12 best cable speaker selectors
A cable speaker selector is a device used in audio systems, including car audio and home audio setups, to manage multiple speakers and direct audio signals to specific speakers or zones. Here's what you need to know about cable speaker selectors and their relevance to Coaxial Speakers, Car Audio, Car Electronics, and Electronics:
Speaker Selection: Cable speaker selectors allow users to choose which speakers receive audio signals from an amplifier or audio source. This is particularly useful in scenarios where you have multiple speakers in different rooms or zones and want to control which speakers are active.
Zone Control: In home audio systems, cable speaker selectors enable zone-based audio control. This means you can play music in one room while muting or playing different audio in another room.This flexibility is often used in multi-room audio setups.
Coaxial Speakers: Cable speaker selectors are compatible with various types of speakers, including coaxial speakers. Coaxial speakers combine a woofer and a tweeter in a single unit, making them a popular choice for car audio and home audio applications.
Car Audio: In the context of car audio, speaker selectors are less common compared to home audio systems. However, they can still be used in more complex car audio setups where users want to control different speaker configurations within the vehicle.
Multiple Audio Sources: Some speaker selectors allow you to switch between multiple audio sources, such as different amplifiers or audio inputs. This is useful if you have various audio devices connected to your speaker system.
Impedance Matching: To prevent damage to the amplifier and ensure the correct distribution of power, many cable speaker selectors come with impedance matching features. This ensures that the impedance of the speakers matches the amplifier's requirements.
Volume Control: Some speaker selectors have volume control for each zone or speaker, allowing you to adjust the volume independently in different areas of your home or car.
Protection Circuitry: Quality speaker selectors may include protection circuitry to safeguard against overload and short-circuiting, ensuring the longevity of your speakers and amplifiers.
Installation: Cable speaker selectors are typically installed between the amplifier and the speakers. Proper installation is crucial to ensure that the audio signal is distributed correctly to the selected speakers.
Remote Control: Advanced models may include remote control options, allowing you to manage speaker selection and volume adjustments remotely.
In summary, cable speaker selectors are versatile devices used to control audio distribution in multi-speaker setups. They are particularly beneficial in multi-room home audio systems and can also find applications in more complex car audio configurations. When using speaker selectors, it's essential to consider factors such as impedance matching, volume control, and protection features to ensure optimal audio performance and system protection.
Below you can find our editor's choice of the best cable speaker selectors on the market
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS6),Black
Pyle
Product description
PyleHome Model : PSS6
6-Ch. Stereo Speaker Selector
6 Channel High Power Stereo Speaker Selector
- Up to 6 Separate Speaker Pairs to Your Stereo System
- Accepts Speaker Wires up to 14-Gauge
- Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
- Protection Circuitry Keeps It Running Smoothly
- Frequency Response: 20Hz-20KHz
- Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector |
| Answer: | There is no difference in for the install if you mount speakers in the wall or ceiling. |
| Question: | Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver |
| Answer: | I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick). |
| Question: | How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A |
| Answer: | I would recommend a 5.1 home audio receiver. |
| Question: | can i play all 6 speakers at the same time |
| Answer: | The pyle pta44bt would be a good amp for the speakers. |
Product features
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Nobsound MC1024 2-Way Microphone Headset/Speaker MIC Audio Switch Hub Switcher 3.5mm 4-Pole MIC A&B Selector
Product description
Button Function and Wiring:
A/B Selector: used to connect the headset to A (PS4, Xbox, MAC, Nitendo etc.) or B (Computer, Phone etc.)
Volume Control: to control volume of headphones and multimedia speakers but cannot control microphone
Mute Button: Mute both the microphone and headphone (with a set switch) or the microphone alone (can hear others while others can't hear you)
Output Setting Switch: Set the audio output to be a headphone or a speaker
Wiring: Microphone cable of the headset => red jack; The other cable => green jack; A & B => two different devices like a computer or game console; External powered speaker => speaker output port output port (please refer to the image)
Packing List:
1* MC1024 Audio Switcher
2* Headset Cable
1* 3.5 stereo audio cable
Application Scenarios:
1.For game players: Can easily switch between a gaming computer and a game console. And you can also switch between the headset and the speakers freely when you are tired of hearing with a headset. The mute button is also very practical while answering call or communicate with others.
2.For bloggers chatting on-line: most bloggers have more than 2 chat website accounts. This switcher also can be used between two chat software or devices. You can wasily switch between your computer and phone to communicate with different people.
3.For work meetings: If a desktop computer and a laptop are at work at the same time, the MC1023 can easily switch between your desktop and laptop voices.
4.For music studio: This converter can easily switch between two different sources to a recording device to achieve mixing effect. (Note: The headphone jack and microphone interface are stereo so there are 4 channels of audio signals that can be simultaneously switched).
- Difference between MC1023 and MC1024: Some devices have two audio outputs -- one for AUX output and another for MIC output, then you can use MC1023. While some devices' AUX and MIXC outputs are integrated, then you need to use MC1024.
- If you often need to switch your headphones, microphones and multimedia speakers between two devices, and also need volume control and microphone mute, then this is what you need.
- The Little Bear MC1024 is a 2-way audio and microphone A / B converter with full function which allows you to quickly switch between two computers or game consoles without having to plug in/out your headphones, microphones and speakers.
- What's more, with ultra-small size, A / B selector switch, volume control, one-button mute button, mute setting and output setting switch, it can meet most of your needs.
- Direct replacement or refund for defective devices. Prompt and courteous customer service.
User questions & answers
| Question: | Will this connect my speakers and also a headset (with mic) to my PC? I want to be able to switch between speakers for music and talking on my headset |
| Answer: | You can control up to 4 sets of speakers independently or play all at the same time! I have switch A for patio speakers, switch B for inside house, sometimes I play A or B or A+B |
| Question: | Is there any way to fix the mic echo |
| Answer: | In modern amplifiers the protection button is actually used to simulate a safe ohm load to the amplifier, not mask the lack of a load. When you connect multiple speakers of certain ohm ratings in series or parallel, it alters the ohm load presented to the amplifier. The switch allows you to attach multiple speaker sets while presenting and "buffering" a consistent/safe ohm load instead of the actual load. 2 x 8 ohm speakers in parallel on the same channel would show up as 4 ohm (divide ohm rating of speaker by number of speakers), which could cause your amplifier to fail (it needs to work harder) if not designed to drive speakers with that ohm rating. If you are using more than 2 pair of 8 ohm speakers simultaneously you would turn on the protection mode to present an ohm load of ~4 ohm instead. Most protection solutions present a 4.5 ohm load in this scenario. Understand that ohm loads are AC and thus are constantly fluctuating during playback. Speaker ohm levels typically will "change" @ different volume levels etc. Low impedance allows for a more efficient electric signal. Typically speakers are rated 4, 6 or 8 ohms. Lower end receivers can sometime have issues driving low impedance 4 or 2 ohm speakers. |
| Question: | Will this output both mic and channel a to speaker (center)? trying to connect my mic with ps4 party and combine the 2 to output |
| Answer: | Hello Dan,This device is for other areas of a home where you have additional speakers and is not made to be used with the surround sound system. It can be used with "Stereo Receivers" or with 7.1 A/V Receivers where your only using the 5.1 portion of the receiver. What that means is if you have a surround sound system in your home, then all the speaker outputs of the receiver are dedicated to the surround sound and at that point there are no more speaker terminal outputs to be used.However, if your receiver is a 7.1 A/V receiver and your only using it as a 5.1 Surrond Sound System, then you will have 2 additional speaker outputs that aren't being used.At that point you can attach those terminals (via 2 speaker wires a left & a right) to the Pyle 4 Channel Speaker Selector. Now connect the other rooms to the outputs on the Pyle Speaker Selector. ***Make sure you have the correct speakers paired to each individual room when you connect these wires. You can easily determine this by taking a battery from your remote control and placing the ends of the speaker wires to the battery. Positive end of the wire + to the positive end of the battery and the negative end off the same wire to the negative end of the battery, You can hold the negative wire tight to the battery with your thumb while you release and then retouch and release and retouch the positive end a few times. you should hear a popping sound coming out of the speaker. This will let you know which wire goes to which speaker in which room or area. I usually use a "Sharpie" Marker and label the wire "Living Rm" or "Dining Rm" or what ever the room is that the wire goes to. *****Now, and this is most important or you will "FRY" your Pyle unit, make sure the negative wire that is connected to the Pyle output is the same negetive wire that is connected to the speaker terminal in the room where that wire goes and the positive does the same. IF YOU CROSS THE WIRES AND PUT THE NEGATIVE WIRE IN THE POSITIVE TERMINAL, YOU MOST LIKELY WILL GET BAD RECEPTION TO THAT SPEAKER OR FRY (DAMAGE) THE PYLE UNIT AND MAYBE EVEN YOUR RECEIVER. ALSO, MAKE SURE NO BRAIDS OFF OF THE SPEAKER WIRES TOUCH THE CHASSIS OF THE RECEIVER OR EACH OTHER. THIS WILL SHORT THE UNIT.Finally, you may have to go into the setting of your A/V Receiver and select the "Speaker Settings" and scroll to where the "Surround Back" or "Zone 2" Speaker set up is and select "NO". This will deactivate the use of those speakers to be used in the room where the Surround Sound is and will allow them to be used for "Stereo Music" to other rooms.In about 90-100% of all A/V Recievers have to use "Analog" or "RCA Cables" from the device you want to hear the music or sound from in the rooms that the Pyle is hooked up to. FM Tuner (or radio stations), Pandora and Internet Radio Stations are already incorporated in the receiver and will play with no problem.Now just select "Zone 2" on the Receiver and press the "Input" selection you want to hear in those other rooms. Raise the Zone 2 Volume Level for those rooms and you should hear music or audio. Please note that some receivers have a time period of 5-6 seconds for you to do these steps, so when making your audio selection and volume level, know where your audio selection button is that you want before performing these steps or your Receiver timer will time out and you will have to permorm them again. It can be frustrating at first for a novice. It was for me. Sometimes still is. LOLA couple of things to know. I would only use this device if I had "Individual Volume Controllers" in each of the rooms or areas where I want Music or Sound. If you don't, then the "volume level" will be the same in all those areas. Volume Controls allow you to do what they say, they can "Control" the volumes level. If the Music or Sound is too High in one room, it might be too Low in an other room. Volume Controls correct that.If you don't have individual Volume Controls in the rooms where your speakers are, then you want to purchase the Pyle Home PSPVC4 4-Channel High Power Stereo Speaker Selector with volume Control. http://www.amazon.com/Pyle-PSPVC4-4-Channel-Speaker-Selector/dp/B0013CH7UK/ref=sr_1_1?ie=UTF8&qid=1376744129&sr=8-1&keywords=Pyle+Speaker+Selector+with+Volume+Controls If you have any issues getting the sound to pass through Zone 2 of your Receiver, contact the units manufacturer and ask for tech support.I hope this helps.Ken Nichols, PresidentSIGHTS & SOUNDS OF SOUTH FLORIDA, INC.3801 Environ Blvd.Fort Lauderdale, FL 33319305-788-1895 |
| Question: | Could this be used in reverse I/O configuration? I'd prefer the button in the top to switch between headset and speakers |
| Answer: | Really, as long as you are using 8 ohm speakers the volume control shouldn't matter all that much. As long as you are happy with the quality. I got mine from Radio Shack. I've also seen some at Home Depot. I know Amazon carries some also. |
OSD 6 Zones Speaker Selector w/Volume Control 300W Impedance Matching Dual Input On/Off SSVC6
OSD Audio
- SOUND QUALITY: The audio stays at a consistent quality with the SSVC6D to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound.
- IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
- POWER: This speaker selector allows you to distribute an amplified signal for up to six zones throughout the house, letting you choose which source is playing in each designated zone.
- DESIGN: Front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons.
- EASY INSTALLATION: The SSVC6D includes a removable phoenix connectors that accept up to a 14 gauge speaker cable to avoid frustration when connecting multiple speakers.
User questions & answers
| Question: | Can you tell me what the warranty is on this product |
| Answer: | This is just a simple switch - there are no delay elements in it. If you are experiencing echo, reverb, or feedback, the problem must be somewhere else in your setup. |
| Question: | Can I connect this to my receiver via bluetooth |
| Answer: | This won’t do what you’re trying to accomplish. This is a brilliant, yet simple, A/B switch. I use A for my PC audio out and B for my cell audio out to one set of headphones. |
| Question: | what is the maximum continuous amplifier power for which this product is compatible? The SSVC6 says 300W, but I can't find a spec for this one. THXS |
| Answer: | Short answer: Yes. Longer answer: You had me curious as to the answer, so I just hooked mine up the way you describe. I connected one PC going INTO the front headphones-out port, and another PC going INTO the speaker-out in the rear. Then I hooked up my speakers to INPUT B, and my headphones to INPUT A. That turned the A/B switch into an output selector and the front switch into an input selector. Everything worked fine, but for the completeness of the answer, I have to point out that the first time I connected things this way I got a 60Hz hum in my speakers, but disconnecting and reconnecting fixed that problem. I tested the speaker, volume, mic, and mute functionality, and they all worked well. Again, for the completeness of this answer, if I connect my Dell G7 laptop to a Type-C docking station (handling the audio, too), and the docking station connects to the Nobsound, and my headphones (with mic) are plugged into the Nobsound's headphones-out, then the laptop doesn't detect my headphones' mic. But that doesn't really bear on the answer you are looking for ( it's probably just a config I haven't sussed out yet); it's just something to be aware of. |
| Question: | What do I need to look for in a receiver to pair with this volume control selectors |
| Answer: | While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps. |
Product features
Dual sourcec
The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.
Volume Control
Using the same technology as our in-wall volume controls, most units offer volume control per zone.
Impedance Protection
Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.
Easy to Install
Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.
OSD Audio 6-Zone Dual Source Speaker Selector
The SSVC6 speaker selector lets you add up to six speaker pairs around your house with individual volume controls for each speaker pair. Features removable input-output connector blocks for easy, yet secure wiring. Full impedance protection to protect your amplifier from low impedance when multiple speaker pairs are selected.
Xtrempro 61049 2 or 4 Way Speaker Switch, 1 in 2 Out or 1 in 4 Out Way Pair Stereo Speaker Selector W/Screw Type Connections Metal Non-Slip Box - Black (1 x 2 Way)
Product description
XtremPro 2 or 4 way speaker switch, 1 in 2 out or 1 in 4 out way pair stereo speaker selector w/ screw Type connections metal non-slip box - Black Features: the product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction. Amplifier inputs x1 speaker output x2 or x4 load: 150 W per Channel Cable cross-section: max. 2. 5 mm² loudspeaker resistance: 4 - 16 ohms package contents: main unit x1 user manual x1 connection: failure to observe the following instructions can lead to damage to the product, The loudspeakers, and the amplifier. Turn off the amplifier; before connecting the cables. Check all cable connections before turning on the amplifier. Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting. Use Suitable loudspeaker cables only. Connect passive loudspeakers to the loudspeaker outputs only(No active loudspeakers). connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only. Refer to the user manual of the amplifier and the loudspeakers concerning their respective; technical data and any special information concerning their connections.
- 2 or 4 channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices
- Ideal for low cost Distributed audio in residential or commercial sound applications
- Individual control of each speaker pair. Impedance constant at 4-16 ohms, 150w(per Channel), 300W max, Cable length: Max 164ft/50m
- Just hooked up to the stereo. No extra power supply needed
- Metal non-slip box, 5in x 3in x 1. 5in (2 way) and 9in x 3in x 1. 5in (4 way)
- Connector Type: HDMI
User questions & answers
| Question: | Why does it say connector type: hdmi |
| Answer: | I don't think so if I understand your question. This is a passive system (no power supply) with wired input/output. I have bluetooth connected to one of my component amp inputs, and my amp is wired to this distribution system. Hope this helps. |
| Question: | There are no hook up instructions in the packaging or on Amazon. Can you provide instructions on how to hook up to a stereo receiver |
| Answer: | 300 is about right. Any larger and the spkr wires won't fit. 16 gauge max |
| Question: | Can it be mounted on a wall |
| Answer: | We have a 100W amp connected to our speaker selector (actually the 8 channel one) and we can drive both the floorstanding speakers in the main room and all 7 rooms with in-ceiling speakers around the house to any volume we like with excellent fidelity. IF you already have a receiver and you're thinking about a new one to use with the selector, you can always use the old ton and connect it to the second source, and now you have 2 possible kinds of music to switch around the house. WE have the Amp, CD, and IPad on source A, with an old receiver for AM/FM on source B, so we can have one program playing in some rooms, and a second in the other rooms. |
| Question: | Will this work with two amps to switch between one set of speakers |
| Answer: | Hello. Yes, it can. MC1024 (this version) is MIX & AUX integrated version, which means your mic cable and aux cable of your headset is the same cable. If yours are separated, please search MC1023. |
Niles SS-4 Speaker Selector
Niles
Product description
Niles SS-4 speaker selector
- Niles SS-4 speaker selector
- Separate left and right ground paths for compatibility with all amplifiers, including Bridged designs
- Removable Screwless connectors accommodate up to 14-gauge wire. Rugged all metal chassis construction.
- Non-skid feet won't scratch furniture and ensure unit stability during operation 72 adhesive-backed room identification labels requires an amplifier that is compatible with a 4 Ohm load
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | My amplifier is capable of one pair of 4 ohms load. Can I use this to connect 2 pairs of speakers, each pair are 4 ohms load |
| Answer: | No |
| Question: | watts per channel handling.—Does this mean the input can only be 100 watts or that her output can be 100 watts per channel from 400 watt source |
| Answer: | It means that the maximum input can be 100 watts per channel. Now if you have a 400 watt amplifier, it can still work as long as you don't crank it up past 100 watts output. |
| Question: | I have a receiver Denon E400 that has 175W per channel, worked well with these speaker selector |
| Answer: | What matters is the impedance. Most Amps are 8 ohm as are speakers. When you hook multiple speakers in parallel the impedance goes down. The selector ensures that the impedance is at least 4 ohms even when as many as eight speakers are hooked in parallel (and would otherwise present 1 ohm of impedance). On my Yamaha receiver there is a switch that allows for a 4 ohm load and that is the key. You can probably run a 4 ohm load from an 8 ohm driver, it just means that more energy is dissipated in the amp than in the speakers but hopefully not so much as to do damage |
| Question: | Can I control volumes on two different speakers independently with this device |
| Answer: | No, there's no volumes controller on this device. You need a controller like ''Niles VCS100R White FG00956 100 Watt InWall Volume Control " (http://www.amazon.com/Niles-VCS100R-White-FG00956-Control/dp/B0001W1I58/ref=pd_sim_e_3) for each pair of speakers. |
TC-7220 2-Way Amplifier Speaker Selector Switch Switcher Comparator Crossover Router
Product description
The TC-7220 Audio Crossover Network is an audiophile grade 2 way audio switch control center that provides the possibility for you to enjoy the convenience and flexibility of listening to different speakers and amplifiers in your system. Designed to provide distortion free audio from your audio amplifier or Home Theater System to your speakers. This unit features high quality, precision crafted speaker connectors that accept up to 12 gauge wire for maximum reliability and durability. Can handle 200W MAX. 9.5"W X 2"H x 5.5"L small footprint for easy accommodation. 1.2mm galvanized solid metal case.
- Listen to amplifier A or B through one pair of speakers
- Listen to Speakers pair 1 or 2 from one of the 2 amplifiers
- Compatible with all types of amplifiers and loudspeakers
- Input / output through gold plated binding post to accept heavy duty speaker wires or speaker wire pins
- No external power required
User questions & answers
| Question: | can you switch both pairs of speakers on at same time with either amp 1 or amp 2 iow - 1 amp into 2 pairs of speakers |
| Answer: | Take the speakers lines running out of your stereo receiver plug them into the unit . Then you can split the Signal . |
| Question: | What size banana plugs fit into the connectors on the back? They must be minis like 3 or 3 mm. Standard banana plugs seem to be too big |
| Answer: | No holes for wall mounting. You would need to make one for it. |
| Question: | Can it be used to connect a surround sound receiver without an amp. pre-out port-by way of the front speaker terminals- to a second amplifier |
| Answer: | Yes, you have to wire it backwards of course - amps to speaker outputs, speakers to amp input. There are 1.8 ohm resistors in series with the amp output terminals so you will lose some volume. Also, they're only 5w so they won't take much power. I've played movies and CD at normal to loudish levels tho and they barely get warm if at all. I wouldn't turn it up to 11 tho. Finally, you MUST take great care and insure that only one amp is connected at any time. Even an amp that is turned off could be damaged by one that is on, never mind if they were both on. |
| Question: | can this selector be used to select between an amplifier and a surround Receiver |
| Answer: | It says warranty listed on user manual and in table of content it says Limited warranty, page 5 but page 5 is installation tips. I've read the whole thing and cant find any mention of warranty. That said, I've had it several months now and works great. |
Xtrempro 61048 2 to 4 Way Speaker Switch, 1 in 2 Out to 1 in 4 Out Way Pair Stereo Speaker Selector W/Terminal Clamps Metal Non-Slip Box - Black (1 x 2 Way)
Product description
XtremPro 2 to 4 way speaker switch, 1 in 2 out to 1 in 4 out way pair stereo speaker selector w/ terminal clamps metal non-slip box - Black Features: the product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction. amplifier inputs x1 speaker output x2 or x4 load: 150 W per Channel Cable cross-section: max. 2. 5 mm² loudspeaker resistance: 4 - 16 ohms package contents: main unit x1 user manual x1 connection: failure to observe the following instructions can lead to damage to the product, The loudspeakers, and the amplifier. Turn off the amplifier; before connecting the cables. Check all cable connections before turning on the amplifier. Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting. Use Suitable loudspeaker cables only. Connect passive loudspeakers to the loudspeaker outputs only(No active loudspeakers). connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only. Refer to the user manual of the amplifier and the loudspeakers concerning their respective; technical data and any special information concerning their connections.
- 2 or 4 channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices
- Ideal for low cost Distributed audio in residential or commercial sound applications
- Individual control of each speaker pair. Impedance constant at 4-16 ohms, 150w(per Channel), 300W max, Cable length: Max 164ft/50m
- Just hooked up to the stereo. No extra power supply needed
- Metal non-slip box, 5in x 3in x 1. 5in (2 way) and 9in x 3in x 1. 5in (4 way)
- Connector Type: HDMI
User questions & answers
| Question: | If both speakers are on, would the impedance be similar to running two in parallel? A pair of 4 ohm speakers would draw 2 ohms |
| Answer: | When unscrewing the banana plug the inner hole can accommodate up to 4 mm plug . |
| Question: | Can i push 300rms through this |
| Answer: | The short answer is no. You will be taking the high level output from your first amplifier to the low level input of your second amplifier. At the least this will result in distorted sound. At worst you will damage one or both amplifiers. |
| Question: | ga wire is too big . What size banana plugs can I use and would right angle ones work best |
| Answer: | Yes, for left and right. I switch my main pair of speakers between one amp for my turntable and another amp for surround which also uses that same main pair in addition to a center and a sub. In other a pair of speakers can switch between two amps. |
| Question: | What is Max gauge wire |
| Answer: | Must be a mistake. There is no HDMI |
XtremPro 2 Way Speaker Switch, 1 in 2 Out Way Pair Stereo Speaker Selector W/Volume Control Metal Non-Slip Box - Black (61052), 9.0 x 3.25 x 1.5
Product description
XtremPro 2 way speaker switch, 1 in 2 out way&nba; pair stereo speaker selector w/ volume control metal non-slip box - Black (61052)
Features: the product is used to distribute loudspeaker output signals from audio amplifiers to different loudspeakers for selection and control the volume. This product is only approved for connection to loudspeaker outputs of audio amplifiers and inputs of passive loudspeakers. Inputs: 1x stereo output: 2x stereo load: 60 W per Channel loudspeaker resistance: 4 - 8 ohms cable cross-section: max. 6 mm²
package contents: main unit x1 user manual x1
- 2-Channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices
- Ideal for low cost Distributed audio in residential or commercial sound applications
- Individual control of each speaker pair. Impedance constant at 4-8 ohms, 60w(per Channel), 120W max
- Just hooked up to the stereo.No extra power supply needed
- Metal non-slip box, 9.0in x 3.25in x 1.5in
- Connector Type: HDMI
User questions & answers
| Question: | Will this work for a onkyo Home entertainment system |
| Answer: | Yes |
| Question: | There seems no definitive answers here. Can you connect the speaker and amp wires via Banana Plugs |
| Answer: | Don’t use banana plugs. Just twist your 12 ga wire more or just cut a couple strands off until it goes in. |
| Question: | Will "banana plugs" work with the connections |
| Answer: | 12 gauge and its tight |
| Question: | Can the volume to speaker part two be louder than the volume to speaker pair one |
| Answer: | Either amp can access the speakers, however, you must choose which speaker you desire as both speakers cannot be on at the same time. Only one or the other. The same rule applies to the amps as well. |
Amazon Basics 100ft 16-Gauge Audio Stereo Speaker Wire Cable, 100 Feet
Amazon Basics
Product description
An Amazon Brand
- Connects audio speakers to your A/V receiver or amplifier
- The plastic jacket around the speaker wire helps deliver high-quality undistorted signals to and from all of your audio equipment
- One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity for a proper audio system set up
- Comes wrapped around a hard plastic spool, making dispensing convenient and easy
- Product Dimensions: 100 Feet x 16-gauge
User questions & answers
| Question: | Is it 100% copper or is it copper coated aluminium (CCA |
| Answer: | There IS a difference between CCA and OFC in terms of speaker wire. If you are running high wattage over a long (>50ft) run length, the cheaper grade CCA will likely become hotter and not handle it well. This 16ga wire should have the same sonic clarity as a smaller 18ga pure copper wire. You get what you pay for. |
| Question: | Any updates on CL2 or CL3 rated? There is no straight forward answer on it yet |
| Answer: | There is NO fire risk when using this wire for low voltage applications i.e., speaker connections. Most jurisdictions don't care about CL2/CL3 unless you are running 110VAC. This is speaker wire. Don't sweat it! |
| Question: | what is the difference in watts when it comes to speakers wires |
| Answer: | The answers here are variably correct and incorrect!! The resistance of the speakers (ohms) needs to match the impedance the amplifier circuit is rated to handle. Too small a wire (length is a variable) will induce a resistance that the amplifier will face, like a speaker, and this will alter the "balance" of the intended match!!!! Pushing speakers rated at 500 watts under a constant load of 250 watts will induce heat "resistance" if the line between the amp and the speaker is very small and sound quality will be compromised!!!! Up to 100 feet of lead at a constant load of 500 watts would ideally be handled using 10 gauge copper, braided wire facing from 4 ohms to 16 ohms. Bottom line: Discriminating "audiophiles" popularly tout the use of 12 gauge braided lead for almost all in-home installations ... this allows for component upgrades in the future! As said here, 16 gauge braided lead, in most installations, will produce results that are completely acceptable in matching power and impedance and results!!! |
| Question: | Is it oxygen-free copper (OFC) wire |
| Answer: | No need for OFC; The high-end speaker wire industry markets oxygen-free copper as having enhanced conductivity or other electrical properties that are supposedly advantageous to audio signal transmission. However, conductivity specifications for common C11000 Electrolytic-Tough-Pitch (ETP) and higher-cost C10200 Oxygen-Free (OF) coppers are identical. Much more expensive C10100, a highly refined copper with silver impurities removed and oxygen reduced to 0.0005%, has only a one percent higher conductivity—insignificant in audio applications. OFC is nevertheless sold for both audio and video signals in audio playback systems and home cinema. |
Product features
16 Gauge Speaker Wire
This 16 gauge speaker wire with spool from Amazon Basics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The Amazon Basics speaker wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
No Distortion
The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
4 Channel Speaker Selector Switch - Multi Zone A B Speaker Distribution Controller Box w/ Independent Audio Source Volume Control, Supports Home Theater Stereo Amplifier Receiver System - Pyle PSLSW4
Pyle
Product description
Pyle Model : PSLSW4
4-Ch. Speaker Selector System
Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System
Features:Technical Specs:
- 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
- CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
- INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
- EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
- OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability
User questions & answers
| Question: | Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you |
| Answer: | Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps. |
| Question: | I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together |
| Answer: | Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps. |
| Question: | Can the speaker connectors take banana plugs as opposed to threading the wires |
| Answer: | I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly. |
| Question: | So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to |
| Answer: | Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though. |
Product features
4-Ch. Speaker Selector System
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.
CONTROL 4 SPEAKERS
The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
INDEPENDENT AUDIO CONTROL
Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.
EASY SETUP
Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
Protection
Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.
Watt
The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
Dimensions
The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.
Niles SSVC-6 Speaker Selector, Color
Niles
Product description
The Niles name is synonymous with premier whole home audio solutions. For nearly four decades, Niles has delivered innovative products that enable simple and easy access to home entertainment, and we are now creating audio solutions that seamlessly integrate with lighting and climate control.
- Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- Removable screwless connectors accommodate up to 12-gauge wire
- Accommodates 6 pairs of speakers
- Power handling - 100 watts per channel RMS; 200 watts peak
User questions & answers
| Question: | Can this selectror control volume |
| Answer: | Hi, Each speaker will have its own volume control independently. Will ship right away. Please order. Thanks. |
| Question: | Is this speaker switch temperature sensitive i.e. can I set one up in my attic and would possible temperature fluctuations affect its functionality |
| Answer: | The unit isn't much more than switches and potentiometers, so I don't think it would be sensitive to ambient temperature unless the temperatures encountered were EXTREME. As the other reviewer noted, your primary concern with an attic set-up would be accessibility. The whole point of the selector is to control a distributed audio system, so if you couldn't get to it easily it would be a waste of effort. I am very pleased with my selector. It works as advertised in my system and has never given me any trouble. |
| Question: | I have receiver ( sony strdh750 7.2 channel 4k av receiver) by what channel should i go to this speaker selector, i have center, front a, etc |
| Answer: | Hi,Unless you have speaker A and B selection on your Sony. Otherwise i wouldn't suggest you taking the main channel to speaker switcher. Thx. |
| Question: | Could this be used for 3 different speaker zones inside and 3 more outside with volume control for each zone? Using a Sonos amp |
| Answer: | I have to disagree with this answer. I have two of these units and they do control 6 pairs of speakers, this equals 12 total, not 6. Again the Niles SSVC 6 will control 12 speakers in pairs of two for right and left channel. It does have volume control as well as on/off control for each of the 6 pairs. This unit includes labels for each zone. It does send equal signal to each speaker set to balance out the ohm load on your amp or receiver to prevent over load. |
Latest Reviews
View all
Kensington Keyboard Mouses
- Updated: 25.03.2023
- Read reviews
Unknown Mattress Pads
- Updated: 23.03.2023
- Read reviews
Delta Children Portable Cribs
- Updated: 26.03.2023
- Read reviews
Io Crest Usb Hub
- Updated: 18.03.2023
- Read reviews
Probiotic Pill For Yeast Infection
- Updated: 20.04.2023
- Read reviews