14 best aw monopods

Product description

Lowepro Whistler Backpack 450 AW II (Gray)

• The gray Whistler Backpack 450 AW II from Lowepro is a heavy-duty bag designed to comfortably and securely carry your large mobile photo studio.
• The spacious main compartment features an adjustable partition system that can hold a large DSLR with an attached 70-200mm lens, eight additional lenses, and a shoe mount flash or additional lens.
• Users of mirrorless camera systems can fit up to ten lenses along with a camera, a flash or additional lens, as well as a backup camera, and for protection of foldable drones and their flight controllers, two padded inserts feature enhanced cushioning.

Items Included With Your Purchase:





Lowepro Whistler Backpack 450 AW II (Gray)

10 x Divider

2 x Drone Insert Pad

Rain Cover



64GB Memory Card

Cleaning Kit

Memory Card Wallet

USB Card Reader

Lanyards

Lens Cap Keeper

Leuchtturm Medium A5 Ruled Hardcover Notebook (Black)

Leuchtturm Pen Loop (Black)

72 Inch Tripod

Monopod 70 inch

160 LED Video / Photography Light

• Holds DSLR and 10 Lenses. Padded Touch-Fastened Interior Dividers.
• Dedicated, Padded 15" Laptop Pocket. Padded Inserts for Drone Kits.
• The gray Whistler Backpack 450 AW II from Lowepro is a heavy-duty bag designed to comfortably and securely carry your large mobile photo studio.
• The spacious main compartment features an adjustable partition system that can hold a large DSLR with an attached 70-200mm lens, eight additional lenses, and a shoe mount flash.
• Bundle Includes: Lowepro Whistler Backpack 450 AW II (Gray) - 10 x Divider - 2 x Drone Insert Pad - Rain Cover - 64GB Memory Card - Cleaning Kit - Memory Card Wallet - USB Card Reader - Lanyards - Lens Cap Keeper - Leuchtturm Medium A5 Ruled Hardcover Notebook (Black) - Leuchtturm Pen Loop (Black) - 72 Inch Tripod - Monopod 70 inch - 160 LED Video / Photography Light

User questions & answers

Question:	how difficult should the quick reales be to screw into sony A7iii? Does not seem to want to go on straight for me
Answer:	It is Li-battery and it can be used about 15 hours.
Question:	Is the Manfrotto 502AH too big for it
Answer:	Hi Brenda, So sorry to get back to you so late. Yes, through the bluetooth it does take video. You just have to switch it to video on your phone.
Question:	Does this work as a monopod for the Go Pro 360 Max
Answer:	if you can hold a 2 cell flashlight out in front of you, you can hold this. It's lighter than a flashlight but the specific wrist stress you encounter depends on the amount of extension you want, the weight of your smartphone and how long it takes you to set up your "SELFIE". This mechanism only weighs 6.4 ounces by itself.
Question:	will this work with zhiyun Crane
Answer:	Hi Gualberto Rivera,Yes, your iPhone 6plus with an otter box cover will fit into the Selfie Stick clamp. Please write this as helpful if you get the chance! Thanks so much!Kannon Gowen

Product features

IFOOTAGE Cobra 2-C180

Lightweight, highly durable, quick and easy to set up -- IFOOTAGE offers three adjustable feet and IFOOTAGE’s patented quick release system on our new 3-in-1 monopod. One minute it’s a true monopod reseting on its removable rubber foot, the next it’s standing tall on it’s own three feed allowing 360° controlled movement via its tension control/lock at its base. Traditional tripods now have a serious rival!

Product description

This padded tripod bag will help keep your for 3036, 3046 and 3051 series tripods protected. Constructed from heavy duty Cordura nylon this not only helps protect, but also makes carrying much easier with the handles or shoulder straps. An outside pocket is perfect for carrying extra quick release plates or other items. 3036, 3046 and 3051 series tripods

• Heavy duty Cordura nylon construction.
• Package Weight: 1.5 lbs
• Package Dimensions: 41.656 L x 6.096 H x 33.274 W (cm)
• country of origin :Italy

User questions & answers

Question:	What are the interior dimensions? I've already ordered and sent back two other bags that were couldn't hold my bogen 3046 with 501 head
Answer:	It is working perfectly with My Pilotfly h2.

• Sturdy and durable aluminum alloy construction; Fluid damping head system provides smooth rotation and tilt; Pan head design gives you precise control of the camera's position
• 6 1/4" x 2" quick release plate with 1/4" & 3/8" screw, offers better bearing of DV or camera; Non-slip gaskets for protecting and loading equipment better
• Adjustable handle can be installed on the right or left of head for easy angle adjustment; Built-in gradienter for horizontal position check
• Adjustable tripod height to satisfy different photography requirement; Maximum Operating Height: 70 7/8" (1800 mm); Minimum Operating Height: 31 1/2" (800 mm); Locking buckles for easy and quick height adjustment, more convenient than those locked by knobs
• Folded Height: 33 7/16" (850 mm); Bowl Size: 2 15/16" (75 mm); Overall Dimension (LxWxH): 50" x 43 5/16" x 70 7/8" (127 x 110 x 180 cm); Tilt Range: -70°to 90°; Pan Range: 360°; Maximum Load Capacity: 22 lbs (10 kg)

User questions & answers

Question:	Is the quick release plate Arca Swiss
Answer:	It should. I use it with the Ricoh Theta V 360 camera all the time and love it. It’s the best monopod I have ever used!

Product features

AW 71 INCH Heavy Duty Tripod with Fluid Head Kit

• Sturdy and durable aluminum alloy construction
• Fluid damping head system provides smooth rotation and tilt
• Pan head design gives you precise control of the camera position
• 6 1/4" x 2" quick release plate with 1/4" & 3/8" screw, offers better bearing of DV or camera
• Non-slip gaskets for protecting and loading equipment better
• Adjustable handle can be installed on the right or left of head for easy angle adjustment
• Upgraded 1" (25mm) max. tube dia., more durable than those with 13/16" (20mm) max. tube dia.
• Adjustable tripod height to satisfy different photography requirement
• Built-in bubble level for horizontal position check
• Locking buckles for easy and quick height adjustment, more convenient than those locked by knobs
• The metal mid-spreader makes the tripod more stable
• Supper wear-resisting rubber base provides stability and prevents skidding
• Loop for easy close up and carrying bag for convenient storage and transportation

Professional fluid video ballhead

Moveable handle

Quick flip locking system

Portable Bag

Product description

Our most powerful SD UHS-I memory card yet deliver performance that elevates your creativity. With shot speeds of up to 90MB/s and UHS speed Class 3 (U3) recording, you’re ready to capture stunning, high-resolution, stutter-free 4K UHD video . And, because your pace doesn’t let up after the shots are in, it delivers up to 170MB/s transfer speeds for a faster postproduction workflow [requires a compatible device capable of reaching such speeds, such as the SanDisk SD UHS-I card reader (sold separately)]. Plus, it’s built to withstand weather, water, shocks and other less-than-ideal conditions so you can rest assured that it’s good to go wherever your work takes you. | Up to 170MB/s read speeds, engineered with proprietary technology to reach speeds beyond UHS-I 104MB/s, require compatible devices capable of reaching such speeds. Write speed up to 90 MB/s. Based on internal testing; performance may be lower depending upon host device, interface, usage conditions and other factors. 1MB=1,000,000 bytes. X = 150KB/sec. | Full HD (1920x1080) and 4K UHD (3840 x 2160) video support may vary based upon host device, file attributes and other factors. | UHS Speed Class 3 designates a performance option designed to support 4K UHD video recording with enabled UHS host devices. UHS Video Speed Class 30 (V30), sustained video capture rate of 30MB/s, designates a performance option designed to support real-time video recording with UHS enabled host devices.

• Shot speeds up to 90MB/s, transfer speeds up to 170MB/s [requires a compatible device capable of reaching such speeds, such as the SanDisk SD UHS I card reader (sold separately)] | Based on internal testing; Performance may be lower depending upon host device, interface, usage conditions and other factors 1MB=1,000,000 bytes; X = 150KB/sec
• Perfect for shooting 4K UHD video and sequential burst mode photography, Full HD (1920x1080) and 4K UHD (3840 x 2160) video support may vary based upon host device, file attributes and other factors
• Capture uninterrupted video with UHS Speed Class 3 (U3) and video Speed Class 30 (V30) | UHS Speed Class 3 designates a performance option designed to support 4K UHD video recording with enabled UHS host devices; UHS video speed class 30 (V30), sustained video capture rate of 30MB/s, designates a performance option designed to support real time video recording with UHS enabled host devices
• Built for and tested in harsh conditions : Temperature Proof, Water Proof, shock Proof, and X ray Proof, Card only
• Lifetime limited manufacturer warranty (30 year warranty in Germany, Canada and regions not recognizing lifetime warranty; See official SanDisk website for more details regarding warranty in our region)
• System ram type: ddr3l_1600_sdram

User questions & answers

Question:	My computer/card reader does not recognize this card, no error code, nothing. Used it with Nikon 3300 should be compatible. Suggestions
Answer:	Just a guess, but you might need to change the formatting. Awhile back I bought a 128GB microSD card to use in an Android tablet that says the largest card it can take is 32GB. 32GB cards typically come pre-formatted FAT32 and cards higher come pre-formatted EXFAT. Windows can't natively format partitions larger than 64GB as FAT32 but third-party software is available for free that can. I reformatted the 128GB card as FAT32 and it works fine. That version of Android doesn't recognize EXFAT. (Before I bought the card I knew I would probably need to reformat it.)
Question:	will this card work on my cannon t6i camera
Answer:	I recently purchased this card for my t6i; however, my camera doesn't recognize the card. I've tried to format it to no avail. As a result, I will use it on my laptop to store images.
Question:	I purchased a canon sx720 for an upcoming alaska cruise. i want to take come video on the cruise. is this a good sdhc for videoing
Answer:	Yes, I use this csrd for video, shooting 1080p to 4K, the 90 MB’s down load and upload speed helps a lot during transferring and editing my data.
Question:	what's the difference between this sandisk card and the sandisk extreme pro 32gb up to 95mb/s uhs-i/u3 sdhc flash memory card - sdsdxpa-032g-x
Answer:	I'm not 100% sure but I think they are the same. One has a "V30" Video Class rating printed on the label and the other does not. I think the V30 is a fairly new type of card speed rating for videos. The Speed Class and UHS Speed Class are the same for both which leads to me think they are the same. For some info on video ratings: https://www.sdcard.org/consumers/choices/speed_class/index.html
Question:	Can i access itunes on this? i want a gaming laptop, but i’d also like to be able to access itunes when i need to. thanks
Answer:	Yes, you can.
Question:	can i stream of this laptop
Answer:	Yes
Question:	does it come with a charger
Answer:	Yes it does.
Question:	can I upgrde the ram to 32gb
Answer:	You can, you just have to very carefully disassemble the bottom of the laptop and disconnect the battery pack.

Product features

SanDisk Extreme PRO SD UHS-I Card

Our most powerful SD UHS-I memory card yet delivers performance that elevates your creativity. With shot speeds of up to 90MB/s* and UHS Speed Class 3 (U3) recording, you’re ready to capture stunning high-resolution, stutter-free 4K UHD video. And, because your pace doesn’t let up after the shots are in, it delivers up to 170MB/s* transfer speeds for a faster postproduction workflow.

Shot Speeds up to 90MB/s*

Perfect for capturing the action as it happens, without missing a beat.

Transfer Speeds up to 170MB/s* [64GB-1TB]

Once the shots are taken, your work is only half- done. Accelerating your workflow means you can carve out more time to take your creativity to the next level.

Perfect for 4K UHD Video(1)

Sometimes speed is what you need. The SanDisk Extreme PRO SD UHS-I card delivers the performance to capture stunning, uninterrupted 4K UHD video.

Stunning Sequential Burst Mode Shots

Rated UHS Speed Class 3 (U3) and Video Speed Class 30 (V30), the SanDisk Extreme PRO SD UHS-I card lets you capture sequential burst mode shots without missing a beat.

Durability You Can Count on

Built for and tested in harsh conditions, the SanDisk Extreme PRO SD UHS-I card is temperature- proof, waterproof, shock-proof, and x-ray-proof.

Recover Images You Accidentally Deleted

Includes an offer for RescuePRO Deluxe 2 Year data recovery software which lets you restore images you accidentally deleted.

Product description

This super-telephoto zoom lens has been developed to cover focal lengths from 150mm to 450mm — a focal-length range most demanded by high-end PENTAX camera users

It features the PENTAX-original, high-grade HD Coating to produce extra-sharp, high-contrast images even under demanding lighting conditions, such as when the subject is backlit. It also incorporates three ED (Extra-low Dispersion) Glass elements and an Anomalous Dispersion Glass element to effectively compensate chromatic aberration. Its dustproof, weather-resistant body also makes it extremely dependable and durable in demanding outdoor conditions.

• IN CAMERA SHAKE REDUCTION (SR): The PENTAX digital SLR K series cameras are equipped with the SR mechanism built into the camera body. Because shake reduction is applied in the camera body, this means that any lens compatible with the K Series cameras will benefit from image stabilization
• SUPER TELEPHOTO ZOOM: This zoom lens covers a super telephoto range from 150mm to 450mm. It is designed to be compact and light enough to hold during long range shooting of such subjects as wildlife, aircraft and sports
• OUTSTANDING IMAGE DESCRIPTION: Thanks to its state of the art optics featuring three ED (Extra low Dispersion) glass elements and one superlow dispersion glass element, this zoom lens effectively minimizes spherical and chromatic aberrations, while producing crisp, high quality images free of colour bleeding
• ALL WEATHER (AW): This lens features a dependable dustproof, weather resistant structure with eight special seals to prevent the intrusion of water and dust into the lens interior
• HD COATING TO ENHANCE IMAGING POWER: Produce high contrast images with edge to edge sharpness and free of flare and ghost images
• DC MOTOR: Smooth, quiet AF operation using a built in AF driving motor
• QUICK SHIFT FOCUS SYSTEM: Possible to instantly switch from autofocus to manual focus operation, by holding the shutter release button halfway down and turning the focus ring after the subject is captured in focus by the camera’s AF system

Product features

Powerful optics

Thanks to its state-of-the-art optics featuring three ED (Extra-low Dispersion) glass elements and one superlow dispersion glass element, this zoom lens effectively minimizes spherical and chromatic aberrations, while producing crisp, high-quality images free of colour bleeding.

Beautiful Bokeh

Thanks to the round-shaped diaphragm to produce a natural, beautiful bokeh (defocus) effect, while minimizing the streaking effect of point light sources

Get close up.

Thanks to the smooth, quiet AF operation you can operate the lens without the worry of disturbing the subject, whether in a formal setting or with sensitive subject, you'll be sure to get the shot.

Capture the moment.

This lens is designed to be compact and light enough to handhold during long-range shooting of such subjects as wildlife, aircraft and sports.

In-body SR mechanism

Because shake reduction is applied in the camera body, this means that any lens compatible with the K-Series cameras will benefit from image stabilization.

All Weather

This lens features a dependable dustproof, weather-resistant structure with eight special seals to prevent the intrusion of water and dust into the lens interior.

HD COATING

Produce high-contrast images with edge-to-edge sharpness and free of flare and ghost images.

Super Protect Coating

PENTAX-original SP coating uses fluorine treatment on the front surface of the lens. This prevents adhesion of dust, water drops, grease and other substances.

Product description

Note: Cameras are NOT included.

Description:

The Panoramic Rotation Camera Tripod Monopod is a portable travel stand for Canon Nikon Sony DSLR camera, DV video camcorders.

Tripod height can be adjusted from 20.9 inches/53 centimeters to 69.7 inches/177 centimeters. The tripod can be converted to a monopod in seconds with height ranges from 17.3 inches/44 centimeters to 52.8 inches/134 centimeters.

It is made of aluminum alloy tube and environmental nonslip rubber. The rotatable plastic feet can be better adjusted to the floor not being static.

The tripod features 3-way swivel pan head with quick release plate. It boasts 360 degree panning and allows you to take photos at any angle with horizontally and vertically. Accurate panoramas can be easily orchestrated.

It weighs only 4 pounds/1.8 kilograms , light-weight but durable. We also offer you a storage bag, making it easy for outdoor photographers to carry and transport.

The adjustable tripod also features considerate design. Horizontal rotation valve allows you to take photos at any angle horizontally and vertically; Multi-function hook allows you to hang additional weight for increased stability. Telescopic adjustment handle and pitch adjustment lever provides you with easy operation and convenient shooting adjustment.

Specifications:

Color: Black

Material: Aluminum Alloy

Head type: Pan Head

Minimum Tripod Height: 20.9 inches/53 centimeters

Maximum Tripod Height:69.7 inches/177 centimeters

Minimum Monopod Height: 17.3 inches/44 centimeters

Maximum Monopod Height: 52.8 inches/134 centimeters

Tilt Range: 180 degree

Panning Range: 360 degree

Tripod Weight: 4 pounds/1.8 kilograms

Load capacity: 8.8 pounds/4 kilograms

Package Contents:

1 x Aluminum Alloy Camera Tripod Monopod

1 x Carrying Bag

• Light-weight Practical 2-in-1 Tripod. Can be converted to a monopod in seconds: Loosen the knob and Pull out the center column that the center column can be used as a monopod
• Note: It only includes one 2-in-1 tripod monpod. Monopod is NOT separate. Camera Not Included
• Adjustable 4-section Legs; Weighs only 4 pounds/1.8 kilograms, Light-weight but durable; Comes with a storage bag, easy for outdoor photographers to carry and transport
• 3-Way Swivel Pan Head with Quick Release Plate: 360 degree panning; Allows you to take photos at any angle with horizontally and vertically; Accurate panoramas can be easily orchestrated
• Made of aluminum alloy tube and environmental nonslip rubber. The rotatable plastic feet can be better adjusted to the floor not being static. Twist Lock Legs with Anti-Rotation System giving a more convenient leg handling; Multi-function hook allows you to hang additional weight for increased stability; Telescopic adjustment handle and pitch adjustment lever for easy operation and convenient shooting adjustment

User questions & answers

Question:	Will this also support a Nikon Coolpix P
Answer:	No, it isn't.
Question:	Does the head allow for smooth motion
Answer:	Your tripod is old and no longer manufactured as that model. Bogen is now Manfrotto. The Manfrotto 028B tripod looks similar. Measure the length and width of your tripod and get a bag that size. The bag you chose may work but I cannot find dimensions of your old tripod. This bag has great reviews. I have a Hakuba bag and it is nicely padded: http://www.amazon.com/gp/product/B00007E7RG?keywords=Hakuba%20PSTC%20300&qid=1445541124&ref_=sr_1_1&sr=8-1
Question:	Whats the advantage of a ball joint compared to this tripod
Answer:	I haven’t tested with that camera. However I was looking to get that camera. Might need an adaptor. I’m currently using it with an Sony AX-53 and have no issue. Have you tried just attaching the quick release plate by itself?
Question:	can you unscrew the head and swap it for a different one
Answer:	please check the screw hole of your manfrotto 502AH is 3/8" or 1/4", the screws of our monopod is 3/8" and 1/4" changeable. It can support both 3/8" and 1/4" screw hole.

Product description

The Cayer BV30L Professional Tripod System includes the BV30L Aluminum Tripod and K3a Fluid Head with Carrying Bag. Capable of supporting up to 13.2 lb, the BV30L provides a professional tripod system solution.



K3a Video Head

- Weighs 2.5 pounds, supporting up to 13.2 lb

- Separate pan and tilt lock levers, a built-in bubble level indicator

- Fixed counter balance, pan, and tilt drag, +90°/-70° tilt angle, 360° panning

- One interchangeable Pan Bar for right and left-handed operators via the two rosettes on either side of the head

- Two universal quick release plates, with ¡À20mm sliding range, a 1/4"-20 Screw and a Spare 3/8"-16 Screw

- Tightened with a 75mm half-ball mount, integrated flat base with 3/8"-16 thread in the center, able to be secured to flat-mount accessories such as sliders, jibs, and more without unwieldy bowl adapters



BV30L Tripod Leg

- Built-in 75mm bowl

- 2-stage 3-section leg design allows you to adjust the height of the tripod from 35" to 72.7"

- Mid-level spreader provides enhanced stability by holding the tripod legs in locked position

- Supports payloads of up to 88lb, even larger video heads or heavy dollies and sliders can be supported by the tripod itself



Specificaions:

Material: Aluminum Alloy

Tilt range: -70° to +90°

Pan range: 360°

QR Plate Length: 4.33" / 110 mm

Friction Control: Fixed

Mounting Platform: 1/4" ; spare 3/8" screws

Diameter (bowl):3" / 75mm

Sections: 3

Flod Length: 35" / 890 mm

Max. Operating Height: 72.7" / 1845 mm

Min. Operating Height: 33.3" / 848 mm

Loading Capacity: 13.2 lbs / 6 kg

Weight: 8.82 lbs / 4 kg



Packing List:

1 x BV30L Tripod Leg

1 x K3 Fluid Head

1 x 75mm Half Ball Adapter

1 x Head Lock Handle

1 x Extra QR Plate (2 pcs in total)

2 x Hex Keys

1 x Carrying Bag

• - Supports 13.2 LB, a professional video tripod system designed for HDSLR and interchangeable lens cameras
• - Fluid Head features pre-set counterbalance, fixed fluid drags in both the pan and tilt axes, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane
• - Two provided quick release plates, each comes with a 1/4"-20 screw, and a 3/8"-16 screw stored in a thread under the plate, offers a sliding range of +20/-25mm - to enable travel capabilities
• - Featuring locking rubber buckles, this 2-stage fluid head tripod with a built-in 75mm bowl; mid-level spreader provides enhanced stability by holding the tripod legs in locked position
• - 13.2 lb Loading Capacity | 33" to 72" Height Range | Tilt Angle +90° / -70° | 360° Panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 pcs of Quick Release Plates

User questions & answers

Question:	Hello, I buy on of those from you few months ago, the pan bar its broken, how can I buy a new one pan bar? Thanks
Answer:	as long as the camera threaded for a tripod it will fit. As far as "support", it should easily be strong enough to hold about 792 of those cameras, rough estimate of course : )
Question:	Is there a Dolly which will work with this
Answer:	Very smooth. You won't regret it.
Question:	When I attached my dslr to the plate and mounted on the head, there's no room for the tightening mechanism to turn, it is loose,what should I do next
Answer:	Ball heads are designed for DSLR cameras. I use this with my T7i and have no problems at all even with heavy lenses. I really like the monopod feature as well. The pan tilt is more for video (they say) it really comes down to what you like using. Hope that helps.
Question:	Do the knobs that adjust the legs come loose after a lot of usage
Answer:	yes, it can be removed exposing a 1/4" male thread... you can rotate the head on this tripod clockwise continuously but going in an anticlockwise direction will start to make the head come off.

Product features

Cayer BV30L Tripod System with Fluid Head

The Cayer BV30L Tripod Kit combines the professional K3 fluid head with aluminum tripod legs and mid-level spreader, working with larger camcorders weighing up to 13.2 lb, creating an effective combination of stability and smooth, precise control, ideal for both camcorders and DSLR cameras.

Weighing 2.5 pounds, the two-way fluid head also features a side lock system for the sliding quick release plate, a pan handle, and an integrated bubble level.

The two-stage tripod features a 75mm bowl and the legs are individually adjustable and feature a mid-level spreader for stability on uneven ground.

This system offers a height range of 33.3 to 72.7" and folds down to 35" for storage inside the included padded carrying case.

-

BV30L Tripod Kit Specs

Load Capacity: 13.2 lb

Ball Base: 75 mm

Leg Construction: Aluminum

Leg Sections: 3

Minimum Height: 33.3" / 84.8 cm

Maximum Height: 72.7" / 184.5 cm

Folded Length: 35" / 89 cm

Weight: 8.8 lb / 4 kg

75mm Half Bowl

Locked by 75mm ball adapter with 3/8"-16 stud, allows you to quickly level the head without having to readjust the legs.

Middle Spreader

The mid-level spreader helps prevent instability that a ground-level spreader can introduce when working on uneven surfaces.

K3 head

With 75 mm flat base, the aluminum head weighs 2.5 pounds and provides a bubble level and precision control handle. Its lateral tilt range is -70°/+90° and it provides 360° panning rotation.

Product description

An Amazon Brand

• Supports video cameras, still cameras, and scopes up to 6.6 lbs.
• 1/4-inch univeral thread mount
• Four leg sections able to extend 67-inches
• Non-skid rubber foot and retractable spikes
• Includes carrying bag
• Built in cushion grip and adjustable wrist strap
• Made of lightweight aluminum weighing less than 1 lb
• Product Dimension: 1.7 x 1.6 x 21.4 inches (LxWxH); 15.7 ounces

User questions & answers

Question:	When you spin the rubber foot "up" can you attach a 3/8" universal monopod base to it
Answer:	I would say "No" based on just looking at it. There is a pointed tip that goes out beyond the threads so I cannot imagine the base being able to thread onto this foot because the rubber movable tip does not come off-it just adjusts for dirt or concrete.
Question:	Can I hold on to the grip and put my camera on the other end to take photos and videos of myself? Also, is this monopod waterproof
Answer:	No its not possible to hold on to the grip and place ur camera at the other end. It doesnt have the functionality to do so. This is not one of those monopods that you can take selfies with. And when you mean it can get wet and will not hinder its functions? Then yes
Question:	What is the collapsed length of the monopod
Answer:	Completely collapsed, the monopod is 21 3/8" long (54.3 cm). When packed in the included case, it's 22" (55.9 cm).
Question:	Can the Non-skid rubber foot be unscrewed (removed) in order to connect to the top of a tripod as an extension
Answer:	The answer is, not easily. The screw isnt threaded all the way. It is push in fitting into the pole. Also the spike is part of the screw. You can rip it out, tap the plastic end cap to accept the 3/8 male to 1/4 female adaptor that come with it and then thread on your tripod foot. It will be extra work and you need threading tools but for $18 you may still come out well ahead. You might also be able to buy a 1/4 stud with the same type push in fitting. I have pictures but no way to post it here.

Product description

Set out with the ultimate, big-glass expedition pack, built to provide long-wearing comfort and large capacity. Feedback from Trekker-loving pros and enthusiasts helped us improve our premium suspension system by adding increased adjustability and airflow to this pack. Lowepro's ActivLift SystemTM harness is constructed to mimic the natural "S" curve of the back, transfer more weight from waist to hips, make it easy to fit to the length of your torso, and include airflow channels to improve breathability. High-performance tech fabrics -- from 630D high-density nylon Oxford body to 1000D Cordura® base -- provide superior abrasion, tear and water resistance plus durability, without adding extra weight. A hydration-ready side pocket with a seam-sealed pouch offers easy access to 70 oz. (2L) of liquid from a hydration reservoir (not included) Pack the maximum amount of gear and micro-adjust for a snug and secure fit with the patent-pending MaxFit SystemTM of padded and adjustable dividers. Attach and access extra gear via the tuck-away tripod holder, tall mesh side pockets and bottom compression straps. Remove the protective backpack lid and use as a wearable waistpack - it features multiple pockets and a mesh-covered backpack for comfort. Keep travel hassle-free with the checkpoint-friendly laptop sleeve - it fits in the front pocket and adheres to most airline requirements. The patented, built-in All Weather AW CoverTM with cinch straps and rainflap protects your pack from the elements; adjusts to expand or cinch down; allows use of compression straps at bottom while cover in use This bag will fit approximately: 1-2 Pro DSLRs (one with up to 400mm f/2.8 lens attached), 4-6 extra lenses, 2 flashes, Tripod or monopod, up to a 15" laptop, Accessories and personal gear. Technical Specifications: Internal Dimensions: 28.2 x 19 x 44 cm, External Dimensions: 49.3 x 35.9 x 57.3 cm, Weight: 4.1 kg

• Fits 1-2 Pro DSLRs, one with up to 400mm f/2.8 lens attached, 4-6 extra lenses, 2 flashes, tripod or monopod, up to a 15" laptop, accessories and personal gear
• Our ActivLift System harness is constructed to mimic the natural "S" curve of the back, transfer more weight from waist to hips, make it easy to fit to the length of your torso, and include airflow channels to improve breathability
• High-performance tech fabrics - from 630D high-density nylon Oxford body to 1000D Cordura base - provide superior abrasion, tear and water resistance plus durability, without adding extra weight
• A hydration-ready side pocket with a seam-sealed pouch offers easy access to 70 oz. (2L) of liquid from a hydration reservoir (not included)
• Pack the maximum amount of gear and micro-adjust for a snug and secure fit with the patent-pending MaxFit System of padded and adjustable dividers

User questions & answers

Question:	what is the warranty for the zipper
Answer:	Hi, the new pan bar could be found via the link: https://www.amazon.com/dp/B07D6T8KWP If there is any issue about the tripod, don't hesitate to contact our customer service throuh your order.
Question:	Is this fiting on nikon 600mm with camera
Answer:	I use the Ravelli dolly with this tripod.
Question:	what is the max weight load this bag can carry??? I have seen a lot of bad reviews of stitiching tearing
Answer:	The plate locking lever with a a ratchet style screw is spring-loaded, pull it toward you, reposition the lever back half a turn and continue tightening with a few ratchet turns.
Question:	Will this backpack pass TSA as a carryon bag
Answer:	YES! Mine broke after about 4 uses. I am extremely disappointed!

Product features

Best-in-Class Comfort

Premium expedition pack built for a long-lasting, comfortable carry of heavy loads over rough terrain.

Extreme Protection Inside and Out

High-performance tech fabrics, from high-density nylon to a rugged Cordura base, provide superior abrasion, tear and water resistance.

No Going Back

Extended trips to the backcountry require you to bring all the gear you may need. Pack all your critical equipment and never look back.

ActivLift System

Our ActivLift System harness is constructed to mimic the natural 'S' curve of the back, transfer more weight from waist to hips, make it easy to fit to the length of your torso, and include airflow channels to improve breathability.

Holds All Your Gear

Pack the maximum amount of gear and micro-adjust for a snug and secure fit with the patent-pending MaxFit System of padded and adjustable dividers. Attach and access extra gear via the tuck-away tripod holder, tall mesh side pockets and bottom compression straps. Keep travel hassle-free with the checkpoint-friendly laptop sleeve – it fits in the front pocket and adheres to most airline requirements.

Protection and Comfort for Long Treks

Our patented, built-in All Weather AW Cover with cinch straps and rainflap protects your pack from the elements; adjusts to expand or cinch down; allows use of compression straps at bottom while cover in use. Remove the protective backpack lid and use as a wearable waistpack – it features multiple pockets and a mesh-covered backpack for comfort. A hydration-ready side pocket with a seam-sealed pouch offers easy access to 70 oz. (2L) of liquid from a hydration reservoir (not included).

• The monopod is made of high quality aluminum, which is lighter in weight.The 5-section can extend height 19.5 inch to 66 inch，weight only 1.36Ibs and max load 11Ibs. This video monopod kit is perfect for sporting events, travel and outdoor shooting.
• Universal Mounting Plate with Reversible 1/4"-20 & 3/8"-16 screw of the Monopod with feet is matched to a variety of Ball Head as well as any professional camera and DSLR cameras, which can be directly installed
• Tripod support base can help monopod achieve 360 degree panoramic rotation and 20 degree tilt. The removable base can be used as a Mini table-top tripod.
• Equipped with non-slip rubber feet and stainless feet spikes to help the monopod stand firmly. Different terrain shot indoors and outdoors.
• Monopod can be used to alpenstock . It is light and convenient, also give you other choice.

User questions & answers

Question:	Does the monopod for $42 extend to 65"? No pics showing a 65" ext
Answer:	With the three foot collapsible base my unit measured 66" from the floor to the top of the disc where the camera sits. With just the single rubber foot it measured 64". I stand 6'1" and find this monopod comfortable to use with my D3300 mounted on top. Happy shooting.
Question:	Does the "tripod" portion adjust so it can be freestanding on a sloped surface
Answer:	No. the tightening collar on the bottom, can tighten in the straight up position, but cannot tighten well enough for a sloped position. I would not leave my camera alone even in the straight up position unless everything around was absolutely still, and then probably wouldn’t. monopods with small legs are not really freestanding in my opinion.
Question:	What is the small velcro pouch that comes with it for
Answer:	The pouch attaches to your belt with a velcro flap. There is a small pocket for the foot of the monopod to rest in to aid in stabilizing your camera when you are on the move or in a venue that does not allow monopods on the ground. Behind the pocket there is an open area that acts as a holster for transporting the monopod when not in use on the camera. Hope this helps.
Question:	Will this hold a cellphone gimbal without falling over
Answer:	Yes! It holds my Nikon camera, so I don't think a cell phone would be a problem.

Product features

Specifications:

• Material : Aluminum alloy
• Monopod top connection screws : 1/4 - 3/8"screw
• The thread at the bottom of the monopod is: 3/8"screw
• Monopod Max Height: 165cm /65inch
• Monopod + Support Base Max Height :168cm / 66inch
• Monopod + Support Base Folded Length: 50cm / 19.5inch
• Number of Leg Sections: 5
• Legs diameter :Φ25,Φ22,Φ19,Φ16,Φ13mm
• Monopod + Support Base Net weight: 620g /1.36Ibs
• Maximum Load: 5kg /11Ibs

A user-friendly design of 20° angle adjustment

The Support base of the Monopod has a 360 ° rotation and 20 ° tilt motion for your photographic equipment to achieve the best shooting position.

Top Screw: 1/4 - 3/8" Screw Reversible

Compatibility with various types of photography equipment : point-and-shoot, mirrorless,SLR,DSLR,action cameras and video camcorders,DV.

SOLID CONSTRUCTION:

The koolehaoda Monopod’s Body uses Aviation Aluminum Alloy of extremely qualified strength, forging not only Lightweight & Stability of the tube,strong load capacity, up to 5kg / 11Ibs.

Monopod with Metal spikes & Rubber Foot

• On the base of the unipod tripod, screw-in metal spike is easy to install and provides excellent stability on dirt, grass and other uneven terrains.
• With removable non-slip rubber foot, it prevents unexpected movement when shooting.

Flexible Monopod

• Legs diameter :Φ25,Φ22,Φ19,Φ16,Φ13mm
• Extends to height of 165cm/65 inches
• Monopod closes to a compact size of 45cm / 18 inches
• Five-section screw leg-locking system for secure height adjustment

Monopod can be used to alpenstock

Monopod can be used to alpenstock . It is light and convenient, also give you other choice.

Portable small pockets:

• Can be used as temporary storage bag for climbing, travel, etc.
• There are two layers, providing better insurance: first layer to easy carry your monopod, second layer to support your monopod when shooting.

Foldable tripod base

• Folded Length: 12cm
• Moving Ability: +/- 20° Titing, 360° Panning
• Three Feet Support Base connection screws is: 3/8"
• Weight: 210g / 0.63 pounds
• The bottom can be adjusted by a hex wrench.

Mini Desktop tripod

It is not only suitable for monopod base support bracket use. Can also be used as a desktop tripod, you can use it on the table photography.

Product description

Dedicated to professional macro photographers90-degree column mechanism built into the top castingCentre Ball Head ensures smooth and precise framingM-lock System for a fast, easy to use, compact solution200PL-PRO Plate compatible with Manfrotto RC2 and Arca-Swiss

• Load Capacity: 22.1 lb
• Maximum Height: 64.6" / Minimum Height: 3.5"
• Dedicated to professional macro photographers
• 90-degree column mechanism built into the top casting

User questions & answers

Question:	Does this have a hook or place for hanging ballast to weight the tripod for balance
Answer:	I keep a Canon TI5 with a Tamron 150 - 600 MM in mine with no problem. My only little problem with this bag is the weight. It is heavy, but, it protects my gear where ever I am.
Question:	Is the carrying bag included
Answer:	I have mine fully loaded with 2 full frame dslr bodies, multiple lenses, and a host of other gear. Can't jam anything else in. Don't know exactly how much it weighs, but if it was much more I couldn't lift it. No issues with zippers or seams (so far!) and I've been using it for 6 months, or so.
Question:	What is the diameter when it is folded? Will it fit in the water bottle pocket on a hiking backpack
Answer:	Most of the airports and airlines will make exceptions for photo equipment. The issue for the airlines is the potential weight of the backpack. full loaded it is way above the approx 9kg that they would allow in the overhead bin. I travelled the world with it and had at times discussions but so far it always turned out ok.

Product description

Aveaal A325 Compact Monopod is constructed from a high quality lightweight aluminum, designed to extend to 58.6" inches and collapse to a very compact 16.5".



Ultra light-weight construction and able to support up to 6.6 lbs 5 leg sections and extendable flip locks legs with non-skid rubber tip feet, built-in adjustable wrist strap, includes tripod bag.



An ergonomic soft grip and wrist strap helps ensure comfort and security while shooting. Its -3/8"-16 / 1/4"-20" standard universal threaded screw attaches to the tripod mount of most cameras.



★Feature



Lightweight aluminum for easy mobility.

Ergonomic quick-snap locks for quick setup.

3/8"-16 / 1/4"-20 Head mounting plate compatible with most tripod heads or cameras

Rubber foot with retractable leg spike for indoor and outdoor terrain.

Built-in wrist strap prevents monopod from falling from hand.



★Specifications



Material: aluminum alloy

Number of leg sections: 5

Maximum operating height: 58.6 inches

Minimum operating height: 16.5 inches

Folded height: 16.5 inches

Max operating load: 6.6 lbs

Net weight: 1.41 lbs



★ Package listing:



1x A325 aluminum monopod Leg

2 x Hex Keys

1 x Metal Spikes

1x Shoulder bag

• ☑Multi-function: Not only a monopod for cameras, but also act as a walking stick for outdoor use.Ideal for sport interview, travel photography, extreme sports and so on.
• ☑Flexible: Leg locking system offer an adjustable height range of 16.53" (42cm) to 58.66" (149cm).
• ☑Material: 5 sections leg with durable aluminium body, adds up to durability factor along with its benefit of a lightweight structure.ideal support 6.6 pounds of camera and lens.
• ☑Portability: Compact size of 16.53''(420mm) N. weight:1.78lb(8100g). Plus carrying bag and adjustable shoulder strap for convenient delivery.space saving and easy to carry
• ☑Application:Supplied with a standard -3/8"-16 / 1/4"-20 Head mounting plate compatible with most tripod heads or cameras thread for attaching to camera, video or spotting scope.

User questions & answers

Question:	is the foot replaceable? what is the screw type
Answer:	Short answer is: No, it will not fit. It's about 5 inches in diameter (not perfectly round) or 13-13.75 inches in circumference and 17 inches in length.
Question:	Can the wrist strap be removed
Answer:	The limited consumer warranty covers any defects in material or workmanship in the new Lowepro product accompanied by the warranty statement. The warranty does not affect or modify any warranty provided by the Lowepro retailer nor does it affect any additional rights you may have under the laws of your jurisdiction. The warranty lasts as long as you, the original purchaser, own your Lowepro product.The warranty does not cover damage caused by improper care, mishandling, misuse, alteration, or accidental damage; nor does it cover the natural breakdown of materials that occurs after extended use (i.e. zipper wear, fabric abrasion, etc.). In time, even a Lowepro bag will wear out!Also, the warranty excludes all claims to any incidental or consequential loss to personal property. Some states, provinces and countries do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion may not apply to you.

Product description

Which of handy supports will make it to your kit bag?

If you shoot handheld in low light or at long focal lengths you run the risk of blur from camera shake. a unipod monopod

can give you the extra support you need with a fraction of the fuss of a tripod.

A one-legged tripod?

With a A222 Unipod Monopod can tilt and sway and change angles even with the monopod attached to your camera!



1.Designed for Serious Photographers:

Made of Aluminum Alloy, weighting only 1.41 lbs, 5-section monopod tripod

supports up to 65 in of camera equipment.



2.Convertible 1/4" and 3/8" Thread:

By unlocking the monopod loading plate and put the screw upside down, the travel monopod is compatible with various types

of photography equipments: point-and-shoot, mirrorless, DSLR, action cameras and video camcorders.



3.Interchangeable Foot:

On the base of the Moman unipod tripod, screw-in metal spike is easy to install and

provides excellent stability on dirt, grass and other uneven terrains.

With removable non-slip rubber foot, it prevents unexpected movement when shooting.



4.Sturdy Three Feet Tripod:

Ball joint of moman monopod tripod stand base provides 360°rotation and

20°tilt movement for your photo equipment to get the best shooting position.

Features:

Monopod top connection screws: 1/4" - 3/8" screw

The thread at the bottom is: 3/8" screw

The equipped hand belt also allows for using it as an alpenstock

Monopod Max Height: 65 in

Min length: 18.5 in

Diameter: 0.5-0.98 in

Material: Aluminum Alloy

Sections: 5

Weight: 0.9 lbs



Base:

Folded Length: 4.6 in

Connecting Screw Diameter: 3/8"

Weight: 0.5 lbs

Monopod + base Min length: 19.7 in

Monopod + base Weight: approx. 1.41 lbs

Package including

1*Moman A-222 Monopod

1*M-1 3-Leg Tripod

1*Carrying bag

• 📷Get 1 L-shaped Camera Mount, Add Both into Cart! 【Remarkable Carrier Plate】Universal Mounting Plate with Reversible 1/4"-20 & 3/8"-16 screw of the Moman Monopod with feet is matched to a variety of Ball Head as well as any professional camera and DSLR cameras, which can be directly installed.
• 【Wonderful Body Material】The Moman Monopod’s Body uses Aviation Aluminum Alloy of extremely qualified strength, forging not only Lightweight & Stability of the tube, but also Elegance & individuality.
• 【Flexible Structure】The heavy duty unipod for DSLR can be extended to 5 sections and height of 65’’. Flexible 5 sections of foot tube with a maximum diameter of 1’’ and a minimum of 0.5’’ and a reduction of 0.1’’ per section. Starting with the roughest tube is highly suggested as to optimize stability
• 【Multiple-functional Tripod Base】A camera base is portable, provided for free to apply for different applications in case of slipping issues. What’s more, the tripod base can be adjusted to your favorite angles.
• 【Tidy & Smooth Outlook】Leg tube anti-dust technology enables the tube lock system closely attached to the leg tube so to prevent sand and dust from slipping into the tube, which absolutely saves photographers’ time of cleaning and maintenance.

Product features

Moman Camera Monopod

• Monopod top connection screws: 1/4" - 3/8" screw
• The thread at the bottom is: 3/8" screw
• The equipped hand belt also allows for using it as an alpenstock
• Monopod Max Height: 65 in/ 165 cm
• Min length: 18.5 in
• Diameter: 0.5-0.98 in
• Material: Aluminum Alloy
• Sections: 5
• Weight: monopod 0.9 lbs + base 0.5 lbs
• Monopod + base Min length: 19.7 in
• Monopod + base Weight: approx. 1.41 lbs
• Max payload: 22 lbs/ 9.9 kg

Remarkable Carrier Plate

Universal Mounting Plate with Reversible 1/4"-20 & 3/8"-16 screw of the Moman Monopod with feet is compatible with various types of photography equipments: point-and-shoot, mirrorless, DSLR, action cameras and video camcorders.

Multiple-functional Tripod Base

• Folded Length: 4.6 in
• Connecting Screw Diameter: 3/8"

Portable tripod base provided for easy to apply for different applications in case of slipping issues. What’s more, the tripod base can be adjusted to your favorite angles.

Mental Base & Rubber Foot

On the base of the Moman unipod tripod, screw-in metal spike is easy to install and provides excellent stability on dirt, grass and other uneven terrains.

With removable non-slip rubber foot, it prevents unexpected movement when shooting.

Flexible Monopod

Made of Aluminum Alloy, 5-section monopod tripod supports up to 65 inch of camera equipment. Flexible structure from 45-165cm provides multi-angle and different height. Practical and convenient.

Wonderful Body Material

The Moman Monopod’s Body uses Aviation Aluminum Alloy of extremely qualified strength, forging not only Lightweight & Stability of the tube, but also Elegance & individuality.

Tidy & Smooth Outlook

Leg tube anti-dust technology enables the tube lock system closely attached to the leg tube so to prevent sand and dust from slipping into the tube, which absolutely saves photographers’ time of cleaning and maintenance.

• Dimension:17.32x11.8x7.5 inch. 2 compartments included. Padded removable modular inserts in the upper one (16.54x11.42x5.5 inch) is customized dividers for different cameras,flashes,lens and drones. Another one (16.93x10.63x1.58 inch) is compatible with MacBook Pro 16 A2141;compatible with MacBook Air 13 A2337 M1 A2179 A1932 2020-2018;compatible with MacBook Pro 13 A2338 M1 A2251 A2289 A2159 A1989 A1706 A1708 2020-2016 and most laptops of 13-13.3 inch,14 inch,15 inch,15.6 inch and up to 16 inch.
• Full open design. 2 accessory pockets on the back face can store cables, sd cards, powerbank and other small items. Tripod/monopod holder is featured with 1 secure strap on one bag side. 1 pocket on another side can store umbrella or water bottle(up to maximum 2.5 diameter). 1 anti-theft pocket is designed on the back for your wallet, cellphone and precious items.
• With waterproof hardshell protection in front. The foam padded layer can provide good buffer and protection to your internal stuff against shock and drops. High elastic back cushion can ease your pain after long time take.
• Padded shoulder strap varied from 17.72 to maximum 39.4 inch can be adjusted per personal preference. Clip strap featured on the shoulder strap can hange sunglasses, eyeglasses, towels and clothes. 1 durable handle is also designed to meet different demand. Back trolley belt makes it convenient during the trip. Perfect for men and women - camera enthusiasts.
• This multifunctional camera bag is professionally designed for DSLR / SLR / Mirrorless cameras of different brands. Compatible with Nikon D5600, D5300, D3500, D3400, D3300, D3200; Canon EOS Rebel T6, T6i, SL2 and other standard-size DSLRs. Also desigend to be compatible with DJI Mavic Drone(Mavic 2/Air/Pro). 1 year warranty on each bag.

User questions & answers

Question:	Can I be stored under airplane seat
Answer:	It is a screw type and removable. Would be nice if it came with a replacement foot.
Question:	How do I do the warranty? Strap / seam tore out on side of bag at about 6 months, it's just under 10 months old now
Answer:	Yes, unscrew black base that is above strap.
Question:	How water proof is this bag
Answer:	It does.
Question:	Can this fit the new (thin) 16 inch MacBook Pro
Answer:	Yes, a carrying bag with adjustable shoulder strap and pad was included. BtW, the tripod fits in my LowePro ProTactic AW 450 ii even in the bag.

Product features

MOSISO Camera Backpack Hardshell Protective Case with Tripod Holder & Laptop Compartment

MOSISO Camera Backpack is professionally designed for DSLR / SLR / Mirrorless cameras of different brands. Compatible with Nikon D5600, D5300, D3500, D3400, D3300, D3200; Canon EOS Rebel T6, T6i, SL2 and other standard-size DSLRs. Also desigend to be compatible with DJI Mavic Drone(Mavic 2/Air/Pro).

Enough Space

1. Dimension:17.32 x 11.8 x 7.5 inch. 2 compartments included. Padded removable modular inserts in the upper one (16.54 x 11.42 x 5.5 inch) is customized dividers for different cameras,flashes,lens and drones. Another one (16.93 x 10.63 x 1.58 inch) is compatible with 2019 MacBook Pro 16 with Touch Bar A2141, 2020 2019 2018 MacBook Air 13 A1932, 2020-2016 MacBook Pro 13 A2159 A1989 A1706 A1708 and most Notebook, Chromebook laptop of 13-13.3 inch,14 inch,15 inch,15.6 inch and up to 16 inch.
2. Full open design. 2 accessory pockets on the back face can store cables, sd cards, powerbank and other small items. Tripod/monopod holder is featured with 1 secure strap on one bag side. 1 anti-theft pocket is designed on the back for your wallet, cellphone and precious items.

Super Foam Padded Layer

Super foam padded layer can provide best buffer and protection to your internal stuff against shock and drops.

Hardshell Protection

Waterproof hardshell cover in front provides better protection to your interal camera, drone against drops and shocks.

Practical Use with High-quality Workship

Super foam padded layer and High elastic back cushion can ease your pain after long time take. Perfect for men and women - camera enthusiasts.