13 best vm audio car amplifiers
VM Audio is a brand that specializes in car audio equipment, including car amplifiers. Car amplifiers are devices designed to increase the power of audio signals to drive speakers or subwoofers, resulting in improved sound quality and volume in a car audio system.Here's some information about VM Audio car amplifiers:
Amplifier Types: VM Audio offers a range of car amplifiers, including mono-channel (for powering subwoofers) and multi-channel (typically 2-channel, 4-channel, or more) amplifiers for driving speakers and other audio components.
Power Ratings: VM Audio amplifiers come in various power ratings, measured in watts RMS (Root Mean Square). The power rating determines how much audio output the amplifier can provide. Higher RMS wattage generally results in louder and more powerful audio.
Class D Amplification: Many VM Audio car amplifiers use Class D amplifier technology, known for its efficiency and compact size. Class D amplifiers are ideal for car audio systems as they generate less heat and use less power from the vehicle's electrical system.
Bridgeable: Some VM Audio amplifiers are bridgeable, allowing you to combine channels to provide even more power to a single speaker or subwoofer. This feature is useful when you want to maximize the output to a specific component.
Crossovers: VM Audio amplifiers often include built-in adjustable crossovers. Crossovers help in directing specific frequency ranges to the appropriate speakers or subwoofers, enhancing sound quality and clarity.
Protection Circuitry: These amplifiers typically come with various protection features, such as thermal protection, short circuit protection, and overload protection, to safeguard the amplifier and connected speakers from damage.
Design and Build: VM Audio car amplifiers are designed to be compact and easy to install in vehicles. They often feature sleek and durable designs that can withstand the harsh conditions of a car's interior.
Compatibility: VM Audio amplifiers are designed to work well with other car audio components, including speakers, subwoofers, and head units, allowing for a customizable and high-quality audio setup.
Affordability: VM Audio products are known for their competitive pricing, making them a popular choice for car audio enthusiasts looking for cost-effective solutions to upgrade their vehicle's sound system.
Warranty: VM Audio typically offers warranties on their products, providing customers with peace of mind and assurance of product quality.
In summary, VM Audio car amplifiers are designed to enhance the audio experience in vehicles by delivering more power to speakers and subwoofers. They are known for their efficiency, protection features, and affordability, making them a suitable choice for those looking to upgrade their car audio systems.
Below you can find our editor's choice of the best vm audio car amplifiers on the marketProduct description
Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.
Features:
- Electronic Crossover Network
- Bass Boost Circuitry
- 2 Ohm Stereo Stable
- RCA InputsLine Output (L/R) Channels
- Low + High Pass Filter Controls
- Power + Protection LED Indicators
- Soft Turn ON/OFF
- 1 x 650 Watt RMS @ 4 Ohm
- 1 x 1250 Watt Peak @ 4 Ohm
- 1 x 1500 Watt RMS @ 2 Ohm
- 1 x 2000 Watt Max @ 2 Ohm
- T.H.D.: <0.01%
- S/N Ratio: >90dB
- Freq. Response: 10Hz - 45kHz
- HPF Freq. Resp.: 80Hz
- LPF Freq. Resp.: 50Hz - 250Hz
- Fuse: 40A x 1
- Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
- Sold as : 1
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
- GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.
User questions & answers
Question: | I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it |
Answer: | It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery... |
Question: | My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work |
Answer: | Yes, I was running 2 kicker 12s, then went to the 3000 wat version. |
Question: | My subs are 4ohm will this work |
Answer: | No |
Question: | Will it do well without over heating with a 1400 watt pioneer sub |
Answer: | I think it depends on the box you go with |
Product features
Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm
- Electronic Crossover Network, Bass Boost Circuitry
- 2 Ohm Stable, RCA Inputs
- Line Output (L/R) Channels, Low + High Pass Filter Controls
- Power + Protection LED Indicators, Soft Turn ON/OFF
- 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
- 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
- T.H.D.: <0.01%, S/N Ratio: >90dB
- Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
- LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
- Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
Product description
Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.
For further product details, please scroll down.
- Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
- Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
- Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Product features
Boost your Bass
Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.
MOSFET and Class A/B
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable and High and Low Level Inputs
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Switchable Bass Boost
Switchable Bass Boost allows you to boost the low bass +18db.
Subwoofer Level Control
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Variable Input Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Illuminated BOSS Logo
The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.
Product description
Pump out your tunes with the Planet Audio Torque TR5000.1D monoblock class D amplifier. This powerful 1-ohm stable amplifier features 5000 Watts Max power with a MOSFET power supply to shift your audio experience Up a gear. Customize the sound with variable low pass Crossover, bass boost, subsonic filter and switchable phase control. Tweak the bass with the remote subwoofer control. For double the performance and power, strap on another TR5000.1D for a total power of 10000 watts @2-ohms. Torque amplifiers are built to last and designed for those who can't resist cranking it up. Whatever your power and size need, there is a Torque amplifier to fit the bill. Drive The beat up with the Planet Audio TR5000.1D.
- POWER: 5000 Watts Max x 1 @1-Ohm, 2500 Watts Max x 1 @2-Ohms
- CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- STRAPPING CAPABLE: You are able to strap TWO TR5000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- VARIABLE SUBSONIC FILTER: To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
User questions & answers
Question: | What is the rms power rating at 2 ohm? if it is 1500watts max at 2 ohm, it cannot be 1500watts or more rms watts at 2ohm |
Answer: | No it's not, you need to connect this between your amp and speaker, so it can control volume |
Question: | Will this push two 2000 watt vm 15's |
Answer: | Yes! The best way to do that is to open the front face place, remove the knob and unscrew the lock nut then unscrew the 4 screws on the face plate. Then just flip the whole face so it works upside down. If you have any questions, feel free to give us a call and we can help you out. 1.888.779.4968 |
Question: | Is it power hungry? And can it push 2 12 kickers |
Answer: | You store the speaker wire connectors in the box, please make sure the connectors used are not too large. |
Question: | Just purchased tr5000.1d... what is the best 2 15" subwoofers out there i could possibly run on this mean machine |
Answer: | You should not need this version which is powered. I made that mistake and burned up two channels on my router. The 8 ohm non powered is probably what you need. |
Product features
More Power
Boost the power behind your bass with the Planet Audio Torque TR5000.1D Class D Monoblock Amplifier. With 5000 Watts Max Power and MOSFET power supply, this amplifier offers stable, powerful bass. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Switchable Phase Control and a Remote Subwoofer Control. Strap this amplifier to another TR5000.1D for double the performance of 10,000 Watts @2-Ohms. Torque Amplifiers are built to last and designed for those who can’t resist cranking it up. Whatever your power and size need, there is a Torque Amplifier to fit the bill.
Class D and MOSFET
Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
Strapping Capability and 1 Ohm Stable
Strap two amplifiers together to get double the power at an impedance of 2-Ohms.
1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.
Variable Low Pass Filter and Subsonic Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.
Subwoofer Level Control and Variable Bass Boost
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Variable Input Control and Switchable Input Sensitivity
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.
Phase Control
Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
LED Illuminated Logo
The Planet Audio Logo is Illuminated with blue backlighting.
Product description
Break out the Bass with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. This powerful 2-Ohm stable Amplifier features 1500 Watts Max Power with a MOSFET power supply to drive your tunes to the limit. Customize the sound with Variable Low Pass Crossover and Bass Boost. Unleash the Bass with the Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Enjoy music on your terms with the Planet Audio AC1500.1M. For more product details, please scroll down.
- power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
- low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
- low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
- variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
User questions & answers
Question: | What amp will do for 3 fusion |
Answer: | 200 watts |
Question: | I cancled my order for an amp by mistake what can we do? I still want the order |
Answer: | It should do quite nicely I have it pushing 4 VM 12's an it still has power to go. Am running mine off 0ga wire cause I have noticed with out good power an ground it will heat up. |
Question: | Does this one come with a bass knob |
Answer: | Yes your power supply needs to b very strong, i wud suggest you get a power cap! I have this amp pushing 2 15 kicker comp right now, very powerful!! |
Question: | is this amp enough to power 1 pioneer tsw307d2 at 4ohms or 1 pioneer tsw3002d4 at 2ohm? I have 1 of each subs so whatever is best |
Answer: | Hello Robert, We do offer some great 15 inch speakers like the AC15D, but I would recommend the BBD12 as our best speaker. Thank you. |
Product features
Control Your Sound
Make your own music rules with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier lets you set your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud.
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Subwoofer Level Control
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Product description
This Hifonics BRUTUS Gamma BG Series Monoblock Super D Class Amp delivers a maximum of 2,200 watts for serious power for your car's subwoofer. The Super D Class design employs high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, this Super D Class amp has lower distortion, higher current efficiencies, and less heat than conventional D Class amp designs. Plus its Ultra-Fi MOSFET technology is designed for music production vs. just electronics output power. This produces very musical high power with high efficiency for cooling and minimal distortion. For serious power for your car's audio system, choose Hifonics' "Power from the Gods."
- 2,200 watts max
- 1,100 watts x 1 at 2 ohms
- 550 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion
User questions & answers
Question: | Will this push 2 12 l7's |
Answer: | The amp is monoblock, for one sub. I parallel wired them for me kickers |
Question: | Everything is hook up right light up but no sound |
Answer: | Just reorder the same one or a different one |
Question: | Will this amp power (2) audio pipe txx-bdc2-12” inch subwoofers |
Answer: | Yes, this does include a bass knob. |
Question: | Will it power ((2(( 2000watts 15 inch subs with 0 gage wier |
Answer: | i am running a TSW310D4 at 2 ohms and it is more then enough for it....love the amp does not get hot...great for one 12"... |
Product description
Get the most out of your sound with the Kicker CX400.1 Amplifier for Car Audio Speakers. CX-Series Mono Amps are ohm stable, giving you even more power and wiring options for your system. A powerful 12 dB crossover and 24 dB subsonic filter are included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. CX.1 Amplifiers accept up to 40 volts of speaker-level input signal. This kind of flexibility makes line-out converters unnecessary and optimizes your sound quality.
- CX-Series Mono is an efficient Class-D amplifier for your car
- Features a three-second on/off delay to eliminate unwanted interference
- Variable 12 dB crossovers let you control the dial to optimize your sound
- KickEQ 6 dB variable bass boost for any low frequencies you run into
- 24 dB subsonic protects the speaker from any potentially damaging frequencies
User questions & answers
Question: | does this have auto shut off when key is turned off? does it allow for high level (speaker) input |
Answer: | Probably not your best bet. I had it on my 12w7 Jl at 3ohms and it was striving for more power. Hifonics don’t make amps like they use to. I recommend a JP23 @ $299 from down4soundshop. |
Question: | Will this amp run 2- 12" kicker compvr 4 ohm |
Answer: | You sure you got a good signal with rcas got mine hooked up on two zxi 12s and my terrain is flexing hard afraid my back hatch gonna blow off |
Question: | I would like to use this amp in a single channel full range application. Can the crossover be disabled or set out of range |
Answer: | Absolutely |
Question: | What’s the wattage for 2ohms and 4ohms |
Answer: | Most definitely |
Product description
Kick your Bass into high gear with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. This powerful 1-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR3000D for a total power of 6,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR3000D. For further product details, please scroll down.
- Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms, 6000 Watts Max Bridged x 1 @2-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable - You are able to strap two AR3000D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Specs - Dimensions: 12.31” x 6.50” x 2.80”, Weight: 6.86
- Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
User questions & answers
Question: | Will these amp power these subs? https://www.amazon.com/dp/b014oykx2w/ref=olp_product_details?_encoding=utf8&me |
Answer: | Yes and yes |
Question: | Will this amp push 4 Elux 15 vm audio |
Answer: | each 12" 4 ohm sub would only get 75 watts of power, not a good turnstile for your system |
Question: | how can i hook up a 0 gauge wire to this |
Answer: | Thank you for your question. The crossover setting cannot be turned off and only goes up to 250 hz. Happy to help! |
Question: | Quiero saber si este amp me funciona bien para un parlante kicker l7 de 15 pulgadas |
Answer: | Thank you for your question. 150 RMS @ 4 ohms, 300 RMS @ 2 ohms. Happy to help! - Creative Audio |
Product features
Performance Power
Ramp up your vehicle's Bass with the Boss Audio Armor AR3000D Class D Monoblock Amplifier. With 3000 Watts Max Power and MOSFET power supply, this Amplifier packs an audio punch. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Remote Subwoofer Control. Strap this Amplifier to another AR3000D for double the performance. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.
Class D and MOSFET
Class-D amps run more efficiently and generate more power using a more compact design.
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
Strapping Capability and 1 Ohm Stable
Strap two amplifiers together to get double the power at an impedance of 2-Ohms.
1-Ohm stable gives you maximum power for superior wattage and performance without overheating. The greater the power the more current drawn from your vehicle's electrical system.
Variable Low Pass Filter and Subsonic Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.
Subwoofer Level Control and Bass Boost
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Low Level Inputs and Variable Input Control
Low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to units equipped with RCA Pre-amp outputs.
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Phase Control
Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up 'out of phase'.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Switchable Input Sensitivity
Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.
Product description
8 Gauge amplifier installation kit includes:
- 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
- 3 Foot - 8 Gauge Black Ground Cable
- 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
- 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
- (20) 4" Wire Ties, Rubber Grommets
- 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals
User questions & answers
Question: | does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind |
Answer: | It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :) |
Question: | What gage is the speaker wire |
Answer: | The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge. |
Question: | How long is the rca patch cable |
Answer: | 20 feet gold rca cable. It's long enough for me:) |
Question: | how many watts |
Answer: | 8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it. |
Product features
KIT2 Includes
Product description
Drive up your music vibes with the Planet Audio Anarchy AC1800.5 5-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 1800 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC1800.5.
For more product details, please scroll down.
- Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
User questions & answers
Question: | My receiver has 4 RCA outputs. Can I run the 4 RCA outputs into this amp and run 4 coaxial speakers plus a subwoofer |
Answer: | Yes you can. There is a switch on the amp and it will take the sound from channels 3 and 4, and use it for the subwoofer.. so you dont need a 5th rca cable. |
Question: | What is the RMS |
Answer: | Taken from Google: RMS stands for root mean squared.You use RMS to tell you in part how loud the speakers are going to be, you also you its sensitivity rating.RMS also tells you the most amount of watts that you speaker can handle on a continuous basis. This is the figure you use when looking for an amplifier and powering the speaker.1000w RMS is a lot and i would be very skeptical buying any speaker that says it handles 1000w RMS, most companies that put out a speaker like that inflate their numbers by making the THD level higher so once you turn it up the signal is not clear. Also they will make it 1000w RMS but its sensitivity rating is very low such as under 80db/1w.i know i have two JL subs that are rated at 300 watts RMS each and the 600 watts it puts out is enough to make me go deaf. |
Question: | I have a kicker 10" sub with 4 ohms, but when I hook it up to the amp I get absolutely no sound out of it. The first four channels are running fine |
Answer: | There is a switch near the sub control on the amp.. direct or channel 3-4. If you do not have a sub input the switch should be set to 3-4. So it will get the sound from channels 3-4. . Hope this helped |
Question: | Will this amp be suitable for 2 pairs of Pioneer TS-A6885R Speakers 350W (60W) nominal and TS-SWX251 Subwoofer Power(Nominal)800 W (200 W |
Answer: | It is extremely important to understand Ohms law when choosing speakers. One answer on another question says it is not 2 Ohm stable. They wouldn't make the UL list if it didn't. The fifth channel is 1 channel that is 2 Ohm stable. It can handle 2 single voice coil subs wired in parralel which brings the Ohms down to 2 Ohms. I do not recommend DVC in a mono amp unless the amp is 1 Ohm Stable. If you got 2 DVC subs wired parralel would present a 1 Ohm load to your amp and blow it up. |
Product description
Upgrade your audio system with Lanzar's next-generation power handling and distribution amplifier technology. New for 2014, Lanzar introduces the innovative Heritage Series Bluetooth Amps that combine high-performance audio processing power with Bluetooth wireless streaming capability!. Engineered to perform and packed with versatile sound specialization, the Heritage Series Amps also feature MOSFET efficient power processing, bass boost circuitry, 2 Ohm stereo stability, bridge-ability and plenty more features to amplify and satisfy. Join the trend of Bluetooth and sound amplifying power with Lanzar Heritage (HTG) amps.
Features:
- 4 X 250W + 1 X 650W RMS @ 4 Ohms
- 4 X 350W + 1 X 1,500W RMS @ 2 Ohms
- 2 X 1,000W MAX @ 4 Ohms Bridged
- 4 X 500W + 1 X 2,000W MAX @ 4 Ohms
- Wireless Bluetooth Audio Interface
- Bass Boost Circuit
- Bridgeable at 4 Ohms
- 2 Ohm Stereo Stable
- Chrome RCA inputs
- Stereo Line Outputs for Left and Right Channel
- Low Pass Filter Controls
- LPF Freq. Response: 40Hz-250Hz
- High Pass Filter Controls
- HPF Freq. Response: 40Hz-250Hz
- Band Pass Filter Controls
- BPF Freq. Response: 40Hz-3KHz
- Power and Protection LED Indicators
- Soft Turn-on/Turn-off
- THD: <0.01%
- S/N Ratio: >90dB
- Channel Separation: >65dB
- Freq. Response: 10Hz-45KHz
- Fuse: 30A X 3
- Dimensions: 19.29''(L) X 2.24''(H) X 8.81''(W)
- Sold as : 1
- AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
- INTELLIGENT DESIGN: The car audio amplifier 5 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
- BLUETOOTH: With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device. Instantly stream your favorite tracks from your smartphone or tablet, or favorite internet radio providers like Pandora, Spotify, iHeart.
User questions & answers
Question: | Can I run a chuchero and a subwoofer |
Answer: | BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all. |
Question: | Can I run 2 midrange speakers and a subwoofer |
Answer: | Hi, it is a class D amplifier. Thank you. |
Question: | Bluetooth version? AptX features |
Answer: | yes. it comes with an external microphone. |
Question: | Is it monoblock? Class d? Class a? class a/b? Class b |
Answer: | please select shipping from JOINLGO not amazon, then we will send the kit to you from China via DHL fast shipping. please leave order message "needs 9" screen", then we will send the kit with a 9" monitor. thanks, |
Product description
This Crunch PX 1000.4 4 channel amplifier is a perfect entry level amplifier for you car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion. Crunch POWERX incorporates full Class A/B technology in stereo and four channel amplifiers along with Class D in the mono. Class A/B sounds better, but the PC boards require a bit more space that in other circuit topologies. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sound like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions. These high performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor. We are an authorized Crunch Dealer!
- Crunch PX 1000.4 4 Channel Car Amplifier
- Power:
- 2 Ohms: 4 x 250 Watts
- 4 Ohms: 4 x 125 Watts
- Mono Bridged @ 4 Ohms: 2 x 5000 Watts
User questions & answers
Question: | Is this bridgeable planning to run 2 subs |
Answer: | Yes I have 2, 4K watts on 4 Alpine 2ohm dual 2000 watt 12’s and it sounds like four king Kong’s and two incredible hulks are trying to get out my old school |
Question: | What are the dimensions of this amp and what is the rms |
Answer: | If you wire the sun's together it should have no problem |
Question: | can I run four mid and four tweeters with This amp |
Answer: | With 0 gauge wire connectors |
Question: | whats the rms |
Answer: | te funciona muy bien. lo tengo montado con uno de 15 pulgadas |
Product description
Planet Audio MB300 4D 4 Channel Class D Car Amplifier - 1200 Watts 2 Ohm Stable Digital Full Range Mosfet Power Supply Great for Speakers and Subwoofers
- Power - 300 Watts Max x 4 @2-Ohms 150 Watts Max x 4 @4-Ohms 600 Watts Max Bridged x 2 @4-Ohm
- Class D - Power loss is significantly reduced making the amplifier highly efficient Excess energy is stored until it’s needed instead of being converted into heat Reduction in size/weight reduced power waste smaller heat sink compact circuitry
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Variable High-Pass Crossover - Speakers reproduce sound based on high low or mid-range frequencies A variable high pass crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
- Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies You can set exact sound specifications for the bass frequency reproduction
Product features
Class D
Class-D amps run more efficiently and generate more power using a more compact design than traditional Class A/B amps.
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Variable High Pass Filter
Variable high-pass filter gives you control over the frequencies that pass through to the full range speakers.
Variable Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Switchable Input Sensitivity
Switchable input sensitivity provides adjustable control over input signal from the head unit to achieve customized balance between power and sound quality.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Product description
Complete your car's sound system setup with the Hifonics Brutus Gamma 4-Channel Super A/B Class Amplifier. This subwoofer amp delivers power efficiently and effectively to your subwoofers, speakers, and other output devices for crisp sound with minimal distortion and heat. Control your sound with this car audio amp. This 1,000-watt amplifier sports a 4 channel operation that lets you choose between stereo and mono bridged operation. You also can customize your sound with this car audio amp's variable electronic crossover and electronic equalizer capabilities. Made for efficient power performance, this car audio amplifier is rated @ 2 ohms - 4 channels x 250 watts; @ 4 ohms - 4 channels x 125 watts; mono bridged @4 ohms - 2 channels x 500 watts. This 4-channel amp uses Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion. All connections are secure with this car subwoofer ampflier. This amp features nickel-plated connectors and a molded connection terminal that's angled for easy access to all power, ground, and speaker connections. Pump up the sound with the Hifonics Brutus Gamma 4-Channel Amplifier.
- POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this Super Class A/B, 1,000-watt, 4 channel car audio amplifier
- OPERATION: Control your sound with 4 channel operation with either stereo or mono bridged operation, variable electronic crossover, and electronic equalizer capabilities; Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
- OUTPUT TECHNOLOGY: Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction maximizes power for sound, maximizes efficiency for cooling, and minimizes distortion
- CONNECTORS: Secure molded connection terminal with easy-to-access, angled ports for all power, ground, and speaker connections and high-temperature, impact-resistant, nickel-plated connectors; Nickel-plated connectors deliver efficient high/low level audio, crisp sound, while providing a secure and erosion-resistant seal
- POWER: @ 2 ohms - 4 channels x 250 watts; @ 4 ohms - 4 channels x 125 watts; mono bridged @4 ohms - 2 channels x 500 watts; Dual coil Pulse Width Modulated power supply keeps voltage constant through Ultra-Fi output devices
User questions & answers
Question: | Stop working |
Answer: | Not a wise decision just get 2000 Mona block to run the 2 subs |
Question: | Does this come with a bass knob |
Answer: | It's about 14" x 10" what are you trying to use it for? HI's, Subs? I used mine to push to kicker 10" subs. Works well but if I knew before I would go with a stronger amp just for subs. RMS is pretty low not sure what it is I got rid of the box a while back. Hope this helps |
Question: | Is this amp a 2ohm stable amp |
Answer: | I had someone hook mine up....BUT, I’m running my 2 12s, 6x9s and front doors off this amp. |
Question: | can someone help me figure out which speakers to get for the 4 channel 1600 hifonics brutus ? 4 speakers for pt cruiser |
Answer: | I never purchased this product or remember that i posted a statement. |
Latest Reviews
View all
Smart Usb Charger
- Updated: 18.07.2023
- Read reviews

Security Cameras
- Updated: 25.02.2023
- Read reviews

Household Essentials Clothes Drying Racks
- Updated: 06.06.2023
- Read reviews

Northside Waterproof Hiking Boots
- Updated: 18.02.2023
- Read reviews

Ion Dvd Player Software
- Updated: 12.07.2023
- Read reviews