14 best pair of component speakers

Product description

General Features:

• Alpine S-S69C 6" x 9" 85W RMS 2-Way Component Speakers System
• Power Handling:
  • Peak: 520 watts per set / 260 watts each side
  • RMS: 175 watts per set / 85 watts each side
• Carbon-reinforced polypropylene cone
• Rubber surround
• 1" Silk dome tweeter
• CEA-2031 compliant speakers
• Top-mount Depth: 2-15/16"
• 4 ohms impedance
• Frequency Response: 65 - 22000 Hz
• Sensitivity: 90dB
• 1 Year Manufacturer's Warranty
• Authorized Internet Dealer

• Make sure this fits. by entering your model number.
• Features: Component speaker system includes 2 woofers and 2 tweeters, 6"x9" carbon fiber-reinforced plastic woofer cone with specialized rubber surround, 1" silk dome tweeter with inline crossover, Handles up to 85 watts RMS (260 watts peak power), Frequency response: 65-22,000 Hz, Sensitivity: 90 dB, Woofer top-mount depth: 2-15/16", and Grilles not included

User questions & answers

Question:	Is it necessary a crossover to use them
Answer:	No tweeter has in line filter
Question:	Is it necessary to use these with an amp or can they be used off of an aftermarker head unit
Answer:	Problem with not powering aftermarket components without an amp is distortion from being underpowered via the approximate 24wrms headunits put out and that in itself will blow speakers. When powered via an external amp speakers can be turned up but with appropriate power giving loud and clear sound. Head unit alone will need to be turned up towards max to achieve loudness but with that again comes distortion and poor sound quality at higher volumes

• The Punch P165-SI is an exceptional 2-way component speaker system featuring a pair of 6.5" midrange speakers and a pair of 1” tweeters, delivering our signature Rockford sound
• The P165-SI 4-Ohm black speakers and tweeters come as a pair each, have a power handling of 60 Watts RMS/120 Watts Max and include grilles, flush and surface (angled) tweeter mount, and mounting hardware
• Featuring a PEI dome tweeters, built-in crossovers and injection molded mineral filled polypropylene cone with santoprene rubber surround that all provide high output and accurate frequency reproduction
• FlexFit2 basket design utilizes a slot mounted frame pattern, allowing for variable adjustments to the mounting position
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	I am caught between these p165si, and the p165se. The only difference I can find is internal vs external crossover. Are there any other differences
Answer:	its 75W RMS each, left & right. total 150WRMS.
Question:	will these fit in 2011 chevy silverado
Answer:	No.. Just for the 6.5 inch came.. I want you to send the grills of 3 inch
Question:	I have a gmc Seirra 1500 2005 do they fit my truck
Answer:	They do have a rounded base so you can put them at a slight angle. You can Google and download the install sheets.
Question:	How big of an amp do i need to use to run 2 sets of these speakers
Answer:	What you are looking at is 2 Tweeters & 2 6x9 bass speakers. It comes with 2 crossovers as well. To complete the 3 Way Component system: ~ What you can do is buy the 2” Mid speakers separate & then connect them to this system. Those 2” Mids also come with 2 more crossovers. It sounds great. I just installed this in my FJ CRUISER. Welcome to contact me with anymore questions. You Can Follow Progress here... Instagram: @Babyota_

Product features

Signature Sound in a Component Design

Experience true Rockford sound in our 2-way component speaker system, including a pair of 6.5" mid-range woofers and a pair of 1" PEI dome tweeters.

The P165-SI features a FlexFit basket for compatibility with various factory speaker mounting locations and a sweet ICC (Integrated Concealed Crossover) built into midrange basket, eliminating the need to mount any black boxes.

Car audio fanatics will love the Punch P165-SI component speaker system, rocking 60 watts of RMS power.

Flex Fit Basket Design

The slot mounted frame pattern of the Flex Fit basket utilizes slots instead of single screw sized holes. This allows for a slight adjustment of the speaker when mounted for a better fit.

Tweeter Mounting

Our DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. Flush and surface (angled) tweeter mounting hardware included.

Integrated Crossover

The Integrated Concealed Crossover hides the crosssover inside the basket, creating a cleaner look and easier installation. It also ensures the right frequencies are sent to the proper driver for the best quality sound with maximum protection.

• Includes: 6x8 speakers. tweeters. Crossovers. Grills. Flush and surface Mounting accessories. Speaker wire. Features: Rockville RV68.2C 6x8 and 5x7 Component car speakers (pair). Peak Power Rating: 900 Watts per Pair / 450 Watts Each. CEA Compliant RMS Rating: 170 Watts per Pair / 85 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids
• Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover. Frequency response: 32-22,000 Hz. Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters
• Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52". Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. Cotton spider material. Copper terminals. Cutout diameter: 7.36 x 5.12. Magnet: 13.5 Oz Y25 magnet
• Magnet dimensions: 90mm x 15mm. Fs: 65.102 hz. Re: 3.6 OHM. Qes: 1.663. Qts: 1.173. Qms: 3.977. Fits 6x8 and 5x7 openings. Top mounting depth of woofer: 2.52 Inch (95% of installs use the top mounting depth). Bottom mounting depth of woofer: 2.87 inch (This measures the speaker from top to bottom). Top mounting depth of tweeter: 0.79. Bottom mounting depth of tweeter: 1.18
• Tweeter mounting diameter: 1.93

User questions & answers

Question:	Is it just 2 speakers or is it 4 speakers
Answer:	Yes, it should with ample storage room. I have a TruckWay 7" GPS that fits very well in this case even with the extra accessories I put in the larger compartment. My Set-up: Top compartment: TruckWay GPS unit with mount removed Bottom Compartment: MPOW adjustable windshield mount x 2, charge cable for GPS unit, 3a dual USB car charger, 11-1/2 foot Charge cable for dashcam and 3 meter USB Type-C charge cable. Everything fits well and with some thoughtful packing I could probably get more in this case with no problem
Question:	So this says two pairs. So its correct to assume 4 speakers and 4 tweeters correct
Answer:	This wil fit a 6-7" GPS . I have a 7"and it fits perfect. i have room in the bottom for the window clip on. Cord and usb cord so it all stays together.. I even put other things inthat i use in the car. I love this and its not bulky..
Question:	Do you need an amp for these to work very well or can they function just as good with my pioneer avh nex 4200 radio
Answer:	Yes it will fit.
Question:	Just double checking its 4 speakers right
Answer:	I bought the 8" OverDryve and the windshield mount came with it. It broke in less than a month. I went to Walmart and bought a tablet windshield mount for $9 and it works great.

Product features

2 Pairs Rockville RV68.2C 6x8/5x7 Component Car Speakers 1800 Watts/340w RMS CEA

Includes:

• 6x8” speakers
• tweeters
• Crossovers
• Grills
• Flush and surface Mounting accessories
• Speaker wire

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. We use top quality polypropylene cones which are known for their high damping qualities. This means they can have a controlled break-up, which results in a smoother high frequency roll-off. Our Flexmotion Butyl Rubber Surrounds give the speakers a smooth response with minimal distortion. For smooth and extended high frequency sounds we used high temperature PEI dome tweeters with ferrite magnets. The RV series speakers are designed with superior SPL response and extremely high power handling making these perfect for use with the amp built into your receiver or with a high powered external amplifier. Due to their shallow mount design, these speakers fit in 97% of all vehicles.

CEA Rated

Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

Top of the line components!

Rockville speakers only use the best sourced components. We use efficient and high powered magnets along with aluminum voice coils wound with 100 % oxygen free copper. We pay attention to every detail ensuring you get the best sound in your car.

Product description

What we sell?

New Gravity 600C 6.5-Inch 500 Watts 2-Way Car Audio Component Speakers System 6-1/2 Inches (2 Pairs)



Product Highlights:

Here is a very well put together 6.5 inch car component speaker from a great electronics company. It includes mid-bass, tweeter and cross-over components to produce a very good sound quality. It’s hard to see anyone disappointed with this 6.5 inch car component speaker for the price they pay for it.

This speaker is rated for 170 watt RMS power and 500-watt peak power. That is plenty of power for it to produce some nice high, mid-level and even lower bass sounds.



These speakers offer a IMPP woofer cone for added low end bass response, while the separate balanced dome tweeters will definitely improve the clarity and precision of the higher range music notes. The SGRC series is a great low cost speaker series that will greatly improve the sound without breaking the bank.



Technical Details:

6-1/2" 2-way component speaker set

170 watt RMS with 500-watt peak power for the Pair

85 watt RMS per Speaker

Recommend at least 600-watt Amplifier to maximize the speaker.

Aluminum Voice Coil: 1" / Imp: 4 Ohm / Freq Resp: 32Hz-22kHz

Max. Input Power: 500W / Sensitivity: 93dB/1w/1m / Magnet: 8 Oz

IMPP Cone with Carbon Fiber Finish and Butyl Rubber Surround

Professional 2-Way Crossover in Transparent Color

Ferro Fluid Cooled 12dB/Octave Roll Off

Frequency response: 70 - 20,000 Hz

Sensitivity: 92 dB

Injection molded polypropylene woofer

Treated woven cloth surround

1" balanced dome tweeter

Tweeter can be surface or flush mounted with included hardware

• 6-1/2" 2-way component speaker set (4 Bass, 4 Tweeters, 4 Crossovers)
• 170 watt RMS with 500-watt peak power for the Pair
• Aluminum Voice Coil: 1" / Imp: 4 Ohm / Freq Resp: 32Hz-22kHz
• IMPP Cone with Carbon Fiber Finish and Butyl Rubber Surround
• Professional 2-Way Crossover in Transparent Color

Product description

This bundle contains a pair of Alpine R-S65C R-Series 6.5" Component 2-Way Speakers & a pair of Alpine R-S69 6x9" 2-Way Coaxial Speakers Alpine R-S65C 6.5 Inch Component 2-Way Speakers CTA-2031 Specifications: 100W RMS, 300W Peak, 4 Ohm Frequency Response: 65Hz-29kHz 100 Watts RMS 300 Watts Peak Ultra Smooth 1" Silk Dome Tweeter Swivel Tweeter Mounting H.A.M.R. Surround (Patent Pending) Multi-Layer Hybrid Fiber Cone Large Square Wire Dual-Layer Voice Coil High-performance Linear Drive Motor Alpine R-S69 R-Series 6x9-inch Coaxial 2-Way Speakers CTA-2031 Specifications: 100W RMS, 300W Peak, 4 Ohm Frequency Response 60Hz-29kHz Ultra Smooth 1" Silk Dome Tweeter Swivel Tweeter Mounting H.A.M.R. Surround (Patent Pending) Multi-Layer Hybrid Fiber Cone Large Square Wire Dual-Layer Voice Coil High-performance Linear Drive Motor Type-R speakers have been known for their dependability and sound performance at a mid-line price. Chances are, you’ve heard the Type-R speakers and appreciated the loud & fun listening experience. BUILDING ON AN ICONIC SPEAKER The Type-R speaker has been an iconic part of the car audio industry for many years but it was time for a modernization of the brand. Type-R speaker performance was certainly top notch but there is always room for improvement. Rather than redesigning the speakers from scratch, we kept the fundamental Type-R sound & style characteristics and updated them. MORE REALISTIC HIGHS The R-Series speakers use a new ring-type tweeter voice coil for increased efficiency and better tonal balance across the entire sound band, for improved overall sound quality. A MORE BALANCED TRANSITION The Wave Guide enhances in-car sound dispersion and helps eliminate phase distortion. Alpine’s unique Dynamic eXpander ring stiffens the cone around the Wave Guide, eliminating a big source of distortion in typical designs caused by cone flexing.

• CTA-2031 Specifications: 100W RMS, 300W Peak, 4 Ohm
• Using the highly successful Type-R speakers as a foundation, we applied various performance and hardware improvements to the design, essentially transforming them into the new R-Series speakers – The Next Evolution of Proven Performance.
• Ultra Smooth 1" Silk Dome Tweeter - Swivel Tweeter Mounting
• Multi-Layer Hybrid Fiber Cone - Large Square Wire Dual-Layer Voice Coil

User questions & answers

Question:	Does this set come with the two tweeters as pictured
Answer:	Water resistant not water proof.
Question:	Does this kit come with crossovers for the tweeters
Answer:	I doubt it. They don't lady long. Don't waste your money.
Question:	Best amp for these
Answer:	No they are not. They’re like regular sneakers & very comfortable
Question:	Will the 6.5 give my truck more bass. I have the alpine type s 410 and I like to have bass
Answer:	They are a full leather upper shoe, they breath about as good as any other. With inserts they are very comfortable as I am on my feet 10 hours a day and the slip resistant sole is one of the better I have had.
Question:	Does this come with a carry case
Answer:	You have to remove the lid to drink from the thermos. We have introduced thermo travel bottles as well, with flip tops, if you would prefer that convenience.
Question:	used to clean dust from computers
Answer:	The inner material is stainless steel.
Question:	Is there a compatible wall charger/plug for this unit
Answer:	Hello! The infuser does not have a lid so if you would like to drink from the tumbler with the infuser in place, I suggest putting the tea in the bottom of the tumbler so the infuser could block the tea leaves.
Question:	Does the length (11+ inches) include the nozzle on as shown in the picture, or is that the length with the nozzle removed
Answer:	Hi Sara! Thanks for asking. Yes, the NiftyCORE tumbler will fit perfectly in your standard-sized car cup-holder. Alice NiftyCORE

Product description

Memphis Audio 6.5" Pro Audio Component Set These pro audio components are designed for massive power handling when you need to turn the volume to extreme levels. Mids and highs loud enough to contend with massive Memphis bass is what the MOJO Pro audio line is all about. MOJO Pro components only have one thing on their mind... Getting LOUD! MJP62C pro component sets feature 2 MJP6 woofers, 2 MJPT25 tweeter and crossovers in one set. The pro audio components push sound to excruciating levels with a massive peak power handling of 250 Watts. The accordion style cloth surround withstands extreme excursion when the volume dial is turned up. Features Two 6.5" Mid range speakers, two 1" tweeters & two crossovers Multi-application use Accordion cloth surround Aluminum dustcap Mesh grills included MJP6-6.5" Woofer Size- 6.5" RMS/Peak- 125/250 Sensitivity dB- 100 Impedance- 4 Mounting Depth-2.81 MJPT25-1" Tweeter Size- 1" RMS/Peak- 100/200 Sensitivity dB- 105 Impedance- 4 Ohm

• Two 6.5" Mid range speakers, two 1" tweeters & two crossovers
• Multi-application use
• Accordion cloth surround
• RMS/Peak- 125/250
• Impedance- 4

Product description

This bundle contains two pairs of Alpine R-S65C R-Series 6.5" Component 2-Way Speaker Sets Alpine R-S65C 6.5 Inch Component 2-Way Speakers CTA-2031 Specifications: 100W RMS, 300W Peak, 4 Ohm Frequency Response: 65Hz-29kHz 100 Watts RMS 300 Watts Peak Ultra Smooth 1" Silk Dome Tweeter Swivel Tweeter Mounting H.A.M.R. Surround (Patent Pending) Multi-Layer Hybrid Fiber Cone Large Square Wire Dual-Layer Voice Coil High-performance Linear Drive Motor Type-R speakers have been known for their dependability and sound performance at a mid-line price. Chances are, you’ve heard the Type-R speakers and appreciated the loud & fun listening experience. Using the highly successful Type-R speakers as a foundation, we applied various performance and hardware improvements to the design, essentially transforming them into the new R-Series speakers – The Next Evolution of Proven Performance. BUILDING ON AN ICONIC SPEAKER The Type-R speaker has been an iconic part of the car audio industry for many years but it was time for a modernization of the brand. Type-R speaker performance was certainly top notch but there is always room for improvement. Rather than redesigning the speakers from scratch, we kept the fundamental Type-R sound & style characteristics and updated them. MORE REALISTIC HIGHS The R-Series speakers use a new ring-type tweeter voice coil for increased efficiency and better tonal balance across the entire sound band, for improved overall sound quality. A MORE BALANCED TRANSITION As with many high-end speakers, the Type-R components incorporate Wave Guide technology in the form of a phase plug in the center of the woofer cone. The Wave Guide enhances in-car sound dispersion and helps eliminate phase distortion. Alpine’s unique Dynamic eXpander ring stiffens the cone around the Wave Guide, eliminating a big source of distortion in typical designs caused by cone flexing.

• CTA-2031 Specifications: 100W RMS, 300W Peak, 4 Ohm
• Using the highly successful Type-R speakers as a foundation, we applied various performance and hardware improvements to the design, essentially transforming them into the new R-Series speakers – The Next Evolution of Proven Performance.
• Ultra Smooth 1" Silk Dome Tweeter - Swivel Tweeter Mounting
• Multi-Layer Hybrid Fiber Cone - Large Square Wire Dual-Layer Voice Coil

User questions & answers

Question:	what is in the box how many speakers and tweeters
Answer:	Heel is approximately 1/2", looks bigger because it is different color than upper.

Product description

Are you looking for that amazing sound and good quality music in your car? Music is a great companion when you are on the road, but most cars on the lot come equipped with low-quality factory speakers that do not do your favorite tunes justice. Here is Audiotek 65C 6-1/2 Inch 2-Way Component Speaker for your keen passion of music. Let’s see some features and technical details of this speaker. -6-1/2" 2-way component speaker set. -340 watt RMS with 1000-watt peak power for the Pair. -170 watt RMS per Speaker. -Recommend at least 1000-watt Amplifier to maximize the speaker. -Aluminum Voice Coil: 25mm / Imp: 4 Ohm / Freq Resp: 65Hz-20kHz. -Max. Input Power: 1000W / Sensitivity: 90dB/1w/1m / Magnet: 10 Oz. -IMPP Cone with Carbon Fiber Finish and Butyl Rubber Surround. -Professional 2-Way Crossover in Transparent Color. -Ferro Fluid Cooled 12dB/Octave Roll Off. -Frequency response: 65 - 20,000 Hz. -Sensitivity: 90 dB. -Injection molded polypropylene woofer. -Treated woven cloth surround. -1" balanced dome tweeter. -Tweeter can be surface or flush mounted with included hardware. We are getting incredibly good feedback and reviews from high quality music lovers and our valued customers.

• 6-1/2" 2-way component speaker set
• 340 watt RMS with 1000-watt peak power for the Pair
• Aluminum Voice Coil: 25mm / Imp: 4 Ohm / Freq Resp: 65Hz-20kHz
• Max. Input Power: 1000W / Sensitivity: 90dB/1w/1m / Magnet: 10 Oz
• IMPP Cone with Carbon Fiber Finish and Butyl Rubber Surround

• HIGH QUALITY CAR AUDIO SPEAKERS | Looking for high end car audio speakers that will not break the bank? Our high performance component speakers are some of the very best replacements for your factory or aftermarket speakers! These high fidelity speakers have a mounting depth of only 2.4 Inch and churn out high end sound quality with its 6.5 Inch + 3 Inch Drivers. High-Energy Y30 Magnets assures the sufficient magnet force needed for high sensitivity and accurate sound reproduction.
• SOLD AS A KIT | GREAT SOUND QUALITY | These Car Audio Speakers outperform most aftermarket component speakers period! These great sounding 6.5 inch Component speakers Feature: 150 Watts RMS / 600 Watts MAX / @ 4 Ohm, 93dB, 50Hz - 20KHz, Fully Isolated Tinsel Leads to Eliminate Crosstalk, High Quality Cloth Spider With Polyester Fiber, and 25mm Silk Diaphragm Tweeter With Ferro Fluid.
• GUARANTEED TO LAST | Are you frustrated with factory car door speakers that crack, snap and pop or even blow out over time? These heavy duty, high end car audio speakers are guaranteed to last! Built with Custom External 12dB Linkwitz–Riley Crossovers and Custom Designed Pole Piece for Low Distortion and Sound Quality
• HIGH PERFORMANCE CAR SPEAKERS YOU WILL EVER NEED | These are the only 6.5 inch Component car speakers you will ever need! With high quality construction, great sound and long-lasting performance, our dual car speakers are perfect fit for your Lincoln Town Car Speakers, BMW Car Speakers.
• MASSIVE AUDIO QUALITY GUARANTEED | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.

User questions & answers

Question:	is there any way to get grills for the 3" midrange speakers
Answer:	hello. it is 1+16G memory.
Question:	they are 75 rms not 150! why the deceptive labeling???? 150rms means left and right not the sum of both channels!! why did you label it like that
Answer:	hello, you can change the brightness in the setting. if it still fails, please send a picture for our reference. in addtion, about Maps, could you tell me more？ we will try our best to help. waiting for your message, you can contact us via Amazon or [email protected].
Question:	Are those 150rms per speaker or per set
Answer:	Double din car stereo with backup camera, reversing image will show on the car screen automatically when the reverse gear, and we provide free camera.
Question:	Does this set come with the grilles for bothe the 6.5" and the
Answer:	Yes, you connect the "ILL" wire, then you can light up the buttons.

Product features

FC Series Component Speakers

Make superb sound reproduction with high SPL a reality with the FC Series 3-Way Component Speakers. The UV protected low mass woven fiber cone bounces on a Cloth Nomex Spider producing 93dB sensitivity and is bonded to a surround of soft flexible Butyl rubber assuring smooth, fast, hard hitting sonic playback.

• Features of X6.5C: Pair Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers and Titanium Tweeters, 6.5” Woofers for Mids and Bass, 2” Aluminum Tweeters with Titanium Diaphragms, Audiophile Crossovers (these are very expensive crossovers with a lot of copper coils in them for advanced sound filtering to give you the best sound quality)
• Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each, Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket
• Oversized 1.5” ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78” inches, Impedance: 4 Ohms, Tweeter Size: 3.86’' x 1.97” inches, Cutout Diameter of Tweeter: 2.80”inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off
• Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz – 20,000 Hz, Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1” Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-installed mounting screws included

User questions & answers

Question:	Grills included
Answer:	I purchased them for my wife and according to her normal shoe size. There are no problems with the fit.
Question:	How many crossovers
Answer:	I bought the tie shoes not the velcro, but they are very comfortable and very stable. I have mobility and balance issues and these have been great for me.
Question:	So do I get 2 6.5 speakers or
Answer:	They are light weight and wide.
Question:	Do these come with crossovers
Answer:	Bought larger size for man because of cheaper women"s price for same shoe. Lightweight term too relative to judge.

Product features

2 Pairs Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers

• Pair Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers and Titanium Tweeters
• 6.5” Woofers for Mids and Bass
• 2” Aluminum Tweeters with Titanium Diaphragms
• Audiophile Crossovers (these are very expensive crossovers with a lot of copper coils in them for advanced sound filtering to give you the best sound quality)
• Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each
• CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each
• Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids
• True Aluminum Bullet to give the woofer amazing sound
• Steel Stamped Basket
• Oversized 1.5” ASV Voice Coil
• 14 oz. High Quality Ferrite Magnet
• Cutout Diameter: 5.78” inches
• Impedance: 4 Ohms
• Tweeter Size: 3.86’' x 1.97” inches
• Cutout Diameter of Tweeter: 2.80”inches

Features of Included Crossovers:

• 2-Way Passive Crossover Network
• One Pair of 4-Ohm Audiophile Grade Crossovers
• Gold Plated Screw Terminals
• Hingtat 100V Capacitor Modules (Best in Class)
• High Quality CCAW Coil Windings (Best in Class)
• High Grade Polymer Capacitors (Best in Class)
• Woofer Frequency: 20 Hz - 3.5 kHz
• Tweeter Frequency: 3.5 kHz - 20 kHz
• 12dB Per Octave Slope (4 Ohms)
• Poly-Glass Styling to See Internal Components
• Air Cooled Spools
• Input, Tweeter Output, Mid-Bass Woofer Output
• 0dB, -3db, -6dB Selectable Tweeter Attenuation
• Crossover Point: 2,800 Hz

_________________________________________________________________________________________________________________________________________________________________

Features of Mid/Woofer:

• 6.5 Inch Mid/Bass Speakers Aluminum Bullet
• Design: Open-Basket Mid-Bass
• Sensitivity: 90dB
• Frequency Response: 110Hz-10KHz
• Impedance: 4 Ohms
• Reinforced Black Pulp Cone
• Linear Progressive Polyester-Cotton Composite Spider
• Aluminum Bullet Phase Plug High SPL Design
• High Tinsel Expanded Steel Basket
• Cloth surrounds reproduces very clean sound
• Zinc-Plated T-Yoke/Washers
• Super Slim Design Facilitates Door Installations
• 1.5 Inch High Temperature KSV Voice Coil
• 14oz. Magnet

_________________________________________________________________________________________________________________________________________________________________

Features of Tweeter:

• 2” Titanium Compression Horn Tweeter
• 1” High Temperature Die Cast Kapton Voice Coil
• Extremely loud and clear highs with an amazing frequency response that can even play some mids
• Ferro Fluid Enhanced Voice Coil Cooling
• Shallow Mounting Depth
• 10oz. Magnet
• Includes Mounting Hardware
• Impedance: 4 Ohm
• Cutout Diameter: 2.8” inches
• Mounting Depth: 1.66” inches
• Frequency Response: 2 kHz - 20 kHz
• Sensitivity: 96dB @ 1w / 1m

Product description

Alpine S-S65C 6.5" 80W RMS 2-Way Component Speakers System

• Features: Component speaker system includes 2 woofers and 2 tweeters, 6-1/2" carbon fiber-reinforced plastic woofer cone with specialized rubber surround, 1" silk dome tweeter with inline crossover, Handles up to 80 watts RMS (240 watts peak power), Frequency response: 70-22,000 Hz, Sensitivity: 88 dB, Woofer mounting depth: 2-5/16, and Grilles not included

User questions & answers

Question:	Well these fit 01 mazda mx
Answer:	W means width.
Question:	Will these fit my 2002 Subaru outback
Answer:	They are very supportive but do not have a separate arch support.
Question:	how many speaker with this package on your photo 1 set of 6.5 and 1 set of 6x9? correct me if i'm wrong
Answer:	Poor quality! Broken after one week wearing.
Question:	Hi, Will these fit my 1990 240 Volvo
Answer:	So far so good...

Product description

Revolutionize your car audio system when you install Hifonics 6.5 Inch 2 Way 400 Watt Component Speakers System (4-pack). The system comes with a pair of speakers, 12 dB in line crossover, all tweeter mounting hardware, and grills for midwoofers. The 6.5 inch speakers feature 60 watts of RMS power and 400 watts of maximum power handling. The neo mylar, soft dome, impact resistant tweeter elements provides clear highs to the 1 inch tweeter while handling plenty of power. The component speaker system also features rubber, moisture resistant rubber surround with high mid bass impact and lightweight, rigid, alpha cellulose cones for speed and deep bass.

• INCLUDES EVERYTHING YOU NEED: 12 dB in line crossover, all tweeter mounting hardware, and grills for midwoofers
• IMPACT RESISTANT: Neo mylar, soft dome, impact resistant tweeter elements
• HIGH MID BASS IMPACT: Rubber, moisture resistant rubber surround with high mid bass impact
• DEEP BASS: Lightweight, rigid, alpha cellulose cones for speed and deep bass
• CONSTRUCTED WITH STRONG TEMPERATURE RESISTANT ADHESIVE: High temperature adhesive bonds cone and surround

Product description

General Features: 

• Alpine R-S69C.2 6x9" 2-Way Component Speaker System 
• Hi-Res Ready 
• CFRP Carbon-Fiber Reinforced Polymer Woofer 
• CFRP Carbin-Fiber Reinforced Polymer Dome Tweeter 
• RMS Power Rating: 100 Watts (Each) 
• Peak Power Rating: 300 Watts (Each) 
• Frequency response: 60-40,000 Hz 
• Sensitivity: 90 dB 
• Woofer Top-Mount Depth: 2-7/16" 
• Grilles included 
• Authorized Internet Retailer
• 1 Year Manufacturer's Warranty

Features: Component speaker system includes two woofers, 2 tweeters, and 2 external crossovers, 6"x9" carbon-fiber reinforced polymer (CFRP) woofer, Carbon-fiber reinforced polymer dome tweeter, Handles up to 100 watts RMS (300 watts peak power), Frequency response: 60-40,000 Hz, Sensitivity: 90 dB, Woofer top-mount depth: 2-7/8", and Grilles included.

• Features: Component speaker system includes two woofers, 2 tweeters, and 2 external crossovers, 6"x9" carbon-fiber reinforced polymer (CFRP) woofer, Carbon-fiber reinforced polymer dome tweeter, Handles up to 100 watts RMS (300 watts peak power), Frequency response: 60-40,000 Hz, Sensitivity: 90 dB, Woofer top-mount depth: 2-7/8", and Grilles included.

User questions & answers

Question:	This fit a 2013 dodge challenger
Answer:	I would not put them in washing machine. I bout as work shoes and only used for work. They blew out in a couple months. I Stepped in wet grass and my feet were soaked for the rest of the shift. I bought some sketchers instead. No problems with them.

Product description

New Alpine R-Series R-S65C.2 speakers offer larger voice coils, new cone technologies, and better performance over the previous R-S65C models.Overall, the R-Series speaker is smaller, making them ideal for tight installations and use matching speaker grills that are shallower as well. The R-S65C.2 woofers have a larger 35 millimeter (mm) voice coil for increased motor control over the bass output verses the previous R-S65C. The R-Series speakers have been designed from the ground up utilizing an Alpine exclusive cone technology, CFRP: Carbon Fiber Reinforced Polymer. This high-strength, yet lightweight material is formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks. In addition, CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback.

General Features: 

•  Alpine R-S65C.2 6.5" 2-Way Component Speaker System 
•  Hi-Res Ready 
•  CFRP Carbon-Fiber Reinforced Polymer Woofer 
•  CFRP Carbin-Fiber Reinforced Polymer Dome Tweeter 
•  RMS Power Rating: 100 Watts (Each) 
•  Peak Power Rating: 300 Watts (Each) 
•  Frequency response: 65-40,000 Hz 
•  Sensitivity: 88 dB 
•  Woofer Top-Mount Depth: 2-5/16" 
•  Grilles included 
•  Authorized Internet Retailer
•  1 Year Manufacturer's Warranty

• New Alpine R-Series R-S65C.2 speakers offer larger voice coils, new cone technologies, and better performance over the previous R-S65C models.
• Overall, the R-Series speaker is smaller, making them ideal for tight installations and use matching speaker grills that are shallower as well.
• The R-S65C.2 woofers have a larger 35 millimeter (mm) voice coil for increased motor control over the bass output verses the previous R-S65C.
• The R-Series speakers have been designed from the ground up utilizing an Alpine exclusive cone technology, CFRP: Carbon Fiber Reinforced Polymer. This high-strength, yet lightweight material is formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks.
• In addition, CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback.