11 best io crest usb hub

Product description

The IOCrest SY-HUB20134 3.5 inch 4 port USB 3.0 bay hub can installed in a 3.5" front panel bay or a 5.25" bay with provide bracket. Our 4 port USB 3.0 hub offers 4 extension ports for USB 3.0 and is backwards compatible with both USB 1.1 and 2.0 Specifications. Once a USB 3.0 device is attached to PC via this hub, a user may enjoy up to 5Gbps of transfer speed.

• Mounting options: 3.5-Inch Floppy Drive bay or 5.25-Inch Drive bay (using the bracket)
• Compliant with universal Serial bus 3.0 Specification Revision 1.0
• Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices
• Up to 5Gbps data transfer rate
• Hot-swapping feature allows you to connect/Disconnect devices without powering down the system
• 4 USB 3.0 Type-A Female Ports with the 4th Port having Fast charging support
• Mounting Options: 3.5-Inch Floppy Drive Bay or 5.25-Inch Drive Bay (Using the bracket)

User questions & answers

Question:	Does this use two 19-pin MoBo connectors, or only one
Answer:	This would have a 3.2GHz processor.
Question:	Is it backwards compatible to USB 2 and USB
Answer:	I don't have paperwork anymore, but my husband (about 225 lbs) loves it because it is wider than a typical foam pad, stores easily, and is very comfortable. Glad we got it.
Question:	How does this device connect internally
Answer:	I would not suggest this for a long term every night use. It does flatten after a while. On mine, the zipper cover broke, and it may be contributing to the fact that the seems are very noticeable when flattened out and you happen to lay on one the wrong way. I was not pleased with this purchase but never received a response from the seller to my inquiries.
Question:	It's optional mounting either 3.5 or 5.25 inch
Answer:	We bought two in June and the odor was very strong. We din't have the heart to throw them in the dumpster so took a chance, took out the foam pieces from the cover and washed them in our bath tub with a soap solution. I know!! Sounds Crazy. Right? After rinsing thoroughly it took more than two weeks fro them to dry in the sun. I am not kidding. It was hot in the mid-west in June and yet it took full two weeks for the foam to dry completely. The odor is completely gone now after all the hard work but we can vouch for the quality. It's superb.

Product description

Save space and quickly charge all of your electronic devices with this USB power bar. This device allows you to connect and monitor power output for up to 6 devices. With a durable and lightweight Housing this makes a great addition to any home or office workspace. Also Works well as a travel companion to keep those necessary electronics powered.

• Power output up to 6.5Amp over 6 ports
• Over current protection
• Supports Sleep mode after extended duration
• Reusable bottom stand adhesive

User questions & answers

Question:	Is this device only a charging station or will it also serve as a usb 3.x hub
Answer:	No it doesn’t have either

Product description

This USB 3.0 hub is designed to deliver convenient access to high-speed connections and save your time. Additionally, the 7th port, Compliant with battery charging) 1.2 Specifications, delivers a quick charge to your USB-enabled device when your computer is in sleep mode or powered off. Sync files and interact with your PC or Mac more efficiently. Has complete backwards compatibility with all generations of USB which ensures that all of your existing devices work seamlessly!.

• USB 3.0 compliant with universal Serial bus 3.0 Specification, Revision 1.0
• Super Fast 5Gbps data transfer rate
• Hot-swapping connect/Disconnect devices
• Extra power feed with 1 Amp power adapter bundled
• Fast charging for USB Chargeable devices
• Compliant with Universal Serial Bus 3.0 Specification, Revision 1.0
• Data Transfer Rate: Up to 5Gbps

User questions & answers

Question:	What amp output does this support? 2 amps? 3? It says 3 amps, but I noticed it was talking about the power adapter, so I'm not sure
Answer:	You would just need a USB wifi adapter to connect to wireless network.
Question:	Why do some answers say no power adapter when the listing says: charging with 12v/3a ac power adapter
Answer:	HP

Product description

Upgrade or fix your computer's sound in under a minute with this IOCrest USB Stereo sound adapter. No driver required, just plug it into any USB 3/2/1 port and your operating system will do the rest. The IOCrest SY-AUD20205 sleek aluminum shape makes it a great addition for high-end laptops and Ultra books. Perfect for connecting to USB hubs.

• Connect a headset or computer speakers to stream music in Stereo; connect a mono condenser Microphone for Skype chat, voice recognition, amateur radio, or DJ controller applications
• Quick fix for a failed Audio port in a laptop. Work with USB hub or USB Extension cable; compatible with Chrome, Linux, Mac and Windows OS
• C-Media HS-100B chipset. Supports Windows 7, 8, 10, Mac OSX and Linux
• Compatible with USB 3.1, USB 2.0, and USB 1.0 Ports
• 3.5mm mic and speaker jacks. Sleek silver design. Plug-and-play, No driver required

User questions & answers

Question:	Does this work for windows
Answer:	Yes it has a 90 degree elbow, it included everything needed to hook it up!
Question:	Is the mic input stereo or mono
Answer:	I should add a note to my response to no stops on CPL filters: don't confuse that with CPL filters that are 3 or 6 stop (ex. Breakthrough CPL). They are a combination of neutral density filters 3 stop and 6 stop with the CPL and have nothing to do with rotation "stops".
Question:	Does it work on Linux? (Ubuntu 10.4 here) Thanks
Answer:	Since the filter thread on the Miakon Zhongyi Speedmaster 50mm f/0.95 iii lens for Nikon Z has 67mm filter threads, you would need a 67 mm Hoya HD3, not the 49mm you mention.
Question:	are any drivers needed
Answer:	Not lens flare so much. Try lens shade. Also try polarizing filter for sunlight.

Product description

Designed to work with higher-bandwidth peripherals including external USB 3.0 external disk drives, high-resolution webcams, video surveillance camera, digital video cameras, and multi-channel audio. It supports data transfer speed up to 5Gb/s, while backward support legacy USB devices (USB 2.0 and USB 1.1)

• Provides Two USB 3.0 and Five USB 2.0 Ports
• Connects up to 7 USB Devices
• Supports Simultaneous Operation of Multiple USB 3.0, USB 2.0 and USB 1.1 Devices

User questions & answers

Question:	are they both 3.0 and 2.0 mixed
Answer:	I believe both 3.0 and 2.0 signals can both be utilized with this Hub.
Question:	I have couple of 2.0 devices that just won't connect to 3.0 ports if I get this do you think I'll be able to connect them
Answer:	might.However, you better to find out why your USB 2.0 won't connect. Unless the connector is different, USB 2.0 mouse, keyboard should be able to work with USB 3.0 port
Question:	Laptop has 3.0 port. Want to connect 2.0 devices. Does this product accomplish that
Answer:	Dear Customer, You can connect 2.0 devices to a 3.0 port. That is honestly one of the big features of USB, is that a USB 3.0 device should work in a 2.0 or even 1.1 slot, and a USB 1.1 or 2.0 will work in a 3.0 slot. However, this does multiply a single USB 3.0 port into 7 total ports.

Product description

The USB to serial converter allows you to add eight RS232 serial ports to a computer with a available USB port. This industrial grade device can be used on applications such as: POS printer terminals, networking system, PLC instrumentation device, and data acquisition I/O control module.

• Standards: conforming to USB V1.0, 1.1 and 2.0 and EIA RS-232
• USB signals: vcc, data+, data-, GND
• RS-232 signals: DCD, RXD, TxD, DTR, gdn, DSR, rtrs, CTS, RI
• Supports Serial transmission rate up to 230400bps
• UART interface supports 7/8 Bit data, 1/2 sto bits, and ODD/even/mark/space/No Parity

Product description

Supports DVI-D monitor up to 1920 x 1080 screen resolution. Supports Speaker and Microphone devices. Compact size design

• Self Powered Through USB Connection
• LED Indicators for PC and Audio Status
• Emulates a keyboard on each PC to allow computers to boot normally without a keyboard error
• Supports Speaker and Microphone
• Emulates a keyboard on each PC to allow computers to boot normally without a keyboard error, This device is compatible with Windows 7, 8, and 10. It should also work with Mac OSX and Linux-based computers.
• Supports Hot-Swap. All Devices Connected to the KVM can be Added or Removed at Any Time Without Power Off
• Supports both USB Keyboard Hot-key PC Switch (for Microsoft Windows Series) and Push Buttons PC Switch for Easy Operation. PC Selection: [Scroll Lock] + [Scroll Lock]. Audio Selection: [Num Lock] + [Num Lock]

User questions & answers

Question:	To be HDMI 1.3, this device must support 2560x1600. What version of HDMI does it actually support
Answer:	no. Only connect to computer USB port.
Question:	are cables includer in box
Answer:	Can not automatically rotate, need in Windows seytem expand mode to achieve
Question:	I dont see the switch button in the photos. Is it on the device? Or is it on a cable
Answer:	It will fit everything mentioned. I think for the most part it will keep everything safe from being broken. But I wouldn't throw it down the stairs and test it.
Question:	I saw there are only two USB cables out to each computer. Does this mean I can control each computer with one USB cable
Answer:	It should

Product description

Instantly upgrade to USB Super speed+ with this IOCrest 2 port Type-A USB 3.1 10Gbps card. Now with USB 3.1 Gen 2, experience data throughput of up to 10Gbps. Charge 5V devices at up to 900mA when connected to a SATA power connector. Completely backwards compatible with USB 2.0 and USB 1.0 devices

• AS media ASM1142 chipset external 2 Ports USB 3.1 (2 x USB Type-A port). support all USB 3.1, USB 3.0, USB 2.0, and USB 1.1 devices
• USB 3.1 Super speed+ support maximum transfer rate at 10.0 Gaps per port, backward compatible Super 5.0Gbps, high-speed 480Mbps, full speed 12Mbps, and Low speed 1.5Mbps
• PCI Express 2.0 / 3.0 x4 Lane Gen2 interface, compliant with Intel extensible host controller interface (xHCI) Specification 1.1
• Compliant with PCI Express Specification 1.0, 2.0 and 3.0, compliant with Low profile PCIe form Factor, ready for all size of PC cases
• 5V/900mA charging when connected to SATA power connector(15 pin). this card is designed for PCI-E x4 Slot. Will not work with x2 Slot

User questions & answers

Question:	how tall is the alignment plate? the picture makes it look small and i have a big (normal) case. Obsidian 550D
Answer:	I'm pretty sure there would be enough wire for that.
Question:	drivers
Answer:	The volume knob should lower the output to zero. If yours doesn't it may be wired incorrectly or the knob may be defective.
Question:	Is this a bootable device from bios like a adaptec scsi controller
Answer:	I wouldn't call them warm or jazzy specifically. Kind of chimey. I purchased this one and a Kaish pre wired one, both from Amazon. The Kaish one sounded much nicer imo, and arrived way sooner. This one just sounded "cheaper". Also, I was intending on using the tuners on a Squier and they were too big for the holes in my head stock.
Question:	Will this card work in pcie gen 1.0a x4 under windows xp pro? It has 4 lanes so gen1 should be ok to drive usb 3.0 if the card works
Answer:	ceramic

Product description

The SI-PEX40057 4 port SATA III PCI-E 2.0 X2 Hyper Duo RAID controller card marvel 88SE9230 chipset adds four SATA III ports to a computer through a PCI-E 2.0 X2 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. Featuring Hyper Duo technology, the SATA card offers SSD auto-tiring which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), Hyper Duo discreetly works in the background to identify and move frequently accessed files to the faster SSD drivers) for improved data throughput. The Hyper Duo automatic storage tiring feature is compatible with Windows XP, Vista, 7, and 8 only.

• We recommend a fresh Windows install with this card
• Drivers are required for this card to function.
• Chipset: Marvell 88SE9230
• Installed with a full profile bracket, Low profile included with the package
• Port Multiplier FIS-based and Command-based switching supported
• Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps
• Supports RAID 0 and 1 modes, Requires at least a PCIe x4 slot to function

User questions & answers

Question:	Will this card work with drives bigger than 3TB
Answer:	No it is not reverse wound, that would simply make it out of phase. What I think you mean is if the middle pickup is reverse wound-reverse polarized which keep them in phase while creating a noise cancelling effect in the 2 and 4 position on a 5-way switch. The answer is no. These are Fender's "vintage" line of pickups which mean they are built like the originals. If you want a truly vintage sound, these are for you.
Question:	Is it bootable through the BIOS? If I plug in a hard drive to be my primary could I install Windows
Answer:	These are the real deal. Windings were dead on when I checked with my meter. Been in my guitar for about 3 years. I play through a 71 Twin that has been Black-faced with JBL's, you can dial up as much spank as you want with these pickups.
Question:	Does the computer load a special windows driver during boot? I am running Win 7 64 bit. I want to add SATA 3 ports but without having the card have to
Answer:	Usually it's done with a push pull tone knob or a 4 or 5 way switch. search for a wiring diagram to see how it's done.
Question:	so if I put this into a x16 PCIE 1.0 port and hooked an SSD to it, what would be my max bandwidth to the SSD
Answer:	The pots are 250k. They are long shaft.

Product features

Add Four Internal RAID SATA III Ports To A Computer Through A PCI-e x1 Slot

The SI-PEX40057 4 port SATA III PCI-e 2.0 x1 controller card Marvell 88SE9230 chipset adds four SATA III ports to a computer through a PCI-e 2.0 x1 slot. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gbps, the controller card features a native PCI Express single chipset that provides performance for SATA 600 MB/s storage needs.

Speeds of 6.0 Gbps, 3.0 Gbps

This adaptable add-in card gives SATA III connectivity 6Gbps, while remaining backward compatible with PCIe 1.x. Its support the communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps.

Chipset: Marvell 88SE9230

The Marvell 88SE9230 can be used for embedded platform applications such as home NAS/media servers, DVR/NVR and set-top boxes, or by HBA vendors to develop their own RAID software or in-box OS drivers.

• Supports Native Command Queue (NCQ)
• Supports Port Multiplier FIS Based Switching or Command Based Switching
• SATA ports are bootable

Product description

With a refined matte metallic aluminum body, the Rybozen 7-Port USB hub 3.0 powered will complement the aesthetic of your laptop and conserve desk space at home or the office.

1. Aluminum Hubs: 7 USB3.0 Ports, Easy connect peripherals like mice, keyboards, flash drives, card readers, or an external hard drive to your PC laptop or Mac.

2. SuperSpeed Data Transfer: USB 3.0 ports transfer photos, videos, and music at up to 5Gbps, backwards compatible with USB2.0 and 1.0.

3. Plug And Play: AC power adapter ensures safe & steady data transfer for all connected devices.

4. Compatibility: Silver brushed aluminum body. Support Windows , Linux , Mac OS. Compatible with laptops, PC desktops, and Apple PC.

5. Package Contents: Rybozen 7-Port USB 3.0 Hub with 1.7Ft USB cable , 5V / 4A Power Adapter.



Specifications:

Output: 5V / 4A Max.

Dimensions: 130 x 70 x 30mm.

Weight: 150g.



Note:

For best performance, the power demand of connected devices should not exceed the total current output of 4000mA. Direct connection to the host is recommended for high powered device such as Apple Superdrive.

• Aluminum Hubs: 7 USB3.0 Ports, Easy connect peripherals like mice, keyboards, flash drives, card readers, or an external hard drive to your PC laptop or Mac.
• Super Speed Data Transfer: USB 3.0 ports transfer photos, videos, and music at up to 5Gbps, backwards compatible with USB2.0 and 1.0.
• Plug And Play: Hot-swapping. Upgrade 20W (5V 4A) AC power adapter ensures safe & steady data transfer for all connected devices.
• Compatibility: Silver brushed aluminum body. Support Windows , Linux , Mac OS. Compatible with laptops, PC desktops, and Apple PC.
• Package Contents: Rybozen 7-Port USB 3.0 Hub with 4.9Ft USB cable ( Upgrade ), 5V / 4A Power Adapter , 60-Days Money Back Guarantee and 18-Months warranty.

User questions & answers

Question:	Does this have to be plugged into the wall or can i power it off my PC
Answer:	You should plug this into the wall for it to work. There are too many USB ports on it to be powered from a PC's USB port. It won't work at all without using the supplied power pack.
Question:	is this device universal? does it work with 220v
Answer:	100-240AC.
Question:	can you use this for the external hard drive on xbox n ps
Answer:	Yes, this hub works with xbox and ps4. Thanks.

Product features

Fast Transferring

Our USB3.0 Hub over 10×faster than USB 2.0

Sync data at 5Gbps-transfer 4K video in seconds.

Hub with AC power adapter

USB Hub with 5V / 4A (20W) AC power adapter that it can ensure safe & steady data transfer.

Plug-and-Play

Rybozen USB Hub support Plug-and Play, Hot-swapping supported.

Package :

USB 3.0 7-port hub.

5V / 4A power adapter.

Product description

Name: USB 3.1 optical drive panel with KEY-A line

Wire: 24+28 AWG OD: 5.5MM

Line length: 0.8M

Interface: 2xUSB 3.0 port, 2xUSB 2.0 port, 1x Type-C port, 1x HD audio output port,

1x microphone input port.

Plug: copper plated nickel plated terminal gold plated 3μ

Size: 99x148x42mm

Net weight: 350g

Packing size: 120x160x48mm

Shipping weight: 400g

Bracket: 0.6mm thick galvanized sheet

Quality inspection: 2 electrical tests, full appearance inspection

After sales: one-year warranty + return

• 【The package includes】: The panel size is 5.25 inches, which is used for the optical drive to expand the chassis. A total of 7 ports, 2xUSB 3.0 port, 2xUSB 2.0 port, 1x Type-C port, 1x HD audio output port, 1x microphone input port.
• 【Advantages】: The panel is a 3.1-generation panel with a Type-C interface. It has a Key-A cable to connect to the host. The transmission speed is faster than the chip version, and the speed can reach 10Gbps.
• 【Operating system compatibility】: Windows XP / Vista / Server / 7/8/10, Linux.
• 【Simple and convenient】: no need to download any driver, no external power supply, positive and negative plug-in, two-way data transmission, safe and efficient.
• 【Durable】: Reasonable design interface, lightweight galvanized steel plate for anti-oxidation corrosion and longer service life. It has 2 electrical tests before leaving the factory and is guaranteed for one year.

User questions & answers

Question:	How long are the cables to connect the usb 2/3/3.1? (i don't need audio) and i'm using corsair 750d full tower huge case, requires long cables
Answer:	The way to tell is the generation three does not have a hole on the left side for a paperclip to hit the reset button. The gen. 3 has no reset. This is the model number for the new model. Much more robust wifi. If it's not the new one, dont use it. Return it.
Question:	Will it fit a cool maste4 haf 912 case
Answer:	Yes but you still have to align it with 3 stars and the phone will do the rest after that.
Question:	Is this item compatible to p7-1414 hp
Answer:	These pickups are all wound the same, soany of them can be placed in any position without issue. As for the pots they should be installed with 250K pots which are standard on USA and Mexican Strats. Many Squires as well as many Strat lookalikes use 500K pots, which you'll want to change to 250K
Question:	Is the cable provided for the usb-c port a 3.1 generation 1 cable OR a 3.1 generation 2 cable
Answer:	I did the same thing, didnt really have any issue, it was a little bit of tight fit in the pickguard though. It still fit though without filling.