9 best pioneer class d amplifiers

Product description

GM Digital Series Class D Monoblock Amplifier w/ Wired Bass Boost Remote RMS Power Rating: 4 ohms: 500 watts x 1 chan. 2 ohms: 800 watts x 1 chan. 1 ohm: 1200 watts x 1 chan. Max power output: 2400 watts x 1 chan. Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on Mono channel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals Variable low-pass filter (40-240 Hz, 24 dB/octave) CEA-2006 compliant amplifier Frequency response: 10-240 Hz

• RMS Power Rating: 4 ohms: 500 watts x 1 chan. / 2 ohms: 800 watts x 1 chan. / 1 ohm: 1200 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals
• Variable low-pass filter (40-240 Hz, 24 dB/octave) / Frequency response: 10-240 Hz / Dimensions: 12-3/8"W x 7-7/8"D x 2-3/8"H

User questions & answers

Question:	Would this amp work for my 2 10" kicker comp rt subwoofers they are 1ohm 400rms each 800 watts
Answer:	No
Question:	Would this work for 2 12 inche kicker comps and the subs are 2ohm
Answer:	Works fine for my two 10 inch Rockford Fosgate subs.
Question:	Would it work with 2 fronts 2 rear and 1 sub
Answer:	I have the pioneer 1000watt that works good with my terminator 12s.
Question:	What the bass knob that comes with it? I lost mine and want to buy another one
Answer:	Micro USB either on a charger or the computer. Fast charging and long lasting charge.

Product features

Sleek Design

Although your amp is likely to be concealed in your vehicle, Pioneer Electronics has done a phenomenal job in the design and look of this extremely powerful yet small and compact amplifier.

Closer Look

This is a closer look at the channels and inputs the Pioneer GM-D9701 amplifier provides.

Bass Knob

A Bass knob is provided for added control of your bass from the convenience of your driver seat, or anywhere in the vehicle you'd like!

Product description

An amplifier shouldn’t take up too much space, especially in your car. The GM-D8704 might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output. Pioneer’s new extra-efficient Class-D digital amplifiers mark a dramatic improvement in power output capability, yet are 50% smaller than the current GM-Series Class-AB amplifiers. That makes them more versatile in terms of installation as well as performance. To prevent circuit shutdown, Pioneer’s new digital amplifier circuit “Protection Control System” senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to a system. For extra flexibility, variable LPF and HPF make audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The GM-D8704 LPF and HPF are adjustable from 40 Hz to 500 Hz. What, you DON’T own a Pioneer head unit? Well, we won’t hold it against you. In fact we’ll even help you build onto your system. The GM-D8704’s speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle.

• 1, 200 Watts Max Power
• Compact Design for Versatile Installation Options
• Refined Class FD Design Offers Extreme Efficiency and High-Quality Sound

User questions & answers

Question:	Can I use the rca to connect another amp to this one? Since it says bridged
Answer:	At least 4 gauge. The amp does about 900 watts at 2 ohms.
Question:	Ok with some vibration
Answer:	Prime is the low quality version. Id say this one is better.
Question:	What is the exact RMS @ 4ohms
Answer:	Same amp but the champion is the older version
Question:	Will this push 2 planet audio 1800 watt
Answer:	If you bridge the amp to a using two channels, I think this would do you fine.

Product description

Pioneer GM-D9701 2400 Watts Class-D Mono Amplifier with Wired Bass Boost Remote + Wire Kit

• 2,400 Watts Max Power At 4 Ohms
• Class-D Amplifier Design
• Compact Design For Versatile Installation Options
• Wired Bass Boost Remote And Variable Bass Control
• Include a 0 gauge amplifier kit + Phone Magnet Holder
• Low Pass Slope (dB/octave): -12dB

User questions & answers

Question:	Will this power three kicker 12 in subwoofers in a box
Answer:	I would contact Pioneer Tech Service and ask them. They are easy to reach and knowledgeable.
Question:	Es para bass y para speakers
Answer:	Yes you can. I'm running mine's with a pioneer stereo and speakers and it sounds really good and clear. but you can install it to your factory stereo system. Just have to splice it in between your speaker wires and and its will give your factory stereo a pretty good boost of bass and tweeter sound. its sound really good with my setup. and I'm running 300watts per channel. good amp
Question:	How well will this amp pair up with two 12" Pioneer Ts-swx3002 1200w max 400w rms at 4ohms Subs
Answer:	I have a 1989 e34 and I have mine sitting behind the console dash so I’m pretty sure it’s what the amazon page says
Question:	So this amplifier has windows 10 an 16 G of ram
Answer:	Sorry, no

Product description

Class D 1-Channel Marine Mono Amplifier

• mono marine subwoofer amplifier
• 300 watts RMS x 1 at 4 ohms 500 watts RMS x 1 at 2 ohms 800 watts RMS x 1 at 1 ohm
• CTA-2006 compliant frequency response: 10-240 Hz variable low-pass filter (40-240 Hz, 12 dB/octave) selectable subsonic filter (30 Hz, 24 dB/octave)
• conformal coated circuit boards rubber covers protect side panel controls, RCA terminals, and fuses preamp and speaker-level inputs wiring and hardware not included with amplifier 4-gauge power and ground leads recommended fuse rating: 40A x 2
• dimensions: 9-7/8"W x 2-3/8"H x 8-1/2"D

• Mono subwoofer amplifier
• 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
• Class D amp design
• Speaker-level inputs with signal Sensing turn-on
• Variable low-pass filter (50-200 Hz at 24 dB per octave)

User questions & answers

Question:	Can this amp power 3 alpine w10s4 subwoofers
Answer:	The digital channels 30-1, 30-2, 30-3 and above are technically on the same broadcast channel. In the antenna world, the broadcast channel is not necessarily the same as the number that shows up on your TV.In Detroit, where we are 4.1 is NBC and the sub-channels 4.2 and 4.3 come along with it. However it is broadcast on a channel VHF 7 in our area. You can use websites like antennapoint.com to find out the broadcast channel, which is often referred to as an RF channel or REAL channel. This device was designed after the digital transition, and is fully capable of finding and fine tuning.
Question:	im having a hard time findin a nice amp for my (2)15" kicker 2-ohm 1200w subs. i got acheap pyle 2000 watt amp and its not pushin nearly what i want
Answer:	basily the pickup ability
Question:	Will this power 4 Kenwood 5 way 6x9 speakers
Answer:	The HD7694P measures 65" long.
Question:	When setting the gain on my amp, do I set bass knob remote included all the way up or all the way down? (Not talking about the bass boost on the amp
Answer:	This wall plate amplifier provides amplified antenna signal to 2 TV sets. It does not provide 12V DC to the antenna. The 12V DC to the wall plate amplifier provides power to the amplifier and to the 12V DC socket on the plate as a convenience to power 12V DC items. The signal from the antenna is amplified to improve reception for 2 TV sets. In a typical RV installation with more than 2 TV outlets, one output from the amplifier is fed to a signal splitter in order to fed the extra outlets. That splitter may be installed inside the wall behind the wall plate amplifier. If the amplifier is turned off the amplifier switches to the cable source if connected, but does not amplify the cable signal. Here is a link to the manual. http://www.winegard.com/kbase/uploads/2451489.pdf

Product features

Kenwood KAC-9106D - Reliable performer

Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.

CEA-2006 Compliant:

CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

Connections:

Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.

Speaker Outputs: There are two pair of 0.335" wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Controls:

Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-9106D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.

Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

Product description

Get the compact stability and great sound of the Planet Audio Pulse PL3000.1D Monoblock Class D  Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to give your music a boost. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Phase Control. Tweak the levels with the Remote Subwoofer Control. For double the performance and power, strap on another PL3000.1D for a total power of 6000 Watts @2-Ohms. When space is limited but your passion for great sound is not, Pulse Amplifiers with blue illuminated end panel strips and logo, are just what the doctor ordered to power up your music and get your heartbeat racing. Drive your tunes with the Planet Audio PL3000.1D.



For further product details, please scroll down.

• Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
• Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
• 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
• Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
• Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	Will this amp blow my 2 10" rockville 2400w 1000rms
Answer:	The light is not blue. It is a traditional night light glow. More yellow. It. At also depend on if you put in a colored bulb.
Question:	Will this amp be good for 2 pioneer subs
Answer:	Buy buy baby or the skip hop website
Question:	I have 2 6.5s nemesis 500rms each. Does this will work
Answer:	Yes
Question:	Will this workon 2 VM audio 1500watt 10s
Answer:	The top most center button is the sound, the one right below it is the light.

Product features

Class D

Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Strapping Capability

Strap two amplifiers together to get double the power at an impedance of 2-Ohms.

1 Ohm Stable

1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic Filter

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Variable Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Low Level Inputs

Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.

Product description

700 Watts x 1 RMS @ 4 Ohms Mono.

1000 Watts x 1 RMS @ 2 Ohms Mono.

1500 Watts x 1 RMS @ 1 Ohm Mono.

3000 Watts Max Power.

1 x 90A Maxi Fuse.

Remote bass knob.

Class D 1 Ohm Stable.



Variable 50-400Hz 12dB Low Pass Crossover.

Variable 17-50Hz 12dB Subsonic Crossover.

Variable 0-18dB 50Hz Bass Boost.

Variable 0 degree ~ 180 degree Phase Shift.

THD: <0.05%.

Frequency Response: 15-500Hz.

Signal-to-Noise Ratiio: 105dB.

Input Sensitivity: 200mV-6V.

Dimensions: 7.5"W x 2"H x 11"L

• 700 Watts x 1 RMS @ 4 Ohms Mono.
• 1000 Watts x 1 RMS @ 2 Ohms Mono. 1500 Watts x 1 RMS @ 1 Ohm Mono
• CROSSOVERS & BASS BOOST: Variable Crossovers and Bass Boosting Ensures Flexible Operation.
• 105dB SENSITIVITY: Picks Up The Highs and Lows For Faithful Sound Reproduction.
• REMOTE BASS CONTROL: Mount It Under The Dash or Anywhere Within Reach For Fast Bass Adjustments.

User questions & answers

Question:	What is the power wire gauge for this
Answer:	I used 4 gauge power wire
Question:	v X 90a only draws 1300 watts then you factor in the 65-75% efficiency and that's a 1000w amp
Answer:	Its strong enuff to push 2 harmony audio carbon series 10s i do know that . . That said im sure all amp manufacturers stretch the truth a bit here and there . Definetly products in car audio on amazon do . Anyway im satisfied with this amp and as long as my ststem sounds good and it keeps pushin my 10s the way it is i can look over some wattage exaggeration.
Question:	do this amp have 4 gauge inputs like the 5000 watts
Answer:	I have 4 Gauge running to mine .
Question:	Will this push a audiopipe bdc4 15 4stack 1400w
Answer:	I got one that's pushing to audiopipe 10s almost out the box so yes it will push a 15 just make sure you have the correct box size for the speaker. To get the best sound out of your 15 .
Question:	Will this amp push to JL audio subs
Answer:	Yes depending on which varient and size of JL you are asking about.
Question:	Can I run 2 18in Rockville subs on this amp
Answer:	Yes, amp is da truth
Question:	What gauge terminals should I use
Answer:	4 gauge
Question:	Does this amp work with bmw and honda head units with balanced differential line signal? like jl and kicker amps
Answer:	Yes since it doesn't have RCA outputs you'll have to use an adapter and adjust the gain levels accordingly. for the prices amp is hard to be punished it for months and it still begging for more.

Product description

Pioneer GM-A3702 2-Channel Bridgeable Amplifier , Black/red. Low-Pass Crossover Frequency = 80 hertz.

• 500 Watts Max Power
• Automatic signal sensing and Turn-On
• Hi-Volt input level control
• Balanced isolator input circuit

User questions & answers

Question:	Will this work for (2) 10 inch rocford fosgate subs
Answer:	They are over the ear they are very comfortable.This Bluetooth headphones are equipped with Upgraded Soft Ear Cushions, which not only make it much more durability and comfort, but also make customers enjoy this high-quality.Value for money！
Question:	using an ipod nano as the input to this amp, will it turn on automatically and will it function properly
Answer:	Yes, you can. I bought a blutooth adapter it came with a usb connection and i all i needed to do was buy a ananlog wire plug it into my samsung and then once the transmitter connects to the headphones your good to go.
Question:	Will this work for two 8in pioneer shallow mount subs
Answer:	Good. These are not expensive headphones, so they good for the price.
Question:	What amp would be best for mtx terminator
Answer:	Yes, it can be used by a child.

Product features

Pioneer GM-A3702 2-Channel Bridgeable Amplifier ,Black/red

Technology of the GM Series

From dramatic distinction to dramatic design, Pioneer's new GM-Series amplifiers are thrillers in every sense, pushing the limits of flexibility and functionality.

Growing Power, Shrinking Size

New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient size for flexibility of installation in various car cabins.

Automatic Signal Sensing and Turn-On

Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.

Product description

400-Watt Monoblock Class D Amp

• 500W RMS x 1 @ 4Ω
• 800W RMS x 1 @ 2ω
• 1 200W RMS x 1 @ 1ω
• Free rasp 10hz–240khz
• Signal-to-noise ratio 100dB

User questions & answers

Question:	Do I need a line output converter if I have a stock head unit that does not have rca plug ins
Answer:	The “nominal” rms output @ 4 ohms x 4 is 60 watts. Here’s a link to the info. I had to Google it to remember. https://www.pioneerelectronics.com/PUSA/Car/Amplifiers/GM+Series/GM-A6704
Question:	What power cable should I use for this amp how many watts
Answer:	This is a 4 channel amp which runs speakers . For a sub you’ll need a mono amp or a 5 channel amp that’ll run a sub and speakers
Question:	Is this amp better than the Rockford prime
Answer:	Yes, regular car speakers are 4 ohms. According to Pioneer this amp is 2 ohm stable. So can easily up to 8 speakers with this amp. Each would receive 62.5 watts rms, and 125 watts peak. Pioneer specs below. Maximum Power Output at 2 Ω 250W x 4
Question:	What’s different from champion series
Answer:	Yes just make sure they're not ran at .5 ohm, look up the Crutchfield guide on running subwoofers. I have 3 10" pioneer subs 4 ohm each on this amp running at 1.3 ohms. Not even using half gain. More then enough power