12 best vidpro dslr microphones

Product description

Complete Set Includes:

2 Wireless Transmitters

1 Wireless Receiver

2 Lavalier Microphones

2 Clip Holders & Foam Windscreens

1 Stereo 3.5mm Audio Cable

1 Stereo XLR Audio Cable

1 Camera Shoe Mount

2 Belt Clips

 

Specifications:

System:

Oscillator Type: PLL Synthesized Control

Carrier Frequency Range: 556mHz-595mHz

556.71 MHz-575.98 MHz (Transmitter A)

576.39 MHz-595.66 MHz (Transmitter B)

Channels: 48

Frequency Response: 40Hz-18KHz +/- 3db

Operational Range: 300’ (100m) unobstructed

Package Dimensions: 11”W x 9.5”H x 2”D

Package Weight: 2lb 2oz

Transmitter:

RF Output Power: 10mw

Spurious Emissions: 250nW or less

Audio input connector: 3.5mm Mini-Jack

Audio input level: -60 DBV

Reference Deviation: 5Khz

Input Frequency: 20Hz – 20KHz

Power Supply: 2 AA Batteries

Dimensions: (HxWxL) 4.2” x 2.6” x 1.1”

Weight: 95g (3.4oz) without batteries

Receiver:

Audio input connector: 3.5mm Mini-Jack

Signal to noise ratio: 70dB

Distortion: 0.8% (-60dBV, 1 KHz input)

Earphone output: 30mW, 15 Ohms/1Khz

Audio Output Level: -60 DBV

Power Supply: 2 AA Batteries

Dimensions: (HxWxL) 4.2” x 2.6” x 1.1”

Weight: 98g (3.5oz) without batteries

• Two body-pack transmitters with lav mics communicate with one receiver unit combining the audio in 2-person interviews, ENG/EFP and DSLR video recording.
• Latest UHF technology delivers ultra-high quality, crystal clear pro-grade audio with 48 user-selectable UHF Channels to choose from.
• Powerful transmit range of up to 300 feet (line of sight) and over 6 hours of continuous operation using 2 AA batteries (sold separately)
• Transmitter units feature backlit LCD displays, line-in and MIC inputs plus a selectable mute switch.
• Dual channel wireless receiver unit features stereo and mono modes plus an additional output for live headphone monitoring.

User questions & answers

Question:	Can this product work for my canon t3i dslr
Answer:	It is powered by an AA battery.

Product description

Record professional quality audio for your video/broadcast productions with the Vidpro XM-55 13-Piece Unidirectional Condenser Shotgun Microphone Kit. The 10.8" long mic can be used in conjunction with any camcorder, professional or amateur, and any video-capable DSLR / HD-DSLR. Its durable aluminum construction makes it great for indoor and outdoor shooting. It features superb off-axis signal attenuation for focused audio pickup. Whether for an interview (on or off camera), film shoots, promo videos, or studio recording, the XM-55 is the ideal complete solution. Items included are: long and short on-camera audio cables with multiple connectors to support XLR, 3.5mm mini, and 6.3mm jacks, adjustable shock and stand mounts with adapters for 5/8" (mic stand), 3/8" (boom pole), 1/4" (tripod) and camera shoe mount applications. Also included is a furry wind muff, foam wind shield, a cushioned hand grip, and a hard carrying case. Key Features:

-Transducer type: Condenser

-Frequency response: 100 Hz - 16 Khz

-Nominal / Load impedance: 1K Ohm / 2.3K Ohm

-Polar pattern: Super Cardioid

-Sensitivity (Short) Long: (-45 db) -38 db

-Power: AA alkaline battery 1.5V (included)

-Output connector: XLR 3-pin male

-Dimensions (Length x Diameter): 10.8 x 0.87 in. (27.3 x 2.2cm)

Weight: 3.5 oz. (100g) without battery

• 11" Condenser Shotgun Video & Broadcast Microphone
• Durable aluminum-alloy construction for indoor & outdoor use
• Superb off-axis signal attenuation provides focused audio pickup
• Perfect for interviews, film shoots, promo videos and studio recording
• Vidpro XM-L Wired Lavalier microphone - 20' Audio Cable Transducer type: Electret Condenser With PHOTO4LESS Cleaning cloth

User questions & answers

Question:	Does this kit include the hard case as shown in the photograph
Answer:	Well, yes.. you can.. its holds the fishing pole, in a very steady position. Absolutely no shake or vibrations. Its a fantastic value addition.
Question:	Does it come with a dead-cat style wind screen as shown in the photos? Also does it use any phantom power
Answer:	Because the rubberized coating, this will prevent the boom pole from rotating. As long as the mic doesn’t rotate on the boom pole, you will be good. I use this to point my mic directly towards my subjects and it works great!
Question:	Will it work on my Canon SX50 HS
Answer:	NO, it work with my 6D Mark2
Question:	Will it work for my canon 60d
Answer:	Yes.
Question:	Does this mic require a battery or phantom power
Answer:	No, the microphone has a hot shoe attachment attached. It is a 1 piece attachment and cannot be dis-connected from the microphone

Product description

Vidpro XM-88 13-Piece Professional Video & Broadcast Unidirectional Condenser Microphone Kit

• Product Highlights: Supercardioid & Cardioid Polar Patterns, Durable Aluminum-Alloy Construction, Powered by Phantom or One AA Battery, Shockmount and Stand Mount Included, Camera Shoe Adapter Included, Foam Windshield and Furry Wind Muff, Cushioned Hand Grip, Foam-Padded Hardcase and Cables Included
• Transducer Type: Electret Condenser, Polar Pattern: Cardioid and Supercardioid, Frequency Response: 100 Hz to 20 kHz, Nominal Impedance: 1kΩ, Load Impedance: 2.3kΩ, Sensitivity: -45 dB, short -38 dB, long, Power: 1 x AA alkaline battery or 48V Phantom power, Output Connector: 3-pin XLR, Construction: Aluminum alloy, Dimensions (Ø x L): 0.87 x 14.2
• In The Box: Suspension Shockmount, Adjustable Shockmount, Camera Shoe Adapter, Furry Wind Muff, Foam Windshield, Cushioned Hand Grip, 26' (7.9m) XLR Cable, 16 Inch (41cm) XLR Cable, 16 Inch (41cm) XLR to 1/8 Inch (3.5mm) Cable, 1/8 Inch (3.5mm) to 1/4 Inch (6.3mm) Adapter, AA Alkaline Battery, Foam-Padded Hard Carry Case, Limited 1-Year Warranty
• Fully Compatible

Product description

Vidpro XM-DLC Dual-Head Interview Lavalier Microphone for DSLR Cameras & Camcorders

User questions & answers

Question:	Will this work with gopro hero 5 camera
Answer:	Normally you wouldn't put this in a mic stand. It's regular use would be in a C-Stand arm so that you can suspend the shotgun mic in either an under-up or and up-down to target the best direction to go at the sound from your subject. To put in a standard mic stand you would have to have something similar to a gaffer clamp like a mafer.

Product description

Vidpro XM-AD5 Mini Pre-Amp Smart Mixer with Dual Condenser Microphones, Designed for DSLR’s, Video Cameras and Phones.



Includes:

1 Mini-XLR to Standard XLR Cable

1 1/8” (3.5mm) Output Cable

1 1/8” (3.5mm) Playback Monitor Cable



Specifications:

Connector Input:

2 3.5mm Stereo Line/Mic Input

1 Mini XLR Mic Input



Connector Output:

1 3.5mm Stereo Line Output

1 Headphone Monitor Jack



Frequency Response: 20Hz to 20KHz (+/-0.5 dB)

Noise: 82 dB @ 1 kHz, -30 dBu input

Distortion: less than 0.03% @ 1 kHz, -30 dBu input

Input 1, 2, XLR: 15 dB / Input 1 and 2 Power: 5V

Level Meter: -18 dB to +3 dB in 3 dB increments

Power Requirement: 9V Alkaline or Lithium

Dimensions: 9.5 L x 3.5 W x 6.5 H cm

Unit Weight: 156g (5.5 oz)



Limited One-Year Vidpro Warranty

• Greatly enhances your microphone’s input signal resulting in clearer, crisp audio recording
• Attaches to the shoe-mount of your camera and accepts all 3.5mm or XLR microphones - Features two 3.5mm mini-jacks plus one XLR mic input
• Easily adjust the input levels using the built-in volume control dial - LCD with independent L/R level meters provide precise channel visualization
• Includes a headphone input jack for audio monitoring during recording
• Powered by 48V Phantom or one 9V battery (not included)

User questions & answers

Question:	could you hook in different mics in the input 1 and input 2 slot. say like a binaural mic pluged into input 1 and a lavalier mic into input
Answer:	Ek water blocks has one. If it isn't out already it should be within a few days. I'm unaware if anyone else has them yet.
Question:	Can i plug this into my zoomq4? how about my iphone 7 plus
Answer:	The RTX 2080 is a 215W part and requires two 8 pin power cables. If you have not overclocked your CPU, are not running water cooling and/or do not have piles of high power requirement USB devices: a good (gold or platinum) 600-650 watt power supply should suffice.
Question:	How many hours is take the batteru
Answer:	Yes, this card can handle this requirement. You will need to reduce your window size to 600 X 400 pixels. I strongly recommend integrating a dilithium crystal SLI development package. I have experienced good success getting almost 57 fps when operating with the GPU cooled to about 3 degrees kelvin while exposing streams of matter (deuterium gas) and antimatter (anti-deuterium) directed into crystallized dilithium SLI package. It is not a an easy lift, but, with careful WIN 10 solitaire play, you should be able to avoid a runaway event. Keep your eyes on the final screen when you play your last game winning card -- avoid allowing your this video card going nova, or even neutron collapsing black hole runaway by closing the game immediately after playing the last card. All said, this should be fully capable of WIN 10 Solitaire if you consider these factors. Keep on playing the good game!
Question:	Can the mikes be removed and wireless receivers plugged in their place
Answer:	Typically C-stands come with a sort of clamp. You can check this item out... it will mount on top of the C-stand, and give you several grips that this support holder can fit into and get clamped Neewer Multi Functional Heavy... https://www.amazon.com/dp/B071R2S6SB?ref=ppx_pop_mob_ap_share

Product description

The Vidpro Model# XM-48 Professional Condenser Shotgun Video Microphone was designed for DSLRs, Camcorders, Smartphones and Video Recorders.

It features a battery-free, compact and lightweight design for effortless portability and use and is simple plug-n-play on virtually all DSLR cameras, video camcorders, smartphones and computers. The microphone is perfect for field recording, interviews, video production, live and studio work. It Includes a foam windshield and two audio cables (one 3.5mm-TRS for cameras plus one 3.5mm-TRRS for phones).

Specifications:

Transducer: Electret Condenser

Polar pattern: Super-Cardioid

Sensitivity: -35dB +/- 3dB @ 1kHz

Signal to Noise Ratio : 76dB

Plug: 3.5mm Audio Plug (TRS & TRRS)

Dimensions: 6.6 x 3 x 2 Inches

Unit Weight: 2.2 oz (63g)

• Compatible with DSLR cameras, video camcorders, smartphones and computers.
• Ideal for field recording, interviews, video production, live and studio work.
• Battery-free, compact and lightweight design for effortless portability and use.
• Made of reinforced ABS with an integrated shock-mount and camera shoe with tripod socket.
• Includes a foam windshield and two audio cables (3.5mm TRS for cameras + TRRS for phones).

Product description

Transducer: Electret Condenser Polar pattern: Omni-directional Frequency Range: 35Hz ~ 18KHz Signal/Noise: 74dB SPL Sensitivity: -30dB +/- 3dB / 0dB=1V/Pa, 1kHz Output Impedance: 1000 Ohm or less Connector: 3.5mm (1/8”) 3-pole mini-plug Weight: Microphone: 17g, USB Adapter: 9g

• Vidpro XM-L Wired Lavalier microphone - 20' Audio Cable
• Includes lapel clip and foam windscreen
• Sensitivity -30dB +/- 3dB / 0dB = 1V/Pa, 1kHz
• Microphone connects via a 4’ long cable with 3.5mm audio plug
• Designed for use with Gopro Hero4, Hero3+, Hero3 and Hero2 cameras

User questions & answers

Question:	does this mike work with nikon d5000 or d
Answer:	No, the 400-HC-1189-B1 waterblock is not compatible with the FTW3 cards. It is compatible with the Gaming and XC cards, which are non-FTW3 versions.
Question:	Will this work on my Android smartphone
Answer:	The website says it is. EVGA tech support said the 2070 super and the hydro copper block were compatible. However I could not get the die and block to make proper contact. After multiple attempts to reseat the block and after reading similar experiences from other users on reddit and EVGA forums, I decided to go with another manufacture.
Question:	Would this work to get clear audio quality at a concert? Specifically I am interested in using it with android phones, and very loud metal shows
Answer:	I have the MSI RTX 2080 ( Shows as Dell, but I believe it is MSI ) It worked for me, But it SHOULD work on any RTX 2070/2080 & Super variants. Reference-Based board. You could pose the question on The EVGA forums, if you want to confirm it.
Question:	Is there a battery light to indicate whether the battery is good or dead
Answer:	If you're lacking 3 empty slots for pcie this cards gonna be a problem, but if you putting it in a case with a very low profile, this is a good card its almost flush with the mounting bracket. Depending on the benchmarks that come out of the Radeon 7 you might wanna wait on that to be released in late February as the price point is reported to fall about a hundred below this card at time of writing. The amount of heating fins a little bigger on this card as it takes up a full 3 pci-e slots but I doubt its gonna make a huge difference in thermals. There are other slight differences in the cards I prefer EVGA over ASUS so that ended up being why I went with this card.

Product description

Two individual lapel microphones combine into one audio cable for recording two people simultaneously 

Features:

• Excellent solution for recording 2-person interviews, vocal duets, conversations etc.
• Designed for use with smartphones, DSLRs, camcorders,  audio recorders and computers.
• Omni-directional condenser polar pattern for improved sensitivity and noise elimination.
• Includes battery, carrying pouch, 2 lapel clips & 2 foam windscreens, 3.5mm to 6.35mm adapter 

Specifications:

Transducer: Electret Condenser

Polar pattern: Omni-directional

Frequency Range: 65Hz~18KHz

Signal / Noise: 74dB SPL

Sensitivity: -30dB +/- 3dB / 0dB=1V/Pa, 1kHz

Output Impedance: 1KOhm or less

Connector: 3.5mm TRRS mini plug

Battery Power: 1x LR44 (included)

Cable length: 13 feet each (4M)

Combined mic gap length: 26 feet

Unit weight: 2.4 oz

 

• Two individual lapel microphones combine into one audio cable for recording two people simultaneously
• Excellent solution for recording 2-person interviews, vocal duets, conversations etc.
• Designed for use with smartphones, DSLRs, camcorders,  audio recorders and computers.
• Omni-directional condenser polar pattern for improved sensitivity and noise elimination
• Includes battery, carrying pouch, 2 lapel clips & 2 foam windscreens, 3.5mm to 6.35mm adapter 

User questions & answers

Question:	Can you mute one microphone, while allowing the other to still record
Answer:	Yes, This product will fit the following part numbers, 08G-P4-3163-KR, 08G-P4-3162-KR, 08G-P4-3162-KP.

Product description

The Vidpro XM-W3 Wireless VHF Lavalier Microphone is compatible with DSLRs, camcorders, smartphones, tablets, audio recorders and computers. It is perfect for interviews, recordings and live streaming sessions. It operates in high-band VHF with 12 switchable channels which offer clear performance and superior sound to a range up to 130 feet*. Dual microphone inputs on the transmitter allow two people to broadcast simultaneously and the receiver features line-out plus a headphone jack for live monitoring of the sound signal. A bright and easy-to-read LED display is perfect for dark environments. Both the transmitter and receiver units are conveniently powered by two AA batteries (not included).

Specifications:

Channels: 12 VHF

Modulation Frequency: DQPSK

Frequency response: 40Hz-18KHz±3dB

Audio input connector: 3.5mm mini jack

Battery: 2x AA in transmitter & Receiver

Dimensions: 4.0 x 2.4 x 1.8 Inches

Antenna Length: 5.5 Inches

Weight: 2.8 oz without batteries

• Compatible with DSLRs, Camcorders, Smartphones, Tablets, Audio Recorders and Computers. Perfect for Interviews.
• High-band VHF operation with 12 switchable channels offer clear performance and superior sound up to 130 feet*
• Dual microphone inputs on the transmitter allow two people to broadcast simultaneously.
• Receiver features line-out plus a headphone jack for live monitoring of sound signal.
• Bright and easy to read LED display is perfect for dark environments. Conveniently powered by two AA batteries

Product description

The Vidpro Model# XM-50 Professional On-Camera Condenser Shotgun Video Microphone was designed for DSLRs, Camcorders, Smartphones Computers and Video Recorders. It features a battery powered (2AA) capsule with three levels of gain control for superb sensitivity and low noise. It also features an audio port for live monitoring of sound via headphones. It is constructed of reinforced ABS with an integrated suspension shock mount and camera shoe with tripod socket which can be used both on-camera or off (attached to tripod or stand). It is simple plug-n-play compatible on virtually all DSLR cameras, video camcorders, smartphones and computers. The microphone is perfect for field recording, interviews, video production, live conferencing and studio work. It Includes a furry windscreen, foam windshield and a soft carry pouch.

 

Specifications:

Transducer: Electret Condenser

Polar pattern: Super-Cardioid

Sensitivity: -32dB +/- 3dB @ 1kHz

Signal to Noise Ratio : 80dB

Dynamic Range: 120dB

Output Impedance: 200 Ohms

Power: 2x AA Batteries (not incl.)

Battery Operating Time: 120 Hours

Gain Control Switch: -10dB, 0, +20dB

Hi-Pass Filter: 2-Step (Flat, 80Hz)

Plug: 3.5mm Audio Plug (TRS)

Dimensions: 6.6 x 3 x 2 Inches

Unit Weight: 12 oz

 

• Compatible with DSLR cameras, video camcorders, smartphones and computers. Ideal for field recording, interviews, video production, live conferencing and studio work.
• Battery powered (2xAA) capsule with three-level gain control for superb sensitivity and low noise. Up to 120 hours of recording time on battery.
• Headphones can be used for live monitoring via the integrated 3.5mm audio port. A coiled audio cable with 3.5mm mini plug connects to your audio equipment.
• Constructed of reinforced ABS with an integrated suspension shock-mount and camera shoe with tripod socket allows mounting both on-camera or on a tripod or stand.
• Includes a furry windshield and foam windscreen plus a soft carry pouch.

Product description

The Vidpro XM-W5 is fully compatible with smartphones, cameras, DSLRs and computers. It is ideal for live interviews, ENG/EFP, video production and conferencing purposes. 30 selectable UHF channels ensure crystal clear audio and a range up to 150 feet line of sight. The receiver and transmitter units have easy-to-read LCD displays with volume and frequency control. The receiver also features an additional audio out port for live sound monitoring via headphone. The built-In Lithium-Ion rechargeable batteries provide over 6 hours of continuous operation per charge.

COMPLETE MIC KIT INCLUDES

1 Wireless Transmitter and 1 Receiver unit

Lav Microphone with 5’ cord and lapel clip

Tripod / Hand Grip Combo plus Phone Clamp

Camera Cold Shoe-Mount / Tripod Mount

oft Carry Pouches with Snap Closure

2 Audio Output Cables (TRS to TRS 3.5mm & TRS to TRRS)

2 Micro-USB Charging Cables

SPECIFICATIONS

Connectivity: 3.5mm Mini Plug

Signal to noise ratio: 96dB RF

Output Power: 10dbm

Frequency Range: 560MHZ-590MHZ

Frequency Response: 30-20KHZ

Channels: 30 Selectable UHF

Receiving Sensitivity: -96dBm

Operation range: up to 150 feet (LOS)

• Ideal for Live Interviews, ENG/EFP, Video Production and Video Conferencing
• Fully Compatible with Smartphones, Cameras and Camcorders, DSLRs and Computers
• Features a Live Sound Monitoring Headphone Output on the Receiver Unit
• Up To 150 feet Operating Range and 30 UHF Channels and an Easy-to-read LCD Display
• Built-In Lithium-Ion Rechargeable Batteries offer 6+ Hours of Continuous Operation

Product description

Record professional quality audio for your video/broadcast productions with the Vidpro XM-88 13-Piece Unidirectional Condenser Shotgun Microphone Kit. The 14.2" long mic can be used in conjunction with any camcorder, professional or amateur, and any video-capable DSLR / HD-DSLR. Its durable aluminum construction makes it great for indoor and outdoor shooting. It features superb off-axis signal attenuation for focused audio pickup. Whether for an interview (on or off camera), film shoots, promo videos, or studio recording, the XM-88 is the ideal complete solution.

Items included are: long and short on-camera audio cables with multiple connectors to support XLR, 3.5mm mini, and 6.3mm jacks, adjustable shock and stand mounts with adapters for 5/8" (mic stand), 3/8" (boom pole), 1/4" (tripod) and camera shoe mount applications. Also included is a furry wind muff, foam wind shield, a cushioned hand grip, and a hard carrying case.

Key Features:

• Transducer type: Condenser

• Frequency response: 100 Hz - 20 Khz

• Nominal / Load impedance: 1K Ohm / 2.3K Ohm

• Polar pattern: Cardioid & Super Cardioid

• Sensitivity (Short) Long: (-45 db) -38 db

• Power: 48V Phantom / AA alkaline battery 1.5V (included)

• Output connector: XLR 3-pin male

• Dimensions (Length x Diameter): 14.2 x 0.87 in. (36 x 2.2cm)

• Weight: 4.5 oz. (125g) without battery

• Durable aluminum-alloy construction for indoor & outdoor use
• Superb off-axis signal attenuation provides focused audio pickup
• Perfect for interviews, film shoots, promo videos and studio recording
• Includes furry wind muff, foam wind shield, cushioned hand grip, and long and short (on-camera) audio cables with multiple connectors to support XLR, 3.5mm mini and 6.3mm jacks
• Includes adjustable shock mount and stand mount with adapters for 5/8" (mic stand), 3/8" (boom pole), 1/4" (tripod) and camera shoe mount applications

User questions & answers

Question:	Does this mic have low noise? Also is it phantom powered
Answer:	There is a power adapter cable in the box. I own two EVGA cards, one of them is this GTX 1070 SC, another one is GTX 950 SC. They both came with a power adapter cable.
Question:	Would this mic be good as a crowd mic for a baseball game
Answer:	I'm happy that at least 1 dual link DVI is still on video cards, cause I need it for 144hz on my Asus VG248QE 1080p monitor
Question:	Will this microphone fit on a canon xa10 camcorder
Answer:	ftw better overlock and better power parts you should buy ftw version
Question:	Maximum audio recording range
Answer:	yes !Based on the recently released specs of the Gtx 1070, on a single GPU at maxed settings and 60 FPS in many titles.At 1440p the GTX 1070 can get the job done and then some. At 4k the GTX 1080 ...... Solitairegood luck