Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

The Rockville RV12.2B Dual 12" 1200 Watt Vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. Most packages that have a 2 Channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings.

• Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
• Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
• Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
• 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
• 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder

User questions & answers

Question:	Are they wired series or parallel
Answer:	Series
Question:	can i use the amp with 2 Dual 12 inch speakers
Answer:	Yes you can. Just ensure that the amp is mounted where it can get some flow of air
Question:	Will it work with a 2002 Toyota Highlander with stock stereo
Answer:	Of course any system can work with a stock stereo just make just you know how to install or get a professional
Question:	I plugged and wired everything up correctly and it doesn’t work!!! Can someone please help me
Answer:	did you test it before you put everything back in? after you wire everything you should just hook the speakers up and test them to make sure you're good... if you aren't getting any power i would check your wiring and make sure the ground is good.. and everything is up to par.. if your stereo doesn't have power either then you should make sure it's connected properly to the harness.. Make sure your wires are color matched properly.. make sure you have the right wiring harness for your car... ask the question again with more details if you haven't already fixed it.... installed these and they work beautifully

Product features

Rockville RV12.2B 1200w Dual 12" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

The Rockville RV12.2B Dual 12" 1200 watt vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. most packages that have a 2 channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings. CEA-2006 compliant means that these are tested and rated by the same industry standards used by other famous brands like Kenwood, Sony, Kicker, etc. The subwoofers in this package are of superior quality. They feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features.The distinct advantage of the Rockville Bass Packages are that our systems from the woofers to the enclosures and amplifiers were all designed and engineered from scratch to work specifically together as a system. We tested these for months to ensure these met our rigorous quality standards. The final result is a super efficient bass response with loud, deep and clean sound.

• Package Includes: Rockville RWS12CA Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure, Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
• Features of RG212CA: Rockville RG212CA Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket
• High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs
• Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class AB amplifier, Extruded aluminum heatsink stays cool even at high volumes, 150mV – 5V Variable Input Level, 12dB Low Pass Crossover Frequency 50Hz-250Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote
• Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ 8 Gauge Translucent Blue Super Flex Power Cables, 17’ 18 Gauge Blue Remote Cable, 17’ 16 Gauge Clear Speaker Wire, 3’ 8 Gauge Super Flex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7’ Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

User questions & answers

Question:	Does it fit a 2000 Honda Civic
Answer:	In the trunk all day long
Question:	Will this enclosure fit under the back seat of a 07 tundra double cab
Answer:	It should fit. I'm ordering one for my 07 tundra
Question:	Will this fir under the back seat of a 2001 F150 supercrew
Answer:	Measure how much room you have under the seat. Dimensions of the speaker are on the listing. It’s pretty slim
Question:	Will it find under the backseat of my avalanche
Answer:	IF it does It WILL quit working as mine did and Rockville knows they have a defective remote system in these units from CHI(NA

Product features

Rockville RWS12CA Slim 1200 Watt 12" Powered Car Subwoofer Enclosure + Wire Kit

Description of RWS12CA:

Rockville has developed and perfected a smart, integrated solution for adding bass to any vehicle’s audio system. The Rockville slim powered subwoofer combine subwoofers with matching enclosures and amplifiers for optimal bass performance.

Utilizing a slim but heavy-duty subwoofer, durable enclosure and mono block amplifier designed and engineered to work as a complete system resulting in intense bass response. Featuring a quick-connect Molex high level input with Smart Turn-On Circuitry, the unit easily integrates in to any OEM system with minimal of wiring. Power, signal and remote turn-on are achieved via molded angled terminals for easy access allowing for simple set-up or removal.

The Rockville unit comes standard with a remote bass control, adjustable low-pass crossover, variable +12dB bass boost, and 150mv to 5 Volt gain control. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit.

Slim-profile, these loaded enclosures are perfect for car trunks and for behind or under pickup-truck seats that hug the back of the cab. Available in three subwoofer sizes these units will fit in any tight area. The units are the smallest sub boxes designed by Rockville, but don’t let their small size fool you, they are ready to explode with high power - super intense bass and extraordinary SPL levels. Rockville has produced a true high-performance completely integrate active/amplified woofer system – in a compact footprint.

By taking all the ground-breaking technology from the Rockville shallow-mount T3 subwoofers producing real, head-pounding bass, combined with a tough Rockville carpeted MDF box enclosure and Rockville class leading mono block amplifier these diminutive enclosure are perfect for placement anywhere in any vehicle. So save space in your trunk or hatch with the Rockville all-in-one drop-in bass solution and still have plenty of hauling space.

Product description

This Package Includes: 1 x Pyramid 1200 Watt Loaded Subwoofer Enclosure (2 12" Subwoofers) 1 x 1100 Watt Monoblock Amplifier 1 x 8 Gauge Wiring Kit The **Pyramid BNPS122** 12" dual car audio subwoofers with bandpass enclosue features a MAX power handling of 1200 watts at 4 ohm. This subwoofer includes a built in neon ascent lighting, specially treated black rubber edge suspension and bandpass alignment for extra deep bass. The front window is made out of plexi glass and the subwoofers have a silver polypropylene cone and 4 tuned ports. The **Boss AR1500M** MONO class a/b amplifier features a MAX power of 1500 watts and a RMS power of 700 watts at 4 ohm. Other features include a MOSFET power supply, class A/B circuitry, 2 ohm stable and a low pass crossover. Also, includes a remote bass control. The BOSS AR1500M amplifier is the perfect amp to power your car audio system! ![alt text][1] [1]: https://www.vminnovations.com/sys/resource.ashx?guid=6088617e844b4420a69def16beba86bb

• SUBWOOFER: The Pyramid BNPS122 12" dual car audio subwooofers with a built in neon accent lighting, specially treated black rubber edge suspension, and bandpass alignment for extra deep bass.
• MONO CAR AMPLIFIER: The Boss AR1500M MONO class a/b amplifier features a MAX power of 1500 watts and a RMS power of 700 watts at 4 ohm
• AMPLIFIER KIT: This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car.
• SUBWOOFER BOX & SPECIFICATIONS: Plexi Glass Front Window; Frequency Response: 35Hz 1K Hz; 4 Ohm Impedance
• DIMENSIONS: 6.5" W x 2.625" H x 11 11/32"L

User questions & answers

Question:	Will it fit a 2005 mustang
Answer:	Says Thailand on the zabuton
Question:	Will this fit In a 00 Chevy Impala
Answer:	Two pieces—mat and cushion.
Question:	Are these speakers worth buying
Answer:	Vacuum or dryclean.
Question:	Will this fit in back of a Dodge journey with 3rd row seating
Answer:	You can’t fold it. You must roll it like a yoga mat. This slides nicely under my bed. I don’t carry it anywhere. I love the cushiony feel when I meditate. It’s quality material.

• Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
• Rockville dB13 3000 Watt/1500w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 750 Watts x 1 Channel <1% THD+N. 4 Ohm: 450 Watts x 1 Channel <1% THD+N.
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1500 Watts x 1 Channel. 4 Ohm: 900 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 3000 Watts x 1 Channel. 4 Ohm: 1800 Watts x 1 Channel.
• High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
• RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 80 Amp Maxi Fuse. Dimensions: (W x H x L) 9? x 2.4? x 14.7?.

User questions & answers

Question:	Should i run 2 of power acoustik gw3-10 10" dual 2 ω 1000w rms subwoofer's on the rockville db15 6000 watt/3000w rms mono class d 2 ohm amplifier
Answer:	Those subs probably have a real RMS rated of 500w or less. This amp will be fine for them. It puts out a CEA rated 1500w, so you're over powering them, but if you set your gain properly, you'll be fine. I drive a pair of 600w RMS 18s and they just get warm on this amp.
Question:	Can i use this amp for a 12 rockford fosgate p
Answer:	Yes
Question:	will this make 2 2000watt 10inch boss subs hit
Answer:	Depending on the rms this model has 1000rms you need to check how much rms both of those subs have together.
Question:	Will this amp be able to my two 12inch alpine type r
Answer:	It powers my type r 12 with ease and sounds nice doing it gain is up about half way, but Right nw the amp lights are dimming down on hard bass hits. I think I need to check n clean grounds and possibly upgrade to 100% copper 0 gauge power and ground wires. This amp is well worth the money, make sure you have your subs wired for 2ohms

Product features

Rockville dB13 3000 Watt Peak/750w CEA rated RMS Mono 2 Ohm Amplifier Car Amp

Description:

The dB13 is a mono amplifier with 3,000 watts peak output and 750 watts CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc. One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB13 features a Maxi fuse with a rating of 80 Amps. Although we rate these conservatively at 750 watts CEA @ 2 ohms, this amplifier puts out more power than this! This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise. The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class. Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production, and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and inspect 20% of all the production items. We test the power, the controls, and over 20 other tests.

Product description

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered tube. Growing up one of my best friends bought a car and it had a powered tube in it. The sound that it produced was just amazing and I will never forget it. Tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.



As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the tube and you are ready to enjoy the most incredible bass you have ever heard.

• Rockville RTB12A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote. 600 Watts Peak/300 Watts RMS.
• 12“ High power woofer in vented tubular enclosure. Integrated, built-in 300 Watts RMS Rated amplifier.
• Rear aero vent bass system. Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 111 dB.
• Adjustable bass crossover. Dashboard adjustable bass remote control. Molded steel woofer grill.
• Four steel mounting brackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 12.75” x 22.83“.
• Rockville RTB12A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote. 600 Watts Peak/300 Watts RMS.
• Rear aero vent bass system. Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 111 dB.

User questions & answers

Question:	Why can’t I return this item ,it was wrong one
Answer:	Ask the seller, there customer service isn't the best
Question:	Is it waterproof
Answer:	I really don't think so.
Question:	Anyone know the cubic/ft volume of the tube itself
Answer:	600 watts
Question:	Why does it say 500 watts on the subwoofer? But you say 600 watts
Answer:	It's neither. Your lucky if you get 200 watts out of it but depends on which input you use and the radios output. I opened mind to see what the audio chips looks like and they are only rated at 150 to 200 watts max.

Product features

Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.

Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.

Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.

'Good things do come in small packages' Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.

Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.

• Rockville RTB10A 10“ 500w Powered Subwoofer Bass Enclosure With Bass Remote. 500 Watts Peak/250 Watts RMS. 10“ High power woofer in vented tubular enclosure. Integrated, built-in 250 Watts RMS Rated amplifier. Rear aero vent bass system
• Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 108 db. Adjustable bass crossover. Dashboard adjustable bass remote control
• Molded steel woofer grill. Four steel mounting jackets + two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 10. 75” x 20. 86“

User questions & answers

Question:	Can i connect this to my Rockville rpg 10 inch bluetooth house speaker
Answer:	Hello customer, thank you for the question, our banTamp tube amp series is designed for electric guitar only, we are also dedicated in producing the bass line for this kind of product, please keep on watching our AITONE store. The combo version in our store is MA-10B, a mini practice amp, just for practice at home but not tube. Please consider twice before place order. Thank you!
Question:	Are these marine grade
Answer:	I think it would probably work with the clean channel but it might not best the best thing. Maybe try an amp made for acoustic guitar. I think it would also depend on the type of pickups your guitar has and if you want it to sound more like an electric guitar. There are products like this: Donner Multi Effect Pedal Chain Alpha Acoustic 3 Guitar Effect Modes Acoustic Preamp, Chorus and Hall Reverb https://www.amazon.com/Donner-Effect-Acoustic-Guitar-Preamp/dp/B07KHVQDBJ/ref=sr_1_13_sspa?keywords=sonicake+for+acoustic&qid=1580694674&sr=8-13-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExOUlGN1JGNEJNNlE1JmVuY3J5cHRlZElkPUEwNTI3NDIxMlJBOVdBT1ZEMklTOCZlbmNyeXB0ZWRBZElkPUEwMDk3MzE1S1dWS0FWRFdMOVVVJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== I've never tried this myself and you would still need an amp but if you are just recording you could go direct from it I'm sure.
Question:	It looks like it comes with a plug for a quick disconnect. Is it a full quick disconnect or is stuff hardwired into the unit itself
Answer:	Hello customer, This is just amplifier head with no speaker, you need to connect a cabinet to run it, thank you!
Question:	So it has the wiring also
Answer:	Do you know ORANGE amp? This is about this amp, it is a high gain, but if you would like high gain metal, we suggest our ZOMBIE to you, the Mesa Boogie sound, please refer to JOYO ZOMBIE or ZOMBIE XL, these two beasts would fit you better.

Product features

Rockville RTB10A 10" 500w Powered Subwoofer Bass Tube+Bass Remote + Amp Kit

Package Includes:

• Rockville RTB10A 10" 500w Powered Subwoofer Bass Tube + Bass Remote
• Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RTB10A



Introducing the Rockville RTB10A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB10A is a powerhouse. The compact package features a high power 10” woofer and 500-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.



"Good things do come in small packages" Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.



Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim…experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.



Features:

• Rockville RTB10A 10“ 500w Powered Subwoofer Bass Tube With Bass Remote
• 500 Watts Peak/250 Watts RMS
• 10“ High power woofer in vented tubular enclosure
• Integrated, built-in 250 Watts RMS Rated amplifier
• Rear aero vent bass system
• Speaker level and RCA line-level input
• Frequency response: 30Hz-200Hz
• Sensitivity: 108 dB
• Adjustable bass crossover
• Dashboard adjustable bass remote control
• Molded steel woofer grill
• Four steel mounting brackets + two canvas straps with Velcro fasteners
• Tube is covered in durable aviation grade tweed with embroidered logo
• Dimensions: 10.75” x 20.86“

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RWK10



The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!



Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing. The resistance per foot of this kit is extremely low compared to any other amp kit in its range. The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit. We were more shocked than anyone about these tests, because we used to sell some of those amp kits. (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes set of RCA cables.



Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• 17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

 

Product description

Father of the gods - Zeus delivers a full range of amplifiers to the mortal car audio enthusiasts of Earth. The Zeus line of amplifiers from Hedonics is a throw back to the original Hedonics amplifiers that helped start the car audio and SPL craze. These amplifiers are packed with technology for great sound and huge power. Complete lineup of super class A/B Multi-Channel amplifiers and class D mono amplifiers illuminated Hedonics badge old school Hedonics Heatsink for Superior heat dissipation military grade PCBSPC - Simpatico coil design - Hedonics Surface Mount design MOSFET power supply for Maximum current levels diagnostic indicators DC, short circuit, Thermal and overload Protection Low level RCA inputs and outputs classic Hifonics aluminum heatsink with a Zeus 3200 Watt, 1 ohm stable, Class D mono subwoofer car audio amplifier. Features include onboard electronic crossover and boost EQ. Bass remote included

• CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
• BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
• MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
• HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
• CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.

User questions & answers

Question:	I’m trying to push 3 12’s any help
Answer:	All depends on the specs of the 12’s. What ohms, and power ratings.
Question:	What’s the best amp to use to power 2 15s solo square subs
Answer:	A good one
Question:	Will this amp push 2 sundown 15 inchc CBX
Answer:	Not sure what the rms is on the subs you have but I'm running this amp at 2ohm pushing 2 skar vxf 15s. Running dual inputs on power and ground and it does a good job I beat on it daily with no issues
Question:	How much power does the hifonics 3200 watts require
Answer:	It requires 0 gauge wiring and reccomends a 250 amp inline fuse/circuit breaker. So it requires max of 250amps?

Product features

FATHER TO ALL THE GODS

ZEUS has been delivering incredibly powerful and very affordable car audio amplifiers to the mortal car audio enthusiasts of Earth for decades. The new ZEUS line of amplifiers from Hifonics still maintains that throwback look of the original Hifonics amplifiers but they are packed with technology for great sound and huge power. People used to have to spend a thousand dollars for an amplifier like this, now it is the most affordable way to get started in real high end car audio design.

Product description

BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control

• Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control
• Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz
• Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz
• Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees
• Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz
• Maximum Input Voltage 4.5 Volts, Maximum Output Voltage 9 Volts, S / N Ratio 110 dB, THD 0.010
• Dimensions: Depth 6.5” x Width 8.8” x Height 1.5”
• 1 Year Warranty

User questions & answers

Question:	How many volts are the outputs? I have 8v outputs and id rather use my amps built in crossovers if this is going to reduce the voltage
Answer:	I am not sure. But... I am using two of these to drive one 4 channel amp, two 2 channel amps and 2 monoblock amps. All of them are different brands and none of my crossover outputs nor my amplifier inputs are at max. So in conclusion, it/they have enough.
Question:	how many amps can work with this cross over
Answer:	You can control three amps with this cross over.
Question:	Can I used this together with an equilizer for better sound on my car
Answer:	Yes will sound great
Question:	so if i got Boss amps will i need a Boss crossover
Answer:	Not really unless you want to keep all the equipment the same.

Product description

Lanzar Model : VCT2010

800 WATTS 2 Channel High Power MOSFET Amplifier

400W x 2 Output at 4 Ohms

800W x 1 Bridged Output at 2 Ohms

2 Ohm Stable

MOSFET Power Supply

Variable Hi-Pass : 40 Hz-250 Hz

Variable Low-Pass : 40 Hz-250 Hz

Variable Input Level (Gain) Control : 6V-200mV

Bass Boost Switch:0-18dB

Thermal / Overload / Short Circuit Protection

Soft Turn On/Off

Power & Protection LED Indicator

Low Level RCA Input : 10K Ohms

Line Level RCA Output

Frequency Response : 15 Hz-30K Hz

Signal to Noise Ratio: >95dB

THD:0.1 %

2x20 Amp Maxi Type Fuse

Slim Size Amplifier Design For Easy Installation

Dimensions: 10.63''W x 1.78''H x 7.48''L

The Lanzar 800 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 400W RMS / 800W MAX POWER: The Lanzar 800 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 400W x 2 output at 4 ohms or 800W x 1 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63''W x 1.78''H x 7.48''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	will this amplifier push my 1000 watt Kenwood
Answer:	Not sure what you mean. I had 2 10 p3s 2000 watt amp. Box handled great
Question:	Will this amplifier power   2) kicker 10c124 12" 600w 4omh
Answer:	Hello and thank you for the question The kicker CVR 124 has a morning death of 5 3/4 inches The a152-12CP comes with a mommy depth of 7 1/4 inches so it should fit without any issues Please let me know if we need to help you any further and thanks again
Question:	What's the rms watts per chanel at 2 ohms
Answer:	It fits my 2002 2500
Question:	What this class amplifier (AB, B, C, D
Answer:	They sure should

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

Small Compact 4.75″ wide chassis. 2-Ohm stable class d monoblocks. Mosfet pwm power supply. 50-250Hz variable 12Db LP Crossover. 10-50Hz variable 12Db subsonic Crossover. High Level Input.

• 1500-Watt max power, 600-Watt RMS at 4-ohm, 900-Watt RMS at 2-ohm
• 2-Ohm stable class D Monoblocks
• MOSFET PWM power supply

User questions & answers

Question:	Will this amp take 4 gauge wire
Answer:	Yea. This lil thing has power
Question:	Do you need a capacitor using this amp with one sub
Answer:	This amp with a single sub, you should not need a capacitor.
Question:	Is this 1ohm Capable
Answer:	No. The RZ1-3500D is 1-Ohm stable
Question:	Will this amp sound better than my JL 500 slash amp on my w7 series
Answer:	NO. If you read my review below, it puts out less than 300 watts RMS. This amp Is a scam, I don't know how Amazon even allows it to be sold.

Product description

Remote Bass Control for use with MTX THUNDER AND WET series amplifiers

• Package Dimensions: 13.462 cms (L) x 9.144 cms (W) x 1.777 cms (H)
• Package Quantity: 1
• Product Type: Remote Control
• Country Of Origin: China

User questions & answers

Question:	I see some reviews say it's "backwards"... But does the min/max match up to which way your turn the knob or is that incorrect as well
Answer:	Yea its backwards. Counter clockwise for more bass, clockwise to lower bass. But you can just un-screw it and adjust it.
Question:	Can you tell me the exact measurements of the length of the cable, as I have a very large sedan
Answer:	Don't know exact, I drive a dodge neon and I had a good 8-10 ft extra it's plenty long
Question:	will this work with all amps
Answer:	No.. Absolutely not.. It may work on other amplifier brands as long as they accept the 3.5 jack. But the knob has a resistance value that was designed to work with the MTX brand.
Question:	How long is the cable
Answer:	Didn't really measure it, but it's long enough to run to the back of most sedans. about the same length of a set of rca patch cable in an amp kit. So maybe around 16'