6 best boss audio 5 channel amplifiers

Product description

Ride the waves with the Boss Audio MR1950 Class A/B 5-Channel Full Range Weatherproof Marine Amplifier. This powerful 2-Ohm stable amplifier features 1950 Watts Max Power with a MOSFET power supply to get your boat rocking. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Turn up the Bass and feel the vibes with the Remote Subwoofer Control. Bridge channels for more power and flexibility. The MR1950 Amplifier features a unique rubber door, which tightly seals all control panel openings and weatherproof connectors to prevent corrosion and provide protection against the elements. Surf your playlists with the Boss Audio MR1950. For further product details, please scroll down.

• 300 W MAX Power @ 2 Ohm x 4 Channels
• 150 W MAX Power @ 4 Ohm x 4 Channels
• 600 W MAX Bridged Power @ 4 Ohm x 1 Channels
• 5th Channel: 750 W Max Power @ 2 Ohm x 1 Channel - 375 W Max Power @ 4 Ohm x 1 Channel
• RCA Low Level Inputs, Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost, Remote Subwoofer Control, Variable Input Gain Control, Input Sensitivity Selector
• THD @ RMS Output: 0.01, Channel Separation: 90 dB, Signal To Noise Ratio: 103 dB, Frequency Response: 10 Hz – 46 kHz
• Dimensions: Depth 18.9” x Width 7.3” x Height 2.1”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Can I connect 8 speakers to this amp
Answer:	I only installed 4 speakers and 1 sub and used the built in amp on my receiver for the remainder speakers

Product features

Sonic Waves

Crank it up with the Boss Audio MR1950 Class A/B 5-Channel Full Range Weatherproof Marine Amplifier. With 1950 Watts Max Power and MOSFET power supply, this amplifier is ideal for your entire audio system. It can power 4 or more speakers plus your subwoofer(s). Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The MR1950 Amplifier features a unique rubber door, which tightly seals all control panel openings and weatherproof connectors to prevent corrosion and provide protection against the elements.

Fully Marinized

High-tech, state-of-the-art waterproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections ensure these marine and outdoor products are corrosion resistant and protected against harsh elements.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

Pump out the jams on your next adventure with the Boss Audio MC900B Class A/B 4-Channel Full Range All-Terrain Amplifier. This 4-Ohm stable Amplifier features 500 Watts Max Power to keep your tunes rolling. Hook your smartphone or MP3 Player up through the Auxiliary Input to listen to your playlists. Plug into the USB Port to charge your USB-Connected devices. Bluetooth Audio Streaming lets you play your favorite music apps like Pandora or Spotify. No need for an In-Dash Head Unit to play your music. Control it all with the Inline Multi-Function Remote Control. The MC900B Amplifier features weatherproof connectors to prevent corrosion and provide protection against the elements. Feel the music with the Boss Audio MC900B. For further product details, please scroll down.

• Power: 500 Watts Max x 4 @4-Ohms, 94 Watts RMS x 4 @4-Ohms
• Bluetooth: You do not need a head unit. Just power up the MC900B and hook up some speakers to it. The included Bluetooth remote control lets you stream your music via your Bluetooth device and use apps like Spotify and Pandora
• Weatherproof: The MC900B has been designed to handle some light weather conditions without giving up on you. It is great for use in ATVs and boats.
• Class A\B: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Auxiliary in: The Bluetooth remote is compatible with the audio output from smartphones as well as MP3 players. Just plug in and start playing
• USB Charging: You can charge your USB devices using the USB charging port

User questions & answers

Question:	Issue with unit sound us coming out but it is very faint sometimes. have to delete the bluetooth connection and reinstall to work again. help please
Answer:	It is not antibacterial but it is hypoallergenic.
Question:	What are the dimensions of the remote
Answer:	I buys these regularly and they are 1 liter.
Question:	Does this amp have a 12v out that can power lighted speakers
Answer:	I bought them to refill the smaller individual pumps so I don't know about the DEB dispensers
Question:	Is there any way to adjust the settings on the amp? It doesn't seem like I'm getting full power out of mine
Answer:	These are meant for commercial dispensers but I bought them to refill the smaller pumps . Pop the blue cap,off & then the ring that held it . You do need to have the small pumps for the liquid to dispense properly as the foam .

Product features

All-Terrain Amplifier

Rev up your music on land or sea with the Boss Audio MC900B Class A/B Full Range All-Terrain Amplifier. With 500 Watts Max Power this 4-Channel Amplifier is ideal for your entire audio system. It can power up your speakers, subwoofers or a combination of both. Bluetooth technology lets you stream music apps. No need for an In-Dash Head Unit to play your music. You can control it all with the Inline Multi-Function Remote. Plug into the USB Port to charge your USB-Connected devices.

Fully Marinized

High-tech, state-of-the-art waterproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections ensure these marine and outdoor products are corrosion resistant and protected against harsh elements.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

4 Ohm Stable

4-Ohm stable meets the power-load requirements of full-range automotive speakers and most subwoofers, which predominately feature 4 ohm impedance.

Audio Streaming

Wirelessly stream audio via Bluetooth from compatible devices so you can listen to streaming music services such as Spotify and Pandora through your system.

Pre-Amp Outputs and Low Level Inputs

This unit's Pre-Amp outputs let you expand your system by adding one amp or signal processor.

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Aux Input

The Aux Input allows you to connect to the audio output of an external device such as an MP3 Player or smartphone so you can enjoy your music through your system.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

USB Charging

Charge USB connected devices through the built-in 1A charger.

Product description

Kick your Bass into high gear with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR3000D for a total power of 6,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR3000D. For further product details, please scroll down.

• Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms, 6000 Watts Max Bridged x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Specs - Dimensions: 12.31” x 6.50” x 2.80”, Weight: 6.86
• Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Will these amp power these subs? https://www.amazon.com/dp/b014oykx2w/ref=olp_product_details?_encoding=utf8&me
Answer:	Yes and yes
Question:	Will this amp push 4 Elux 15 vm audio
Answer:	each 12" 4 ohm sub would only get 75 watts of power, not a good turnstile for your system
Question:	how can i hook up a 0 gauge wire to this
Answer:	Thank you for your question. The crossover setting cannot be turned off and only goes up to 250 hz. Happy to help!
Question:	Quiero saber si este amp me funciona bien para un parlante kicker l7 de 15 pulgadas
Answer:	Thank you for your question. 150 RMS @ 4 ohms, 300 RMS @ 2 ohms. Happy to help! - Creative Audio

Product features

Performance Power

Ramp up your vehicle's Bass with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. With 3000 Watts Max Power and MOSFET power supply, this Amplifier packs an audio punch. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Remote Subwoofer Control. Strap this Amplifier to another AR3000D for double the performance. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Product description

Drive your in-vehicle audio experience up a level with the Boss Audio Riot R3002 Class A/B 2-Channel Full Range Amplifier. This 2-Ohm stable amplifier features 600 Watts Max Power with a MOSFET power supply to pump out your playlists. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Control those Bass vibes with the Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Get your vehicle rocking with the Boss Audio R3002. For further product details, please scroll down.

• 300 W MAX Power @ 2 Ohm x 2 Channels
• 150 W MAX Power @ 4 Ohm x 2 Channels
• 600 W MAX Bridged Power @ 4 Ohm x 1 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control
• Dimensions: Depth 9.2” x Width 10.4” x Height 2.3”
• 6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It takes anywhere from 10 to 15 seconds depending on the object and temperature you are measuring.
Question:	Can you support two 10" subs with this one amp
Answer:	It can be used under the broiler or in any cooking mode, but it must be inserted into the center of the cut of meat you are preparing.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	No hotter than you can stand to be around. It's plastic... to much heat and it melts!
Question:	whats rhe size of the amplifier
Answer:	Maybe two feet or more. Probe is in the oven and thermometer sits on counter.

Product features

Plenty of Power

Boost your in-vehicle audio experience with the Boss Audio Riot R3002 Class A/B 2-Channel Full Range Amplifier. With 600 Watts Max Power and MOSFET power supply, you get clean, high quality sound. This 2-Channel Amplifier can power a pair of speakers or two subwoofers @4-Ohms or two pairs of speakers or four subwoofers @2-Ohms. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Feel more Bass with the Boss Audio Riot R3400D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3400 Watts Max Power with a MOSFET power supply to get the most out of your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Bump up the Bass and feel the beat with the Remote Subwoofer Control. For double the performance and power, strap on another R3400D for a total power of 6,800 Watts @2-Ohms. Amplifers in the Riot Series are perfect for first time car audio buyers looking to add Bass and enhanced sound and performance to their system at an affordable price. Take your sound experience to the next level with the Boss Audio R3400D.



For further product details, please scroll down.

• Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

User questions & answers

Question:	What realy is the rms power rating for this amp
Answer:	Hello, the RMS for the R3400D is 2,404.
Question:	Are the three fuses 50s
Answer:	There are three 40 amp fuses for a total of 120 amperes.
Question:	does it have a cooling fan
Answer:	No
Question:	Will this amplifier push 2 12in orions xtr 2400 watt Max
Answer:	with ease

Product features

Class D and MOSFET

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability and 1 Ohm Stable

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs and Variable Input Control

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Phase Control and Switchable Input Sensitivity

Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Illuminated BOSS Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

Pump out the jams on your next adventure with the Boss Audio ASK902B.6 4-Channel Weatherproof All-Terrain Speaker and Amplifier package. This combo kit includes the MC900B Amplifier and One Pair of MR6W 6.5" Full Range Marine Speakers with Poly Carbon Cone and Rubber Surround. The 4-Ohm stable Amplifier features 500 Watts Max Power with a MOSFET power supply to rock out on land or water. Plug into the MUSB35 USB to Aux Adapter to charge and play your USB compatible Smartphone or other USB device. Bluetooth Audio Streaming lets you play your favorite music apps like Pandora or Spotify through the speakers. No need for an In-Dash Head Unit to play your music. Control it all with the Inline Multi-Function Remote Control. The ASK902B.6 Amplifier features weatherproof connectors to prevent corrosion and provide protection against the elements. Get out and go with the Boss Audio ASK902B.6. For further product details, please scroll down.

• MC900B Amplifier - Bluetooth Multifunction Controller (Stream and Control your Favorite Music APPs), Weather Resistant, USB Charging, AUX-In
• MR6W Speakers - 1 Pair, 6.5 Inch, Full Range, Weather Proof, Poly Carbon Cone, Rubber Surround, 180 Watts (per pair)
• MUSB35 - Universal USB / 3.5mm Auxiliary Interface Mount, Use with any Radio to Extend USB and Aux Inputs, Dustproof, Water Resistant, 10 Foot Extension Cable
• WP10 - Waterproof Phone Pouch
• NO Head Unit Is Needed To Play your Music, Compatible With Audio Output Of iPod / iPhone / Smartphones and MP3 Players
• MC900B Dimensions: Depth 7.5” x Width 5.2” x Height 1.7”
• MR6W Speaker Dimensions: Depth 7.5” x Width 7.5” x Height 3.4”
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Is the remote wireless
Answer:	The package directions says that two can be paired.
Question:	What is the diffrance from the boss ask902b.6 and the ask902b
Answer:	I have the speaker now I just need the pole and what ever I need for that (brackets)
Question:	How do i hook up a sub
Answer:	These are 10.5EE
Question:	What are the dimensions of the amp and the remote(with mount
Answer:	Felt like a D width to me. I have slightly wide toes and had to go up a half size bigger for some added space