11 best alpine 5 channel amplifiers

Product description

There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

Overview

Class-D Performance

PDX Technology Inside

Rotatable Illuminated Alpine Badge

Top-Side Control Panel

Voltage ON/OFF Sensing for OEM Upgrade

Built-in Crossover & Bass EQ

Remote Bass (RUX-KNOB) Compatible

Sound Quality

CEA-2006 Power Ratings

CEA-2006 Power Rating: 75W RMS x 4 + 250W RMS x 1 (4-ohm, 14.4V at Less Than 1% THD+N)

RMS Power Ratings

Per channel into 4 Ohms: 75W RMS x 4 + 250W RMS x 1 (14.4V at Less Than 1% THD+N)

Per channel into 2 Ohms: 100W RMS x 4 + 350W RMS x 1 (14.4V at Less Than 1% THD+N)

Bridged 4 Ohms: 200W RMS x 2 (CH-1/2/3/4, 14.4V at Less Than 1% THD+N)

Sound Tuning

Crossover Frequency (CH1/2/3/4, HPF): 50 Hz - 400 Hz, -12 dB/oct.

Crossover Frequency (Subwoofer, LPF): 50 Hz - 400 Hz, -24 dB/oct.

Subsonic Filter (Subwoofer): 8 Hz -40 Hz, -24dB/oct. (Variable)

BASS EQ (Subwoofer): 0 to +12 dB, fc=50Hz (Variable)

Dimensions

Foot Print (WxHxD) mm: 270 x 50.8 x 165 mm

Foot Print (WxHxD) in: 10-3/4" x 2" x 6-1/2"

General

Power Requirements: 14.4 V.DC (11-16V allowable)

Input Impedance: >10k ohms

Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 8 Hz - 45k Hz

Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 8 Hz - 400 Hz

THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02 %

THD+N (10W into 4 Ohms) for Subwoofer: 0.02 %

Damping Factor for CH-1/2/3/4: >500

Damping Factor for Subwoofer: >1000

Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 105 dB

Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110 dB

Weight: 2.76 kg/6lb 1.4oz

Input Sensitivity (RCA Input,CH-1/2/3/4): 0.2 - 4.0 V

Input Sensitivity (RCA Input, Subwoofer): 0.1 - 4.0 V

• PDR Series 5-Channel Class D Car Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 350 watts x 1 chan. Bridged | 4 ohms: 200 watts x 2 chan. + 350 watts. x 1 chan. | CEA-2006 compliant
• Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section | Variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel | Variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel | Variable bass boost (0-12 dB at 50 Hz) on sub channel
• Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input) | Class-D amplifier design | MOSFET power and output stages | Fuse rating: 40A x 2 | Dimensions: 10-3/4"W x 2"H x 6-1/2"D
• All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin
• PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally

User questions & answers

Question:	Will this power 2 5-way pioneer 6x9,2-8'mid-bass n 2 8- kicker flat subs. If not please help me
Answer:	This comforter is puffy; upon opening the package just fluff a bit.
Question:	Is Amazon part of Alpine's authorized dealer network
Answer:	This is light weight
Question:	Does this come with the bass knob? Listing seems to infer that
Answer:	Amazon doesn’t give the dimension for this one. I don’t see.
Question:	Can i bridge this to be a 3 channel amp? 2 channels plus the sub for the 3rd channel
Answer:	I have never had a problem with feathers coming out of the comforter.

Product description

1600W Max, 5-Channel PDX Series Car Amplifier

• Alpine PDX-V9 5 Channel Power Density Digital Amplifier
• CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1
• Stackable installation design with front-panel controls
• Quick-connect speaker connectors

User questions & answers

Question:	can you turn off the cross over
Answer:	Yes, all adjustments can be made by taking off the light panel strip. You can turn off the cross-overs to run channels 1-4. The sub channel is dedicated for lower frequencies.
Question:	is this amp vgood for compoments in front..ie tweeters 4/ 6.5component typeR/coaxial/typeR i 12 in sub
Answer:	Yes, I have been using this amp for several years now without any problems. This 5 channels amp is hooked up to 6.5 components in the front, 6.5 3-ways speakers in the rear, along with 10" inches closed kicker box. Very impressed so far with the system. Hope this might be a little help.
Question:	would this work well with 2x Apline type R 6 1/2 Coaxial front speakers, 2x 6x9 type R rear speakers, and 1 alpine Type R 12" sub
Answer:	It should work fine. I'm running 4 6.5 infinity kappa speakers and one 10" jlw7 and it sounds great.
Question:	Since Vius isn't an authorized seller, there is no warranty correct? I'm suspicious of the low price, but that's offset some by the positive reviews
Answer:	Correct, no warranty because they are not an authorized reseller. I purchased both of my PDX amps (F6 & M12) on amazon and then added a square trade warranty for a couple bucks. Saved hundreds. Planning to do the V9 for my wife's car.

Product description

Alpine S-A55V 5-Channel 60W RMS X 4 + 300W RMS X 1 at 2-Ohm S-Series Amplifier

• Features: 5-channel car amplifier,

User questions & answers

Question:	Can anyone tell me, does a set of 6.5 speaker w/tweeter & crossover count as 2 or 4 channel
Answer:	Just the handle
Question:	what is the power output (RMS) at 8ohms
Answer:	I don’t see anything on these spatulas or the Amazon site to show where they’re made. They are well made and sturdy, with a few things I do not like-the edge isn’t as thin as it might be and I found this made flipping things over a problem- I had to lift the edge with a fork to get the spatula under it. I also don’t like the tip of the handle is very flexible and rubbery, whet I would prefer it to be more firm.

Product description

Rubicon Nano 2000W Class D 5-CH Marine Amplifier. Military Grade SMT PCB Maintains Dynamic Performance. Direct Short, Thermal, & Overload Circuits Protect Amplifier. 200mV-6V Low Level RCA or High Level Signal Input. Quick Disconnect High Level Wire Harness Included. Easy DIY Install Single Sided Terminals & Controls. 4g Power In out Terminals & 12g Speaker Output Terminals. Variable 12dB High Pass, Low Pass, & Subsonic Crossovers. 12dB Bass Boost Increases Low Octave Harmonics.

• Rubicon Nano 2000W Class D 5-CH Marine amplifier
• High Efficiency Class D Full Range Amplifiers. 2-ohm Stereo & 4-ohm Bridged Class D Full Range
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 12dB Bass Boost Increases Low Octave Harmonics
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

User questions & answers

Question:	Would this power 8 6.5’s and one 10’ sub? So can you put 2 6.5’s on each of the 4 channels and run the sub on the 5th
Answer:	That's how I ran it
Question:	Can i use this for 4 12 in cutlass
Answer:	No, find a mono block amp and get more power
Question:	does it come with a corded sub controller level that plugs into the amp
Answer:	Yes it does. 4 ft foam cord with self adhesive 2 sided tape mount.
Question:	Is the sub channel 1 ohm stable
Answer:	No

Product description

General Features: Alpine X Series 5-Channel Car Amplifier Power Output @ 4 Ohms: 75 watts RMS x 4 + 300 watts RMS x 1 Power Output @ 2 Ohms: 100 watts RMS x 4 + 500 watts RMS x 1 Power Output @ 2 Ohms: 200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 Hi-Res Audio Compatible Wired Remote Bass Level Control Available, RUX-Knob.2 (Sold Seperatly) LED Power (Green) and Protect (Red) Indicators Soft Start Turn-On Speaker Level (High-Level) Inputs Dual Speaker Terminals to Simplify Hookup of Multiple Speakers Input Sensitivity: High Level- .5-10V Input Sensitviity: Low Level- .2-4V Frequency Response: 4 Channel- 10-60,000Hz Frequency Response: Sub Channel- 8-400Hz Total Harmonic Distortion (THD): 0.07% Signal-to-Noise Ratio: >105dB Variable High-Pass Filter: 50-400Hz, -24dB/Octave Variable Lowe Pass Filter: 50-400Hz, -24dB/Octave Subsonic Filter: 8-40Hz Variable Bass Boost: 0 to +12dB Bass Boost at 50Hz Fuse Rating: 30A x 3  1 Year Manufacture's Warranty Authorized Internet Retailer

• RMS Power Handling @ 2 Ohms: 100 Watts x 4 + 500 Watts x 1 RMS Power Handling @ 4 Ohms: 75 Watts x 4 + 300 Watts x 1
• Alpine ID Sound Quality, solving what’s missing in most car audio systems these days: great spatial imaging and depth of sound stage.
• Class-D Performance
• Built-in Crossover & Bass EQ
• Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible

User questions & answers

Question:	How many watts is this X serious 5 channel amp
Answer:	This amp puts out 75 Watts per each of the 4 main channels at 4 ohms and 500 Watts on the subwoofer channel if you can run it at 2 ohms. Feel free to call our friendly product support at 323-231-3525 for expert advice
Question:	How many speakers can I hook to this. I’m putting six alpine speakers in my truck. R series
Answer:	You can run 6 full range speakers and one or two subwoofers. We just need to make sure that your ohm loads match up correctly. Feel free to give us a call at 323-231-3525 for expert advice

Product description

Alpine R-Series 6-Channel Power Amplifier

• 6-channel car amplifier, 75 watts RMS x 4 + 150 watts RMS x 2 at 4 ohms, 100 watts RMS x 4 + 250 watts RMS x 2 at 2 ohms, 200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 bridged at 4 ohms
• GTO (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level input
• 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
• Staggered power amplifiers are perfect for a 3-way front-stage setup,and work great for a front/rear/sub stereo as well.

Product description

Drive up your music vibes with the Planet Audio Anarchy AC1800.5 5-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 1800 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC1800.5.



For more product details, please scroll down.

• Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	My receiver has 4 RCA outputs. Can I run the 4 RCA outputs into this amp and run 4 coaxial speakers plus a subwoofer
Answer:	Yes you can. There is a switch on the amp and it will take the sound from channels 3 and 4, and use it for the subwoofer.. so you dont need a 5th rca cable.
Question:	What is the RMS
Answer:	Taken from Google: RMS stands for root mean squared.You use RMS to tell you in part how loud the speakers are going to be, you also you its sensitivity rating.RMS also tells you the most amount of watts that you speaker can handle on a continuous basis. This is the figure you use when looking for an amplifier and powering the speaker.1000w RMS is a lot and i would be very skeptical buying any speaker that says it handles 1000w RMS, most companies that put out a speaker like that inflate their numbers by making the THD level higher so once you turn it up the signal is not clear. Also they will make it 1000w RMS but its sensitivity rating is very low such as under 80db/1w.i know i have two JL subs that are rated at 300 watts RMS each and the 600 watts it puts out is enough to make me go deaf.
Question:	I have a kicker 10" sub with 4 ohms, but when I hook it up to the amp I get absolutely no sound out of it. The first four channels are running fine
Answer:	There is a switch near the sub control on the amp.. direct or channel 3-4. If you do not have a sub input the switch should be set to 3-4. So it will get the sound from channels 3-4. . Hope this helped
Question:	Will this amp be suitable for 2 pairs of Pioneer TS-A6885R Speakers 350W (60W) nominal and TS-SWX251 Subwoofer Power(Nominal)800 W (200 W
Answer:	It is extremely important to understand Ohms law when choosing speakers. One answer on another question says it is not 2 Ohm stable. They wouldn't make the UL list if it didn't. The fifth channel is 1 channel that is 2 Ohm stable. It can handle 2 single voice coil subs wired in parralel which brings the Ohms down to 2 Ohms. I do not recommend DVC in a mono amp unless the amp is 1 Ohm Stable. If you got 2 DVC subs wired parralel would present a 1 Ohm load to your amp and blow it up.

Product description

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms

• 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm
• Accepts High Level & RCA Level Input; Remote PLC (Punch Level Control) - Sub Channel
• Cast aluminum heatsink with Top Mount Controls
• 12dB/octave crossover. MOSFET power supply
• 4 Gauge power/ground connectors. The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

User questions & answers

Question:	I see two high level inputs not three. if my stereo doesnt have any rca output how can i connect the subwoofer too
Answer:	It has a built in crossover, no need to worry about a sub-input.
Question:	Is the Rockford R600X5 a good choice for two sets of JBL speakers (5.25 component and 6x9) rated at 75w RMS each at 2ohm AND a Sub rated at 300w RSM
Answer:	According to their website, this would be a good choice of power for the speakers. 75wrms @ 2Ohm for each speaker and 300wrms @ 2 ohm for the sub. Make sure that the sub is 2Ohm, though. When you receive the amp it will come with a QC sheet explaining each power rating. Just make sure you tune it properly and it will work well. http://www.rockfordfosgate.com/products/details/r600x5
Question:	does it come with whatever wires you need
Answer:	You will need an amp install kit for the recommended gauge.
Question:	The remote for the sub comes stock with this? I don't need to order it separate like amazon is suggesting
Answer:	The base remote comes with this amp

Product features

Prime 600 Watt 5-Channel Amplifier

Overview:

The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

Technologies:

Class A/B

An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.

Class D

High efficiency amplifier design that reduces current consumption from the charging system.

Product description

Full range 4, 3 or 2 channel amplifier, 2 ohm stable, built in crossovers CLEAN D = High efficiency Full Range Class D with filtering of all inputs and outputs for clean performance throughout the passband and all the way to clipping. CLEAN D design also protects the vehicle’s sensitive electronic systems from EMI, the typical cause of check engine lights and other random bad behavior.

• 4 AWG Power and Ground connectors
• Extruded aluminum heatsinks
• Full MOSFET design
• CLEAN D

User questions & answers

Question:	Rms power
Answer:	Its very close to what it's rated at.
Question:	Where are the specs
Answer:	https://damoreengineering.com/collections/audio-amplifiers/products/e400-4
Question:	Can you guys load a spec sheet image, or link to manual .pdf
Answer:	All specs and manuals can be found at www.DamoreEngineering.com

Product description

1800W peak (760W RMS) Club Series 5-channel amplifier

• 45 watts RMS x 4 + 320 watts x 1 @ 4 ohms
• 65 watts RMS x 4 @ 2 ohms + 500 watts x 1
• 130 watts RMS bridged x 2 @ 4 ohm
• Total peak power: 1800 watts
• Slim chassis provides more flexible mounting options

User questions & answers

Question:	Does anybody know if the center panel can be flipped? I need to mount the amp to a wall and need the wires coming in the top
Answer:	It’s compatible in any 2din slot. You just have to buy the adapter kit at any Walmart.
Question:	Is amp recommend for... 2 pair kicker component 6.75 300w(100rms) and one sub rw10ca 800w(200rms
Answer:	I had to buy the istalation kit as well as the stereo
Question:	Would this be enough to run jbl gto (2) 6x9 (2) 4x6 and
Answer:	IDK the answer, I purchased as a gift for this past Christmas. They haven't installed it yet. I did see that you can control them with an app from your phone, as long as you are somewhere with a signal. Sorry I couldn't be more help.
Question:	can i use it in my utv
Answer:	Yes it does!

Product description

MB Quart NA2-320. 4 Compact Four Channel, 320 watt Powersports Amplifier

• Product Type: Car Audio Or Theater
• Package Dimensions: 8.6 L X 18 W X 24.1 H (Centimeters)
• Package Weight: 1.225 Kilograms
• Country Of Origin: China

User questions & answers

Question:	Will this need specual adapters to connect to a Ford
Answer:	I ran my rig for about 3 hours on one tank but it was not non-stop action
Question:	Will this plug directly into a rzr with ride command or do I need a wiring adaptor
Answer:	It stands about 3feet tall with the bit
Question:	Is there a wiring harness for the speakers? I want to connect 4 speakers to this amp and I didn't see a harness for the speakers
Answer:	Firecore FS18316 Hex Shank Scraping Chisel, 1-1/8" Chisel Hex for Electric Demolition Jack Hammer, 3" x 16" is the one that fit my stark - needs to have the top part that goes into hammer ROUND - take a close look at the tops
Question:	Is this amp bridgeable
Answer:	I would contact the manufacturer. Oem parts are always advised