Product description

Pyle Model : PLG6C

6.5'' 2Way Component Speaker System

6.5'' 400 Watt 2Way Custom Component System

This Custom Kit Contains

One Pair 6.5'' Mid Bass Speaker

Standard 6.5'' Size Fits OEM Locations

Yellow Color Poly Injection Cone

NonFatiguing Butyl Rubber Surround

High Temperature Aluminum Voice Coil

Special Electroplated Steel Basket

40 Oz. Magnet Structure

Power Handling: 200 Watts RMS / 400 Watts MAX

Impedance: 4 Ohm

Frequency response: 50Hz5KHz

Mounting Depth: 2.65"

One Pair 0.5" Tweeter:

0.5'' Silk Dome Tweeter

Neodymium Magnet

3 Mounting Options: Flush, Surface or Angle Mount

50 Watts RMS / 100 Watts peak

Frequency response: 1.322KHz

Impedance: 4 Ohm

One Pair Passive Crossover Network:

Two Way Passive Crossover

12 dB Octave Slope

Accessories

Includes Grills Wires Installation Hardware

Wiring Kit

Wiring Diagram Template

Cutout Size: Φ142 mm

Get in gear with the Pyle Gear series These speakers are designed to provide the best quality sound for the budgetminded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' midbass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware it's a perfect way to upgrade and expand the range of your factory system. The midbass speakers pump with 400 watts of power and fit in most OEM locations. The 100watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the midbass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

Part of Pyle's Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware--it's a perfect way to upgrade and expand the range of your factory system.

6.5-Inch Mid-Bass Speakers

These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you'll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet.

1/2-Inch Tweeters

The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle's mounting locations and get the best possible treble focus.

Passive Crossover Networks

Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound.

Easy Installation

A full wiring kit and all the installation hardware you'll need to add this system to your vehicle are included, along with a wiring diagram.

About Pyle Audio

Pyle Audio's legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems.

Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous.

PLG6C Specs

What's in the Box

Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.

• 6.5” Mid Bass Speakers: The 6.5 inch woofer features an eye catching yellow color poly injection cone; Non fatiguing butyl rubber surround keeps your speakers secure and ensures that the product will last for a long period of time
• High Quality Sound: Listening to good music while on the road has never been this good; The component audio speaker has high temperature ASV voice coil which provides the richest sound, ensuring low distortion and providing an open sound stage
• Heavy Duty Component:The 40 oz magnet structure, special electroplated steel basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response; It features Standard 6.5” size that fits OEM locations
• Multiple Mounting Options: Allows 3 mounting Options flush, surface or angle; This 4 ohm component also features a mounting depth of 2.65”, ensuring your speakers will stay in place
• Wiring Kit Included: This audio speaker compensates the undersized wire found in many of today’s cars; Includes grills, wires and mounting hardware; Midrange tweeter helps to provide smooth & loud sound
• 400watt 2way custom component system includes pair of woofers, tweeters, and crossovers
• 6.5inch woofers with yellow poly injection cones and butyl rubber surrounds

User questions & answers

Question:	i will be installing these in my Toyota scion TC do i need to install these little cross over things or can i rock with out them please help
Answer:	Hello friend the unit support Carplay and Android Auto, if your car is Android system ,it will suitable and please note this unit is International Standard Double DIN , as long as your car is 2 DIN. It will fit very well.
Question:	I might pair these with boss ch6530 chaos series 6.5-inch 3-way speakers. which ones should i put in the front door
Answer:	Hello friend the unit is 7 Inch double din, it support Android auto and Carplay, if your car is double dDin, it will suitable regards Jacky
Question:	it states free shipping yet the item was $35.54..yet my total was $44.96 ????? where did the $9.42 go to
Answer:	On the description of the radio they list the Iphones that are compatible..
Question:	will they fit in a Harley davidson sattle bag
Answer:	It works with my iPhone 11

Product features

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Steel Basket

Get in gear with the Pyle Gear series These speakers are designed to provide the quality sound for the budget-minded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' mid-bass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware - it's a perfect way to upgrade and expand the range of your factory system. The 100-watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the mid-bass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

Product description

Pyramid Model : BNPS102

Dual 10'' 1000 Watt Bandpass Speaker System w/Neon Accent Lighting

Built-In Neon Accent Lighting

Two 10'' High Power 4 Ohm Sub-Woofers

Silver Polypropylene Cone

Specially Treated Black Rubber Edge Suspension

2'' High Temperature Aluminum Voice Coil

Bandpass Alignment For Extra Deep Bass

Plexi-Glass Front Window

4 Tuned Ports

1000 Watts Peak Power

Frequency Response: 35Hz-1K Hz

Dimensions: 14''D x 28.5''W x 13''H

The BNPS102 from Pyramid Car Audio features two 10-inch woofers in a custom-built band-pass box. This drop-in system is designed to create some serious bass, with a monster 1,000 watts of power handling and its bandpass design. As an added bonus, the built-in neon accent lighting gives it an attractive custom look.

High-Powered Subs

The BNPS102 comes loaded with two 10-inch high-powered Pyramid subwoofers. They feature a silver polypropylene cone for rigidity with good internal damping, to deliver more accurate and well-rounded low-end. Polypropylene is also known for its weather resistance, which is ideal for the temperature extremes common to automobile applications.

A specially treated rubber surround is also ready for a beating, and the 2-inch aluminum voice coil can handle high temperatures, for all-around performance no matter how hard you're hitting it.

Bandpass Design

Bandpass enclosures give you the best of both worlds. In this case, the two 10-inch subs are mounted inside a sealed chamber, which then deliver sound to the ported chamber through four specially tuned ports and into your vehicle. The result is a narrow frequency range with tons of volume, without sacrificing efficiency.

A Little Flash . . .

Sound may be everything, but a little bit of visual appeal never hurts. The BNPS102 features a plexiglass front window and built-in neon accent lighting with that in mind.

Two-Year Limited Warranty

Get some added peace of mind with your purchase thanks to Pyramid's two-year warranty.

BNPS102 Specs

What's in the Box

Pyramid BNPS102 enclosure and user's manual.

• SILVER POLYPROPYLENE CONE: This is for rigidity w/ good internal damping, to deliver a more accurate & well-rounded low-end. It is also known for its weather resistance, which is ideal for the temperature extremes common to automobile applications
• EXTRA DEEP ALIGNMENT: Car Subwoofer Bandpass Speaker System has a bandpass with an alignment of extra deep bass. It was made with extra deep bass to be able to produce a loud sound that makes you feel the vibrancy and have fun listening in your car
• RUBBER EDGE SUSPENSION DESIGN: This speaker system was designed a specially treated black rubber edge suspension, so the only vibrations you’ll be hearing will come from your music. A specially treated rubber surround is also ready for a beating
• BANDPASS DESIGN: Bandpass enclosures give you the best of both worlds. The two 10-inch subs are mounted inside a sealed chamber, which then delivers sound to the ported chamber through four specially tuned ports and into your vehicle
• 1000 WATTS PEAK POWER: This drop-in system is designed to create some serious bass, with monster 1,000 watts of power handling and its bandpass design. As an added bonus, the built-in neon accent lighting gives it an attractive custom look
• 1,000-watt subwoofer enclosure features two 10-inch subs in a custom bandpass box
• Subwoofers feature silver polypropylene cones, rubber surround, and high-temperature aluminum voice coil

User questions & answers

Question:	This is for toyota corolla
Answer:	Dear Customer, Welcome to HIGOGOGO Store. The HIGOGOGO floor pillow is made in China. This seat cushion has good rebound effect, breathable and comfortable, relaxing your hips. Hope for the cooperation with you. HIGOGOGO Service Team.
Question:	Would these fit in my 1999 pontiac grand am
Answer:	Dear customer, Welcome to HIGOGOGO store. This cushion is about 22x22 inch. It is not 18x18 inch. But there may be a little size difference due to manual meature and compressed packaging. The seat cushion will restore after you take it out from the compression bag for a few hours. Hope you like it. HIGOGOGO Service Team.
Question:	how thick is the plexiglass
Answer:	Dear Customer, Welcome to HIGOGOGO Store. You can wash the floor cushion by hand, then put the floor cushion in the ventilated place. The filling will be more fluffy after exposing in the sunlight for a few hours. Best Wish. HIGOGOGO Service Team
Question:	how do i install the light and gain control panel to the box i cant find a place to plug it in can u please tell me where i am suppose to attach it
Answer:	Hmmm. I knew I was just getting the case & the listing did say what size pillow. The case size should be sufficient to fig’r our pillow size.

Product features

1000W Dual Bandpass Speaker System

• Built-In Neon Accent Lighting, Two 10'' High Power 4 Ohm Sub-Woofers
• Silver Polypropylene Cone
• Specially Treated Black Rubber Edge Suspension
• 2'' High Temperature Aluminum Voice Coil
• Bandpass Alignment For Extra Deep Bass
• Plexi-Glass Front Window
• 4 Tuned Ports
• 1000 Watts Peak Power
• Frequency Response: 35Hz-1K Hz
• Dimensions: 14''D x 28.5''W x 13''H

Product description

Adventure around town accompanied by high-quality tunes. Bump up your current audio system with this Memphis Audio 6.5-Inch Speaker Component Set complete with mid-bass drivers, tweeters, and crossovers for the ultimate listening experience. Your bass will boom with these 6.5-inch speakers boasting 250 watts MAX power and 125 watts RMS power. The 1.5-inch voice coil improves efficiency and works alongside the 22-ounce magnet for optimal performance. Designed with a paper cone and cloth-treated surround for high sound pressure level, you get loud sound, perfect for jamming out and a durable design that lasts. The center phase plug, included tweeters, and crossovers are great companions, hitting all frequencies and ensuring you get peak audio performance. This sound system package includes 2 SRXP62 mid-bass drivers, 2 tweeters, and 2 crossovers. The speakers measure 6.5 inches long, 6.5 inches wide and have a mounting depth of 2.44 inches. Take your car audio to the next level with Memphis Audio 6.5-Inch Speaker Component Set. With speakers, tweeters, and crossovers, you get the trifecta of pro audio performance for clear, powerful sound.

• COMPLETE AUDIO PACKAGE: Component set includes 2 SRXP62 6.5-inch mid-bass drivers, 2 tweeters, and 2 crossovers for a complete audio package
• POWERFUL PERFORMANCE: Speakers handle 250 watts of MAX and 125 watts of RMS per speaker for powerful performance
• HITS ALL FREQUENCIES: 1.5-inch voice coil allows for higher power handling while center phase plug improves high-frequency response
• THOUGHTFUL DESIGN: Paper cone and cloth treated surround allow for high sound pressure level (SPL), and accordion design provides increased excursion and output
• NO GRILLS: Grills not included

User questions & answers

Question:	No ohm/ impedance listed
Answer:	There are no annual fees or subscriptions
Question:	Is this 125 watts per speaker or for pair
Answer:	Please find below download links of the WT6 user and quick guide manuals. Both are also available on our website. http://down.golfbuddyglobal.com/doc.asp?sc=2&filename=WT6_User_manual_us.pdf http://down.golfbuddyglobal.com/doc.asp?sc=2&filename=WT6_QuickGuide.pdf Hope this helps.
Question:	I installed 4 on my truck without the tweeters. They sound extremely bad but I think my radio is not supplying enough watt. What amp is recommended
Answer:	I had Same problem! They send me another same one but still Same problems I do not like this model

Product description

• Capacitance Tolerance: + / - 10%
• Working Voltage Range: 16 VDC
• Surge: 24 V
• Chrome Plated Posts
• Mounting Brackets and Hardware Included
• Dimensions: 11-9 / 16" (H) x 3-15 / 16" (D)
• 1 Year Warranty

User questions & answers

Question:	What's this what 1 resistor ??? I've had capacitors before. Never heard of this
Answer:	Yes and love it. I used it with my 1600W Pioneer GM-D8601 amp. Note: It is a large size cap so make sure you have room to mount it close to the amp - best place to mount caps.
Question:	I have a kicker 2400 watt amp and two kicker comp 15s my lights are dimming and there killing my battery. Would this help with my problems
Answer:	11 inches tall 5 inches wide
Question:	Does this work on a 1200 watt amp
Answer:	You can do that and run it at 8 OHMs “or” Get 2 OHM dual voice coil and you’ll be at 600 at 4 OHMs. Sub can handle 600w at 4OHMs peak from your amp. Setting your gain properly is key( ac Volts w/ Multimeter ) Wire it as follows:1) incoming power to speaker (+) to your choice of coil on the sub and attach it the the + terminal.2.) Cut a wire to a length to reach from the Negative terminal (-) to the other Positive (+) terminal of the second coil. 3.) simply attach the second coils negative(-) ternimal to Negative(-) wire from amp .
Question:	Hi, For the 2 farad cap, can you please give the exact length of the widest part of the mounting bracket
Answer:	Yes, but a larger amp would be better because normally boss audio amps don’t actually peak at what they say

Product description

Lanzar Model : HTG157

3000 Watt 2 Ohm Stable Mono Block Mosfet Amplifier

1 x 650W RMS @ 4 OHMS

1 x 1250W Peak @ 4OHMS

1 x 1500W RMS @ 2 OHMS

1 x 3000W Max @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

2 Ohm Stable

Nickel RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Freq. Response:10Hz~45KHz

LPF Freq. Response: 50Hz-250Hz

HPF Freq Response:80HZ

Fuse: 40A x1

Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp
• GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels

User questions & answers

Question:	Can I use this for my
Answer:	Yes, 2 fuse
Question:	Will this push 2 12" kicker comp r at 2 ohm
Answer:	Bought it a year ago and it sat in my closet. Never opened and went to install it. It didnt work. This is crap
Question:	do it have any fuse
Answer:	Yes
Question:	i have no sound.how do you get it to work
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio

• 1 x 650W RMS @ 4 OHMS
• 1 x 1250W Peak @ 4OHMS
• 1 x 1500W RMS @ 2 OHMS
• 1 x 3000W Max @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• 2 Ohm Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls

• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%.
• S/N Ratio: >90dB
• Freq. Response:10Hz~45KHz
• LPF Freq. Response: 50Hz-250Hz
• HPF Freq Response:80HZ
• Fuse: 40A x1

Product description

Most factory stereos, even high-end systems, protect speakers by reducing subharmonic output when the volume is high. That's okay in a regular system, but this bottle neck system will handicap low-frequency performance if you want to upgrade your factory stereo with amplifiers and subwoofers. The Earthquake Sound MB1 detects the input level from a factory stereo, then adds more bass at high volume levels while keeping your bass response balanced at low volume. Now you can keep your factory stereo looking flush and its steering wheel controls intact while actually improving the bass quality and depth. The MB1 wires up to any system easily, and can be mounted in the front or rear of the vehicle. It has two gold plated inputs and outputs plus it has a remote dash control for easy adjustments. The WIDE knob adjusts how wide of a frequency range the MB1 will affect. The SWEEP knob allows you to pick the center frequency (between 27Hz and 63Hz) that you want the MB1's restoration circuit to maximize.

• Advanced digital bass restoration system detects the input level from a factory stereo, then adds more bass at high volume levels while keeping your bass response balanced at low volume
• SWEEP and WIDE controls manage frequency ranges for extremely high precision, custom-built bass response
• Balanced inputs handle very high signal voltage up to 15 Volts and help minimize feedback
• Dash-mounted remote control knob
• Portable music enhancement with woofer protection circuitry

User questions & answers

Question:	Would this sound good on two L7 15's i want low bass around 20 hertz
Answer:	This will install a double DIN in a 2013 Jeep JK. Should work for a Double DIN up to year 2017 Jeep JK
Question:	Does this increase Output DB and will it work in either ported or Sealed box?Is it better used in either or box
Answer:	This is the mounting bracket. You will also need a wiring kit and probably an antenna adapter.
Question:	Can you control highs and mids with this as well
Answer:	It's a whole kit.. What they don't show you is the lip that the system sits on
Question:	Only one real question? Does it have switchable pfm modules
Answer:	Our Double Din kits will fit a 4"x7" stereo. If you have any other questions, please contact our Tech Support line at 1-800-363-4490 ext1.
Question:	what amp would you reccomend to push 6 of these and 6 ts-b350 tweeters
Answer:	No, this Kit will not work with your vehicle. The Scosche part that you need is ICFD3BN. For more information please contact Scosche Tech Support at 800-363-4490 Ext. 3. https://www.amazon.com/Install-Centric-ICFD3BN-Complete-Installation/dp/B01N8WKOUP/ref=sr_1_1?dchild=1&keywords=ICFD3BN&qid=1612301806&sr=8-1
Question:	Will this fit in the lower front door of a 2006 Tacoma
Answer:	No, this will not fit your specified vehicle. Please feel free to contact Tech Support 800-363-4490 Ext. 1
Question:	the price is one or two (the pair
Answer:	No, this definitely not for your truck. In fact, you're truck has two different possible install kits. Your truck will be very sub-model specific. For example, SVT, King Ranch, Platinum, Raptor, STX, etc. Between these sub-models there are two possible dash kits to use. One you can find on amazon is Scosche Dash Kit FD6205B. The other can't be found on Amazon and is the Metra 99-5830B. Both kits are made for Double Din decks, but also come with the attachment for Din sized stereos as well. Good Luck!
Question:	Hi. Price is for one or two? thank you
Answer:	No, our stereo install kits accommodate standard single DIN and double DIN stereos. They will allow a double DIN stereo with a max face size of 3 13/16 inches x 6 13/16 inches to fit. Not all aftermarket stereos offer the same size screens and some are considered oversized.

Product features

Pioneer TS-M800PRO 8" PRO Series Mid-Bass Driver

• 700 Watts Max Power (180 Watts Nominal)
• Optimally Blended Pulp Cone Woofer
• Designed for High Sensitivity and High Power Handling

The Pioneer Reference for Open Show series of speakers is designed specifically for those looking to produce some serious sound pressure levels. Inspired by Pioneer’s history of record-breaking SPL, the new P.R.O. series line of speakers is constructed with the street enthusiast in mind. With an emphasis on efficiency and power handling, the P.R.O. series lineup consists of bullet tweeters, mid bass drivers, and a subwoofer that can be mixed and matched to deliver impressive output, without requiring an impressive investment.

MB1 MEGA BASS Digital Bass Synthesizer

Most factory stereos, even high-end systems, protect speakers by reducing subharmonic output when the volume is high. That's okay in a regular system, but this bottle neck system will handicap low-frequency performance if you want to upgrade your factory stereo with amplifiers and subwoofers.

The MB1 detects the input level from a factory stereo, then adds more bass at high volume levels while keeping your bass response balanced at low volume. Now you can keep your factory stereo looking flush and its steering wheel controls intact while actually improving the bass quality and depth. The MB1 has two gold plated inputs and outputs plus it has a remote dash control for easy adjustments. The Sweep and Wide controls manage frequency ranges for extremely high precision custom built bass response.

Advanced Digital Bass Restoration System

The MB1 MEGA BASS Digital Synthesizer contains a bass maximization circuit that perfectly reproduces and pumps low frequency back into the voltage line. Therefore, this synthesizer will enhance bass impact when using CDs, cassettes, and portable media players.

Easy Access Dash Mount Control Center

The MB1 is designed to be mounted anywhere in your vehicle, with the exception of the obvious places like the bumpers and gas tank. Each MB1 comes with a dash mount control center which allows you to control the intensity of the system's bass output right from the driver's seat. In addition, the dash mount unit comes with a built-in dual LED that dims and brightens as the bass increases and decreases.

DPF (DC Protection Filter)

The MB1's DPF overdrive circuitry allows you to have massive, hard hitting, concrete shattering bass while protecting the speakers from DC failures, commonly found in other bass enhancement devices.

Bass Expander Limiter

The MB1's Bass Expander Limited circuitry allows it to enhance the bass output of any audio system while controlling damaging burps.

Installation and Wiring Configuration

MB1 MEGA BASS Digital Synthesizer needs to be installed in the signal path as close as possible to the source unit (between a head unit and an external amplifier), before any crossover circuit. Although the MB1 is close to the source unit's signal, it is usually mounted in the rear of the vehicle, as close as possible to the amplifiers. If you are using an equalizer, connect the MB1 to the SUB OUT of the equalizer and use it to drive the bass amplifier, as shown in the diagram.

Product description

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener’s preference. Oversized Plus One™ woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. Available in a range of standard sizes – 3", 4", 5-1/4", 6-1/2", 6" x 8" and 4" x 6" coaxial, 6" x 9" 3-way, and 5-1/4", 6-1/2", and 6" x 9" component – they’re the perfect upgrade from factory speakers.

• Infinity Premium Sound Quality
• Edge-driven, textile tweeters
• Adjustable tweeter output level
• Plus One woofer cone architecture
• Optimized Frame Size

User questions & answers

Question:	Are these sold as a pair or is it just
Answer:	It is a pair (2) speakers
Question:	Do these actually sound any different than the 9623IX with the two tweeters? Are the woofers the same
Answer:	When I yest listened th these, I was at cartoys. I did not hear a difference. I have hi frequency hearing loss, and these are great for me. I didn't see the need for the other tweeter.
Question:	Will these fit a 2001 Dodge Dakota
Answer:	It should, but you need to check sized with your existing speakers, you can also go to car toys, they'll tell you what will fit and then you can shop online
Question:	This speaker fit my 2010 Mini Cooper
Answer:	A lot of door speakers are 6x9, but you will need to check your car manual, or look online, or visit a shop like Car Toys to know for sure if you're not used to doing speakers on your own.