12 best camera cine dollies

Product description

The Dev Dolly Pro kit is a rugged and portable dolly solution for filmmakers wanting a small footprint on set without sacrificing stability or safety. The versatility of the Dev Dolly universal track mounting system means you can mount to any metal rail that is 1-2 inches. The ultimate portable dolly system includes: -Dev Dolly Pro sled -heavy duty 3/16” thick cnc machined aluminum plate -Built in mitchell plate adapter to attach various bowl sizes -Built in spirit level -Multiple 1/4 20 & 3/8 threaded holes for mounting -Anodized Black Industrial Matte Finish to Remove Glare and Reflection -4 Soft polyurethane wax coated squeak free wheel sets -608Z precision bearings -8” riser -3 plate mounts -flat mount plate with 3/8 bolt -75 mm bowl adapter -100mm bowl adapter -2 universal rail mounting brackets with adjustable legs and 1/4 20 & 3/8 mounts for tripods and baby and junior combo stands -3 included male junior/ female baby pin posts-remove the set screw for junior mounting -ideal for 1-2” metal rails at most hardware stores. -2 anti-tilt brackets for safety -Intuitive breaking system by lifting the sled and turning one or more wheel sets sideways -rugged molded plastic carry case.

• heavy duty 3/16” thick cnc machined aluminum plate
• Built in mitchell plate adapter to attach various bowl sizes
• Multiple 1/4 20 & 3/8 threaded holes for mounting
• 4 Soft polyurethane wax coated squeak free wheel sets -608Z precision bearings

User questions & answers

Question:	Will this Dolly work on Dana Dolly rail support
Answer:	Yes, this dolly will work. This dolly supports rail piping that’s 1” to 2” thick and normally the Dana Dolly rail support is 1 1/4” size pipe. Hopefully this helps.

• Fit for DSLR Cameras and Mirrorless Cameras and IPhone Photography Shooting. Please adjust the barycenter to a stable state before using the auto dolly driving.
• With 1/4 and 3/8 Screw Hole and 1/4 and 3/8 Screw, it can be equipped with various kinds of ball head monopod.
• Be available for both straight line shooting and curve photograph, pitch shooting, angle is no-limited.
• Be available for 6m distance remote monitor control with 3 grades speed adjust design.
• Convenient using as afford for USB power charge and driving on parallel rail, delicate design for easy-carry.

User questions & answers

Question:	Hi, what is the camera weight limit
Answer:	Hi，thank you for your question. The Max weight is 6.6 lb. It could be a little heavier if keep the balance well.
Question:	can you charge the controller or is it replacable batteries
Answer:	Batteries. I keep mine outside of controller when not using because I think it drains the batt even when it is off.
Question:	Does it come with mount s, specifically for a phones
Answer:	If I remember correctly, I only received the adapter with the 1/4" stud to mount the camera to. I don't recall receiving a phone holder.
Question:	what would be the distance between parallel rails for this slider
Answer:	The dolly can be used on a carbon fiber slider with a suggested space between the two slider tube of 80mm/3.15in.

Product features

1/4 & 3/8 Thread Hole with 1/4 & 3/8 screw, for installing photography cameras and phones

• Fit for DSLR Cameras, Mirrorless Cameras and iPhone Photography.
• With 1/4 & 3/8 Thread Hole and 1/4 & 3/8 Screw, it could mount various kinds of camera devices, such as DSLR cameras, mirrorless cameras, mobile phones, camcorders or ball head.And even slide on the track slider.

Straight Line and Curve Line Shooting Smoothly

• This camera dolly is available for both straight line and curve photograph, pitch shooting, angle is no-limited.
• Enjoy a 360° panning shooting!

Remote Control for Auto Moving

• The electric camera dolly is equipped with a remote control for auto moving
• Up to 6m/20ft remote distance provides much convenience for your photography.

Scale Marked to Adjust Direction Easily

• In order to adjust direction easily and clearly, Y5D auto dolly is specially marked scales on the wheels, which will help set the direction very clearly before moving.

3 Level Speed Adjustable

• The electric slider provides 3 speed levels, which will help produce the best shooting effect.
• When dolly's upload is 2.2lb(load max.6.6lb ) with enough power on horizonal level ground, the speed differences are listed below:
• 0.6in/sec for level 1,
• 0.9in/sec for level 2,
• 1.2in/sec for level 3.

Compact Design & USB Charge

• Delicate design, compact size with light weight(0.9lb) allow for carrying in pocket easily.
• Y5D auto dolly supports USB charging and driving on parallel rail.
• The indicate lights will remind you the power left and speed level clearly

Product description

Heavy duty, super sturdy dollies are designed for use with large still and video tripods. They feature large 127mm individually braked wheels with cable guards. Folds for transporting with ability to accept spiked tip tripods. This replaces the Manfrotto 3198. Color: black; diameter: 44.09 in.; height: 8.66 in.; load capacity: 132.28 lbs.; material: aluminum; weight: 13.67 lbs.

• 5- Inch wheels for extremely smooth operation
• Folds for easy transport
• Wheels are individually braked for safety and security
• Supports up to 132 pounds
• Aluminum construction for lightness and durability

Product description

This Camera car is the quietest, smoothest and most versatile camera slider on the market. As you slide the camera across the slider and take pictures, each picture is seeing the subject at a different angle. This professional camera slider provides shake free stability &Support to Cameras while shooting.



Product Features



Battery: CR2 lithium battery

Voltage: 3V

Battery capacity: 800mAh

Speed: 2.5cm/s

Load: 6KG

Noise: 60DB

Weight: 210g

Size: 102x141x65mm

Use time: 1 hour under heavy load, 10 hours under mobile phone load



Whats Included?



- 1 pc High Quality Slider car



Note: Only the camera car is included, and the camera and tripod are not included

• ▲ Max load 4.5lbs / 2kg Aluminum alloy Material
• ▲ Very Smooth Ball Bearing Slide System
• ▲ Universal 1/4"male threads to mount camera or ball Head,Multiple 1/4"& 3/8" screw holes on both ends,middle and beneath the slider for multiple mounting options.
• ▲ Power supply mode: lithium battery
• ▲ Multi-Angle Shooting: Available 360 degrees shooting by using the threaded holes in the Slide Car

Product description

Features:

Made of premium aluminium alloy with precision machining and anodized surface, sturdy, lightweight, durable, anti-rust, with great load capacity up to 3kg.

WIth a remote controller, you can control the car with controller for start and stop, go forward and back, speed adjustments(3 modes). Controllable distance is under 6m, suitable for many uses.

The front wheels can be adjusted in multiple angles to enrich shooting angles for more possibilities, close-up shooting and 360 degree panorama shooting.

With 1/4'' & 3/8'' thread holes on the plate, universal and compatible with various accessories, you can rig ball head or phone clip on it to shoot with camera or smartphone.

Powered by built-in battery, can be charged with USB cable, the working endurance is relevant to the weight placed on the car.

Portable and versatile, compatible with DLSR cameras, action cameras, and cellphone. This car is a good helper for photography lovers to achieve various interesting and professional shootings.

Specification:

Material: Aluminium Alloy

Color: Black

Remote Control Distance: <6m

Speed Modes: 2.4cm/s; 2.6cm/s; 2.8cm/s (Less load, faster speed)

Load Capacity: Approx. < 3kg / 6.6lbs

Working Time: About 18 hours

Charging Time: About 3 hours

Compatibility: for DSLR Camera & Action Camera & Cellphone (Ball head adpater or phone clip is needed and not included)

Size: Approx. 12 x 16.5 x 3.2cm / 4.72 x 6.5 x 1.26inch

Weight: Approx. 488g

Package Included:

1 x Slider Car

1 x Remote Controller

1 x USB Cable

1 x Wrench

1 x Spare Rubber Ring

1 x Adapter (1/4'' & 3/8'')

1 x User Manual

1 x Mini Ball Head

1 x Phone Clip

Other items in the picture are not included.

• WIRELESS REMOTE CONTROL: The wireless remote control can change speed & direction and make a pause, 3 speeds adjustable (2.4cm/s, 2.6cm/s, 2.8cm/s), effective distance 6m / 19.7ft; the dolly itself has control keys too
• 360° ROTATION & 180° WHEEL ADJUSTABLE: 180° adjustable wheel angle, you can achieve creative circle route/ straight line movement. It can drive left and right
• USB CHARGING: Easy to charge through the USB charging cable.Built-in 1800mAh rechargeable li-ion battery can offer up to 6hrs service time
• POCKETABLE AND DURABLE: Pocket size and lightweight, easy to carry. Made of high quality aluminum alloy, can hold up to 5kg/11Lbs of load
• MUTILPURPOSE: With 1/4" to 3/8" convertible screw is suitable for Canon Nikon Sony DSLR camera and iPhone Samsung Huawei Smartphone and more

Product description

Features:

Constructed of durable aluminum alloy, max. load capacity is up to 20kg.

Firmly hold your tripod to support your camera, it offers maximum stability to avoid camera shaking and achieve best shooting effect during professional shooting.

Super flexible legs (adjustable from 27cm to 41cm) are for easy positioning, even on uneven and rough surface. 360° rotatable legs, move smoothly and stably.

This tripod dolly is indispensable, especially for night and close-up shooting. The tripod dolly is also widely used in concert, stage and meeting shooting.

With moderate weight, also portable for your outdoor shooting.

Equipped with flip lever leg locks make opening and positioning the tripod dolly legs and pulleys.

Adjustable screws for kinds of tripods.

It is really an ideal companion of your tripod when you use digital camera or camcorder during your traveling.



Specifications:

Brand: KINGJOY

Model: VX-600

Material: Aluminum alloy & ABS

Max. Load Capacity: 20Kg / 44.1Lbs

Extended Length: 900mm

Folded Length: 430mm

Item Weight: 1.584Kg / 3.49Lbs

Package Size: 16 * 16 * 49cm / 6.3 * 6.3 * 19.3in

Package Weight: 2.214Kg / 4.88Lbs



Package List:

1 * VX-600 Tripod Dolly

1 * Nylon Carrying Bag



Note:

Tripod is not included.

• Constructed of durable aluminum alloy, max. load capacity is up to 20kg.
• Firmly hold your tripod to support your camera, it offers maximum stability to avoid camera shaking and achieve best shooting effect during professional shooting.
• Super flexible legs (adjustable from 27cm to 41cm) are for easy positioning, even on uneven and rough surface. 360° rotatable legs, move smoothly and stably.
• This tripod dolly is indispensable, especially for night and close-up shooting. The tripod dolly is also widely used in concert, stage and meeting shooting.
• With moderate weight, also portable for your outdoor shooting.

• Portable 3-wheel auto dolly with 5 levels of adjustable speed(11.8mm/s, 16.4mm/s, 19.5mm/s, 22mm/s, 25.8mm/s), ultra low noise and stable movement, suitable for time lapse/macro/low angle video shooting.
• The front wheel can be left and right rotated 90°, so that you make the dolly move in straight line, circle route and opposite direction to achieve special shooting effect.
• Come with a 2.4G remote control, you can change the moving direction and speed easily by the remote control; and there are control buttons on the dolly also.
• The dolly body is made of high quality aluminum alloy material, max. 4kg/8.8lbs load capacity, can be used with smartphone, action camera, digital camera, DSLR camera, etc.
• With a 650mAh rechargeable battery that can offer up to 8h working under mobile phone load(0.8h under max. load); can be conveniently recharged by the included USB cable.

User questions & answers

Question:	Can the front wheel screw be loosened? It won't seem to budge
Answer:	Yes. You do it with a screwdriver but there's enough "looseness" to turn the wheel to the exact degree of arcing that you need.
Question:	Would it work with Android Bluetooth
Answer:	No.

Product features

Specifications:

Material: Aluminum Alloy

Max. Load Capacity: 4kg / 8.8Lbs

Speed: 11.8mm/s, 16.4mm/s, 19.5mm/s, 22mm/s, 25.8mm/s

Noise DB: 60db

Circle Route Running Range:（Front wheel turn right angle-driving radius）

- 10° - 450mm - 20° - 210mm - 30° - 135mm - 40° - 75mm - 50° - 40mm - 60° - 12mm

Battery: 3.7V 650mAh 14430 Rechargeable Battery (Built-in)

Battery Life: 0.8h at maximum load; 8hrs for smartphone

Product description

Each swivel track wheel assembly comes with four track wheels (4-wheels) for maximum stability and each castor wheel has 360° swivel and locking mechanism.

These wheels are not only full 360° swivel, but also able to freely slide within the wheel housing in any direction by an extra 1".

This means that the track can be as uneven as 2" in places and still not effect the smooth operation.

• 360° swivel and locking mechanism
• Aircraft Grade Aluminum / Each assembly can hold up to 200lbs
• M10 Camera Tripod Wheel Screw
• 1x Track Wheel Set $39 - No tripod or dolly included
• These track wheels attach to most standard floor dolly systems

User questions & answers

Question:	I'm wanting to use them on a diy riding dolly. one on each corner. thoughts
Answer:	It should work okay but I would use six not four - three on each long side. Here is a link to a pic pf one I used for a short film. https://pin.it/wb67gngxqd4kyd
Question:	Is this a set of 3 or just one
Answer:	It only comes with 1...? Not really a “set” then is it...?
Question:	Does this only come with the wheels or is everthing seen on the picture included
Answer:	Only one set of wheels
Question:	What size track does it work with, min diameter - max diameter
Answer:	We rec commend 1 to 2 inch diameter tracks

Product description

The Glide Gear Dev Dolly is a professional grade Slider system. The custom designed base plate and friction less wheel platform provides glass-like movement while tracking subjects. Two 4 ft 6061 Aircraft grade aluminum rails lock in the our custom tripod mounts to provide a wide range of sliding shots with various focal lengths. The base plate has several 1/4-20 and 3/8 taps for mounting accessories and supports 50lbs depending on your tripod’s weight capacity.

• 28 mounting holes on the sled for accessories / Sled size: 10" x 11" x 1/4" (27cm x 28cm x 7mm)
• Track diameter: 1.25" (3.2cm) / Track spread: 10" (25cm)
• Tripod Mounting Threads: 1/4"-20, 3/8"-16
• Box Dimensions:49.5 x 13.0 x 4.5" Weight: 12lbs (5.5kg)

User questions & answers

Question:	How much weight can the tracks hold? could you use a red camera with this
Answer:	On the ground it will hold up to 100 lbs... On tripod it will depend on the quality of your tripod.Regards
Question:	Will these wheels work on 1 1/2 and 1 1/4 inch rail? Or are they specific to a certain rail width
Answer:	Clamps on the spacer will only accommodate 1 1/4 rails
Question:	Could this work with a manfrotto mvh502a 502 video head with 75mm half ball
Answer:	You'll need a 75mm bowl mount riser. Just attach that to the 3/8 screw on the platform and you're done. Just keep in mind it'll raise the working height of the camera about 5-6".
Question:	Does it come with the two tripods
Answer:	No, it is just the slider and rails. But, it is a sturdy, well build unit. I run a Canon C500 with monitor and batteries and it holds the weight well.

• [REMOTE CONTROL BATTERY CAN BE USED UP TO 60,000 Times]: The wireless remote control can change camera slider speed & start & pause and drive backwards; The dolly itself has control keys too; Can control effective distance 6m/19.7ft; An perfect auto dolly for time lapse/macro/low angle /360 degree video shooting.
• [3 SPEED ADJUSTABLE WHEEL]: Car dolly wheel angle can make 180 degree adjustable, and 3 speeds adjustable (1.4cm/s 2.4cm/s 3.0cm/s)，you can achieve creative Curve/straight line movement with different speeds, wirelesss camera video auto dolly as well can achieve pitch shooting through ball head.
• [ALUMINUM ALLOY MATERIAL,STRONG LOAD-BEARING]: Motorized trailer dolly is made of high quality material, can support up 3kg/6.6lbs load. Pocket size and lightweight, Autodolly Electric Slider just only the size of the palm of your hand, easy to carry.
• [ 2 COVERTIBLE SCREW&PHONE HOLDER]1/4 inch to 3/8 inch convertible screw is suitable for most camera/smart phone holder. Motorized camera slider for Canon Nikon Sony DSLR Camera to time lapse/macro/low angle /360 Degree video shooting with Phone Holder.
• [BUILT-IN BATTERY]: 3.7V 1800mAh Rechargeable Li-ion Battery (Included) can offer up to 6 hours service time.Package include：1* Auto camera dolly+1*Remote control with Battery+1*Phone Holder+1* Wheel Ring+1*Wrench+1 * USB Cable.

User questions & answers

Question:	Is it worth?how about the quality
Answer:	Worthly， this car dolly is good for straight and swivel Shooting.Aluminum alloy marterial，it is also good quality.
Question:	What's the decibel level of the motors & is it noticeable on a camera mic
Answer:	Your mic will pick up the sound of the motor. But it's never mind for me.
Question:	Can this camera dolly be used without the motor ? Such as putting the motor in neutral and moving by hand
Answer:	/Duration -:-Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } No, there's no neutral option. And here we would like to show you a video of camera dolly.IF you have any problem,please contact us.We will always be with you.
Question:	Hi can this be used with a sluder track?if so any recomnendations on model
Answer:	The slippery rails of carbon fiber are the most suitable.As for size, there is no limit, because the autodolly can be adjusted

Product description

Note: Camera, tripod and ball head are NOT included.

Description:

The Carbon Fiber Camera Track Slider Rail helps you with smooth movements and professional feeling in video making and photography.

We upgrade the product with U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes, to achieve stability and quietness when used to filming.

6 U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes.

2 threaded holes at each end of the track to mount tripod for vertical shooting.

5 threaded holes in fixed plate to mount tripod for horizontal and even 45-degree shooting.

4 threaded holes in slider plate to mount other accessories such as magic arms to enrich your photo quality.

Foldable legs for less a burden, easier portability and quicker set up time.

Leg position is adjustable in large scale for demanding filming task.

Gear-shaped joint interface and locking knobs for better position locking.

Height of legs could be adjusted from 8.5cm to 10cm.

Universal slider plate with a 1/4"" threaded hole to hold most DSLR cameras. (Even comes with a 1/4"" to 3/8"" screw)

Locking knob aside to lock down the slider plate.

Partly hollowed out for more scientific way to load.

Round rubber pad to avoid scratches to your camera's bottom.

A bubble level to indicate your slanting degree.

Comes with a convenient carrying bag, easy and carry, transport and store.

Specifications:

Color: Gold

Material: Carbon Fiber

Length of Track: 31.5 inches/80 centimeters

Maximum Leg Height: 3.9 inches/10 centimeters

Minimum Leg Height: 3.3 inches/8.5 centimeters

Load Capacity: 17.5 pounds/8 kilograms

Package Contents:

1 x 80cm Carbon Fiber Track Slider Rail

1 x Carrying Bag

• 6 U-shaped Ball Bearings: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes
• Flexible Uses: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head
• ulti-Angle Shooting: Available for vertical, horizontal and 45 degrees shooting by using the threaded holes in the slider
• Adjustable and Secured Legs: Height of legs could be adjusted from 8.5 centimeters to 10 centimeters; Gear-shaped joint interface and locking knobs for better position locking for the legs
• Convenient Carrying Bag: Easy and carry, transport and store; Excellent company for video making

User questions & answers

Question:	What is the diameter of the carbon fiber rods
Answer:	3/4"
Question:	Is this wide enough for neewer 3-wheels wirelesss camera video auto dolly
Answer:	Yes it is
Question:	is there a way to somehow flip the 4 legs over and add 4 long legs to turn it into a overhead camera slider gig
Answer:	The legs actually loosen and can spin around 360°, so you can position the existing legs however you want, and tighten them into position. Then, the adjustable feet of the legs simply unscrew all the way out, and you could then screw back into those threaded holes whatever you want (of the same size/threading, of course), if you can create some sort of longer legs to attach. I do wonder how you'd do all that and keep it stable, but in theory anyway, you do have options.
Question:	what is difference between red one and this one? only color
Answer:	I owned the 80cm slider which similar to the 60cm with a folding feet. The difference I can see from the red slider you are referring to is the size. The red one is only 40cm which is good for short slide and very portable but the feet are fixed (do not fold).

Product features

Neewer 31.5"/80 cm Carbon Fiber Camera Track Slider Video Stabilizer Rail

Stable and smooth: U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes

Multi-use: The track can be used on the ground or worked with tripod. It can be directly connected with camera, or indirectly connected with camera via ball head

Multi-angle shooting: Available for vertical, horizontal and 45° shooting by using the threaded holes in the slider

• True Professional NEXT GENERATION DOORWAY DOLLY System – Flexible Enough To Be Rigged For Any Production
• REMOVABLE SIDE BOARDS - Allows Resizing the Dolly - as per convenience; SWITCHABLE SEATING POSITION - Allows Four Seating Options – with seat adjustment quality
• REAR-WHEEL CONVENIENCE – with Push/Pull Steering Bar - offers Greater Turning Flexibility & Full Range of Movement
• PNEUMATIC WHEELS - Run In Any Direction – For Use on Ground, with payload up to 500kg/1100lb
• 100% Customer Satisfaction Guarantee, Buy with Confidence

User questions & answers

Question:	Can the seat be run very low in cantilever style swiveled off side of the dolly
Answer:	Yes, it does go low when the seat swings outside the dolly.

Product features

Personalize It

Quad Dolly can be equipped with Skateboard Wheels or Standard Track Wheels for use on tracks or Pneumatic Wheels for standard floor use. You can use a tripod, a bazooka, a slider, or any other standard Euro Mount Accessory and configure it your needs.

Strongest Platform Dolly

The Quad Dolly has an extremely solid Chassis Design, and the upper base is made of Solid Wood with high-quality finish. This makes it extremely robust and can easily handle payloads of up to 500 kg/1100 lb.

Low For The Best Perspective

The platform height of the Dolly is merely 21cm/8" from the ground. We wanted to make it as low as possible to help you capture those low shots very easily.

Manoeuvres on Small Sets Like no Other Platform Dolly

We designed the Quad Doorway Dolly while keeping mobility and easy operation in mind. With an All-wheel steering system, the Proaim Quad Dolly maneuvers on small sets like no other platform dolly. It's capable of negotiating an extremely tight circle of 2 m (6 ft). Steering Push bar allows pushing/pulling the Dolly on the ground with standard or on the track extremely smooth and easy.

Create the Shot you Envision

The Quad Dolly can be configured for use with multiple setups such as slider, jibs, tripods, and geared heads which enables you to bring the director's vision to reality. We offer multiple accessories at highly affordable prices so that you can calibrate the Dolly exactly to your needs.

The Most Comfortable Dolly Seat

We understand how tiring a whole day shooting can be. The Quad Dolly comes with a thickly padded cushioned seat which provides exceptionally comfortable seating to the camera operator. The seat mounts in 4 different positions allowing you to achieve a variety of camera angles. The seat is also height-adjustable for an optimal seating position according to the operator.