8 best pyramid 2 channel amps

Product description

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Bridgeable

Delivers two channels or bridge mono for subwoofers. The PB171X cranks out 2 x 50 watts RMS at 4 ohms and is 2-ohm stereo stable for 75 watts x 2.

Selectable Crossover Modes

The built-in crossover can be set to full for normal full-range systems, or low-pass/high-pass for delivering specific frequencies to components or subwoofers. Low-pass and high-pass frequency controls are provided for setting the crossover frequencies.

Input Versatility

The PB717X includes both high-level and low-level inputs, so you're covered with the various types of car stereos. The high-level inputs take direct speaker wire leads, while the low-level use RCA plugs.

To further match the amplifier to your receiver/head unit, a variable input level control is provided to dial in the perfect setting without distortion.

Bass Boost

Subwoofer fans rejoice: The PB717X features a bass boost of up to 18 dB, for added rumble.

MOSFET Power

The MOSFET pulse width modulated power supply helps provide excellent sound quality, minimal distortion, and efficient power handling.

Comprehensive Protection

High-performance audio requires a lot of power, and things can get hot quickly. Like any solid car amplifier, the PB717X features protective circuits. Overload and thermal indicators let you know they've activated and shut off the amp. In the event of a short circuit, power protection is provided in the form of easily replaceable fuses.

PB717X Specs

What's in the Box

Pyramid PB717X power amplifier and user's manual.

• 1000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1000W bridgeable output. Features variable subwoofer crossover, variable gain control and high level low impedance MOLEX input connector
• SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio
• DISTORTION-FREE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you w/ crisp and clear audio for an outstanding music experience
• THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
• SLIM SIZE DESIGN: This box amp's small size makes installation a breeze, you'll have no trouble finding a spot for this little yet powerful device. Additional features include LED indicators, RCA low level inputs and automotive type fuse protection
• Included Components: 1 Pyramid Branded Product

User questions & answers

Question:	can this push 1 15inch kicker cvr alone
Answer:	It is DC powered. It is easily powered off a vehicle / boat battery. The included power adapter converts AC to 12v DC.
Question:	Why is this amp rated 1000w? When it shows 50x2 or bridged 75w x2? Either way im not seeing more than 150w
Answer:	No !! It does not come with a remote...
Question:	i am lost, i am looking to power just two 6 inch, 120 watt .4 ohm wakeboard speakers in my jeep, i don't need thumping, just good sound for a jeep, a
Answer:	Hi, unfortunately no. You cannot boost or add wattage to this unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PFA330BT for more details. Thank you.
Question:	Im only using this amp to power 1000w door speakers. Can i bridge the remote output wire to the 12v connection on amp instead of battery connection
Answer:	No. You are better off using a mono block amp

Product features

2 Channel Car Stereo Amplifier

• Two Channel Bridgeable Amplification, Tri-way Configuration:1/ 2 Channels
• 2 x 50 Watts Total Output 4 Ohms, 1000 Watts Total System Output 4 Ohms
• Variable Gain Control, MOSFET Pulse Width Modulated Power Supply
• Built-In Variable Subwoofer Crossover, High Level Low Impedance MOLEX Input Connector
• RCA Low Level Inputs, Speaker Output Terminal Strip
• Signal/Noise Ratio: 90dB, THD Less Than 0.04%
• Frequency Response: 15-30kHz, Overload Protection
• Thermal Protection, Short Circuit Protection
• Power On LED Indicator, LED Diagnostic Condition Indicator
• Automotive Type Fuse Protection

Product description

The **Pyramid PB715X** 2 channel car amplifier features a MAX power handling of 1000 watts and a RMS power handling of 500 watts at 4 ohms. The MOSFET power supply electronically varies the width of a channel along which charge carriers flow. MOSFET has higher switching speed than other transistors which make it great for power amplifiers. Other features include a built in variable subwoofer crossover and a variable gain control. Overload Protection Thermal Protection Short Circuit Protection

• New Pyramid PB715X 1000W 2 Channel Car Amplifier
• Two Channel Bridgeable Amplification
• Tri way Configuration:1/2 Channels
• Certified Refurbished: This is a Refurbished product that may have minor cosmetic imperfections. Includes extended 90-day return window

User questions & answers

Question:	I have 2 12" 1200 watt mtx terminators subs. will this amp do good with them
Answer:	Yes but you might have to bridge them...I have the same amp for 2 15" 2500watt and I'm not using any where near the full potential of the amp
Question:	how to bridge
Answer:	I don't have it bridged..when I did it always blew my fuse once a week..I had to run separate seperate wire to each subwoofer
Question:	is this a good amp
Answer:	really god honest truth ive been waiting and waiting for it to come and when it arrived i was so happy,i open the box liked how it looked and it was heavy,i hooked the amp up an got nothing,im kinda profissional ive been using all kind of amps for years,but i hooked it up and got no sound but the green light was on but nothing,i opened the amp to look in the inside an it was blown,so i got the legacy 3000 watt amp but it runs hot in 15 minutes,so i brought a fan an put in the bottem,all i can say about the legacy is that mother beats so hard,but i brought the pyramid amp used,my freind said it beats hard but i never heard it and its not to much quality in the inside but the legacy beats hard after i put the fan in!!!
Question:	will this amp power 2 1100 watt 10 inch pioneer subs
Answer:	Yes

Product description

This Package Includes: 1 x Pyramid 2000 Watt Amplifier 1 x Wiring Kit The Pyramid PB918 2 channel car amplifier features a MAX power handling of 1000 watts at 2 channels or bridged into 1 channel at 2000 watts. Other features include a Fully Adjustable Electronic Crossovers, Variable Gain Control, Heavy Duty Aluminum Alloy Heat sink and a High Level Molex Input. 2×1000W Max Output 1×2000W Watts 2 Bridged Bridgeable into 4 Ohms **We are an authorized Pyramid dealer**

• **Amplifier:**
• New Pyramid PB918 1000 Watt 2 Channel Car Amplifier
• 2 Channel Amplification
• 2×1000W Max Output
• 1×2000W Watts 2 Bridged

User questions & answers

Question:	How many wayts rms
Answer:	Maximum load capacity 300 LBS.
Question:	is this amp 1 ohm stable
Answer:	it is easy to assemble, about 30mins

Product description

Two Channel idgeable Amplification Tri-way Configuration:1/2 Channels 2 X 500 Watts Total Output @ 4 Ohms 1000 Watts Total System Output @ 4 Ohms Variable Gain Control MOSFET Pulse Width Modulated Power Supply 2 Ohm Stereo Stable Built-In Variable Subwoofer Crossover High Level Low Impedance MOLEX Input Connector RCA Low Level Inputs Speaker Output Terminal Strip Signal/Noise Ratio 90dB THD Less Than 0.04% Frequency Response:15Hz-30kHz Overload Protection Thermal Protection Short Circuit Protection Power On LED Indicator LED Diagnostic Condition Indicator Automotive Type Fuse Protection Dimensions: 7.28-Inch L 9.45'W 2.09-Inch H

• Receiver has BD - DVD - CD player and FM Tuner
• Connections - HDMI Out - 1; Video Out - 1; Digital Input - 2 (optical); Audio Input - 1 AUX (Stereo Mini Jack, 3.5mm)
• Speaker System - Front Configuration - 2-way 3-speaker, Bass-reflex Woofer - 1-3/8 x 4 Cone Type x2
• Pure Direct Sound Speaker - Yes (front, center)
• Advanced Bamboo Cone - Yes (front, center) Approximate Dimensions -

User questions & answers

Question:	will it run a 12" kicker comp 4ohm
Answer:	No honestly its not a real good amp for subwoofers but good for mids and hi
Question:	Will this support line level input
Answer:	No it barely fit in the truck of a Honda civic
Question:	will it run a 12" kicker comp 4ohm? my setup is not working and idk whats wrong
Answer:	Yes it should, I have mine in the trunk of my Hyndai Elantra. And still have some space, Best to mount the amp to the back of the seat using small screws.
Question:	Can I get a 120 volt converter for this amplifier
Answer:	I'm not sure it fit in my 96 sunfire

Product description

Behind every Blaupunkt product is over 90 years of innovation and excellence, and the AMP7502 2-Channel, Full-Range Amplifier embodies just that. With an optimized 160W RMS and 750W output, you can give your audio system the perfect boost in sound. Its slim design fits perfectly into any trunk, so you can easily hook it up to your stereo system.

Amplifier Class: AB

No. of channel: 2/1 Channel

Dimensions: 11.8" x 7.5" x 2.1"

Max. Output Power: 750W x 2

RMS Power (4 Ohms): 160W x 2

RMS Power (2 Ohms): 325W x 2

Frequency Response: 10Hz - 45Hz

Signal-to-Noise Ratio: =>90dB

Voltage Supply: 11 - 16V DC

Gain Adjust: 150mV-6V

Total Harmonic Distortion: <=0.05 percent

RCA Input: 2-Channel

Crossover Frequency: 50Hz - 400Hz

Crossover Slope (dB/oct): 8-10dB/oct

Fuse: 30A x 1

• 750 watt maximum power full-range amplifier
• Amplifier Class: AB
• No. of channel: 2/1 Channel
• Max. Output Power: 750W x 2

User questions & answers

Question:	Is it compatable with 1200 watt alphasonik 10" subwoofer
Answer:	Yes, & that sub isn't "REALLY" 1,200 watts, bridged this amp, with the gains maxed, could prob blow that sub's voice coils with some hip-hop.
Question:	I ordered a amp1501 single channel to put 2 6x9 subs on in my harley, will this give me the bass i need to make them thump
Answer:	It should ,its not enough for my 1100 watt 10" but should drive the 6x9s
Question:	Can i hook up 4 speakers to this amp
Answer:	Yes you could but I recommend getting a 4 channel amplifier which blaupunkt has and you can find it here on Amazon.
Question:	Will this power a couple rockville 600 rms watt each 12" subs in a sealed box
Answer:	No, it's only rated at 750 watts which means it will only support one 600w sub. You will need one blaupunkt 750w amp for each sub woofer.

Product features

AMP7502

Get amped up for the AMP7502 and take your car to the next level.

Technical Data

Amplifier Class: AB, No of channel: 2/1 Channel, Max. Output Power: 750W x 2, RMS Power (4 Ohms): 160W x 2, RMS Power (2 Ohms): 325W x 2, Frequency Response: 10Hz - 45Hz, Signal-To- Noise Ratio:=>90dB, Voltage Supply: 11 - 16V DC, Gain Adjust: 150mV-6V, Total Harmonic Distortion: <=0.05%, RCA Input: 2 Channel, Crossover Frenquency: 50Hz - 400Hz, Crossover Slope (dB/oct): 8-10dB/oct, Fuse: 30A x 1, Dimension: 11.8 x 7.5 x 2.1in.

• Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
• Rockville dB25 2800Watt/1400Watt RMS Class AB 2 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 350 Watts x 2 Channel <1% THD+N . 4 Ohm: 230 Watts x 2 Channel <1% THD+N. 4 Ohm: Bridged: 700 Watts x 1 Channel.
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm: 700 Watts x 2 Channel. 4 Ohm: 460 Watts x 2 Channel. 4 Ohm:Bridged: 1400 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 1400 Watts x 1 Channel. 4 Ohm 920 Watts x 1 Channel. 4 Ohm:Bridged: 2800 Watts x 1 Channel.
• High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 60Hz -1.2KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer.
• Mute and Delay Soft Start System. RCA Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Frequency Response: 10Hz - 100KHz. Damping Factor: >100 @ 100Hz. 30 Amp x3ATC Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 19.4˝.

User questions & answers

Question:	I am looking to hook this amp to 2x6.5" 320w kenwood front speakers and 600w rear 6x9's. Will this amp work for those speakers and what 2ohm sub
Answer:	I currently have this hooked to almost what you have 2 6.5 and 2 6x9 along with a 4 ohm sub.. it works great, very clean with plenty of sound and plenty left as I have the gain turned down. I dont think you will be disappointed in this amp
Question:	Would this amp be good for 6 speakers i wanna use it for highs
Answer:	This amp is terrific for miss and highs being a class A/B amp, however your gonna be a channel short but I'm sure there is a wiring diagram through crutchfield you could use to figure something out
Question:	With this 5 channel amp , can I hook up my highs , tweeters & subwoofers at the same time
Answer:	That's the whole point of a five channel amp.
Question:	Are these 0gauge inputs or 4gaude
Answer:	4 I believe, 4 fit perfect in my sons car.
Question:	Will it push six or eight ds18 6.5 mids 4ohms
Answer:	No. Around 200 watts max per channel.
Question:	Does it have remote booste
Answer:	Yes
Question:	Does it have a remote bass knob
Answer:	No it has a switch with 3 settings. 0-6-12 best I remember so no in-betweens it was off or zero, 6 db, or 12 db.
Question:	Will this amp pull a lot from my car battery
Answer:	Around 40 amps max. I used a HP 460W HE 12V hotplg AC power supply to run this amp with two 10" subs at work and it never cut off. That power supply is rated 38.3 amps max and it powered the amp/subs 16 plus hours a day sometimes 6 days a week.

Product features

Rockville dB25 2800 Watt Peak 1400 Watt RMS 2 Channel Car Amplifier, Extremely Loud!!

• Rockville dB25 2800Watt/1400Watt RMS Class AB 2 Ohm Car Stereo Amplifier With Optical Coupler Technology
• CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc) - 2 Ohm: 350 Watts x 2 Channel <1% THD+N - 4 Ohm: 230 Watts x 2 Channel <1% THD+N - 4 Ohm: Bridged: 700 Watts x 1 Channel
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc) - 2 Ohm: 700 Watts x 2 Channel - 4 Ohm: 460 Watts x 2 Channel - 4 Ohm:Bridged: 1400 Watts x 1 Channel
• Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song - 2 Ohm: 1400 Watts x 1 Channel - 4 Ohm 920 Watts x 1 Channel - 4 Ohm:Bridged: 2800 Watts x 1 Channel
• High-Speed MOSFET Power Supply
• Under Voltage Protection at 10V
• Over Voltage Protection at 16V
• Tertiary Supplies Circuitry
• Studio-Grade Bipolar Output Stage Transistors

Product description

Maximum Power Output 4 x 1000W - Bridgeable RMS Power @ 4 Ohms: 2 x 2000W - 4 Channel Bridgeable MOSFET Amplifier - Frequency Response 20 Hz-50kHz (±3dB) - Output Power @ 14.4v DC, 50Hz - 2 Ohm Stable - MOSFET Power Supply - PWM ( Pulse-Width-Modulation ) System - Glass Epoxy PCB - Silver RCA Inputs - Custom Terminal Block for Speaker Connection - Thermal / Overload / Short Circuit Protection - Input Impedance: 47K Ohms - Soft Turn On/ Off - Advanced Protection Circuitry - S/N Ratio: >90dB - Dimensions:10.24"W x 2.21"H x 17.72"L

From the Manufacturer

• 4000 WATT POWER: The Pyle 4 Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable electronic crossover network
• SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio
• MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience. Also features pulse width modulation system
• THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
• SLIM SIZE DESIGN: This box amp's small size makes installation a breeze, you'll have no trouble finding a spot for this little yet powerful device. Additional features include LED indicators, RCA output, soft turn-on circuit, glass epoxy PCB and more

User questions & answers

Question:	i havee 2 subwoofer 1000watt each one 2coil can i bridge 2 channels to get 1000 watts 1 nd bridge the one too
Answer:	I’m sorry, I can’t tell you. My jar arrived in a flimsy envelope, broken and leaking.
Question:	Can this amp power the 2 power acoustik mofos-12d4 12" dual 4 ω 1200w rms subwoofer
Answer:	I know that the ones that have Bacon listed in the name of the product (Hot Pepper Berry Bacon Jam for example) do list bacon in the ingredients. So, if Bacon is not in the name or in the list of ingredients it seems like you would be safe to assume no bacon.
Question:	Can I run this amp on 2 2000w pioneer champion series pro subs
Answer:	It has a 'Best By' date not a expiration. Of course that date will change when we order more, but for now that is the, "Apple Maple Bacon Jam," has a 'Best By' date of 05/23/21. Thank for showing an interest in our products, please do let us know if we can answer any more questions. Thank you
Question:	What guage of wire should I use with this amp
Answer:	Not open but could have popped in transit?

Product description

Drive up your music vibes with the Planet Audio Anarchy AC1200.4 4-Channel  Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 1200 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low Pass Crossover, Fixed High Pass Crossover and Bass Boost. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC1200.4.



For more product details, please scroll down.

• 1200 W MAX Power, 4 Channel 225 W X 4 RMS @ 2 ohm 113 W X 4 RMS @ 4 ohm 450 W X 2 RMS Bridged @ 4 ohm
• Full Range Class A/B, MOSFET Power Supply
• High and Low Level Inputs
• Fixed High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost.6 Year Platinum Dealer Warranty
• Frequency Response:20 Hz to 20 kHz ±1 dB

User questions & answers

Question:	Would this amp push 4 eminence alpha 6a? these are 100w rms at 8ohms. how should i connect it
Answer:	Yes it can but it has room for more power. 3200 watt total. Even if that amp was 2000 rms it still could handle more power
Question:	Can I connect 4x 2-ohm speakers to each channel, then connect 2x 4-ohm subs bridged on 1&2, and
Answer:	You can find grills for just about any sub but Skar does not make grills
Question:	Will this amp push 6 door speakers in my Kia Optima
Answer:	Yes break in your subs at a low power for several hours before you attempt to throw full power at them if you don't break them in just right then the dependability and the durability goes out the window. I learned that the hard way with some really expensive JL's. And I just got some scar audio stuff myself and love it but I'm not sure if my amp works with my sub either so I'm just going to break it in and then C after that and the someone here can help me
Question:	Will this amp be good for 6 6x9's
Answer:	If you’re running a single sub then a dual two will give you a one ohm load when wired in parallel and if you’re running a pair of subs the dual 4 version will give you a One ohm load wired in parallel.