11 best kicker amplifier

• Efficient Class-D amplifier
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies
• Variable 12dB crossovers provides control to dial in perfect sound
• 24dB subsonic filter for protection from potentially damaging frequencies

User questions & answers

Question:	Is this amp good for. Two 15 inch solo barrick kickers
Answer:	I would say yes
Question:	Can thiis amp handle 2 kicker cvrs 15inch
Answer:	If the fuel line has same fuel line coupling then yes >I can only say it worked on my F150 very well
Question:	Will this work for 3 10inch kicker rt at 1ohm
Answer:	This product fits 3/8” & 5/16” fuel lines. I bought this tool specifically for a 2006 F-350. If you add your vehicle to the Amazon garage, it should give you product that fit your vehicle.
Question:	Would this amp be perfect paired with the solo baric L7 12" single sub @2ohm 750 rms 1500 peak
Answer:	It's a set there should be no problem

Product features

CX Amplifiers

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility, and true reliability!

Control It

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

One Ohm Stable

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

Towers of Power

CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!

Incredible Sound Everywhere

KICKER’s CX-Series amplifier technology provides clean, powerful music in nearly any vehicle on the road today, without changing your radio or adding a line-out converter. These powerful amps work with as little as nine volts of power from your battery and as much as 40 volts (400 watts) of speaker-level input signal. With KICKER’s FIT+ (Fail-safe Integration Technology-PLUS), you get outstanding noise rejection - even with premium factory audio systems.

• Mono Car Amplifier
• 4 ohms: 600 watts x 1 chan
• 2 ohms: 1200 watts x 1 chan
• 1 ohms: 1200 watts x 1 chan
• Optional Bass Remote

User questions & answers

Question:	Does this amp require an extra battery
Answer:	Yes, it comes with 2, which will be used to connect your computers to the KVM. Your monitors should have come with 2 HDMI cables that can be used to connect the KVM to the monitor. (Any HDMI 2.0 cables will work fine. The cables are not proprietary.)
Question:	Does it come with Kicker bass remote
Answer:	Have you gone into MacOS and set the options to extend the screens? If you need help, open a ticket on our BuyTESmart website. We have a 24 hour maximum response time (usually same day though).
Question:	Would this amp push. 2 Kicker L
Answer:	Yes it will.
Question:	Is this a good amp for my kicker dual 12’s? Should I go with more power or less
Answer:	I returned mine because it didn’t work

Product description

Get the most out of your sound with the Kicker CX400.1 Amplifier for Car Audio Speakers. CX-Series Mono Amps are ohm stable, giving you even more power and wiring options for your system. A powerful 12 dB crossover and 24 dB subsonic filter are included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. CX.1 Amplifiers accept up to 40 volts of speaker-level input signal. This kind of flexibility makes line-out converters unnecessary and optimizes your sound quality.

• CX-Series Mono is an efficient Class-D amplifier for your car
• Features a three-second on/off delay to eliminate unwanted interference
• Variable 12 dB crossovers let you control the dial to optimize your sound
• KickEQ 6 dB variable bass boost for any low frequencies you run into
• 24 dB subsonic protects the speaker from any potentially damaging frequencies

User questions & answers

Question:	does this have auto shut off when key is turned off? does it allow for high level (speaker) input
Answer:	Probably not your best bet. I had it on my 12w7 Jl at 3ohms and it was striving for more power. Hifonics don’t make amps like they use to. I recommend a JP23 @ $299 from down4soundshop.
Question:	Will this amp run 2- 12" kicker compvr 4 ohm
Answer:	You sure you got a good signal with rcas got mine hooked up on two zxi 12s and my terrain is flexing hard afraid my back hatch gonna blow off
Question:	I would like to use this amp in a single channel full range application. Can the crossover be disabled or set out of range
Answer:	Absolutely
Question:	What’s the wattage for 2ohms and 4ohms
Answer:	Most definitely

Product description

125-Watt 2-Channel Full-Range Car Amplifier

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	Can I use this amp for a kicker comp 10” sub
Answer:	It does for my LG with bluetooth
Question:	Will this run a single 2ohm sub in bridged mode
Answer:	The one i bought did.
Question:	Can I do a 1 ohm load on this
Answer:	Yes they do hold the answer button on the right hand side until it says power off
Question:	Can this amp be used for tweeters and mid speakers
Answer:	Turn off the light by pressing the button for 2 seconds.

• The R2-500X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power
• Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 75 Watts x 4 @ 4Ω OR 155 Watts x 4 @ 2Ω OR 250 Watts x 2 @ 4Ω Bridged/Mono)
• Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass
• Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Can I run this as a 3 channel amp? 75w x 1 @ 4Ohm and 250w x 1 @ 4Ohm
Answer:	Yes, it’ll work great in 3 channel mode. Just be sure that you’re bridging into a single 4 ohm load. Feel free to send us a direct message or text/call our experts at 323-231-3525 with any questions
Question:	ohm stable
Answer:	Yes. It produces (conservatively) 250 watts RMS x 2 @ 2 ohms. Thanks for your interest in Rockford Fosgate!
Question:	Is this amp waterproof? Want it for a Polaris Slingshot
Answer:	No, the R2 series of amplifiers are not Element ready and should not be exposed to the elements. Here are our Element ready series of amplifiers: https://www.amazon.com/stores/page/BBFD70CE-A64C-417A-909C-76317E1A2400?ingress=2&visitId=e69d8aab-5221-4837-8268-78465b0496a6&ref_=ast_bln Thanks for your interest in Rockford Fosgate!
Question:	This amp states this on the information (250 watts x 2 @ 4ω bridged/mono). can connect to bridge/mono with 4ohm thats converted to 2ohm
Answer:	Yes, running 4 ohm bridged will be the same power as 2 ohm per channel. Thanks for your interest in Rockford Fosgate!

Product features

Primed For Performance!

The Prime R2-500X4 is a full-range class-D 4-channel amplifier, capable of operating at 4Ω or 2Ω stereo, and 4Ω bridged/mono and rocking 500 Watts of RMS power. This amplifier is extremely efficient because of its class D technology, which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings and the unique P.O.W.E.R. supply continues to generate more than the rated power as the voltage increases.

The Prime Series was developed for car audio fanatics that want a reliable amplifier that won’t break the bank – with all the power and performance you’ve come to expect from Rockford Fosgate.

Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems.

Variable On-Board Punch EQ

The Integrated Punch EQ corrects the acoustic deficiencies in the listening environment, by delivering up to 3X the bass via equalization.

Product description

This item is Factory Certified Refurbished

Features

• Efficient Class-D amplifier - 1 Ohm Stable
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQΓ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look

Specifications

• Power Handling:
  • 300 Watts x 1 @ 2 Ohm RMS
  • 600 Watts x 1 @ 2 Ohm PEAK
  • 400 Watts x 1 @ 1 Ohm RMS
  • 800 Watts x 1 @ 1 Ohm PEAK
• Frequency Response: 25Hz - 200Hz
• Signal to Noise Ratio: 95dB
• Input Sensitivity:
  • High level 250mV-10V
  • Low level 125mV-5V
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
• Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
• Bass Remote Compatible: CXRC (Not Included)
• Dimensions: 8-1/8" Length x 2-3/8" Height x 7-3/16" Width

• Factory Refurbished by Kicker - 1 Year Warranty

User questions & answers

Question:	Will this amp work good on a pair of jl w3s
Answer:	The only ones that do anything (that I can tell) are the ones labeled 1/A, 2/B, 3/C, and 4/D (to select which computer is active). The rest don't make a beep or seem to do anything. No manual that I could tell. Also, it will come WITHOUT a battery for the remote, AND without telling you what kind of battery! It's a CR2025. I happily had some laying around.
Question:	Will this amp work and power this sub to its full potential ?rockford fosgate punch p3s-1x12 p3s single 12" shallow loaded en
Answer:	Hello. Thanks for your question. Our KVM can support most of the mouse and keyboard on the market. It works with Logitech wireless mouse and keyboard, but the mouse and keyboard must be common basic mouse&keyboard, because it can not support special mouse&keyboard keys, all KVM Switches with Hot Keys function on the market can not solve this special key compatibility issue, because it involves extra drives. MK550 is ergonomic keyboard, our KVM Switch USB keyborad port can not support its multimedia buttons, its mouse forward and backward buttons on the side may not be supported. We have considered this situation, so we add extra USB 2.0 port on our KVM Switch, you can use the USB 2.0 port to solve this incompatibility issue, the only problem is you will can use its Hot Keys function. I hope my answer is useful to you. If you have other questions, please tell us. Thank you again.
Question:	Does the amp with the bass knob
Answer:	Each monitor needs to be connected to a dedicated monitor port on your computer. Those monitor ports can be on the same video card or split among multiple video cards. So if you have a single video card, check if it can connect to multiple monitors simultaneously. EG: your video card may have multiple hdmi ports, but even if it has a mix of different port types like displayport or dvi, you can get inexpensive adapters to convert them all to hdmi. If you only have one port, then you can either get another video card or add one via usb. One of my laptop has only one hdmi port and I simply got a usb-to-hdmi adapter to add another hdmi port. Obviously a usb video display would not perform as well as a real video card, especially for anything involving 3d. I think technically you can use this device if one of your computers only supports one monitor but obviously when you switch to that computer, only one monitor will show output.
Question:	Will this amp work good with a kicker 46tl7t122 tl7t
Answer:	The signal passes through the kvm. The monitor determines whether it sees signal to be on or on standby. If the kvm is set to route the signal from a computer that is not outputting signal, the monitor will see no signal and go into power saving/ standby mode.

Product description

This item is Factory Certified Refurbished

Features

• Efficient Class-D amplifier - 1 Ohm Stable
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQΓ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look

Specifications

• Power Handling:
  • 600 Watts x 1 @ 2 Ohm RMS
  • 1200 Watts x 1 @ 2 Ohm PEAK
  • 800 Watts x 1 @ 1 Ohm RMS
  • 1600 Watts x 1 @ 1 Ohm PEAK
• Frequency Response: 25Hz - 200Hz
• Signal to Noise Ratio: 95dB
• Input Sensitivity:
  • High level 250mV-10V
  • Low level 125mV-5V
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
• Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
• Bass Remote Compatible: CXRC (Not Included)
• Dimensions: 8-1/8" Length x 2-3/8" Height x 7-3/16" Width

• Factory Refurbished by Kicker - 1 Year Warranty

Product description

Specifications

• Power Handling:
  • 1200 Watts x 1 @ 2 Ohm RMS
  • 2400 Watts x 1 @ 2 Ohm PEAK
  • 1200 Watts x 1 @ 1 Ohm RMS
  • 2400 Watts x 1 @ 1 Ohm PEAK
• Frequency Response: 25Hz - 200Hz
• Input Sensitivity:
  • High level 250mV-10V
  • Low level 125mV-5V
• Dimensions: 12" Length x 2-3/8" Height x 7-3/16" Width

Troubleshooting

- Ensure Ohm Load matches output of subwoofer

- Ensure no protection light is showing on the amplifier

- Check fuses to ensure no blown fuses

- Check Ground Wire connection

- Ensure wire gauge is large enough for power, check RCA cables.

- Check all wire connections to ensure no loose connections.

- If Sound is clipping

- Clipping sounds are generally due to an overtaxed amplifier. By not being able to provide enough power to the subwoofer.

- Burnt wires can also create a clipping sound, as well as a bad ground.

- If no sound is coming

- Try replacing the RCA cables

- Verify the head unit is turned on, and that output is working.

- Try a good speaker that isn't in your car, If still no sound then you may have a child mode setting on or faulty amp

- If Hissing or Distortion

- Test all speaker wires, or patch cables. Ensure they are not running along side any power/ground cables.

- Try higher quality cables with more shielding.

- Unplug speakers from the amp, if you are still hearing then you will need to check for a bad ground.

- This may also be a problem with a bad head unit.

- If Subwoofer sounds like air is escaping

- Ensure subwoofer is mounted properly

- Ensure that the ohm loads match

- Check all power ratings, the amplifier may be overpowering the subwoofer.

- If there is a rattle, check to ensure it is mounted properly and box is in good shape (no cracks or seal issues)

• Factory Refurbished by Kicker - 1 Year Warranty

User questions & answers

Question:	Of this push to 15" 1200 W 600 W rms subal forward
Answer:	do not know I use it on a badboy mower.
Question:	What gauge wire does it accept for Positive and Negative
Answer:	Look up "Oil filter cap socket" here on Amazon or any automotive or tool outlet (I got mine on the cheap at Walmart). There are a number of "universal" sockets that will adapt to the large and small filters. If you have to have the exact measurement between opposite flats, write back and I will provide them (or you could call Stens). I would send it now, however, I am not near my shop. Also, look here:https://www.google.com/webhp?sourceid=chrome-instant&rlz=1C1AVNG_enUS620US620&ion=1&espv=2&ie=UTF-8#q=size+of+filter+wrench+for+Stens+120-738+Transmission+Filter
Question:	Will this amp power 2 skar evl
Answer:	Hello, thanks for your question. You can connect that extra USB 2.0 port if it causes problems with special mouse buttons/media controls, but your mouse can not use mouse gesture to switch inputs. If is keyboard, you can use keybard hot key commands. If you have any other questions let me know. Thank you again.
Question:	Will dis amp power up 2 12 kicker crv
Answer:	Hello. Thanks for your questions. Yes, it with 5V power adapter an universal adapter (supporting 110-220v).

Product description

2400W Peak (1200W RMS) CX Series Monoblock Class D Subwoofer Car Amplifier

• Get clear, powerful sounds in your vehicle with the Kicker 1200 W Mono Amplifier
• RMS Power:
• 600 Watt x 1 channel @ 4 Ohm
• 1200 Watt x 1 channel @ 2 Ohm

User questions & answers

Question:	would 2 2ohm 400watt rms subs work good with this so 800watts rms total
Answer:	Could work, could kill your transaxles. Using the wrong oil will significantly reduce the life of your transaxles. You’ll have to look up the capatability or cross reference tables of the two oils to ensure you are using equivalent oil. For the price of oil, that hassle and risk may not be worth it.
Question:	Can this be used with a two 1 ohm speakers
Answer:	I don't see synthetic or the weight listed anywhere on the instructions,box or bottle so that's a no. I guess if they put the weight on there a certain percent of buyers would want something else. Non-synthetic is cheaper so why mention a negative. Big tent theory. I don't know anything about the Hustler.
Question:	Does it have cooling fan
Answer:	20w-50 conventional oil. hydro-gear does not recommend using synthetics on these hydros.
Question:	I have a set of dual comp r 10in subs. i'm wondering if this will power my subs with no overheating issues
Answer:	i know it fit a bad boy zt

Product description

General Features: 

•  Kicker KXA Series Class-D Monoblock Amplifier
•  Class-D 1-Ohm Stable Monoblock Amplifier 
•  RMS Power Rating: 
• o  4 ohms: 800 watts x 1 chan. 
• o  2 ohms: 1600 watts x 1 chan. 
• o  1 ohm: 1600 watts x 1 chan. 
•  Total power output: 1600 watts 
•  CEA-2006 Compliant Amplifier 
•  Wireless KXARC remote included to control gain, SHOCwave bass restoration, phase control and clip monitoring 
•  LED power (green) and protect (red) indicators 
•  Soft start turn-on 
•  Mono channel operation 
•  Speaker-level (high-level) inputs 
•  Preamp RCA outputs to daisy chain multiple amps 
•  3-way protection circuitry (thermal, overload, and speaker short protection) 
•  Dual speaker terminals simplify the hookup of multiple speakers 
•  Heavy duty aluminum alloy heat-sink 
•  Input sensitivity: 
• o High level: 250mV-10V 
•  Frequency Response: 10 - 160 Hz x 1 chan. 
•  Total Harmonic Distortion (THD): 1% 
•  Signal to Noise Ration: >95 dB 
•  Variable low-pass filter: 40 - 160 Hz, 24 dB/octave 
•  Subsonic filter: 10 - 80 Hz , 24 dB/octave 
•  Variable Bass Boost: 0 to +18 dB bass boost at 50 Hz 
•  External Fuse Rating: 150 A x 1 
•  1/0 gauge power and ground wiring is recommended for installation. 
•  Dimensions: 8-5/16"Wx 11-3/16"Lx 2-1/8"H
•  Authorized Internet Dealer
•  1-Year Manufacturer's Warranty 

• Mono Car Amplifier
• 4 ohms: 800 watts x 1 chan
• 2 ohms: 1600 watts x 1 chan
• Class D Power Plant
• 1-Ohm Stable

User questions & answers

Question:	How many watts for 1 ohm
Answer:	Neither.
Question:	Is this bridgable
Answer:	No, this will work for 2 or 4 ohm only
Question:	Is this amp 1.5 ohm stable ? if it is what’s the expected rms power out out
Answer:	Being a 2 channel amp, it would have to be one or the other, not both. Unless you are running coaxial speakers but it sounds like you’re running components. Just be sure to adjust the gain according to your speakers RMS wattage. You can do so with a volt meter
Question:	will this push 2 kicker l7s 15s? there 2 ohms each
Answer:	YES !!!!

Product description

• Class D Power Plant
• SHOCwave Bass Restoration Processor
• KXARC Wireless Remote Included
• Gain Control With Optimal Input Indicator
• Variable 24dB Subsonic Filter
• FIT2 (Fail-Safe Integration Technology) Circuitry
• Variable 24dB Crossover
• DSP-Controlled Preamp
• KickEQ 18dB Variable Bass Boost
• Audio Control Compartment With Cover
• Black Anodized Aluminum Chassis
• Top-Mounted Red LED Light Pipe
• Power Handling
• Frequency Response:
  • AMPS 1 - 2: 10Hz-20kHz
  • SUB: 10Hz-160Hz
• Signal-to-Noise Ratio: 95dB
• Input Sensitivity: 250mV-10V
• KickEQ Bass Boost: 0-18dB @ 40Hz, Center Frequency-20Hz-80Hz, Bandwidth 1-5
• Bass Remote: Inlcuded
• CEA Power Rating: 50W x 4 @ 4 ohms (10Hz-20,000Hz), 200W x 1 @ 4 ohms (40Hz-160Hz)
• Dimensions:
  • Length: 12-3/4"
  • Height: 2-1/8"
  • Width: 8-5/16"

• KICKER® KX amplifiers are as diverse as they are powerful. Five mono amplifiers and four multichannel amps put control and power at your fingertips. This KX 800-watt five channel amplifier is a full system in a single package. This amp also features FIT2™ (Fail-Safe Integration Technology) – giving you superior power, clarity and dependability with nearly any stock or aftermarket radio.This item is Certified Refurbished.
• SHOCwave Bass Restoration Processor
• KXARC Wireless Remote Included
• Gain Control With “Optimal Input” Indicator
• Variable 24dB Subsonic Filter

User questions & answers

Question:	Is this 2ohm stable
Answer:	don't really know I have a 2012 badboy ZT with a 27hp kohler engine and it worked perfect.Sorry can't be of more help.