10 best monopod for cameras

Product description

Description:

This tripod monopod is made of Aluminum Alloy with durable and solid construction.

It is great and helpful for shooting when you travel outdoor, and also can be used as alpenstock.

15 degree tilt of stand base can help monopod achieve 360 degree panoramic rotation.

5-position leg adjustment system provides flexible shooting (25-22-19-16-13mm).

The included stand base can support monopod well, and offers great convenience to adjust different angles when you are shooting.

With its light weight, it is easy to carry when travel outdoor.

Specifications:

Material: Aluminum Alloy, Rubber Pad (Three feet of stand base)

5 section tube Diameter:25-22-19-16-13mm

Load Capacity: 11 lbs/5 kg

Net Weight:1.3 lbs/0.6 kg

Maximum Height: 66"/168 cm

Minimum Height: 20.5"/52 cm

Monopod Top Connection Screw: 1/4"

Monopod Bottom Screw Thread: 3/8"

Package Contents:

1 x Monopod

1 x T222 Stand Base

User questions & answers

Question:	Can this take a fluid head
Answer:	Yes
Question:	What is the purpose of the feet? They cant hold s csmera up
Answer:	The feet are to keep the support upright while you mount the camera. If it didn't have feet you would have to lean it against something. There are monopods that have sharp ends to push into the ground, if you are hiking and want to push into soil but I preferred the one with feet because I might use it in other places.
Question:	I have a panasonic lumix fz-300, but don't see it mentioned in the list of cameras for this monopod. any reason the lumix wouldn't work
Answer:	I don’t even know why there would be a list of cameras, yes it will work
Question:	Is it stable enough to support a small 360 camera at maximum extension without any help
Answer:	yes, although if the ground is not level it is a challenge.

Product description

An Amazon Brand

• Supports video cameras, still cameras, and scopes up to 6.6 lbs.
• 1/4-inch univeral thread mount
• Four leg sections able to extend 67-inches
• Non-skid rubber foot and retractable spikes
• Includes carrying bag
• Built in cushion grip and adjustable wrist strap
• Made of lightweight aluminum weighing less than 1 lb
• Product Dimension: 1.7 x 1.6 x 21.4 inches (LxWxH); 15.7 ounces

User questions & answers

Question:	When you spin the rubber foot "up" can you attach a 3/8" universal monopod base to it
Answer:	I would say "No" based on just looking at it. There is a pointed tip that goes out beyond the threads so I cannot imagine the base being able to thread onto this foot because the rubber movable tip does not come off-it just adjusts for dirt or concrete.
Question:	Can I hold on to the grip and put my camera on the other end to take photos and videos of myself? Also, is this monopod waterproof
Answer:	No its not possible to hold on to the grip and place ur camera at the other end. It doesnt have the functionality to do so. This is not one of those monopods that you can take selfies with. And when you mean it can get wet and will not hinder its functions? Then yes
Question:	What is the collapsed length of the monopod
Answer:	Completely collapsed, the monopod is 21 3/8" long (54.3 cm). When packed in the included case, it's 22" (55.9 cm).
Question:	Can the Non-skid rubber foot be unscrewed (removed) in order to connect to the top of a tripod as an extension
Answer:	The answer is, not easily. The screw isnt threaded all the way. It is push in fitting into the pole. Also the spike is part of the screw. You can rip it out, tap the plastic end cap to accept the 3/8 male to 1/4 female adaptor that come with it and then thread on your tripod foot. It will be extra work and you need threading tools but for $18 you may still come out well ahead. You might also be able to buy a 1/4 stud with the same type push in fitting. I have pictures but no way to post it here.

• LIGHTWEIGHT ALUMINUM DESIGN: Collapses down to a very compact 16.75” and weighs just .59 LBS. Fits neatly into a carry-on or a tote bag and is lightweight enough to stow away in a backpack on a hike with no regrets. Includes carry pouch.
• UNIVERSAL THREAD MOUNT: ¼ inch universal thread to attach any DSLR or mirrorless digital camera, video camera, ball head, or scope up to 5 lbs. Includes a 3/8 inch screw adapter.
• COMFORTABLE GRIP: Features a soft foam grip and safety wrist strap. It’s the ideal stabilizing solution for capturing sharp images and smooth video.
• SAFE AND SECURE: Built-in non-skid rubber foot with retractable leg spike, making it perfect for indoor and outdoor terrain.
• SATISFACTION GUARANTEE: Backed with DIGITAL GOJA 90-Day 100% Satisfaction Guarantee

User questions & answers

Question:	Will this hold with the Zhiyun Smooth 4 with weight Attached
Answer:	The monopod fits cameras with a standard tripod receptacle.
Question:	Does the monopod (sold by itself, not the 6-in-1) have a 1/4-20 thread on the bottom end, where the spike is
Answer:	It comes with the tripod base, an extender rod and 3 of the device holder mounts
Question:	Is this compatible with the Fujifilm finepix S
Answer:	Very pleased I bought it. Well made and easy to use.
Question:	Does it work with Sony A7 mirrorless
Answer:	If it has a standard tripod attachment on the bottom of the camera, it should work. It works on my Sony A58 just like any standard tripod.

Product features

Altura Photo 62-Inch Camera Monopod - Ultra Portable, Heavy Duty Design for Canon, Nikon and Sony

Altura Photo Compact 62-Inch Monopod is constructed from a high quality lightweight aluminum, designed to extend to 62” inches and collapse to a very compact 16.75”. It weighs just .59 lbs, less than any other comparable monopod on the market. This conveniently compact Monopod is intended for photographers who are seeking to capture images on the go without needing to carry or set up a full tripod. An ergonomic soft grip and wrist strap helps ensure comfort and security while shooting. Its flip locks secure its four-leg section in place, and its 1/4” standard universal threaded screw attaches to the tripod mount of most cameras.

Features:

- Lightweight aluminum easy to carry all day

- ¼ inch universal thread also includes 3/8 inch screw adapter

- Ergonomic foam grip and safety wrist strap for greater comfort

- Four section leg locks which extend to a maximum height of 62” and collapse to 16.75”

- Actual weight 0.59lbs.

- Rubber foot with retractable leg spike for indoor and outdoor terrain

- Supports up to 5lbs

• 【Multi-function】: Not only a monopod for cameras, but also act as a walking stick for outdoor use.Ideal for sport interview, travel photography, extreme sports and so on.
• 【Flexible】: Leg locking system offer an adjustable height range of 21.26" (54cm) to 67.32" (171cm).
• 【Material】: 4 sections leg with durable aluminium body, adds up to durability factor along with its benefit of a lightweight structure.ideal support 6.6 pounds of camera and lens. (Without telephoto zoom lens).
• 【Portability】: Compact size of 21.25''(540mm) N. weight:1.19lb(540g). Plus carrying bag and adjustable shoulder strap for convenient delivery.space saving and easy to carry
• 【Application】: Supplied with a standard 1/4 inch tripod screw thread for attaching to camera, video or spotting scope.

User questions & answers

Question:	Can you unscrew the spike and replace it with a 3/8" screw device like a mini tripod
Answer:	I haven’t tested with that camera. However I was looking to get that camera. Might need an adaptor. I’m currently using it with an Sony AX-53 and have no issue. Have you tried just attaching the quick release plate by itself?
Question:	Does it come with a bag
Answer:	please check the screw hole of your manfrotto 502AH is 3/8" or 1/4", the screws of our monopod is 3/8" and 1/4" changeable. It can support both 3/8" and 1/4" screw hole.
Question:	On the 67" k&f monopod, can the "spike foot" be removed to attach a 1/4" o 3/8" screw of a mini tripod? thanks
Answer:	It should. I use it with the Ricoh Theta V 360 camera all the time and love it. It’s the best monopod I have ever used!
Question:	Is this really good for hiking
Answer:	It is working perfectly with My Pilotfly h2.
Question:	how difficult should the quick reales be to screw into sony A7iii? Does not seem to want to go on straight for me
Answer:	yes, they do come with lens caps.
Question:	Is the Manfrotto 502AH too big for it
Answer:	I don't know how much time Amazon allows for damaged purchases to be returned. I sugges that you get in touch with Amazon and find out about their return policy and take it from there.
Question:	Does this work as a monopod for the Go Pro 360 Max
Answer:	Here is a link on how to do it.http://www.astronomyforum.net/binoculars-forum/201622-collimating-pair-barska-15x70-binocs.html
Question:	will this work with zhiyun Crane
Answer:	HiYes. These belong to the "Big" binoculars group used in astronomy. They compare to other makes like Orion,Celestron,Meade and expensive brands. This group can be terrestrial and astronomical . If you get the right quality pair, you might be pleased with constellation and clusters views; and even large enough galaxies. I returned mine because I couldn't get them collimated successfully, so I saw doubles everywhere. On the moon you will see colored "halos" due to optics but that will minimize if collimated correctly. I strongly suggest to read reviews about this pair , and others, and acquire background on binocular collimation to help you decide. Also note one seriously important consideration, and that is mounting and hand holding. This by itself can dictate your choice. Good luck

Product features

IFOOTAGE Cobra 2-C180

Lightweight, highly durable, quick and easy to set up -- IFOOTAGE offers three adjustable feet and IFOOTAGE’s patented quick release system on our new 3-in-1 monopod. One minute it’s a true monopod reseting on its removable rubber foot, the next it’s standing tall on it’s own three feed allowing 360° controlled movement via its tension control/lock at its base. Traditional tripods now have a serious rival!

• 【Compact but Durable】 Premium materials with aluminum, more lightweight, more max load weight.A folded length of 26", weighing only 3.9 lb and max load 13.2 lb , this video monopod kit is ideal for travel and fast moving situations like sporting events,travel and outdoor shooting
• 【Pivoting Mini Metal Tripod】The monopod base enables 360° swiveling, 45° tilting in all directions and 90° drop-notch allows easily switch from landscape to portrait modes; locked in the upright position via its patented Vertical Lock, the removable base can be used as a small table-top tripod
• 【Multi-function Pan Tilt Head】Features pre-set counterbalance, pan/tilt locking with 3/8" easy link connector for accessories, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane
• 【Easy Set Up】This Camera Monopod Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 13.2 lbs. The 5-section aluminum monopod leg extends to 73" fully equipped with ergonomic flip lock providing fast leg extension; by using a supplied Y-style key, the tightness of each flip-lock on the monopod leg can be adjusted according to the respective requirements
• 【Specifications】 8-years warranty | Adjustable Height: 26" to 73" | Tilt Range: -75° to +90° | Pan Range: 360° | Max Load: 13.2 LB | Carrying Bag | Fluid Head | Monopod Leg | 3-Leg Tripod Base and Monopod Travel Bag Included

User questions & answers

Question:	Nikon p1000? Anyone tried with this mono
Answer:	I have the Sony A7iii camera with 1/4" thread hole that fit with the screw on the monopod.
Question:	Is there a way to remove the tri-folding feet
Answer:	Yes it unscrews rather easily
Question:	I am considering using this with the 360fly 4k, but I'm concerned the pan bar & handle will be in the image; Can the pan bar & handle be detached
Answer:	The pan bar and handle can be detached (and it actually comes detached), but it can also be adjusted so that it doesn't show up in your image.
Question:	Is the quick release plate interchangeable with a manfrotto
Answer:	The Coman plate is NOT compatible with Manfrotto 2" slide clamps, such as the one on the Manfrotto 562B-1. The Coman is a 1 and 13/16th" slide clamp, so it's 3/16" too narrow to use with my Manfrotto clamps. Even when the clamps are fully tightened, the space is still 1/8" too wide, so the plate will slide right off. I'll post pictures with my review.

Product features

COMAN Professional Camera Tripod

Lightweight, highly durable, quick and easy to set up

KX3232 monopod + Q5 Fluid Head + 3-leg unipod holder to give you a versatile still or video camera support system.

Smooth fluid movements combined with an advanced balancing system – 360° horizontally and +90°/-75° vertically, the best choice for recording with a video camera, camcorder, or DSLR.

Q5 Fluid Head

KX3232 Monopod

Product description

Avella C325 Compact Monopod is constructed from a high quality lightweight Carbon Fiber, designed to extend to 58.6" inches and collapse to a very compact 16.5".



Ultra light-weight construction and able to support up to 6.6 lbs 5 leg sections and extendable flip locks legs with non-skid rubber tip feet, built-in adjustable wrist strap, includes tripod bag.



An ergonomic soft grip and wrist strap helps ensure comfort and security while shooting. Its -3/8"-16 / 1/4"-20" standard universal threaded screw attaches to the tripod mount of most cameras.



★Feature



Lightweight aluminum for easy mobility.

Ergonomic quick-snap locks for quick setup.

3/8"-16 / 1/4"-20 Head mounting plate compatible with most tripod heads or cameras

Rubber foot with retractable leg spike for indoor and outdoor terrain.

Built-in wrist strap prevents monopod from falling from hand.



★Specifications



Material: Carbon Fiber

Number of leg sections: 5

Maximum operating height: 58.6 inches

Minimum operating height: 16.5 inches

Folded height: 16.5 inches

Max operating load: 6.6 lbs

Net weight: 1.1 lbs



★ Package listing:



1x C325 Carbon Fiber monopod Leg

2 x Hex Keys

1 x Metal Spikes

1x Shoulder bag

• ☑Multi-function: Not only a monopod for cameras, but also act as a walking stick for outdoor use.Ideal for sport interview, travel photography, extreme sports and so on.
• ☑ Lightweight Carbon Fiber design: Collapses down to a very compact 16.53” and weighs just 1.1 LBS. Fits neatly into a carry-on or a tote bag and is lightweight enough to stow away in a backpack on a hike with no regrets.Leg locking system offer an adjustable height range of 16.53" (42cm) to 58.66" (149cm).
• ☑Material: 5 sections leg with durable Carbon Fiber body, adds up to durability factor along with its benefit of a lightweight structure.
• ☑COMFORTABLE GRIP: Features a soft foam grip and safety wrist strap. It’s the ideal stabilizing solution for capturing sharp images and smooth video.
• ☑SAFE AND SECURE: Built-in non-skid rubber foot with retractable leg spike, making it perfect for indoor and outdoor terrain.

User questions & answers

Question:	My apologies is I missed this. Does this come with a bag
Answer:	Yes, this does come with a carry bag.
Question:	Can use it for gopro
Answer:	I don’t have a go pro, but is very versatile it was a good purchase.
Question:	As a walking stick can it hold your weight if you need it to get up or keep from falling
Answer:	Yes, I just used it as a walking stick on my recent trip to Hawaii. You need to make sure the screws are tightening firm enough that the clips hold each section firmly. Ultimately you don’t want to put a lot of weight on this... it can only handle the weight the manufacturer designed and specified on the product page.
Question:	How much does it weigh
Answer:	Not sure but it's not heavy and not bulky - I just stick it on the side of my backpack. And I really like the quality.

Product description

Tripod and Monopod Combined Unit



Foam Hand Grip for comfortable hold, Carrying bag included. Takes about 30 seconds to unscrew the screw from the tripod and get the monopod, you will get one trekking pole while in travel. Screw the two ends of the monopod to the tripod and connect the two part, you will get the center column of the camera tripod.





Upgraded all-in-one Tool for Camera/Mobile Phone



The phone holder designed perfectly hidden under the quick release plate and it can be pulled out according to the instructions after removing the quick release plate, so the tripod can be quickly converted into a smartphone mount. No more scattered parts, more convenient.





Lightweight & Load Capacity



This camera tripod is mainly designed for travel, the height of this camera tripod can be adjusted from 12.6" To 70" with 3 sections and 3 quick Flip locks for each single column. It only 2.6lb but could withstand 6.6lb load.





360 Panorama Tripod Head



The pan and tilt tripod enables the camera to change from horizontal view to vertical view within seconds. This camera tripod can be rotated 360° at horizontal direction and 90° at vertical direction.

Specification



Material: Aluminum Alloy



Min Tripod Height: 10.6 inches



Max Tripod Height: 70 inches



Min Monopod Height: 15.4 inches



Max Monopod Height: 50.8 inches



Tilt Range: 180 degree



Panning Range: 360 degree



Tripod Weight: 1.63 LB



Monopod Weight: 0.61 LB



Maximum Tripod Load Capacity: 8.8 LB



Maximum Monopod Load Capacity: 6.6 LB

Package Contents:



1 x Aluminum Alloy Camera Tripod



1 x Monopod



1 x Carrying Bag



2 x Screws



1 x Trekking Pole Bottom Part

.

• 【Lightweight & Portable 】 Camera tripod with a weight of 2.6lb and folded only 12.6inches long, comes with a convenient bag to carry. The unique monopod for cameras can support taking pictures from different angles. Whatever you handle as a selfie stick or other supporting, it will make you feel amazing for its function which can expand from 15inches to 50inches.
• 【Adjustable-height Matches Your Needs】 The camera stand can expand from 25.9 inches to 69.6 inches, which is suitable for children and adults. universal 1/4 screw can support most cameras like Canon Nikon which can take photos and videos, live broadcast, facetime, do the vlog, self-taking.
• 【Convenient Operation Design】 Takes only 30 seconds to go from the tripod to monopod. And as the phone holder designed perfectly hidden under the quick release, the camera tripod can be quickly converted into a phone mount via removing the quick release plate. Sturdy aluminum alloy tripod legs with rubber pads can kee stable and protect tripod from being worn in harsh environments.
• 【Smooth 360 Panorama Tripod Head】Pan head with 360-degree rotation and freely adjustable angles allows you to take panoramic photos/videos without limitations. Quick Release Plate is equipped for change of scenes. Adjustable-height tripod can make this tripod as a table camera stand to help you take pictures of scenes from multiple angles.
• 【Meet Most of Your Requirements】Not recommended for use with heavy camcorder or camera when fully expand this camera stand, the total equipment weight should not exceed 8.8 pounds. It can sustain 6.6 pounds camera under a fully expand situation. It supports most camera/video devices including digital camera, DSLR, SLR, action camera, GoPro, webcam, binoculars, ring light camcorder, Canon, Nikon, Olympus, and Smart Phones.

User questions & answers

Question:	Is the head made of aluminum as well, or is it plastic
Answer:	no, it does have a rubber foot that threads down to cover the spike for using it on solid. ground
Question:	Can this go on a sony trv308 camcorder
Answer:	Yes. It’s a sheath that won’t fit anything more than the monopod. The bag has a strap you can probably loosen to provide enough slack to sling over your shoulder but I’ve never used the strap so it’s still as tight as when it arrived.
Question:	I got the monopod, but no tripod. Is there a separate shipment that will have the tripod? Did yours get delivered all at once
Answer:	No, it can’t be removed but it has a rubber foot that is threaded over it. If you don't want the spike you simply rotate the foot on the threads downward and it will cover the spike
Question:	Can a different ball head be attached
Answer:	I weigh 260, it is useful for hiking. It extends taller than some walking sticks.

Product features

Specification:

• Min Tripod Height: 10.6 inches
• Max Tripod Height: 70 inches
• Min Monopod Height: 15.4 inches
• Max Monopod Height: 50.8 inches
• Tripod Weight: 1.63 LB
• Monopod Weight: 0.61 LB
• Maximum Tripod Load Capacity: 6.6 LB
• Maximum Monopod Load Capacity: 4 LB

3 Way Head for Easy Operation

* 3-way swivel pan head can let you freely adjustable angles which allows you to take photos, videos, livestreams without limitations

* Universal 1/4” screw can support most Canon Nikon Sony DSLR Camcorder and phones

Adjustable Trekking Poles

* Multi-function tripod can be used as a monopod, selfie stick or walking stick.

* Maximum monopod height: 50.7 inches/129.3 centimeters

* Minimum monopod height: 15.3 inches/38.9 centimeters

Convenient Phone Holder Design

* The phone holder designed perfectly hidden under the quick release plate which can be pulled out after removing the quick release plate

* Exclusive patent, no more scattered parts, more convenient. Good choice for photographers, enthusiasts, beginners, and travelers.

Selfie Stick

This lightweight camera tripod is also can be used as a selfie stick. When you go out for travel, you don’t need to take many tools to take photos. This multi-function tripod can meet all your needs.

Trekking Poles

Adjustable trekking poles can support different a mountaineering with different degrees of bending. You don't need to worry about the rugged mountain road if you want to More challenging place.

Easy to Carry and Storage

The lightweight camera tripod can be expended from 25.9 inches to 69.6 inches. It weighs only 2.6 pounds and won’t take up many space . Adjustable-height tripod can help you take more beautiful landscapes.

• 📹 Red Dot Design Award Winner: IFOOTAGE Corba 2 Series Monopods; 2017 Red Dot Design Award Winner (product design award); designed for easy operation and longevity. This monopod is ideal for travel and outdoor shooting.
• 📹 Detachable Design: 4 section design allows for flexibility in use. Our award winning quick release plate and removable trippod stand provide 3 options: 1) Fixed video monopod with adjustable feet, 2) Portable monopod, 3) Low angle camera pod for a variety of uses.
• 📹 Telescopic design: Award winning buckle design make it to easy extend from 5.3 inches to 71 inches. Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 22 lbs. Premium materials with Carbon fiber, more lightweight, more max load weight.
• 📹 Pivoting Tripod: The monopod base enables 360° swiveling, 90° tilting in all directions and allows easy switches from landscape to portrait modes.
• 📹 Quick Lock and Unlock Release: Single hand operation. No buttons, no twisting, just a simple slide down to release and slide up to lock.The perfect suitable fluid head with ASIN: B07GR211GZ.

User questions & answers

Question:	how difficult should the quick reales be to screw into sony A7iii? Does not seem to want to go on straight for me
Answer:	I haven’t tested with that camera. However I was looking to get that camera. Might need an adaptor. I’m currently using it with an Sony AX-53 and have no issue. Have you tried just attaching the quick release plate by itself?
Question:	Is the Manfrotto 502AH too big for it
Answer:	please check the screw hole of your manfrotto 502AH is 3/8" or 1/4", the screws of our monopod is 3/8" and 1/4" changeable. It can support both 3/8" and 1/4" screw hole.
Question:	Does this work as a monopod for the Go Pro 360 Max
Answer:	It should. I use it with the Ricoh Theta V 360 camera all the time and love it. It’s the best monopod I have ever used!
Question:	will this work with zhiyun Crane
Answer:	It is working perfectly with My Pilotfly h2.

Product features

IFOOTAGE Cobra 2-C180

Lightweight, highly durable, quick and easy to set up -- IFOOTAGE offers three adjustable feet and IFOOTAGE’s patented quick release system on our new 3-in-1 monopod. One minute it’s a true monopod reseting on its removable rubber foot, the next it’s standing tall on it’s own three feed allowing 360° controlled movement via its tension control/lock at its base. Traditional tripods now have a serious rival!

Product description

Super innovative, portable and intuitive. The compact extreme 2-in-1 monopod and pole with GoPro® adaptor makes short work of even the trickiest shoots, plus it’s designed to give you ultimate portability along with great usability. In fact, this photo monopod has been made to perfectly suit compact system cameras, so you can be absolutely sure it’s up to the challenge, whatever the job entails. And thoughtful touches like a rounded handgrip and a wrist strap keep your gear safe, while giving you all the freedom you need to work fast. this super clever photo monopod is also lightweight, and incredibly compact. It weighs only 11.36oz, making it an ideal addition to any kitbag, and it’s made from 4-sections. These 4-section tubes are crafted from aluminum and adaptor making this photo monopod strong as well as easy to carry. It can lift up an impressive 2.2lbs, and has a rubber foot for extra grip and stability. Once up, you don’t need to take this smart photo stand down to change position either, the foot can easily be moved to capture new angles. versatility is another of this ingenious monopod’s strong suits. A standard ¼” thread on top and underneath allow you to change the configuration of the stand in a jiffy, with just a few simple actions. This gives you extra freedom to work fast and smart. And in one innovative move, a small aluminum ball head moves from the top of the handgrip to the bottom of the tubes, so you’ll never be hampered. This photo stand can easily turn into a pole when you need to reach greater heights too, and comes with a GoPro® adaptor, making it adaptable to a whole range of cameras.

• Clever pole that turns into a photo monopod
• Sturdy aluminum and Adaptor 4-section tubes
• Change configuration fast from the top or bottom
• Comes complete with a small aluminum ball head
• Includes universal thread attachment

User questions & answers

Question:	Has anyone tried using this with a gopro max? i'm wondering if i can get the invisible selfie stick look. im wondering if the clips will show in shot
Answer:	Yes.
Question:	Hoping to use this for a speedlight, would it work
Answer:	As long there is no strong wind no problem, if wind a couple of stones or sandbags solves the problem
Question:	Can i replace the ball mount with another tilt head like this? https://www.amazon.com/manfrotto-234-monopod-tilt-replaces/dp/b000khz8aa
Answer:	I use that one and it works just fine.
Question:	How to connect a mini tripod to make it stand? both upper and lower mount are male, not female
Answer:	I use a short barrel female to female connector

Product features

Stabilize your shot!

It's a solid lightweight aluminum monopod comes with a ball head that support mirrorless camera within 2.2lbs

Take perfect Selfie!

Turn it to selfie pole that extends to 52 in and get the best travel shot for instagram

Create amazing video!

Attach your GoPro with the supplied GoPro adapter and shoot amazing action shots

Switch between monopod & pole in seconds

Change configuration quickly by switching the position of the camera attachment from top to bottom.

Multiple Configurations - Monopod

Mix and match with the detachable ball head, GoPro adapter and rubber foot to create your perfect monopod

Multiple Configurations - Camera Pole

Mix and match with the detachable ball head, GoPro adapter and rubber foot to create your perfect camera pole

Experience Italian Design Product

The Manfrotto Compact Xtreme pole is a reddot award 2016 winner for it's clever design

Product description

Description:



Note: Camera is not included.



Compatible with Canon Nikon Pentax Sony Fuji Lumix Olympus DSLR and Video Camcorder through reversible 1/4inch-3/8inch screw on the mounting plate, can be adjusted from 1/4inch-3/8inch by unlocking the plate and put the screw upside down.



Carbon Fiber constructions, light weight and durable, designed for stabilizing your equipment in different occasions. Can also be converted as alpenstock if needed.



5 leg sections with twist locks anti-rotation system to offer an adjustable height from 18.9 inches/48 centimeters to 64.2 inches/163 centimeters.



Non-slip foam rounded handgrip and wrist strap ensure a safe hold and avoid risk of camera dropping.



Except the non-slip rubber for flat ground, it also comes with a screw-in metal spike for easy installation and enhances stability on dirt, grass, and other uneven terrains.



Specifications:



Main Material: Carbon Fiber



Section: 5



Tube diameter: 28-25-22-19-16 millimeters



Reversible Screw: 1/4inch-3/8inch



Folded Length: 18.9 inches/48 centimeters



Extended Length: 64.2 inches/163 centimeters (Max.)



Load Capacity: 22 pounds/10 kilograms



Weight: 0.75 pounds/0.34 kilograms



Package Content:



1* Neewer Carbon Fiber Monopod



1* Carrying Bag



1* Metal Spike

• WIDE COMPATIBILITY: with reversible 1/4inch-3/8inch screw, accepts almost all Canon Nikon Pentax Sony Fuji Lumix Olympus DSLR and Video Camcorder
• LIGHTWEIGHT AND DURABLE: Made of lightweight 8X carbon fiber, weighs only 0.75 pounds/0.34 kilograms but with loading capacity up to 11.02 pounds/5 kilograms
• EXTENDABLE HEIGHT: 5 leg sections with anti-rotation twist locks to enhance stability, height from 18.9 inches/48 centimeters to 64.2 inches/163 centimeters
• ERGONOMIC DESIGN: Non-slip foam rounded handgrip and wrist strap ensure a safe hold and avoid risk of camera dropping
• PERFECT TRAVEL COMPANION: Removable non-slip rubber mat and screw-in spike for different shooting occasions, carrying bag offered for convenient travelling around

User questions & answers

Question:	can you put a Manfrotto plate? Thank you
Answer:	the pole have both 1/4 and 3/8 and is so far a good investment with the ball head I add to it
Question:	Is this compatible with the dji ronin s
Answer:	The price will tell you: Aluminum model sell for $60; the Carbon fiber model sells for $100.
Question:	Is the attaching hole in the base 1/4" or
Answer:	15-1/2" collapsed, 61" at full extension. Excellent quality unit.
Question:	What is a good very lightweight and stable base to use wit this (ideally carbon fiber
Answer:	I would think that it should be sturdy enough. The reason I purchased this monopod was because it was so compact. Really glad that I purchased it.

Product features

Neewer Carbon Fiber Monopod - 5 Sections 19-64 inches/48-163 centimeters Adjustable Portable Stand with Carrying Bag

• With reversible 1/4"-3/8" screw, this monopod accepts almost all Canon Nikon Sony Fuji Olympus DSLR cameras, Video Camcorder, led video lights.
• Made of lightweight 8X carbon fiber, weighs only 0.75 pounds but with loading capacity up to 22 pounds.
• 5 leg sections with anti-rotation twist locks can enhance stability.
• Non-slip foam handgrip and wrist strap ensure a safe hold.
• Removable non-slip rubber mat and screw-in spike in the foot for different shooting occasions.