11 best stereo equalizers

Product description

Ultra-Compact 9-Band Graphic Equalizer with FBQ

If we all lived in a perfect world, there would be no need for audio equalization. Sound systems would be perfect and would reproduce perfect signals in all their glorious perfection. Also, everyone in that perfect world would like the same amount of bass, midrange and high frequency, and there would be no such thing as feedback. But the world isn't perfect, is it? Even the best sound system can benefit from the use of a good EQ--like the FBQ800.

Even the best sound system can benefit from the use of a good EQ. Click to enlarge.

1/4-inch and RCA inputs and outputs.

Nine steps of graphic EQ.

How Does it Work?

Imagine the frequency range of the sound you hear as a highway, a very wide one with nine lanes. Each of these "lanes" represents a single octave of the sonic spectrum. The first four lanes, labeled 63 - 500 (Hz) contain the really low frequency sound content, mainly bass, bass vocals, and the kick and tom drums. The three lanes labeled 1 k, 2 k and 4 k (Hz), make up the fundamental zone of most musical instruments and the male and female vocals. 8 k and 16 k cover the frequency range of cymbals, snare drums and higher pitched percussion instruments. The FBQ800 allows you to control the flow of audio traffic in each of these nine lanes. When properly applied, EQ makes it possible to hear all of these frequency ranges equally, thus the term equalization.

Feedback Elimination

When a specific frequency, or range of frequencies, reaches too high a level, feedback occurs--that all-too-familiar squeal or howl you get when the mic is too close to the speaker. Basically, feedback happens when there is so much of a particular frequency that it is picked up by the mic and run through the system again. That's why feedback typically gets louder and louder the longer it's allowed to occur. Needless to say, this kind of feedback is very undesirable.

This is where the FBQ800's Feedback Detection System really works its magic. In this ingenious circuitry, LEDs on the individual faders light up when that frequency band is approaching the danger zone. All you need do is lower the illuminated slider until the LED blinks out--voilá, feedback problem solved! What once required a highly trained ear is now an activity that even a child can master.

Sonic Toolkit

That really is the best way to describe the FBQ800. With its nine frequency bands, you easily fine-tune your sound and instantly eliminate feedback. And each fader can be used to boost or cut the frequency range it controls by as much as 12 dB (and that's a lot!).

Special attention is paid to the low frequency zone. In addition to low frequency faders, the FBQ800 features a Low Cut filter for removing unwanted low frequencies such as fl oor rumble, room resonance, electrical hum, etc. This is especially handy if your system is being used for speech rather than music.

To Boost or to Cut, That is the Question

Raising and lowering specific frequency bands can improve the frequency response of any room's acoustics. For instance, if the room you're in is "bass-heavy," lowering the 63 and 125 Hz faders can help eliminate an overall "boomy" or "muddy" sound. Likewise, gently boosting the 8 and 16 k sliders can add sparkle to a somewhat "dark" mix. Are the vocals getting lost in the mix? Raising the level of the 1 k slider can help bring them out.

It's important to note that raising a single fader level is not always the best solution; it's often better to lower the bands surrounding the frequency you want to bring out, and then boost the overall volume level to achieve better headroom.

Built for Accuracy and Reliability

Speaking of headroom, FBQ800's 6-digit LED Input/Output meters and level control are provided for precise level maintenance. Longterm reliability is ensured, thanks to high-quality illuminated faders and switches, and our ultra low-noise audio operational amplifiers provide outstanding sonic performance. In addition, all Mini Series components may be stacked to create an ultracompact signal processing solution.

What's in the Box

Behringer FBQ800 Ultra-Compact 9-Band Graphic Equalizer, Power Supply, User's Manual

• Ultra-compact 9.5" graphic equalizer for studio and stage applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as Audio Analyzer
• Additional Low-cut filter removes unwanted frequencies, e. g. floor rumble
• Accurate 6-segment LED input/output meters and Level control for precise level indication
• High-quality illuminated faders, potentiometers and illuminated switches for long-term reliability

User questions & answers

Question:	What type of cables are required to hook this up between an amplifier and yamaha receiver? Much appreciated
Answer:	Both
Question:	Can you adjust each channel (left/right) separately
Answer:	Nope, the only things lit are the little indicator lights for power +/- 12dbs and something else.
Question:	I see many mention that they use this for helping hearing loss by using this unit with headphones. My question is how do you use this with headphones
Answer:	They are very clean sounding eqs.
Question:	does it connect to amplifier
Answer:	First, this is not a player. This is a tone control with instead of just the normal bass, treble and high, divides it into 31 (from 20HZ to 20KHZ). Also, this model is mono (1 channel). You can get 2 of these or get the stereo model. You still need an amplifier and a player. You hook this up between a like a CD player and your amp.

Product description

Product Highlights: Most equalizers used for live sound mixing will allow you to affect frequencies across a variable frequency range. In general, if you’re trying to tune a sound by emphasizing desirable frequencies or pulling back less important frequencies, then you’ll be better off keeping the bandwidth fairly broad. On the other hand, if you’re trying to notch out hum, tame hiss, or carve out some other unwanted sound, then you’ll preserve your overall sound better by narrowing in on the frequencies you want to remove. Once you get into the world of digital mixers, studio-style fully parametric EQs become more common. These equalizers not only allow you to adjust the center frequencies of the mid bands, but they also allow you to dial in the bandwidth to make precise alterations to your sound, boosting board frequency ranges for added warmth or notching out an annoying resonance at 1.5kHz. While this surgical precision can be incredibly useful, it’s important not to get mired in minutia that can take up time you simply don’t have in live music production. That's why we are introducing our best Spectrum Equalizer for the price. It's an all around EQ's that everybody love. Great Sound! Great Light! Technical Details: Dual 10 Bands EQ With Blue LED Four Audio Source Line Input 4 RCA line input 2 RCA line Output Removable Rack Mount Brackets Spectrum Graphic Display Screen 110V/220V Switchable Power Source Dimensions: 16.9'' x 9.3'' x 2''

• Ten Bands of graphic EQ per Channel
• Multi-colored spectrum analyzer display shows the output of the system
• LEDs in all sliders, Two Line inputs and dual tape monitor loops
• Tuner | CD | TAPE | DVD inputs!
• Power supply MAX:20W
• NOTE: Refer the User Manual before use which is highly essential.

User questions & answers

Question:	can the output be sent to headphones
Answer:	No your source is put into the EQ and out to your amp
Question:	What are the actual dimensions. Is it 2” or 4” tall
Answer:	Around 4" it is a piece of junk I threw mine in the trash. Go to ebay they have lots of equalizers on there.
Question:	When in operation, what does the center window display
Answer:	The center window is NOT spectrum analyzer. It is one color only, and they all move at the same time. This equipment is junk, it is not worth more then 20.00
Question:	Can i hook this up to my home component cd player, or do I need a reciever also
Answer:	you can hook this up in line between a component, cd player, going to an amp. this will not power speakers.

• Package Includes: Rockville REQ20 19" Rack Mount Pro Dual 10 Band Graphic Equalizer EQ w/VU Meters, Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper
• Features Of REQ20: Dual 10 Band Graphic Equalizer (20 Bands Total), Frequency Response: 20Hz - 20KHz, Dual VU Meters Level Monitor, Blue LED on each Equalizer Slide Control, Stereo RCA Line Input, Stereo RCA Line Output
• Vacuum Fluorescent Display, Bass/Midrange/High EQ Controls, Separate Left/Right Channel Volume gain control, Signal to Noise Ratio: >88dB, Input Power: AC ~ 110V 60H/220V 50Hz, 110/220V Switchable, Front Panel Power Switch, Removable Rack Mount Brackets, Dimensions: 17"(19" w/brackets) x 9" x 2.2", Weight: 5 lbs
• Features of RCDR10B: Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable, Dual RCA to Dual RCA, Nickel-Plated for Rugged Durability and Efficient Signal Transfer, 100% Copper Conductors for Enhanced Signal Clarity, OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility, Length: 10 Ft, Color: Black

User questions & answers

Question:	Will this work with denon avr 2112ci receiver
Answer:	Yes you can. I only use 2 channel receivers. Not into cinema and avr receivers. I use an external audio source selector. Available on Amazon. Mine handles 3 sources. But selectors with more source inputs are available. I run my sources to the inputs on the selector. Then run the single output to the auxiliary input or in the case of newer receivers, input 1,2 or 3. For my application it works very well. Technically you can connect this eq to your Denon or any other receiver without the in out loop.
Question:	what would cause this to make an awfull hissing sound ? right now its useless
Answer:	Trying to diagnose sound equipment is not always easy. A hum usually means a bad ground. A his could be a lose connection or a bad cable. First see if the noise is on both sides or just one. Single side noise try changing a cable from the left to the right to see if the hiss changes sides. If it does change does change out the cable. If the his stays then you have a speaker problem. If the his is on both sides check your ground. Hope this helps.
Question:	Can I connect this to a yaqin mc-13s
Answer:	You should beable to if u use aux cables for it
Question:	Can it be connected straight to a 200 watt am/fm home reciever
Answer:	Yes it will work very good with all types of recievers And 200 watts that's enuff to do alittle bit on thumppin I also have 200 watt receiver and with ROCKVILLE SOUNDS EVEN GREAT DEPENDED ON UR SPEAKER SIZE I HAVE 2 15 AND 2 SURRENDER NICE

Product features

Rockville REQ20 19" Pro Rack Mount Dual 10-Band Graphic Equalizer EQ+VU Meters

Package Includes:

• Rockville REQ20 19" Rack Mount Pro Dual 10 Band Graphic Equalizer EQ w/VU Meters
• Rockville RCDR10B 10' Dual RCA to Dual RCA Pro Audio Cable 100% Copper

_________________________________________________________________________________________________________________________________________________________________

Features of REQ20:

• REQ20: Dual 10 Band Graphic Equalizer
• Dual 10 Band Graphic Equalizer (20 Bands Total)
• Frequency Response: 20Hz - 20KHz
• Dual VU Meters Level Monitor
• Blue LED on each Equalizer Slide Control
• Stereo RCA Line Input
• Stereo RCA Line Output
• Stereo RCA Line Output for Record
• Vacuum Fluorescent Display
• Bass/Midrange/High EQ Controls
• Separate Left/Right Channel Volume gain control
• Signal to Noise Ratio: >88dB
• Input Power: AC ~ 110V 60H/220V 50Hz
• 110/220V Switchable
• Front Panel Power Switch
• Removable Rack Mount Brackets
• Dimensions: 17"(19" w/brackets)  x 9" x 2.2"
• Weight: 5 lbs

_________________________________________________________________________________________________________________________________________________________________

Features of RCDR10B:

• Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable
• Dual RCA to Dual RCA
• Nickel-Plated for Rugged Durability and Efficient Signal Transfer
• 100% Copper Conductors for Enhanced Signal Clarity
• OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
• Length: 10 Ft
• Color: Black

• TOP RATED CAR AUDIO EQUALIZER | The EQ4 Massive Audio Car Stereo Equalizer is a half din 4 band graphic equalizer that will correct peaks and dips in sound characteristics associated with most vehicles' interior. This Graphic Equalizer also features a switch to change the LED color from Red to Blue depending on the interior of the vehicle.
• MORE TUNING CONTROL | With Stellar features such as: Adjustable Master Volume Level, Adjustable Subwoofer Level, 2-Channel RCA Aux Input and Adjustable Gain, 4-Band, 1/2 DIN, 8V Line Driver, Auxiliary inputs, 6-Channel / 7V RCA Outputs, you can take full control on how you like your music to sound! Clearer, Better, Perfect.
• SAY GOODBYE TO WHITE NOISE | Don't waste your time or money on cheap quality Car Audio Equalizers that produce a lot of background noise. With Selectable 12dB Low-Pass Crossover (60Hz or 90Hz), and Nickel Plated Terminals, you're sure to get great crossovers and perfect sound quality.
• EASY TO INSTALL. LONG LASTING. | The Massive Audio EQ4 Car Audio Equalizer is easy to install and produces amazing results for years! The EQ4 is the perfect device to enhance your Car Audio's performance, and the Best Car Equalizer in its class! Dimensions: 7"(W) " 1"(H) " 4 1/8"(D)
• MASSIVE AUDIO QUALITY | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.MASSIVE AUDIO QUALITY | Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers.

User questions & answers

Question:	How hard is it to hook up a equalizer to my Kenwood car stereo
Answer:	Yes. Search for Mobile Home Skirting door on Amazon.
Question:	Would this make a huge difference with 4 6.5 mids and 2 tweeters
Answer:	You will 141 panels to go around your home.
Question:	This can be used to take the 2 rca inputs from head unit and make them multiple rca outputs for a 5 channel amp
Answer:	Link below for Lifestyle https://www.amazon.com/Mobile-Home-Skirting-VENTED-Panels/dp/B017RR45LI/ref=sr_1_4?dchild=1&keywords=mobile+home+skirting+35%22&qid=1597527073&sr=8-4
Question:	Does thing have separate inputs channels for front and rear speakers
Answer:	No. Just the panels.

Product features

Massive Audio EQ4 Car Equalizer

The Massive EQ 4 is a half din 4 Band Graphic EQ that will correct peaks and dips in sound characteristics associated with most vehicles' interior that dampens and limits both speaker output and imaging. This EQ provides powerful features in a compact size

Product description

Rockville REQ42-S



The Rockville REQ42-S is a 19” rack mountable equalizer that has individual LED

indicators and RCA outputs. It has a frequency response of 20-20,000 Hz and a

Signal to Noise Ratio Signal to Noise Ratio of 80dB. This equalizer has a weight

of 6 lbs.

Features:

Rockville REQ42-S Silver 19" Rack Mount 2 x 21 Band Equalizer w/Spectrum

Analyzer



19" Rack Mountable



Dual Channel 21+21 Band Graphic Equalizer (total of 42 bands)



Blue LED on each Equalizer Slide Control



RCA stereo input: DVD/Tape/Tuner/Aux-MP3 with Front Panel Selector Switch



RCA Stereo Record Output



Front Panel 3.5mm iPod/MP3 Player Input Jack



Dual VU Meters Level Monitor



Individual LED Indicators



Outputs-RCA (REC, Mail)



Multi Color LED Display



Low/High Function



Frequency Response: 20-20,000 Hz



Signal to Noise Ratio: 80dB



Removable Rack Mount Brackets

• Rockville REQ42-S Silver 19" Rack Mount 2 x 21 Band Equalizer w/Spectrum Analyzer.
• 19" Rack Mountable.Dual Channel 21+21 Band Graphic Equalizer (total of 42 bands).
• Blue LED on each Equalizer Slide Control.
• RCA stereo input: DVD/Tape/Tuner/Aux-MP3 with Front Panel Selector Switch.
• RCA Stereo Record Output. Front Panel 3.5mm iPod/MP3 Player Input Jack.
• Dual VU Meters Level Monitor. Individual LED Indicators.
• Outputs-RCA (REC, Mail).Multi Color LED Display.

User questions & answers

Question:	i dont have rca plugs int he back of my stereo. how i can conect this eq to my stereo thanks
Answer:	You could probably use a product like this: https://smile.amazon.com/gp/product/B07H94D77V/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=UTF8&psc=1 I use one in a similar application. You would need to add a 3.5mm stereo plug to two RCA cable.
Question:	I cant get the slide controls to change any kind of frequency. Can you help
Answer:	There is a button that says EQ , if you do not engage the EQ your in bypass mode and there will be no Equalization . So press that button , but turn the volume to a lower level , because when the the EQ is engaged the volume will bump up . And also make sure your connections are correct, stereo out to EQ in . If your not sure if your hook up is correct refer to you Stereo owners manual.
Question:	i have a sherwood receiver and yamaha speakers for outside deck,would this eq work for this
Answer:	Depends upon the inputs and outputs for your receiver. Also depends upon whether your receiver supports an equalizer loop. Also depends upon whether you pipe other sources into your receiver or not. Don't take this equalizer outdoors, of course.
Question:	How does the spectrum analyzer work
Answer:	Very pleased....good rich sound

Product features

Rockville REQ42-S Silver 19" Rack Mount 2x21 Band Equalizer w/Spectrum Analyzer

The Rockville REQ42-S is a 19” rack mountable equalizer that has individual LED indicators and RCA outputs. It has a frequency response of 20-20,000 Hz and a Signal to Noise Ratio Signal to Noise Ratio of 80dB. This equalizer has a weight of 6 lbs.

Features:

Product description

The EQS755 is 1/2-DIN chassis Graphic EQ w/ built-in low-pass filter. Equipped with a full-featured 7-band Graphic equalizer, you will enjoy superior control over the audio spectrum with frequency adjustments in the 50 Hz to 16 kHz range over seven bands. This gives you the power to get the most of your sound system, and the ability to contour the sound output to your musical taste.

• 1/2-DIN chassis graphic equalizer with built-in low-pass filter6-channel/ 8-Volt RCA outputs (front, rear and subwoofer)7-ban graphic equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2Khz, 6Khz, 16Khz)
• 3.5mm Front aux input2-channel RCA aux input with variable gain adjustments and high level speaker inputs
• Blue illuminationindependent master volume and subwoofer level Control with fader control select able 12Db low-pass Filer (60Hz or 90Hz)
• Ground loop isolation circuit Dimensions: 7"(w)x4-1/4"(l)x1"(h)

User questions & answers

Question:	What size are the screws
Answer:	Do not know. But it is well made and probably not need of repair for a long while to come.
Question:	Can you hook this up to subwoofer and door speakers? Got 3000watt ssl evo amp and 2500watt audiotek for doors. Please help
Answer:	Yes ,I guess so
Question:	does this amp remove distorcion and make speakers louder
Answer:	Yes it's a 2 channel equalizer
Question:	Does this double as a line converter for factory sterols without RCA outputs
Answer:	I ordered these twice and got 5 pieces with each order

Product description

BEHRINGER 15BAND EQ WITH FBQ

• Professional 15-band stereo graphic equalizer for live and studio applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
• Ultra-low noise 4580 operational amplifiers for highest signal integrity
• Dedicated mono subwoofer output with adjustable crossover frequency
• Additional low-cut filter removes unwanted frequencies, e.g. floor rumble

User questions & answers

Question:	Hi. How would you connect this to a behringer xenyx mixer to fine tune your music? Thanks
Answer:	Sure anything that can handle XLR or RCA inputs is great to use with this versatile unit.
Question:	I read the older model got really hot, Does this one have the same problem
Answer:	I don't know about the older model but I have two of these each sitting on top of 2 Sonic Exciters, on top of 2 Crown 1000 amps in the same open rack. It doesn't seem to generate much if any heat. These are nice units especially for the price.
Question:	will this eq hook to my receiver wth regular rca cables
Answer:	hello. this EQ will not be able to connect to your receiver with RCA cables. This unit can only be connect via XLR or 1/4in TRS cables. you can always buy and adapter connect weather its XLR or 1/4in TRS. let me know if this is helpful.
Question:	Can you hook this up with just xlr cables
Answer:	yes, XLR or 1/4" TRS

Product features

BEHRINGER (FBQ1502HD)

• Professional 15-band stereo graphic equalizer for live and studio applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
• Ultra-low noise 4580 operational amplifiers for highest signal integrity
• Dedicated mono subwoofer output with adjustable crossover frequency
• Additional low-cut filter removes unwanted frequencies, e.g. floor rumble
• Highly accurate 4-segment LED output metering and input gain controls for easy level setting
• Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors

ULTRAGRAPH PRO FBQ1502HD

Professional audio engineers have known for decades that a good EQ makes all the difference in how a performance is perceived. Although multi-band graphic equalizers have been around for a long time, they have changed very little… until now! The ULTRAGRAPH PRO FBQ1502HD takes the graphic equalizer into the realm of high-definiton audio, providing robust features and our proprietary FBQ Feedback Detection System

How Does Equalization Work?

Imagine the audio frequency range as a very wide highway with lots of “lanes”. Each of these lanes represents a specific frequency band.

• The lanes on the left side contain the really low frequency content, mainly bass, bass vocals, and the kick and tom drums
• The middle lanes make up the fundamental zone of most musical instruments and the male and female vocals
• The right-hand lanes have all the highfrequency stuff, such as snare drums, cymbals, higher pitched percussion instruments and the content that adds sizzle to the mix

Ultra-Low Noise Operation

The high-definition FBQ1502HD provides superb, ultra-low noise performance thanks to German engineering, and the use of quality components. 4580 dual operational amplifiers are employed throughout for the utmost signal integrity across the entire audio spectrum. With 15-bands of smooth and precise equalization per channel, the stereo FBQ1502HD adds the finishing professional touch to your recordings and live shows.

Built in Crossover

Speaking of special low-frequency tools, the FBQ1502HD also has a dedicated subwoofer output with an adjustable (30 - 200 Hz) cut-off frequency. Balanced XLR Outs are provided so you can connect to power amps or directly to your active subwoofers, without any additional hardware.

Product description

7 BAND PASSIVE STEREO GRAPHIC EQUALIZER WITH FADER CONTROLSOUNDXTREME 7 BAND PASSIVE STEREO GRAPHIC EQUALIZER WITH FADER CONTROL ST-EQ-180

• Featuring: Adjust gain Control / Output level Display/ EQ Slide Control / Subwoofer Xover Points / Subwoofer Switch
• Specification:
• EQ Center Frequencies: 60, 150, 400, 1K, 2. 5K, 6K and 15Khz / Equalization Range: +/- 12dB
• Input Impedance: 100 Ohm / Input Sensitivity: 4 Volts for 500mV out
• Frequency Response: 20hz to 20kHz +/- dB / Crossover Rolloff: 12dB/Octave / Power Requirement: 11-16V DC

User questions & answers

Question:	Este ecualizador necesita un conectar a un amplificador
Answer:	Si este equalizador es pasivo y nesecita un amplificador de 4 canales
Question:	Can I get this to work at home
Answer:	no, it is a 12 volt system and your house is 120 volts
Question:	I bought this to connect to bluetooth 4 channel amp on harley should work good for that right
Answer:	If you're using a 4-channel amp you have two channels for the front and two channels for the rear there is one channel left for the subwoofer you can add one more amp if it's a 2 channel amp you will want to bridge it to one channel for the subwoofer
Question:	Can this EQ be connected direct to the speakers like the old ones, I'm looking for one that not need to connected to an amp
Answer:	Yes you can, but the quallity of this equalizer is to poor!

Product description

Specifications:

Material: Metal

Color: Black

Input Impedance: 22KΩ

Output Impedance: 200Ω

Frequency Response: 20Hz~20KHz

Total Harmonic Distortion: 0.05%（1KHz）

Signal to Nosie Ratio: >90dB

Plug: US

Working Voltage: 110-240V

Item Size: 48 * 12 * 4.5cm / 18.9 * 4.7 * 1.8in

Item Weight: 2kg / 4.4lb

Package Size: 56 * 26 * 10.5cm / 22 * 10.2 * 4.1in

Package Weight: 2.5kg / 5.5lb



Package List:

1 * Equalizer

1 * Power Cable (US)

1 * User Manual (English)

 

• Professional dual channels stereo graphic equalizer.
• 15-band design with ±12db adjustable range for each channel.
• With LOW-CUT switch for effectively eliminating the low frequency noise.
• With BYPASS switch for convenient machine debugging.
• XLR balanced and 1/4" TRS unbalanced inputs & outputs.

User questions & answers

Question:	Does it have bluetooth
Answer:	Any 1/4" connector is unbalanced.
Question:	hello i received this EQ and it sounded great but the output level control for the right channel failed after a week. how can i get a new EQ
Answer:	Sorry, again don't know. Haven't tried it.
Question:	Are these 1/4 inch trs inputs and outputs unbalanced
Answer:	It might be a bit tall but honestly, we hooked this up to the home stereo and computer thru the TV for youtube and use it that way.... Then the mics are in hand. This is a total blast and comes out at every party.... Adults included!
Question:	How can I connect dual balance input to EQ-215 to a single output to mixer
Answer:	Your recording device/phone has a USB port (that part of the charger that goes into the computer or the charger plug itself) check to see if you TV has a USB port and you are good to go. You can also get a jack that can be used with both the TV and Memorex. Merry Christmas and good luck.

Product description

If you’re a person fed up with a low-quality audio player, then a car equalizer may be just what you need. Selecting a good one, however, makes all the difference between mediocre sound and an audio party in your car. This unit gives you great value for your money and satisfaction with a perfect music and sound. It will allow you to adjust the frequencies, and the loudness of the mids, highs, and lows coming out of your speakers. Some specifications of Audiobank EQ7 1/2 Din 7 Band Car Audio Equalizer EQ are: Seven equalization bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2kHz, 6kHz, and 12kHz), each frequency is adjustable from -12 to + 12dB (-15 to +15dB for subwoofer frequencies), Subwoofer output uses a built-in 43-120Hz, 60-200Hz, Three stereo RCA outputs to drive front, rear, and subwoofer audio amplifiers, An auxiliary stereo RCA input for use with portable devices, such as an MP3 Player or DVD player, Separate controls for master volume, subwoofer volume (sub level), front/rear fader, and selection of main or auxiliary inputs, We have been providing a huge amount of this items to customers. They love them and keep sending us more friends for installs this equalizer as well. We are getting incredibly good feedback from our valued customers.

• Seven equalization bands each frequency is adjustable from -12 to + 12dB
• - Subwoofer outpSubwoofer output uses a built-in 43-120Hz, 60-200Hzut uses a built-in 43-120Hz, 60-200Hz
• Three stereo RCA outputs to drive front, rear, and subwoofer audio amplifiers
• An auxiliary stereo RCA input for use with portable devices, such as an MP3 Player or DVD player
• Separate controls for master volume, subwoofer volume and selection of main or auxiliary inputs

User questions & answers

Question:	When Fader is all the way to the left there is no sound at all
Answer:	Check your inputs, if left input has no cable that equals no sound.
Question:	Has anyone tried this in a home audio system? Was it successful? Were there any compatibility and distortion problems
Answer:	This is an equalizer for automotive stereos, not home stereos

Product description

• Front Adjustable EQ Band Frequencies: 125 Hz, 500 Hz, 3.5 kHz, 12 kHz
• Rear Adjustable EQ Bands Frequencies: 50 Hz, 600 Hz, 6.3 kHz
• Switchable Subwoofer Filter 32 Hz – 128 Hz, Frequency Response 10 Hz – 15 kHz
• Inputs: Dual 2 Channel Source. Outputs: Front, Rear & Sub. Fader Control
• Gain + / - 18 dB, Maximum Input Voltage 15 Volts, Maximum Output Voltage 8 Volts
• Signal to Noise Ratio > 110 dB, Channel Separation 20 dB, Total Harmonic Distortion 0.050
• Dimensions: Depth 4.6” x Width 7” x Height 1”

User questions & answers

Question:	Do it have a soft or hard trun on
Answer:	Soft turn on
Question:	Can I use this from phone or mp3 music player to my marine amp/Sub and 4 powered 2-way speakers? Or just to amp
Answer:	If you know what do you can make it work.
Question:	I have a 4k watt amp , 8 farad capcitor , soundstream epicenter , will this product be able to replace my epicenter or just enhance my sound further
Answer:	It will work as both equalizer and epicenter. Having both epicenter and equalizer enhance your sound quality to the maximum standard as long as you have good quality speakers. Am using both epicenter and equalizer and my sound quality is booming.
Question:	Can you use without car amps
Answer:	No