer interacts with the car amplifier, so it's important to match the subwoofer's impedance with the amplifier's capabilities.
Cone Material and Design: The cone material and design influence the subwoofer's durability and performance. American Bass subwoofers often feature cones made from materials like polypropylene or other composites, designed to be rigid yet lightweight for accurate bass response.
Enclosure Type: American Bass 10-inch subwoofers can be used in various types of enclosures, including sealed, ported, or bandpass enclosures. The choice of enclosure affects the subwoofer's sound characteristics, including bass response and overall output.
Usage: These subwoofers are designed specifically for car audio applications, providing deep and powerful bass for in-car entertainment systems. They are commonly used in custom car audio installations to enhance the audio experience for drivers and passengers.
When installing an American Bass 10-inch subwoofer, it's important to follow the manufacturer's recommendations regarding enclosure specifications, power requirements, and wiring to ensure optimal performance and longevity of the subwoofer and the overall car audio system.
Below you can find our editor's choice of the best american bass 10 inch subwoofers on the marketProduct description
American Bass XFL-1022 10" Dual 2 Ohm Subwoofers - 2 Pack The XFL series from American Bass is specially designed to give you power and sound that leaves the competition far behind. With its rock-solid structure and clean power output, American Bass' reliable XFL-1022 subwoofers will make your automobile come alive with power and sound. Featuring a 220-ounce magnet, 3-inch voice coil, and pre-wired terminals with tinned ends, these subs are easy to install and will put out all the bass you need. Features and Specifications: Black Powder Finish Heavy-Duty Stamped Basket Perimeter Vents for Better Voice Coil Cooling Kevlar Fiber Enforced Non-Pressed Paper Cone Oversized 1.4" 3-Layer Foam Surround Hi-Temp 2 Ohm 4 Layer Voice Coil with Nomex Protection Mirror Image Double Conex Spider System Double Stacked Hi-Energy Magnets Custom Made Rubber Gasket Custom Made Rubber Magnet Boot RMS Power: 1500 Watts Max Power: 3000 Watts Impedance: Dual 2 Ohm Voice Coil: 3" Magnet Size: 220 Ounces FS Hz: 38.61 QMS: 4.512 QES: 0.426 QTS: 0.390 VAS: 10.85 MMS g: 219 XMAX: .68" SPL dB/M: 83.5 BL TESLA-M: 22.3 Mounting Depth: 7.13" Cut-Out Diameter: 9.375" This listing is for two XFL-1022 subwoofers.
- Black Powder Finish Heavy-Duty Stamped Basket
- Perimeter Vents for Better Voice Coil Cooling
- Kevlar Fiber Enforced Non-Pressed Paper Cone
- Oversized 1.4" 3-Layer Fo
- Hi-Temp 2 Ohm 4 Layer voice Coil with Nomex Protection
Product description
New American Bass Xfl1022 10 2000 Watt Subwoofer Car Audio Sub 10 Inch 2000W
- Heavy duty high-excursion design basket; Strong carbon-Kevlar nonpressed paper cone; NT multi-layer high-density foam surround.
- Dual 2 ohm voice coil, 4 ohms impedance; High temperature 3-inch voice coil with long windings. 1 piece tech T-yoke with high-extended pole piece; CONEX spiders.
- Triple-stacked 220 ounce magnet; Cooling pump motor design; Uni-rubber gasket and rubber magnet boot.
- 1000W RMS, 2000W max; Frequency range: 31.6 Hz to 300Hz.
- Mounting depth: 7.31 inches, 181 mm.
User questions & answers
Question: | You think one is enough to have some kind of bump in a 2019 Camry. Don’t want to over do it but not be to low either |
Answer: | I would say ported , I went with 4.5 cubic ft .... It barely went in the trunk of a Honda civic but has plenty of room for amp rack an capacitor |
Question: | is it the sub pictured.? or the one with the leads connected to the voice coils |
Answer: | I would build a ported enclosure at about 3 cu ft per sub with 14 sq in of port area per cu ft of volume and you should be good. |
Question: | Doea anyone know the exact measurement from the bottom of magnet to the top of the mounting ring |
Answer: | 353 mm according to AB spec sheet. You can download all measurements and specs from AB website as a pdf file. |
Question: | do these have the fat spl surround like in the photo? My current 10" xfl does not have that |
Answer: | 2 |
Product description
American Bass XR-10D2 10" Subwoofer 2000 Watts Max American Bass has designed the XR series subwoofer for the ultimate bass enthusiast. The XR series will deliver crisp bass surpassing the competition. Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation while the rest of the sub features a fiberglass reinforced cone, cast frame, and stitched rubber surround. With this subwoofer packing in a DVC 2-ohm 3" aluminum voice coil pumping out a max power of 2000 watts, it'll deliver nothing but pure quality bass for everyone to hear! Features and Specifications: 10" Subwoofer RMS Power: 1000 Watts Max Power: 2000 Watts Stitched Rubber Surround Fiberglass Reinforced Cap DVC 2 Ohm 3" Aluminum Voice Coil 200 Oz Magnet Structure PVC Gasket Ring PVC Magnet Boot Impedance: Dual 2 Ohm Mounting Depth: 7.08" Cut-out Size: 9.21" This listing is for one XR-10D2 Subwoofer
- 10" Subwoofer
- RMS Power: 1000 Watts
- Stitched Rubber Surround
- DVC 2 Ohm 3" Aluminum Voice Coil
- Mounting Depth: 7.08" | Cut-out Size: 9.21"
User questions & answers
Question: | Would this be good for the double bass pedal of metal? I planned on putting it in a 2 cu ft box, tuned to 35hz with 1000 rms to it |
Answer: | Buy the 2 ohm version and you could. |
Product description
American Bass American Bass 10" Wooofer Dvc 2Ohm 900W Max XD1022 Woofer
- American Bass 10" Woofer 900W Max 2 Ohm DVC
User questions & answers
Question: | What is the RMS power |
Answer: | 450 rms... I had a 1000 watt power bass class D pushing two of them and they beat down. |
Question: | Do they come in pairs or single |
Answer: | buy them as singles and they hit hard with the right amplifier. |
Product description
Skar Audio created this custom loaded enclosure package to deliver powerful, deep, and tight bass in an all-in-one competition-grade system. This package features two, 12-inch, dual 4-ohm, Skar Audio SDR Series subwoofers, which are pre-loaded and wired up inside of a custom dual 12" ported enclosure. Next, we pair the loaded enclosure of this package with the Skar Audio RP-1200.1D Class D mono-block amplifier, the perfect amplifier to power your new system and matched for perfect compatibility and power handling with the included subwoofers. Finally, we include a premium Skar Audio 4 Gauge OFC premium amplifier wiring kit to install your new system, making installation hassle free. The Skar Audio SDR series of subwoofers were designed to deliver hard hitting, low spectrum sound. Featuring a high flux ferrite motor, these versatile 12-inch woofers are conservatively rated at 1,200 watts max power each. When looking for a system that delivers low end frequencies with authority, look no further. This is the perfect solution for a daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. The enclosure housing the subwoofers features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 2,400 Watts, RMS Power: 1,200 Watts
- Includes x1 Skar Audio SDR-2X12D4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
User questions & answers
Question: | Will this fit in a 2017 ford GT |
Answer: | That one I'm not to sure on. But ford GT, nice... You could stop by and we can check it out...lol. Good luck. |
Question: | Will this fit in a 2020 hyundai sonata trunk |
Answer: | It will if your trunk is 40”wide by 20”deep and 16” tall |
Question: | will it fit in a 2006 altima |
Answer: | Yes |
Question: | Will it fit in a 2005 double cab Tacoma |
Answer: | I would say yes. But will not leave much room at all. |
Product description
Are you looking for the power of an XFL subwoofer but not the price? Then the American Bass Elite Series is just what you need. The Elite subwoofers are very similar in performance to the XFL except the Elite subs have a stamped basket instead of the traditional cast basket. These woofers sit on top of a 150oz Stacked magnet along with a fiber added non-pressed cone topped with hi-roll high-density foam surround with double stitching. The subwoofer also comes with 3" hi-temp 4-layer voice coil on an aluminum bobbin which gives these subwoofers a power handling of 2400 Watts Max. Features: Heavy Duty Stamped Basket Fiber Added Non Press Paper Cone Hi Roll High Density Foam Surround With Silver Stitching 3 Hi Temp 4 Layer Voice Coil On Aluminum Bobbin Double Black Poly Cotton Spiders with Mirror Image Layout Spaced By Spider Ring Double Thick Tinsel Stitched On Spider 150oz Magnet 1200 Watts RMS / 2400 Watts Max Specifications: RMS Power: 1200W Max Power: 2400W Impedence (Ohms): D4 Sensitivity Db: 86.45 Mounting Depth (In): 6.77 Cutout Size (In): 10.94 Ported Box (Ft3): 2.5 Magnet Size (Oz): 150 Voice Coil Size: 3 Basket Type: Stamped Recommended Amp (Pair): Vfl 2.5K Specifications: Heavy Durable Stamped Basket with Black Powder Finish Fiber Added Non-Press Paper Cone Hi-Roll High Density Foam Surrounded with Silver Stitching 3" Hi-Temp 4-Layer Voice Coil on Aluminum Bobbin Double Black Poly-Cotton Spiders with Mirror-Image Layout Space by Spider Ring Double Thick Tinsel Stitched on Spider Double Stacked 75 Oz High Grade Magnets (150 Oz Total) 1-pc Tech Deep Bumped T-Yoke for Maximum Excursion Chrome Finish Push Terminals Rubber Magnet Boot to Protect Motor Dual 4 Ohm Impedance 1200 W RMS Power 2400 W Max Power This Listing Is For ONE Subwoofer
- Heavy Durable Stamped Basket with Black Powder Finish
- Fiber Added Non-Press Paper Cone
- Hi-Roll High Density Foam Surrounded with Silver Stitching
- 3" Hi-Temp 4-Layer Voice Coil on Aluminum Bobbin
- Double Black Poly-Cotton Spiders with Mirror-Image Layout Space by Spider Ring
User questions & answers
Question: | Whats the min cubic foot ported box these woofers can be mounted in |
Answer: | I don't I ordered the Q box from Amazon for a 100 dollars and it sounds great and it's a solid box |
Question: | What is the air space required for the woofer |
Answer: | How many are you running? |
Question: | Whats the depth needed for the speaker |
Answer: | Americanbass.com or sonicelectronix.com should be able to provide these specs for you. |
Question: | Is it 1 speaker or |
Answer: | 3.5-4.0 |
Product description
NEW American Bass XFL1044 10 inch 2000 Watts Subwoofer
- Black Powder Finish Heavy-Duty Stamped Basket
- Perimeter Vents for Better Voice Coil Cooling
- Kevlar Fiber Enforced Non-Pressed Paper Cone
- Oversized 1.4" 3-Layer Foam Surround
- Hi-Temp 4 Ohm 4 Layer voice Coil with Nomex Protection
User questions & answers
Question: | Does it came as a pair or just one |
Answer: | 2,500 WATT AMP,NO U NEED A 3,000 RMS MONO BLOCK AMP TO PUSH THESE. |
Question: | are these the new style or old |
Answer: | Yes! The only this is. The planet audio at 2ohm is 2,000 rms but it only puts out 1600 to 1700 rms. |
Question: | Will this woofers fit under the seat of a Chevy avalanche |
Answer: | Fold up the smaller back seat,hook a good ratchet stram from the driver seatinside leg to tho outside leg of the rear seat,thats how i have my 15 mounted |
Question: | What amp would be better for two for these subs? american bass ph4000 or a hifonics zrx3216.1d |
Answer: | No. You are lucky to get 1500 true Watts with that amp, so it will drive one perfectly or two pretty well. In this review it's true power was tested. https://www.amazon.com/gp/aw/review/B01CQMWUDO/R207TBR7ULZQ6R/ref=cm_cr_dp_mb_rvw_1?ie=UTF8&cursor=1 |
Product description
American Bass 10" Subwoofer TITAN 1044 Dual 4 Ohm American Bass has designed a subwoofer with a white powder finish heavy-duty stamped basket for better voice coil cooling and performance. The design of the American Bass TITAN 1044 subwoofer offers a multilayer high-density foam surround, flat T-yoke with hi-extend pole price, and multiple CONEX spiders. Specifically designed with a cooling motor for ultimate power handling and gut-wrenching bottom end bass that will make your system stand out from the rest. Features White powder finish heavy-duty stamped basket with perimeter vents for better voice coil cooling Kevlar fiber enforced non-pressed paper cone 3 layer foam surround Hi-temp 4 ohm 4 layer voice coil with Nomex protection Mirror image double Conex spider system Double stacked hi-energy magnets 170 Oz magnet with vented cooling motor Y35 magnets for better performance Specifications Voice coil diameter: 3" Impedance Ohm: Dual 4 Re ohm: 6.4 FS Hz: 36.01 Sd: 334.56 Md g: 150 BL: 21.14 Qms: 4.37 Qes: .66 Qts: .57 No: .14 SPL dB: 84.2 Vas L: 15.23 Cms: 95.82 Krm: 18.47 Erm: .76 MMS g: 203 MMd: 200 Kxm: 61.99 Exm: .69 Xmax mm: 17.5 RMS power(Watts): 800 Watts Max power(Watts): 1600 Watts Mounting Depth: 6.46" (164 mm) Mounting Diameter: 8.98" (228 mm)
- White powder finish heavy duty stamped basket with perimeter vents for better voice coil cooling
- Kevlar fiber enforce non pressed paper cone
- 3 layer foam surround
- Impedance Ohm: Dual 4
- Mounting Diameter: 228mm
Product description
This Listing Includes: Subwoofer Features: - Heavy Duty Die Cast Basket with Black Powder Finish - Kevlar Fiber Added Non-press Paper Cone - Red Stitched Hi-roll Ribbed Foam Surround - Kevlar Woven Composite Dust Cap - 2.5" 4-Layer High Temperature Voice Coil - Reliable Black Poly-cotton Spider System with Mirror Image - Arrangement, Top Spider with Woven Tinsel - Double Stacked 150oz Strontium Magnets - Double VC Cooling Motor Design - Rubber Magnet Boot and Rubber Gasket - Dual 4 Ohm Impedance - 800 Watts RMS Power - 1600 Watts Max Power
- 800 Watts RMS Power; 1600 Watts Max Power
- Dual 4 Ohm Impedance
- Heavy Duty Die Cast Basket with Black Powder Finish; Kevlar Fiber Added Non-press Paper Cone
- Red Stitched Hi-roll Ribbed Foam Surround; Kevlar Woven Composite Dust Cap
- 2.5" 4-Layer High Temperature Voice Coil
Product description
Skar Audio created this custom loaded enclosure package to deliver powerful, deep, and tight bass in an all-in-one competition-grade system. This package features two, 10-inch, dual 4-ohm, Skar Audio SDR Series subwoofers, which are pre-loaded and wired up inside of a custom dual 10" ported enclosure. Next, we pair the loaded enclosure of this package with the Skar Audio RP-1200.1D Class D mono-block amplifier, the perfect amplifier to power your new system and matched for perfect compatibility and power handling with the included subwoofers. Finally, we include a premium Skar Audio 4 Gauge OFC premium amplifier wiring kit to install your new system, making installation hassle free. The Skar Audio SDR series of subwoofers were designed to deliver hard hitting, low spectrum sound. Featuring a high flux ferrite motor, these versatile 10-inch woofers are conservatively rated at 1,200 watts max power each. When looking for a system that delivers low end frequencies with authority, look no further. This is the perfect solution for a daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. The enclosure housing the subwoofers features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 2,400 Watts
- RMS Power: 1,200 Watts
- Includes x1 Skar Audio SDR-2X10D4 Dual 10" Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
User questions & answers
Question: | Do i need a second battery for this amp |
Answer: | Support@skaraudio.com they have been a great help to me will respond within 24 hours M-F |
Question: | Does this come with a base adjustment knob |
Answer: | Yes hp on works on the channel you switch it to channel 5 shouldn’t have that option |
Product description
The XFL Series accurately reproduces the best possible sound quality in today's digital music. this specially designed subwoofer executes power and sound that leaves the competition far behind. With its rock solid structure and clean power output, our reliable XFL subwoofers will make you automobile come alive with power and sound.
- 1000-watt(1000W) RMS/2000-watt(2000W) Max. 7.6 " mounting depth Dual 4 ohm 3" voice coils
- DIE CAST ALUMINUM BASKET CARBON-KEVLAR ENFORCED NONPRESS PAPER CONE NT MULITLAYER HIGH DENSITY FOAM SURROUND TRIPLE STACKED 220 oz. MAGNETS
- Multi pieces of new comex spiders cooling pump motor design uni-rubber gasket and rubber magnet boot
User questions & answers
Question: | Will this push hard with a 2500 acoustik amp |
Answer: | I have a skar 1500d pushing one. Works great |
Question: | Will a planet audio 4000 watt amp monoblock push 2 subs of these |
Answer: | 1200 I believe. |
Question: | Will it fit in a 2018 nissan titan crew cab |
Answer: | I think it would work but probably best in ported not sure but this a sq sub I had mine's in a ported box and sounded good |
Question: | Will a 10000 watt power Acoustik edge amp push 4 of these |
Answer: | Skar 1500.d or 1200.d |
Product features
American Bass
The XFL's specially designed subwoofer executes power and sound that leaves the competition far behind. The XFL series has set many world records at different competition arena and reproduces the best possible sound quality. With its rock-solid structure and clean power output, our reliable XFL subwoofers will make your automobile come alive with power and sound.
Product description
The Skar Audio DDX-10 D4 is a competition grade, 10-inch, dual 4-ohm, car subwoofer. The DDX line-up was engineered by Skar Audio to be an SPL grade woofer that could also be utilized in daily system applications, allowing non-competitors to use the same subwoofers as those competing in the lanes. Every component used in the design of these woofers is of the highest quality for reliability and increased performance. Conservatively rated at a 1,500 watts peak power and 1,000 watts RMS power, this subwoofer was engineered to be extremely loud. Featuring a massive double stack motor (202 oz), 2.5" pure copper high temperature voice coil, and a competition grade pressed paper cone stitched to the high roll foam surround, the woofer comes equipped ready to handle serious amounts power. Dual 4-ohm voice coil configuration. Specifications - Peak power: 1,500 Watts, RMS power: 1,000 Watts. Sensitivity (SPL): 83.6 dB, Frequency Response: 40 - 500 Hz, Fs: 48 Hz, Qts: 0.53, Qms: 4.6, Qes: 0.59, Bl: 27.1 n/a, Vas: 8.7 L. Subwoofer Mounting Depth: 6.10", Subwoofer Cut-Out Diameter: 9.25".
- 10-inch Dual 4 Ohm Competition Grade Car Subwoofer
- Peak Power: 1,500 Watts | RMS Power: 1,000 Watts
- Massive Double Stack Magnet & High Temperature 2.5" Copper Voice Coil
- Competition Grade Paper Cone Stitched to High Roll Foam Surround
- Advanced Air Flow Cooling Design | Fs: 36.2 Hz
- Frequency Response Range: 28 Hz - 300 Hz | Sensitivity (SPL): 83.6 dB
User questions & answers
Question: | What is the best amp i can use for a pair of these sub |
Answer: | No it is not |
Question: | What kind of amplifier would I need for to the speakers |
Answer: | I had no issues pushing the stock sub .. |
Question: | Can 2 ddx 12s dual 2 ohm handle my 4000w amp? and what ohm should i wire them |
Answer: | Subwoofer. I have it pushing 2 JL Audio 12"s. |
Question: | I have a 1600watt mono pioneer amp and im looking to get 2 of these. Will they handle 1ohm |
Answer: | Yes |
Product features
Product Specification
- Dual 4 Ohm Voice Coil Configuration
- Peak Power: 1,500 Watts
- RMS Power: 1,000 Watts
- Competition Grade Pressed Paper Cone
- Stitched High Roll Foam Surround
- Advanced Air Flow Cooling System
- 2.5" High Temperature Copper Voice Coil
- Motor Weight: 202 oz
- Frequency Response: 28 - 300 Hz
- Sensitivity: 83.6 dB
Product description
The xo Series subwoofers are terrific all around speakers for Dual voice coil setups. There are few subs available today that can match the quality and price of this long running American bass Classic.
- 350W RMS/700W peak power Dual 4 ohm voice coils 50 oz. Magnet w/100 oz. Motor structure
- Oversized double stitched butyl rubber Surround 2" 4-layer voice coils chrome plated spring loaded terminals
- Heat pump, intercooled motor cooling system jet Black carbon mica injection molded cone. 5.6" mounting depth
Product description
American Bass 15" Subwoofer 3000 Watts Max DVC 4 Ohm XR-15D4 American Bass has designed the XR series subwoofer for the ultimate low bass enthusiast. The XR series will deliver crisp bass surpassing the competition. Newly re-designed, the wire terminals are all repositioned to one side of the speaker for easy installation. Consisting of a fiberglass reinforced cone, cast frame, and stitched rubber surround. With this subwoofer packing in a DVC 4 ohm 3" aluminum voice coil pumping out a max power of 3000 watts, it'll deliver nothing but pure quality bass for everyone to hear! Features 15" Subwoofer RMS/ MAX Power: 1500W/3000W Stitched Rubber Surround Fiberglass Reinforced Cap DVC 4 Ohm 3" Aluminum Voice Coil 200 Oz Magnet Structure PVC Gasket Ring PVC Magnet Boot Nominal Impedance: 4 + 4 Sensitivity: 86dB Frequency Range 33Hz-500Hz Mounting Depth: 8.66" Cut-out Size: 14.09"
- RMS/ MAX Power: 1500W/3000W
- Stitched Rubber Surround
- DVC 4 Ohm 3" Aluminum Voice Coil
- 200 Oz Magnet Structure
- Frequency Range 33Hz-500Hz
User questions & answers
Question: | Are these better than the american bass xfl |
Answer: | I've had both. They both are great. The xfl had more upper frequency output but still does great down low. The xr was thundering without all the upper notes being as loud. Also depends on the box but I had both in the same box |
Question: | How do i decide between this and the rockford fosgate p3d4-15 punch p |
Answer: | I had a p3 12 and killed it really easy. Only name brand sub ive ever blown. I have a xr 15 that i got after an American Bass Elite 12, the elite is a mid grade and that 12 hits harder than almost anything ive heard. The 1 xr 15 literally rattles my ear drums with only 1000rms out of the 1500. Id get American Bass, im new to them but they are my new sub brand hands down |
Latest Reviews
View all
Baby Jumper Doorway
- Updated: 31.03.2023
- Read reviews

Bluetooth Speaker Sonos
- Updated: 19.07.2023
- Read reviews

Gold Bracelet For Men 24K
- Updated: 17.06.2023
- Read reviews

Home Comforts Thermostats
- Updated: 17.05.2023
- Read reviews

Christmas Ball Ornaments
- Updated: 01.03.2023
- Read reviews

Baby Jumper Doorway
- Updated: 31.03.2023
- Read reviews

Bluetooth Speaker Sonos
- Updated: 19.07.2023
- Read reviews

Gold Bracelet For Men 24K
- Updated: 17.06.2023
- Read reviews

Home Comforts Thermostats
- Updated: 17.05.2023
- Read reviews

Christmas Ball Ornaments
- Updated: 01.03.2023
- Read reviews

Baby Jumper Doorway
- Updated: 31.03.2023
- Read reviews