6 best promaster monopods
Product description
Professional mpv428+ convertible monopod
- Maximum Working Height: 64" / 162.5 cm
- Minimum Working Height: 19.5" / 49.5 cm
- Folded Length: 21 1/4" / 53.9 cm
- Maximum Load: 13 lb / 6 kg
- Monopod Weight: 1 lb 9 oz / .71 kg - 4-Section 28mm Aluminum Leg - Reversible 1/4-20 / 3/8" mounting thread
Product description
Professional mph528 monopod with head (n)
- Built–In Bubble Level
- 360° Panning
- Tensions Adjustment
- 90° Left/Right Adjustment
- 13 Pound Load Max
Product description
- Working Height: 3-15/16" / 10cm- Lateral Tilt: -90 left and right- Panning: 360- Maximum Load: 13 lbs / 6 kg- Plate Type: Quick release with 1/4" - 20 screw- Weight: 12.7 oz / 0.36 kg- Position of the quick release receiver on the head can be switched by 90 degrees
Product description
Features:The PROMASTER MH-02 is designed to offer full lateral movement as well as smooth panning ability of your camera when mounted to a monopod. Each head is precision machined from high quality alloy material and is finished with a maximum attention to detail.+ Full lateral tilt 90 left and right+ 360 Panning with tension adjust and calibration scale+ Precision engineered quick release system+ Bubble LevelSpecifications:+ Working Height: 3 15/16" / 10cm + Lateral Tilt: 90 left and right + Panning: 360 + Maximum Load: 13 lb / 6 kg + Plate Type: Quick release with 20 screw + Weight: 12.7 oz / .36 kg
User questions & answers
Question: | Does it come with the quick release plate? Is it Arca style compatible |
Answer: | Dear friend, Thank you so much for your support on our products. Please kindly this isn't a 2-way audio product. Any further questions, please feel free to contact us via Amazon email or as below. Facebook : Zosi Technology Support Email: [email protected] Support center: https://zositechhelp.zendesk.com/hc/en-us Best regards, ZOSI Technologies |
- 【Compact but Durable】 Premium materials with aluminum, more lightweight, more max load weight.A folded length of 26", weighing only 3.9 lb and max load 13.2 lb , this video monopod kit is ideal for travel and fast moving situations like sporting events,travel and outdoor shooting
- 【Pivoting Mini Metal Tripod】The monopod base enables 360° swiveling, 45° tilting in all directions and 90° drop-notch allows easily switch from landscape to portrait modes; locked in the upright position via its patented Vertical Lock, the removable base can be used as a small table-top tripod
- 【Multi-function Pan Tilt Head】Features pre-set counterbalance, pan/tilt locking with 3/8" easy link connector for accessories, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane
- 【Easy Set Up】This Camera Monopod Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 13.2 lbs. The 5-section aluminum monopod leg extends to 73" fully equipped with ergonomic flip lock providing fast leg extension; by using a supplied Y-style key, the tightness of each flip-lock on the monopod leg can be adjusted according to the respective requirements
- 【Specifications】 8-years warranty | Adjustable Height: 26" to 73" | Tilt Range: -75° to +90° | Pan Range: 360° | Max Load: 13.2 LB | Carrying Bag | Fluid Head | Monopod Leg | 3-Leg Tripod Base and Monopod Travel Bag Included
User questions & answers
Question: | Nikon p1000? Anyone tried with this mono |
Answer: | I have the Sony A7iii camera with 1/4" thread hole that fit with the screw on the monopod. |
Question: | Is there a way to remove the tri-folding feet |
Answer: | Yes it unscrews rather easily |
Question: | I am considering using this with the 360fly 4k, but I'm concerned the pan bar & handle will be in the image; Can the pan bar & handle be detached |
Answer: | The pan bar and handle can be detached (and it actually comes detached), but it can also be adjusted so that it doesn't show up in your image. |
Question: | Is the quick release plate interchangeable with a manfrotto |
Answer: | The Coman plate is NOT compatible with Manfrotto 2" slide clamps, such as the one on the Manfrotto 562B-1. The Coman is a 1 and 13/16th" slide clamp, so it's 3/16" too narrow to use with my Manfrotto clamps. Even when the clamps are fully tightened, the space is still 1/8" too wide, so the plate will slide right off. I'll post pictures with my review. |
Product features
COMAN Professional Camera Tripod
Lightweight, highly durable, quick and easy to set up
KX3232 monopod + Q5 Fluid Head + 3-leg unipod holder to give you a versatile still or video camera support system.
Smooth fluid movements combined with an advanced balancing system – 360° horizontally and +90°/-75° vertically, the best choice for recording with a video camera, camcorder, or DSLR.
Q5 Fluid Head
KX3232 Monopod
Product description
Specifications:
Material : Aluminum
Max Height: 169cm / 66.5 inch
Folded Length: 49 cm
Number of Leg Sections: 4
Legs diameter : Φ31 ,Φ28,Φ25,Φ22(mm)
Monopod top connection screws : 1/4 - 3/8"screw (reversible)
The thread at the bottom of the monopod is: 3/8"screw
Mini Tripod holder Top connection screws : 1/4 - 3/8"screw (not reversible)
Net weight: 1.07kg
Maximum Load: 6kg
Package Includes:
1 x koolehaoda monopod
1 x Mini Tripod holder
1 x Rubber Spikes
1 x Metal spikes
1 x Allen wrench
1 x monopod bag
- :) Extends to height of 66.5 inch. Reversible 1/4- 3/8 screw on the mounting plate
- :)4-section screw leg-locking system for secure height adjustment .
- :)Legs diameter : Φ31 ,Φ28,Φ25,Φ22mm, Monopod Net weight: 1.07kg , Maximum Load: 6kg.
- :)Monopod can be used to alpenstock . It is light and convenient, also give you other choice.
- :)Mini Tripod holder Can be used as a desktop tripod, you can use it on the table photography.
User questions & answers
Question: | Could it be possible to use the monopod in reverse direction fixed to the legs for a better stand |
Answer: | The measurement of the plate is 1and 1/2 inches by 2 and1/4 inches. |
Question: | How long are each of the legs on the support stand? Since the dimensions aren't clearly written out. Thanks |
Answer: | YES ! I use it with my Nikon D3200, and zoom lenses. |
Question: | this is NOT a "quick release" this is a twist lock. Please fix your listing |
Answer: | Yes just have to register your camera. |
Latest Reviews
View all
Remote Control Outlet Switches
- Updated: 11.06.2021
- Read reviews

Mandolin V Slicers
- Updated: 27.02.2021
- Read reviews

Strength Training Smith Machines
- Updated: 31.05.2021
- Read reviews

Dye Hair Dyes
- Updated: 09.01.2021
- Read reviews

Johnson Level Tool Measuring Tapes
- Updated: 27.06.2021
- Read reviews