12 best audio tweeters

Product description

Model: PRO-TW120





Type: Super Bullet Tweeter

RMS Power: 200 Watts

MAX Power: 300 Watts

Diaphragm Material: Aluminum

Sensitivity: 103dB

Impedance: 4 Ohms

Frequency Response: 2KHz - 20KHz

Package Quantity: 2

Replacement Diaphragm: PRO-TW120VC

Available in: Black or Silver

• TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.
• POWER YOU CAN COUNT ON - PRO-TW120B ferrite tweeter delivers out-of-this-world power, at 200 watts RMS and 300 watts Max at 4 ohms with build in capacitor filter.
• HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.
• TAKE YOUR SYSTEM TO THE NEXT LEVEL - Get the most out of your system by upgrading to a super tweeter that gives you everything you're missing from your stock stereo. Discover what a high-end tweeter can do for you.
• 1" SUPER BULLET TWEETERS - Specifically designed Bullet dust cover to protect the voice coil and ensure that the highs cut through road noise and big bass.

User questions & answers

Question:	does anyone know if these tweets will fit in the dash of a g-body? normally a 3.5 coaxial sits in there
Answer:	the cut out hole is 3.5 inches
Question:	Is these come in a pair or its only one for that price
Answer:	The price is for the pair, you get two in the box.
Question:	Will it fit in my 2008 Nissan maxima
Answer:	Not likely, they are a custom fit super tweeter. But with enough ingenuity, you can make any tweeter fit. I have them in the stock location in my fiat 500e
Question:	Why am i already on my third set of these with 4 months
Answer:	Are you running in an amp if so you probably have gains to high. Also check wiring I blew 4 due to a wire shorting out. Make sure you are using the supplied capacitor/resistor they give. I have mine set on my pioneer running an active crossover set at 4khz

Product description

The TWS-01 are 1-inch silk dome component tweeters engineered by scar audio to deliver the ultimate experience in high frequency sound reproduction. The powerful neodymium magnets of these tweeters allow for added sensitivity and extreme power handling capability. These tweeters make for a great addition to any vehicle, whether being used in conjunction with radio power or amplified power to really allow them to come alive. Sold as a pair. Frequency response: 2.0 KHz - 20 kHz, max power: 240 watts (pair), RMS power: 80 watts (pair). 4 Ohm impedance.

• High-Performance Component Tweeter System - 2 Tweeters Included
• Max Power: 240 Watts (pair) | RMS Power: 80 Watts (pair)
• Powerful Neodymium Magnet | Sensitivity: 92 dB
• Premium Silk Dome Design Allows For Extreme Sound Clarity | Frequency Response: 2.0 KHz - 20 KHz
• Crossovers Included | 4 Ohm Impedance
• Surface, Angle and Flush Mountable Design | Mounting Accessories and Hardware Included

User questions & answers

Question:	How do I install them? And the crossover is wired between the tweeter and speaker
Answer:	Speaker wire connects to crossover wires to tweeter
Question:	Would this fit Dodge Ram 1500 2004 truck
Answer:	These are designed to fit anywhere with the included hardware and mounting brackets. If you are trying to replace existing ones, then I'm afraid I can't help you. I do know that they sound great and are well made.
Question:	Are these waterproof
Answer:	No these are not
Question:	Do these fit a Toyota 4Runner
Answer:	I don’t know. Do a online search and see what size of speakers is in your vehicle and if it has tweeters search to see what size will fit. That’s what I did before I made my Mind up to purchase them. Hope this helps. Good Luck !!

Product features

Technical Specifications

• 1” Silk Dome Component Tweeters
• Impedance: 4 Ohm
• RMS Power: 80 Watts (Pair)
• Max Power: 240 Watts (Pair)
• Frequency Response: 2 kHz - 20 kHz
• Sensitivity: 92 dB
• Powerful Neodymium Magnet
• In-line Crossover Network
• 3 Way Mounting Design: Surface, Angle, and Flush Mount

Product description

Engineered and designed in the USA by Skar Audio engineers, the VX35-ST 500 Watt 3. 5-inch high compression titanium bullet tweeters are unmatched in performance and sound. Sold as a set of 2, these bullet style super tweeters are so powerful you might think you're in a concert hall when hearing them for the first time. It doesn't stop there however, the accuracy of the high frequencies reproduced by these tweeters is unparalleled, making them the top choice among audio enthusiasts.

• 3.5-inch High Compression Titanium Bullet Super Tweeters
• Max Power: 500 Watts
• RMS Power: 300 Watts
• The Max power rating, for each tweeter is 250 Watts, for a total of 500 Watts.
• 1" High Temperature Kapton Voice Coil with In-line Capacitor Crossover
• Impedance: 4 Ohms and Frequency Response: 2.2K-20KHz

User questions & answers

Question:	is the mounting diamitor 3.5 inches
Answer:	Go direct to the amp but adjust the gain level.
Question:	Is the delivery timely
Answer:	Tweeters use a lot less power than the mids; running a 4 ohm speaker in parallel with a 4 ohm tweeter will give you a 2 ohm load - ON PAPER - but in reality the amp is mostly "feeling" the burden of the speaker. I've always ignored the ohm rating of tweeters, and just worry about the larger speaker load.
Question:	fits corolla
Answer:	Yes
Question:	Why is Amazon changing the due dates on delivery
Answer:	120 watts total not rms watts

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

The PRIME series Component System kits are a new generation of factory replacement speaker delivering authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar dome for high sensitivity and smooth extended frequency response. This low distortion material allows accurate reproduction of high frequencies for an open sound stage. Multiple tweeter mounting configurations allow flush, surface and angle configurations.

The Rockford Fosgate Prime Series A new generation of performance geared toward the "novice" car audio enthusiast, the Prime series full-range and component speakers feature legendary Rockford Fosgate sound quality while fitting into any budget.

---

R1T-S Features 1/2" (13mm) mylar balanced dome tweeter Multiple mounding configurations: flush-surface-angle Integrated 6dB/octave HP crossover

Rockford Fosgate performance at an unbelievable value. Click to enlarge.

---

R1T-S Specifications

Configuration:	1" Tweeter Kit
Midrange Diameter:	n/a
Midrange Depth:	n/a
Tweeter Diameter:	2.13" (5.4cm) Flush Mount 1.81" (4.59cm) Surface/Angle Mount
Tweeter Depth:	0.76" (1.93cm) Flush Mount 1.06" (2.68cm) Surface/Angle Mount
Frequency Response:	2.5kHz - 22kHz
Power Handling:	40 Watts RMS 80 Watts Max
Crossover:	Tweeter High-Pass (HP): 6dB
Sensitivity:	72.5dB @ 1 watt/1 meter
Grilles Included:	Yes
Mounting Hardware:	Yes

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit, Grilles/Trim Rings, Mounting Hardware, Tweeter Surface/Angle/Flush Mounts, User's Manual

Rockford Fosgate Tweeter Kits

Good: Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit	Better: Rockford Fosgate Punch P1T-S Tweeter Kit	Best: Rockford Fosgate Power T1T-S Tweeter Set

• 1/2" (13mm) Mylar balanced dome tweeter multiple mounding configurations: flush-surface-angle
• One-inch tweeter kit with 80 watts maximum power handling
• 1/2-inch Mylar balanced dome tweeter
• One-inch tweeter kit with 80 watts maximum power handling
• 1/2-inch mylar balanced dome tweeter
• Flush, surface, or angle mounting options
• High sensitivity and smooth, extended frequency response
• Frequency response: 2.5kHz - 22kHz

User questions & answers

Question:	Are these compatible with the punch series door speakers? more specifically, two 6.75’s and two 4x6’s
Answer:	They are tweeters that augment any speakers.
Question:	Are they waterproof
Answer:	No. Need Marine application for waterproof.
Question:	What is the physical size of these tweeters. Need excatly two inch
Answer:	With the flush mount ring 2.13" total 1.83" cutout required, using the surface mount 1.81" area required.
Question:	So if i hook this up to a full signal it will filter out the lows and only let the highs come through correct
Answer:	yes , they have a built in crossover . I hooked them Bridged , as you would a Subwoofer from an Amp. Meaning I used the low output from my head unit to my amplifier , then hooked up the tweeters to the High out on the head unit and it worked great . REAL CRISP SOUND . I hope that answers your question , if you have any other questions feel free to ask / Pat ..
Question:	Do these fit the nissan quest 2013. The tweeters i want to replace are the ones on the dash
Answer:	Depends on how deep it is so am not sure hook and amp to them .
Question:	where can i get the replacement coil
Answer:	These are so inexpensive, it’s not likely replacement coils are sold. The whole assembly is under 20 dollars each
Question:	how many one or two
Answer:	Two
Question:	I bought a pair and get no sound from it? Can any one help me
Answer:	The person say they get sound

Product description

New Model XXX 500W Super High Frequency Mini Car Tweeters - 4x Pair Get these high quality brand new in original packaging 500W Super High Frequency Tweeters today! Made by Nippon America Group these speakers are simple and affordable upgrade to your vehicle. Each Package Content - 2x Mini Tweeters - 2x Mounts - 2x Mounting Screws - 2x Self-Adhesive Disks

• Simple Installation / Built-in Crossover
• Sensitivity: 97dB
• Frequency Response: 5 kHz - 20 kHz
• No Magnetic Field
• Fit Any Car Audio System

User questions & answers

Question:	How many rms can they handle
Answer:	350 I never try to push more but maybe you can
Question:	How many tweeters are in the package it says 8 tweeters up top but the description says only 2 tweeters
Answer:	There is 4 Pairs (8 total) not only 2 Tweeters. Thanks
Question:	Do they come in grey or any other colors
Answer:	Only Black sorry Thanks
Question:	I have the Ssoft dome tweeter As-3353 which is Negative and positive? black and white wires
Answer:	Blk should be negative and white positive.

Product description

Pyramid TW28 3.75 Inch Aluminum Bullet Horn In Enclosure with Swivel Housing

• 2k 25kHz FREQUENCY RESPONSE: Pyramid’s 3.75” aluminum bullet horn with 1” titanium dome tweeter speaker has enhanced Ferrofluid and 2k 25kHz frequency response that will complete a sound system of a boat or any marine vehicle or woofer enclosure
• 300 WATT POWER: This bullet horn super tweeter speaker provides up to 300 watts peak power because it is equipped with 20 oz magnet structure. It's all housed in heavy duty aluminum with swivel housing
• 4 OHM IMPEDANCE: This marine speaker has 4 ohm impedance rating that compensates the undersized wire found in many of today’s marine vehicles. It ultimately reduces distortion so you can enjoy a crisp and clear sound
• STANDARD SIZE: Pyramid follows the standard size for most marine stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation
• COMES IN PAIR: This set of tweeters come in a pair in a gift box with all necessary hardware which is very easy to install with compensation capacitors. Additional feature includes 1”high temperature voice coil

User questions & answers

Question:	Are they aluminum ? Th
Answer:	Yes
Question:	Do they come in pairs
Answer:	Positive is bigger wire or if it's a clear wire , when u strip it , gold is always hot
Question:	Home use. Other sites list TW28 as 4ohms. Back of TW28 says 4-8ohms. OK to run speaker wires directly from 8ohm speaker terminals to TW28 terminals
Answer:	Honesty it’s 50 Watts a channel but I have 100 going to each speakers and have never had a problem. Great sounding speakers that are underrated
Question:	What's the recommended type of cable connector for these speakers
Answer:	No

Product description

The Ignite Pro 4" Titanium Build Super Tweeter is a sure addition to any sound enthusiasts system needs.

• 4" Super Tweeters, 1.5" High Temperature Kapton Voice Coil
• Dimond Chrome Cutting Finish, Die Cast Aluminum Frame
• Peak Power Handling- 1500W(Per Tweeter)/ RMS Power Handling: 450W (Per Tweeter)
• Impedance: 8 Ohms / Tweeter Size: 4" Square
• Ferro Rluid Enhanced Voice Coil/ Sensitivity: 109 dB/ Frequency Response: 3k-22kHz

User questions & answers

Question:	Do these fit the nissan quest 2013. The tweeters i want to replace are the ones on the dash
Answer:	I stopped mine at 18 hours.
Question:	where can i get the replacement coil
Answer:	Dear customer, This camping lantern clip on fan is very suitable for camping at night. There are 22 LED lamp beads in the lamp belt of the fan, so it is bright enough and meets your camping needs. Should have any problem, please contact us freely. Have a good day. Thank you.
Question:	how many one or two
Answer:	Dear customer, This personal fan provides 10-40 hours of operation after a full charge. The time of operation depends on the selected speed mode. Should have any problem, please contact us freely. Have a good day. Thank you.
Question:	I bought a pair and get no sound from it? Can any one help me
Answer:	Dear customer, You can use the 5V/2A cable and connect it to laptop, 2A charger or power bank to charge it. We would recommend to charge with 2A adapter as it supports fast and secure power supply. If you have any problem, please contact us. Regards, Thank you.

Product description

The new FSX series 6.5-Inch pro audio speaker features a high quality ferrite magnet and were designed to be very loud and powerful mid-range speakers. We wanted to develop a high power pro audio mid that offered our customers looking to run a large quantity of this type of speaker a practical solution at an affordable cost, but without sacrificing quality. That is exactly what this speaker brings to you. Rated at a conservative 150 watts RMS power and 300 watts max power, and featuring a 4 ohm voice coil, these will shine on proper amplified power. Sold individually. Magnet type: ferrite, magnet weight: 20 oz., voice coil: 1.5" Copper, basket: pressed steel, RMS power: 150 watts, max power: 300 watts.

• Skar Audio FSX65-4 6.5" 4 Ohm mid-range speaker
• 300 Watts Max | 150 Watts RMS
• 1.5" Voice coil - Ferrite magnet
• Sensitivity : 92.5 Db 1w/1m
• Sold Individually (Set of 1)
• Dust Cap Material:Solid Composition Paper

User questions & answers

Question:	How is the bass on these
Answer:	Yes, that is why it says 140 watts RMS.
Question:	Will this fit my 2018 F-150 rear door? I do not want to cut
Answer:	Yes. It will help keep the clarity of the music at a higher volume. Don't exceed the RMS power rating of the speaker.
Question:	I need to buy a mid-range woofer to replace in the box of my Samsung soundbar subwoofer? Does this have good bass that can play at high levels of vol
Answer:	4 ohms
Question:	is the for the pair or a single speaker
Answer:	50 rms a speaker. Honestly wasn't impressed with this set

Product description

The Pyle-PH391 Tweeters are at the top of their class. Ranking at the top of consumer list's for both affordability and durability, these 4"x10" compression horn tweeters pack quite a punch.

• 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style
• 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction
• 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
• 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size
• 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D

User questions & answers

Question:	Can you use these for a house stereo
Answer:	No since bmw have their speakers and tweeters glued to the plastic frame and not the metal. You would have to buy and adaptor kit or get it installed customized by someone.
Question:	Can I put this under the hood of my car
Answer:	Yea the external part does come off.
Question:	Is it loud
Answer:	Yes, 2 tweeters and 2 crossovers.
Question:	Is this sold as a pair, or is it each
Answer:	Yes they do but I would recommend a 4 channel amplifier. They don't sound amazing on stereo but they do on an amplifier

Product features

4'' x 10'' Horn Tweeter

• Max Power Rating: 200 Watts
• 20 oz Magnet
• Sensitivity: 102dB @ 1W/1M
• Frequency Response: 1kHz - 15kHz

Product description

Pioneer TS-A300TW 20mm 450 Watt Component Tweeter

• 20mm polyimide (PI) hard dome tweeter
• Included multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations
• Inline high-pass network for simple installation

User questions & answers

Question:	Will a 50 watt stereo drive a 400 watt speaker
Answer:	Yes, I connected mine to a stock stereo/headunit that pushes a low amount of watts and it worked. The sound is better than stock ones and if you don't have any tweeters at all then you will really notice a difference.
Question:	Will these fit my 2014 ford f
Answer:	The twitter is universal, will fit any car with 1 inch hole.
Question:	How many watts (rms) per tweetr
Answer:	300 watts at 4 ohms, 500 watts at 2 ohms.
Question:	Dose this come 1 or 2 speakers
Answer:	it comes with two

Product features

Pioneer TS-A300TW 20mm 450 Watt Component Tweeter

• 20mm polyimide (PI) hard dome tweeter
• Included multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations
• Inline high-pass network for simple installation

Easily Upgrade to High Performance

Pioneer’s A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music.

Easy Installation

Included tweeter mounting for surface mounting, flush mounting and specially designed multi-fit adapters for mounting in original equipment (OE) tweeter locations. Integrated/in-line crossover network eliminates the need for an outboard module to increase installation flexibility

OPEN & SMOOTH

Pioneer’s OPEN & SMOOTH sound concept provides a seamless and smooth transition between the midrange and tweeter drivers and delivers uniform off-axis frequency response optimized for automotive applications where one or more speakers are often aimed away from the listeners’ ears.

CarSoundFit App

Pioneer’s CarSoundFit app is actually a car sound simulator for experiencing in-car sound with your own smartphone. Hear the difference between original car speakers and different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer for your vehicle. For a virtual listening demonstration of these and many other Pioneer car speakers, download Pioneer CarSoundFit app.

Product description

1" TWT Series Car Tweeters

• 1" TWT Series Car Tweeters
• Power Handling: Peak: 220 watts per pair / 110 watts each / RMS: 110 watts per pair / 55 watts each
• PEI dome tweeter
• 4 ohms impedance
• Surface or Angle Mountable

User questions & answers

Question:	Do it come with some wire
Answer:	Yes, these are an aftermarket upgrade pair of car tweeters. They're amazing
Question:	Puedo conectarlas a los bajos
Answer:	These will work great for car audio, motorcycles, utv/ atv, and many other applications.
Question:	How will these sound on a amp? Because i already have one hooked up to 4 6x8s. Might just hook these up with it
Answer:	This listing is for a pair of speakers
Question:	Is this a pair
Answer:	The CT2 (new) and the CT2II (old) are the same product other than the CT2II had an external crossover and the CT2 has inline crossovers as seen in the images . We did have a CT2 back in 2006 that should not be confused with the new CT2 you see here. We see the description says CT2II and it should just be CT2 - We should have called this CT2 III and sorry for the confusion!

Product description

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. In The Box: 1 pair of tweeters Tweeter surface mount accessories Tweeter flush mount accessories Owner’s manual Description - 3/4" (19mm) tweeter component speaker Power Handling: 45W RMS, 135W peak Sensitivity (@ 2.83V) - 93dB Frequency Response - 2.5kHz – 21kHz Impedance - 3.0 ohms The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels. Harman’s patented (US patent #7,548,631) Plus One cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output and accurate music reproduction. Reference speakers provide step-up Infinity sound at mainstream prices.

• Edge-driven textile tweeters for smooth, clear highs.
• Newly engineered baskets are optimized to fit most factory speaker locations.
• Competitive pricing - Reference speakers provide step-up Infinity sound at mainstream prices.

User questions & answers

Question:	Do these speakers come with the wiring
Answer:	I used them on my boat last year and held up just fine
Question:	Do these come with starfish mounts
Answer:	It is a pair of tweeters
Question:	So would 75-80 Watts rms be okay for these tweeters
Answer:	Yes, this is what the crossover is for.