4 best boss audio car amplifiers

Product description

BOSS Audio R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Monoblock, MOSFET Power Supply, Remote Subwoofer Control

• Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
• Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
• Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	Can you shut off the badge lights
Answer:	Not to my knowledge. Not unless you open it up and disconnect the power line feeding the light.
Question:	Por que tan caro el derecho de exportación
Answer:	lo traje a bogota colombian no por el servicio de mensajeria de amazon por que sale muy caro lo traje por un casillero virtual que ofrese la emresa 4-72 y salio por como por 30 dolares
Question:	Quiero una pero que sea de bajo 2000 Wats
Answer:	Ayuda mucho buscando el real sonido
Question:	Is these good for a Subaru tribecca 2007.? I will use 400 watts speakers
Answer:	Yes should work fine

Product features

Let The BASS Take You To Another Place

Enjoy clear sound with the BOSS Audio Riot R1100MK Monoblock Class A/B Amplifier and 8-gauge wire installation kit. With 1100 Watts Max Power and MOSFET power supply, this 4-Ohm Amplifier provides clean sound to give your music an extra boost. The included amplifier installation kit gives you everything that you need to bring power to your subwoofer. Riot amplifiers are great for enhanced sound and performance for all 12V applications at an affordable price.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

Drive up the volume with the Boss Audio Phantom PT3000 2-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable amplifier features 3000 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with the Variable Low and High Pass Crossover and Bass Boost. Shift the sound into high gear with the Remote Subwoofer Control. Bridge Channels for even more power and flexibility. The Phantom Series are full-featured amplifiers that offer eye-catching Multi LED Backlit Illumination and customization for high quality sound and performance. Enjoy better sound with the Boss Audio PT3000. For more product details, please scroll down.

• POWER: 1500 Watts Max x 2 @2-Ohms, 750 Watts Max x 2 @4-Ohms, 3000 Watts Max x 1 Bridged @4 Ohms
• CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
• FULL RANGE: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
• LOW / HIGH LEVEL INPUTS: A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• VARIABLE BASS BOOST: With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• BRIDGEABLE: Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	Will this amp be able to run four 1500wat subs
Answer:	I'm not expert, but surely it would be able to, it just wouldn't be able to run them at their peak power... and it would still beat hard as hell, because 3000 watts is more than enough to power 4 subs. IMO, it would be overkill to go higher, but you would have many on here who would disagree. it's always worth trying out and returning if you're not satisfied with it.
Question:	Does this unit utilize speaker level input turn on like some kenwood models or do i have to run a seperate remote wire
Answer:	Remote wire turn on.
Question:	For the PT3000 what gauge is recommended
Answer:	I recommend 4 gauge for this amp. Plenty of room on the terminal and supply. There are great quality inexpensive kits on here (amazon).
Question:	Will this work with two 15 inch kicker comp r subwoofers
Answer:	I have the boss 4000 mono running the same subs and it smoked the amp after 2 months
Question:	Will this work good with the boss phanton 2300 watt sub
Answer:	Its a wonderful product i have it in my impala it works great.