10 best car stereo amps

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

The Blaupunkt 1500W 4-Channel, Full-Range Amplifier (AMP1504) embodies over 90 years of innovation and excellence in Blaupunkt products, making it the perfect amplifier to install into your motor vehicle. With an optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road. This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system. Get amped up for the Blaupunkt 1500 Watts 4-Channel, Full-Range Amplifier (AMP1504) and take your car to the next level.

Amplifier Class: AB

No of channel: 4/3/2 Channel

Max. Output Power: 1500W x 4

RMS Power (4 Ohms): 150W x 4

RMS Power (2 Ohms): 300W x 4

Frequency Response: 10Hz - 45Hz

Signal-To- Noise Ratio: =>90dB

Voltage Supply: 11 - 15V DC

Gain Adjust: 150mV-6V

Total Harmonic Distortion: <=0.05 percent

RCA Input: 4-Channel

Crossover Frequency: 50Hz - 400Hz

Crossover Slope (dB/oct): 8-10dB/oct

Fuse: 30A x 2

Dimension: 8.6" x 7.5" x 2.1"

• 1500W Maximum Power Full-Range Amplifier
• Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
• This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

User questions & answers

Question:	I have a couple 6x9 and a box with separate chambers for 8” subs any pros or cons
Answer:	The amplifier runs warm in high pass so it will probably run hot but does have thermal protection circuitry and will reset but wouldn't advise running it like that!!!
Question:	It quit working with in 10 minutes. It has a red fault light not green. I disconnected the speaker wires killed power turned on still red . What to do
Answer:	Make sure power lines and especially a ground wire is hooked up properly. That's the main thing ground is very important that's actually touching metal the car itself. And none of the speaker wires are shorting out
Question:	Does this amplifier support bluetooth operation
Answer:	No it doesn’t..... I bought this same 1500 watt full range amp and tried to get in touch with Blaupunkt for some tech questions I had, GOOD LUCK WITH THAT!!!! Apparently Blaupunkt amps are not associated with or made at same place as All other Blaupunkt audio units & products, search it on internet
Question:	how many true watts does a 1000 x 4channel amp actually put out
Answer:	I'll post a link to a youtube video where this amp was put on the Amp Dyno but if you don't feel like watching it the results were 65- 71 per channel (cea certified) @ 4 ohm @ 14.56V. Keep in mind those numbers will drop when an amp is installed in a car because your only going to about 13.4 to 13.9 V to the amp and that"s if everything is the right size and grounded properly. As a rule of thumb a single 30-amp fuse means that the amplifier can produce 300 watts of power at most. A60 amp fuse will make 600 watts plus or minus 10-20 depending on the quality of the amp. The quality of this amp is crap it may have 2 30A fuses but makes no where near that power. At 2 ohms it makes about 100 watts per channel. The 2 30A fuses making 600 watts doesn't account for the total efficiency. This amp is about 70 efficient which is awful ! If you plan on using this to power 4 door speaker at 4 ohms 65-70 watts it will work just fine because guess what those 6.5" 500 watt speakers lied about the power handling too. If your not very familiar with car amps and want to know if your getting a deal or ripped off watch this guys videos, https://www.youtube.com/watch?v=FbA2Vdg3uSo thats for this amp and 2 other Bloujunk amps. If you're looking for a budget amp that puts out like a prom date, 1100 watts @ 1 ohm (2 ohm DVC sub) for $104 check out his video of a dyno drag race the Ignite R3000/1D vs the 2nd best budget monoblock amp the BOSS AR4000D. https://www.youtube.com/watch?v=UvHWxhm7Eog&t=630s My advice buy the Ignite and the warranty Amazon sells for $20 so you know your going to get 2-3 years of worry free ownership.

Product features

AMP1504

Get amped up for the AMP1504 and take your car to the next level.

Technical Data

Amplifier Class: AB, No of channel: 4/3/2 Channel, Max. Output Power: 1500W x 4, RMS Power (4 Ohms): 150W x 4, RMS Power (2 Ohms): 300W x 4, Frequency Response: 1 0Hz - 45Hz, Signal-To- Noise Ratio:=>90dB, Voltage Supply: 11 - 1 SV DC, Gain Adjust: 150mV-6V, Total Harmonic Distortion: <=0.05%, RCA Input: 4 Channel, Crossover Frenquency: S0Hz - 400Hz, Crossover Slope (dB/act): 8-1 0dB/oct, Fuse: 30A x 2, Dimensions: 8.6 x 7.5 x 2.1 in.

Product description

Specifications:

Model:V12 705

MAX Power: 4ohm 120w

RMS Power: 4ohm 60w

THD: ＜0.02%

Bridged Power:200w/4CH

Frequency Response:20Hz~20KHz

Operating Voltage:12V

Impedance:4Ω

Maximum Power:3800W (950W x 4)

Dimension:32CM*26CM*6CM

Material:Aluminum Alloy



Package includes:

1 X 4 Channel Car Amplifier

4 X Screws

1 X English User Manual

• Brand new and reliable quality 4 Channel Car Amplifier
• Can connect to 4 speakers,6 phase high frequency intermediate frequency low frequency regulation
• Double low frequency output,can be push any size Subwoofer within 160W rated power
• This 4 channel amp is also equipped with fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.

User questions & answers

Question:	Will this amp push 2 6"9 and 2 front door speakers
Answer:	It does. I have a 2010 Escape and it fits both in the flat and angled positions.
Question:	Is this made to connect to a subwoofer
Answer:	Excellent product Two sockets, 2 USB ports. Sometime it gets a little loose in the car socket when I have my cellphone plugged in and I pull the phone away from the port. No real problem. Buy it.
Question:	Signal to noise ratio? 2 ohm stable
Answer:	No not at all
Question:	Can I connect another amplifier to this one
Answer:	Yes, that is what I purchased it for.

Product description

This **Crunch PX 1000. 2 2 Channel Amplifier** is a perfect entry level amplifier for your car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion. Crunch POWERX incorporates full Class A/B technology in stereo and four channel amplifiers along with Class D in the mono. Class A/B sounds better, but the PC boards require a bit more space that in other circuit topologies. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sound like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions. This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, (20) 4" wire ties, rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal.

• Crunch PX 1000. 2 2 Channel Car Amplifier
• Power:
• 2 Ohms: 2 x 500 watts
• 4 Ohms: 2 x 250 watts
• Mono Bridged @ 4 Ohms: 1 x 1000 watts

User questions & answers

Question:	Will it run an alpine 10 inch
Answer:	Yes. I have it running an 8" Alpine and it sounds awesome
Question:	I have a jl 10 TW3-D4 will a crunch 1000 watt be to much power for it
Answer:	No this amp will do just fine for 10s
Question:	Will this amp work with my audiopipe 10's
Answer:	Yes the amp sounds great it should do well with 10 in great
Question:	How well does this do in humid conditions? Anyone know
Answer:	It should work perfectly fine.

• Crunch PX-1025.2 Two Channel Class A/B Amplifier + Gravity Magnet Phone Holder Bundle
• Power Ratings: 4 Ohms: 250 Watts x 2 2 Ohms: 500 Watts x 2 Bridged 4 Ohms: 1000 Watts x 1
• High-level Inputs | Variable Electronic 12dB Per Octave
• Built-in Bass Control | Speaker Level Inputs
• Operation Modes: Stereo, Bridged Mono or Stereo/Bridged Mono Simultaneously

User questions & answers

Question:

Can I use this to power 1 -10", 2 Ohm sub

Answer:

You will need a mounting rail for the drive (with screws) to secure it in the computer, similar to http://www.amazon.com/StarTech-com-Universal-Mounting-Bracket-BRACKET/dp/B0001UZQWG/ref=sr_1_2?s=electronics&ie=UTF8&qid=1402791368&sr=1-2&keywords=hard+drive+mounting+rail+kita SATA cable to connect to your motherboard if you do not have an extra available, such as: http://www.amazon.com/Monoprice-18-Inch-Locking-90-Degree-108783/dp/B009GUXU52/ref=pd_sim_pc_23?ie=UTF8&refRID=1039H3T1A80RRZ6K7P7H,and an available power plug or Y-cable (the white 4 pin or 6-pin) depending on what power cables your computer has, again depending on whether your computer has an extra alreadyhttp://www.amazon.com/StarTech-com-PYO2SATA-Power-Splitter-Adapter/dp/B002N2EHVQ/ref=sr_1_4?s=electronics&ie=UTF8&qid=1402791237&sr=1-4&keywords=computer+power+y+cableorhttp://www.amazon.com/Computer-Molex-Power-Supply-Splitter/dp/B001PI9AAC/ref=sr_1_3?s=electronics&ie=UTF8&qid=1402791237&sr=1-3&keywords=computer+power+y+cableYour computer may already have a full width cable internally, in which case it will provide both power and communication

Product description

This Crunch PX 1000.4 4 channel amplifier is a perfect entry level amplifier for you car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion. Crunch POWERX incorporates full Class A/B technology in stereo and four channel amplifiers along with Class D in the mono. Class A/B sounds better, but the PC boards require a bit more space that in other circuit topologies. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sound like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions. These high performance copper wires are wrapped in the durable and flexible SurfaceFlex wire jacket for effective cable routing. The CRB fuse holder has been specially plated with nickel for corrosion protection against the elements. Last but not least, distortion and external noise are reduced to a minimum with the Strand Interaction Conductor. We are an authorized Crunch Dealer!

• Crunch PX 1000.4 4 Channel Car Amplifier
• Power:
• 2 Ohms: 4 x 250 Watts
• 4 Ohms: 4 x 125 Watts
• Mono Bridged @ 4 Ohms: 2 x 5000 Watts

User questions & answers

Question:	Is this bridgeable planning to run 2 subs
Answer:	Yes I have 2, 4K watts on 4 Alpine 2ohm dual 2000 watt 12’s and it sounds like four king Kong’s and two incredible hulks are trying to get out my old school
Question:	What are the dimensions of this amp and what is the rms
Answer:	If you wire the sun's together it should have no problem
Question:	can I run four mid and four tweeters with This amp
Answer:	With 0 gauge wire connectors
Question:	whats the rms
Answer:	te funciona muy bien. lo tengo montado con uno de 15 pulgadas

• Efficient Class-D amplifier
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies
• Variable 12dB crossovers provides control to dial in perfect sound
• 24dB subsonic filter for protection from potentially damaging frequencies

User questions & answers

Question:	Is this amp good for. Two 15 inch solo barrick kickers
Answer:	I would say yes
Question:	Can thiis amp handle 2 kicker cvrs 15inch
Answer:	If the fuel line has same fuel line coupling then yes >I can only say it worked on my F150 very well
Question:	Will this work for 3 10inch kicker rt at 1ohm
Answer:	This product fits 3/8” & 5/16” fuel lines. I bought this tool specifically for a 2006 F-350. If you add your vehicle to the Amazon garage, it should give you product that fit your vehicle.
Question:	Would this amp be perfect paired with the solo baric L7 12" single sub @2ohm 750 rms 1500 peak
Answer:	It's a set there should be no problem

Product features

CX Amplifiers

CX-Series Amplifiers are the perfect combination of big power, bigger flexibility, and true reliability!

Control It

A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.

One Ohm Stable

Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!

Towers of Power

CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!

Incredible Sound Everywhere

KICKER’s CX-Series amplifier technology provides clean, powerful music in nearly any vehicle on the road today, without changing your radio or adding a line-out converter. These powerful amps work with as little as nine volts of power from your battery and as much as 40 volts (400 watts) of speaker-level input signal. With KICKER’s FIT+ (Fail-safe Integration Technology-PLUS), you get outstanding noise rejection - even with premium factory audio systems.

Product description

Pioneer GM-A3702 2-Channel Bridgeable Amplifier , Black/red. Low-Pass Crossover Frequency = 80 hertz.

• 500 Watts Max Power
• Automatic signal sensing and Turn-On
• Hi-Volt input level control
• Balanced isolator input circuit

User questions & answers

Question:	Will this work for (2) 10 inch rocford fosgate subs
Answer:	They are over the ear they are very comfortable.This Bluetooth headphones are equipped with Upgraded Soft Ear Cushions, which not only make it much more durability and comfort, but also make customers enjoy this high-quality.Value for money！
Question:	using an ipod nano as the input to this amp, will it turn on automatically and will it function properly
Answer:	Yes, you can. I bought a blutooth adapter it came with a usb connection and i all i needed to do was buy a ananlog wire plug it into my samsung and then once the transmitter connects to the headphones your good to go.
Question:	Will this work for two 8in pioneer shallow mount subs
Answer:	Good. These are not expensive headphones, so they good for the price.
Question:	What amp would be best for mtx terminator
Answer:	Yes, it can be used by a child.

Product features

Pioneer GM-A3702 2-Channel Bridgeable Amplifier ,Black/red

Technology of the GM Series

From dramatic distinction to dramatic design, Pioneer's new GM-Series amplifiers are thrillers in every sense, pushing the limits of flexibility and functionality.

Growing Power, Shrinking Size

New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient size for flexibility of installation in various car cabins.

Automatic Signal Sensing and Turn-On

Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.

Product description

Break out the Bass with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. This powerful 2-Ohm stable Amplifier features 1500 Watts Max Power with a MOSFET power supply to drive your tunes to the limit. Customize the sound with Variable Low Pass Crossover and Bass Boost. Unleash the Bass with the Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Enjoy music on your terms with the Planet Audio AC1500.1M. For more product details, please scroll down.

• power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
• low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
• low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
• variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	What amp will do for 3 fusion
Answer:	200 watts
Question:	I cancled my order for an amp by mistake what can we do? I still want the order
Answer:	It should do quite nicely I have it pushing 4 VM 12's an it still has power to go. Am running mine off 0ga wire cause I have noticed with out good power an ground it will heat up.
Question:	Does this one come with a bass knob
Answer:	Yes your power supply needs to b very strong, i wud suggest you get a power cap! I have this amp pushing 2 15 kicker comp right now, very powerful!!
Question:	is this amp enough to power 1 pioneer tsw307d2 at 4ohms or 1 pioneer tsw3002d4 at 2ohm? I have 1 of each subs so whatever is best
Answer:	Hello Robert, We do offer some great 15 inch speakers like the AC15D, but I would recommend the BBD12 as our best speaker. Thank you.

Product features

Control Your Sound

Make your own music rules with the Planet Audio Anarchy AC1500.1M Monoblock Class A/B Amplifier. With 1500 Watts Max Power and MOSFET power supply, this Amplifier lets you set your audio experience. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

• 50 Watts x 4 @ 4-Ohm / 75 Watts x 4 @ 2-Ohm / 150 Watts x 2 @ 4-Ohm Bridged
• Accepts High Level & RCA Level Input
• Cast aluminum heatsink with Top Mount Controls
• 12dB/octave crossover
• Class A/B Circuit Topology

User questions & answers

Question:	Would this power a Pioneer TS-A6995R 7 way speaker. I really do need as much sound as I can get. Can the tech guys break this down for me please
Answer:	No they haven't; good thick pads but the straps still break after couple weeks continued use
Question:	Does the R300X4 have speaker level inputs
Answer:	They are!
Question:	I'm installing to a factory stereo with 4 aftermarket door speakers. Will this AMP still require LOC's (line out converters
Answer:	Have not installed it inside a computer case; I use externally. My guess not more than 2 traditional HDs. Nowadays the larger noisy drives are unnecessary.
Question:	What are the dimensions of the amp
Answer:	Yes... These are designed for 2.5 inch or 15mm drives..