9 best power acoustik amps for cars

Product description

The brand is dedicated to creating the finest pieces of mobile electronics that bring terrific value and suit to today’s busy lifestyles. For decades these guiding principles has remained unchanged. Power Acoustik stands at the modern-edge of the audio/video product evolution with an intense R&D as well as continuous improvement of its existing designs. Year in and year out, Power Acoustik creates more high-end mobile electronic products that offer a host of state-of-the-art features that supersede previous models, as well as your expectations. Out-of-the-box thinking, innovation in design and features are what sets Power Acoustik the head and shoulders above the rest.

• Class D Full Range Amplifier
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged
• MOSFET Power Supply with Audiophile Grade IR Transistors
• Military Grade SMT PCB
• Maintains Dynamic Performance

User questions & answers

Question:	Will this amp push 2 12"boss phantoms?1050 rms each sub
Answer:	1 but it pushes my 2 15 good
Question:	What gauge wire does this amp take
Answer:	Yeah but the wire they send you doenst plug into the amp
Question:	Is it bridgeable
Answer:	Most definitely. When this Amp is wired correctly, it's amazing. If your woofers are duel 4ohm, wire each one at 2ohms X 2 would be 1ohm =3500w. If they are single voice coil 4ohm, wired together is 2ohm. I'm pretty sure that's 2400w at 2ohms
Question:	Is it 1 ohm stable? The description only mentions 2 and 4 ohms
Answer:	4 gauge is the correct size and is also what is recommended in the owners manual.it states 4 gauge on page 7.

Product description

Small Compact 4.75″ wide chassis. 2 ohm stable class d monoblocks. Mosfet pwm power supply. 50-250Hz variable 12Db LP Crossover. 10-50Hz variable 12Db subsonic Crossover.

• 2300-Watt max power, 900-Watt RMS at 4-ohm, 1400-Watt RMS at 2-ohm
• 2 ohm stable class D Monoblocks
• MOSFET PWM power supply

User questions & answers

Question:	Can this amp push a kicker l
Answer:	It is 2 or 4ohm stable so your sub can be both. Depends on your VCs, load rating etc. But Kickers are nothing special so yes, no problem.
Question:	Is this a one channel or
Answer:	I used this amp for a while. It is still sitting in my garage. It is a one channel.
Question:	would this amp push a 2 ohm apline type r 15 which has a 750 watt rms
Answer:	Yes it will
Question:	What's the difference in a class D and a A/B amp
Answer:	From my experiences and what I heard class D amps don't heat up as much for instance this amp barely heats up my old class A/B would heat up and shut off alot where as this one has not done it once.

Product description

Small Compact 4.75″ wide chassis. 2-Ohm stable class d monoblocks. Mosfet pwm power supply. 50-250Hz variable 12Db LP Crossover. 10-50Hz variable 12Db subsonic Crossover. High Level Input.

• 1500-Watt max power, 600-Watt RMS at 4-ohm, 900-Watt RMS at 2-ohm
• 2-Ohm stable class D Monoblocks
• MOSFET PWM power supply

User questions & answers

Question:	Will this amp take 4 gauge wire
Answer:	Yea. This lil thing has power
Question:	Do you need a capacitor using this amp with one sub
Answer:	This amp with a single sub, you should not need a capacitor.
Question:	Is this 1ohm Capable
Answer:	No. The RZ1-3500D is 1-Ohm stable
Question:	Will this amp sound better than my JL 500 slash amp on my w7 series
Answer:	NO. If you read my review below, it puts out less than 300 watts RMS. This amp Is a scam, I don't know how Amazon even allows it to be sold.

Product description

The razor Series of amplifiers from Power Acoustik Pack huge amount of power into small chassis thanks to efficient full-range class d topology and smt technology. Complemented with every possible preamp adjustment, the razor amplifiers leave nothing to be desired! the Compact 4.75" wide chassis allows mounting in very small places where other amps just will not fit. The rz1‐3500d is a monoblock amp, with 3,500-watts Max. Rms at 4Ω is 900 Watts x 1. Overall dimensions are 1.63"H x 4.75"W x 12.25"D.

• Class D
• Small, Compact 4.75" chassis
• Mosfet PWM power supply

User questions & answers

Question:	Can this amp push 3 10' subs
Answer:	Yes
Question:	How many channels is this amp
Answer:	16 or 14 gauge should be good. Or whatever wire that can basically fit in the whole.
Question:	Does this amp come with a dash mount gain control module
Answer:	No it is not a 8k amp and it will push mofo 15s i have mine running on 2 mofo 122x. The amp will do roughly 1900 at 1ohm and maybe 1500 @2ohm this amp is similar to the soundstream Ar1-8000 google the dyno.
Question:	Is this amp can give me a blast out of my 2 15" lanzar subwoofer
Answer:	Yes

Product features

Power Acoustik RZ1-3500D 3500W Class D Monoblock Amplifier

The razor Series of amplifiers from Power Acoustik Pack huge amount of power into small chassis thanks to efficient full-range Class D Topology and SMT technology.

Complemented with every possible preamp adjustment, the razor amplifiers leave nothing to be desired! the Compact 4.75" wide chassis allows mounting in very small places where other amps just will not fit.

The rz1‐3500d is a monoblock amp, with 3,500-watts Max. RMS at 4Ω is 900 Watts x 1. Overall dimensions are 1.63"H x 4.75"W x 12.25"D.

Product description

Make your time on the water even more enjoyable with this razor marine Series class d amp from Power Acoustik. This 5-channel 2,500-Watt Max, 100w RMS x 4 + 400w RMS x 1 @ 4Ω amp uses a Compact 4.75" chassis design for installation versatility. The amp has splash-resistant conformal-coated circuit boards and MOSFET power supply with audiophile-grade irtm transistors. Military-grade smt PCB maintains Dynamic performance. Direct short, thermal & overload circuits protect the amp as well. This unit also has 200mv–6v low-level RCA inputs, high-level Input with auto turn on when it senses a signal, variable 12Db high-pass & low-pass crossovers and a 10hz–50hz variable 12Db subsonic Crossover protects subwoofers. Dimensions are 1.63"H x 4.75"W x 12.25"D.

• Class D amp
• Compact 4.75" chassis design for Installation versatility
• Splash-resistant conformal-coated circuit boards
• MOSFET power supply with audiophile-grade IRTM transistors

User questions & answers

Question:	How do i run all 5 channels with only 1 pair of rca's coming out of my bluetooth device
Answer:	Yes. Extremely high quality as little item.

Product description

Power Acoustik Vertigo car amplifiers are the next step in performance and value. Taking advantage of the improved efficiency Class D monoblock platforms, Vertigo amplifiers continue down the road of reliability and longevity you know well. This Vertigo Series 10,000 Watt Monoblock Class D Amp is ideal for adding 1 or more standalone subwoofers. Included with this 1 channel car amplifier is a remote gain control module for mounting on the dash.

• 1 ohm minimum impedance Class D monoblock operation
• 10,000 watts max power
• 1,200 watts RMS x 1 at 4 ohms
• 2,000 watts RMS x 1 at 2 ohms
• 3,500 watts RMS x1 at 1 ohm

User questions & answers

Question:	What guage wire do i need i just bought this amp
Answer:	It may show through! The fabric is very nice and smooth. I was going to put a navy comforter under but didn't even try. So I got a white one.
Question:	Why wont it let me choose a warranty plan
Answer:	Microfiber is polyester! Not the old time thick scratchy polyester. This is like soft cotton and is very durable and sleek! If you want to feel the fabric stop into Walmart, target, Penneys or Sears and check out their bedding department. Find one that say microfiber and touch it. I think you will be pleased. Of course amazon has better choices and prices.
Question:	What is the true rms on this amp
Answer:	Bright! The photo is pretty accurate!
Question:	do it have a built-in fan
Answer:	Yes, the reverse has a smaller, busier chevron design. It's nice to be able to change it up once in a while!

Product description

Description of RE1-1500D: Power Acoustik RE1-1500D 1500 Watt Mono Amplifier Car Audio Amp

• Features of RE1-1500D: Power Acoustik RE1-1500D 1500 Watt Mono Car Amplifier, Monoblock (1 Channel) Full Range Operation 2-Ohm Stable Class A/B Amplifier, MAX Power: 1500 Watts, 4 Ohm RMS: 375 Watts, 2 Ohm RMS: 750 Watts, Direct Short, Thermal, & Overload Circuits Protection
• 200mV-6V High Level or Low Level RCA Input, Variable 12dB High, Low, & Subsonic Crossovers, 12dB Bass Boost Increases Low Octave Harmonics, Direct Wire 4ga. Power & 12ga Speaker Terminals, Dash Mounted Remote Gain Control, Product Dimensions (L x W x H): 9" x 8.5" x 2.2" inches

User questions & answers

Question:	Why is this item labeled 1500D if it is not a class D amp? Or is it
Answer:	I think because its so new, there are no reviews either. I bought 2 of the 6000 for installs I was so pleased with quality I ordered the 10000d and I was more surprised it has 0 gauge power and ground everything I could find said 4 gauge. this amp is heavy duty 4 times as many capacitors than the 6000d and those haven't even got warm yet. one is pushing 2 600 rms 12s audiobahns and it slams, the other 3 planet audio 10s custom box pounds and clean sound for under 100 bucks a pop and the 10000d was 180. so ya no its not 6000 or 10000 watts but that 6000d by look of the guts is maybe 1000rms at least just a guess for it to not get hot so u n d c l e an a n d u n d e r a h u n d o o y e a . s o r r y i
Question:	What sizes fuses does it take
Answer:	RMS POWER @4 OHMS 1X1200 RMS POWER @2 OHMS 1X1200 RMS POWER @1 OHMS 1×3500
Question:	Would this amps rms at 2 ohms be too much to run on a single power acoustik gw
Answer:	No, this a power amp, you need speakers that are a high rms or you will blow your subs

Product description

For those who want the most out their car audio system, quality sound processing is a must. After some slight adjustments, your system can sound like it has been tuned by audio professionals! Power Acoustik Razor DSP amplifiers offer similar sound processing options by including the functions of a Digital Sound Processor. Adjusting the DSP is easy, using an intuitive user interface. Connection to the DSP module is possible via USB connection to personal computers, or by the Razor DSP app available for Android and iOS mobile devices. Unlock the best from any system with this Razor Series 2,500 Watt 5 Channel Class D Amp with DSP and Bluetooth!

• High efficiency full range amp with 56-bit digital audio processor powered by Analog Devices
• Compact 4.75 in. chassis design for installation versatility
• Audio tuning with user-friendly Razor DSP user interface with response display
• works with either free Razor DSP app for iOS or Android devices or USB connection to personal computer
• Selectable ACC or signal sense turn-on

User questions & answers

Question:	i downloaded the app in the play store but when connecting to the amp via bluetooth it tells me that i need an app to connect to it. how do u rectify
Answer:	I started out with the usb cable and my laptop first, then i downloaded the app and had no problems linking up to amp. Not sure if you have to do that first or not, but that way worked for me
Question:	Speaker high level input
Answer:	On my app my wire for my base knob plugs into the amp wire broke no signal how do I purchase another one?????

Product description

Power Acoustik CB1-8000D 8000W Class D Amplifier

• Direct Short, Thermal, & Overload Circuit Protection
• High/Speaker Level & Low Level/RCA Input
• Variable 12dB High & Low Pass Crossovers
• Package weight: 42.3 lbs

User questions & answers

Question:	Can they push 2 15 8000 wattts
Answer:	Wire them series/parallel at 4ohms to the bridged/mono connections 500 watts x 1 shared, those Boss subs can take a lot, but 500 is enough to create some respectable bass, and your enclosure is ported, 500 is plenty, and the 2ohms may be louder at low volumes, but 4ohms has more of a quality/clean sound, but you could always go 250x2 at 2ohms parallel with stereo sound, if you need wiring help search "dvc subwoofer wiring options" and pick one you like.
Question:	will this amp push a single 12inch mofo thats wired up to 4ohm and sound good
Answer:	Your sub is too big for the amp. I have generic 10inch sub rated at 1000 watts, speaker blew the amp in a couple of weeks. Spend more for a better amp.
Question:	What wire gauge front speakers terminals
Answer:	I'm think the it's fine for two ten inch
Question:	Will it push 2 mofo 15 that's 2ohm? Is this amp a true 8k or what's the max
Answer:	I use all of ports at once, but I only drive short distances. It charges, but I can't guage how fast it charges. It performs well on short distances.