9 best vidpro wireless mics

Product description

Get high quality, crystal clear audio with the Vidpro XM-W4 Professional UHF Wireless Microphone System with Lavalier & Case. Designed for professional ENG, EFP and DSLR video recording applications, it offers up to 48 user-selectable UHF channels to choose from. It features a backlit LCD display and compact size for easy concealment, plus a powerful range of up to 300 feet (line of sight). Additional features: over 6 hours of continuous operation; headphone jack; line-in and MIC inputs; mute feature; included XLR and 3.5mm cables; included shoe-mount adapter. Transmitter and receiver require 2x AA batteries each (not included).

• Up to 48 user-selectable UHF channels
• Backlit LCD display
• Transmit range of up to 300 feet
• Over 6 hours of continuous operation
• Includes lavalier microphone

User questions & answers

Question:	Will this work for a canon eos rebel t6i camera
Answer:	The fabric is nice quality but the crotch falls out when you first wash them. I would not recommend these.
Question:	Is this the identical system as the movo wmic
Answer:	There is a cotton crotch. But no elastic on the legs so the slide up the butt
Question:	Can you run 1 mic with two receivers? I need to send audio to two cameras
Answer:	No, but I have health issues and many medications that lead to big fluctuations in weight gain and I find these are super comfortable
Question:	Can i use this mic for canon vixia hf r
Answer:	There is a small seam in the back of the crotch on the inside. The first time that I washed them, the crotch came out of all five pairs. I would not recommend these!

Product description

Complete Set Includes:

2 Wireless Transmitters

1 Wireless Receiver

2 Lavalier Microphones

2 Clip Holders & Foam Windscreens

1 Stereo 3.5mm Audio Cable

1 Stereo XLR Audio Cable

1 Camera Shoe Mount

2 Belt Clips

 

Specifications:

System:

Oscillator Type: PLL Synthesized Control

Carrier Frequency Range: 556mHz-595mHz

556.71 MHz-575.98 MHz (Transmitter A)

576.39 MHz-595.66 MHz (Transmitter B)

Channels: 48

Frequency Response: 40Hz-18KHz +/- 3db

Operational Range: 300’ (100m) unobstructed

Package Dimensions: 11”W x 9.5”H x 2”D

Package Weight: 2lb 2oz

Transmitter:

RF Output Power: 10mw

Spurious Emissions: 250nW or less

Audio input connector: 3.5mm Mini-Jack

Audio input level: -60 DBV

Reference Deviation: 5Khz

Input Frequency: 20Hz – 20KHz

Power Supply: 2 AA Batteries

Dimensions: (HxWxL) 4.2” x 2.6” x 1.1”

Weight: 95g (3.4oz) without batteries

Receiver:

Audio input connector: 3.5mm Mini-Jack

Signal to noise ratio: 70dB

Distortion: 0.8% (-60dBV, 1 KHz input)

Earphone output: 30mW, 15 Ohms/1Khz

Audio Output Level: -60 DBV

Power Supply: 2 AA Batteries

Dimensions: (HxWxL) 4.2” x 2.6” x 1.1”

Weight: 98g (3.5oz) without batteries

• Two body-pack transmitters with lav mics communicate with one receiver unit combining the audio in 2-person interviews, ENG/EFP and DSLR video recording.
• Latest UHF technology delivers ultra-high quality, crystal clear pro-grade audio with 48 user-selectable UHF Channels to choose from.
• Powerful transmit range of up to 300 feet (line of sight) and over 6 hours of continuous operation using 2 AA batteries (sold separately)
• Transmitter units feature backlit LCD displays, line-in and MIC inputs plus a selectable mute switch.
• Dual channel wireless receiver unit features stereo and mono modes plus an additional output for live headphone monitoring.

User questions & answers

Question:	Can this product work for my canon t3i dslr
Answer:	It is powered by an AA battery.

Product description

Record professional quality audio for your video/broadcast productions with the Vidpro XM-55 13-Piece Unidirectional Condenser Shotgun Microphone Kit. The 10.8" long mic can be used in conjunction with any camcorder, professional or amateur, and any video-capable DSLR / HD-DSLR. Its durable aluminum construction makes it great for indoor and outdoor shooting. It features superb off-axis signal attenuation for focused audio pickup. Whether for an interview (on or off camera), film shoots, promo videos, or studio recording, the XM-55 is the ideal complete solution. Items included are: long and short on-camera audio cables with multiple connectors to support XLR, 3.5mm mini, and 6.3mm jacks, adjustable shock and stand mounts with adapters for 5/8" (mic stand), 3/8" (boom pole), 1/4" (tripod) and camera shoe mount applications. Also included is a furry wind muff, foam wind shield, a cushioned hand grip, and a hard carrying case. Key Features:

-Transducer type: Condenser

-Frequency response: 100 Hz - 16 Khz

-Nominal / Load impedance: 1K Ohm / 2.3K Ohm

-Polar pattern: Super Cardioid

-Sensitivity (Short) Long: (-45 db) -38 db

-Power: AA alkaline battery 1.5V (included)

-Output connector: XLR 3-pin male

-Dimensions (Length x Diameter): 10.8 x 0.87 in. (27.3 x 2.2cm)

Weight: 3.5 oz. (100g) without battery

• 11" Condenser Shotgun Video & Broadcast Microphone
• Durable aluminum-alloy construction for indoor & outdoor use
• Superb off-axis signal attenuation provides focused audio pickup
• Perfect for interviews, film shoots, promo videos and studio recording
• Vidpro XM-L Wired Lavalier microphone - 20' Audio Cable Transducer type: Electret Condenser With PHOTO4LESS Cleaning cloth

User questions & answers

Question:	Does this kit include the hard case as shown in the photograph
Answer:	Well, yes.. you can.. its holds the fishing pole, in a very steady position. Absolutely no shake or vibrations. Its a fantastic value addition.
Question:	Does it come with a dead-cat style wind screen as shown in the photos? Also does it use any phantom power
Answer:	Because the rubberized coating, this will prevent the boom pole from rotating. As long as the mic doesn’t rotate on the boom pole, you will be good. I use this to point my mic directly towards my subjects and it works great!
Question:	Will it work on my Canon SX50 HS
Answer:	NO, it work with my 6D Mark2
Question:	Will it work for my canon 60d
Answer:	Yes.
Question:	Does this mic require a battery or phantom power
Answer:	No, the microphone has a hot shoe attachment attached. It is a 1 piece attachment and cannot be dis-connected from the microphone

Product description

The Vidpro XM-W5 is fully compatible with smartphones, cameras, DSLRs and computers. It is ideal for live interviews, ENG/EFP, video production and conferencing purposes. 30 selectable UHF channels ensure crystal clear audio and a range up to 150 feet line of sight. The receiver and transmitter units have easy-to-read LCD displays with volume and frequency control. The receiver also features an additional audio out port for live sound monitoring via headphone. The built-In Lithium-Ion rechargeable batteries provide over 6 hours of continuous operation per charge.

COMPLETE MIC KIT INCLUDES

1 Wireless Transmitter and 1 Receiver unit

Lav Microphone with 5’ cord and lapel clip

Tripod / Hand Grip Combo plus Phone Clamp

Camera Cold Shoe-Mount / Tripod Mount

oft Carry Pouches with Snap Closure

2 Audio Output Cables (TRS to TRS 3.5mm & TRS to TRRS)

2 Micro-USB Charging Cables

SPECIFICATIONS

Connectivity: 3.5mm Mini Plug

Signal to noise ratio: 96dB RF

Output Power: 10dbm

Frequency Range: 560MHZ-590MHZ

Frequency Response: 30-20KHZ

Channels: 30 Selectable UHF

Receiving Sensitivity: -96dBm

Operation range: up to 150 feet (LOS)

• Ideal for Live Interviews, ENG/EFP, Video Production and Video Conferencing
• Fully Compatible with Smartphones, Cameras and Camcorders, DSLRs and Computers
• Features a Live Sound Monitoring Headphone Output on the Receiver Unit
• Up To 150 feet Operating Range and 30 UHF Channels and an Easy-to-read LCD Display
• Built-In Lithium-Ion Rechargeable Batteries offer 6+ Hours of Continuous Operation

• Omni-Directional sound - Solid aluminum construction
• Greatly enhances your range allowing you to record crystal clear audio
• 90-degree swiveling for precise positioning
• Great for use with most Apple iPhone, iPad & iPod Touch devices that utilize a 3.5mm jack
• Extension Cable included

Product description

Transducer: Electret Condenser Polar pattern: Omni-directional Frequency Range: 35Hz ~ 18KHz Signal/Noise: 74dB SPL Sensitivity: -30dB +/- 3dB / 0dB=1V/Pa, 1kHz Output Impedance: 1000 Ohm or less Connector: 3.5mm (1/8”) 3-pole mini-plug Weight: Microphone: 17g, USB Adapter: 9g

• Vidpro XM-L Wired Lavalier microphone - 20' Audio Cable
• Includes lapel clip and foam windscreen
• Sensitivity -30dB +/- 3dB / 0dB = 1V/Pa, 1kHz
• Microphone connects via a 4’ long cable with 3.5mm audio plug
• Designed for use with Gopro Hero4, Hero3+, Hero3 and Hero2 cameras

User questions & answers

Question:	does this mike work with nikon d5000 or d
Answer:	No, the 400-HC-1189-B1 waterblock is not compatible with the FTW3 cards. It is compatible with the Gaming and XC cards, which are non-FTW3 versions.
Question:	Will this work on my Android smartphone
Answer:	The website says it is. EVGA tech support said the 2070 super and the hydro copper block were compatible. However I could not get the die and block to make proper contact. After multiple attempts to reseat the block and after reading similar experiences from other users on reddit and EVGA forums, I decided to go with another manufacture.
Question:	Would this work to get clear audio quality at a concert? Specifically I am interested in using it with android phones, and very loud metal shows
Answer:	I have the MSI RTX 2080 ( Shows as Dell, but I believe it is MSI ) It worked for me, But it SHOULD work on any RTX 2070/2080 & Super variants. Reference-Based board. You could pose the question on The EVGA forums, if you want to confirm it.
Question:	Is there a battery light to indicate whether the battery is good or dead
Answer:	If you're lacking 3 empty slots for pcie this cards gonna be a problem, but if you putting it in a case with a very low profile, this is a good card its almost flush with the mounting bracket. Depending on the benchmarks that come out of the Radeon 7 you might wanna wait on that to be released in late February as the price point is reported to fall about a hundred below this card at time of writing. The amount of heating fins a little bigger on this card as it takes up a full 3 pci-e slots but I doubt its gonna make a huge difference in thermals. There are other slight differences in the cards I prefer EVGA over ASUS so that ended up being why I went with this card.

Product description

Canon Vixia HF R800 Camcorder External Microphone Vidpro XM-L Wired Lavalier microphone - 20' Audio Cable - Transducer type: Electret Condenser

• Vidpro XM-L Wired Lavalier microphone - 20' Audio Cable
• Transducer type: Electret Condenser
• Output Connection: 3.5mm (1/8 inch) 4-Pole Mini-plug - Polar Pattern: Omni-directional
• Frequency Range: 65Hz - 18KHz - Signal/Noise: 74dB SPL
• Sensitivity -30dB +/- 3dB / 0dB = 1V/Pa, 1kHz

User questions & answers

Question:	How would u install this item to the canon vixia hf r800 for the external microphone
Answer:	Open the door on the camera and the port to receive it is labeled for the mic. Also,I had trouble finding a brand of external mic to work consistently on the Vixia. After trying different ones, the only one I found to work dependably is the Vidpro XML that requires an LR44 battery. The battery has to be changed after about 3 hrs. of filming; there is no warning, I learned the hard way. The battery is difficult to put in but I found that a flat blade letter opener, with a rounded, not sharp-end, is the best tool to use to hold the spring back while putting it in. The positive sign marking the correct side for the battery is on the outside of the battery compartment, black on black, not so easy to see either.
Question:	What type of batteries does this take? (looks like a small watch battery
Answer:	Yes, it’s the LR44. Available at a pharmacy near you
Question:	Is this compatible with a splitter cable
Answer:	It will work with a splitter but you may pick up an echo. You can correct that depending on the software you use though.
Question:	Is this compatible with the canon eos m
Answer:	YES it will work for your canon eos m50

Product description

Canon XA30 Camcorder External Microphone Vidpro XM-55 13-Piece Professional Video & Broadcast Unidirectional Condenser Microphone Kit

• Technical Details - Transducer Type: Electret Condenser, Polar Pattern: Supercardioid, Frequency Response: 100 Hz to 16 kHz, Nominal Impedance: 1k, Load Impedance: 2.3k, Sensitivity: -45 dB, short -38 dB, long, Power: 1 x AA alkaline battery, Output Connector: 3-pin XLR, Construction: Aluminum alloy, Dimensions ( x L): 0.87 x 10.8
• Item includes the follwoing features: Suspension Shockmount, Adjustable Shockmount, Camera Shoe Adapter, Furry Wind Muff, Foam Windshield, Cushioned Hand Grip, 26' (7.9m) XLR Cable, 16

User questions & answers

Question:	Does this work with canon rebel t7i camera
Answer:	yes it will work for canon vixia hf r70.
Question:	Does it works with other brands of recording devices and cameras
Answer:	Yes, this will work with an iPhone.
Question:	Will this mount to the Cannon XA40 out of the box
Answer:	It is not wireless as it still plugs into the camcorder into the mic port. It's battery operated. And yes, it will enhance the quality of the built in microphone in your camcorder. You do need a camcorder to use this device.
Question:	Does this work on a canon T
Answer:	I believe it works for all camera with standard 3.5mm Phono connector. I do not know t6i camera, but works for my EOS REBEL camera (older model).
Question:	In the description it said 20 feet of cord, is this accurate
Answer:	I believe yes, although I do not own the Movo.
Question:	Will this mic work on an android phone
Answer:	Don't buy these nonesence.i bought 2 sets and one stopped working.customer service poor and voice quality horrible.run away from it
Question:	Does this work on the canon vixia hf r
Answer:	Yes, the transmitter has a standard 3.5mm audio plug which will attach to the Vixia HF-R700 as well as any other camera with that standard 3.5mm mic input port.
Question:	Has anyone used it for concerts (loud audio) - how did it do
Answer:	I’m not sure how to answer. I’m 38 in hips one pack I would probably say medium/large. But it depends on how tight you like your underwear. I can’t stand feeling restricted. I think the 6 fit me fine but I prefer sleeping in the size 7’s......I know I’m weird! But I sleep in a t-shirt & panties, I like everything to breathe without me freezing, lol
Question:	will it work with a canon vixia hf r
Answer:	Yes, I have the same problem with certain underwear, especially when I'm hot. These are very cool, soft and comfortable as is the waste band.
Question:	Would this work with an iPhone
Answer:	Not on my belly. They seemed a little short in the front actually.
Question:	Is this a wireless mic? If so how does it work such that it can capture a person speaking say 20 feet away
Answer:	I really like them for workouts. They are thin but the crotch area is cotton and the panels are really breathable so they're comfortable and cool.

Product description

Record professional quality audio for your video/broadcast productions with the Vidpro XM-88 13-Piece Unidirectional Condenser Shotgun Microphone Kit. The 14.2" long mic can be used in conjunction with any camcorder, professional or amateur, and any video-capable DSLR / HD-DSLR. Its durable aluminum construction makes it great for indoor and outdoor shooting. It features superb off-axis signal attenuation for focused audio pickup. Whether for an interview (on or off camera), film shoots, promo videos, or studio recording, the XM-88 is the ideal complete solution.

Items included are: long and short on-camera audio cables with multiple connectors to support XLR, 3.5mm mini, and 6.3mm jacks, adjustable shock and stand mounts with adapters for 5/8" (mic stand), 3/8" (boom pole), 1/4" (tripod) and camera shoe mount applications. Also included is a furry wind muff, foam wind shield, a cushioned hand grip, and a hard carrying case.

Key Features:

• Transducer type: Condenser

• Frequency response: 100 Hz - 20 Khz

• Nominal / Load impedance: 1K Ohm / 2.3K Ohm

• Polar pattern: Cardioid & Super Cardioid

• Sensitivity (Short) Long: (-45 db) -38 db

• Power: 48V Phantom / AA alkaline battery 1.5V (included)

• Output connector: XLR 3-pin male

• Dimensions (Length x Diameter): 14.2 x 0.87 in. (36 x 2.2cm)

• Weight: 4.5 oz. (125g) without battery

• Durable aluminum-alloy construction for indoor & outdoor use
• Superb off-axis signal attenuation provides focused audio pickup
• Perfect for interviews, film shoots, promo videos and studio recording
• Includes furry wind muff, foam wind shield, cushioned hand grip, and long and short (on-camera) audio cables with multiple connectors to support XLR, 3.5mm mini and 6.3mm jacks
• Includes adjustable shock mount and stand mount with adapters for 5/8" (mic stand), 3/8" (boom pole), 1/4" (tripod) and camera shoe mount applications

User questions & answers

Question:	Does this mic have low noise? Also is it phantom powered
Answer:	There is a power adapter cable in the box. I own two EVGA cards, one of them is this GTX 1070 SC, another one is GTX 950 SC. They both came with a power adapter cable.
Question:	Would this mic be good as a crowd mic for a baseball game
Answer:	I'm happy that at least 1 dual link DVI is still on video cards, cause I need it for 144hz on my Asus VG248QE 1080p monitor
Question:	Will this microphone fit on a canon xa10 camcorder
Answer:	ftw better overlock and better power parts you should buy ftw version
Question:	Maximum audio recording range
Answer:	yes !Based on the recently released specs of the Gtx 1070, on a single GPU at maxed settings and 60 FPS in many titles.At 1440p the GTX 1070 can get the job done and then some. At 4k the GTX 1080 ...... Solitairegood luck